summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSimon Glass <sjg@chromium.org>2013-03-14 07:20:12 +0000
committerTom Rini <trini@ti.com>2013-03-15 16:14:00 -0400
commitc2240d4dbef98f0bc5f5e99324d1eef8d6e9acdf (patch)
tree67545e93ce9a058453de6e74c7cdde4a0f5f7e11
parente4fef6cfcc84d35df4db0b80c273de61dba9f0c1 (diff)
Adjust board_r.c for ppc
This adds ppc features to the generic post-relocation board init. Signed-off-by: Simon Glass <sjg@chromium.org>
-rw-r--r--common/board_r.c480
-rw-r--r--include/common.h1
-rw-r--r--include/ide.h7
3 files changed, 485 insertions, 3 deletions
diff --git a/common/board_r.c b/common/board_r.c
index 06b0df0003d..c57ae5cace1 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -27,25 +27,81 @@
*/
#include <common.h>
+/* TODO: can we just include all these headers whether needed or not? */
+#if defined(CONFIG_CMD_BEDBUG)
+#include <bedbug/type.h>
+#endif
#ifdef CONFIG_HAS_DATAFLASH
#include <dataflash.h>
#endif
#include <environment.h>
#include <fdtdec.h>
+#if defined(CONFIG_CMD_IDE)
+#include <ide.h>
+#endif
#include <initcall.h>
+#ifdef CONFIG_PS2KBD
+#include <keyboard.h>
+#endif
+#if defined(CONFIG_CMD_KGDB)
+#include <kgdb.h>
+#endif
#include <logbuff.h>
#include <malloc.h>
+#ifdef CONFIG_BITBANGMII
+#include <miiphy.h>
+#endif
#include <mmc.h>
#include <nand.h>
#include <onenand_uboot.h>
+#include <scsi.h>
#include <serial.h>
+#include <spi.h>
#include <stdio_dev.h>
+#include <watchdog.h>
+#ifdef CONFIG_ADDR_MAP
+#include <asm/mmu.h>
+#endif
#include <asm/sections.h>
+#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
ulong monitor_flash_len;
+int __board_flash_wp_on(void)
+{
+ /*
+ * Most flashes can't be detected when write protection is enabled,
+ * so provide a way to let U-Boot gracefully ignore write protected
+ * devices.
+ */
+ return 0;
+}
+
+int board_flash_wp_on(void)
+ __attribute__ ((weak, alias("__board_flash_wp_on")));
+
+void __cpu_secondary_init_r(void)
+{
+}
+
+void cpu_secondary_init_r(void)
+ __attribute__ ((weak, alias("__cpu_secondary_init_r")));
+
+static int initr_secondary_cpu(void)
+{
+ /*
+ * after non-volatile devices & environment is setup and cpu code have
+ * another round to deal with any initialization that might require
+ * full access to the environment or loading of some image (firmware)
+ * from a non-volatile device
+ */
+ /* TODO: maybe define this for all archs? */
+ cpu_secondary_init_r();
+
+ return 0;
+}
static int initr_reloc(void)
{
@@ -68,6 +124,11 @@ static int initr_caches(void)
}
#endif
+__weak int fixup_cpu(void)
+{
+ return 0;
+}
+
static int initr_reloc_global_data(void)
{
#ifdef CONFIG_SYS_SYM_OFFSETS
@@ -75,6 +136,31 @@ static int initr_reloc_global_data(void)
#else
monitor_flash_len = (ulong)&__init_end - gd->dest_addr;
#endif
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+ /*
+ * The gd->cpu pointer is set to an address in flash before relocation.
+ * We need to update it to point to the same CPU entry in RAM.
+ * TODO: why not just add gd->reloc_ofs?
+ */
+ gd->arch.cpu += gd->dest_addr - CONFIG_SYS_MONITOR_BASE;
+
+ /*
+ * If we didn't know the cpu mask & # cores, we can save them of
+ * now rather than 'computing' them constantly
+ */
+ fixup_cpu();
+#endif
+#ifdef CONFIG_SYS_EXTRA_ENV_RELOC
+ /*
+ * Some systems need to relocate the env_addr pointer early because the
+ * location it points to will get invalidated before env_relocate is
+ * called. One example is on systems that might use a L2 or L3 cache
+ * in SRAM mode and initialize that cache from SRAM mode back to being
+ * a cache in cpu_init_r.
