imx6sx: synchronise device tree with linux

Synchronise device tree with linux v6.0-rc1.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

1 files changed, 80 insertions, 49 deletions

diff --git a/arch/arm/dts/imx6sx.dtsi b/arch/arm/dts/imx6sx.dtsi
index 8d2d396ad1..4d075e2bf7 100644
--- a/arch/arm/dts/imx6sx.dtsi
+++ b/arch/arm/dts/imx6sx.dtsi
@@ -49,6 +49,9 @@
 		spi2 = &ecspi3;
 		spi3 = &ecspi4;
 		spi4 = &ecspi5;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usb2 = &usbh;
 		usbphy0 = &usbphy1;
 		usbphy1 = &usbphy2;
 	};
@@ -87,6 +90,8 @@
 				      "pll1_sw", "pll1_sys";
 			arm-supply = <&reg_arm>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 	};
 
@@ -132,14 +137,10 @@
 		clock-output-names = "anaclk2";
 	};
 
-	tempmon: tempmon {
-		compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
-		interrupt-parent = <&gpc>;
-		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+	mqs: mqs {
+		compatible = "fsl,imx6sx-mqs";
+		gpr = <&gpr>;
+		status = "disabled";
 	};
 
 	pmu {
@@ -153,7 +154,7 @@
 		#phy-cells = <0>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -181,7 +182,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -215,7 +216,7 @@
 			clocks = <&clks IMX6SX_CLK_APBH_DMA>;
 		};
 
-		gpmi: gpmi-nand@1806000{
+		gpmi: nand-controller@1806000{
 			compatible = "fsl,imx6sx-gpmi-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -333,6 +334,7 @@
 				};
 
 				esai: esai@2024000 {
+					compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
 					reg = <0x02024000 0x4000>;
 					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
@@ -342,6 +344,9 @@
 						 <&clks IMX6SX_CLK_SPBA>;
 					clock-names = "core", "mem", "extal",
 						      "fsys", "spba";
+					dmas = <&sdma 23 21 0>,
+					       <&sdma 24 21 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -388,18 +393,28 @@
 				};
 
 				asrc: asrc@2034000 {
+					compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc";
 					reg = <0x02034000 0x4000>;
 					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
-						 <&clks IMX6SX_CLK_ASRC_IPG>,
-						 <&clks IMX6SX_CLK_SPDIF>,
-						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "mem", "ipg", "asrck", "spba";
-					dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
-					       <&sdma 19 20 1>, <&sdma 20 20 1>,
-					       <&sdma 21 20 1>, <&sdma 22 20 1>;
+					clocks = <&clks IMX6SX_CLK_ASRC_IPG>,
+						<&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>,
+						<&clks IMX6SX_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>,
+					       <&sdma 19 23 1>, <&sdma 20 23 1>,
+					       <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
 					status = "okay";
 				};
 			};
@@ -411,7 +426,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM1>,
 					 <&clks IMX6SX_CLK_PWM1>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm2: pwm@2084000 {
@@ -421,7 +436,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM2>,
 					 <&clks IMX6SX_CLK_PWM2>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm3: pwm@2088000 {
@@ -431,7 +446,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM3>,
 					 <&clks IMX6SX_CLK_PWM3>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm4: pwm@208c000 {
@@ -441,7 +456,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM4>,
 					 <&clks IMX6SX_CLK_PWM4>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			flexcan1: can@2090000 {
@@ -451,7 +466,7 @@
 				clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
 					 <&clks IMX6SX_CLK_CAN1_SERIAL>;
 				clock-names = "ipg", "per";
-				fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
+				fsl,stop-mode = <&gpr 0x10 1>;
 				status = "disabled";
 			};
 
@@ -462,11 +477,11 @@
 				clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
 					 <&clks IMX6SX_CLK_CAN2_SERIAL>;
 				clock-names = "ipg", "per";
-				fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
+				fsl,stop-mode = <&gpr 0x10 2>;
 				status = "disabled";
 			};
 
-			gpt: gpt@2098000 {
+			gpt: timer@2098000 {
 				compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -559,7 +574,7 @@
 				gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
 			};
 
-			kpp: kpp@20b8000 {
+			kpp: keypad@20b8000 {
 				compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -567,14 +582,14 @@
 				status = "disabled";
 			};
 
