ARM: OMAP4+: emif: Detect SDRAM from SDRAM config register

Now SDRAM initialization is done on the basis of omap revision.
Instead this should be done on basis of SDRAM type read from
EMIF_SDRAM_CONFIG register. This will be helpful to avoid
unnessecary cpu checks for new boards

Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>

4 files changed, 22 insertions, 7 deletions

diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index b1fd277d6d..1f95fba8cd 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -36,6 +36,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/utils.h>
 #include <asm/omap_gpio.h>
+#include <asm/emif.h>
 
 #ifndef CONFIG_SPL_BUILD
 /*
@@ -299,7 +300,7 @@ static void setup_dplls(void)
 	 * Core DPLL will be locked after setting up EMIF
 	 * using the FREQ_UPDATE method(freq_update_core())
 	 */
-	if (omap_revision() != OMAP5432_ES1_0)
+	if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
 		do_setup_dpll(&prcm->cm_clkmode_dpll_core, params,
 							DPLL_NO_LOCK, "core");
 	else
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 88253cf8ce..8864abc16e 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -66,6 +66,19 @@ inline u32 emif_num(u32 base)
 		return 0;
 }
 
+/*
+ * Get SDRAM type connected to EMIF.
+ * Assuming similar SDRAM parts are connected to both EMIF's
+ * which is typically the case. So it is sufficient to get
+ * SDRAM type from EMIF1.
+ */
+u32 emif_sdram_type()
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
+
+	return (readl(&emif->emif_sdram_config) &
+		EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT;
+}
 
 static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
 {
@@ -1079,7 +1092,7 @@ static void do_sdram_init(u32 base)
 	 * OPP to another)
 	 */
 	if (!(in_sdram || warm_reset())) {
-		if (omap_revision() != OMAP5432_ES1_0)
+		if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
 			lpddr2_init(base, regs);
 		else
 			ddr3_init(base, regs);
@@ -1264,7 +1277,7 @@ void dmm_init(u32 base)
 void sdram_init(void)
 {
 	u32 in_sdram, size_prog, size_detect;
-	u32 omap_rev = omap_revision();
+	u32 sdram_type = emif_sdram_type();
 
 	debug(">>sdram_init()\n");
 
@@ -1275,7 +1288,7 @@ void sdram_init(void)
 	debug("in_sdram = %d\n", in_sdram);
 
 	if (!(in_sdram || warm_reset())) {
-		if (omap_rev != OMAP5432_ES1_0)
+		if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2)
 			bypass_dpll(&prcm->cm_clkmode_dpll_core);
 		else
 			writel(CM_DLL_CTRL_NO_OVERRIDE, &prcm->cm_dll_ctrl);
@@ -1298,7 +1311,7 @@ void sdram_init(void)
 	}
 
 	/* for the shadow registers to take effect */
-	if (omap_rev != OMAP5432_ES1_0)
+	if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2)
 		freq_update_core();
 
 	/* Do some testing after the init */
diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c
index eecfbade35..1f3369268d 100644
--- a/arch/arm/cpu/armv7/omap5/clocks.c
+++ b/arch/arm/cpu/armv7/omap5/clocks.c
@@ -36,6 +36,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/utils.h>
 #include <asm/omap_gpio.h>
+#include <asm/emif.h>
 
 #ifndef CONFIG_SPL_BUILD
 /*
@@ -279,7 +280,7 @@ void scale_vcores(void)
 	do_scale_vcore(SMPS_REG_ADDR_12_MPU, volt_mpu);
 	do_scale_vcore(SMPS_REG_ADDR_45_IVA, volt_mm);
 
-	if (omap_revision() == OMAP5432_ES1_0) {
+	if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) {
 		/* Configure LDO SRAM "magic" bits */
 		writel(2, &prcm->prm_sldo_core_setup);
 		writel(2, &prcm->prm_sldo_mpu_setup);
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index d0c3ff7021..4def422df1 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -191,7 +191,7 @@ void do_io_settings(void)
 		       (sc_fast << 17) | (sc_fast << 14);
 	writel(io_settings, &(ioregs_base->control_smart3io_padconf_1));
 
-	if (omap_revision() <= OMAP5430_ES1_0)
+	if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2)
 		io_settings_lpddr2();
 	else
 		io_settings_ddr3();