summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2007-08-15 14:51:27 +0200
committerStefan Roese <sr@denx.de>2007-08-15 14:51:27 +0200
commitd61ea14885631e58a25feaa81ee82eb464c62d6a (patch)
tree27927975039d0a15e6c6d4dfe8f765a76a12820a /README
parent3ba4c2d68f6541db4677b4aea12071f56e6ff6e6 (diff)
parent594e79838ce5078a90d0c27abb2b2d61d5f8e8a7 (diff)
Merge with git://www.denx.de/git/u-boot.git
Diffstat (limited to 'README')
-rw-r--r--README430
1 files changed, 188 insertions, 242 deletions
diff --git a/README b/README
index 2a0dafaf67a..4f2acb40d1f 100644
--- a/README
+++ b/README
@@ -229,117 +229,9 @@ build a config tool - later.
The following options need to be configured:
-- CPU Type: Define exactly one of
-
- PowerPC based CPUs:
- -------------------
- CONFIG_MPC823, CONFIG_MPC850, CONFIG_MPC855, CONFIG_MPC860
- or CONFIG_MPC5xx
- or CONFIG_MPC8220
- or CONFIG_MPC824X, CONFIG_MPC8260
- or CONFIG_MPC85xx
- or CONFIG_IOP480
- or CONFIG_405GP
- or CONFIG_405EP
- or CONFIG_440
- or CONFIG_MPC74xx
- or CONFIG_750FX
-
- ARM based CPUs:
- ---------------
- CONFIG_SA1110
- CONFIG_ARM7
- CONFIG_PXA250
- CONFIG_CPU_MONAHANS
-
- ColdFire based CPUs:
- --------------------
- CONFIG_M5329
-
- MicroBlaze based CPUs:
- ----------------------
- CONFIG_MICROBLAZE
-
- Nios-2 based CPUs:
- ----------------------
- CONFIG_NIOS2
-
- AVR32 based CPUs:
- ----------------------
- CONFIG_AT32AP
-
-- Board Type: Define exactly one of
-
- PowerPC based boards:
- ---------------------
-
- CONFIG_ADCIOP CONFIG_FPS860L CONFIG_OXC
- CONFIG_ADS860 CONFIG_GEN860T CONFIG_PCI405
- CONFIG_AMX860 CONFIG_GENIETV CONFIG_PCIPPC2
- CONFIG_AP1000 CONFIG_GTH CONFIG_PCIPPC6
- CONFIG_AR405 CONFIG_gw8260 CONFIG_pcu_e
- CONFIG_BAB7xx CONFIG_hermes CONFIG_PIP405
- CONFIG_BC3450 CONFIG_hymod CONFIG_PM826
- CONFIG_c2mon CONFIG_IAD210 CONFIG_ppmc8260
- CONFIG_CANBT CONFIG_ICU862 CONFIG_QS823
- CONFIG_CCM CONFIG_IP860 CONFIG_QS850
- CONFIG_CMI CONFIG_IPHASE4539 CONFIG_QS860T
- CONFIG_cogent_mpc8260 CONFIG_IVML24 CONFIG_RBC823
- CONFIG_cogent_mpc8xx CONFIG_IVML24_128 CONFIG_RPXClassic
- CONFIG_CPCI405 CONFIG_IVML24_256 CONFIG_RPXlite
- CONFIG_CPCI4052 CONFIG_IVMS8 CONFIG_RPXsuper
- CONFIG_CPCIISER4 CONFIG_IVMS8_128 CONFIG_rsdproto
- CONFIG_CPU86 CONFIG_IVMS8_256 CONFIG_sacsng
- CONFIG_CRAYL1 CONFIG_JSE CONFIG_Sandpoint8240
- CONFIG_CSB272 CONFIG_LANTEC CONFIG_Sandpoint8245
- CONFIG_CU824 CONFIG_LITE5200B CONFIG_sbc8260
- CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8560
- CONFIG_DB64360 CONFIG_MBX CONFIG_SM850
- CONFIG_DB64460 CONFIG_MBX860T CONFIG_SPD823TS
- CONFIG_DU405 CONFIG_MHPC CONFIG_STXGP3
- CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_SXNI855T
- CONFIG_EBONY CONFIG_MOUSSE CONFIG_TQM823L
- CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM8260
- CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM850L
