video: Drop CONFIG_LCD_INFO

This option is not used anymore since the LCD implementation is being
removed. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>

10 files changed, 0 insertions, 178 deletions

diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 8a7a960c26..e5fdf38399 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -194,34 +194,6 @@ static void at91sam9261ek_lcd_hw_init(void)
 #endif
 }
 
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
-	ulong dram_size, nand_size;
-	int i;
-	char temp[32];
-
-	lcd_printf ("%s\n", U_BOOT_VERSION);
-	lcd_printf ("(C) 2008 ATMEL Corp\n");
-	lcd_printf ("at91support@atmel.com\n");
-	lcd_printf ("%s CPU at %s MHz\n",
-		ATMEL_CPU_NAME,
-		strmhz(temp, get_cpu_clk_rate()));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-	nand_size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += get_nand_dev_by_index(i)->size;
-	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
-		dram_size >> 20,
-		nand_size >> 20 );
-}
-#endif /* CONFIG_LCD_INFO */
 #endif
 
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 86b4050c4c..7c15a76587 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -134,51 +134,6 @@ static void at91sam9263ek_lcd_hw_init(void)
 	gd->fb_base = ATMEL_BASE_SRAM0;
 }
 
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-#ifdef CONFIG_MTD_NOR_FLASH
-#include <flash.h>
-#endif
-
-void lcd_show_board_info(void)
-{
-	ulong dram_size, nand_size;
-#ifdef CONFIG_MTD_NOR_FLASH
-	ulong flash_size;
-#endif
-	int i;
-	char temp[32];
-
-	lcd_printf ("%s\n", U_BOOT_VERSION);
-	lcd_printf ("(C) 2008 ATMEL Corp\n");
-	lcd_printf ("at91support@atmel.com\n");
-	lcd_printf ("%s CPU at %s MHz\n",
-		ATMEL_CPU_NAME,
-		strmhz(temp, get_cpu_clk_rate()));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-	nand_size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += get_nand_dev_by_index(i)->size;
-#ifdef CONFIG_MTD_NOR_FLASH
-	flash_size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
-		flash_size += flash_info[i].size;
-#endif
-	lcd_printf ("  %ld MB SDRAM, %ld MB NAND",
-		dram_size >> 20,
-		nand_size >> 20 );
-#ifdef CONFIG_MTD_NOR_FLASH
-	lcd_printf (",\n  %ld MB NOR",
-		flash_size >> 20);
-#endif
-	lcd_puts ("\n");
-}
-#endif /* CONFIG_LCD_INFO */
 #endif
 
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index 347197a606..3ab9fb321a 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -218,34 +218,6 @@ static void at91sam9m10g45ek_lcd_hw_init(void)
 	gd->fb_base = 0x73E00000;
 }
 
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
-	ulong dram_size, nand_size;
-	int i;
-	char temp[32];
-
-	lcd_printf ("%s\n", U_BOOT_VERSION);
-	lcd_printf ("(C) 2008 ATMEL Corp\n");
-	lcd_printf ("at91support@atmel.com\n");
-	lcd_printf ("%s CPU at %s MHz\n",
-		ATMEL_CPU_NAME,
-		strmhz(temp, get_cpu_clk_rate()));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-	nand_size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += get_nand_dev_by_index(i)->size;
-	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
-		dram_size >> 20,
-		nand_size >> 20 );
-}
-#endif /* CONFIG_LCD_INFO */
 #endif
 
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
index a337db4efc..5825ef8587 100644
--- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c
+++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
@@ -21,11 +21,6 @@
 #include <atmel_hlcdc.h>
 #include <netdev.h>
 
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 
 /* ------------------------------------------------------------------------- */
@@ -108,31 +103,6 @@ void lcd_disable(void)
 	at91_set_pio_output(AT91_PIO_PORTC, 25, 1);	/* power down */
 }
 