-			wdog1: wdog@20bc000 {
+			wdog1: watchdog@20bc000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_IPG>;
 			};
 
-			wdog2: wdog@20c0000 {
+			wdog2: watchdog@20c0000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -582,7 +597,7 @@
 				status = "disabled";
 			};
 
-			clks: ccm@20c4000 {
+			clks: clock-controller@20c4000 {
 				compatible = "fsl,imx6sx-ccm";
 				reg = <0x020c4000 0x4000>;
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
@@ -594,7 +609,7 @@
 
 			anatop: anatop@20c8000 {
 				compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
-					     "syscon", "simple-bus";
+					     "syscon", "simple-mfd";
 				reg = <0x020c8000 0x1000>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
@@ -694,6 +709,16 @@
 					anatop-min-voltage = <725000>;
 					anatop-max-voltage = <1450000>;
 				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+				};
 			};
 
 			usbphy1: usbphy@20c9000 {
@@ -752,7 +777,7 @@
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			src: src@20d8000 {
+			src: reset-controller@20d8000 {
 				compatible = "fsl,imx6sx-src", "fsl,imx51-src";
 				reg = <0x020d8000 0x4000>;
 				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -806,7 +831,7 @@
 				};
 			};
 
-			iomuxc: iomuxc@20e0000 {
+			iomuxc: pinctrl@20e0000 {
 				compatible = "fsl,imx6sx-iomuxc";
 				reg = <0x020e0000 0x4000>;
 			};
@@ -837,7 +862,7 @@
 			reg = <0x02100000 0x100000>;
 			ranges;
 
-			crypto: caam@2100000 {
+			crypto: crypto@2100000 {
 				compatible = "fsl,sec-v4.0";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -850,13 +875,13 @@
 					 <&clks IMX6SX_CLK_EIM_SLOW>;
 				clock-names = "mem", "aclk", "ipg", "emi_slow";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x2000 0x1000>;
 					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
@@ -928,6 +953,7 @@
 					      "enet_clk_ref", "enet_out";
 				fsl,num-tx-queues = <3>;
 				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&gpr 0x10 3>;
 				status = "disabled";
 			};
 
@@ -940,7 +966,7 @@
 				status = "disabled";
 			};
 
-			usdhc1: usdhc@2190000 {
+			usdhc1: mmc@2190000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -952,7 +978,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@2194000 {
+			usdhc2: mmc@2194000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -964,7 +990,7 @@
 				status = "disabled";
 			};
 
-			usdhc3: usdhc@2198000 {
+			usdhc3: mmc@2198000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -976,7 +1002,7 @@
 				status = "disabled";
 			};
 
-			usdhc4: usdhc@219c000 {
+			usdhc4: mmc@219c000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -1037,6 +1063,7 @@
 					 <&clks IMX6SX_CLK_ENET_PTP>;
 				clock-names = "ipg", "ahb", "ptp",
 					      "enet_clk_ref", "enet_out";
+				fsl,stop-mode = <&gpr 0x10 4>;
 				status = "disabled";
 			};
 
@@ -1051,13 +1078,17 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp@21bc000 {
+			ocotp: efuse@21bc000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6sx-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6SX_CLK_OCOTP>;
 
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
 				tempmon_calib: calib@38 {
 					reg = <0x38 4>;
 				};
@@ -1289,7 +1320,7 @@
 				status = "disabled";
 			};
 
-			wdog3: wdog@2288000 {
+			wdog3: watchdog@2288000 {
 				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 				reg = <0x02288000 0x4000>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -1329,7 +1360,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM5>,
 					 <&clks IMX6SX_CLK_PWM5>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm6: pwm@22a8000 {
@@ -1339,7 +1370,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM6>,
 					 <&clks IMX6SX_CLK_PWM6>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm7: pwm@22ac000 {
@@ -1349,7 +1380,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM7>,
 					 <&clks IMX6SX_CLK_PWM7>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm8: pwm@22b0000 {
@@ -1359,20 +1390,20 @@
 				clocks = <&clks IMX6SX_CLK_PWM8>,
 					 <&clks IMX6SX_CLK_PWM8>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 		};
 
 		pcie: pcie@8ffc000 {
-			compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
+			compatible = "fsl,imx6sx-pcie";
 			reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
 			reg-names = "dbi", "config";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
 			bus-range = <0x00 0xff>;
-			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000 /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";