- CONFIG_ep8260 CONFIG_MPC8540EVAL CONFIG_TQM855L
- CONFIG_ERIC CONFIG_MPC8560ADS CONFIG_TQM860L
- CONFIG_ESTEEM192E CONFIG_MUSENKI CONFIG_TTTech
- CONFIG_ETX094 CONFIG_MVS1 CONFIG_UTX8245
- CONFIG_EVB64260 CONFIG_NETPHONE CONFIG_V37
- CONFIG_FADS823 CONFIG_NETTA CONFIG_W7OLMC
- CONFIG_FADS850SAR CONFIG_NETVIA CONFIG_W7OLMG
- CONFIG_FADS860T CONFIG_NX823 CONFIG_WALNUT
- CONFIG_FLAGADM CONFIG_OCRTC CONFIG_ZPC1900
- CONFIG_FPS850L CONFIG_ORSG CONFIG_ZUMA
-
- ARM based boards:
- -----------------
-
- CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250,
- CONFIG_CSB637, CONFIG_DELTA, CONFIG_DNP1110,
- CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
- CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
- CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400,
- CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4,
- CONFIG_PLEB2, CONFIG_SHANNON, CONFIG_P2_OMAP730,
- CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB,
- CONFIG_VCMA9
-
- MicroBlaze based boards:
- ------------------------
-
- CONFIG_SUZAKU
-
- Nios-2 based boards:
- ------------------------
-
- CONFIG_PCI5441 CONFIG_PK1C20
- CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40
-
- AVR32 based boards:
- -------------------
-
- CONFIG_ATSTK1000
+- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX.
+
+- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS.
- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
Define exactly one of
@@ -546,7 +438,7 @@ The following options need to be configured:
CFG_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c)
CONFIG_CONSOLE_TIME display time/date info in
upper right corner
- (requires CFG_CMD_DATE)
+ (requires CONFIG_CMD_DATE)
CONFIG_VIDEO_LOGO display Linux logo in
upper left corner
CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of
@@ -650,103 +542,96 @@ The following options need to be configured:
time on others. This setting #define's the initial
value of the "loads_echo" environment variable.
-- Kgdb Serial Baudrate: (if CFG_CMD_KGDB is defined)
+- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined)
CONFIG_KGDB_BAUDRATE
Select one of the baudrates listed in
CFG_BAUDRATE_TABLE, see below.
- Monitor Functions:
- CONFIG_COMMANDS
- Most monitor functions can be selected (or
- de-selected) by adjusting the definition of
- CONFIG_COMMANDS; to select individual functions,
- #define CONFIG_COMMANDS by "OR"ing any of the
- following values:
-
- #define enables commands:
- -------------------------
- CFG_CMD_ASKENV * ask for env variable
- CFG_CMD_AUTOSCRIPT Autoscript Support
- CFG_CMD_BDI bdinfo
- CFG_CMD_BEDBUG * Include BedBug Debugger
- CFG_CMD_BMP * BMP support
- CFG_CMD_BSP * Board specific commands
- CFG_CMD_BOOTD bootd
- CFG_CMD_CACHE * icache, dcache
- CFG_CMD_CONSOLE coninfo
- CFG_CMD_DATE * support for RTC, date/time...
