spi: add spi-mem driver for MediaTek MT7629 SoC

This patch adds spi-mem driver for MediaTek MT7629 SoC
to access SPI-NOR and SPI-NAND flashes.

Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
[jagan: squash MAINTAINERS file]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

4 files changed, 329 insertions, 0 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index bc67c49965..fe6ca4e967 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -206,6 +206,7 @@ F:	drivers/pinctrl/mediatek/
 F:	drivers/power/domain/mtk-power-domain.c
 F:	drivers/ram/mediatek/
 F:	drivers/spi/mtk_qspi.c
+F:	drivers/spi/mtk_snfi_spi.c
 F:	drivers/timer/mtk_timer.c
 F:	drivers/watchdog/mtk_wdt.c
 F:	drivers/net/mtk_eth.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2ee0ac976d..b9f0327e34 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -166,6 +166,15 @@ config MTK_QSPI
 	  used to access the SPI NOR flash on platforms embedding this
 	  Mediatek QSPI IP core.
 
+config MTK_SNFI_SPI
+	bool "Mediatek SPI memory controller driver"
+	depends on SPI_MEM
+	help
+	  Enable the Mediatek SPI memory controller driver. This driver is
+	  originally based on the MediaTek SNFI IP core. It can only be
+	  used to access SPI memory devices like SPI-NOR or SPI-NAND on
+	  platforms embedding this IP core, like MT7622/M7629.
+
 config MVEBU_A3700_SPI
 	bool "Marvell Armada 3700 SPI driver"
 	select CLK_ARMADA_3720
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index d0ebaf339a..8a188a70a7 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_MESON_SPIFC) += meson_spifc.o
 obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o
 obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
 obj-$(CONFIG_MTK_QSPI) += mtk_qspi.o
+obj-$(CONFIG_MTK_SNFI_SPI) += mtk_snfi_spi.o
 obj-$(CONFIG_MT7621_SPI) += mt7621_spi.o
 obj-$(CONFIG_MSCC_BB_SPI) += mscc_bb_spi.o
 obj-$(CONFIG_MVEBU_A3700_SPI) += mvebu_a3700_spi.o
diff --git a/drivers/spi/mtk_snfi_spi.c b/drivers/spi/mtk_snfi_spi.c
new file mode 100644
index 0000000000..2a89476515
--- /dev/null
+++ b/drivers/spi/mtk_snfi_spi.c
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 MediaTek Inc. All Rights Reserved.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <errno.h>
+#include <spi.h>
+#include <spi-mem.h>
+#include <stdbool.h>
+#include <watchdog.h>
+#include <dm/pinctrl.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#define SNFI_MAC_CTL			0x500
+#define MAC_XIO_SEL			BIT(4)
+#define SF_MAC_EN			BIT(3)
+#define SF_TRIG				BIT(2)
+#define WIP_READY			BIT(1)
+#define WIP				BIT(0)
+
+#define SNFI_MAC_OUTL			0x504
+#define SNFI_MAC_INL			0x508
+
+#define SNFI_MISC_CTL			0x538
+#define SW_RST				BIT(28)
+#define FIFO_RD_LTC_SHIFT		25
+#define FIFO_RD_LTC			GENMASK(26, 25)
+#define LATCH_LAT_SHIFT			8
+#define LATCH_LAT			GENMASK(9, 8)
+#define CS_DESELECT_CYC_SHIFT		0
+#define CS_DESELECT_CYC			GENMASK(4, 0)
+
+#define SNF_STA_CTL1			0x550
+#define SPI_STATE			GENMASK(3, 0)
+
+#define SNFI_GPRAM_OFFSET		0x800
+#define SNFI_GPRAM_SIZE			0x80
+
+#define SNFI_POLL_INTERVAL		500000
+#define SNFI_RST_POLL_INTERVAL		1000000
+
+struct mtk_snfi_priv {
+	void __iomem *base;
+
+	struct clk nfi_clk;
+	struct clk pad_clk;
+};
+
+static int mtk_snfi_adjust_op_size(struct spi_slave *slave,
+				   struct spi_mem_op *op)
+{
+	u32 nbytes;
+
+	/*
+	 * When there is input data, it will be appended after the output
+	 * data in the GPRAM. So the total size of either pure output data
+	 * or the output+input data must not exceed the GPRAM size.
