Add board support for armadillo HT1070

Patch by Rowel Atienza, 06 Apr 2005

20 files changed, 875 insertions, 118 deletions

diff --git a/CHANGELOG b/CHANGELOG
index bf513a2c06c..7955d5fe973 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
 Changes for U-Boot 1.1.4:
 ======================================================================
 
+* Add board support for armadillo HT1070
+  Patch by Rowel Atienza, 06 Apr 2005
+
 * Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
   Patch by Vitaly Bordug, 30 Mar 2005
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 020c029fcae..d251cd8e520 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -351,6 +351,10 @@ Unknown / orphaned boards:
 #	Board			CPU					#
 #########################################################################
 
+Rowel Atienza <rowel@diwalabs.com>
+
+	armadillo		ARM720T
+
 Rishi Bhattacharya <rishi@ti.com>
 
 	omap5912osk		ARM926EJS
diff --git a/MAKEALL b/MAKEALL
index 8da64f0027e..93bd4c9b1b9 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -161,8 +161,8 @@ LIST_SA="assabet dnp1110 gcplus lart shannon"
 #########################################################################
 
 LIST_ARM7="	\
-	B2		ep7312		evb4510		impa7		\
-	integratorap_CM720T		integratorap_CM7TDMI		\
+	armadillo	B2		ep7312		evb4510		\
+	impa7		integratorap_CM720T	integratorap_CM7TDMI	\
 	modnet50							\
 "
 
diff --git a/Makefile b/Makefile
index 310a75e7ca7..157201f8f77 100644
--- a/Makefile
+++ b/Makefile
@@ -1684,6 +1684,9 @@ B2_config	:	unconfig
 ## ARM720T Systems
 #########################################################################
 
+armadillo_config:	unconfig
+	@./mkconfig $(@:_config=) arm arm720t armadillo
+
 ep7312_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm720t ep7312
 
diff --git a/README b/README
index 9c3ff3844e6..ce5ad4c95f6 100644
--- a/README
+++ b/README
@@ -302,13 +302,13 @@ The following options need to be configured:
 		ARM based boards:
 		-----------------
 
-		CONFIG_AT91RM9200DK,	CONFIG_CERF250,		CONFIG_DNP1110,
-		CONFIG_EP7312,		CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
-		CONFIG_IMPA7,		CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
-		CONFIG_LART,		CONFIG_LPD7A400		CONFIG_LUBBOCK,
-		CONFIG_OSK_OMAP5912,	CONFIG_OMAP2420H4,	CONFIG_SHANNON,
-		CONFIG_P2_OMAP730,	CONFIG_SMDK2400,	CONFIG_SMDK2410,
-		CONFIG_TRAB,		CONFIG_VCMA9
+		CONFIG_ARMADILLO,	CONFIG_AT91RM9200DK,	CONFIG_CERF250,
+		CONFIG_DNP1110, 	CONFIG_EP7312,		CONFIG_H2_OMAP1610,
+		CONFIG_HHP_CRADLE,	CONFIG_IMPA7,		CONFIG_INNOVATOROMAP1510,
+		CONFIG_INNOVATOROMAP1610, CONFIG_LART,		CONFIG_LPD7A400,
+		CONFIG_LUBBOCK,		CONFIG_OSK_OMAP5912,	CONFIG_OMAP2420H4,
+		CONFIG_SHANNON,		CONFIG_P2_OMAP730,	CONFIG_SMDK2400,
+		CONFIG_SMDK2410,	CONFIG_TRAB,		CONFIG_VCMA9
 
