Merge branch 'master' of git://git.denx.de/u-boot-usb

16 files changed, 1648 insertions, 45 deletions

diff --git a/README b/README
index 33bda8c929..ac1ec44d15 100644
--- a/README
+++ b/README
@@ -1261,6 +1261,9 @@ The following options need to be configured:
 		CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the
 		txfilltuning field in the EHCI controller on reset.
 
+		CONFIG_USB_HUB_MIN_POWER_ON_DELAY defines the minimum
+		interval for usb hub power-on delay.(minimum 100msec)
+
 - USB Device:
 		Define the below if you wish to use the USB console.
 		Once firmware is rebuilt from a serial console issue the
diff --git a/common/usb_hub.c b/common/usb_hub.c
index 0d79ec3ea8..774ba6387a 100644
--- a/common/usb_hub.c
+++ b/common/usb_hub.c
@@ -53,6 +53,10 @@
 #include <asm/4xx_pci.h>
 #endif
 
+#ifndef CONFIG_USB_HUB_MIN_POWER_ON_DELAY
+#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY	100
+#endif
+
 #define USB_BUFSIZ	512
 
 static struct usb_hub_device hub_dev[USB_MAX_HUB];
@@ -148,8 +152,8 @@ static void usb_hub_power_on(struct usb_hub_device *hub)
 		debug("port %d returns %lX\n", i + 1, dev->status);
 	}
 
-	/* Wait at least 100 msec for power to become stable */
-	mdelay(max(pgood_delay, (unsigned)100));
+	/* Wait for power to become stable */
+	mdelay(max(pgood_delay, CONFIG_USB_HUB_MIN_POWER_ON_DELAY));
 }
 
 void usb_hub_reset(void)
@@ -485,7 +489,11 @@ static int usb_hub_configure(struct usb_device *dev)
 			      i + 1, portstatus);
 			usb_clear_port_feature(dev, i + 1,
 						USB_PORT_FEAT_C_ENABLE);
-
+			/*
+			 * The following hack causes a ghost device problem
+			 * to Faraday EHCI
+			 */
+#ifndef CONFIG_USB_EHCI_FARADAY
 			/* EM interference sometimes causes bad shielded USB
 			 * devices to be shutdown by the hub, this hack enables
 			 * them again. Works at least with mouse driver */
@@ -497,6 +505,7 @@ static int usb_hub_configure(struct usb_device *dev)
 				      "re-enabling...\n", i + 1);
 				      usb_hub_port_connect_change(dev, i);
 			}
+#endif
 		}
 		if (portstatus & USB_PORT_STAT_SUSPEND) {
 			debug("port %d suspend change\n", i + 1);
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index b962849920..3174b5e1bf 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -461,8 +461,13 @@ static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum)
 	usb_set_idle(dev, iface->desc.bInterfaceNumber, REPEAT_RATE, 0);
 
 	debug("USB KBD: enable interrupt pipe...\n");
-	usb_submit_int_msg(dev, pipe, data->new, maxp > 8 ? 8 : maxp,
-				ep->bInterval);
+	if (usb_submit_int_msg(dev, pipe, data->new, maxp > 8 ? 8 : maxp,
+			       ep->bInterval) < 0) {
+		printf("Failed to get keyboard state from device %04x:%04x\n",
+		       dev->descriptor.idVendor, dev->descriptor.idProduct);
+		/* Abort, we don't want to use that non-functional keyboard. */
+		return 0;
+	}
 
 	/* Success. */
 	return 1;
@@ -496,6 +501,7 @@ int drv_usb_kbd_init(void)
 		if (old_dev) {
 			/* Already registered, just return ok. */
 			debug("USB KBD: is already registered.\n");
+			usb_kbd_deregister();
 			return 1;
 		}
 
diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c
index 75ec8f7881..76624b9256 100644
--- a/drivers/usb/eth/asix.c
+++ b/drivers/usb/eth/asix.c
@@ -407,46 +407,40 @@ static int asix_basic_reset(struct ueth_data *dev)
 	rx_ctl = asix_read_rx_ctl(dev);
 	debug("RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
 
-	return 0;
-}
-
-/*
- * Asix callbacks
- */
-static int asix_init(struct eth_device *eth, bd_t *bd)
-{
-	struct ueth_data	*dev = (struct ueth_data *)eth->priv;
-	int timeout = 0;
-#define TIMEOUT_RESOLUTION 50	/* ms */
-	int link_detected;
-
-	debug("** %s()\n", __func__);
-
 	dev->phy_id = asix_get_phy_addr(dev);
 	if (dev->phy_id < 0)
 		debug("Failed to read phy id\n");
 
