ARM: dts: k2*: Rename the k2* files to keystone-k2* files

As reported in [1], rename the k2* dts files to keystone-* files
this will force consistency throughout.

Script for the same (and hand modified for Makefile and config
files):
for i in arch/arm/dts/k2*
do
	b=`basename $i`;
	git mv $i arch/arm/dts/keystone-$b;
	sed -i -e "s/$b/keystone-$b/g" arch/arm/dts/*[si]
done

This is similar to linux kernel commit 5edafc29829bc ("ARM: dts: k2*: Rename
the k2* files to keystone-k2* files")

[1] http://marc.info/?l=linux-arm-kernel&m=145637407804754&w=2

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

1 files changed, 110 insertions, 0 deletions

diff --git a/arch/arm/dts/keystone-k2g-evm.dts b/arch/arm/dts/keystone-k2g-evm.dts
new file mode 100644
index 0000000000..696a0d7459
--- /dev/null
+++ b/arch/arm/dts/keystone-k2g-evm.dts
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Device Tree Source for K2G EVM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone-k2g.dtsi"
+
+/ {
+	compatible =  "ti,k2g-evm","ti,keystone";
+	model = "Texas Instruments K2G General Purpose EVM";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+		phy-mode = "rgmii-id";
+	};
+};
+
+&gbe0 {
+	phy-handle = <&ethphy0>;
+};
+
+&spi1 {
+	status = "okay";
+
+	spi_nor: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+
+        flash0: m25p80@0 {
+                compatible = "s25fl512s","spi-flash";
+                reg = <0>;
+                spi-tx-bus-width = <1>;
+                spi-rx-bus-width = <4>;
+                spi-max-frequency = <96000000>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+                tshsl-ns = <392>;
+                tsd2d-ns = <392>;
+                tchsh-ns = <100>;
+                tslch-ns = <100>;
+		block-size = <18>;
+
+
+                partition@0 {
+                        label = "QSPI.u-boot-spl-os";
+                        reg = <0x00000000 0x00100000>;
+                };
+                partition@1 {
+                        label = "QSPI.u-boot-env";
+                        reg = <0x00100000 0x00040000>;
+                };
+                partition@2 {
+                        label = "QSPI.skern";
+                        reg = <0x00140000 0x0040000>;
+                };
+                partition@3 {
+                        label = "QSPI.pmmc-firmware";
+                        reg = <0x00180000 0x0040000>;
+                };
+                partition@4 {
+                        label = "QSPI.kernel";
+                        reg = <0x001C0000 0x0800000>;
+                };
+                partition@5 {
+                        label = "QSPI.file-system";
+                        reg = <0x009C0000 0x3640000>;
+                };
+        };
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+};