 		MicroBlaze based boards:
 		------------------------
diff --git a/board/armadillo/Makefile b/board/armadillo/Makefile
new file mode 100644
index 00000000000..52ea7f28d44
--- /dev/null
+++ b/board/armadillo/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2002
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= armadillo.o flash.o
+SOBJS	:= lowlevel_init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/armadillo/armadillo.c b/board/armadillo/armadillo.c
new file mode 100644
index 00000000000..de04c663854
--- /dev/null
+++ b/board/armadillo/armadillo.c
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
+ * Armadillo board HT1070
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <clps7111.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* Activate LED flasher */
+	IO_LEDFLSH = 0x40;
+
+	/* arch number MACH_TYPE_ARMADILLO - not official*/
+	gd->bd->bi_arch_number = 83;
+
+	/* location of boot parameters */
+	gd->bd->bi_boot_params = 0xc0000100;
+
+	return 0;
+}
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return (0);
+}
diff --git a/board/armadillo/config.mk b/board/armadillo/config.mk
new file mode 100644
index 00000000000..23c432f165e
--- /dev/null
+++ b/board/armadillo/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#address where u-boot will be relocated
+TEXT_BASE = 0xc0f80000
diff --git a/board/armadillo/flash.c b/board/armadillo/flash.c
new file mode 100644
index 00000000000..f25a8e7bba6
--- /dev/null
+++ b/board/armadillo/flash.c
@@ -0,0 +1,336 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
+ * Flash driver for armadillo board HT1070
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#define FLASH_BANK_SIZE 0x400000
+
+/*value used by hermit is 0x200*/
+/*document says sector size is either 64k in low mem reg and 8k in high mem reg*/
+#define MAIN_SECT_SIZE  0x10000
+
+#define UNALIGNED_MASK (3)
+#define FL_WORD(addr) (*(volatile unsigned short*)(addr))
+#define FLASH_TIMEOUT 20000000
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init (void)
+{
+	int i, j;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;
+
+		flash_info[i].flash_id = (FUJ_MANUFACT & FLASH_VENDMASK);
+		/*(INTEL_ID_28F128J3 & FLASH_TYPEMASK); */
+		flash_info[i].size = FLASH_BANK_SIZE;
+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		if (i == 0)
+			flashbase = PHYS_FLASH_1;
+		else
+			panic ("configured too many flash banks!\n");
+		for (j = 0; j < flash_info[i].sector_count; j++) {
+			flash_info[i].start[j] =
+				flashbase + j * MAIN_SECT_SIZE;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors
+	 */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_FLASH_BASE,
+		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       &flash_info[0]);
+
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case (FUJ_MANUFACT & FLASH_VENDMASK):
+		printf ("Fujitsu: ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+/*
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
+		printf ("28F128J3 (128Mbit)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		goto Done;
+		break;
+	}
+*/
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 5) == 0) {
+			printf ("\n   ");
+		}
+		printf (" %08lX%s", info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+
+      Done:
+}
+
+/*
+ *  * Loop until both write state machines complete.
+ *   */
+static unsigned short flash_status_wait (unsigned long addr,
+					 unsigned short value)
+{
+	unsigned short status;
+	long timeout = FLASH_TIMEOUT;
+
+	while (((status = (FL_WORD (addr))) != value) && timeout > 0) {
+		timeout--;
+	}
+	return status;
+}
+
+/*
+ * Loop until the Write State machine is ready, then do a full error
+ * check.  Clear status and leave the flash in Read Array mode; return
+ * 0 for no error, -1 for error.
+ */
+static int flash_status_full_check (unsigned long addr, unsigned short value1,
+				    unsigned short value2)
+{
+	unsigned short status1, status2;
+
+	status1 = flash_status_wait (addr, value1);
+	status2 = flash_status_wait (addr + 2, value2);
+	return (status1 != value1 || status2 != value2) ? -1 : 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	int rc = ERR_OK;
+	unsigned long base;
+	unsigned long addr;
+
+	if ((info->flash_id & FLASH_VENDMASK) !=
+	    (FUJ_MANUFACT & FLASH_VENDMASK)) {
+		return ERR_UNKNOWN_FLASH_VENDOR;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+	if (prot)
+		return ERR_PROTECTED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts ();
+
+	printf ("Erasing %d sectors starting at sector %2d.\n"