-	if (asix_sw_reset(dev, AX_SWRESET_PRL) < 0)
-		goto out_err;
-
-	if (asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL) < 0)
-		goto out_err;
-
 	asix_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET);
 	asix_mdio_write(dev, dev->phy_id, MII_ADVERTISE,
 			ADVERTISE_ALL | ADVERTISE_CSMA);
 	mii_nway_restart(dev);
 
 	if (asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT) < 0)
-		goto out_err;
+		return -1;
 
 	if (asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
 				AX88772_IPG2_DEFAULT, 0, NULL) < 0) {
 		debug("Write IPG,IPG1,IPG2 failed\n");
-		goto out_err;
+		return -1;
 	}
 
+	return 0;
+}
+
+/*
+ * Asix callbacks
+ */
+static int asix_init(struct eth_device *eth, bd_t *bd)
+{
+	struct ueth_data	*dev = (struct ueth_data *)eth->priv;
+	int timeout = 0;
+#define TIMEOUT_RESOLUTION 50	/* ms */
+	int link_detected;
+
+	debug("** %s()\n", __func__);
+
 	if (asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL) < 0)
 		goto out_err;
 
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index e545b6be6b..432cf178cf 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -35,6 +35,7 @@ endif
 # new USB gadget layer dependencies
 ifdef CONFIG_USB_GADGET
 COBJS-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o
+COBJS-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
 COBJS-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o
 COBJS-$(CONFIG_DFU_FUNCTION) += f_dfu.o
 endif
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 2c5600ed52..f30778a163 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1098,4 +1098,5 @@ void usb_composite_unregister(struct usb_composite_driver *driver)
 	if (composite != driver)
 		return;
 	usb_gadget_unregister_driver(&composite_driver);
+	composite = NULL;
 }
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index c28866f7d3..45bc132aef 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2261,7 +2261,8 @@ reset:
 	if (rc)
 		goto reset;
 	fsg->bulk_out_enabled = 1;
-	common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+	common->bulk_out_maxpacket =
+				le16_to_cpu(get_unaligned(&d->wMaxPacketSize));
 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 
 	/* Allocate the requests */
diff --git a/drivers/usb/gadget/fotg210.c b/drivers/usb/gadget/fotg210.c
new file mode 100644
index 0000000000..d003331bae
--- /dev/null
+++ b/drivers/usb/gadget/fotg210.c
@@ -0,0 +1,948 @@
+/*
+ * Faraday USB 2.0 OTG Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <config.h>
+#include <net.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <usb/fotg210.h>
+
+#define CFG_NUM_ENDPOINTS		4
+#define CFG_EP0_MAX_PACKET_SIZE	64
+#define CFG_EPX_MAX_PACKET_SIZE	512
+
+#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 2) /* 250 ms */
+
+struct fotg210_chip;
+
+struct fotg210_ep {
+	struct usb_ep ep;
+
+	uint maxpacket;
+	uint id;
+	uint stopped;
+
+	struct list_head                      queue;
+	struct fotg210_chip                  *chip;
+	const struct usb_endpoint_descriptor *desc;
+};
+
+struct fotg210_request {
+	struct usb_request req;
+	struct list_head   queue;
+	struct fotg210_ep *ep;
+};
+
+struct fotg210_chip {
+	struct usb_gadget         gadget;
+	struct usb_gadget_driver *driver;
+	struct fotg210_regs      *regs;
+	uint8_t                   irq;
+	uint16_t                  addr;
+	int                       pullup;
+	enum usb_device_state     state;
+	struct fotg210_ep         ep[1 + CFG_NUM_ENDPOINTS];
+};
+
+static struct usb_endpoint_descriptor ep0_desc = {
+	.bLength = sizeof(struct usb_endpoint_descriptor),
