Merge branch 'master' of git://git.denx.de/u-boot-usb

13 files changed, 681 insertions, 129 deletions

diff --git a/README b/README
index 57010161f5..276fac9c6e 100644
--- a/README
+++ b/README
@@ -1344,6 +1344,29 @@ The following options need to be configured:
 			CONFIG_SH_MMCIF_CLK
 			Define the clock frequency for MMCIF
 
+- USB Device Firmware Update (DFU) class support:
+		CONFIG_DFU_FUNCTION
+		This enables the USB portion of the DFU USB class
+
+		CONFIG_CMD_DFU
+		This enables the command "dfu" which is used to have
+		U-Boot create a DFU class device via USB.  This command
+		requires that the "dfu_alt_info" environment variable be
+		set and define the alt settings to expose to the host.
+
+		CONFIG_DFU_MMC
+		This enables support for exposing (e)MMC devices via DFU.
+
+		CONFIG_DFU_NAND
+		This enables support for exposing NAND devices via DFU.
+
+		CONFIG_SYS_DFU_MAX_FILE_SIZE
+		When updating files rather than the raw storage device,
+		we use a static buffer to copy the file into and then write
+		the buffer once we've been given the whole file.  Define
+		this to the maximum filesize (in bytes) for the buffer.
+		Default is 4 MiB if undefined.
+
 - Journaling Flash filesystem support:
 		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
 		CONFIG_JFFS2_NAND_DEV
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 284709428d..2db90455f6 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -167,6 +167,11 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
 				}
 			}
 
+			if (mode_idx < 0 || phy_idx < 0) {
+				puts("ERROR: wrong usb mode/phy defined!!\n");
+				return;
+			}
+
 			dr_mode_type = modes[mode_idx];
 			dr_phy_type = phys[phy_idx];
 
diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
index 629ce4a505..84c36bafb4 100644
--- a/board/cm_t35/cm_t35.c
+++ b/board/cm_t35/cm_t35.c
@@ -91,6 +91,7 @@ static int splash_load_from_nand(u32 bmp_load_addr)
 
 	res = nand_read_skip_bad(&nand_info[nand_curr_device],
 			splash_screen_nand_offset, &bmp_header_size,
+			NULL, nand_info[nand_curr_device].size,
 			(u_char *)bmp_load_addr);
 	if (res < 0)
 		return res;
@@ -103,6 +104,7 @@ static int splash_load_from_nand(u32 bmp_load_addr)
 
 	return nand_read_skip_bad(&nand_info[nand_curr_device],
 			splash_screen_nand_offset, &bmp_size,
+			NULL, nand_info[nand_curr_device].size,
 			(u_char *)bmp_load_addr);
 
 splash_address_too_high:
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 32348f3773..e9d3d3c1bf 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -137,7 +137,8 @@ static inline int str2long(const char *p, ulong *num)
 	return *p != '\0' && *endptr == '\0';
 }
 
-static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size)
+static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size,
+		loff_t *maxsize)
 {
 #ifdef CONFIG_CMD_MTDPARTS
 	struct mtd_device *dev;
@@ -160,6 +161,7 @@ static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size)
 
 	*off = part->offset;
 	*size = part->size;
+	*maxsize = part->size;
 	*idx = dev->id->num;
 
 	ret = set_dev(*idx);
@@ -173,10 +175,11 @@ static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size)
 #endif
 }
 
-static int arg_off(const char *arg, int *idx, loff_t *off, loff_t *maxsize)
+static int arg_off(const char *arg, int *idx, loff_t *off, loff_t *size,
+		loff_t *maxsize)
 {
 	if (!str2off(arg, off))
-		return get_part(arg, idx, off, maxsize);
+		return get_part(arg, idx, off, size, maxsize);
 
 	if (*off >= nand_info[*idx].size) {
 		puts("Offset exceeds device limit\n");
@@ -184,36 +187,35 @@ static int arg_off(const char *arg, int *idx, loff_t *off, loff_t *maxsize)
 	}
 
 	*maxsize = nand_info[*idx].size - *off;
+	*size = *maxsize;
 	return 0;
 }
 
 static int arg_off_size(int argc, char *const argv[], int *idx,
-			loff_t *off, loff_t *size)
+			loff_t *off, loff_t *size, loff_t *maxsize)
 {
 	int ret;
-	loff_t maxsize = 0;
 
 	if (argc == 0) {
 		*off = 0;
 		*size = nand_info[*idx].size;
+		*maxsize = *size;
 		goto print;
 	}
 
-	ret = arg_off(argv[0], idx, off, &maxsize);
+	ret = arg_off(argv[0], idx, off, size, maxsize);
 	if (ret)
 		return ret;
 
-	if (argc == 1) {
-		*size = maxsize;
+	if (argc == 1)
 		goto print;
-	}
 
 	if (!str2off(argv[1], size)) {
 		printf("'%s' is not a number\n", argv[1]);
 		return -1;
 	}
 
-	if (*size > maxsize) {
+	if (*size > *maxsize) {
 		puts("Size exceeds partition or device limit\n");
 		return -1;
 	}
@@ -307,7 +309,8 @@ int do_nand_env_oob(cmd_tbl_t *cmdtp, int argc, char *const argv[])
 		if (argc < 3)
 			goto usage;
 
-		if (arg_off(argv[2], &idx, &addr, &maxsize)) {
+		/* We don't care about size, or maxsize. */
+		if (arg_off(argv[2], &idx, &addr, &maxsize, &maxsize)) {
 			puts("Offset or partition name expected\n");
 			return 1;
 		}
@@ -426,7 +429,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int i, ret = 0;
 	ulong addr;
-	loff_t off, size;
+	loff_t off, size, maxsize;
 	char *cmd, *s;
 	nand_info_t *nand;
 #ifdef CONFIG_SYS_NAND_QUIET
@@ -551,7 +554,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 		printf("\nNAND %s: ", cmd);
 		/* skip first two or three arguments, look for offset and size */
-		if (arg_off_size(argc - o, argv + o, &dev, &off, &size) != 0)
+		if (arg_off_size(argc - o, argv + o, &dev, &off, &size,
+				 &maxsize) != 0)
 			return 1;
 
 		nand = &nand_info[dev];
@@ -619,7 +623,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		if (s && !strcmp(s, ".raw")) {
 			raw = 1;
 