+		"This make take some time ... ",
+		s_last - s_first, sect);
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+		/* ARM simple, non interrupt dependent timer */
+		reset_timer_masked ();
+
+		if (info->protect[sect] == 0) {	/* not protected */
+
+			addr = sect * MAIN_SECT_SIZE;
+			addr &= ~(unsigned long) UNALIGNED_MASK;	/* word align */
+			base = addr & 0xF0000000;
+
+			FL_WORD (base + (0x555 << 1)) = 0xAA;
+			FL_WORD (base + (0x2AA << 1)) = 0x55;
+			FL_WORD (base + (0x555 << 1)) = 0x80;
+			FL_WORD (base + (0x555 << 1)) = 0xAA;
+			FL_WORD (base + (0x2AA << 1)) = 0x55;
+			FL_WORD (addr) = 0x30;
+			if (flash_status_full_check (addr, 0xFFFF, 0xFFFF))
+				return ERR_PROTECTED;
+		}
+	}
+	printf ("\nDone.\n");
+	if (ctrlc ())
+		printf ("User Interrupt!\n");
+
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked (10000);
+
+	if (flag)
+		enable_interrupts ();
+
+	return rc;
+}
+
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+static int write_word (flash_info_t * info, ulong dest, ushort data)
+{
+	int flag;
+	unsigned long base;
+
+	/* Check if Flash is (sufficiently) erased
+	 */
+	if ((FL_WORD (dest) & data) != data)
+		return ERR_NOT_ERASED;
+
+	/*if(dest & UNALIGNED_MASK) return ERR_ALIGN; */
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts ();
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	base = dest & 0xF0000000;
+	FL_WORD (base + (0x555 << 1)) = 0xAA;
+	FL_WORD (base + (0x2AA << 1)) = 0x55;
+	FL_WORD (base + (0x555 << 1)) = 0xA0;
+	FL_WORD (dest) = data;
+	/*printf("writing 0x%p = 0x%x\n",dest,data); */
+	if (flash_status_wait (dest, data) != data)
+		return ERR_PROG_ERROR;
+
+	if (flag)
+		enable_interrupts ();
+
+	return ERR_OK;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	ushort data;
+	int l;
+	int i, rc;
+
+	wp = (addr & ~1);	/* get lower word aligned address */
+	printf ("Writing %d short data to 0x%p from 0x%p.\n ", cnt, wp, src);
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		}
+		for (; i < 2 && cnt > 0; ++i) {
+			data = (data >> 8) | (*src++ << 8);
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 2; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		}
+
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 2;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 2) {
+		data = *((vu_short *) src);
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		src += 2;
+		wp += 2;
+		cnt -= 2;
+	}
+
+	if (cnt == 0) {
+		printf ("\nDone.\n");
+		return ERR_OK;
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
+		data = (data >> 8) | (*src++ << 8);
+		--cnt;
+	}
+	for (; i < 2; ++i, ++cp) {
+		data = (data >> 8) | (*(uchar *) cp << 8);
+	}
+
+	return write_word (info, wp, data);
+}
diff --git a/board/armadillo/lowlevel_init.S b/board/armadillo/lowlevel_init.S
new file mode 100644
index 00000000000..6cf642611cd
--- /dev/null
+++ b/board/armadillo/lowlevel_init.S
@@ -0,0 +1,66 @@
+/*
+ * Initialization stuff - taken from hermit
+ * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
+ * Armadillo board HT1070
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+/* setting up the memory */
+#define 	SRAM_START 	0x60000000
+#define 	SRAM_SIZE	0x0000c000
+
+.globl lowlevel_init
+lowlevel_init:
+	mov	r0, #0x70		/* 32-bit code + data, MMU mandatory */
+	mcr	p15, 0, r0, c1, c0, 0	/* MMU init */
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	mov	r0, #0x80000000		/* I/O base */
+
+	mov	r1, #0x6		/* CLKCTL_73 in SYSCON3 */
+	add	r2, r0, #0x2200		/* address of SYSCON3 in r2 */
+	str	r1, [r2]		/* set clock speed to 73.728 MHz */
+
+	mov	r1, #0x81		/* 64KHz DRAM refresh period */
+	str	r1, [r0, #0x200]	/* set DRFPR */
+
+	mov	r1, #0x500		/* permanent enable, 16bits wide */
+	add	r1, r1, #0x42		/* 128Mbit, CAS lat = 2 SDRAM */
+	add	r2, r0, #0x2300		/* load address in r2 */
+	str	r1, [r2]
+
+	mov	r1, #0x100		/* SDRAM refresh rate */
+	add	r2, r0, #0x2340		/* load address in r2 */
+	str	r1, [r2]
+
+	mov	sp, #SRAM_START		/* init stack pointer */
+	add	sp, sp, #SRAM_SIZE
+
+	/* everything is fine now */
+	mov	pc, lr
diff --git a/board/armadillo/u-boot.lds b/board/armadillo/u-boot.lds
new file mode 100644
index 00000000000..64d946c4392
--- /dev/null
+++ b/board/armadillo/u-boot.lds
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/arm720t/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c
index 5421aff7def..fcca360732b 100644
--- a/cpu/arm720t/cpu.c
+++ b/cpu/arm720t/cpu.c
@@ -57,7 +57,7 @@ int cleanup_before_linux (void)
 	 * and we set the CPU-speed to 73 MHz - see start.S for details
 	 */
 
