powerpc: mpc83xx: remove board support for MERGERBOX and MVBLM7

These boards have been orphaned for more than 6 months.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

27 files changed, 2 insertions, 2495 deletions

diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index 6de9265088..42e0e29668 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -64,12 +64,6 @@ config TARGET_SUVD3
 config TARGET_TUXX1
 	bool "Support tuxx1"
 
-config TARGET_MERGERBOX
-	bool "Support MERGERBOX"
-
-config TARGET_MVBLM7
-	bool "Support MVBLM7"
-
 config TARGET_TQM834X
 	bool "Support TQM834x"
 
@@ -89,8 +83,6 @@ source "board/freescale/mpc837xemds/Kconfig"
 source "board/freescale/mpc837xerdb/Kconfig"
 source "board/ids/ids8313/Kconfig"
 source "board/keymile/km83xx/Kconfig"
-source "board/matrix_vision/mergerbox/Kconfig"
-source "board/matrix_vision/mvblm7/Kconfig"
 source "board/mpc8308_p1m/Kconfig"
 source "board/sbc8349/Kconfig"
 source "board/tqc/tqm834x/Kconfig"
diff --git a/board/matrix_vision/mergerbox/Kconfig b/board/matrix_vision/mergerbox/Kconfig
deleted file mode 100644
index 3857535a25..0000000000
--- a/board/matrix_vision/mergerbox/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MERGERBOX
-
-config SYS_BOARD
-	default "mergerbox"
-
-config SYS_VENDOR
-	default "matrix_vision"
-
-config SYS_CONFIG_NAME
-	default "MERGERBOX"
-
-endif
diff --git a/board/matrix_vision/mergerbox/MAINTAINERS b/board/matrix_vision/mergerbox/MAINTAINERS
deleted file mode 100644
index 20bd073b90..0000000000
--- a/board/matrix_vision/mergerbox/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MERGERBOX BOARD
-#M:	Andre Schwarz <andre.schwarz@matrix-vision.de>
-S:	Orphan (since 2014-03)
-F:	board/matrix_vision/mergerbox/
-F:	include/configs/MERGERBOX.h
-F:	configs/MERGERBOX_defconfig
diff --git a/board/matrix_vision/mergerbox/Makefile b/board/matrix_vision/mergerbox/Makefile
deleted file mode 100644
index 11a7fd2c7c..0000000000
--- a/board/matrix_vision/mergerbox/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y += mergerbox.o pci.o fpga.o sm107.o
diff --git a/board/matrix_vision/mergerbox/README b/board/matrix_vision/mergerbox/README
deleted file mode 100644
index 1994b65be1..0000000000
--- a/board/matrix_vision/mergerbox/README
+++ /dev/null
@@ -1,59 +0,0 @@
-Matrix Vision MergerBox
------------------------
-
-1.	Board Description
-
-	The MergerBox is a 120x160mm single board computing platform
-	for 3D Full-HD digital video processing.
-
-	Power Supply is 10-32VDC.
-
-2	System Components
-
-2.1	CPU
-	Freescale MPC8377 CPU running at 800MHz core and 333MHz csb.
-	256 MByte DDR-II memory @ 333MHz data rate.
-	64 MByte Nor Flash on local bus.
-	1 GByte Nand Flash on FCM.
-	1 Vitesse VSC8601 RGMII ethernet Phys.
-	1 USB host controller over ULPI I/F with 4-Port hub.
-	2 serial ports. Console running on ttyS0 @ 115200 8N1.
-	1 mPCIe expansion slot (PCIe x1 + USB) used for Wifi/Bt.
-	2 PCIe x1 busses on local mPCIe and cutom expansion connector.
-	2 SATA host ports.
-	System configuration (HRCW) is taken from I2C EEPROM.
-
-2.2	Graphics
-	SM107 emebedded video controller driving a 5" 800x480 TFT panel.
-	Connected over 32-Bit/66MHz PCI utilizing 4 MByte embedded memory.
-
-2.3	FPGA
-	Altera Cyclone-IV EP4C115 with several PCI DMA engines.
-	Connects to 7x Gennum 3G-SDI transceivers as video interconnect
-	as well as a HDMI v1.4 compliant output for 3D monitoring.
-	Utilizes two more DDR-II controllers providing 256MB memory.
-
-2.4	I2C
-	Bus1:
-		AD7418 @ 0x50 for voltage/temp. monitoring.
-		SX8650 @ 0x90 touch controller for HMI.
-		EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
-	Bus2:
-		mPCIe SMBus
-		SiI9022A @ 0x72/0xC0 HDMI transmitter.
-		TCA6416A @ 0x40 + 0x42 16-Bit I/O expander.
-		LMH1983 @ 0xCA video PLL.
-		DS1338C @ 0xD0 real-time clock with embedded crystal.
-		9FG104 @ 0xDC 4x 100MHz LVDS SerDes reference clock.
-
-3	Flash layout.
-
-	reset vector is 0x00000100, i.e. low boot.
-
-	00000000	u-boot binary.
-	00100000	FPGA raw bit file.
-	00300000	FIT image holding kernel, dtb and rescue squashfs.
-	03d00000	u-boot environment.
-	03e00000	splash image
-
-	mtd partitions are propagated to linux kernel via device tree blob.
diff --git a/board/matrix_vision/mergerbox/fpga.c b/board/matrix_vision/mergerbox/fpga.c
deleted file mode 100644
index 57552c1ae6..0000000000
--- a/board/matrix_vision/mergerbox/fpga.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * (C) Copyright 2002
- * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
- * Keith Outwater, keith_outwater@mvis.com.
- *
- * (C) Copyright 2011
- * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ACEX1K.h>
-#include <command.h>
-#include "mergerbox.h"
-#include "fpga.h"
-
-Altera_CYC2_Passive_Serial_fns altera_fns = {
-	fpga_null_fn,
-	fpga_config_fn,
-	fpga_status_fn,
-	fpga_done_fn,
-	fpga_wr_fn,
-	fpga_null_fn,
-	fpga_null_fn,
-};
-
-Altera_desc cyclone2 = {
-	Altera_CYC2,
-	passive_serial,
-	Altera_EP2C20_SIZE,
-	(void *) &altera_fns,
-	NULL,
-	0
-};
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int mergerbox_init_fpga(void)
-{
-	debug("Initialize FPGA interface\n");
-	fpga_init();
-	fpga_add(fpga_altera, &cyclone2);
-
-	return 1;
-}
-
-int fpga_null_fn(int cookie)
-{
-	return 0;
-}
-
-int fpga_config_fn(int assert, int flush, int cookie)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
-	u32 dvo = gpio->dat;
-
-	dvo &= ~FPGA_CONFIG;
-	gpio->dat = dvo;
-	udelay(5);
-	dvo |= FPGA_CONFIG;
-	gpio->dat = dvo;
-
-	return assert;
-}
-
-int fpga_done_fn(int cookie)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
-	int result = 0;
-
-	udelay(10);
-	debug("CONF_DONE check ... ");
-	if (gpio->dat & FPGA_CONF_DONE) {
-		debug("high\n");
-		result = 1;
-	} else
-		debug("low\n");
-
-	return result;
-}
-
-int fpga_status_fn(int cookie)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
-	int result = 0;
-
-	debug("STATUS check ... ");
-	if (gpio->dat & FPGA_STATUS) {
-		debug("high\n");
-		result = 1;
-	} else
-		debug("low\n");
-
-	return result;
-}
-
-int fpga_clk_fn(int assert_clk, int flush, int cookie)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
-	u32 dvo = gpio->dat;
-
-	debug("CLOCK %s\n", assert_clk ? "high" : "low");
-	if (assert_clk)
-		dvo |= FPGA_CCLK;
-	else
-		dvo &= ~FPGA_CCLK;
-
-	if (flush)
-		gpio->dat = dvo;
-
-	return assert_clk;
-}
-
-static inline int _write_fpga(u8 val, int dump)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
-	int i;
-	u32 dvo = gpio->dat;
-
-	if (dump)
-		debug("  %02x -> ", val);
-	for (i = 0; i < 8; i++) {
-		dvo &= ~FPGA_CCLK;
-		gpio->dat = dvo;
-		dvo &= ~FPGA_DIN;
-		if (dump)
-			debug("%d ", val&1);
-		if (val & 1)
-			dvo |= FPGA_DIN;
-		gpio->dat = dvo;
-		dvo |= FPGA_CCLK;
-		gpio->dat = dvo;
-		val >>= 1;
-	}
-	if (dump)
-		debug("\n");
-
-	return 0;
-}
-
-int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie)
-{
-	unsigned char *data = (unsigned char *) buf;
-	int i;
-
-	debug("fpga_wr: buf %p / size %d\n", buf, len);
-	for (i = 0; i < len; i++)
-		_write_fpga(data[i], 0);
-	debug("\n");
-
-	return FPGA_SUCCESS;
-}
diff --git a/board/matrix_vision/mergerbox/fpga.h b/board/matrix_vision/mergerbox/fpga.h
deleted file mode 100644
index dbe9bff25f..0000000000
--- a/board/matrix_vision/mergerbox/fpga.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-extern int mergerbox_init_fpga(void);
-
-extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
-extern int fpga_status_fn(int cookie);
-extern int fpga_config_fn(int assert, int flush, int cookie);
-extern int fpga_done_fn(int cookie);
-extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
-extern int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie);
-extern int fpga_null_fn(int cookie);
diff --git a/board/matrix_vision/mergerbox/mergerbox.c b/board/matrix_vision/mergerbox/mergerbox.c
deleted file mode 100644
index 5c891d1283..0000000000
--- a/board/matrix_vision/mergerbox/mergerbox.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011 Matrix Vision GmbH
- * Andre Schwarz <andre.schwarz@matrix-vision.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <hwconfig.h>
-#include <i2c.h>
-#include <spi.h>
-#include <asm/io.h>
-#include <asm/fsl_mpc83xx_serdes.h>
-#include <fdt_support.h>
-#include <spd_sdram.h>
-#include "mergerbox.h"
-#include "fpga.h"
-#include "../common/mv_common.h"
-
-static void setup_serdes(void)
-{
-	fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
-		FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
-	fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
-		FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
-}
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram(void)
-{
-	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
-	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-		CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
-phys_size_t initdram(int board_type)
-{
-	u32 msize;
-
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile clk83xx_t *clk = (clk83xx_t *)&immr->clk;
-
-	/* Enable PCI_CLK[0:1] */
-	clk->occr |= 0xc0000000;
-	udelay(2000);
-
-#if defined(CONFIG_SPD_EEPROM)
-	msize = spd_sdram();
-#else
-	immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	u32 msize_log2;
-
-	msize = CONFIG_SYS_DDR_SIZE;
-	msize_log2 = __ilog2(msize);
-
-	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
-	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
-
-	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
-	udelay(50000);
-
-	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
-	udelay(1000);
-
-	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
-	udelay(1000);
-
-	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
-	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
-	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	__asm__ __volatile__("sync");
-	udelay(1000);
-
-	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-	udelay(2000);
-#endif
-	setup_serdes();
-
-	return msize << 20;
-}
-
-int checkboard(void)
-{
-	puts("Board: Matrix Vision MergerBox\n");
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	u16 dim;
-	int result;
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (gpio83xx_t *)&immr->gpio[1];
-	unsigned char mac[6], mac_verify[6];
-	char *s = getenv("reset_env");
-
-	for (dim = 10; dim < 180; dim += 5) {
-		mergerbox_tft_dim(dim);
-		udelay(100000);
-	}
-
-	if (s)
-		mv_reset_environment();
-
-	i2c_read(SPD_EEPROM_ADDRESS, 0x80, 2, mac, sizeof(mac));
-
-	/* check if Matrix Vision prefix present and export to env */
-	if (mac[0] == 0x00 && mac[1] == 0x0c && mac[2] == 0x8d) {
-		printf("valid MAC found in eeprom: %pM\n", mac);
-		eth_setenv_enetaddr("ethaddr", mac);
-	} else {
-		printf("no valid MAC found in eeprom.\n");
-
-		/* no: check the env */
-		if (!eth_getenv_enetaddr("ethaddr", mac)) {
-			printf("no valid MAC found in env either.\n");
-			/* TODO: ask for valid MAC */
-		} else {
-			printf("valid MAC found in env: %pM\n", mac);
-			printf("updating MAC in eeprom.\n");
-
-			do {
-				result = test_and_clear_bit(20, &gpio->dat);
-				if (result)
-					printf("unprotect EEPROM failed !\n");
-				udelay(20000);
-			} while(result);
-
-			i2c_write(SPD_EEPROM_ADDRESS, 0x80, 2, mac, 6);
-			udelay(20000);
-
-			do {
-				result = test_and_set_bit(20, &gpio->dat);
-				if (result)
-					printf("protect EEPROM failed !\n");
-				udelay(20000);
-			} while(result);
-
-			printf("verify MAC %pM ... ", mac);
-			i2c_read(SPD_EEPROM_ADDRESS, 0x80, 2, mac_verify, 6);
-
-			if (!strncmp((char *)mac, (char *)mac_verify, 6))
-				printf("ok.\n");
-			else
-				/* TODO: retry or do something useful */
-				printf("FAILED (got %pM) !\n", mac_verify);
-		}
-	}
-
-	return 0;
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-
-	iopd->dat &= ~TFT_SPI_CPLD_CS;
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-
-	iopd->dat |= TFT_SPI_CPLD_CS;
-}
-
-/* control backlight pwm (display brightness).
- * allow values 0-250 with 0 = turn off and 250 = max brightness
- */
-void mergerbox_tft_dim(u16 value)
-{
-	struct spi_slave *slave;
-	u16 din;
-	u16 dout = 0;
-
-	if (value > 0 && value < 250)
-		dout = 0x4000 | value;
-
-	slave = spi_setup_slave(0, 0, 1000000, SPI_MODE_0 | SPI_CS_HIGH);
-	spi_claim_bus(slave);
-	spi_xfer(slave, 16, &dout, &din, SPI_XFER_BEGIN | SPI_XFER_END);
-	spi_release_bus(slave);
-	spi_free_slave(slave);
-}
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-	fdt_fixup_dr_usb(blob, bd);
-	ft_pci_setup(blob, bd);
-}
diff --git a/board/matrix_vision/mergerbox/mergerbox.h b/board/matrix_vision/mergerbox/mergerbox.h
deleted file mode 100644
index 53eab28f3d..0000000000
--- a/board/matrix_vision/mergerbox/mergerbox.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2011 Matrix Vision GmbH
- * Andre Schwarz <andre.schwarz@matrix-vision.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __MERGERBOX_H__
-#define __MERGERBOX_H__
-
-#define MV_GPIO
-
-/*
- * GPIO Bank 1
- */
-#define	TFT_SPI_EN	(0x80000000>>0)
-#define	FPGA_CONFIG	(0x80000000>>1)
-#define	FPGA_STATUS	(0x80000000>>2)
-#define	FPGA_CONF_DONE	(0x80000000>>3)
-#define	FPGA_DIN	(0x80000000>>4)
-#define	FPGA_CCLK	(0x80000000>>5)
-#define	MAN_RST		(0x80000000>>6)
-#define	FPGA_SYS_RST	(0x80000000>>7)
-#define	WD_WDI		(0x80000000>>8)
-#define	TFT_RST		(0x80000000>>9)
-#define	HISCON_GPIO1	(0x80000000>>10)
-#define	HISCON_GPIO2	(0x80000000>>11)
-#define	B2B_GPIO2	(0x80000000>>12)
-#define	CCU_GPIN	(0x80000000>>13)
-#define	CCU_GPOUT	(0x80000000>>14)
-#define	TFT_GPIO0	(0x80000000>>15)
-#define	TFT_GPIO1	(0x80000000>>16)
-#define	TFT_GPIO2	(0x80000000>>17)
-#define	TFT_GPIO3	(0x80000000>>18)
-#define	B2B_GPIO0	(0x80000000>>19)
-#define	B2B_GPIO1	(0x80000000>>20)
-#define	TFT_SPI_CPLD_CS	(0x80000000>>21)
-#define	TFT_SPI_CS	(0x80000000>>22)
-#define	CCU_PWR_EN	(0x80000000>>23)
-#define	B2B_GPIO3	(0x80000000>>24)
-#define	CCU_PWR_STAT	(0x80000000>>25)
-
-#define MV_GPIO1_DAT	(FPGA_CONFIG|CCU_PWR_EN|TFT_SPI_CPLD_CS)
-#define MV_GPIO1_OUT	(TFT_SPI_EN|FPGA_CONFIG|FPGA_DIN|FPGA_CCLK|CCU_PWR_EN| \
-			 TFT_SPI_CPLD_CS)
-#define MV_GPIO1_ODE	(FPGA_CONFIG|MAN_RST)
-
-/*
- * GPIO Bank 2
- */
-#define	SPI_FLASH_WP	(0x80000000>>10)
-#define	SYS_EEPROM_WP	(0x80000000>>11)
-#define	SPI_FLASH_CS	(0x80000000>>22)
-
-#define MV_GPIO2_DAT	(SYS_EEPROM_WP|SPI_FLASH_CS)
-#define MV_GPIO2_OUT	(SPI_FLASH_WP|SYS_EEPROM_WP|SPI_FLASH_CS)
-#define MV_GPIO2_ODE	0
-
-void mergerbox_tft_dim(u16 value);
-
-#endif
diff --git a/board/matrix_vision/mergerbox/pci.c b/board/matrix_vision/mergerbox/pci.c
deleted file mode 100644
index 480f3ed387..0000000000
--- a/board/matrix_vision/mergerbox/pci.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011 Matrix Vision GmbH
- * Andre Schwarz <andre.schwarz@matrix-vision.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-#include <pci.h>
-#include <asm/io.h>
-#include <asm/fsl_mpc83xx_serdes.h>
-#include "mergerbox.h"
-#include "fpga.h"
-#include "../common/mv_common.h"
-
-static struct pci_region pci_regions[] = {
-	{
-		.bus_start = CONFIG_SYS_PCI_MEM_BASE,
-		.phys_start = CONFIG_SYS_PCI_MEM_PHYS,
-		.size = CONFIG_SYS_PCI_MEM_SIZE,