-			if (arg_off(argv[3], &dev, &off, &size))
+			if (arg_off(argv[3], &dev, &off, &size, &maxsize))
 				return 1;
 
 			if (argc > 4 && !str2long(argv[4], &pagecount)) {
@@ -635,7 +639,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			rwsize = pagecount * (nand->writesize + nand->oobsize);
 		} else {
 			if (arg_off_size(argc - 3, argv + 3, &dev,
-						&off, &size) != 0)
+						&off, &size, &maxsize) != 0)
 				return 1;
 
 			rwsize = size;
@@ -645,9 +649,11 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		    !strcmp(s, ".e") || !strcmp(s, ".i")) {
 			if (read)
 				ret = nand_read_skip_bad(nand, off, &rwsize,
+							 NULL, maxsize,
 							 (u_char *)addr);
 			else
 				ret = nand_write_skip_bad(nand, off, &rwsize,
+							  NULL, maxsize,
 							  (u_char *)addr, 0);
 #ifdef CONFIG_CMD_NAND_TRIMFFS
 		} else if (!strcmp(s, ".trimffs")) {
@@ -655,8 +661,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 				printf("Unknown nand command suffix '%s'\n", s);
 				return 1;
 			}
-			ret = nand_write_skip_bad(nand, off, &rwsize,
-						(u_char *)addr,
+			ret = nand_write_skip_bad(nand, off, &rwsize, NULL,
+						maxsize, (u_char *)addr,
 						WITH_DROP_FFS);
 #endif
 #ifdef CONFIG_CMD_NAND_YAFFS
@@ -665,9 +671,9 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 				printf("Unknown nand command suffix '%s'.\n", s);
 				return 1;
 			}
-			ret = nand_write_skip_bad(nand, off, &rwsize,
-						(u_char *)addr,
-						WITH_INLINE_OOB);
+			ret = nand_write_skip_bad(nand, off, &rwsize, NULL,
+						maxsize, (u_char *)addr,
+						WITH_YAFFS_OOB);
 #endif
 		} else if (!strcmp(s, ".oob")) {
 			/* out-of-band data */
@@ -775,7 +781,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		if (s && !strcmp(s, ".allexcept"))
 			allexcept = 1;
 
-		if (arg_off_size(argc - 2, argv + 2, &dev, &off, &size) < 0)
+		if (arg_off_size(argc - 2, argv + 2, &dev, &off, &size,
+				 &maxsize) < 0)
 			return 1;
 
 		if (!nand_unlock(&nand_info[dev], off, size, allexcept)) {
@@ -873,7 +880,8 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
 	printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset);
 
 	cnt = nand->writesize;
-	r = nand_read_skip_bad(nand, offset, &cnt, (u_char *) addr);
+	r = nand_read_skip_bad(nand, offset, &cnt, NULL, nand->size,
+			(u_char *)addr);
 	if (r) {
 		puts("** Read error\n");
 		bootstage_error(BOOTSTAGE_ID_NAND_HDR_READ);
@@ -905,7 +913,8 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
 	}
 	bootstage_mark(BOOTSTAGE_ID_NAND_TYPE);
 
-	r = nand_read_skip_bad(nand, offset, &cnt, (u_char *) addr);
+	r = nand_read_skip_bad(nand, offset, &cnt, NULL, nand->size,
+			(u_char *)addr);
 	if (r) {
 		puts("** Read error\n");
 		bootstage_error(BOOTSTAGE_ID_NAND_READ);
diff --git a/common/env_nand.c b/common/env_nand.c
index 5b69889c02..b745822be7 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -281,7 +281,8 @@ int readenv(size_t offset, u_char *buf)
 		} else {
 			char_ptr = &buf[amount_loaded];
 			if (nand_read_skip_bad(&nand_info[0], offset,
-					       &len, char_ptr))
+					       &len, NULL,
+					       nand_info[0].size, char_ptr))
 				return 1;
 
 			offset += blocksize;
diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
index 7b717bce28..153095d71e 100644
--- a/drivers/dfu/Makefile
+++ b/drivers/dfu/Makefile
@@ -27,6 +27,7 @@ LIB	= $(obj)libdfu.o
 
 COBJS-$(CONFIG_DFU_FUNCTION) += dfu.o
 COBJS-$(CONFIG_DFU_MMC) += dfu_mmc.o
+COBJS-$(CONFIG_DFU_NAND) += dfu_nand.o
 
 SRCS    := $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index e8477fb7c7..6af6890d09 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -44,90 +44,232 @@ static int dfu_find_alt_num(const char *s)
 static unsigned char __aligned(CONFIG_SYS_CACHELINE_SIZE)
 				     dfu_buf[DFU_DATA_BUF_SIZE];
 