+	 */
+
+	nbytes = sizeof(op->cmd.opcode) + op->addr.nbytes +
+		op->dummy.nbytes;
+
+	if (nbytes + op->data.nbytes <= SNFI_GPRAM_SIZE)
+		return 0;
+
+	if (nbytes >= SNFI_GPRAM_SIZE)
+		return -ENOTSUPP;
+
+	op->data.nbytes = SNFI_GPRAM_SIZE - nbytes;
+
+	return 0;
+}
+
+static bool mtk_snfi_supports_op(struct spi_slave *slave,
+				 const struct spi_mem_op *op)
+{
+	if (op->cmd.buswidth > 1 || op->addr.buswidth > 1 ||
+	    op->dummy.buswidth > 1 || op->data.buswidth > 1)
+		return false;
+
+	return true;
+}
+
+static int mtk_snfi_mac_trigger(struct mtk_snfi_priv *priv,
+				struct udevice *bus, u32 outlen, u32 inlen)
+{
+	int ret;
+	u32 val;
+
+#ifdef CONFIG_PINCTRL
+	pinctrl_select_state(bus, "snfi");
+#endif
+
+	writel(SF_MAC_EN, priv->base + SNFI_MAC_CTL);
+	writel(outlen, priv->base + SNFI_MAC_OUTL);
+	writel(inlen, priv->base + SNFI_MAC_INL);
+
+	writel(SF_MAC_EN | SF_TRIG, priv->base + SNFI_MAC_CTL);
+
+	ret = readl_poll_timeout(priv->base + SNFI_MAC_CTL, val,
+				 val & WIP_READY, SNFI_POLL_INTERVAL);
+	if (ret) {
+		printf("%s: timed out waiting for WIP_READY\n", __func__);
+		goto cleanup;
+	}
+
+	ret = readl_poll_timeout(priv->base + SNFI_MAC_CTL, val,
+				 !(val & WIP), SNFI_POLL_INTERVAL);
+	if (ret)
+		printf("%s: timed out waiting for WIP cleared\n", __func__);
+
+	writel(0, priv->base + SNFI_MAC_CTL);
+
+cleanup:
+#ifdef CONFIG_PINCTRL
+	pinctrl_select_state(bus, "default");
+#endif
+
+	return ret;
+}
+
+static int mtk_snfi_mac_reset(struct mtk_snfi_priv *priv)
+{
+	int ret;
+	u32 val;
+
+	setbits_32(priv->base + SNFI_MISC_CTL, SW_RST);
+
+	ret = readl_poll_timeout(priv->base + SNF_STA_CTL1, val,
+				 !(val & SPI_STATE), SNFI_POLL_INTERVAL);
+	if (ret)
+		printf("%s: failed to reset snfi mac\n", __func__);
+
+	writel((2 << FIFO_RD_LTC_SHIFT) |
+		(10 << CS_DESELECT_CYC_SHIFT),
+		priv->base + SNFI_MISC_CTL);
+
+	return ret;
+}
+
+static void mtk_snfi_copy_to_gpram(struct mtk_snfi_priv *priv,
+				   const void *data, size_t len)
+{
+	void __iomem *gpram = priv->base + SNFI_GPRAM_OFFSET;
+	size_t i, n = (len + sizeof(u32) - 1) / sizeof(u32);
+	const u32 *buff = data;
+
+	/*
+	 * The output data will always be copied to the beginning of
+	 * the GPRAM. Uses word write for better performace.
+	 *
+	 * Trailing bytes in the last word are not cared.
+	 */
+
+	for (i = 0; i < n; i++)
+		writel(buff[i], gpram + i * sizeof(u32));
+}
+
+static void mtk_snfi_copy_from_gpram(struct mtk_snfi_priv *priv, u8 *cache,
+				     void *data, size_t pos, size_t len)
+{
+	void __iomem *gpram = priv->base + SNFI_GPRAM_OFFSET;
+	u32 *buff = (u32 *)cache;
+	size_t i, off, end;
+
+	/* Start position in the buffer */
+	off = pos & (sizeof(u32) - 1);
+
+	/* End position for copy */
+	end = (len + pos + sizeof(u32) - 1) & (~(sizeof(u32) - 1));
+
+	/* Start position for copy */
+	pos &= ~(sizeof(u32) - 1);
+
+	/*
+	 * Read aligned data from GPRAM to buffer first.
+	 * Uses word read for better performace.