-		.flags = PCI_REGION_MEM | PCI_REGION_PREFETCH
-	},
-	{
-		.bus_start = CONFIG_SYS_PCI_MMIO_BASE,
-		.phys_start = CONFIG_SYS_PCI_MMIO_PHYS,
-		.size = CONFIG_SYS_PCI_MMIO_SIZE,
-		.flags = PCI_REGION_MEM
-	},
-	{
-		.bus_start = CONFIG_SYS_PCI_IO_BASE,
-		.phys_start = CONFIG_SYS_PCI_IO_PHYS,
-		.size = CONFIG_SYS_PCI_IO_SIZE,
-		.flags = PCI_REGION_IO
-	}
-};
-
-static struct pci_region pcie_regions_0[] = {
-	{
-		.bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
-		.phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
-		.size = CONFIG_SYS_PCIE1_MEM_SIZE,
-		.flags = PCI_REGION_MEM,
-	},
-	{
-		.bus_start = CONFIG_SYS_PCIE1_IO_BASE,
-		.phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
-		.size = CONFIG_SYS_PCIE1_IO_SIZE,
-		.flags = PCI_REGION_IO,
-	},
-};
-
-static struct pci_region pcie_regions_1[] = {
-	{
-		.bus_start = CONFIG_SYS_PCIE2_MEM_BASE,
-		.phys_start = CONFIG_SYS_PCIE2_MEM_PHYS,
-		.size = CONFIG_SYS_PCIE2_MEM_SIZE,
-		.flags = PCI_REGION_MEM,
-	},
-	{
-		.bus_start = CONFIG_SYS_PCIE2_IO_BASE,
-		.phys_start = CONFIG_SYS_PCIE2_IO_PHYS,
-		.size = CONFIG_SYS_PCIE2_IO_SIZE,
-		.flags = PCI_REGION_IO,
-	},
-};
-
-void pci_init_board(void)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile sysconf83xx_t *sysconf = &immr->sysconf;
-	volatile clk83xx_t *clk = (clk83xx_t *)&immr->clk;
-	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
-	volatile law83xx_t *pcie_law = sysconf->pcielaw;
-	struct pci_region *reg[] = { pci_regions };
-	struct pci_region *pcie_reg[] = { pcie_regions_0, pcie_regions_1, };
-
-	volatile gpio83xx_t *gpio;
-	gpio = (gpio83xx_t *)&immr->gpio[0];
-
-	gpio->dat = MV_GPIO1_DAT;
-	gpio->odr = MV_GPIO1_ODE;
-	gpio->dir = MV_GPIO1_OUT;
-
-	gpio = (gpio83xx_t *)&immr->gpio[1];
-
-	gpio->dat = MV_GPIO2_DAT;
-	gpio->odr = MV_GPIO2_ODE;
-	gpio->dir = MV_GPIO2_OUT;
-
-	printf("SICRH / SICRL : 0x%08x / 0x%08x\n", immr->sysconf.sicrh,
-		immr->sysconf.sicrl);
-
-	/* Enable PCI_CLK[0:1] */
-	clk->occr |= 0xc0000000;
-	udelay(2000);
-
-	mergerbox_init_fpga();
-	mv_load_fpga();
-
-	mergerbox_tft_dim(0);
-
-	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
-	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
-
-	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
-	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
-
-	udelay(2000);
-
-	mpc83xx_pci_init(1, reg);
-
-	/* Deassert the resets in the control register */
-	out_be32(&sysconf->pecr1, 0xE0008000);
-	out_be32(&sysconf->pecr2, 0xE0008000);
-	udelay(2000);
-
-	out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
-	out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
-
-	out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR);
-	out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB);
-
-	mpc83xx_pcie_init(2, pcie_reg);
-}
diff --git a/board/matrix_vision/mergerbox/sm107.c b/board/matrix_vision/mergerbox/sm107.c
deleted file mode 100644
index d24f926269..0000000000
--- a/board/matrix_vision/mergerbox/sm107.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) 2011 Matrix Vision GmbH
- * Andre Schwarz <andre.schwarz@matrix-vision.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <ns16550.h>
-#include <netdev.h>
-#include <sm501.h>
-#include <pci.h>
-#include "../common/mv_common.h"
-
-#ifdef CONFIG_VIDEO
-static const SMI_REGS init_regs_800x480[] = {
-	/* set endianess to little endian */
-	{0x0005c, 0x00000000},
-	/* PCI drive 12mA */
-	{0x00004, 0x42401001},
-	/* current clock */
-	{0x0003c, 0x310a1818},
-	/* clocks for pm0... */
-	{0x00040, 0x0002184f},
-	{0x00044, 0x2a1a0a01},
-	/* GPIO */
-	{0x10008, 0x00000000},
-	{0x1000C, 0x00000000},
-	/* panel control regs */
-	{0x80000, 0x0f017106},
-	{0x80004, 0x0},
-	{0x80008, 0x0},
-	{0x8000C, 0x00000000},
-	{0x80010, 0x0c800c80},
-	/* width 0x320 */
-	{0x80014, 0x03200000},
-	/* height 0x1e0 */
-	{0x80018, 0x01E00000},
-	{0x8001C, 0x0},
-	{0x80020, 0x01df031f},
-	{0x80024, 0x041f031f},
-	{0x80028, 0x00800347},
-	{0x8002C, 0x020c01df},
-	{0x80030, 0x000201e9},
-	{0x80200, 0x00000000},
-	/* ZV[0:7] */
-	{0x00008, 0x00ff0000},
-	/* 24-Bit TFT */
-	{0x0000c, 0x3f000000},
-	{0, 0}
-};
-
-/*
- * Returns SM107 register base address. First thing called in the driver.
- */
-unsigned int board_video_init(void)
-{
-	pci_dev_t devbusfn;
-	u32 addr;
-
-	devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
-	if (devbusfn != -1) {
-		pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1,
-			(u32 *)&addr);
-		return addr & 0xfffffffe;
-	}
-
-	return 0;
-}
-
-/*
- * Called after initializing the SM501 and before clearing the screen.
- */
-void board_validate_screen(unsigned int base)
-{
-}
-
-/*
- * Returns SM107 framebuffer address
- */
-unsigned int board_video_get_fb(void)
-{
-	pci_dev_t devbusfn;
-	u32 addr;
-
-	devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
-	if (devbusfn != -1) {
-		pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0,
-			(u32 *)&addr);
-		addr &= 0xfffffffe;
-#ifdef CONFIG_VIDEO_SM501_FBMEM_OFFSET
-		addr += CONFIG_VIDEO_SM501_FBMEM_OFFSET;
-#endif
-		return addr;
-	}
-
-	printf("board_video_get_fb(): FAILED\n");
-
-	return 0;
-}
-
-/*
- * Return a pointer to the initialization sequence.
- */
-const SMI_REGS *board_get_regs(void)
-{
-	return init_regs_800x480;
-}
-
-int board_get_width(void)
-{
-	return 800;
-}
-
-int board_get_height(void)
-{
-	return 480;
-}
-#endif
diff --git a/board/matrix_vision/mvblm7/.gitignore b/board/matrix_vision/mvblm7/.gitignore
deleted file mode 100644
index 469f1bc4c1..0000000000
--- a/board/matrix_vision/mvblm7/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-bootscript.img
diff --git a/board/matrix_vision/mvblm7/Kconfig b/board/matrix_vision/mvblm7/Kconfig
deleted file mode 100644
index ea7a6f82c0..0000000000
--- a/board/matrix_vision/mvblm7/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MVBLM7
-
-config SYS_BOARD
-	default "mvblm7"
-
-config SYS_VENDOR
-	default "matrix_vision"
-
-config SYS_CONFIG_NAME
-	default "MVBLM7"
-
-endif
diff --git a/board/matrix_vision/mvblm7/MAINTAINERS b/board/matrix_vision/mvblm7/MAINTAINERS
deleted file mode 100644
index 947a14ed50..0000000000
--- a/board/matrix_vision/mvblm7/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MVBLM7 BOARD
-#M:	Andre Schwarz <andre.schwarz@matrix-vision.de>
-S:	Orphan (since 2014-03)
-F:	board/matrix_vision/mvblm7/
-F:	include/configs/MVBLM7.h
-F:	configs/MVBLM7_defconfig
diff --git a/board/matrix_vision/mvblm7/Makefile b/board/matrix_vision/mvblm7/Makefile
deleted file mode 100644
index caa6cfd34c..0000000000
--- a/board/matrix_vision/mvblm7/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Copyright (C) Freescale Semiconductor, Inc. 2006.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= mvblm7.o pci.o fpga.o
-
-extra-y := bootscript.img
-
-MKIMAGEFLAGS_bootscript.image := -T script -C none -n M7_script
-
-$(obj)/bootscript.img: $(src)/bootscript
-	$(call cmd,mkimage)
diff --git a/board/matrix_vision/mvblm7/README.mvblm7 b/board/matrix_vision/mvblm7/README.mvblm7
deleted file mode 100644
index a0686f7fa5..0000000000
--- a/board/matrix_vision/mvblm7/README.mvblm7
+++ /dev/null
@@ -1,84 +0,0 @@
-Matrix Vision mvBlueLYNX-M7 (mvBL-M7)
--------------------------------------
-
-1.	Board Description
-
-	The mvBL-M7 is a 120x120mm single board computing platform
-	with strong focus on stereo image processing applications.
-
-	Power Supply is either VDC 12-48V or Pover over Ethernet (PoE)
-	on any port (requires add-on board).
-
-2	System Components
-
-2.1	CPU
-	Freescale MPC8343VRAGDB CPU running at 400MHz core and 266MHz csb.