- CFG_CMD_DHCP * DHCP support
- CFG_CMD_DIAG * Diagnostics
- CFG_CMD_DOC * Disk-On-Chip Support
- CFG_CMD_DTT * Digital Therm and Thermostat
- CFG_CMD_ECHO echo arguments
- CFG_CMD_EEPROM * EEPROM read/write support
- CFG_CMD_ELF * bootelf, bootvx
- CFG_CMD_ENV saveenv
- CFG_CMD_FDC * Floppy Disk Support
- CFG_CMD_FAT * FAT partition support
- CFG_CMD_FDOS * Dos diskette Support
- CFG_CMD_FLASH flinfo, erase, protect
- CFG_CMD_FPGA FPGA device initialization support
- CFG_CMD_HWFLOW * RTS/CTS hw flow control
- CFG_CMD_I2C * I2C serial bus support
- CFG_CMD_IDE * IDE harddisk support
- CFG_CMD_IMI iminfo
- CFG_CMD_IMLS List all found images
- CFG_CMD_IMMAP * IMMR dump support
- CFG_CMD_IRQ * irqinfo
- CFG_CMD_ITEST Integer/string test of 2 values
- CFG_CMD_JFFS2 * JFFS2 Support
- CFG_CMD_KGDB * kgdb
- CFG_CMD_LOADB loadb
- CFG_CMD_LOADS loads
- CFG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base,
- loop, loopw, mtest
- CFG_CMD_MISC Misc functions like sleep etc
- CFG_CMD_MMC * MMC memory mapped support
- CFG_CMD_MII * MII utility commands
- CFG_CMD_NAND * NAND support
- CFG_CMD_NET bootp, tftpboot, rarpboot
- CFG_CMD_PCI * pciinfo
- CFG_CMD_PCMCIA * PCMCIA support
- CFG_CMD_PING * send ICMP ECHO_REQUEST to network host
- CFG_CMD_PORTIO * Port I/O
- CFG_CMD_REGINFO * Register dump
- CFG_CMD_RUN run command in env variable
- CFG_CMD_SAVES * save S record dump
- CFG_CMD_SCSI * SCSI Support
- CFG_CMD_SDRAM * print SDRAM configuration information
- (requires CFG_CMD_I2C)
- CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
- CFG_CMD_SPI * SPI serial bus support
- CFG_CMD_USB * USB support
- CFG_CMD_VFD * VFD support (TRAB)
- CFG_CMD_BSP * Board SPecific functions
- CFG_CMD_CDP * Cisco Discover Protocol support
- CFG_CMD_FSL * Microblaze FSL support
- -----------------------------------------------
- CFG_CMD_ALL all
-
- CONFIG_CMD_DFL Default configuration; at the moment
- this is includes all commands, except
- the ones marked with "*" in the list
- above.
-
- If you don't define CONFIG_COMMANDS it defaults to
- CONFIG_CMD_DFL in include/cmd_confdefs.h. A board can
- override the default settings in the respective
- include file.
+ Monitor commands can be included or excluded
+ from the build by using the #include files
+ "config_cmd_all.h" and #undef'ing unwanted
+ commands, or using "config_cmd_default.h"
+ and augmenting with additional #define's
+ for wanted commands.
+
+ The default command configuration includes all commands
+ except those marked below with a "*".
+
+ CONFIG_CMD_ASKENV * ask for env variable
+ CONFIG_CMD_AUTOSCRIPT Autoscript Support
+ CONFIG_CMD_BDI bdinfo
+ CONFIG_CMD_BEDBUG * Include BedBug Debugger
+ CONFIG_CMD_BMP * BMP support
+ CONFIG_CMD_BSP * Board specific commands
+ CONFIG_CMD_BOOTD bootd
+ CONFIG_CMD_CACHE * icache, dcache
+ CONFIG_CMD_CONSOLE coninfo
+ CONFIG_CMD_DATE * support for RTC, date/time...
