diff options
| author | Marcel Ziswiler <marcel.ziswiler@toradex.com> | 2012-10-18 11:26:22 +0200 |
|---|---|---|
| committer | Marcel Ziswiler <marcel.ziswiler@toradex.com> | 2012-10-18 11:26:22 +0200 |
| commit | 22e3ede7d034616be39c48656a16d96fbfb27f43 (patch) | |
| tree | 7a858d088ad9ab23521c043a9b55e55ef15e1eae | |
| parent | b6f2c189579922a34c0d3c3a9baba6a9531f9a37 (diff) | |
colibri_t20: fix SD boot bootdevice
Change SD boot bootdevice in environment variable sdargs from mmcblk3p1
to mmcblk0p1 due to later kernels using a different numbering scheme.
While at it clean-up some white space indentation stuff.
| -rw-r--r-- | include/configs/colibri_t20.h | 29 |
1 files changed, 14 insertions, 15 deletions
diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index 728f7900298..24721ff5734 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -155,9 +155,9 @@ //moved from disk/part_efi.h to here, give the block where the GP1 partition starts //compare with sdargs below #ifdef __CONFIG_SDBOOT_H -#define GPT_PRIMARY_PARTITION_TABLE_LBA 18945ULL +#define GPT_PRIMARY_PARTITION_TABLE_LBA 18945ULL #else -#define GPT_PRIMARY_PARTITION_TABLE_LBA 1ULL +#define GPT_PRIMARY_PARTITION_TABLE_LBA 1ULL #endif #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -168,7 +168,7 @@ "mmcboot=" MMC_BOOTCMD "\0" \ "nfsargs=ip=:::::eth0:on root=/dev/nfs rw netdevwait\0" \ "ramargs=initrd=0xA1800000,32M ramdisk_size=32768 root=/dev/ram0 rw\0" \ - "sdargs=root=/dev/mmcblk3p1 ip=:::::eth0:off rw,noatime rootfstype=ext3 rootwait gpt gpt_sector=18945\0" \ + "sdargs=root=/dev/mmcblk0p1 ip=:::::eth0:off rw,noatime rootfstype=ext3 rootwait gpt gpt_sector=18945\0" \ "sdboot=" SD_BOOTCMD "\0" \ "setup=setenv setupargs asix_mac=${ethaddr} no_console_suspend=1 console=tty1 console=ttyS0,${baudrate}n8 debug_uartport=lsport,0 ${memargs}\0" \ "ubiargs=ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs\0" \ @@ -177,9 +177,9 @@ "" /* Dynamic MTD partition support */ -#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ -#define CONFIG_MTD_PARTITIONS /* ??? */ -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ +#define CONFIG_MTD_PARTITIONS /* ??? */ +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define MTDIDS_DEFAULT "nand0=tegra_nand" /* GPIO */ @@ -213,14 +213,13 @@ //#define CONFIG_ENV_IS_NOWHERE #ifndef CONFIG_ENV_IS_NOWHERE /* Environment stored in NAND flash */ -#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ #if defined(CONFIG_ENV_IS_IN_NAND) /* once the nand is detected the corresponding setting is taken */ -#define CONFIG_ENV_OFFSET (gd->env_offset) -#define CONFIG_ENV_RANGE 0x80000 -#endif - -#endif +#define CONFIG_ENV_OFFSET (gd->env_offset) +#define CONFIG_ENV_RANGE 0x80000 +#endif /* CONFIG_ENV_IS_IN_NAND */ +#endif /* !CONFIG_ENV_IS_NOWHERE */ /* * LCDC configuration @@ -229,10 +228,10 @@ #define CONFIG_VIDEO_TEGRA /* TODO: This needs to be configurable at run-time */ -#define LCD_BPP LCD_COLOR16 -#define CONFIG_SYS_WHITE_ON_BLACK /* Console colors */ +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK /* Console colors */ -#define CONFIG_DEFAULT_DEVICE_TREE "colibri_t20" +#define CONFIG_DEFAULT_DEVICE_TREE "colibri_t20" /* NAND support */ #define CONFIG_CMD_NAND |