arm: dts: k3-am65: Fix mmc nodes

Because of fundamental interface issues in am65x pg1, only the
initial sdhci1 node at 25 MHz was added in the u-boot.dtsi
from which both the base-board.dts and r5-base-board.dts
inherit the node. Move the node out to k3-am65-main.dtsi
where it belongs and add the board specific properties
in base-board.dts and r5-base-board.dts

This ensures dts compatibility with the kernel dts in the
base-board.dts and enables the SD card interface at 50 MHz
and High Speed mode

While we are here, also fix the main_mmc0_pins_default
property to be included and inherit from the base-board.dts
instead of the u-boot.dtsi

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>

1 files changed, 8 insertions, 59 deletions

diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index 727bc3e8a0e..b030d750f2a 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -21,28 +21,6 @@
 
 &cbass_main{
 	u-boot,dm-spl;
-
-	sdhci1: sdhci@04FA0000 {
-		compatible = "ti,am654-sdhci-5.1";
-		reg = <0x0 0x4FA0000 0x0 0x1000>,
-		      <0x0 0x4FB0000 0x0 0x400>;
-		clocks =<&k3_clks 48 0>, <&k3_clks 48 1>;
-		clock-names = "clk_ahb", "clk_xin";
-		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
-		max-frequency = <25000000>;
-		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-mmc-hs = <0x0>;
-		ti,otap-del-sel-sd-hs = <0x0>;
-		ti,otap-del-sel-sdr12 = <0x0>;
-		ti,otap-del-sel-sdr25 = <0x0>;
-		ti,otap-del-sel-sdr50 = <0x8>;
-		ti,otap-del-sel-sdr104 = <0x7>;
-		ti,otap-del-sel-ddr50 = <0x4>;
-		ti,otap-del-sel-ddr52 = <0x4>;
-		ti,otap-del-sel-hs200 = <0x7>;
-		ti,trm-icp = <0x8>;
-	};
-
 };
 
 &cbass_mcu {
@@ -109,38 +87,6 @@
 		u-boot,dm-spl;
 	};
 
-	main_mmc0_pins_default: main_mmc0_pins_default {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0)	/* (B25) MMC0_CLK */
-			AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0)	/* (B27) MMC0_CMD */
-			AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0)	/* (A26) MMC0_DAT0 */
-			AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0)	/* (E25) MMC0_DAT1 */
-			AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0)	/* (C26) MMC0_DAT2 */
-			AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0)	/* (A25) MMC0_DAT3 */
-			AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0)	/* (E24) MMC0_DAT4 */
-			AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0)	/* (A24) MMC0_DAT5 */
-			AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0)	/* (B26) MMC0_DAT6 */
-			AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0)	/* (D25) MMC0_DAT7 */
-			AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0)	/* (A23) MMC0_SDCD */
-			AM65X_IOPAD(0x01b0, PIN_INPUT, 0)		/* (C25) MMC0_DS */
-		>;
-		u-boot,dm-spl;
-	};
-
-	main_mmc1_pins_default: main_mmc1_pins_default {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0)	/* (C27) MMC1_CLK */
-			AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0)	/* (C28) MMC1_CMD */
-			AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0)	/* (D28) MMC1_DAT0 */
-			AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0)	/* (E27) MMC1_DAT1 */
-			AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0)	/* (D26) MMC1_DAT2 */
-			AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0)	/* (D27) MMC1_DAT3 */
-			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0)	/* (B24) MMC1_SDCD */
-			AM65X_IOPAD(0x02e0, PIN_INPUT, 0)			/* (C24) MMC1_SDWP */
-		>;
-		u-boot,dm-spl;
-	};
-
 	usb0_pins_default: usb0_pins_default {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
@@ -190,17 +136,20 @@
 	status = "okay";
 };
 
+&main_mmc0_pins_default {
+	u-boot,dm-spl;
+};
+
+&main_mmc1_pins_default {
+	u-boot,dm-spl;
+};
+
 &sdhci0 {
 	u-boot,dm-spl;
 };
 
 &sdhci1 {
 	u-boot,dm-spl;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mmc1_pins_default>;
-	sdhci-caps-mask = <0x7 0x0>;
-	ti,driver-strength-ohm = <50>;
 };
 
 &mcu_cpsw {