+ CONFIG_CMD_DHCP * DHCP support
+ CONFIG_CMD_DIAG * Diagnostics
+ CONFIG_CMD_DOC * Disk-On-Chip Support
+ CONFIG_CMD_DTT * Digital Therm and Thermostat
+ CONFIG_CMD_ECHO echo arguments
+ CONFIG_CMD_EEPROM * EEPROM read/write support
+ CONFIG_CMD_ELF * bootelf, bootvx
+ CONFIG_CMD_ENV saveenv
+ CONFIG_CMD_FDC * Floppy Disk Support
+ CONFIG_CMD_FAT * FAT partition support
+ CONFIG_CMD_FDOS * Dos diskette Support
+ CONFIG_CMD_FLASH flinfo, erase, protect
+ CONFIG_CMD_FPGA FPGA device initialization support
+ CONFIG_CMD_HWFLOW * RTS/CTS hw flow control
+ CONFIG_CMD_I2C * I2C serial bus support
+ CONFIG_CMD_IDE * IDE harddisk support
+ CONFIG_CMD_IMI iminfo
+ CONFIG_CMD_IMLS List all found images
+ CONFIG_CMD_IMMAP * IMMR dump support
+ CONFIG_CMD_IRQ * irqinfo
+ CONFIG_CMD_ITEST Integer/string test of 2 values
+ CONFIG_CMD_JFFS2 * JFFS2 Support
+ CONFIG_CMD_KGDB * kgdb
+ CONFIG_CMD_LOADB loadb
+ CONFIG_CMD_LOADS loads
+ CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base,
+ loop, loopw, mtest
+ CONFIG_CMD_MISC Misc functions like sleep etc
+ CONFIG_CMD_MMC * MMC memory mapped support
+ CONFIG_CMD_MII * MII utility commands
+ CONFIG_CMD_NAND * NAND support
+ CONFIG_CMD_NET bootp, tftpboot, rarpboot
+ CONFIG_CMD_PCI * pciinfo
+ CONFIG_CMD_PCMCIA * PCMCIA support
+ CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network
+ host
+ CONFIG_CMD_PORTIO * Port I/O
+ CONFIG_CMD_REGINFO * Register dump
+ CONFIG_CMD_RUN run command in env variable
+ CONFIG_CMD_SAVES * save S record dump
+ CONFIG_CMD_SCSI * SCSI Support
+ CONFIG_CMD_SDRAM * print SDRAM configuration information
+ (requires CONFIG_CMD_I2C)
+ CONFIG_CMD_SETGETDCR Support for DCR Register access
+ (4xx only)
+ CONFIG_CMD_SPI * SPI serial bus support
+ CONFIG_CMD_USB * USB support
+ CONFIG_CMD_VFD * VFD support (TRAB)
+ CONFIG_CMD_BSP * Board SPecific functions
+ CONFIG_CMD_CDP * Cisco Discover Protocol support
+ CONFIG_CMD_FSL * Microblaze FSL support
+
EXAMPLE: If you want all functions except of network
support you can write:
- #define CONFIG_COMMANDS (CFG_CMD_ALL & ~CFG_CMD_NET)
+ #include "config_cmd_all.h"
+ #undef CONFIG_CMD_NET
Other Commands:
fdt (flattened device tree) command: CONFIG_OF_LIBFDT
Note: Don't enable the "icache" and "dcache" commands
- (configuration option CFG_CMD_CACHE) unless you know
+ (configuration option CONFIG_CMD_CACHE) unless you know
what you (and your U-Boot users) are doing. Data
cache cannot be enabled on systems like the 8xx or
8260 (where accesses to the IMMR region must be
@@ -774,7 +659,7 @@ The following options need to be configured:
- Real-Time Clock:
- When CFG_CMD_DATE is selected, the type of the RTC
+ When CONFIG_CMD_DATE is selected, the type of the RTC
has to be selected, too. Define exactly one of the
following options:
@@ -795,14 +680,14 @@ The following options need to be configured:
When CONFIG_TIMESTAMP is selected, the timestamp
(date and time) of an image is printed by image
commands like bootm or iminfo. This option is
- automatically enabled when you select CFG_CMD_DATE .
+ automatically enabled when you select CONFIG_CMD_DATE .
- Partition Support:
CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION
and/or CONFIG_ISO_PARTITION
- If IDE or SCSI support is enabled (CFG_CMD_IDE or
- CFG_CMD_SCSI) you must configure support for at least
+ If IDE or SCSI support is enabled (CONFIG_CMD_IDE or
+ CONFIG_CMD_SCSI) you must configure support for at least
one partition type as well.
- IDE Reset method:
@@ -905,6 +790,71 @@ The following options need to be configured:
CONFIG_USB_CONFIG
for differential drivers: 0x00001000
for single ended drivers: 0x00005000
+ CFG_USB_EVENT_POLL
+ May be defined to allow interrupt polling
+ instead of using asynchronous interrupts
+
+- USB Device:
+ Define the below if you wish to use the USB console.
+ Once firmware is rebuilt from a serial console issue the
+ command "setenv stdin usbtty; setenv stdout usbtty" and
+ attach your usb cable. The Unix command "dmesg" should print
+ it has found a new device. The environment variable usbtty
+ can be set to gserial or cdc_acm to enable your device to
+ appear to a USB host as a Linux gserial device or a
+ Common Device Class Abstract Control Model serial device.
