tegra: move to common SPL framework

Change tegra SPL to use common SPL framework.  Any tegra specific
initialization is now done in spl_board_init() instead of
board_init_f()/board_init_r().  Only one SPL boot target is supported
on tegra, which is boot to RAM image.  jump_to_image_no_args() must be
overridden on tegra so the host CPU can be initialized.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

1 files changed, 14 insertions, 77 deletions

diff --git a/arch/arm/cpu/arm720t/tegra-common/spl.c b/arch/arm/cpu/arm720t/tegra-common/spl.c
index 0d37ce83c84..c280ab7d0f9 100644
--- a/arch/arm/cpu/arm720t/tegra-common/spl.c
+++ b/arch/arm/cpu/arm720t/tegra-common/spl.c
@@ -23,105 +23,42 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <nand.h>
-#include <mmc.h>
-#include <fat.h>
-#include <version.h>
-#include <i2c.h>
-#include <image.h>
-#include <malloc.h>
-#include <linux/compiler.h>
 #include "cpu.h"
+#include <spl.h>
 
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/tegra.h>
 #include <asm/arch-tegra/board.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/pmc.h>
-#include <asm/arch-tegra/scu.h>
-#include <asm/arch-tegra/sys_proto.h>
+#include <asm/arch/spl.h>
 
-DECLARE_GLOBAL_DATA_PTR;
 
-/* Define global data structure pointer to it*/
-static gd_t gdata __attribute__ ((section(".data")));
-static bd_t bdata __attribute__ ((section(".data")));
-
-inline void hang(void)
+void spl_board_init(void)
 {
-	puts("### ERROR ### Please RESET the board ###\n");
-	for (;;)
-		;
-}
+	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+
+	/* enable JTAG */
+	writel(0xC0, &pmt->pmt_cfg_ctl);
 
-void board_init_f(ulong dummy)
-{
 	board_init_uart_f();
 
 	/* Initialize periph GPIOs */
 	gpio_early_init_uart();
 
-	/*
-	 * We call relocate_code() with relocation target same as the
-	 * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting
-	 * skipped. Instead, only .bss initialization will happen. That's
-	 * all we need
-	 */
-	debug(">>board_init_f()\n");
-	relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE);
+	clock_early_init();
+	preloader_console_init();
 }
 
-/* This requires UART clocks to be enabled */
-static void preloader_console_init(void)
+u32 spl_boot_device(void)
 {
-	const char *u_boot_rev = U_BOOT_VERSION;
-
-	gd = &gdata;
-	gd->bd = &bdata;
-	gd->flags |= GD_FLG_RELOC;
-	gd->baudrate = CONFIG_BAUDRATE;
-
-	serial_init();		/* serial communications setup */
-
-	gd->have_console = 1;
-
-	/* Avoid a second "U-Boot" coming from this string */
-	u_boot_rev = &u_boot_rev[7];
-
-	printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE,
-		U_BOOT_TIME);
+	return BOOT_DEVICE_RAM;
 }
 
-void board_init_r(gd_t *id, ulong dummy)
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 {
-	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
-
-	/* enable JTAG */
-	writel(0xC0, &pmt->pmt_cfg_ctl);
-
-	debug(">>spl:board_init_r()\n");
-
-	mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
-			CONFIG_SYS_SPL_MALLOC_SIZE);
-
-#ifdef CONFIG_SPL_BOARD_INIT
-	spl_board_init();
-#endif
+	debug("image entry point: 0x%X\n", spl_image->entry_point);
 
-	clock_early_init();
-	serial_init();
-	preloader_console_init();
-
-	start_cpu((u32)CONFIG_SYS_TEXT_BASE);
+	start_cpu((u32)spl_image->entry_point);
 	halt_avp();
-	/* not reached */
-}
-
-int board_usb_init(const void *blob)
-{
-	return 0;
 }