-	512MByte DDR-II memory @ 133MHz.
-	8 MByte Nor Flash on local bus.
-	2 Vitesse VSC8601 RGMII ethernet Phys.
-	1 USB host controller over ULPI I/F.
-	2 serial ports. Console running on ttyS0 @ 115200 8N1.
-	1 SD-Card slot connected to SPI.
-	System configuration (HRCW) is taken from I2C EEPROM.
-
-2.2	PCI
-	A miniPCI Type-III socket is present. PCI clock fixed at 66MHz.
-
-2.3	FPGA
-	Altera Cyclone-II EP2C20/35 with PCI DMA engines.
-	Connects to dual Matrix Vision specific CCD/CMOS sensor interfaces.
-	Utilizes another 256MB DDR-II memory and 32-128MB Nand Flash.
-
-2.3.1	I/O @ FPGA
-	2x8 Outputs : Infineon High-Side Switches to Main Supply.
-	2x8 Inputs  : Programmable input threshold + trigger capabilities
-	2 dedicated flash interfaces for illuminator boards.
-	Cross trigger for chaining several boards.
-
-2.4	I2C
-	Bus1:
-		MAX5381 DAC @ 0x60 for 1st digital input threshold.
-		LM75 @ 0x90 for temperature monitoring.
-		EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
-		1st image sensor interface (slave addresses depend on sensor)
-	Bus2:
-		MAX5381 DAC @ 0x60 for 2nd digital input threshold.
-		2nd image sensor interface (slave addresses depend on sensor)
-
-3	Flash layout.
-
-	reset vector is 0xFFF00100, i.e. "HIGHBOOT".
-
-	FF800000	environment
-	FF802000	redundant environment
-	FF804000	u-boot script image
-	FF806000	redundant u-boot script image
-	FF808000	device tree blob
-	FF80A000	redundant device tree blob
-	FF80C000	tbd.
-	FF80E000	tbd.
-	FF810000	kernel
-	FFC00000	root FS
-	FFF00000	u-boot
-	FFF80000	FPGA raw bit file
-
-	mtd partitions are propagated to linux kernel via device tree blob.
-
-4	Booting
-
-	On startup the bootscript @ FF804000 is executed. This script can be
-	exchanged easily. Default boot mode is "boot from flash", i.e. system
-	works stand-alone.
-
-	This behaviour depends on some environment variables :
-
-	"netboot" : yes ->try dhcp/bootp and boot from network.
-	A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
-	DHCP server configuration, e.g. to provide different images to
-	different devices.
-
-	During netboot the system tries to get 3 image files:
-	1. Kernel - name + data is given during BOOTP.
-	2. Initrd - name is stored in "initrd_name"
-	3. device tree blob - name is stored in "dtb_name"
-	Fallback files are the flash versions.
diff --git a/board/matrix_vision/mvblm7/bootscript b/board/matrix_vision/mvblm7/bootscript
deleted file mode 100644
index dc385fde79..0000000000
--- a/board/matrix_vision/mvblm7/bootscript
+++ /dev/null
@@ -1,43 +0,0 @@
-echo
-echo "==== running autoscript ===="
-echo
-setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram} \${mv_dtb_addr_ram}
-setenv ramkernel setenv kernel_boot \${loadaddr}
-setenv flashkernel setenv kernel_boot \${mv_kernel_addr}
-setenv cpird cp \${mv_initrd_addr} \${mv_initrd_addr_ram} \${mv_initrd_length}
-setenv bootfromflash run flashkernel cpird ramparam addcons bootdtb
-setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name}
-setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000
-setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup
-setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run ramkernel
-if test ${console} = yes;
-then
-setenv addcons setenv bootargs \${bootargs} console=ttyS\${console_nr},\${baudrate}N8
-else
-setenv addcons setenv bootargs \${bootargs} console=tty0
-fi
-setenv set_static_ip setenv ipaddr \${static_ipaddr}
-setenv set_static_nm setenv netmask \${static_netmask}
-setenv set_static_gw setenv gatewayip \${static_gateway}
-setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask}
-setenv ramparam setenv bootargs root=/dev/ram0 ro rootfstype=squashfs
-if test ${autoscript_boot} != no;
-then
-  if test ${netboot} = yes;
-  then
-    bootp
-    if test $? = 0;
-    then
-      echo "=== bootp succeeded -> netboot ==="
-      run set_ip
-      run getdtb rundtb bootfromnet ramparam addcons bootdtb
-    else
-      echo "=== netboot failed ==="
-    fi
-  fi
-  run set_static_ip set_static_nm set_static_gw set_ip
-  echo "=== bootfromflash ==="
-  run cpdtb rundtb bootfromflash
-else
-  echo "=== boot stopped with autoscript_boot no ==="
-fi
diff --git a/board/matrix_vision/mvblm7/fpga.c b/board/matrix_vision/mvblm7/fpga.c
deleted file mode 100644
index c0c5bedb2a..0000000000
--- a/board/matrix_vision/mvblm7/fpga.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * (C) Copyright 2002
- * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
- * Keith Outwater, keith_outwater@mvis.com.
- *
- * (C) Copyright 2008
- * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ACEX1K.h>
-#include <command.h>
-#include "fpga.h"
-#include "mvblm7.h"
-
-#ifdef FPGA_DEBUG
-#define fpga_debug(fmt, args...)      printf("%s: "fmt, __func__, ##args)
-#else
-#define fpga_debug(fmt, args...)
-#endif
-
-Altera_CYC2_Passive_Serial_fns altera_fns = {
-	fpga_null_fn,
-	fpga_config_fn,
-	fpga_status_fn,
-	fpga_done_fn,
-	fpga_wr_fn,
-	fpga_null_fn,
-	fpga_null_fn,
-};
-
-Altera_desc cyclone2 = {
-	Altera_CYC2,
-	passive_serial,
-	Altera_EP2C20_SIZE,
-	(void *) &altera_fns,
-	NULL,
-	0
-};
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int mvblm7_init_fpga(void)
-{
-	fpga_debug("Initialize FPGA interface\n");
-	fpga_init();
-	fpga_add(fpga_altera, &cyclone2);
-	fpga_config_fn(0, 1, 0);
-	udelay(60);
-
-	return 1;
-}
-
-int fpga_null_fn(int cookie)
-{
-	return 0;
-}
-
-int fpga_config_fn(int assert, int flush, int cookie)
-{
-	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
-	u32 dvo = gpio->dat;
-
-	fpga_debug("SET config : %s\n", assert ? "low" : "high");
-	if (assert)
-		dvo |= FPGA_CONFIG;
-	else
-		dvo &= ~FPGA_CONFIG;
-
-	if (flush)
-		gpio->dat = dvo;
-
-	return assert;
-}
-
-int fpga_done_fn(int cookie)
-{
-	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
-	int result = 0;
-
-	udelay(10);
-	fpga_debug("CONF_DONE check ... ");
-	if (gpio->dat & FPGA_CONF_DONE)  {
-		fpga_debug("high\n");
-		result = 1;
-	} else
-		fpga_debug("low\n");
-
-	return result;
-}
-
-int fpga_status_fn(int cookie)
-{
-	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
-	int result = 0;
-
-	fpga_debug("STATUS check ... ");
-	if (gpio->dat & FPGA_STATUS)  {
-		fpga_debug("high\n");
-		result = 1;
-	} else
-		fpga_debug("low\n");
-
-	return result;
-}
-
-int fpga_clk_fn(int assert_clk, int flush, int cookie)
-{
-	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
-	u32 dvo = gpio->dat;
-
-	fpga_debug("CLOCK %s\n", assert_clk ? "high" : "low");
-	if (assert_clk)
-		dvo |= FPGA_CCLK;
-	else
-		dvo &= ~FPGA_CCLK;
-
-	if (flush)
-		gpio->dat = dvo;
-
-	return assert_clk;
-}
-
-static inline int _write_fpga(u8 val, int dump)
-{
-	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (volatile gpio83xx_t *)&im->gpio[0];
-	int i;
-	u32 dvo = gpio->dat;
-
-	if (dump)
-		fpga_debug("  %02x -> ", val);
-	for (i = 0; i < 8; i++) {
-		dvo &= ~FPGA_CCLK;
-		gpio->dat = dvo;
-		dvo &= ~FPGA_DIN;
-		if (dump)
-			fpga_debug("%d ", val&1);
-		if (val & 1)
-			dvo |= FPGA_DIN;
-		gpio->dat = dvo;
-		dvo |= FPGA_CCLK;
-		gpio->dat = dvo;
-		val >>= 1;
-	}
-	if (dump)
-		fpga_debug("\n");
-
-	return 0;
-}
-
-int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie)
-{
-	unsigned char *data = (unsigned char *) buf;
-	int i;
-
-	fpga_debug("fpga_wr: buf %p / size %d\n", buf, len);
-	for (i = 0; i < len; i++)
-		_write_fpga(data[i], 0);
-	fpga_debug("\n");
-
-	return FPGA_SUCCESS;
-}
diff --git a/board/matrix_vision/mvblm7/fpga.h b/board/matrix_vision/mvblm7/fpga.h
deleted file mode 100644
index b480c09b24..0000000000
--- a/board/matrix_vision/mvblm7/fpga.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * (C) Copyright 2002
- * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
- * Keith Outwater, keith_outwater@mvis.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-extern int mvblm7_init_fpga(void);
-
-extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
-extern int fpga_status_fn(int cookie);
-extern int fpga_config_fn(int assert, int flush, int cookie);
-extern int fpga_done_fn(int cookie);
-extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
-extern int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie);
-extern int fpga_null_fn(int cookie);
diff --git a/board/matrix_vision/mvblm7/mvblm7.c b/board/matrix_vision/mvblm7/mvblm7.c
deleted file mode 100644
index f3c16a3e9c..0000000000
--- a/board/matrix_vision/mvblm7/mvblm7.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006.
