usb: Drop unused ehci-faraday driver

This is not used. Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>

5 files changed, 0 insertions, 215 deletions

diff --git a/common/usb_hub.c b/common/usb_hub.c
index f7fd12c045..85c0822d8b 100644
--- a/common/usb_hub.c
+++ b/common/usb_hub.c
@@ -507,11 +507,6 @@ static int usb_scan_port(struct usb_device_scan *usb_scan)
 		debug("port %d enable change, status %x\n", i + 1, portstatus);
 		usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_ENABLE);
 		/*
-		 * The following hack causes a ghost device problem
-		 * to Faraday EHCI
-		 */
-#ifndef CONFIG_USB_EHCI_FARADAY
-		/*
 		 * EM interference sometimes causes bad shielded USB
 		 * devices to be shutdown by the hub, this hack enables
 		 * them again. Works at least with mouse driver
@@ -523,7 +518,6 @@ static int usb_scan_port(struct usb_device_scan *usb_scan)
 			      i + 1);
 			usb_hub_port_connect_change(dev, i);
 		}
-#endif
 	}
 
 	if (portstatus & USB_PORT_STAT_SUSPEND) {
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 1f59e910d3..cce78846d9 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_USB_OHCI_NPCM) += ohci-npcm.o
 obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
 obj-$(CONFIG_USB_EHCI_ATMEL) += ehci-atmel.o
 obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
-obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
 obj-$(CONFIG_USB_EHCI_GENERIC) += ehci-generic.o
 obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
 obj-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
diff --git a/drivers/usb/host/ehci-faraday.c b/drivers/usb/host/ehci-faraday.c
deleted file mode 100644
index 85a3526960..0000000000
--- a/drivers/usb/host/ehci-faraday.c
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Faraday USB 2.0 EHCI Controller
- *
- * (C) Copyright 2010 Faraday Technology
- * Dante Su <dantesu@faraday-tech.com>
- */
-
-#include <common.h>
-#include <log.h>
-#include <asm/io.h>
-#include <usb.h>
-#include <linux/delay.h>
-#include <usb/fusbh200.h>
-#include <usb/fotg210.h>
-
-#include "ehci.h"
-
-#ifndef CFG_USB_EHCI_BASE_LIST
-#define CFG_USB_EHCI_BASE_LIST	{ CONFIG_USB_EHCI_BASE }
-#endif
-
-union ehci_faraday_regs {
-	struct fusbh200_regs usb;
-	struct fotg210_regs  otg;
-};
-
-static inline int ehci_is_fotg2xx(union ehci_faraday_regs *regs)
-{
-	return !readl(&regs->usb.easstr);
-}
-
-void faraday_ehci_set_usbmode(struct ehci_ctrl *ctrl)
-{
-	/* nothing needs to be done */
-}
-
-int faraday_ehci_get_port_speed(struct ehci_ctrl *ctrl, uint32_t reg)
-{
-	int spd, ret = PORTSC_PSPD_HS;
-	union ehci_faraday_regs *regs;
-
-	ret = (void __iomem *)((ulong)ctrl->hcor - 0x10);
-	if (ehci_is_fotg2xx(regs))
-		spd = OTGCSR_SPD(readl(&regs->otg.otgcsr));
-	else
-		spd = BMCSR_SPD(readl(&regs->usb.bmcsr));
-
-	switch (spd) {
-	case 0:    /* full speed */
-		ret = PORTSC_PSPD_FS;
-		break;
-	case 1:    /* low  speed */
-		ret = PORTSC_PSPD_LS;
-		break;
-	case 2:    /* high speed */
-		ret = PORTSC_PSPD_HS;
-		break;
-	default:
-		printf("ehci-faraday: invalid device speed\n");
-		break;
-	}
-
-	return ret;
-}
-
-uint32_t *faraday_ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port)
-{
-	/* Faraday EHCI has one and only one portsc register */
-	if (port) {
-		/* Printing the message would cause a scan failure! */
-		debug("The request port(%d) is not configured\n", port);
-		return NULL;
-	}
-
-	/* Faraday EHCI PORTSC register offset is 0x20 from hcor */
-	return (uint32_t *)((uint8_t *)ctrl->hcor + 0x20);
-}
-
-static const struct ehci_ops faraday_ehci_ops = {
-	.set_usb_mode		= faraday_ehci_set_usbmode,
-	.get_port_speed		= faraday_ehci_get_port_speed,
-	.get_portsc_register	= faraday_ehci_get_portsc_register,
-};
-
-/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **ret_hccr, struct ehci_hcor **ret_hcor)
-{
-	struct ehci_hccr *hccr;
-	struct ehci_hcor *hcor;
-	union ehci_faraday_regs *regs;
-	uint32_t base_list[] = CFG_USB_EHCI_BASE_LIST;
-
-	if (index < 0 || index >= ARRAY_SIZE(base_list))
-		return -1;
-	ehci_set_controller_priv(index, NULL, &faraday_ehci_ops);
-	regs = (void __iomem *)base_list[index];
-	hccr = (struct ehci_hccr *)&regs->usb.hccr;
-	hcor = (struct ehci_hcor *)&regs->usb.hcor;
-
-	if (ehci_is_fotg2xx(regs)) {
-		/* A-device bus reset */
-		/* ... Power off A-device */
-		setbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSDROP);
-		/* ... Drop vbus and bus traffic */
-		clrbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSREQ);
-		mdelay(1);
-		/* ... Power on A-device */
-		clrbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSDROP);
-		/* ... Drive vbus and bus traffic */
-		setbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSREQ);
-		mdelay(1);
-		/* Disable OTG & DEV interrupts, triggered at level-high */
-		writel(IMR_IRQLH | IMR_OTG | IMR_DEV, &regs->otg.imr);
-		/* Clear all interrupt status */
-		writel(ISR_HOST | ISR_OTG | ISR_DEV, &regs->otg.isr);
-	} else {
-		/* Interrupt=level-high */
-		setbits_le32(&regs->usb.bmcsr, BMCSR_IRQLH);
-		/* VBUS on */
-		clrbits_le32(&regs->usb.bmcsr, BMCSR_VBUS_OFF);
-		/* Disable all interrupts */
-		writel(0x00, &regs->usb.bmier);
-		writel(0x1f, &regs->usb.bmisr);
-	}
-
-	*ret_hccr = hccr;
-	*ret_hcor = hcor;
-
-	return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
-{
-	return 0;
-}
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 9139d61dd0..9839aa1749 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -705,12 +705,10 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
 		dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(qhtoken);
 	} else {
 		dev->act_len = 0;
-#ifndef CONFIG_USB_EHCI_FARADAY
 		debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n",
 		      dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts),
 		      ehci_readl(&ctrl->hcor->or_portsc[0]),
 		      ehci_readl(&ctrl->hcor->or_portsc[1]));
-#endif
 	}
 