+static int dfu_write_buffer_drain(struct dfu_entity *dfu)
+{
+	long w_size;
+	int ret;
+
+	/* flush size? */
+	w_size = dfu->i_buf - dfu->i_buf_start;
+	if (w_size == 0)
+		return 0;
+
+	/* update CRC32 */
+	dfu->crc = crc32(dfu->crc, dfu->i_buf_start, w_size);
+
+	ret = dfu->write_medium(dfu, dfu->offset, dfu->i_buf_start, &w_size);
+	if (ret)
+		debug("%s: Write error!\n", __func__);
+
+	/* point back */
+	dfu->i_buf = dfu->i_buf_start;
+
+	/* update offset */
+	dfu->offset += w_size;
+
+	puts("#");
+
+	return ret;
+}
+
 int dfu_write(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
 {
-	static unsigned char *i_buf;
-	static int i_blk_seq_num;
-	long w_size = 0;
 	int ret = 0;
+	int tret;
+
+	debug("%s: name: %s buf: 0x%p size: 0x%x p_num: 0x%x offset: 0x%llx bufoffset: 0x%x\n",
+	      __func__, dfu->name, buf, size, blk_seq_num, dfu->offset,
+	      dfu->i_buf - dfu->i_buf_start);
+
+	if (!dfu->inited) {
+		/* initial state */
+		dfu->crc = 0;
+		dfu->offset = 0;
+		dfu->bad_skip = 0;
+		dfu->i_blk_seq_num = 0;
+		dfu->i_buf_start = dfu_buf;
+		dfu->i_buf_end = dfu_buf + sizeof(dfu_buf);
+		dfu->i_buf = dfu->i_buf_start;
+
+		dfu->inited = 1;
+	}
 
-	debug("%s: name: %s buf: 0x%p size: 0x%x p_num: 0x%x i_buf: 0x%p\n",
-	       __func__, dfu->name, buf, size, blk_seq_num, i_buf);
+	if (dfu->i_blk_seq_num != blk_seq_num) {
+		printf("%s: Wrong sequence number! [%d] [%d]\n",
+		       __func__, dfu->i_blk_seq_num, blk_seq_num);
+		return -1;
+	}
 
-	if (blk_seq_num == 0) {
-		i_buf = dfu_buf;
-		i_blk_seq_num = 0;
+	/* DFU 1.1 standard says:
+	 * The wBlockNum field is a block sequence number. It increments each
+	 * time a block is transferred, wrapping to zero from 65,535. It is used
+	 * to provide useful context to the DFU loader in the device."
+	 *
+	 * This means that it's a 16 bit counter that roll-overs at
+	 * 0xffff -> 0x0000. By having a typical 4K transfer block
+	 * we roll-over at exactly 256MB. Not very fun to debug.
+	 *
+	 * Handling rollover, and having an inited variable,
+	 * makes things work.
+	 */
+
+	/* handle rollover */
+	dfu->i_blk_seq_num = (dfu->i_blk_seq_num + 1) & 0xffff;
+
+	/* flush buffer if overflow */
+	if ((dfu->i_buf + size) > dfu->i_buf_end) {
+		tret = dfu_write_buffer_drain(dfu);
+		if (ret == 0)
+			ret = tret;
 	}
 
-	if (i_blk_seq_num++ != blk_seq_num) {
-		printf("%s: Wrong sequence number! [%d] [%d]\n",
-		       __func__, i_blk_seq_num, blk_seq_num);
+	/* we should be in buffer now (if not then size too large) */
+	if ((dfu->i_buf + size) > dfu->i_buf_end) {
+		printf("%s: Wrong size! [%d] [%d] - %d\n",
+		       __func__, dfu->i_blk_seq_num, blk_seq_num, size);
 		return -1;
 	}
 
-	memcpy(i_buf, buf, size);
-	i_buf += size;
+	memcpy(dfu->i_buf, buf, size);
+	dfu->i_buf += size;
 
+	/* if end or if buffer full flush */
+	if (size == 0 || (dfu->i_buf + size) > dfu->i_buf_end) {
+		tret = dfu_write_buffer_drain(dfu);
+		if (ret == 0)
+			ret = tret;
+	}
+
+	/* end? */
 	if (size == 0) {
-		/* Integrity check (if needed) */
-		debug("%s: %s %d [B] CRC32: 0x%x\n", __func__, dfu->name,
-		       i_buf - dfu_buf, crc32(0, dfu_buf, i_buf - dfu_buf));
+		/* Now try and flush to the medium if needed. */
+		if (dfu->flush_medium)
+			ret = dfu->flush_medium(dfu);
+		printf("\nDFU complete CRC32: 0x%08x\n", dfu->crc);
 
-		w_size = i_buf - dfu_buf;
-		ret = dfu->write_medium(dfu, dfu_buf, &w_size);
-		if (ret)
-			debug("%s: Write error!\n", __func__);
+		/* clear everything */
+		dfu->crc = 0;
+		dfu->offset = 0;
+		dfu->i_blk_seq_num = 0;
+		dfu->i_buf_start = dfu_buf;
+		dfu->i_buf_end = dfu_buf + sizeof(dfu_buf);
+		dfu->i_buf = dfu->i_buf_start;
+
+		dfu->inited = 0;
 
-		i_blk_seq_num = 0;
-		i_buf = NULL;
-		return ret;
 	}
 
-	return ret;
+	return ret = 0 ? size : ret;
+}
+
+static int dfu_read_buffer_fill(struct dfu_entity *dfu, void *buf, int size)
+{
+	long chunk;
+	int ret, readn;
+
+	readn = 0;
+	while (size > 0) {
+		/* get chunk that can be read */
+		chunk = min(size, dfu->b_left);
+		/* consume */
+		if (chunk > 0) {
+			memcpy(buf, dfu->i_buf, chunk);
+			dfu->crc = crc32(dfu->crc, buf, chunk);
+			dfu->i_buf += chunk;
+			dfu->b_left -= chunk;
+			size -= chunk;
+			buf += chunk;
+			readn += chunk;
+		}
+
+		/* all done */
+		if (size > 0) {
+			/* no more to read */
+			if (dfu->r_left == 0)
+				break;
+
+			dfu->i_buf = dfu->i_buf_start;
+			dfu->b_left = dfu->i_buf_end - dfu->i_buf_start;
+
+			/* got to read, but buffer is empty */
+			if (dfu->b_left > dfu->r_left)
+				dfu->b_left = dfu->r_left;
+			ret = dfu->read_medium(dfu, dfu->offset, dfu->i_buf,
+					&dfu->b_left);
+			if (ret != 0) {
+				debug("%s: Read error!\n", __func__);
+				return ret;
+			}
+			dfu->offset += dfu->b_left;
+			dfu->r_left -= dfu->b_left;
+
+			puts("#");
+		}
+	}
+
+	return readn;
 }
 
