summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-02-23 23:54:43 +0000
committerwdenk <wdenk>2004-02-23 23:54:43 +0000
commit028ab6b598b628326116acd88e0f35aa9f526d12 (patch)
tree0d54315bd92d713a405004b6e36fca8d2b7c53e3 /README
parent63e73c9a8ed5b32d9c4067ffaad953e9a8fe8f0a (diff)
* Patch by Peter Ryser, 20 Feb 2004:
Add support for the Xilinx ML300 platform * Patch by Stephan Linz, 17 Feb 2004: Fix watchdog support for NIOS * Patch by Josh Fryman, 16 Feb 2004: Fix byte-swapping for cfi_flash.c for different bus widths * Patch by Jon Diekema, 14 Jeb 2004: Remove duplicate "FPGA Support" notes from the README file
Diffstat (limited to 'README')
-rw-r--r--README54
1 files changed, 0 insertions, 54 deletions
diff --git a/README b/README
index 3631f01c8d8..b5a287cbf73 100644
--- a/README
+++ b/README
@@ -1159,60 +1159,6 @@ The following options need to be configured:
CONFIG_FPGA
- Used to specify the types of FPGA devices. For
- example,
- #define CONFIG_FPGA CFG_XILINX_VIRTEX2
-
- CFG_FPGA_PROG_FEEDBACK
-
- Enable printing of hash marks during FPGA
- configuration.
-
- CFG_FPGA_CHECK_BUSY
-
- Enable checks on FPGA configuration interface busy
- status by the configuration function. This option
- will require a board or device specific function to
- be written.
-
- CONFIG_FPGA_DELAY
-
- If defined, a function that provides delays in the
- FPGA configuration driver.
-
- CFG_FPGA_CHECK_CTRLC
-
- Allow Control-C to interrupt FPGA configuration
-
- CFG_FPGA_CHECK_ERROR
-
- Check for configuration errors during FPGA bitfile
- loading. For example, abort during Virtex II
- configuration if the INIT_B line goes low (which
- indicated a CRC error).
-
- CFG_FPGA_WAIT_INIT
-
- Maximum time to wait for the INIT_B line to deassert
- after PROB_B has been deasserted during a Virtex II
- FPGA configuration sequence. The default time is 500 mS.
-
- CFG_FPGA_WAIT_BUSY
-
- Maximum time to wait for BUSY to deassert during
- Virtex II FPGA configuration. The default is 5 mS.
-
- CFG_FPGA_WAIT_CONFIG
-
- Time to wait after FPGA configuration. The default is
- 200 mS.
-
-- FPGA Support: CONFIG_FPGA_COUNT
-
- Specify the number of FPGA devices to support.
-
- CONFIG_FPGA
-
Used to specify the types of FPGA devices. For example,
#define CONFIG_FPGA CFG_XILINX_VIRTEX2