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
-	ulong dram_size, nand_size;
-	int i;
-	char temp[32];
-
-	lcd_printf("%s\n", U_BOOT_VERSION);
-	lcd_printf("ATMEL Corp\n");
-	lcd_printf("at91@atmel.com\n");
-	lcd_printf("%s CPU at %s MHz\n",
-		ATMEL_CPU_NAME,
-		strmhz(temp, get_cpu_clk_rate()));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-	nand_size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += get_nand_dev_by_index(i)->size;
-	lcd_printf("  %ld MB SDRAM, %ld MB NAND\n",
-		dram_size >> 20,
-		nand_size >> 20);
-}
-#endif /* CONFIG_LCD_INFO */
 #endif /* CONFIG_LCD */
 
 #ifdef CONFIG_USB_ATMEL
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index af59620d0c..45dfaa5f3e 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -129,34 +129,6 @@ static void at91sam9rlek_lcd_hw_init(void)
 	at91_periph_clk_enable(ATMEL_ID_LCDC);
 }
 
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
-	ulong dram_size, nand_size;
-	int i;
-	char temp[32];
-
-	lcd_printf ("%s\n", U_BOOT_VERSION);
-	lcd_printf ("(C) 2008 ATMEL Corp\n");
-	lcd_printf ("at91support@atmel.com\n");
-	lcd_printf ("%s CPU at %s MHz\n",
-		ATMEL_CPU_NAME,
-		strmhz(temp, get_cpu_clk_rate()));
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-	nand_size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += get_nand_dev_by_index(i)->size;
-	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
-		dram_size >> 20,
-		nand_size >> 20 );
-}
-#endif /* CONFIG_LCD_INFO */
 #endif
 
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
diff --git a/common/lcd.c b/common/lcd.c
index 53ff8dd744..36c97df5ff 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -524,11 +524,6 @@ static void lcd_logo(void)
 {
 	lcd_logo_plot(0, 0);
 
-#ifdef CONFIG_LCD_INFO
-	lcd_set_col(LCD_INFO_X / VIDEO_FONT_WIDTH);
-	lcd_set_row(LCD_INFO_Y / VIDEO_FONT_HEIGHT);
-	lcd_show_board_info();
-#endif /* CONFIG_LCD_INFO */
 }
 
 #ifdef CONFIG_SPLASHIMAGE_GUARD
diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig
index 0e9cb5d036..ddb8173693 100644
--- a/configs/pm9261_defconfig
+++ b/configs/pm9261_defconfig
@@ -68,6 +68,5 @@ CONFIG_DM_VIDEO=y
 CONFIG_ATMEL_LCD=y
 CONFIG_ATMEL_LCD_BGR555=y
 CONFIG_LCD=y
-CONFIG_LCD_INFO=y
 CONFIG_LCD_LOGO=y
 CONFIG_REGEX=y
diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig
index 2a16c833ae..9515c4c049 100644
--- a/configs/pm9263_defconfig
+++ b/configs/pm9263_defconfig
@@ -71,6 +71,5 @@ CONFIG_DM_VIDEO=y
 CONFIG_ATMEL_LCD=y
 CONFIG_ATMEL_LCD_BGR555=y
 CONFIG_LCD=y
-CONFIG_LCD_INFO=y
 CONFIG_LCD_LOGO=y
 CONFIG_JFFS2_NAND=y
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 9083267d00..7213d9ccc5 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -728,10 +728,6 @@ config LCD
 	  CONFIG option. See the README for details. Drives which have been
 	  converted to driver model will instead used CONFIG_DM_VIDEO.
 
-config LCD_INFO
-	bool "Show LCD info on-screen"
-	depends on LCD
-
 config LCD_LOGO
 	bool "Show a logo on screen"
 	depends on LCD
diff --git a/include/lcd.h b/include/lcd.h
index 751b0032ef..b4820037b2 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -144,14 +144,6 @@ void lcd_sync(void);
 #define LCD_COLOR16	4
 #define LCD_COLOR32	5
 
-#if defined(CONFIG_LCD_LOGO)
-#define LCD_INFO_X		(BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
-#define LCD_INFO_Y		VIDEO_FONT_HEIGHT
-#else
-#define LCD_INFO_X		VIDEO_FONT_WIDTH
-#define LCD_INFO_Y		VIDEO_FONT_HEIGHT
-#endif
-
 /* Default to 8bpp if bit depth not specified */
 #ifndef LCD_BPP
 #define LCD_BPP			LCD_COLOR8