diff options
| author | Chen-Yu Tsai <wens@csie.org> | 2019-05-03 10:27:41 +0800 |
|---|---|---|
| committer | Jagan Teki <jagan@amarulasolutions.com> | 2019-05-09 00:44:14 +0530 |
| commit | c23b33f5311abe32db96884318996d2b41db4c94 (patch) | |
| tree | 058d3942f4fcbb2885dedd606033b9e6dd3214a3 | |
| parent | b39eab2ffd55690ee2cd6e82bb30904b6faf45e5 (diff) | |
sunxi: Enable EMAC on the Bananapi M3
The Bananapi M3 has an RTL8211E PHY connected to the EMAC using
RGMII. The PHY is powered by DCDC1 through SW @ 3.3V.
The board is designed to use 3.3V with RGMII, instead of the standard
reduced voltage of 2.5V we see everywhere. DLDO3, which provides the
I/O voltages, is raised to match.
This patch enables the EMAC and Realtek PHY drivers in the defconfig.
The device tree file already has the EMAC enabled.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
| -rw-r--r-- | configs/Sinovoip_BPI_M3_defconfig | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig index 79743a9c9a..b9ab00cb8a 100644 --- a/configs/Sinovoip_BPI_M3_defconfig +++ b/configs/Sinovoip_BPI_M3_defconfig @@ -21,8 +21,10 @@ CONFIG_CONSOLE_MUX=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3" +CONFIG_PHY_REALTEK=y +CONFIG_SUN8I_EMAC=y CONFIG_AXP_DCDC5_VOLT=1200 -CONFIG_AXP_DLDO3_VOLT=2500 +CONFIG_AXP_DLDO3_VOLT=3300 CONFIG_AXP_SW_ON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y |