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
 	unsigned long i;
 
 	disable_interrupts ();
@@ -95,7 +95,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
  *
  */
 
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM)
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO)
 /* read co-processor 15, register #1 (control register) */
 static unsigned long read_p15_c1(void)
 {
diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c
index ab28e602c55..d0eaca5e027 100644
--- a/cpu/arm720t/interrupts.c
+++ b/cpu/arm720t/interrupts.c
@@ -180,7 +180,7 @@ void do_fiq (struct pt_regs *pt_regs)
 
 void do_irq (struct pt_regs *pt_regs)
 {
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM)
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO)
 	printf ("interrupt request\n");
 	show_regs (pt_regs);
 	bad_mode ();
@@ -233,7 +233,7 @@ int interrupt_init (void)
 
 	/* set timer 2 counter */
 	lastdec = TIMER_LOAD_VAL;
-#elif defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
+#elif defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
 	/* disable all interrupts */
 	IO_INTMR1 = 0;
 
@@ -301,7 +301,7 @@ int interrupt_init (void)
  */
 
 
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM)
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO)
 
 void reset_timer (void)
 {
diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c
index a5da4b76b62..0f999795087 100644
--- a/cpu/arm720t/serial.c
+++ b/cpu/arm720t/serial.c
@@ -30,7 +30,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
 
 #include <clps7111.h>
 
diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
index 3695465e709..eb26476a666 100644
--- a/cpu/arm720t/start.S
+++ b/cpu/arm720t/start.S
@@ -188,7 +188,7 @@ _start_armboot: .word start_armboot
  *************************************************************************
  */
 
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
 
 /* Interupt-Controller base addresses */
 INTMR1:		.word	0x80000280 @ 32 bit size
@@ -209,7 +209,7 @@ SYSCON3:	.word	0x80002200
 #endif
 
 cpu_init_crit:
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
 
 	/*
 	 * mask all IRQs by clearing all bits in the INTMRs
@@ -495,7 +495,7 @@ fiq:
 
 #endif
 
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312)
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
 	.align	5
 .globl reset_cpu
 reset_cpu:
diff --git a/drivers/eepro100.c b/drivers/eepro100.c
index 9db7bd80c2d..0054e87571f 100644
--- a/drivers/eepro100.c
+++ b/drivers/eepro100.c
@@ -34,67 +34,67 @@
 
 	/* Ethernet chip registers.
 	 */
-#define SCBStatus       	0	/* Rx/Command Unit Status *Word* */
-#define SCBIntAckByte   	1	/* Rx/Command Unit STAT/ACK byte */
-#define SCBCmd          	2	/* Rx/Command Unit Command *Word* */
-#define SCBIntrCtlByte  	3	/* Rx/Command Unit Intr.Control Byte */
-#define SCBPointer      	4	/* General purpose pointer. */
-#define SCBPort         	8	/* Misc. commands and operands. */
-#define SCBflash        	12	/* Flash memory control. */
-#define SCBeeprom       	14	/* EEPROM memory control. */
-#define SCBCtrlMDI      	16	/* MDI interface control. */
-#define SCBEarlyRx      	20	/* Early receive byte count. */
-#define SCBGenControl   	28	/* 82559 General Control Register */
-#define SCBGenStatus    	29	/* 82559 General Status register */
+#define SCBStatus		0	/* Rx/Command Unit Status *Word* */
+#define SCBIntAckByte		1	/* Rx/Command Unit STAT/ACK byte */
+#define SCBCmd			2	/* Rx/Command Unit Command *Word* */
+#define SCBIntrCtlByte		3	/* Rx/Command Unit Intr.Control Byte */
+#define SCBPointer		4	/* General purpose pointer. */
+#define SCBPort			8	/* Misc. commands and operands. */
+#define SCBflash		12	/* Flash memory control. */
+#define SCBeeprom		14	/* EEPROM memory control. */
+#define SCBCtrlMDI		16	/* MDI interface control. */
+#define SCBEarlyRx		20	/* Early receive byte count. */
+#define SCBGenControl		28	/* 82559 General Control Register */
+#define SCBGenStatus		29	/* 82559 General Status register */
 