+ */
+ gd->env_addr += gd->dest_addr - CONFIG_SYS_MONITOR_BASE;
+#endif
+ return 0;
}
static int initr_serial(void)
@@ -83,6 +169,27 @@ static int initr_serial(void)
return 0;
}
+#ifdef CONFIG_PPC
+static int initr_trap(void)
+{
+ /*
+ * Setup trap handlers
+ */
+ trap_init(gd->dest_addr);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ADDR_MAP
+static int initr_addr_map(void)
+{
+ init_addr_map();
+
+ return 0;
+}
+#endif
+
#ifdef CONFIG_LOGBUFFER
unsigned long logbuffer_base(void)
{
@@ -104,6 +211,50 @@ static int initr_post_backlog(void)
}
#endif
+#ifdef CONFIG_SYS_DELAYED_ICACHE
+static int initr_icache_enable(void)
+{
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
+static int initr_unlock_ram_in_cache(void)
+{
+ unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PCI
+static int initr_pci(void)
+{
+ pci_init();
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_WINBOND_83C553
+static int initr_w83c553f(void)
+{
+ /*
+ * Initialise the ISA bridge
+ */
+ initialise_w83c553f();
+ return 0;
+}
+#endif
+
+static int initr_barrier(void)
+{
+#ifdef CONFIG_PPC
+ /* TODO: Can we not use dmb() macros for this? */
+ asm("sync ; isync");
+#endif
+ return 0;
+}
+
static int initr_malloc(void)
{
ulong malloc_start;
@@ -128,13 +279,26 @@ static int initr_announce(void)
#if !defined(CONFIG_SYS_NO_FLASH)
static int initr_flash(void)
{
- ulong flash_size;
+ ulong flash_size = 0;
+ bd_t *bd = gd->bd;
+ int ok;
puts("Flash: ");
- flash_size = flash_init();
- if (flash_size <= 0) {
+ if (board_flash_wp_on()) {
+ printf("Uninitialized - Write Protect On\n");
+ /* Since WP is on, we can't find real size. Set to 0 */
+ ok = 1;
+ } else {
+ flash_size = flash_init();
+ ok = flash_size > 0;
+ }
+ if (!ok) {
puts("*** failed ***\n");
+#ifdef CONFIG_PPC
+ /* Why does PPC do this? */
+ hang();
+#endif
return -1;
}
print_size(flash_size, "");
@@ -152,6 +316,39 @@ static int initr_flash(void)
#endif /* CONFIG_SYS_FLASH_CHECKSUM */
putc('\n');
+ /* update start of FLASH memory */
+#ifdef CONFIG_SYS_FLASH_BASE
+ bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+#endif
+ /* size of FLASH memory (final value) */
+ bd->bi_flashsize = flash_size;
+
+#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
+ /* Make a update of the Memctrl. */
+ update_flash_size(flash_size);
+#endif
+
+
+#if defined(CONFIG_OXC) || defined(CONFIG_RMU)
+ /* flash mapped at end of memory map */
+ bd->bi_flashoffset = CONFIG_SYS_TEXT_BASE + flash_size;
+#elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
+ bd->bi_flashoffset = monitor_flash_len; /* reserved area for monitor */
+#endif
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PPC
+static int initr_spi(void)
+{
+ /* PPC does this here */
+#ifdef CONFIG_SPI
+#if !defined(CONFIG_ENV_IS_IN_EEPROM)
+ spi_init_f();
+#endif
+ spi_init_r();
+#endif
return 0;
}
#endif
@@ -226,8 +423,55 @@ static int initr_env(void)
/* Initialize from environment */
load_addr = getenv_ulong("loadaddr", 16, load_addr);
+#if defined(CONFIG_SYS_EXTBDINFO)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+#if defined(CONFIG_I2CFAST)
+ /*
+ * set bi_iic_fast for linux taking environment variable
+ * "i2cfast" into account
+ */
+ {
+ char *s = getenv("i2cfast");
+
+ if (s && ((*s == 'y') || (*s == 'Y'))) {
+ gd->bd->bi_iic_fast[0] = 1;
+ gd->bd->bi_iic_fast[1] = 1;
+ }
+ }
+#endif /* CONFIG_I2CFAST */
+#endif /* CONFIG_405GP, CONFIG_405EP */
+#endif /* CONFIG_SYS_EXTBDINFO */
+ return 0;
+}
+
+#ifdef CONFIG_HERMES
+static int initr_hermes(void)
+{
+ if ((gd->board_type >> 16) == 2)
+ gd->bd->bi_ethspeed = gd->board_type & 0xFFFF;
+ else
+ gd->bd->bi_ethspeed = 0xFFFF;
+ return 0;
+}
+
+static int initr_hermes_start(void)
+{
+ if (gd->bd->bi_ethspeed != 0xFFFF)
+ hermes_start_lxt980((int) gd->bd->bi_ethspeed);
return 0;
}
+#endif
+
+#ifdef CONFIG_SC3
+/* TODO: with new initcalls, move this into the driver */
+extern void sc3_read_eeprom(void);
+
+static int initr_sc3_read_eeprom(void)
+{
+ sc3_read_eeprom();
+ return 0;
+}
+#endif
static int initr_jumptable(void)
{