+ If you select usbtty = gserial you should be able to enumerate
+ a Linux host by
+ # modprobe usbserial vendor=0xVendorID product=0xProductID
+ else if using cdc_acm, simply setting the environment
+ variable usbtty to be cdc_acm should suffice. The following
+ might be defined in YourBoardName.h
+
+ CONFIG_USB_DEVICE
+ Define this to build a UDC device
+
+ CONFIG_USB_TTY
+ Define this to have a tty type of device available to
+ talk to the UDC device
+
+ CFG_CONSOLE_IS_IN_ENV
+ Define this if you want stdin, stdout &/or stderr to
+ be set to usbtty.
+
+ mpc8xx:
+ CFG_USB_EXTC_CLK 0xBLAH
+ Derive USB clock from external clock "blah"
+ - CFG_USB_EXTC_CLK 0x02
+
+ CFG_USB_BRG_CLK 0xBLAH
+ Derive USB clock from brgclk
+ - CFG_USB_BRG_CLK 0x04
+
+ If you have a USB-IF assigned VendorID then you may wish to
+ define your own vendor specific values either in BoardName.h
+ or directly in usbd_vendor_info.h. If you don't define
+ CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME,
+ CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot
+ should pretend to be a Linux device to it's target host.
+
+ CONFIG_USBD_MANUFACTURER
+ Define this string as the name of your company for
+ - CONFIG_USBD_MANUFACTURER "my company"
+
+ CONFIG_USBD_PRODUCT_NAME
+ Define this string as the name of your product
+ - CONFIG_USBD_PRODUCT_NAME "acme usb device"
+
+ CONFIG_USBD_VENDORID
+ Define this as your assigned Vendor ID from the USB
+ Implementors Forum. This *must* be a genuine Vendor ID
+ to avoid polluting the USB namespace.
+ - CONFIG_USBD_VENDORID 0xFFFF
+
+ CONFIG_USBD_PRODUCTID
+ Define this as the unique Product ID
+ for your device
+ - CONFIG_USBD_PRODUCTID 0xFFFF
- MMC Support:
@@ -912,8 +862,8 @@ The following options need to be configured:
enable this define CONFIG_MMC. The MMC can be
accessed from the boot prompt by mapping the device
to physical memory similar to flash. Command line is
- enabled with CFG_CMD_MMC. The MMC driver also works with
- the FAT fs. This is enabled with CFG_CMD_FAT.
+ enabled with CONFIG_CMD_MMC. The MMC driver also works with
+ the FAT fs. This is enabled with CONFIG_CMD_FAT.
- Journaling Flash filesystem support:
CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
@@ -1117,6 +1067,16 @@ The following options need to be configured:
Defines a default value for theIP address of a TFTP
server to contact when using the "tftboot" command.
+- Multicast TFTP Mode:
+ CONFIG_MCAST_TFTP
+
+ Defines whether you want to support multicast TFTP as per
+ rfc-2090; for example to work with atftp. Lets lots of targets
+ tftp down the same boot image concurrently. Note: the ethernet
+ driver in use must provide a function: mcast() to join/leave a
+ multicast group.
+
+ CONFIG_BOOTP_RANDOM_DELAY
- BOOTP Recovery Mode:
CONFIG_BOOTP_RANDOM_DELAY
@@ -1128,7 +1088,7 @@ The following options need to be configured:
boot, thus flooding the BOOTP server. Defining
CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be
inserted before sending out BOOTP requests. The
- following delays are insterted then:
+ following delays are inserted then:
1st BOOTP request: delay 0 ... 1 sec
2nd BOOTP request: delay 0 ... 2 sec
@@ -1137,10 +1097,24 @@ The following options need to be configured:
BOOTP requests: delay 0 ... 8 sec
- DHCP Advanced Options:
- CONFIG_BOOTP_MASK
-
- You can fine tune the DHCP functionality by adding
- these flags to the CONFIG_BOOTP_MASK define:
+ You can fine tune the DHCP functionality by defining
+ CONFIG_BOOTP_* symbols:
+
+ CONFIG_BOOTP_SUBNETMASK
+ CONFIG_BOOTP_GATEWAY
+ CONFIG_BOOTP_HOSTNAME
+ CONFIG_BOOTP_NISDOMAIN
+ CONFIG_BOOTP_BOOTPATH
+ CONFIG_BOOTP_BOOTFILESIZE
+ CONFIG_BOOTP_DNS
+ CONFIG_BOOTP_DNS2
+ CONFIG_BOOTP_SEND_HOSTNAME
+ CONFIG_BOOTP_NTPSERVER
+ CONFIG_BOOTP_TIMEOFFSET
+ CONFIG_BOOTP_VENDOREX
+
+ CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip
+ environment variable, not the BOOTP server.
CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS
serverip from a DHCP server, it is possible that more
@@ -1149,15 +1123,14 @@ The following options need to be configured:
serverip will be stored in the additional environment
variable "dnsip2". The first DNS serverip is always
stored in the variable "dnsip", when CONFIG_BOOTP_DNS
- is added to the CONFIG_BOOTP_MASK.
+ is defined.
CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable
to do a dynamic update of a DNS server. To do this, they
need the hostname of the DHCP requester.
- If CONFIG_BOOP_SEND_HOSTNAME is added to the
- CONFIG_BOOTP_MASK, the content of the "hostname"
- environment variable is passed as option 12 to
- the DHCP server.
+ If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content
+ of the "hostname" environment variable is passed as
+ option 12 to the DHCP server.
- CDP Options:
CONFIG_CDP_DEVICE_ID
@@ -1225,7 +1198,7 @@ The following options need to be configured:
include the appropriate I2C driver for the selected cpu.
This will allow you to use i2c commands at the u-boot
- command line (as long as you set CFG_CMD_I2C in
+ command line (as long as you set CONFIG_CMD_I2C in
CONFIG_COMMANDS) and communicate with i2c based realtime
clock chips. See common/cmd_i2c.c for a description of the
command line interface.
@@ -2374,7 +2347,7 @@ Low Level (hardware related) configuration options:
- CONFIG_LOOPW
Add the "loopw" memory command. This only takes effect if
- the memory commands are activated globally (CFG_CMD_MEM).
+ the memory commands are activated globally (CONFIG_CMD_MEM).
- CONFIG_MX_CYCLIC
Add the "mdc" and "mwc" memory commands. These are cyclic
@@ -2388,7 +2361,7 @@ Low Level (hardware related) configuration options:
This command will write 12345678 to address 100 all 10 ms.
This only takes effect if the memory commands are activated
- globally (CFG_CMD_MEM).
+ globally (CONFIG_CMD_MEM).
- CONFIG_SKIP_LOWLEVEL_INIT
- CONFIG_SKIP_RELOCATE_UBOOT
@@ -2428,34 +2401,7 @@ is done by typing:
make NAME_config
where "NAME_config" is the name of one of the existing
-configurations; the following names are supported:
-
- ADCIOP_config FPS860L_config omap730p2_config
- ADS860_config GEN860T_config pcu_e_config
- Alaska8220_config
- AR405_config GENIETV_config PIP405_config
- at91rm9200dk_config GTH_config QS823_config
- CANBT_config hermes_config QS850_config
- cmi_mpc5xx_config hymod_config QS860T_config
- cogent_common_config IP860_config RPXlite_config
- cogent_mpc8260_config IVML24_config RPXlite_DW_config
- cogent_mpc8xx_config IVMS8_config RPXsuper_config
- CPCI405_config JSE_config rsdproto_config
- CPCIISER4_config LANTEC_config Sandpoint8240_config
- csb272_config lwmon_config sbc8260_config
- CU824_config MBX860T_config sbc8560_33_config
- DUET_ADS_config MBX_config sbc8560_66_config
- EBONY_config mpc7448hpc2_config SM850_config
- ELPT860_config MPC8260ADS_config SPD823TS_config
- ESTEEM192E_config MPC8540ADS_config stxgp3_config
- ETX094_config MPC8540EVAL_config SXNI855T_config
- FADS823_config NMPC8560ADS_config TQM823L_config
- FADS850SAR_config NETVIA_config TQM850L_config
- FADS860T_config omap1510inn_config TQM855L_config
- FPS850L_config omap1610h2_config TQM860L_config
- omap1610inn_config walnut_config
- omap5912osk_config Yukon8220_config
- omap2420h4_config ZPC1900_config
+configurations; see the main Makefile for supported names.
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for