 	/* 82559 SCB status word defnitions
 	 */
-#define SCB_STATUS_CX   	0x8000	/* CU finished command (transmit) */
-#define SCB_STATUS_FR   	0x4000	/* frame received */
-#define SCB_STATUS_CNA  	0x2000	/* CU left active state */
-#define SCB_STATUS_RNR  	0x1000	/* receiver left ready state */
-#define SCB_STATUS_MDI  	0x0800	/* MDI read/write cycle done */
-#define SCB_STATUS_SWI  	0x0400	/* software generated interrupt */
-#define SCB_STATUS_FCP  	0x0100	/* flow control pause interrupt */
+#define SCB_STATUS_CX		0x8000	/* CU finished command (transmit) */
+#define SCB_STATUS_FR		0x4000	/* frame received */
+#define SCB_STATUS_CNA		0x2000	/* CU left active state */
+#define SCB_STATUS_RNR		0x1000	/* receiver left ready state */
+#define SCB_STATUS_MDI		0x0800	/* MDI read/write cycle done */
+#define SCB_STATUS_SWI		0x0400	/* software generated interrupt */
+#define SCB_STATUS_FCP		0x0100	/* flow control pause interrupt */
 
-#define SCB_INTACK_MASK 	0xFD00	/* all the above */
+#define SCB_INTACK_MASK		0xFD00	/* all the above */
 
-#define SCB_INTACK_TX 		(SCB_STATUS_CX | SCB_STATUS_CNA)
-#define SCB_INTACK_RX 		(SCB_STATUS_FR | SCB_STATUS_RNR)
+#define SCB_INTACK_TX		(SCB_STATUS_CX | SCB_STATUS_CNA)
+#define SCB_INTACK_RX		(SCB_STATUS_FR | SCB_STATUS_RNR)
 
 	/* System control block commands
 	 */
 /* CU Commands */
-#define CU_NOP          	0x0000
-#define	CU_START        	0x0010
-#define	CU_RESUME       	0x0020
-#define	CU_STATSADDR    	0x0040	/* Load Dump Statistics ctrs addr */
-#define	CU_SHOWSTATS    	0x0050	/* Dump statistics counters. */
-#define	CU_ADDR_LOAD    	0x0060	/* Base address to add to CU commands */
-#define	CU_DUMPSTATS    	0x0070	/* Dump then reset stats counters. */
+#define CU_NOP			0x0000
+#define CU_START		0x0010
+#define CU_RESUME		0x0020
+#define CU_STATSADDR		0x0040	/* Load Dump Statistics ctrs addr */
+#define CU_SHOWSTATS		0x0050	/* Dump statistics counters. */
+#define CU_ADDR_LOAD		0x0060	/* Base address to add to CU commands */
+#define CU_DUMPSTATS		0x0070	/* Dump then reset stats counters. */
 
