summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
authorSimon Glass <sjg@chromium.org>2016-09-13 07:05:23 -0600
committerTom Rini <trini@konsulko.com>2016-09-16 17:03:39 -0400
commit11bde1cd593892040c9d46cf9e8b738820d329db (patch)
treefa05b82741da1e76d146e5495bd18d0b9d2dbf6e /README
parent76f1f38816d8763b51e5f1d6ca099a88aa1fd077 (diff)
Kconfig: spl: Add SPL support options to Kconfig
There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'README')
-rw-r--r--README49
1 files changed, 0 insertions, 49 deletions
diff --git a/README b/README
index f41a6afc341..d916ee77f59 100644
--- a/README
+++ b/README
@@ -3509,21 +3509,6 @@ FIT uImage format:
CONFIG_SPL_INIT_MINIMAL
Arch init code should be built for a very small image
- CONFIG_SPL_LIBCOMMON_SUPPORT
- Support for common/libcommon.o in SPL binary
-
- CONFIG_SPL_LIBDISK_SUPPORT
- Support for disk/libdisk.o in SPL binary
-
- CONFIG_SPL_I2C_SUPPORT
- Support for drivers/i2c/libi2c.o in SPL binary
-
- CONFIG_SPL_GPIO_SUPPORT
- Support for drivers/gpio/libgpio.o in SPL binary
-
- CONFIG_SPL_MMC_SUPPORT
- Support for drivers/mmc/libmmc.o in SPL binary
-
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
Address and partition on the MMC to load U-Boot from
@@ -3547,12 +3532,6 @@ FIT uImage format:
Partition on the MMC to load U-Boot from when the MMC is being
used in fs mode
- CONFIG_SPL_FAT_SUPPORT
- Support for fs/fat/libfat.o in SPL binary
-
- CONFIG_SPL_EXT_SUPPORT
- Support for EXT filesystem in SPL binary
-
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
Filename to read to load U-Boot when reading from filesystem
@@ -3591,18 +3570,10 @@ FIT uImage format:
Support for a lightweight UBI (fastmap) scanner and
loader
- CONFIG_SPL_MTD_SUPPORT
- Support for the MTD subsystem within SPL. Useful for
- environment on NAND support within SPL.
-
CONFIG_SPL_NAND_RAW_ONLY
Support to boot only raw u-boot.bin images. Use this only
if you need to save space.
- CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
- Set for the SPL on PPC mpc8xxx targets, support for
- drivers/ddr/fsl/libddr.o in SPL binary.
-
CONFIG_SPL_COMMON_INIT_DDR
Set for common ddr init with serial presence detect in
SPL binary.
@@ -3638,29 +3609,9 @@ FIT uImage format:
Support for an OMAP3-specific set of functions to return the
ID and MFR of the first attached NAND chip, if present.
- CONFIG_SPL_SERIAL_SUPPORT
- Support for drivers/serial/libserial.o in SPL binary
-
- CONFIG_SPL_SPI_FLASH_SUPPORT
- Support for drivers/mtd/spi/libspi_flash.o in SPL binary
-
- CONFIG_SPL_SPI_SUPPORT
- Support for drivers/spi/libspi.o in SPL binary
-
CONFIG_SPL_RAM_DEVICE
Support for running image already present in ram, in SPL binary
- CONFIG_SPL_LIBGENERIC_SUPPORT
- Support for lib/libgeneric.o in SPL binary
-
- CONFIG_SPL_ENV_SUPPORT
- Support for the environment operating in SPL binary
-
- CONFIG_SPL_NET_SUPPORT
- Support for the net/libnet.o in SPL binary.
- It conflicts with SPL env from storage medium specified by
- CONFIG_ENV_IS_xxx but CONFIG_ENV_IS_NOWHERE
-
CONFIG_SPL_PAD_TO
Image offset to which the SPL should be padded before appending
the SPL payload. By default, this is defined as