arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14

This resyncs the dts files for all of the currently in-tree K3
platforms, along with relevant bindings, with the v5.14 Linux Kernel
release.  Of note are that the main-navss/mcu-navss nodes were renamed
to main_navss / mcu_navss and so the u-boot.dtsi files needed to be
updated to match.

Tested on j721e_evm and am65x_evm.

Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 75 insertions, 29 deletions

diff --git a/arch/arm/dts/k3-j7200-common-proc-board.dts b/arch/arm/dts/k3-j7200-common-proc-board.dts
index f0440cda1a..d14f3c18b6 100644
--- a/arch/arm/dts/k3-j7200-common-proc-board.dts
+++ b/arch/arm/dts/k3-j7200-common-proc-board.dts
@@ -17,51 +17,67 @@
 		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
 	};
 
-	aliases {
-		remoteproc0 = &mcu_r5fss0_core0;
-		remoteproc1 = &mcu_r5fss0_core1;
-		remoteproc2 = &main_r5fss0_core0;
-		remoteproc3 = &main_r5fss0_core1;
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
 	};
 
 	vdd_mmc1: fixedregulator-sd {
+		/* Output of TPS22918 */
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_mmc1";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
 		enable-active-high;
+		vin-supply = <&vsys_3v3>;
 		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_sd_dv: gpio-regulator-vdd-sd-dv {
+	vdd_sd_dv: gpio-regulator-TLV71033 {
+		/* Output of TLV71033 */
 		compatible = "regulator-gpio";
-		regulator-name = "vdd_sd_dv";
+		regulator-name = "tlv71033";
 		pinctrl-names = "default";
 		pinctrl-0 = <&vdd_sd_dv_pins_default>;
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
 		gpios = <&main_gpio0 55 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x0
-			  3300000 0x1>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
 	};
 };
 
 &wkup_pmx0 {
-	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
-		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0x100, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
-			J721E_WKUP_IOPAD(0x104, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
-		>;
-	};
-
-	wkup_gpio_pins_default: wkup-gpio-pins-default {
-		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0xd8, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */
-		>;
-	};
-
 	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
@@ -74,7 +90,7 @@
 			J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
 			J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
 			J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
-			J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
 			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
 		>;
 	};
@@ -115,15 +131,15 @@
 		>;
 	};
 
-	vdd_sd_dv_pins_default: vdd_sd_dv_pins_default {
+	main_usbss0_pins_default: main-usbss0-pins-default {
 		pinctrl-single,pins = <
-			J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
+			J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
 		>;
 	};
 
-	main_usbss0_pins_default: main-usbss0-pins-default {
+	vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
 		pinctrl-single,pins = <
-			J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
+			J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
 		>;
 	};
 };
@@ -178,6 +194,22 @@
 	status = "disabled";
 };
 
+&main_gpio2 {
+	status = "disabled";
+};
+
+&main_gpio4 {
+	status = "disabled";
+};
+
+&main_gpio6 {
+	status = "disabled";
+};
+
+&wkup_gpio1 {
+	status = "disabled";
+};
+
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
@@ -288,7 +320,7 @@
 };
 
 &serdes0 {
-	serdes0_pcie_link: link@0 {
+	serdes0_pcie_link: phy@0 {
 		reg = <0>;
 		cdns,num-lanes = <2>;
 		#phy-cells = <0>;
@@ -296,7 +328,7 @@
 		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
 	};
 
-	serdes0_qsgmii_link: link@1 {
+	serdes0_qsgmii_link: phy@1 {
 		reg = <2>;
 		cdns,num-lanes = <1>;
 		#phy-cells = <0>;
@@ -304,3 +336,17 @@
 		resets = <&serdes_wiz0 3>;
 	};
 };
+
+&pcie1_rc {
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie1_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	status = "disabled";
+};