 /* RUC Commands */
-#define RUC_NOP         	0x0000
-#define	RUC_START       	0x0001
-#define	RUC_RESUME      	0x0002
-#define RUC_ABORT       	0x0004
-#define	RUC_ADDR_LOAD   	0x0006	/* (seems not to clear on acceptance) */
-#define RUC_RESUMENR    	0x0007
-
-#define CU_CMD_MASK     	0x00f0
-#define RU_CMD_MASK     	0x0007
-
-#define SCB_M	        	0x0100	/* 0 = enable interrupt, 1 = disable */
-#define SCB_SWI         	0x0200	/* 1 - cause device to interrupt */
-
-#define CU_STATUS_MASK  	0x00C0
-#define RU_STATUS_MASK  	0x003C
-
-#define RU_STATUS_IDLE  	(0<<2)
-#define RU_STATUS_SUS   	(1<<2)
-#define RU_STATUS_NORES 	(2<<2)
-#define RU_STATUS_READY 	(4<<2)
-#define RU_STATUS_NO_RBDS_SUS   ((1<<2)|(8<<2))
+#define RUC_NOP			0x0000
+#define RUC_START		0x0001
+#define RUC_RESUME		0x0002
+#define RUC_ABORT		0x0004
+#define RUC_ADDR_LOAD		0x0006	/* (seems not to clear on acceptance) */
+#define RUC_RESUMENR		0x0007
+
+#define CU_CMD_MASK		0x00f0
+#define RU_CMD_MASK		0x0007
+
+#define SCB_M			0x0100	/* 0 = enable interrupt, 1 = disable */
+#define SCB_SWI			0x0200	/* 1 - cause device to interrupt */
+
+#define CU_STATUS_MASK		0x00C0
+#define RU_STATUS_MASK		0x003C
+
+#define RU_STATUS_IDLE		(0<<2)
+#define RU_STATUS_SUS		(1<<2)
+#define RU_STATUS_NORES		(2<<2)
+#define RU_STATUS_READY		(4<<2)
+#define RU_STATUS_NO_RBDS_SUS	((1<<2)|(8<<2))
 #define RU_STATUS_NO_RBDS_NORES ((2<<2)|(8<<2))
 #define RU_STATUS_NO_RBDS_READY ((4<<2)|(8<<2))
 
@@ -138,27 +138,27 @@ struct RxFD {
 };
 
 #define RFD_STATUS_C		0x8000	/* completion of received frame */
-#define RFD_STATUS_OK   	0x2000	/* frame received with no errors */
-
-#define RFD_CONTROL_EL   	0x8000	/* 1=last RFD in RFA */
-#define RFD_CONTROL_S    	0x4000	/* 1=suspend RU after receiving frame */
-#define RFD_CONTROL_H    	0x0010	/* 1=RFD is a header RFD */
-#define RFD_CONTROL_SF   	0x0008	/* 0=simplified, 1=flexible mode */
-
-#define RFD_COUNT_MASK     	0x3fff
-#define RFD_COUNT_F        	0x4000
-#define RFD_COUNT_EOF      	0x8000
-
-#define RFD_RX_CRC          	0x0800	/* crc error */
-#define RFD_RX_ALIGNMENT    	0x0400	/* alignment error */
-#define RFD_RX_RESOURCE     	0x0200	/* out of space, no resources */
-#define RFD_RX_DMA_OVER     	0x0100	/* DMA overrun */
-#define RFD_RX_SHORT        	0x0080	/* short frame error */
-#define RFD_RX_LENGTH       	0x0020
-#define RFD_RX_ERROR        	0x0010	/* receive error */
-#define RFD_RX_NO_ADR_MATCH 	0x0004	/* no address match */
-#define RFD_RX_IA_MATCH     	0x0002	/* individual address does not match */
-#define RFD_RX_TCO          	0x0001	/* TCO indication */
+#define RFD_STATUS_OK		0x2000	/* frame received with no errors */
+
+#define RFD_CONTROL_EL		0x8000	/* 1=last RFD in RFA */
+#define RFD_CONTROL_S		0x4000	/* 1=suspend RU after receiving frame */
+#define RFD_CONTROL_H		0x0010	/* 1=RFD is a header RFD */
+#define RFD_CONTROL_SF		0x0008	/* 0=simplified, 1=flexible mode */
+
+#define RFD_COUNT_MASK		0x3fff
+#define RFD_COUNT_F		0x4000
+#define RFD_COUNT_EOF		0x8000
+
+#define RFD_RX_CRC		0x0800	/* crc error */
+#define RFD_RX_ALIGNMENT	0x0400	/* alignment error */
+#define RFD_RX_RESOURCE		0x0200	/* out of space, no resources */
+#define RFD_RX_DMA_OVER		0x0100	/* DMA overrun */
+#define RFD_RX_SHORT		0x0080	/* short frame error */
+#define RFD_RX_LENGTH		0x0020
+#define RFD_RX_ERROR		0x0010	/* receive error */
+#define RFD_RX_NO_ADR_MATCH	0x0004	/* no address match */
+#define RFD_RX_IA_MATCH		0x0002	/* individual address does not match */
+#define RFD_RX_TCO		0x0001	/* TCO indication */
 
