ti816x: Modernize the defconfig

- Switch to using <configs/ti_armv7_omap.h> and family.  This lets us
  drop lots of custom defines.
- Ensure that our default environment uses DEFAULT_LINUX_BOOT_ENV so
  that Linux will boot correctly.
- Enable CONFIG_DISTRO_DEFAULTS
- Switch to using CONFIG_OF_CONTROL
- Various other cleanups to match other SoCs in the family line.

Signed-off-by: Tom Rini <trini@konsulko.com>

3 files changed, 28 insertions, 49 deletions

diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
index 8f07e2c9aa..577e60f875 100644
--- a/board/ti/ti816x/evm.c
+++ b/board/ti/ti816x/evm.c
@@ -24,7 +24,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int board_init(void)
 {
-	gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 #if defined(CONFIG_NAND)
 	gpmc_init();
 #endif
diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig
index 4f9019220b..729b709df9 100644
--- a/configs/ti816x_evm_defconfig
+++ b/configs/ti816x_evm_defconfig
@@ -8,25 +8,32 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="dm8168-evm"
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL=y
+CONFIG_SPL_STACK_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
-CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="u-boot/ti816x# "
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
 # CONFIG_USE_PRIVATE_LIBGCC is not set
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index a1584851b9..27c6479ccc 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -13,21 +13,16 @@
 #define CONFIG_TI81XX
 #define CONFIG_TI816X
 
-#define CONFIG_ARCH_CPU_INIT
-
+#include <configs/ti_armv7_omap.h>
 #include <asm/arch/omap.h>
 
 #define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (32 * 1024))
-#define CONFIG_SYS_LONGHELP		/* undef save memory */
 #define CONFIG_MACH_TYPE		MACH_TYPE_TI8168EVM
 
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG		/* required for ramdisk support */
-
 #define CONFIG_EXTRA_ENV_SETTINGS	\
-	"loadaddr=0x81000000\0"		\
+	DEFAULT_LINUX_BOOT_ENV \
+	"mtdids=" MTDIDS_DEFAULT "\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
 
 #define CONFIG_BOOTCOMMAND			\
 	"mmc rescan;"				\
@@ -40,26 +35,10 @@
 #define V_OSCK          24000000    /* Clock output from T2 */
 #define V_SCLK          (V_OSCK >> 1)
 
-#define CONFIG_SYS_MAXARGS	32
-#define CONFIG_SYS_CBSIZE	512 /* console I/O buffer size */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+ sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* boot arg buffer size */
-
-#define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
-
 #define CONFIG_CMD_ASKENV
 
-#define CONFIG_NR_DRAM_BANKS	2		/* we have 2 banks of DRAM */
-#define PHYS_DRAM_1		0x80000000	/* DRAM Bank #1 */
-#define PHYS_DRAM_1_SIZE        0x40000000	/* 1 GB */
-#define PHYS_DRAM_2		0xC0000000	/* DRAM Bank #2 */
-#define PHYS_DRAM_2_SIZE	0x40000000	/* 1 GB */
-
 #define CONFIG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2048MB */
-#define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \
-		GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
 
 /**
  * Platform/Board specific defs
@@ -92,11 +71,7 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
 /* NAND: SPL related configs */
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_AM33XX_BCH
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 
 /* NAND: device related configs */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -107,7 +82,6 @@
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 /* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_NAND_OMAP_GPMC_PREFETCH
 #define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
@@ -144,24 +118,13 @@
 /* SPL */
 /* Defines for SPL */
 #define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE    0x40400000
 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
 					 CONFIG_SPL_TEXT_BASE)
 
-#define CONFIG_SPL_BSS_START_ADDR   0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE     0x80000     /* 512 KB */
-
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
-
-#define CONFIG_SYS_SPI_U_BOOT_OFFS  0x20000
-#define CONFIG_SYS_SPI_U_BOOT_SIZE  0x40000
 #define CONFIG_SPL_LDSCRIPT     "arch/arm/mach-omap2/u-boot-spl.lds"
 
 #define CONFIG_SYS_TEXT_BASE        0x80800000
-#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE  0x100000
 
 /* Since SPL did pll and ddr initialization for us,
  * we don't need to do it twice.
@@ -170,4 +133,13 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
 
+/*
+ * Disable MMC DM for SPL build and can be re-enabled after adding
+ * DM support in SPL
+ */
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_MMC
+#undef CONFIG_TIMER
+#undef CONFIG_DM_USB
+#endif
 #endif