@@ -269,11 +513,68 @@ static int initr_enable_interrupts(void)
#ifdef CONFIG_CMD_NET
static int initr_ethaddr(void)
{
+ bd_t *bd = gd->bd;
+
+ /* kept around for legacy kernels only ... ignore the next section */
+ eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
+#ifdef CONFIG_HAS_ETH1
+ eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr);
+#endif
+#ifdef CONFIG_HAS_ETH2
+ eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr);
+#endif
+#ifdef CONFIG_HAS_ETH3
+ eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr);
+#endif
+#ifdef CONFIG_HAS_ETH4
+ eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr);
+#endif
+#ifdef CONFIG_HAS_ETH5
+ eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr);
+#endif
+ return 0;
+}
+#endif /* CONFIG_CMD_NET */
+
+#ifdef CONFIG_CMD_KGDB
+static int initr_kgdb(void)
+{
+ puts("KGDB: ");
+ kgdb_init();
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+static int initr_status_led(void)
+{
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
+
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_CMD_SCSI)
+static int initr_scsi(void)
+{
+ /* Not supported properly on ARM yet */
+#ifndef CONFIG_ARM
+ puts("SCSI: ");
+ scsi_init();
+#endif
return 0;
}
#endif /* CONFIG_CMD_NET */
+#if defined(CONFIG_CMD_DOC)
+static int initr_doc(void)
+{
+ puts("DOC: ");
+ doc_init();
+}
+#endif
+
#ifdef CONFIG_BITBANGMII
static int initr_bbmii(void)
{
@@ -303,6 +604,33 @@ static int initr_post(void)
}
#endif
+#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
+static int initr_pcmcia(void)
+{
+ puts("PCMCIA:");
+ pcmcia_init();
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_CMD_IDE)
+static int initr_ide(void)
+{
+#ifdef CONFIG_IDE_8xx_PCCARD
+ puts("PCMCIA:");
+#else
+ puts("IDE: ");
+#endif
+#if defined(CONFIG_START_IDE)
+ if (board_start_ide())
+ ide_init();
+#else
+ ide_init();
+#endif
+ return 0;
+}
+#endif
+
#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
/*
* Export available size of memory for Linux, taking into account the
@@ -322,6 +650,37 @@ int initr_mem(void)
# endif
sprintf(memsz, "%ldk", (gd->ram_size / 1024) - pram);
setenv("mem", memsz);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_CMD_BEDBUG
+static int initr_bedbug(void)
+{
+ bedbug_init();
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PS2KBD
+static int initr_kbd(void)
+{
+ puts("PS/2: ");
+ kbd_init();
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_MODEM_SUPPORT
+static int initr_modem(void)
+{
+ /* TODO: with new initcalls, move this into the driver */
+ extern int do_mdm_init;
+
+ do_mdm_init = gd->do_mdm_init;
+ return 0;
}
#endif
@@ -339,22 +698,63 @@ static int run_main_loop(void)
*
* We also hope to remove most of the driver-related init and do it if/when
* the driver is later used.
+ *
+ * TODO: perhaps reset the watchdog in the initcall function after each call?
*/
init_fnc_t init_sequence_r[] = {
initr_reloc,
+ /* TODO: could x86/PPC have this also perhaps? */
#ifdef CONFIG_ARM
initr_caches,
board_init, /* Setup chipselects */
#endif
+ /*
+ * TODO: printing of the clock inforamtion of the board is now
+ * implemented as part of bdinfo command. Currently only support for
+ * davinci SOC's is added. Remove this check once all the board
+ * implement this.
+ */
+#ifdef CONFIG_CLOCKS
+ set_cpu_clk_info, /* Setup clock information */
+#endif
initr_reloc_global_data,
initr_serial,
initr_announce,
+ INIT_FUNC_WATCHDOG_RESET
+#ifdef CONFIG_PPC
+ initr_trap,
+#endif
+#ifdef CONFIG_ADDR_MAP
+ initr_addr_map,
+#endif
+#if defined(CONFIG_BOARD_EARLY_INIT_R)
+ board_early_init_r,
+#endif
+ INIT_FUNC_WATCHDOG_RESET
#ifdef CONFIG_LOGBUFFER
initr_logbuffer,
#endif
#ifdef CONFIG_POST
initr_post_backlog,
#endif
+ INIT_FUNC_WATCHDOG_RESET
+#ifdef CONFIG_SYS_DELAYED_ICACHE
+ initr_icache_enable,
+#endif
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
+ initr_unlock_ram_in_cache,
+#endif
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT)
+ /*
+ * Do early PCI configuration _before_ the flash gets initialised,
+ * because PCU ressources are crucial for flash access on some boards.