 	/* Transmit frame descriptors
 	 */
@@ -176,45 +176,45 @@ struct TxFD {				/* Transmit frame descriptor set. */
 };
 
 #define TxCB_CMD_TRANSMIT	0x0004	/* transmit command */
-#define TxCB_CMD_SF         	0x0008	/* 0=simplified, 1=flexible mode */
-#define TxCB_CMD_NC         	0x0010	/* 0=CRC insert by controller */
-#define TxCB_CMD_I          	0x2000	/* generate interrupt on completion */
-#define TxCB_CMD_S          	0x4000	/* suspend on completion */
-#define TxCB_CMD_EL         	0x8000	/* last command block in CBL */
+#define TxCB_CMD_SF		0x0008	/* 0=simplified, 1=flexible mode */
+#define TxCB_CMD_NC		0x0010	/* 0=CRC insert by controller */
+#define TxCB_CMD_I		0x2000	/* generate interrupt on completion */
+#define TxCB_CMD_S		0x4000	/* suspend on completion */
+#define TxCB_CMD_EL		0x8000	/* last command block in CBL */
 
-#define TxCB_COUNT_MASK     	0x3fff
-#define TxCB_COUNT_EOF      	0x8000
+#define TxCB_COUNT_MASK		0x3fff
+#define TxCB_COUNT_EOF		0x8000
 
 	/* The Speedo3 Rx and Tx frame/buffer descriptors.
 	 */
 struct descriptor {			/* A generic descriptor. */
 	volatile u16 status;
 	volatile u16 command;
-	volatile u32 link;		/* struct descriptor *  */
+	volatile u32 link;		/* struct descriptor *	*/
 
 	unsigned char params[0];
 };
 
-#define CFG_CMD_EL         	0x8000
-#define CFG_CMD_SUSPEND    	0x4000
-#define CFG_CMD_INT        	0x2000
-#define CFG_CMD_IAS        	0x0001	/* individual address setup */
-#define CFG_CMD_CONFIGURE  	0x0002	/* configure */
+#define CFG_CMD_EL		0x8000
+#define CFG_CMD_SUSPEND		0x4000
+#define CFG_CMD_INT		0x2000
+#define CFG_CMD_IAS		0x0001	/* individual address setup */
+#define CFG_CMD_CONFIGURE	0x0002	/* configure */
 
-#define CFG_STATUS_C       	0x8000
-#define CFG_STATUS_OK      	0x2000
+#define CFG_STATUS_C		0x8000
+#define CFG_STATUS_OK		0x2000
 
 	/* Misc.
 	 */
-#define NUM_RX_DESC 		PKTBUFSRX
-#define NUM_TX_DESC 		1	/* Number of TX descriptors   */
+#define NUM_RX_DESC		PKTBUFSRX
+#define NUM_TX_DESC		1	/* Number of TX descriptors   */
 
 #define TOUT_LOOP		1000000
 
 #define ETH_ALEN		6
 
-static struct RxFD rx_ring[NUM_RX_DESC];	/* RX descriptor ring         */
-static struct TxFD tx_ring[NUM_TX_DESC];	/* TX descriptor ring         */
+static struct RxFD rx_ring[NUM_RX_DESC];	/* RX descriptor ring	      */
+static struct TxFD tx_ring[NUM_TX_DESC];	/* TX descriptor ring	      */
 static int rx_next;			/* RX descriptor ring pointer */
 static int tx_next;			/* TX descriptor ring pointer */
 static int tx_threshold;
@@ -277,26 +277,26 @@ static inline int INL (struct eth_device *dev, u_long addr)
 	return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase));
 }
 
-int miiphy_read (unsigned char  addr,
-                unsigned char  reg,
-                unsigned short *value)
+int miiphy_read (unsigned char	addr,
+		unsigned char  reg,
+		unsigned short *value)
 {
 	int cmd = (2 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
 
 	struct eth_device *dev = eth_get_dev ();
 
 	OUTL (dev, cmd, SCBCtrlMDI);
-	
+
 	do {
 		cmd = INL (dev, SCBCtrlMDI);
 	} while (!(cmd & (1 << 28)));
 