 int dfu_read(struct dfu_entity *dfu, void *buf, int size, int blk_seq_num)
 {
-	static unsigned char *i_buf;
-	static int i_blk_seq_num;
-	static long r_size;
-	static u32 crc;
 	int ret = 0;
 
 	debug("%s: name: %s buf: 0x%p size: 0x%x p_num: 0x%x i_buf: 0x%p\n",
-	       __func__, dfu->name, buf, size, blk_seq_num, i_buf);
+	       __func__, dfu->name, buf, size, blk_seq_num, dfu->i_buf);
+
+	if (!dfu->inited) {
+		ret = dfu->read_medium(dfu, 0, buf, &dfu->r_left);
+		if (ret != 0) {
+			debug("%s: failed to get r_left\n", __func__);
+			return ret;
+		}
+
+		debug("%s: %s %ld [B]\n", __func__, dfu->name, dfu->r_left);
+
+		dfu->i_blk_seq_num = 0;
+		dfu->crc = 0;
+		dfu->offset = 0;
+		dfu->i_buf_start = dfu_buf;
+		dfu->i_buf_end = dfu_buf + sizeof(dfu_buf);
+		dfu->i_buf = dfu->i_buf_start;
+		dfu->b_left = 0;
 
-	if (blk_seq_num == 0) {
-		i_buf = dfu_buf;
-		ret = dfu->read_medium(dfu, i_buf, &r_size);
-		debug("%s: %s %ld [B]\n", __func__, dfu->name, r_size);
-		i_blk_seq_num = 0;
-		/* Integrity check (if needed) */
-		crc = crc32(0, dfu_buf, r_size);
+		dfu->bad_skip = 0;
+
+		dfu->inited = 1;
 	}
 
-	if (i_blk_seq_num++ != blk_seq_num) {
+	if (dfu->i_blk_seq_num != blk_seq_num) {
 		printf("%s: Wrong sequence number! [%d] [%d]\n",
-		       __func__, i_blk_seq_num, blk_seq_num);
+		       __func__, dfu->i_blk_seq_num, blk_seq_num);
 		return -1;
 	}
+	/* handle rollover */
+	dfu->i_blk_seq_num = (dfu->i_blk_seq_num + 1) & 0xffff;
 
-	if (r_size >= size) {
-		memcpy(buf, i_buf, size);
-		i_buf += size;
-		r_size -= size;
-		return size;
-	} else {
-		memcpy(buf, i_buf, r_size);
-		i_buf += r_size;
-		debug("%s: %s CRC32: 0x%x\n", __func__, dfu->name, crc);
-		puts("UPLOAD ... done\nCtrl+C to exit ...\n");
+	ret = dfu_read_buffer_fill(dfu, buf, size);
+	if (ret < 0) {
+		printf("%s: Failed to fill buffer\n", __func__);
+		return -1;
+	}
+
+	if (ret < size) {
+		debug("%s: %s CRC32: 0x%x\n", __func__, dfu->name, dfu->crc);
+		puts("\nUPLOAD ... done\nCtrl+C to exit ...\n");
 
-		i_buf = NULL;
-		i_blk_seq_num = 0;
-		crc = 0;
-		return r_size;
+		dfu->i_blk_seq_num = 0;
+		dfu->crc = 0;
+		dfu->offset = 0;
+		dfu->i_buf_start = dfu_buf;
+		dfu->i_buf_end = dfu_buf + sizeof(dfu_buf);
+		dfu->i_buf = dfu->i_buf_start;
+		dfu->b_left = 0;
+
+		dfu->bad_skip = 0;
+
+		dfu->inited = 0;
 	}
+
 	return ret;
 }
 
@@ -147,6 +289,9 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt,
 	if (strcmp(interface, "mmc") == 0) {
 		if (dfu_fill_entity_mmc(dfu, s))
 			return -1;
+	} else if (strcmp(interface, "nand") == 0) {
+		if (dfu_fill_entity_nand(dfu, s))
+			return -1;
 	} else {
 		printf("%s: Device %s not (yet) supported!\n",
 		       __func__,  interface);
diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c
index afd350652a..e2f3978400 100644
--- a/drivers/dfu/dfu_mmc.c
+++ b/drivers/dfu/dfu_mmc.c
@@ -22,6 +22,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <errno.h>
+#include <div64.h>
 #include <dfu.h>
 
 enum dfu_mmc_op {
@@ -29,32 +30,51 @@ enum dfu_mmc_op {
 	DFU_OP_WRITE,
 };
 
+static unsigned char __aligned(CONFIG_SYS_CACHELINE_SIZE)
+				dfu_file_buf[CONFIG_SYS_DFU_MAX_FILE_SIZE];
+static long dfu_file_buf_len;
+
 static int mmc_block_op(enum dfu_mmc_op op, struct dfu_entity *dfu,
-			void *buf, long *len)
+			u64 offset, void *buf, long *len)
 {
 	char cmd_buf[DFU_CMD_BUF_SIZE];
+	u32 blk_start, blk_count;
+
+	/*
+	 * We must ensure that we work in lba_blk_size chunks, so ALIGN
+	 * this value.
+	 */
+	*len = ALIGN(*len, dfu->data.mmc.lba_blk_size);
+
+	blk_start = dfu->data.mmc.lba_start +
+			(u32)lldiv(offset, dfu->data.mmc.lba_blk_size);
+	blk_count = *len / dfu->data.mmc.lba_blk_size;
+	if (blk_start + blk_count >
+			dfu->data.mmc.lba_start + dfu->data.mmc.lba_size) {
+		puts("Request would exceed designated area!\n");
+		return -EINVAL;
+	}
 