- *
- * (C) Copyright 2008
- * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc83xx.h>
-#include <asm/mpc8349_pci.h>
-#include <pci.h>
-#include <spi.h>
-#include <asm/mmu.h>
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#endif
-
-#include "../common/mv_common.h"
-#include "mvblm7.h"
-
-int fixed_sdram(void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 msize = 0;
-	u32 ddr_size;
-	u32 ddr_size_log2;
-	char *s = getenv("ddr_size");
-
-	msize = CONFIG_SYS_DDR_SIZE;
-	if (s) {
-		u32 env_ddr_size = simple_strtoul(s, NULL, 10);
-		if (env_ddr_size == 512)
-			msize = 512;
-	}
-
-	for (ddr_size = msize << 20, ddr_size_log2 = 0;
-	     (ddr_size > 1);
-	     ddr_size = ddr_size >> 1, ddr_size_log2++) {
-		if (ddr_size & 1)
-			return -1;
-	}
-	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
-	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) &
-		LAWAR_SIZE);
-
-	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
-	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
-	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
-	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
-
-	asm("sync;isync");
-	udelay(600);
-
-	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-
-	asm("sync;isync");
-	udelay(500);
-
-	return msize;
-}
-
-phys_size_t initdram(int board_type)
-{
-	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	u32 msize = 0;
-
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
-		return -1;
-
-	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
-	msize = fixed_sdram();
-
-	/* return total bus RAM size(bytes) */
-	return msize * 1024 * 1024;
-}
-
-int misc_init_r(void)
-{
-	char *s = getenv("reset_env");
-
-	if (s) {
-		mv_reset_environment();
-	}
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	puts("Board: Matrix Vision mvBlueLYNX-M7\n");
-
-	return 0;
-}
-
-#ifdef CONFIG_HARD_SPI
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-
-	iopd->dat &= ~MVBLM7_MMC_CS;
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-
-	iopd->dat |= ~MVBLM7_MMC_CS;
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-}
-
-#endif
diff --git a/board/matrix_vision/mvblm7/mvblm7.h b/board/matrix_vision/mvblm7/mvblm7.h
deleted file mode 100644
index de9fec7fb8..0000000000
--- a/board/matrix_vision/mvblm7/mvblm7.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __MVBC_H__
-#define __MVBC_H__
-
-#define MV_GPIO
-
-#define FPGA_CONFIG     0x80000000
-#define FPGA_CCLK       0x40000000
-#define FPGA_DIN        0x20000000
-#define FPGA_STATUS     0x10000000
-#define FPGA_CONF_DONE  0x08000000
-
-#define WD_WDI          0x00400000
-#define WD_TS           0x00200000
-#define MAN_RST         0x00100000
-
-#define MV_GPIO_DAT	(WD_TS)
-#define MV_GPIO_OUT	(FPGA_CONFIG|FPGA_DIN|FPGA_CCLK|MVBLM7_MMC_CS)
-#define MV_GPIO_ODE	(FPGA_CONFIG|MAN_RST)
-
-#endif
diff --git a/board/matrix_vision/mvblm7/pci.c b/board/matrix_vision/mvblm7/pci.c
deleted file mode 100644
index f14837ad40..0000000000
--- a/board/matrix_vision/mvblm7/pci.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006.
- *
- * (C) Copyright 2008
- * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#endif
-#include <pci.h>
-#include <mpc83xx.h>
-#include <fpga.h>
-#include "mvblm7.h"
-#include "fpga.h"
-#include "../common/mv_common.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct pci_region pci_regions[] = {
-	{
-		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
-		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
-		size: CONFIG_SYS_PCI1_MEM_SIZE,
-		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
-	},
-	{
-		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
-		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
-		size: CONFIG_SYS_PCI1_MMIO_SIZE,
-		flags: PCI_REGION_MEM
-	},
-	{
-		bus_start: CONFIG_SYS_PCI1_IO_BASE,
-		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
-		size: CONFIG_SYS_PCI1_IO_SIZE,
-		flags: PCI_REGION_IO
-	}
-};
-
-void pci_init_board(void)
-{
-	int i;
-	volatile immap_t *immr;
-	volatile pcictrl83xx_t *pci_ctrl;
-	volatile gpio83xx_t *gpio;
-	volatile clk83xx_t *clk;
-	volatile law83xx_t *pci_law;
-	struct pci_region *reg[] = { pci_regions };
-
-	immr = (immap_t *) CONFIG_SYS_IMMR;
-	clk = (clk83xx_t *) &immr->clk;
-	pci_ctrl = immr->pci_ctrl;
-	pci_law = immr->sysconf.pcilaw;
-	gpio  = (volatile gpio83xx_t *)&immr->gpio[0];
-
-	gpio->dat = MV_GPIO_DAT;
-	gpio->odr = MV_GPIO_ODE;
-	gpio->dir = MV_GPIO_OUT;
-
-	printf("SICRH / SICRL : 0x%08x / 0x%08x\n", immr->sysconf.sicrh,
-		immr->sysconf.sicrl);
-
-	mvblm7_init_fpga();
-	mv_load_fpga();
-
-	gpio->dir = MV_GPIO_OUT & ~(FPGA_DIN|FPGA_CCLK);
-
-	/* Enable PCI_CLK_OUTPUTs 0 and 1 with 1:1 clocking */
-	clk->occr = 0xc0000000;
-
-	pci_ctrl[0].gcr = 0;
-	udelay(2000);
-	pci_ctrl[0].gcr = 1;
-
-	for (i = 0; i < 1000; ++i)
-		udelay(1000);
-
-	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
-	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_1GB;
-
-	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
-	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
-
-	mpc83xx_pci_init(1, reg);
-}
diff --git a/configs/MERGERBOX_defconfig b/configs/MERGERBOX_defconfig
deleted file mode 100644
index 34a527ee12..0000000000
--- a/configs/MERGERBOX_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC83xx=y
-CONFIG_TARGET_MERGERBOX=y
diff --git a/configs/MVBLM7_defconfig b/configs/MVBLM7_defconfig
deleted file mode 100644
index cc81b5c805..0000000000
--- a/configs/MVBLM7_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC83xx=y
-CONFIG_TARGET_MVBLM7=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 036bc838ab..3caa8cf294 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,8 @@ The list should be sorted in reverse chronological order.
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+MERGERBOX        powerpc     mpc83xx        -           -           Andre Schwarz <andre.schwarz@matrix-vision.de>
+MVBLM7           powerpc     mpc83xx        -           -           Andre Schwarz <andre.schwarz@matrix-vision.de>
 bluestone        powerpc     ppc4xx         -           -           Tirumala Marri <tmarri@apm.com>
 CRAYL1           powerpc     ppc4xx         -           -           David Updegraff <dave@cray.com>
 KAREF            powerpc     ppc4xx         -           -           Travis Sawyer <travis.sawyer@sandburst.com>
diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h
deleted file mode 100644
index 19ea3167af..0000000000
--- a/include/configs/MERGERBOX.h
+++ /dev/null
@@ -1,599 +0,0 @@
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011 Matrix Vision GmbH
- * Andre Schwarz <andre.schwarz@matrix-vision.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <version.h>
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300	1
-#define CONFIG_MPC837x	1
-#define CONFIG_MPC8377	1
-
-#define CONFIG_SYS_TEXT_BASE	0xFC000000
-
-#define CONFIG_PCI	1
-#define CONFIG_PCI_INDIRECT_BRIDGE 1
-
-#define	CONFIG_MASK_AER_AO
-#define CONFIG_DISPLAY_AER_FULL
-
-#define CONFIG_MISC_INIT_R
-
-/*
- * On-board devices
- */
-#define CONFIG_TSEC_ENET
-
-/*
- * System Clock Setup
- */
-#define CONFIG_83XX_CLKIN	66666667 /* in Hz */
-#define CONFIG_PCIE
-#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES
-#define CONFIG_SYS_CLK_FREQ	CONFIG_83XX_CLKIN
-
-/*
- * Hardware Reset Configuration Word stored in EEPROM.