 	*value = (unsigned short) (cmd & 0xffff);
-	
+
 	return 0;
 }
 
-int miiphy_write (unsigned char  addr,
+int miiphy_write (unsigned char	 addr,
 		unsigned char  reg,
 		unsigned short value)
 {
@@ -764,12 +764,12 @@ int eepro100_write_eeprom (struct eth_device* dev, int location, int addr_len, u
     OUTW(dev, EE_ENB | dataval, SCBeeprom);
     udelay(1);
 
-    datalong = datalong << 1; /* Adjust significant data bit*/
+    datalong = datalong << 1;	/* Adjust significant data bit*/
     }
 
     /* Finish up command  (toggle CS) */
     OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom);
-    udelay(1);                /* delay for more than 250 ns */
+    udelay(1);			/* delay for more than 250 ns */
     OUTW(dev, EE_ENB, SCBeeprom);
 
     /* Wait for programming ready (D0 = 1) */
diff --git a/include/asm-arm/arch-arm720t/hardware.h b/include/asm-arm/arch-arm720t/hardware.h
index 5064697858e..9404acd4553 100644
--- a/include/asm-arm/arch-arm720t/hardware.h
+++ b/include/asm-arm/arch-arm720t/hardware.h
@@ -32,6 +32,8 @@
 /* include IMPA7 specific hardware file if there was one */
 #elif defined(CONFIG_EP7312)
 /* include EP7312 specific hardware file if there was one */
+#elif defined(CONFIG_ARMADILLO)
+/* include armadillo specific hardware file if there was one */
 #else
 #error No hardware file defined for this configuration
 #endif
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index bca207418cc..6195bca85ba 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -503,7 +503,7 @@
 #endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/
 
 #if CONFIG_ADSTYPE == CFG_8272ADS
-#define CONFIG_HAS_ETH1	
+#define CONFIG_HAS_ETH1
 #endif
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
new file mode 100644
index 00000000000..9a1c5596b7a
--- /dev/null
+++ b/include/configs/armadillo.h
@@ -0,0 +1,149 @@
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Configuation settings for the EP7312 board.
+ *
+ * Modified to work on Armadillo HT1070 ARM720T board
+ * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+/*#define	CONFIG_INIT_CRITICAL*/		/* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM7		1	/* This is a ARM7 CPU	*/
+#define CONFIG_ARMADILLO 	1	/* on an Armadillo Board      */
+#define CONFIG_ARM_THUMB	1	/* this is an ARM720TDMI */
+#undef  CONFIG_ARM7_REVD	 	/* disable ARM720 REV.D Workarounds */
+
+#undef CONFIG_USE_IRQ			/* don't need them anymore */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_CS8900	1	/* we have a CS8900 on-board */
+#define CS8900_BASE		0x20000300 /* armadillo board */
+#define CS8900_BUS16		1
+#undef  CS8900_BUS32
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1		1	/* we use Serial line 1 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE		115200
+
+#define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL) /* | CFG_CMD_JFFS2)*/
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS    	"root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200"
+
+#define CONFIG_BOOTCOMMAND	"bootm 40000 180000"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define	CFG_PROMPT		"ARMADILLO # "	/* Monitor Command Prompt	*/
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0xc0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0xc0800000	/* 4 ... 8 MB in DRAM	*/
+
+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR		0x00040000	/* default load address	for armadillo: kernel img is here*/
+
+#define	CFG_HZ			2000		/* decrementer freq: 2 kHz */
+
+						/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB armadillo SDRAM */
+
+#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE		0x00400000 /* 4 MB */
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x20000)	/* Addr of Environment Sector	*/
+#define CFG_ENV_SIZE		0x20000	/* Total Size of Environment Sector	*/
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#endif	/* __CONFIG_H */
diff --git a/lib_arm/armlinux.c b/lib_arm/armlinux.c
index d15860578a9..ca630b377e7 100644
--- a/lib_arm/armlinux.c
+++ b/lib_arm/armlinux.c
@@ -167,7 +167,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 			do_reset (cmdtp, flag, argc, argv);
 		}
 
-#if defined(CONFIG_B2) || defined(CONFIG_EVB4510)
+#if defined(CONFIG_B2) || defined(CONFIG_EVB4510) || defined(CONFIG_ARMADILLO)
 		/*
 		 *we need to copy the ramdisk to SRAM to let Linux boot
 		 */