summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
authorAlbert ARIBAUD <albert.u.boot@aribaud.net>2013-05-30 14:45:06 +0200
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2013-05-30 14:45:06 +0200
commita19b0dd62d7b8efc658fa1aa685ff5665878f3ee (patch)
tree1fadf0fb3da83203ba28f209ec99e1b33e03f4d5 /README
parent60985bba58e7695dac1fddae8cdbb62d8cfd1254 (diff)
parenta71d45d706a5b51c348160163b6c159632273fed (diff)
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts: common/cmd_fpga.c drivers/usb/host/ohci-at91.c
Diffstat (limited to 'README')
-rw-r--r--README10
1 files changed, 8 insertions, 2 deletions
diff --git a/README b/README
index b72ab2fb822..b1b3e1788ec 100644
--- a/README
+++ b/README
@@ -201,7 +201,6 @@ Directory Hierarchy:
/mpc5xx Files specific to Freescale MPC5xx CPUs
/mpc5xxx Files specific to Freescale MPC5xxx CPUs
/mpc8xx Files specific to Freescale MPC8xx CPUs
- /mpc8220 Files specific to Freescale MPC8220 CPUs
/mpc824x Files specific to Freescale MPC824x CPUs
/mpc8260 Files specific to Freescale MPC8260 CPUs
/mpc85xx Files specific to Freescale MPC85xx CPUs
@@ -899,6 +898,7 @@ The following options need to be configured:
CONFIG_CMD_SF * Read/write/erase SPI NOR flash
CONFIG_CMD_SHA1SUM print sha1 memory digest
(requires CONFIG_CMD_MEMORY)
+ CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x
CONFIG_CMD_SOURCE "source" command Support
CONFIG_CMD_SPI * SPI serial bus support
CONFIG_CMD_TFTPSRV * TFTP transfer in server mode
@@ -2997,6 +2997,12 @@ FIT uImage format:
use an arch-specific makefile fragment instead, for
example if more than one image needs to be produced.
+ CONFIG_FIT_SPL_PRINT
+ Printing information about a FIT image adds quite a bit of
+ code to SPL. So this is normally disabled in SPL. Use this
+ option to re-enable it. This will affect the output of the
+ bootm command when booting a FIT image.
+
Modem Support:
--------------
@@ -5062,7 +5068,7 @@ On some platforms, it's possible to boot Linux zImage. This is done
using the "bootz" command. The syntax of "bootz" command is the same
as the syntax of "bootm" command.
-Note, defining the CONFIG_SUPPORT_INITRD_RAW allows user to supply
+Note, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply
kernel with raw initrd images. The syntax is slightly different, the
address of the initrd must be augmented by it's size, in the following
format: "<initrd addres>:<initrd size>".