 	free(qtd);
@@ -1190,9 +1188,6 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
 	if (rc)
 		return rc;
 #endif
-#ifdef CONFIG_USB_EHCI_FARADAY
-	tweaks |= EHCI_TWEAK_NO_INIT_CF;
-#endif
 	rc = ehci_common_init(ctrl, tweaks);
 	if (rc)
 		return rc;
diff --git a/include/usb/fusbh200.h b/include/usb/fusbh200.h
deleted file mode 100644
index 6ae1d84880..0000000000
--- a/include/usb/fusbh200.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Faraday USB 2.0 EHCI Controller
- *
- * (C) Copyright 2010 Faraday Technology
- * Dante Su <dantesu@faraday-tech.com>
- */
-
-#ifndef _FUSBH200_H
-#define _FUSBH200_H
-
-struct fusbh200_regs {
-	struct {
-		uint32_t data[4];
-	} hccr;			/* 0x00 - 0x0f: hccr */
-	struct {
-		uint32_t data[9];
-	} hcor;			/* 0x10 - 0x33: hcor */
-	uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */
-	uint32_t rsvd[2];
-	uint32_t bmcsr;	/* 0x40: Bus Monitor Control Status Register */
-	uint32_t bmisr;	/* 0x44: Bus Monitor Interrupt Status Register */
-	uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */
-};
-
-/* EOF & Async. Schedule Sleep Timer Register */
-#define EASSTR_RUNNING  (1 << 6) /* Put transceiver in running/resume mode */
-#define EASSTR_SUSPEND  (0 << 6) /* Put transceiver in suspend mode */
-#define EASSTR_EOF2(x)  (((x) & 0x3) << 4) /* EOF 2 Timing */
-#define EASSTR_EOF1(x)  (((x) & 0x3) << 2) /* EOF 1 Timing */
-#define EASSTR_ASST(x)  (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
-
-/* Bus Monitor Control Status Register */
-#define BMCSR_SPD_HIGH  (2 << 9) /* Speed of the attached device */
-#define BMCSR_SPD_LOW   (1 << 9)
-#define BMCSR_SPD_FULL  (0 << 9)
-#define BMCSR_SPD_MASK  (3 << 9)
-#define BMCSR_SPD_SHIFT 9
-#define BMCSR_SPD(x)    ((x >> 9) & 0x03)
-#define BMCSR_VBUS      (1 << 8) /* VBUS Valid */
-#define BMCSR_VBUS_OFF  (1 << 4) /* VBUS Off */
-#define BMCSR_VBUS_ON   (0 << 4) /* VBUS On */
-#define BMCSR_IRQLH     (1 << 3) /* IRQ triggered at level-high */
-#define BMCSR_IRQLL     (0 << 3) /* IRQ triggered at level-low */
-#define BMCSR_HALFSPD   (1 << 2) /* Half speed mode for FPGA test */
-#define BMCSR_HFT_LONG  (1 << 1) /* HDISCON noise filter = 270 us*/
-#define BMCSR_HFT       (0 << 1) /* HDISCON noise filter = 135 us*/
-#define BMCSR_VFT_LONG  (1 << 1) /* VBUS noise filter = 472 us*/
-#define BMCSR_VFT       (0 << 1) /* VBUS noise filter = 135 us*/
-
-/* Bus Monitor Interrupt Status Register */
-/* Bus Monitor Interrupt Enable Register */
-#define BMISR_DMAERR    (1 << 4) /* DMA error */
-#define BMISR_DMA       (1 << 3) /* DMA complete */
-#define BMISR_DEVRM     (1 << 2) /* device removed */
-#define BMISR_OVD       (1 << 1) /* over-current detected */
-#define BMISR_VBUSERR   (1 << 0) /* VBUS error */
-
-#endif