- */
-#define CONFIG_SYS_HRCW_LOW	0
-#define CONFIG_SYS_HRCW_HIGH	0
-
-/* Arbiter Configuration Register */
-#define CONFIG_SYS_ACR_PIPE_DEP	3
-#define CONFIG_SYS_ACR_RPTCNT	3
-
-/* System Priority Control Regsiter */
-#define CONFIG_SYS_SPCR_TSECEP	3
-
-/* System Clock Configuration Register */
-#define CONFIG_SYS_SCCR_TSEC1CM		3
-#define CONFIG_SYS_SCCR_TSEC2CM		0
-#define CONFIG_SYS_SCCR_SDHCCM		3
-#define CONFIG_SYS_SCCR_ENCCM		3 /* also clock for I2C-1 */
-#define CONFIG_SYS_SCCR_USBDRCM		CONFIG_SYS_SCCR_ENCCM /* must match */
-#define CONFIG_SYS_SCCR_PCIEXP1CM	3
-#define CONFIG_SYS_SCCR_PCIEXP2CM	3
-#define CONFIG_SYS_SCCR_PCICM		1
-#define CONFIG_SYS_SCCR_SATACM		0xFF
-
-/*
- * System IO Config
- */
-#define CONFIG_SYS_SICRH	0x087c0000
-#define CONFIG_SYS_SICRL	0x40000000
-
-/*
- * Output Buffer Impedance
- */
-#define CONFIG_SYS_OBIR		0x30000000
-
-/*
- * IMMR new address
- */
-#define CONFIG_SYS_IMMR		0xE0000000
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_DDR_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_83XX_DDR_USES_CS0
-
-#define CONFIG_SYS_DDRCDR_VALUE		(DDRCDR_EN | DDRCDR_PZ_HIZ |\
-					 DDRCDR_NZ_HIZ | DDRCDR_ODT |\
-					 DDRCDR_Q_DRN)
-
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
-
-#define CONFIG_SYS_DDR_MODE_WEAK
-#define CONFIG_SYS_DDR_WRITE_DATA_DELAY	2
-#define CONFIG_SYS_DDR_CPO	0x1f
-
-/* SPD table located at offset 0x20 in extended adressing ROM
- * used for HRCW fetch after power-on reset
- */
-#define	CONFIG_SPD_EEPROM
-#define	SPD_EEPROM_ADDRESS	0x50
-#define	SPD_EEPROM_OFFSET	0x20
-#define	SPD_EEPROM_ADDR_LEN	2
-
-/*
- * The reserved memory
- */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN		(512*1024)
-#define CONFIG_SYS_MALLOC_LEN		(512*1024)
-
-/*
- * Initial RAM Base Address Setup
- */
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE -\
-					 GENERATED_GBL_DATA_SIZE)
-
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
-#define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_8
-#define CONFIG_SYS_LBC_LBCR	0x00000000
-#define CONFIG_FSL_ELBC		1
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_FLASH_SIZE		64
-
-#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | LBLAWAR_64MB)
-
-#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE | BR_PS_16 |\
-				 BR_MS_GPCM | BR_V)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_FLASH_BASE | OR_UPM_XAM |\
-				 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 |\
-				 OR_GPCM_XACS | OR_GPCM_SCY_15 |\
-				 OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET |\
-				 OR_GPCM_EAD)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	512
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500 /* Flash Write Timeout (ms) */
-
-/*
- * NAND Flash on the Local Bus
- */
-#define CONFIG_MTD_NAND_VERIFY_WRITE	1
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_NAND_FSL_ELBC		1
-
-#define CONFIG_SYS_NAND_BASE	0xE0600000
-#define CONFIG_SYS_BR1_PRELIM	(CONFIG_SYS_NAND_BASE | BR_DECC_CHK_GEN |\
-				 BR_PS_8 | BR_MS_FCM | BR_V)
-#define CONFIG_SYS_OR1_PRELIM	(OR_AM_32KB | OR_FCM_BCTLD | OR_FCM_CST |\
-				 OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_RST |\
-				 OR_FCM_TRLX | OR_FCM_EHTR)
-
-#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
-#define CONFIG_SYS_LBLAWAR1_PRELIM	(LBLAWAR_EN | LBLAWAR_32KB)
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
-
-#define CONFIG_CONSOLE		ttyS0
-#define CONFIG_BAUDRATE		115200
-
-/* SERDES */
-#define CONFIG_FSL_SERDES
-#define CONFIG_FSL_SERDES1	0xe3000
-#define CONFIG_FSL_SERDES2	0xe3100
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_STDOUT_VIA_ALIAS 1
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI_MEM_BASE		0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS		CONFIG_SYS_PCI_MEM_BASE
-#define CONFIG_SYS_PCI_MEM_SIZE		(256 << 20)
-#define CONFIG_SYS_PCI_MMIO_BASE	0x90000000
-#define CONFIG_SYS_PCI_MMIO_PHYS	CONFIG_SYS_PCI_MMIO_BASE
-#define CONFIG_SYS_PCI_MMIO_SIZE	(256 << 20)
-#define CONFIG_SYS_PCI_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI_IO_PHYS		0xE0300000
-#define CONFIG_SYS_PCI_IO_SIZE		(1 << 20)
-
-#ifdef CONFIG_PCIE
-#define CONFIG_SYS_PCIE1_BASE		0xA0000000
-#define CONFIG_SYS_PCIE1_CFG_BASE	0xA0000000
-#define CONFIG_SYS_PCIE1_CFG_SIZE	(128 << 20)
-#define CONFIG_SYS_PCIE1_MEM_BASE	0xA8000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0xA8000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	(256 << 20)
-#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xB8000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	(8 << 20)
-
-#define CONFIG_SYS_PCIE2_BASE		0xC0000000
-#define CONFIG_SYS_PCIE2_CFG_BASE	0xC0000000
-#define CONFIG_SYS_PCIE2_CFG_SIZE	(128 << 20)
-#define CONFIG_SYS_PCIE2_MEM_BASE	0xC8000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xC8000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE	(256 << 20)
-#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xD8000000
-#define CONFIG_SYS_PCIE2_IO_SIZE	(8 << 20)
-#endif
-
-#define CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
-
-/*
- * TSEC
- */
-#define CONFIG_GMII			/* MII PHY management */
-#define CONFIG_SYS_VSC8601_SKEWFIX
-#define	CONFIG_SYS_VSC8601_SKEW_TX	3
-#define	CONFIG_SYS_VSC8601_SKEW_RX	3
-
-#define CONFIG_TSEC1
-#define CONFIG_HAS_ETH0
-#define CONFIG_TSEC1_NAME		"TSEC0"
-#define CONFIG_SYS_TSEC1_OFFSET		0x24000
-#define TSEC1_PHY_ADDR			0x10
-#define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC1_PHYIDX			0
-
-#define CONFIG_ETHPRIME			"TSEC0"
-#define CONFIG_HAS_ETH0
-
-/*
- * SATA
- */
-#define CONFIG_LIBATA
-#define CONFIG_FSL_SATA
-
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1_OFFSET	0x18000
-#define CONFIG_SYS_SATA1	(CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
-#define CONFIG_SYS_SATA1_FLAGS	FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2_OFFSET	0x19000
-#define CONFIG_SYS_SATA2	(CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
-#define CONFIG_SYS_SATA2_FLAGS	FLAGS_DMA
-
-#define CONFIG_LBA48
-#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_VENDOREX
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_NTPSERVER
-#define CONFIG_BOOTP_RANDOM_DELAY
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_LIB_RAND
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_SATA
-
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=NOR,nand0=NAND"
-#define MTDPARTS_DEFAULT "mtdparts=NOR:1M(u-boot),2M(FPGA);NAND:-(root)"
-
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE	1
-
-#define CONFIG_CMDLINE_EDITING	1
-#define CONFIG_AUTO_COMPLETE
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_LOAD_ADDR	0x2000000
-#define CONFIG_LOADADDR		0x4000000
-#define CONFIG_SYS_CBSIZE	256
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
-#define CONFIG_LOADS_ECHO		1
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1
-
-#define CONFIG_SYS_MEMTEST_START	(60<<20)
-#define CONFIG_SYS_MEMTEST_END		(70<<20)
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(256 << 20) /* Initial Memory map for Linux */
-
-/*
- * Core HID Setup
- */
-#define CONFIG_SYS_HID0_INIT	0x000000000
-#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
-				 HID0_ENABLE_INSTRUCTION_CACHE)
-#define CONFIG_SYS_HID2		HID2_HBE
-
-/*
- * MMU Setup
- */
-#define CONFIG_HIGH_BATS	1
-
-/* DDR: cache cacheable */
-#define CONFIG_SYS_SDRAM	CONFIG_SYS_SDRAM_BASE
-
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM | BATL_PP_RW |\
-				 BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM | BATU_BL_256M | BATU_VS |\
-				 BATU_VP)
-#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
-
-/* unused */
-#define CONFIG_SYS_IBAT1L	(0)
-#define CONFIG_SYS_IBAT1U	(0)
-#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
-
-/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_IMMR | BATL_PP_RW |\
-				 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS |\
-				 BATU_VP)
-#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
-
-/* unused */
-#define CONFIG_SYS_IBAT3L	(0)
-#define CONFIG_SYS_IBAT3U	(0)
-#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
-
-/* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_FLASH_BASE | BATL_PP_RW |\
-				 BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_FLASH_BASE | BATU_BL_64M |\
-				 BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT4L	(CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \
-				 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
-
-/* Stack in dcache: cacheable, no memory coherence */
-#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
-#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K |\
-				 BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
-#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
-
-/* PCI MEM space: cacheable */
-#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_RW |\
-				 BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M |\
-				 BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
-#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
-
-/* PCI MMIO space: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT7L	(CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_RW | \
-				 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT7U	(CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M |\
-				 BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
-
-/*
- * I2C EEPROM settings
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
-#define CONFIG_SYS_EEPROM_SIZE			0x4000
-
-/*
- * Environment Configuration
- */
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		0xFFD00000
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-
-/*
- * Video
- */
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_SM501_PCI
-#define VIDEO_FB_LITTLE_ENDIAN
-#define CONFIG_CMD_BMP
-#define CONFIG_VIDEO_SM501
-#define CONFIG_VIDEO_SM501_32BPP
-#define CONFIG_VIDEO_SM501_FBMEM_OFFSET	0x10000
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)
-
-/*
- * SPI
- */
-#define CONFIG_MPC8XXX_SPI
-
-/*
- * USB
- */
-#define CONFIG_SYS_USB_HOST
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_HAS_FSL_DR_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_KEYBOARD
-/*
- *
- */
-#define CONFIG_BOOTDELAY	5
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_STOP_STR	"s"
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_RESET_TO_RETRY	1000
-
-#define MV_CI		"MergerBox"
-#define MV_VCI		"MergerBox"
-#define MV_FPGA_DATA	0xfc100000
-#define MV_FPGA_SIZE	0x00200000
-
-#define CONFIG_SHOW_BOOT_PROGRESS 1
-
-#define MV_KERNEL_ADDR_RAM	0x02800000
-#define MV_DTB_ADDR_RAM		0x00600000
-#define MV_INITRD_ADDR_RAM	0x01000000
-#define MV_FITADDR		0xfc300000
-#define	MV_SPLAH_ADDR		0xffe00000
-
-#define CONFIG_BOOTCOMMAND	"run i2c_init;if test ${boot_sqfs} -eq 1;"\
-				"then; run fitboot;else;run ubiboot;fi;"
-#define CONFIG_BOOTARGS		"console=ttyS0,115200n8"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"console_nr=0\0"\
-	"stdin=serial\0"\
-	"stdout=serial\0"\
-	"stderr=serial\0"\
-	"boot_sqfs=1\0"\
-	"usb_dr_mode=host\0"\
-	"bootfile=MergerBox.fit\0"\
-	"baudrate=" __stringify(CONFIG_BAUDRATE) "\0"\
-	"fpga=0\0"\
-	"fpgadata=" __stringify(MV_FPGA_DATA) "\0"\
-	"fpgadatasize=" __stringify(MV_FPGA_SIZE) "\0"\
-	"mv_kernel_ram=" __stringify(MV_KERNEL_ADDR_RAM) "\0"\
-	"mv_initrd_ram=" __stringify(MV_INITRD_ADDR_RAM) "\0"\
-	"mv_dtb_ram=" __stringify(MV_DTB_ADDR_RAM) "\0"\
-	"uboota=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"\
-	"fitaddr=" __stringify(MV_FITADDR) "\0"\
-	"mv_version=" U_BOOT_VERSION "\0"\
-	"mtdids=" MTDIDS_DEFAULT "\0"\
-	"mtdparts=" MTDPARTS_DEFAULT "\0"\
-	"dhcp_client_id=" MV_CI "\0"\
-	"dhcp_vendor-class-identifier=" MV_VCI "\0"\
-	"upd_uboot=dhcp;tftp bdi2000/u-boot-mergerbox-xp.bin;"\
-		"protect off all;erase $uboota +0xC0000;"\
-		"cp.b $loadaddr $uboota $filesize\0"\
-	"upd_fpga=dhcp;tftp MergerBox.rbf;erase $fpgadata +$fpgadatasize;"\
-		"cp.b $loadaddr $fpgadata $filesize\0"\
-	"upd_fit=dhcp;tftp MergerBox.fit;erase $fitaddr +0x1000000;"\
-		"cp.b $loadaddr $fitaddr $filesize\0"\
-	"addsqshrfs=set bootargs $bootargs root=/dev/ram ro "\
-		"rootfstype=squashfs\0"\
-	"addubirfs=set bootargs $bootargs ubi.mtd=9 root=ubi0:rootfs rw "\
-		"rootfstype=ubifs\0"\
-	"addusbrfs=set bootargs $bootargs root=/dev/sda1 rw "\
-		"rootfstype=ext3 usb-storage.delay_use=1 rootdelay=3\0"\
-	"netusbboot=bootp;run fpganetload fitnetload addusbrfs doboot\0"\
-	"netubiboot= bootp;run fpganetload fitnetload addubirfs doboot\0"\
-	"ubiboot=run fitprep addubirfs;set mv_initrd_ram -;run doboot\0"\
-	"doboot=bootm $mv_kernel_ram $mv_initrd_ram $mv_dtb_ram\0"\
-	"fitprep=imxtract $fitaddr kernel $mv_kernel_ram;"\
-		"imxtract $fitaddr ramdisk $mv_initrd_ram;"\
-		"imxtract $fitaddr fdt $mv_dtb_ram\0"\
-	"fdtprep=fdt addr $mv_dtb_ram;fdt boardsetup\0"\
-	"fitboot=run fitprep fdtprep addsqshrfs doboot\0"\
-	"i2c_init=run i2c_speed init_sdi_tx i2c_init_pll\0"\
-	"i2c_init_pll=i2c mw 65 9 2;i2c mw 65 9 0;i2c mw 65 5 2b;"\
-		"i2c mw 65 7 f;i2c mw 65 8 f;i2c mw 65 11 40;i2c mw 65 12 40;"\
-		"i2c mw 65 13 40; i2c mw 65 14 40; i2c mw 65 a 0\0"\
-	"i2c_speed=i2c dev 0;i2c speed 300000;i2c dev 1;i2c speed 120000\0"\
-	"init_sdi_tx=i2c mw 21 6 0;i2c mw 21 2 0;i2c mw 21 3 0;sleep 1;"\
-		"i2c mw 21 2 ff;i2c mw 21 3 3c\0"\
-	"splashimage=" __stringify(MV_SPLAH_ADDR) "\0"\
-	""
-
-/*
- * FPGA
- */
-#define CONFIG_FPGA_COUNT	1
-#define CONFIG_FPGA
-#define CONFIG_FPGA_ALTERA
-#define CONFIG_FPGA_CYCLON2
-
-#endif
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
deleted file mode 100644
index 1ee4d7cc33..0000000000
--- a/include/configs/MVBLM7.h
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * Copyright (C) Matrix Vision GmbH 2008
- *
- * Matrix Vision mvBlueLYNX-M7 configuration file
- * based on Freescale's MPC8349ITX.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <version.h>
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300	1
-#define CONFIG_MPC834x	1
-#define CONFIG_MPC8343	1
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-#define CONFIG_SYS_IMMR		0xE0000000
-
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_SKIP_HOST_BRIDGE
-#define CONFIG_TSEC_ENET
-#define CONFIG_MPC8XXX_SPI
-#define CONFIG_HARD_SPI
-#define MVBLM7_MMC_CS   0x04000000
-#define CONFIG_MISC_INIT_R
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	100000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	100000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-
-/*
- * DDR Setup
- */
-#undef	CONFIG_SPD_EEPROM
-
-#define CONFIG_SYS_DDR_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_83XX_DDR_USES_CS0	1
-#define CONFIG_SYS_MEMTEST_START	(60<<20)
-#define CONFIG_SYS_MEMTEST_END		(70<<20)
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_SYS_DDRCDR		(DDRCDR_PZ_HIZ \
-					| DDRCDR_NZ_HIZ \
-					| DDRCDR_Q_DRN)
-					/* 0x22000001 */
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
-
-#define CONFIG_SYS_DDR_SIZE		512
-
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014202
-
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
-
-#define CONFIG_SYS_DDR_TIMING_0		0x00260802
-#define CONFIG_SYS_DDR_TIMING_1		0x3837c322
-#define CONFIG_SYS_DDR_TIMING_2		0x0f9848c6
-#define CONFIG_SYS_DDR_TIMING_3		0x00000000
-
-#define CONFIG_SYS_DDR_SDRAM_CFG	0x43080008
-#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
-#define CONFIG_SYS_DDR_INTERVAL		0x02000100
-
-#define CONFIG_SYS_DDR_MODE		0x04040242
-#define CONFIG_SYS_DDR_MODE2		0x00800000
-
-/* Flash */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-
-#define CONFIG_SYS_FLASH_BASE		0xFF800000
-#define CONFIG_SYS_FLASH_SIZE		8
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	256
-
-#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE \
-				| BR_PS_16 \
-				| BR_MS_GPCM \
-				| BR_V)
-#define CONFIG_SYS_OR0_PRELIM	(MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
-				| OR_UPM_XAM \
-				| OR_GPCM_CSNT \
-				| OR_GPCM_ACS_DIV2 \
-				| OR_GPCM_XACS \
-				| OR_GPCM_SCY_15 \
-				| OR_GPCM_TRLX_SET \
-				| OR_GPCM_EHTR_SET \
-				| OR_GPCM_EAD)
-#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_LBLAWAR0_PRELIM	(LBLAWAR_EN | LBLAWAR_8MB)
-
-/*
- * U-Boot memory configuration
- */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#undef	CONFIG_SYS_RAMBOOT
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	\
-			(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
-
-/*
- * Local Bus LCRR and LBCR regs
- *  LCRR:  DLL bypass, Clock divider is 4
- * External Local Bus rate is
- *  CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
- */
-#define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
-#define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_4
