Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (212 commits)
  ARM: cache: Move the cp15 CR register read before flushing the cache.
  ARM: introduce arch_early_init_r()
  PXA: Enable CONFIG_PREBOOT on zipitz2
  ARM: mx28: Remove CONFIG_ARCH_CPU_INIT
  No need to define CONFIG_ARCH_CPU_INIT.
  add new board vl_ma2sc
  MTD: SPEAr SMI: Add write support for length < 4 bytes
  i2c: designware_i2c.c: Add support for the "i2c probe" command
  rtc/m41t62: Add support for M41T82 with HT (Halt Update)
  SPL: ARM: spear: Add SPL support for SPEAr600 platform
  Makefile: Add u-boot.spr build target (SPEAr)
  SPL: ARM: spear: Remove some objects from SPL build
  SPL: lib/Makefile: Add crc32.c to SPL build
  SPL: common/Makefile: Add image.c to SPL build
  arm: Don't use printf() in SPL builds
  GPIO: Add SPEAr GPIO driver
  net: Multiple updates/enhancements to designware.c
  cleanup/SPEAr: Define configuration flags more elegantly
  cleanup/SPEAr: Remove unnecessary parenthesis
  SPEAr: Correct SoC ID offset in misc configuration space
  SPEAr: explicitly select clk src for UART
  SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access
  SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb
  SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro
  SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE
  SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION
  SPEAr: Enable dcache for fast file transfer
  SPEAr: Enable autoneg for ethernet
  SPEAr: Enable udc and usb-console support only for usbtty configuration
  SPEAr: Enable usb device high speed support
  SPEAr: Initialize SNOR in early_board_init_f
  SPEAr: Change the default environment variables
  SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)
  SPEAr: Add configuration options for spear3xx and spear6xx boards
  SPEAr: Add basic arch related support for SPEAr SoCs
  SPEAr: Add interface information in initialization
  SPEAr: Add macb driver support for spear310 and spear320
  SPEAr: Configure network support for spear SoCs
  SPEAr: Place ethaddr write and read within CONFIG_CMD_NET
  SPEAr: Eliminate dependency on Xloader table
  SPEAr: Fix ARM relocation support
  st_smi: Fixed page size for Winbond W25Q128FV flash
  st_smi: Change timeout loop implementation
  st_smi: Fix bug in flash_print_info()
  st_smi: Change the flash probing method
  st_smi: Removed no needed dependency on ST_M25Pxx_ID
  st_smi: Fix smi read status
  st_smi: Move status register read before modifying ctrl register
  st_smi: Read status until timeout happens
  st_smi: Enhance the error handling
  st_smi: Change SMI timeout values
  st_smi: Return error in case TFF is not set
  st_smi: Add support for SPEAr SMI driver
  mtd/NAND: Remove obsolete SPEAr specific NAND drivers
  SPEAr: Configure FSMC driver for NAND interface
  mtd/NAND: Add FSMC driver support
  arm/km: remove calls to kw_gpio_* in board_early_init_f
  arm/km: add implementation for read_dip_switch
  arm/km: support the 2 PCIe fpga resets
  arm/km: skip FPGA config when already configured
  arm/km: redefine piggy 4 reg names to avoid conflicts
  arm/km: cleanup km_kirkwood boards
  arm/km: enable BOCO2 FPGA download support
  arm/km: remove portl2.h and use km_kirkwood instead
  arm/km: convert mgcoge3un target to km_kirkwood
  arm/km: add kmcoge5un board support
  arm/km: add kmnusa board support
  arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0
  cm-t35: fix incorrect NAND_ECC layout selection
  ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls.
  ARM: OMAP4/5: Move USB pads to essential list.
  ARM: OMAP4/5: Move USB clocks to essential group.
  ARM: OMAP4/5: Move gpmc clocks to essential group.
