dm: Change CMD_DM enabling

CMD_DM is used for debug purpose and it shouldn't be enabled by default
via Kconfig. Unfortunately this is in the tree for quite a long time
that's why solution is to use imply DM for all targets which are
enabling DM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>

1 files changed, 25 insertions, 0 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b29e8f75d23..a047552ed32 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -441,6 +441,7 @@ config ARCH_MVEBU
 	select OF_CONTROL
 	select OF_SEPARATE
 	select SPI
+	imply CMD_DM
 
 config TARGET_DEVKIT3250
 	bool "Support devkit3250"
@@ -499,6 +500,7 @@ config TARGET_STV0991
 	select PL01X_SERIAL
 	select SPI
 	select SPI_FLASH
+	imply CMD_DM
 
 config TARGET_X600
 	bool "Support x600"
@@ -533,6 +535,7 @@ config ARCH_BCM283X
 	select OF_CONTROL
 	select PL01X_SERIAL
 	select SERIAL_SEARCH_ALL
+	imply CMD_DM
 	imply FAT_WRITE
 
 config TARGET_VEXPRESS_CA15_TC2
@@ -548,6 +551,7 @@ config ARCH_BCMSTB
 	select DM
 	select OF_CONTROL
 	select OF_PRIOR_STAGE
+	imply CMD_DM
 	help
 	  This enables support for Broadcom ARM-based set-top box
 	  chipsets, including the 7445 family of chips.
@@ -607,6 +611,7 @@ config ARCH_EXYNOS
 	select DM_SPI
 	select DM_SPI_FLASH
 	select SPI
+	imply CMD_DM
 	imply FAT_WRITE
 
 config ARCH_S5PC1XX
@@ -616,6 +621,7 @@ config ARCH_S5PC1XX
 	select DM_GPIO
 	select DM_I2C
 	select DM_SERIAL
+	imply CMD_DM
 
 config ARCH_HIGHBANK
 	bool "Calxeda Highbank"
@@ -627,6 +633,7 @@ config ARCH_INTEGRATOR
 	select DM
 	select DM_SERIAL
 	select PL01X_SERIAL
+	imply CMD_DM
 
 config ARCH_KEYSTONE
 	bool "TI Keystone"
@@ -660,6 +667,7 @@ config ARCH_MX8M
 	select ARM64
 	select DM
 	select SUPPORT_SPL
+	imply CMD_DM
 
 config ARCH_MX23
 	bool "NXP i.MX23 family"
@@ -724,6 +732,7 @@ config ARCH_OWL
 	select DM
 	select DM_SERIAL
 	select OF_CONTROL
+	imply CMD_DM
 
 config ARCH_QEMU
 	bool "QEMU Virtual Platform"
@@ -731,12 +740,14 @@ config ARCH_QEMU
 	select DM_SERIAL
 	select OF_CONTROL
 	select PL01X_SERIAL
+	imply CMD_DM
 
 config ARCH_RMOBILE
 	bool "Renesas ARM SoCs"
 	select BOARD_EARLY_INIT_F
 	select DM
 	select DM_SERIAL
+	imply CMD_DM
 	imply FAT_WRITE
 	imply SYS_THUMB_BUILD
 
@@ -756,6 +767,7 @@ config ARCH_SNAPDRAGON
 	select OF_SEPARATE
 	select SMEM
 	select SPMI
+	imply CMD_DM
 
 config ARCH_SOCFPGA
 	bool "Altera SOCFPGA family"
@@ -784,6 +796,7 @@ config ARCH_SOCFPGA
 	select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
 	select SYS_NS16550
 	select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
+	imply CMD_DM
 	imply CMD_MTDPARTS
 	imply CRC32_VERIFY
 	imply DM_SPI
@@ -816,6 +829,7 @@ config ARCH_SUNXI
 	select USB_KEYBOARD if DISTRO_DEFAULTS
 	select USB_STORAGE if DISTRO_DEFAULTS
 	select USE_TINY_PRINTF
+	imply CMD_DM
 	imply CMD_GPT
 	imply DISTRO_DEFAULTS
 	imply FAT_WRITE
@@ -861,6 +875,7 @@ config ARCH_ZYNQ
 	select SUPPORT_SPL
 	imply ARCH_EARLY_INIT_R
 	imply CMD_CLK
+	imply CMD_DM
 	imply CMD_SPL
 	imply FAT_WRITE
 
@@ -871,6 +886,7 @@ config ARCH_ZYNQMP_R5
 	select DM
 	select DM_SERIAL
 	select OF_CONTROL
+	imply CMD_DM
 
 config ARCH_ZYNQMP
 	bool "Xilinx ZynqMP based platform"
@@ -884,6 +900,7 @@ config ARCH_ZYNQMP
 	select SPL_BOARD_INIT if SPL
 	select SPL_CLK if SPL
 	select SUPPORT_SPL
+	imply CMD_DM
 	imply FAT_WRITE
 
 config TEGRA
@@ -1010,6 +1027,7 @@ config TARGET_HIKEY
 	select OF_CONTROL
 	select PL01X_SERIAL
 	select SPECIFY_CONSOLE_INDEX
+	imply CMD_DM
 	  help
 	  Support for HiKey 96boards platform. It features a HI6220
 	  SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
@@ -1022,6 +1040,7 @@ config TARGET_POPLAR
 	select DM_USB
 	select OF_CONTROL
 	select PL01X_SERIAL
+	imply CMD_DM
 	  help
 	  Support for Poplar 96boards EE platform. It features a HI3798cv200
 	  SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
@@ -1234,6 +1253,7 @@ config ARCH_UNIPHIER
 	select SPL_OF_CONTROL if SPL
 	select SPL_PINCTRL if SPL
 	select SUPPORT_SPL
+	imply CMD_DM
 	imply DISTRO_DEFAULTS
 	imply FAT_WRITE
 	help
@@ -1246,6 +1266,7 @@ config STM32
 	select DM
 	select DM_SERIAL
 	select SYS_THUMB_BUILD
+	imply CMD_DM
 
 config ARCH_STI
 	bool "Support STMicrolectronics SoCs"
@@ -1255,6 +1276,7 @@ config ARCH_STI
 	select DM_MMC
 	select DM_RESET
 	select DM_SERIAL
+	imply CMD_DM
 	help
 	  Support for STMicroelectronics STiH407/10 SoC family.
 	  This SoC is used on Linaro 96Board STiH410-B2260
@@ -1277,6 +1299,7 @@ config ARCH_STM32MP
 	select SYSCON
 	select SYSRESET
 	select SYS_THUMB_BUILD
+	imply CMD_DM
 	help
 	  Support for STM32MP SoC family developed by STMicroelectronics,
 	  MPUs based on ARM cortex A core
@@ -1304,6 +1327,7 @@ config ARCH_ROCKCHIP
 	select SYS_MALLOC_F
 	select SYS_THUMB_BUILD if !ARM64
 	imply ADC
+	imply CMD_DM
 	imply DISTRO_DEFAULTS
 	imply FAT_WRITE
 	imply SARADC_ROCKCHIP
@@ -1323,6 +1347,7 @@ config ARCH_ASPEED
 	bool "Support Aspeed SoCs"
 	select DM
 	select OF_CONTROL
+	imply CMD_DM
 
 endchoice