+	 */
+	i = 0;
+	while (pos < end) {
+		buff[i++] = readl(gpram + pos);
+		pos += sizeof(u32);
+	}
+
+	/* Copy rx data */
+	memcpy(data, cache + off, len);
+}
+
+static int mtk_snfi_exec_op(struct spi_slave *slave,
+			    const struct spi_mem_op *op)
+{
+	struct udevice *bus = dev_get_parent(slave->dev);
+	struct mtk_snfi_priv *priv = dev_get_priv(bus);
+	u8 gpram_cache[SNFI_GPRAM_SIZE];
+	u32 i, len = 0, inlen = 0;
+	int addr_sh;
+	int ret;
+
+	WATCHDOG_RESET();
+
+	ret = mtk_snfi_mac_reset(priv);
+	if (ret)
+		return ret;
+
+	/* Put opcode */
+	gpram_cache[len++] = op->cmd.opcode;
+
+	/* Put address */
+	addr_sh = (op->addr.nbytes - 1) * 8;
+	while (addr_sh >= 0) {
+		gpram_cache[len++] = (op->addr.val >> addr_sh) & 0xff;
+		addr_sh -= 8;
+	}
+
+	/* Put dummy bytes */
+	for (i = 0; i < op->dummy.nbytes; i++)
+		gpram_cache[len++] = 0;
+
+	/* Put output data */
+	if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT) {
+		memcpy(gpram_cache + len, op->data.buf.out, op->data.nbytes);
+		len += op->data.nbytes;
+	}
+
+	/* Copy final output data to GPRAM */
+	mtk_snfi_copy_to_gpram(priv, gpram_cache, len);
+
+	/* Start one SPI transaction */
+	if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_IN)
+		inlen = op->data.nbytes;
+
+	ret = mtk_snfi_mac_trigger(priv, bus, len, inlen);
+	if (ret)
+		return ret;
+
+	/* Copy input data from GPRAM */
+	if (inlen)
+		mtk_snfi_copy_from_gpram(priv, gpram_cache, op->data.buf.in,
+					 len, inlen);
+
+	return 0;
+}
+
+static int mtk_snfi_spi_probe(struct udevice *bus)
+{
+	struct mtk_snfi_priv *priv = dev_get_priv(bus);
+	int ret;
+
+	priv->base = (void __iomem *)devfdt_get_addr(bus);
+	if (!priv->base)
+		return -EINVAL;
+
+	ret = clk_get_by_name(bus, "nfi_clk", &priv->nfi_clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_get_by_name(bus, "pad_clk", &priv->pad_clk);
+	if (ret < 0)
+		return ret;
+
+	clk_enable(&priv->nfi_clk);
+	clk_enable(&priv->pad_clk);
+
+	return 0;
+}
+
+static int mtk_snfi_set_speed(struct udevice *bus, uint speed)
+{
+	/*
+	 * The SNFI does not have a bus clock divider.
+	 * The bus clock is set in dts (pad_clk, UNIVPLL2_D8 = 50MHz).
+	 */
+
+	return 0;
+}
+
+static int mtk_snfi_set_mode(struct udevice *bus, uint mode)
+{
+	/* The SNFI supports only mode 0 */
+
+	if (mode)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct spi_controller_mem_ops mtk_snfi_mem_ops = {
+	.adjust_op_size = mtk_snfi_adjust_op_size,
+	.supports_op = mtk_snfi_supports_op,
+	.exec_op = mtk_snfi_exec_op,
+};
+
+static const struct dm_spi_ops mtk_snfi_spi_ops = {
+	.mem_ops	= &mtk_snfi_mem_ops,
+	.set_speed	= mtk_snfi_set_speed,
+	.set_mode	= mtk_snfi_set_mode,
+};
+
+static const struct udevice_id mtk_snfi_spi_ids[] = {
+	{ .compatible = "mediatek,mtk-snfi-spi" },
+	{ }
+};
+
+U_BOOT_DRIVER(mtk_snfi_spi) = {
+	.name			= "mtk_snfi_spi",
+	.id			= UCLASS_SPI,
+	.of_match		= mtk_snfi_spi_ids,
+	.ops			= &mtk_snfi_spi_ops,
+	.priv_auto_alloc_size	= sizeof(struct mtk_snfi_priv),
+	.probe			= mtk_snfi_spi_probe,
+};