  ARM: OMAP4+: Move external phy initialisations to arch specific place.
  omap4: Use a smaller M,N couple for IVA DPLL
  da850/omap-l138: Enable auto negotiation in RMII mode
  omap: am33xx: accomodate input clocks other than 24 Mhz
  omap: emif: fix bug in manufacturer code test
  omap: emif: deal with rams that return duplicate mr data on all byte lanes
  OMAP4+: Force DDR in self-refresh after warm reset
  OMAP4+: Handle sdram init after warm reset
  ARM: OMAP3+: Detect reset type
  arm: bugfix: Move vector table before jumping relocated code
  Kirkwood: Add support for Ka-Ro TK71
  arm/km: use spi claim bus to switch between SPI and NAND
  arm/kirkwood: protect the ENV_SPI #defines
  ARM: don't probe PHY address for LaCie boards
  lacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2
  lacie_kw: fix SDRAM banks number for net2big_v2
  Kirkwood: add lschlv2 and lsxhl board support
  net: add helper to generate random mac address
  net: use common rand()/srand() functions
  lib: add rand() function
  kwboot: boot kirkwood SoCs over a serial link
  kw_spi: add weak functions board_spi_claim/release_bus
  kw_spi: support spi_claim/release_bus functions
  kw_spi: backup and reset the MPP of the chosen CS pin
  kirkwood: fix calls to kirkwood_mpp_conf
  kirkwood: add save functionality kirkwood_mpp_conf function
  km_arm: use filesize for erase in update command
  arm/km: enable mii cmd
  arm/km: remove CONFIG_RESET_PHY_R
  arm/km: change maintainer for mgcoge3un
  arm/km: fix wrong comment in SDRAM config for mgcoge3un
  arm/km: use ARRAY_SIZE macro
  arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE
  arm/km: add piggy mac adress offset for mgcoge3un
  arm/km: add board type to boards.cfg
  AT91SAM9*: Change kernel address in dataflash to match u-boot's size
  ATMEL/PIO: Enable new feature of PIO on Atmel device
  ehci-atmel: fix compiler warning
  AT91: at91sam9m10g45ek : Enable EHCI instead OHCI
  Atmel : usb : add EHCI driver for Atmel SoC
  Fix: AT91SAM9263 nor flash usage
  Fix: broken boot message at serial line on AT91SAM9263-EK board
  i.MX6 USDHC: Use the ESDHC clock
  mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register
  i.MX28: Add function to adjust memory parameters
  mx28evk: Fix PSWITCH key position
  mx53smd: Remove CONFIG_SYS_I2C_SLAVE definition
  mx53loco: Remove CONFIG_SYS_I2C_SLAVE definition
  mx53evk: Remove CONFIG_SYS_I2C_SLAVE definition
  mx53ard: Remove CONFIG_SYS_I2C_SLAVE definition
  mx35pdk: Remove CONFIG_SYS_I2C_SLAVE definition
  imx31_phycore: Remove CONFIG_SYS_I2C_SLAVE definition
  mx53ard: Remove unused CONFIG_MII_GASKET
  mx6: Avoid writing to read-only bits in imximage.cfg
  m28evk: use same notation to alloc the 128kB stack
  ...

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 220 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
new file mode 100644
index 0000000000..d2b7d2cba7
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics.
+ * Abhilash Kesavan <a.kesavan@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/sromc.h>
+
+static void exynos5_uart_config(int peripheral)
+{
+	struct exynos5_gpio_part1 *gpio1 =
+		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+	struct s5p_gpio_bank *bank;
+	int i, start, count;
+
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+		bank = &gpio1->a0;
+		start = 0;
+		count = 4;
+		break;
+	case PERIPH_ID_UART1:
+		bank = &gpio1->a0;
+		start = 4;
+		count = 4;
+		break;
+	case PERIPH_ID_UART2:
+		bank = &gpio1->a1;
+		start = 0;
+		count = 4;
+		break;
+	case PERIPH_ID_UART3:
+		bank = &gpio1->a1;
+		start = 4;
+		count = 2;
+		break;
+	}
+	for (i = start; i < start + count; i++) {
+		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
+		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+	}
+}
+
+static int exynos5_mmc_config(int peripheral, int flags)
