diff options
author | Breno Lima <breno.lima@nxp.com> | 2018-07-20 21:48:10 -0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2018-07-24 09:25:23 -0400 |
commit | ad7061ed742e1312289644268859a0f4b512aaee (patch) | |
tree | ff7d8bfd460f81d0ccf3d0a83661106e72c473d1 /Documentation/devicetree | |
parent | 4a8b6e0101f8a5dd2c4629a872d4287c70dbe5e2 (diff) |
doc: Move device tree bindings documentation to doc/device-tree-bindings
Currently the U-Boot project contains 2 documentation directories:
- doc/
- Documentation/
The Documentation directory only contains device tree bindings related
content, so move the 3 files to doc/device-tree-bindings/.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Diffstat (limited to 'Documentation/devicetree')
3 files changed, 0 insertions, 111 deletions
diff --git a/Documentation/devicetree/bindings/phy/no-op.txt b/Documentation/devicetree/bindings/phy/no-op.txt deleted file mode 100644 index a3381122e68..00000000000 --- a/Documentation/devicetree/bindings/phy/no-op.txt +++ /dev/null @@ -1,16 +0,0 @@ -NOP PHY driver - -This driver is used to stub PHY operations in a driver (USB, SATA). -This is useful when the 'client' driver (USB, SATA, ...) uses the PHY framework -and there is no actual PHY harwdare to drive. - -Required properties: -- compatible : must contain "nop-phy" -- #phy-cells : must contain <0> - -Example: - -nop_phy { - compatible = "nop-phy"; - #phy-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt deleted file mode 100644 index 725ae71ae65..00000000000 --- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt +++ /dev/null @@ -1,73 +0,0 @@ -STMicroelectronics STM32 USB HS PHY controller - -The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI -switch. It controls PHY configuration and status, and the UTMI+ switch that -selects either OTG or HOST controller for the second PHY port. It also sets -PLL configuration. - -USBPHYC - |_ PLL - | - |_ PHY port#1 _________________ HOST controller - | _ | - | / 1|________________| - |_ PHY port#2 ----| |________________ - | \_0| | - |_ UTMI switch_______| OTG controller - - -Phy provider node -================= - -Required properties: -- compatible: must be "st,stm32mp1-usbphyc" -- reg: address and length of the usb phy control register set -- clocks: phandle + clock specifier for the PLL phy clock -- #address-cells: number of address cells for phys sub-nodes, must be <1> -- #size-cells: number of size cells for phys sub-nodes, must be <0> - -Optional properties: -- assigned-clocks: phandle + clock specifier for the PLL phy clock -- assigned-clock-parents: the PLL phy clock parent -- resets: phandle + reset specifier - -Required nodes: one sub-node per port the controller provides. - -Phy sub-nodes -============== - -Required properties: -- reg: phy port index -- phy-supply: phandle to the regulator providing 3V3 power to the PHY, - see phy-bindings.txt in the same directory. -- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY -- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY -- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY - port#1 and must be <1> for PHY port#2, to select USB controller - - -Example: - usbphyc: usb-phy@5a006000 { - compatible = "st,stm32mp1-usbphyc"; - reg = <0x5a006000 0x1000>; - clocks = <&rcc_clk USBPHY_K>; - resets = <&rcc_rst USBPHY_R>; - #address-cells = <1>; - #size-cells = <0>; - - usbphyc_port0: usb-phy@0 { - reg = <0>; - phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18> - #phy-cells = <0>; - }; - - usbphyc_port1: usb-phy@1 { - reg = <1>; - phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18> - #phy-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt deleted file mode 100644 index 1d990bcc0ba..00000000000 --- a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt +++ /dev/null @@ -1,22 +0,0 @@ -Broadcom STB wake-up Timer - -The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the -ability to wake up the system from low-power suspend/standby modes. - -Required properties: -- compatible : should contain "brcm,brcmstb-waketimer" -- reg : the register start and length for the WKTMR block -- interrupts : The TIMER interrupt -- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2 - interrupt controller node -- clocks : The phandle to the UPG fixed clock (27Mhz domain) - -Example: - -waketimer@f0411580 { - compatible = "brcm,brcmstb-waketimer"; - reg = <0xf0411580 0x14>; - interrupts = <0x3>; - interrupt-parent = <&aon_pm_l2_intc>; - clocks = <&upg_fixed>; -}; |