-	sprintf(cmd_buf, "mmc %s 0x%x %x %x",
+	sprintf(cmd_buf, "mmc %s %p %x %x",
 		op == DFU_OP_READ ? "read" : "write",
-		(unsigned int) buf,
-		dfu->data.mmc.lba_start,
-		dfu->data.mmc.lba_size);
-
-	if (op == DFU_OP_READ)
-		*len = dfu->data.mmc.lba_blk_size * dfu->data.mmc.lba_size;
+		 buf, blk_start, blk_count);
 
 	debug("%s: %s 0x%p\n", __func__, cmd_buf, cmd_buf);
 	return run_command(cmd_buf, 0);
 }
 
-static inline int mmc_block_write(struct dfu_entity *dfu, void *buf, long *len)
+static int mmc_file_buffer(struct dfu_entity *dfu, void *buf, long *len)
 {
-	return mmc_block_op(DFU_OP_WRITE, dfu, buf, len);
-}
+	if (dfu_file_buf_len + *len > CONFIG_SYS_DFU_MAX_FILE_SIZE) {
+		dfu_file_buf_len = 0;
+		return -EINVAL;
+	}
 
-static inline int mmc_block_read(struct dfu_entity *dfu, void *buf, long *len)
-{
-	return mmc_block_op(DFU_OP_READ, dfu, buf, len);
+	/* Add to the current buffer. */
+	memcpy(dfu_file_buf + dfu_file_buf_len, buf, *len);
+	dfu_file_buf_len += *len;
+
+	return 0;
 }
 
 static int mmc_file_op(enum dfu_mmc_op op, struct dfu_entity *dfu,
@@ -66,20 +86,23 @@ static int mmc_file_op(enum dfu_mmc_op op, struct dfu_entity *dfu,
 
 	switch (dfu->layout) {
 	case DFU_FS_FAT:
-		sprintf(cmd_buf, "fat%s mmc %d:%d 0x%x %s %lx",
+		sprintf(cmd_buf, "fat%s mmc %d:%d 0x%x %s",
 			op == DFU_OP_READ ? "load" : "write",
 			dfu->data.mmc.dev, dfu->data.mmc.part,
-			(unsigned int) buf, dfu->name, *len);
+			(unsigned int) buf, dfu->name);
+		if (op == DFU_OP_WRITE)
+			sprintf(cmd_buf + strlen(cmd_buf), " %lx", *len);
 		break;
 	case DFU_FS_EXT4:
-		sprintf(cmd_buf, "ext4%s mmc %d:%d 0x%x /%s %ld",
+		sprintf(cmd_buf, "ext4%s mmc %d:%d 0x%x /%s",
 			op == DFU_OP_READ ? "load" : "write",
 			dfu->data.mmc.dev, dfu->data.mmc.part,
-			(unsigned int) buf, dfu->name, *len);
+			(unsigned int) buf, dfu->name);
 		break;
 	default:
 		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
 		       dfu_get_layout(dfu->layout));
+		return -1;
 	}
 
 	debug("%s: %s 0x%p\n", __func__, cmd_buf, cmd_buf);
@@ -102,27 +125,18 @@ static int mmc_file_op(enum dfu_mmc_op op, struct dfu_entity *dfu,
 	return ret;
 }
 
-static inline int mmc_file_write(struct dfu_entity *dfu, void *buf, long *len)
-{
-	return mmc_file_op(DFU_OP_WRITE, dfu, buf, len);
-}
-
-static inline int mmc_file_read(struct dfu_entity *dfu, void *buf, long *len)
-{
-	return mmc_file_op(DFU_OP_READ, dfu, buf, len);
-}
-
-int dfu_write_medium_mmc(struct dfu_entity *dfu, void *buf, long *len)
+int dfu_write_medium_mmc(struct dfu_entity *dfu,
+		u64 offset, void *buf, long *len)
 {
 	int ret = -1;
 
 	switch (dfu->layout) {
 	case DFU_RAW_ADDR:
-		ret = mmc_block_write(dfu, buf, len);
+		ret = mmc_block_op(DFU_OP_WRITE, dfu, offset, buf, len);
 		break;
 	case DFU_FS_FAT:
 	case DFU_FS_EXT4:
-		ret = mmc_file_write(dfu, buf, len);
+		ret = mmc_file_buffer(dfu, buf, len);
 		break;
 	default:
 		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
@@ -132,17 +146,34 @@ int dfu_write_medium_mmc(struct dfu_entity *dfu, void *buf, long *len)
 	return ret;
 }
 
-int dfu_read_medium_mmc(struct dfu_entity *dfu, void *buf, long *len)
+int dfu_flush_medium_mmc(struct dfu_entity *dfu)
+{
+	int ret = 0;
+
+	if (dfu->layout != DFU_RAW_ADDR) {
+		/* Do stuff here. */
+		ret = mmc_file_op(DFU_OP_WRITE, dfu, &dfu_file_buf,
+				&dfu_file_buf_len);
+
+		/* Now that we're done */
+		dfu_file_buf_len = 0;
+	}
+
+	return ret;
+}
+
+int dfu_read_medium_mmc(struct dfu_entity *dfu, u64 offset, void *buf,
+		long *len)
 {
 	int ret = -1;
 
 	switch (dfu->layout) {
 	case DFU_RAW_ADDR:
-		ret = mmc_block_read(dfu, buf, len);
+		ret = mmc_block_op(DFU_OP_READ, dfu, offset, buf, len);
 		break;
 	case DFU_FS_FAT:
 	case DFU_FS_EXT4:
-		ret = mmc_file_read(dfu, buf, len);
+		ret = mmc_file_op(DFU_OP_READ, dfu, buf, len);
 		break;
 	default:
 		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
@@ -181,14 +212,15 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s)
 
 		mmc = find_mmc_device(dev);
 		if (mmc == NULL || mmc_init(mmc)) {
-			printf("%s: could not find mmc device #%d!\n", __func__, dev);
+			printf("%s: could not find mmc device #%d!\n",
+			       __func__, dev);
 			return -ENODEV;
 		}
 
 		blk_dev = &mmc->block_dev;
 		if (get_partition_info(blk_dev, part, &partinfo) != 0) {
 			printf("%s: could not find partition #%d on mmc device #%d!\n",
-					__func__, part, dev);
+			       __func__, part, dev);
 			return -ENODEV;
 		}
 