+ */
+ initr_pci,
+#endif
+#ifdef CONFIG_WINBOND_83C553
+ initr_w83c553f,
+#endif
+ initr_barrier,
initr_malloc,
#ifdef CONFIG_ARCH_EARLY_INIT_R
arch_early_init_r,
@@ -363,6 +763,12 @@ init_fnc_t init_sequence_r[] = {
#ifndef CONFIG_SYS_NO_FLASH
initr_flash,
#endif
+ INIT_FUNC_WATCHDOG_RESET
+#ifdef CONFIG_PPC
+ /* initialize higher level parts of CPU like time base and timers */
+ cpu_init_r,
+ initr_spi,
+#endif
#ifdef CONFIG_CMD_NAND
initr_nand,
#endif
@@ -376,6 +782,24 @@ init_fnc_t init_sequence_r[] = {
initr_dataflash,
#endif
initr_env,
+ INIT_FUNC_WATCHDOG_RESET
+ initr_secondary_cpu,
+#ifdef CONFIG_SC3
+ initr_sc3_read_eeprom,
+#endif
+#ifdef CONFIG_HERMES
+ initr_hermes,
+#endif
+#if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET)
+ mac_read_from_eeprom,
+#endif
+ INIT_FUNC_WATCHDOG_RESET
+#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT)
+ /*
+ * Do pci configuration
+ */
+ initr_pci,
+#endif
stdio_init,
initr_jumptable,
#ifdef CONFIG_API
@@ -391,23 +815,73 @@ init_fnc_t init_sequence_r[] = {
#ifdef CONFIG_MISC_INIT_R
misc_init_r, /* miscellaneous platform-dependent init */
#endif
+#ifdef CONFIG_HERMES
+ initr_hermes_start,
+#endif
+ INIT_FUNC_WATCHDOG_RESET
+#ifdef CONFIG_CMD_KGDB
+ initr_kgdb,
+#endif
interrupt_init,
+#ifdef CONFIG_ARM
initr_enable_interrupts,
+#endif
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ initr_status_led,
+#endif
+ /* PPC has a udelay(20) here dating from 2002. Why? */
#ifdef CONFIG_CMD_NET
initr_ethaddr,
#endif
#ifdef CONFIG_BOARD_LATE_INIT
board_late_init,
#endif
+#ifdef CONFIG_CMD_SCSI
+ INIT_FUNC_WATCHDOG_RESET
+ initr_scsi,
+#endif
+#ifdef CONFIG_CMD_DOC
+ INIT_FUNC_WATCHDOG_RESET
+ initr_doc,
+#endif
#ifdef CONFIG_BITBANGMII
initr_bbmii,
#endif
#ifdef CONFIG_CMD_NET
+ INIT_FUNC_WATCHDOG_RESET
initr_net,
#endif
#ifdef CONFIG_POST
initr_post,
#endif
+#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
+ initr_pcmcia,
+#endif
+#if defined(CONFIG_CMD_IDE)
+ initr_ide,
+#endif
+#ifdef CONFIG_LAST_STAGE_INIT
+ INIT_FUNC_WATCHDOG_RESET
+ /*
+ * Some parts can be only initialized if all others (like
+ * Interrupts) are up and running (i.e. the PC-style ISA
+ * keyboard).
+ */
+ last_stage_init,
+#endif
+#ifdef CONFIG_CMD_BEDBUG
+ INIT_FUNC_WATCHDOG_RESET
+ initr_bedbug,
+#endif
+#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
+ initr_mem,
+#endif
+#ifdef CONFIG_PS2KBD
+ initr_kbd,
+#endif
+#ifdef CONFIG_MODEM_SUPPORT
+ initr_modem,
+#endif
run_main_loop,
};
diff --git a/include/common.h b/include/common.h
index 2ff8db1694a..d41aeb4f478 100644
--- a/include/common.h
+++ b/include/common.h
@@ -312,6 +312,7 @@ int mac_read_from_eeprom(void);
extern u8 _binary_dt_dtb_start[]; /* embedded device tree blob */
int set_cpu_clk_info(void);
int print_cpuinfo(void);
+int update_flash_size(int flash_size);
/**
* Show the DRAM size in a board-specific way
diff --git a/include/ide.h b/include/ide.h
index 158e1beaf95..afea85cdc2c 100644
--- a/include/ide.h
+++ b/include/ide.h
@@ -85,4 +85,11 @@ void ide_output_data(int dev, const ulong *sect_buf, int words);
void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts);
void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts);
+/**
+ * board_start_ide() - Start up the board IDE interfac
+ *
+ * @return 0 if ok
+ */
+int board_start_ide(void);
+
#endif /* _IDE_H */