+{
+	struct exynos5_gpio_part1 *gpio1 =
+		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+	struct s5p_gpio_bank *bank, *bank_ext;
+	int i;
+
+	switch (peripheral) {
+	case PERIPH_ID_SDMMC0:
+		bank = &gpio1->c0;
+		bank_ext = &gpio1->c1;
+		break;
+	case PERIPH_ID_SDMMC1:
+		bank = &gpio1->c1;
+		bank_ext = NULL;
+		break;
+	case PERIPH_ID_SDMMC2:
+		bank = &gpio1->c2;
+		bank_ext = &gpio1->c3;
+		break;
+	case PERIPH_ID_SDMMC3:
+		bank = &gpio1->c3;
+		bank_ext = NULL;
+		break;
+	}
+	if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
+		debug("SDMMC device %d does not support 8bit mode",
+				peripheral);
+		return -1;
+	}
+	if (flags & PINMUX_FLAG_8BIT_MODE) {
+		for (i = 3; i <= 6; i++) {
+			s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3));
+			s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP);
+			s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
+		}
+	}
+	for (i = 0; i < 2; i++) {
+		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
+		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+	}
+	for (i = 3; i <= 6; i++) {
+		s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+		s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
+		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+	}
+	return 0;
+}
+
+static void exynos5_sromc_config(int flags)
+{
+	struct exynos5_gpio_part1 *gpio1 =
+		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+	int i;
+
+	/*
+	 * SROM:CS1 and EBI
+	 *
+	 * GPY0[0]	SROM_CSn[0]
+	 * GPY0[1]	SROM_CSn[1](2)
+	 * GPY0[2]	SROM_CSn[2]
+	 * GPY0[3]	SROM_CSn[3]
+	 * GPY0[4]	EBI_OEn(2)
+	 * GPY0[5]	EBI_EEn(2)
+	 *
+	 * GPY1[0]	EBI_BEn[0](2)
+	 * GPY1[1]	EBI_BEn[1](2)
+	 * GPY1[2]	SROM_WAIT(2)
+	 * GPY1[3]	EBI_DATA_RDn(2)
+	 */
+	s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),
+				GPIO_FUNC(2));
+	s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
+	s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
+
+	for (i = 0; i < 4; i++)
+		s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
+
+	/*
+	 * EBI: 8 Addrss Lines
+	 *
+	 * GPY3[0]	EBI_ADDR[0](2)
+	 * GPY3[1]	EBI_ADDR[1](2)
+	 * GPY3[2]	EBI_ADDR[2](2)
+	 * GPY3[3]	EBI_ADDR[3](2)
+	 * GPY3[4]	EBI_ADDR[4](2)
+	 * GPY3[5]	EBI_ADDR[5](2)
+	 * GPY3[6]	EBI_ADDR[6](2)
+	 * GPY3[7]	EBI_ADDR[7](2)
+	 *
+	 * EBI: 16 Data Lines
+	 *
+	 * GPY5[0]	EBI_DATA[0](2)
+	 * GPY5[1]	EBI_DATA[1](2)
+	 * GPY5[2]	EBI_DATA[2](2)
+	 * GPY5[3]	EBI_DATA[3](2)
+	 * GPY5[4]	EBI_DATA[4](2)
+	 * GPY5[5]	EBI_DATA[5](2)
+	 * GPY5[6]	EBI_DATA[6](2)
+	 * GPY5[7]	EBI_DATA[7](2)
+	 *
+	 * GPY6[0]	EBI_DATA[8](2)
+	 * GPY6[1]	EBI_DATA[9](2)
+	 * GPY6[2]	EBI_DATA[10](2)
+	 * GPY6[3]	EBI_DATA[11](2)
+	 * GPY6[4]	EBI_DATA[12](2)
+	 * GPY6[5]	EBI_DATA[13](2)
+	 * GPY6[6]	EBI_DATA[14](2)
+	 * GPY6[7]	EBI_DATA[15](2)
+	 */
+	for (i = 0; i < 8; i++) {
+		s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
+		s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
+
+		s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
+		s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
+
+		s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
+		s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
+	}
+}
+
+static int exynos5_pinmux_config(int peripheral, int flags)
+{
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+		exynos5_uart_config(peripheral);
+		break;
+	case PERIPH_ID_SDMMC0:
+	case PERIPH_ID_SDMMC1:
+	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC3:
+		return exynos5_mmc_config(peripheral, flags);
+	case PERIPH_ID_SROMC:
+		exynos5_sromc_config(flags);
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+
+	return 0;
+}
+
+int exynos_pinmux_config(int peripheral, int flags)
+{
+	if (cpu_is_exynos5())
+		return exynos5_pinmux_config(peripheral, flags);
+	else {
+		debug("pinmux functionality not supported\n");
+		return -1;
+	}
+}