@@ -208,6 +240,10 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s)
 
 	dfu->read_medium = dfu_read_medium_mmc;
 	dfu->write_medium = dfu_write_medium_mmc;
+	dfu->flush_medium = dfu_flush_medium_mmc;
+
+	/* initial state */
+	dfu->inited = 0;
 
 	return 0;
 }
diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c
new file mode 100644
index 0000000000..7dc89b2f2b
--- /dev/null
+++ b/drivers/dfu/dfu_nand.c
@@ -0,0 +1,187 @@
+/*
+ * dfu_nand.c -- DFU for NAND routines.
+ *
+ * Copyright (C) 2012-2013 Texas Instruments, Inc.
+ *
+ * Based on dfu_mmc.c which is:
+ * Copyright (C) 2012 Samsung Electronics
+ * author: Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <div64.h>
+#include <dfu.h>
+#include <linux/mtd/mtd.h>
+#include <jffs2/load_kernel.h>
+#include <nand.h>
+
+enum dfu_nand_op {
+	DFU_OP_READ = 1,
+	DFU_OP_WRITE,
+};
+
+static int nand_block_op(enum dfu_nand_op op, struct dfu_entity *dfu,
+			u64 offset, void *buf, long *len)
+{
+	loff_t start, lim;
+	size_t count, actual;
+	int ret;
+	nand_info_t *nand;
+
+	/* if buf == NULL return total size of the area */
+	if (buf == NULL) {
+		*len = dfu->data.nand.size;
+		return 0;
+	}
+
+	start = dfu->data.nand.start + offset + dfu->bad_skip;
+	lim = dfu->data.nand.start + dfu->data.nand.size - start;
+	count = *len;
+
+	if (nand_curr_device < 0 ||
+	    nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
+	    !nand_info[nand_curr_device].name) {
+		printf("%s: invalid nand device\n", __func__);
+		return -1;
+	}
+
+	nand = &nand_info[nand_curr_device];
+
+	if (op == DFU_OP_READ)
+		ret = nand_read_skip_bad(nand, start, &count, &actual,
+				lim, buf);
+	else
+		ret = nand_write_skip_bad(nand, start, &count, &actual,
+				lim, buf, 0);
+
+	if (ret != 0) {
+		printf("%s: nand_%s_skip_bad call failed at %llx!\n",
+		       __func__, op == DFU_OP_READ ? "read" : "write",
+		       start);
+		return ret;
+	}
+
+	/*
+	 * Find out where we stopped writing data.  This can be deeper into
+	 * the NAND than we expected due to having to skip bad blocks.  So
+	 * we must take this into account for the next write, if any.
+	 */
+	if (actual > count)
+		dfu->bad_skip += actual - count;
+
+	return ret;
+}
+
+static inline int nand_block_write(struct dfu_entity *dfu,
+		u64 offset, void *buf, long *len)
+{
+	return nand_block_op(DFU_OP_WRITE, dfu, offset, buf, len);
+}
+
+static inline int nand_block_read(struct dfu_entity *dfu,
+		u64 offset, void *buf, long *len)
+{
+	return nand_block_op(DFU_OP_READ, dfu, offset, buf, len);
+}
+
+static int dfu_write_medium_nand(struct dfu_entity *dfu,
+		u64 offset, void *buf, long *len)
+{
+	int ret = -1;
+
+	switch (dfu->layout) {
+	case DFU_RAW_ADDR:
+		ret = nand_block_write(dfu, offset, buf, len);
+		break;
+	default:
+		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+		       dfu_get_layout(dfu->layout));
+	}
+
+	return ret;
+}
+
+static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf,
+		long *len)
+{
+	int ret = -1;
+
+	switch (dfu->layout) {
+	case DFU_RAW_ADDR:
+		ret = nand_block_read(dfu, offset, buf, len);
+		break;
+	default:
+		printf("%s: Layout (%s) not (yet) supported!\n", __func__,
+		       dfu_get_layout(dfu->layout));
+	}
+
+	return ret;
+}
+
+int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s)
+{
+	char *st;
+	int ret, dev, part;
+
+	dfu->dev_type = DFU_DEV_NAND;
+	st = strsep(&s, " ");
+	if (!strcmp(st, "raw")) {
+		dfu->layout = DFU_RAW_ADDR;
+		dfu->data.nand.start = simple_strtoul(s, &s, 16);
+		s++;
+		dfu->data.nand.size = simple_strtoul(s, &s, 16);
+	} else if (!strcmp(st, "part")) {
+		char mtd_id[32];
+		struct mtd_device *mtd_dev;
+		u8 part_num;
+		struct part_info *pi;
+
+		dfu->layout = DFU_RAW_ADDR;
+
+		dev = simple_strtoul(s, &s, 10);
+		s++;
+		part = simple_strtoul(s, &s, 10);
+
+		sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1);
+		printf("using id '%s'\n", mtd_id);
+
+		mtdparts_init();
+
+		ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi);
+		if (ret != 0) {
+			printf("Could not locate '%s'\n", mtd_id);
+			return -1;
+		}
+
+		dfu->data.nand.start = pi->offset;
+		dfu->data.nand.size = pi->size;
+
+	} else {
+		printf("%s: Memory layout (%s) not supported!\n", __func__, st);
+		return -1;
+	}
+
+	dfu->read_medium = dfu_read_medium_nand;
+	dfu->write_medium = dfu_write_medium_nand;
+
+	/* initial state */
+	dfu->inited = 0;
+
+	return 0;
+}
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index ff2d348307..4727f9c989 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -416,11 +416,13 @@ int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length,
  * @param nand NAND device
  * @param offset offset in flash
  * @param length image length
+ * @param used length of flash needed for the requested length
  * @return 0 if the image fits and there are no bad blocks
  *         1 if the image fits, but there are bad blocks
  *        -1 if the image does not fit
  */
-static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length)
+static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length,
+		size_t *used)
 {
 	size_t len_excl_bad = 0;
 	int ret = 0;
@@ -442,8 +444,13 @@ static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length)
 			ret = 1;
 
 		offset += block_len;
+		*used += block_len;
 	}
 
+	/* If the length is not a multiple of block_len, adjust. */
+	if (len_excl_bad > length)
+		*used -= (len_excl_bad - length);
+
 	return ret;
 }
 