-#define CONFIG_SYS_LBC_LBCR	0x00000000
-
-/* LB sdram refresh timer, about 6us */
-#define CONFIG_SYS_LBC_LSRT	0x32000000
-/* LB refresh timer prescal, 266MHz/32*/
-#define CONFIG_SYS_LBC_MRTPR	0x20000000
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_CONSOLE		ttyS0
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR + 0x4600)
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-#define MV_DTB_NAME	"mvblm7.dtb"
-
-/*
- * PCI
- */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000
-#define CONFIG_SYS_PCI1_MMIO_BASE	\
-			(CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
-#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000
-#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS	0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE	0x01000000
-
-#define CONFIG_NET_RETRY_COUNT	3
-
-#define CONFIG_PCI_66M
-#define CONFIG_83XX_CLKIN	66666667
-#define CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW
-
-/* TSEC */
-#define CONFIG_GMII
-#define CONFIG_SYS_VSC8601_SKEWFIX
-#define	CONFIG_SYS_VSC8601_SKEW_TX	3
-#define	CONFIG_SYS_VSC8601_SKEW_RX	3
-
-#define CONFIG_TSEC1
-#define CONFIG_TSEC2
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_TSEC1_NAME	"TSEC0"
-#define CONFIG_FEC1_PHY_NORXERR
-#define CONFIG_SYS_TSEC1_OFFSET	0x24000
-#define CONFIG_SYS_TSEC1	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
-#define TSEC1_PHY_ADDR		0x10
-#define TSEC1_PHYIDX		0
-#define TSEC1_FLAGS		(TSEC_GIGABIT|TSEC_REDUCED)
-
-#define CONFIG_HAS_ETH1
-#define CONFIG_TSEC2_NAME	"TSEC1"
-#define CONFIG_FEC2_PHY_NORXERR
-#define CONFIG_SYS_TSEC2_OFFSET	0x25000
-#define CONFIG_SYS_TSEC2	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
-#define TSEC2_PHY_ADDR		0x11
-#define TSEC2_PHYIDX		0
-#define TSEC2_FLAGS		(TSEC_GIGABIT|TSEC_REDUCED)
-
-#define CONFIG_ETHPRIME		"TSEC0"
-
-#define CONFIG_BOOTP_VENDOREX
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_NTPSERVER
-#define CONFIG_BOOTP_RANDOM_DELAY
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_LIB_RAND
-
-/* USB */
-#define CONFIG_SYS_USB_HOST
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_HAS_FSL_DR_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
-/*
- * Environment
- */
-#undef  CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		0xFF800000
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x2000
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-#define CONFIG_LOADS_ECHO
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_FPGA
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_USB
-#define CONFIG_DOS_PARTITION
-
-#undef CONFIG_WATCHDOG
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE	/* add autocompletion support   */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR	0x200000
-
-#define CONFIG_SYS_PROMPT	"mvBL-M7> "
-#define CONFIG_SYS_CBSIZE	256
-
-#define CONFIG_SYS_PBSIZE	\
-			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-				/* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)
-
-#define CONFIG_SYS_HRCW_LOW	0x0
-#define CONFIG_SYS_HRCW_HIGH	0x0
-
-/*
- * System performance
- */
-#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
-#define CONFIG_SYS_ACR_RPTCNT	3	/* Arbiter repeat count (0-7) */
-#define CONFIG_SYS_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
-#define CONFIG_SYS_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
-
-/* clocking */
-#define CONFIG_SYS_SCCR_ENCCM		0
-#define CONFIG_SYS_SCCR_USBMPHCM	0
-#define	CONFIG_SYS_SCCR_USBDRCM	2
-#define CONFIG_SYS_SCCR_TSEC1CM	1
-#define CONFIG_SYS_SCCR_TSEC2CM	1
-
-#define CONFIG_SYS_SICRH	0x1fef0003
-#define CONFIG_SYS_SICRL	(SICRL_LDP_A | SICRL_USB1 | SICRL_USB0)
-
-#define CONFIG_SYS_HID0_INIT	0x000000000
-#define CONFIG_SYS_HID0_FINAL	(CONFIG_SYS_HID0_INIT | \
-				 HID0_ENABLE_INSTRUCTION_CACHE)
-
-#define CONFIG_SYS_HID2	HID2_HBE
-#define CONFIG_HIGH_BATS	1
-
-/* DDR  */
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE \
-				| BATL_PP_RW \
-				| BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-
-/* PCI  */
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_BASE \
-				| BATL_PP_RW \
-				| BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_PCI1_MEM_BASE \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_MMIO_BASE \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI1_MMIO_BASE \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-
-/* no PCI2 */
-#define CONFIG_SYS_IBAT3L	0
-#define CONFIG_SYS_IBAT3U	0
-#define CONFIG_SYS_IBAT4L	0
-#define CONFIG_SYS_IBAT4U	0
-
-/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
-#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_IMMR \
-				| BATL_PP_RW \
-				| BATL_CACHEINHIBIT \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_IMMR \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-
-/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */
-#define CONFIG_SYS_IBAT6L	(0xF0000000 \
-				| BATL_PP_RW \
-				| BATL_MEMCOHERENCE \
-				| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT6U	(0xF0000000 \
-				| BATU_BL_256M \
-				| BATU_VS \
-				| BATU_VP)
-#define CONFIG_SYS_IBAT7L	0
-#define CONFIG_SYS_IBAT7U	0
-
-#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
-#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
-#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
-#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
-#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
-#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
-#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
-#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
-
-/*
- * Environment Configuration
- */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_NETDEV		eth0
-
-/* Default path and filenames */
-#define CONFIG_BOOTDELAY		5
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_STOP_STR	"s"
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_RESET_TO_RETRY		1000
-
-#define MV_CI			"mvBL-M7"
-#define MV_VCI			"mvBL-M7"
-#define MV_FPGA_DATA		0xfff40000
-#define MV_FPGA_SIZE		0
-#define MV_KERNEL_ADDR		0xff810000
-#define MV_INITRD_ADDR		0xffb00000
-#define MV_SCRIPT_ADDR		0xff804000
-#define MV_SCRIPT_ADDR2		0xff806000
-#define MV_DTB_ADDR		0xff808000
-#define MV_INITRD_LENGTH	0x00400000
-
-#define CONFIG_SHOW_BOOT_PROGRESS 1
-
-#define MV_KERNEL_ADDR_RAM	0x00100000
-#define MV_DTB_ADDR_RAM		0x00600000
-#define MV_INITRD_ADDR_RAM	0x01000000
-
-#define CONFIG_BOOTCOMMAND	"if imi ${script_addr}; "		\
-					"then source ${script_addr}; "	\
-					"else source ${script_addr2}; "	\
-				"fi;"
-#define CONFIG_BOOTARGS		"root=/dev/ram ro rootfstype=squashfs"
-
-#define CONFIG_EXTRA_ENV_SETTINGS				\
-	"console_nr=0\0"					\
-	"baudrate=" __stringify(CONFIG_BAUDRATE) "\0"		\
-	"stdin=serial\0"					\
-	"stdout=serial\0"					\
-	"stderr=serial\0"					\
-	"fpga=0\0"						\
-	"fpgadata=" __stringify(MV_FPGA_DATA) "\0"			\
-	"fpgadatasize=" __stringify(MV_FPGA_SIZE) "\0"		\
-	"script_addr=" __stringify(MV_SCRIPT_ADDR) "\0"		\
-	"script_addr2=" __stringify(MV_SCRIPT_ADDR2) "\0"		\
-	"mv_kernel_addr=" __stringify(MV_KERNEL_ADDR) "\0"		\
-	"mv_kernel_addr_ram=" __stringify(MV_KERNEL_ADDR_RAM) "\0"	\
-	"mv_initrd_addr=" __stringify(MV_INITRD_ADDR) "\0"		\
-	"mv_initrd_addr_ram=" __stringify(MV_INITRD_ADDR_RAM) "\0"	\
-	"mv_initrd_length=" __stringify(MV_INITRD_LENGTH) "\0"	\
-	"mv_dtb_addr=" __stringify(MV_DTB_ADDR) "\0"			\
-	"mv_dtb_addr_ram=" __stringify(MV_DTB_ADDR_RAM) "\0"		\
-	"dtb_name=" __stringify(MV_DTB_NAME) "\0"			\
-	"mv_version=" U_BOOT_VERSION "\0"			\
-	"dhcp_client_id=" MV_CI "\0"				\
-	"dhcp_vendor-class-identifier=" MV_VCI "\0"		\
-	"netretry=no\0"						\
-	"use_static_ipaddr=no\0"				\
-	"static_ipaddr=192.168.90.10\0"				\
-	"static_netmask=255.255.255.0\0"			\
-	"static_gateway=0.0.0.0\0"				\
-	"initrd_name=uInitrd.mvBL-M7-rfs\0"			\
-	"zcip=no\0"						\
-	"netboot=yes\0"						\
-	"mvtest=Ff\0"						\
-	"tried_bootfromflash=no\0"				\
-	"tried_bootfromnet=no\0"				\
-	"bootfile=mvblm72625.boot\0"				\
-	"use_dhcp=yes\0"					\
-	"gev_start=yes\0"					\
-	"mvbcdma_debug=0\0"					\
-	"mvbcia_debug=0\0"					\
-	"propdev_debug=0\0"					\
-	"gevss_debug=0\0"					\
-	"watchdog=0\0"						\
-	"usb_dr_mode=host\0"					\
-	"sensor_cnt=2\0"					\
-	""
-
-#define CONFIG_FPGA_COUNT	1
-#define CONFIG_FPGA
-#define CONFIG_FPGA_ALTERA
-#define CONFIG_FPGA_CYCLON2
-
-#endif