@@ -476,23 +483,36 @@ static size_t drop_ffs(const nand_info_t *nand, const u_char *buf,
  * Write image to NAND flash.
  * Blocks that are marked bad are skipped and the is written to the next
  * block instead as long as the image is short enough to fit even after
- * skipping the bad blocks.
+ * skipping the bad blocks.  Due to bad blocks we may not be able to
+ * perform the requested write.  In the case where the write would
+ * extend beyond the end of the NAND device, both length and actual (if
+ * not NULL) are set to 0.  In the case where the write would extend
+ * beyond the limit we are passed, length is set to 0 and actual is set
+ * to the required length.
  *
  * @param nand  	NAND device
  * @param offset	offset in flash
  * @param length	buffer length
+ * @param actual	set to size required to write length worth of
+ *			buffer or 0 on error, if not NULL
+ * @param lim		maximum size that actual may be in order to not
+ *			exceed the buffer
  * @param buffer        buffer to read from
  * @param flags		flags modifying the behaviour of the write to NAND
  * @return		0 in case of success
  */
 int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
-			u_char *buffer, int flags)
+		size_t *actual, loff_t lim, u_char *buffer, int flags)
 {
 	int rval = 0, blocksize;
 	size_t left_to_write = *length;
+	size_t used_for_write = 0;
 	u_char *p_buffer = buffer;
 	int need_skip;
 
+	if (actual)
+		*actual = 0;
+
 #ifdef CONFIG_CMD_NAND_YAFFS
 	if (flags & WITH_YAFFS_OOB) {
 		if (flags & ~WITH_YAFFS_OOB)
@@ -529,13 +549,23 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		return -EINVAL;
 	}
 
-	need_skip = check_skip_len(nand, offset, *length);
+	need_skip = check_skip_len(nand, offset, *length, &used_for_write);
+
+	if (actual)
+		*actual = used_for_write;
+
 	if (need_skip < 0) {
 		printf("Attempt to write outside the flash area\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
+	if (used_for_write > lim) {
+		puts("Size of write exceeds partition or device limit\n");
+		*length = 0;
+		return -EFBIG;
+	}
+
 	if (!need_skip && !(flags & WITH_DROP_FFS)) {
 		rval = nand_write(nand, offset, length, buffer);
 		if (rval == 0)
@@ -626,36 +656,58 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
  *
  * Read image from NAND flash.
  * Blocks that are marked bad are skipped and the next block is read
- * instead as long as the image is short enough to fit even after skipping the
- * bad blocks.
+ * instead as long as the image is short enough to fit even after
+ * skipping the bad blocks.  Due to bad blocks we may not be able to
+ * perform the requested read.  In the case where the read would extend
+ * beyond the end of the NAND device, both length and actual (if not
+ * NULL) are set to 0.  In the case where the read would extend beyond
+ * the limit we are passed, length is set to 0 and actual is set to the
+ * required length.
  *
  * @param nand NAND device
  * @param offset offset in flash
  * @param length buffer length, on return holds number of read bytes
+ * @param actual set to size required to read length worth of buffer or 0
+ * on error, if not NULL
+ * @param lim maximum size that actual may be in order to not exceed the
+ * buffer
  * @param buffer buffer to write to
  * @return 0 in case of success
  */
 int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
-		       u_char *buffer)
+		size_t *actual, loff_t lim, u_char *buffer)
 {
 	int rval;
 	size_t left_to_read = *length;
+	size_t used_for_read = 0;
 	u_char *p_buffer = buffer;
 	int need_skip;
 
 	if ((offset & (nand->writesize - 1)) != 0) {
 		printf("Attempt to read non page-aligned data\n");
 		*length = 0;
+		if (actual)
+			*actual = 0;
 		return -EINVAL;
 	}
 
-	need_skip = check_skip_len(nand, offset, *length);
+	need_skip = check_skip_len(nand, offset, *length, &used_for_read);
+
+	if (actual)
+		*actual = used_for_read;
+
 	if (need_skip < 0) {
 		printf("Attempt to read outside the flash area\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
+	if (used_for_read > lim) {
+		puts("Size of read exceeds partition or device limit\n");
+		*length = 0;
+		return -EFBIG;
+	}
+
 	if (!need_skip) {
 		rval = nand_read(nand, offset, length, buffer);
 		if (!rval || rval == -EUCLEAN)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index b7c443c573..f7f6d25336 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -39,6 +39,8 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
+#define CONFIG_SYS_CACHELINE_SIZE       64
+
 /* commands to include */
 #include <config_cmd_default.h>
 
@@ -60,6 +62,11 @@
 	"fdtfile=\0" \
 	"console=ttyO0,115200n8\0" \
 	"optargs=\0" \
+	"mtdids=" MTDIDS_DEFAULT "\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"dfu_alt_info_mmc=" DFU_ALT_INFO_MMC "\0" \
+	"dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
+	"dfu_alt_info_nand=" DFU_ALT_INFO_NAND "\0" \
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 ro\0" \
 	"mmcrootfstype=ext4 rootwait\0" \
@@ -167,8 +174,8 @@
 
 #define CONFIG_CMD_ECHO
 
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS		16
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS		64
 
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE		512
@@ -197,6 +204,7 @@
 #define CONFIG_CMD_MMC
 #define CONFIG_DOS_PARTITION
 #define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_FS_GENERIC
@@ -209,6 +217,38 @@
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED		(24000000)
 
+/* USB Composite download gadget - g_dnl */
+#define CONFIG_USB_GADGET
+#define CONFIG_USBDOWNLOAD_GADGET
+
+/* USB TI's IDs */
+#define CONFIG_USBD_HS
+#define CONFIG_G_DNL_VENDOR_NUM 0x0403
+#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
+#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
+
+/* USB Device Firmware Update support */
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_MMC
+#define CONFIG_DFU_NAND
+#define CONFIG_CMD_DFU
+#define DFU_ALT_INFO_MMC \
+	"boot part 0 1;" \
+	"rootfs part 0 2;" \
+	"MLO fat 0 1;" \
+	"MLO.raw mmc 100 100;" \
+	"u-boot.img.raw mmc 300 3C0;" \
+	"u-boot.img fat 0 1;" \
+	"uEnv.txt fat 0 1"
+#define DFU_ALT_INFO_NAND \
+	"SPL part 0 1;" \
+	"SPL.backup1 part 0 2;" \
+	"SPL.backup2 part 0 3;" \
+	"SPL.backup3 part 0 4;" \
+	"u-boot part 0 5;" \
+	"kernel part 0 7;" \
+	"rootfs part 0 8"
+
  /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1		/*  1 bank of DRAM */
 #define PHYS_DRAM_1			0x80000000	/* DRAM Bank #1 */
@@ -353,6 +393,7 @@
 #define CONFIG_MUSB_GADGET
 #define CONFIG_MUSB_PIO_ONLY
 #define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
@@ -424,6 +465,13 @@
 /* NAND support */
 #ifdef CONFIG_NAND
 #define CONFIG_CMD_NAND
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:128k(SPL)," \
+					"128k(SPL.backup1)," \
+					"128k(SPL.backup2)," \
+					"128k(SPL.backup3),1920k(u-boot)," \
+					"128k(u-boot-env),5m(kernel),-(rootfs)"
 #define CONFIG_NAND_OMAP_GPMC
 #define GPMC_NAND_ECC_LP_x16_LAYOUT	1
 #define CONFIG_SYS_NAND_BASE		(0x08000000)	/* physical address */
diff --git a/include/dfu.h b/include/dfu.h
index 784d8a442c..a107f4b13e 100644
--- a/include/dfu.h
+++ b/include/dfu.h
@@ -52,14 +52,26 @@ struct mmc_internal_data {
 	unsigned int part;
 };
 
+struct nand_internal_data {
+	/* RAW programming */
+	u64 start;
+	u64 size;
+
+	unsigned int dev;
+	unsigned int part;
+};
+
 static inline unsigned int get_mmc_blk_size(int dev)
 {
 	return find_mmc_device(dev)->read_bl_len;
 }
 
-#define DFU_NAME_SIZE 32
-#define DFU_CMD_BUF_SIZE 128
-#define DFU_DATA_BUF_SIZE (1024*1024*8) /* 8 MiB */
+#define DFU_NAME_SIZE			32
+#define DFU_CMD_BUF_SIZE		128
+#define DFU_DATA_BUF_SIZE		(1024*1024*8)	/* 8 MiB */
+#ifndef CONFIG_SYS_DFU_MAX_FILE_SIZE
+#define CONFIG_SYS_DFU_MAX_FILE_SIZE	(4 << 20)	/* 4 MiB */
+#endif
 
 struct dfu_entity {
 	char			name[DFU_NAME_SIZE];
@@ -71,12 +83,32 @@ struct dfu_entity {
 
 	union {
 		struct mmc_internal_data mmc;
+		struct nand_internal_data nand;
 	} data;
 
-	int (*read_medium)(struct dfu_entity *dfu, void *buf, long *len);
-	int (*write_medium)(struct dfu_entity *dfu, void *buf, long *len);
+	int (*read_medium)(struct dfu_entity *dfu,
+			u64 offset, void *buf, long *len);
+
+	int (*write_medium)(struct dfu_entity *dfu,
+			u64 offset, void *buf, long *len);
+
+	int (*flush_medium)(struct dfu_entity *dfu);
 
 	struct list_head list;
+
+	/* on the fly state */
+	u32 crc;
+	u64 offset;
+	int i_blk_seq_num;
+	u8 *i_buf;
+	u8 *i_buf_start;
+	u8 *i_buf_end;
+	long r_left;
+	long b_left;
+
+	u32 bad_skip;	/* for nand use */
+
+	unsigned int inited:1;
 };
 
 int dfu_config_entities(char *s, char *interface, int num);
@@ -100,4 +132,15 @@ static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s)
 	return -1;
 }
 #endif
+
+#ifdef CONFIG_DFU_NAND
+extern int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s);
+#else
+static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s)
+{
+	puts("NAND support not available!\n");
+	return -1;
+}
+#endif
+
 #endif /* __DFU_ENTITY_H_ */
diff --git a/include/nand.h b/include/nand.h
index dded4e27f0..f0f3bf94b5 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -129,7 +129,7 @@ struct nand_erase_options {
 typedef struct nand_erase_options nand_erase_options_t;
 
 int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
-		       u_char *buffer);
+		       size_t *actual, loff_t lim, u_char *buffer);
 
 #define WITH_YAFFS_OOB	(1 << 0) /* whether write with yaffs format. This flag
 				  * is a 'mode' meaning it cannot be mixed with
@@ -137,7 +137,7 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 #define WITH_DROP_FFS	(1 << 1) /* drop trailing all-0xff pages */
 
 int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
-			u_char *buffer, int flags);
+			size_t *actual, loff_t lim, u_char *buffer, int flags);
 int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts);
 int nand_torture(nand_info_t *nand, loff_t offset);