+	.bDescriptorType = USB_DT_ENDPOINT,
+	.bEndpointAddress = USB_DIR_IN,
+	.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+};
+
+static inline int fifo_to_ep(struct fotg210_chip *chip, int id, int in)
+{
+	return (id < 0) ? 0 : ((id & 0x03) + 1);
+}
+
+static inline int ep_to_fifo(struct fotg210_chip *chip, int id)
+{
+	return (id <= 0) ? -1 : ((id - 1) & 0x03);
+}
+
+static inline int ep_reset(struct fotg210_chip *chip, uint8_t ep_addr)
+{
+	int ep = ep_addr & USB_ENDPOINT_NUMBER_MASK;
+	struct fotg210_regs *regs = chip->regs;
+
+	if (ep_addr & USB_DIR_IN) {
+		/* reset endpoint */
+		setbits_le32(&regs->iep[ep - 1], IEP_RESET);
+		mdelay(1);
+		clrbits_le32(&regs->iep[ep - 1], IEP_RESET);
+		/* clear endpoint stall */
+		clrbits_le32(&regs->iep[ep - 1], IEP_STALL);
+	} else {
+		/* reset endpoint */
+		setbits_le32(&regs->oep[ep - 1], OEP_RESET);
+		mdelay(1);
+		clrbits_le32(&regs->oep[ep - 1], OEP_RESET);
+		/* clear endpoint stall */
+		clrbits_le32(&regs->oep[ep - 1], OEP_STALL);
+	}
+
+	return 0;
+}
+
+static int fotg210_reset(struct fotg210_chip *chip)
+{
+	struct fotg210_regs *regs = chip->regs;
+	uint32_t i;
+
+	chip->state = USB_STATE_POWERED;
+
+	/* chip enable */
+	writel(DEVCTRL_EN, &regs->dev_ctrl);
+
+	/* device address reset */
+	chip->addr = 0;
+	writel(0, &regs->dev_addr);
+
+	/* set idle counter to 7ms */
+	writel(7, &regs->idle);
+
+	/* disable all interrupts */
+	writel(IMR_MASK, &regs->imr);
+	writel(GIMR_MASK, &regs->gimr);
+	writel(GIMR0_MASK, &regs->gimr0);
+	writel(GIMR1_MASK, &regs->gimr1);
+	writel(GIMR2_MASK, &regs->gimr2);
+
+	/* clear interrupts */
+	writel(ISR_MASK, &regs->isr);
+	writel(0, &regs->gisr);
+	writel(0, &regs->gisr0);
+	writel(0, &regs->gisr1);
+	writel(0, &regs->gisr2);
+
+	/* chip reset */
+	setbits_le32(&regs->dev_ctrl, DEVCTRL_RESET);
+	mdelay(10);
+	if (readl(&regs->dev_ctrl) & DEVCTRL_RESET) {
+		printf("fotg210: chip reset failed\n");
+		return -1;
+	}
+
+	/* CX FIFO reset */
+	setbits_le32(&regs->cxfifo, CXFIFO_CXFIFOCLR);
+	mdelay(10);
+	if (readl(&regs->cxfifo) & CXFIFO_CXFIFOCLR) {
+		printf("fotg210: ep0 fifo reset failed\n");
+		return -1;
+	}
+
+	/* create static ep-fifo map (EP1 <-> FIFO0, EP2 <-> FIFO1 ...) */
+	writel(EPMAP14_DEFAULT, &regs->epmap14);
+	writel(EPMAP58_DEFAULT, &regs->epmap58);
+	writel(FIFOMAP_DEFAULT, &regs->fifomap);
+	writel(0, &regs->fifocfg);
+	for (i = 0; i < 8; ++i) {
+		writel(CFG_EPX_MAX_PACKET_SIZE, &regs->iep[i]);
+		writel(CFG_EPX_MAX_PACKET_SIZE, &regs->oep[i]);
+	}
+
+	/* FIFO reset */
+	for (i = 0; i < 4; ++i) {
+		writel(FIFOCSR_RESET, &regs->fifocsr[i]);
+		mdelay(10);
+		if (readl(&regs->fifocsr[i]) & FIFOCSR_RESET) {
+			printf("fotg210: fifo%d reset failed\n", i);
+			return -1;
+		}
+	}
+
+	/* enable only device interrupt and triggered at level-high */
+	writel(IMR_IRQLH | IMR_HOST | IMR_OTG, &regs->imr);
+	writel(ISR_MASK, &regs->isr);
+	/* disable EP0 IN/OUT interrupt */
+	writel(GIMR0_CXOUT | GIMR0_CXIN, &regs->gimr0);
+	/* disable EPX IN+SPK+OUT interrupts */
+	writel(GIMR1_MASK, &regs->gimr1);
+	/* disable wakeup+idle+dma+zlp interrupts */
+	writel(GIMR2_WAKEUP | GIMR2_IDLE | GIMR2_DMAERR | GIMR2_DMAFIN
+		| GIMR2_ZLPRX | GIMR2_ZLPTX, &regs->gimr2);
+	/* enable all group interrupt */
+	writel(0, &regs->gimr);
+
+	/* suspend delay = 3 ms */
+	writel(3, &regs->idle);
+
+	/* turn-on device interrupts */
+	setbits_le32(&regs->dev_ctrl, DEVCTRL_GIRQ_EN);
+
+	return 0;
+}
+
+static inline int fotg210_cxwait(struct fotg210_chip *chip, uint32_t mask)
+{
+	struct fotg210_regs *regs = chip->regs;
+	int ret = -1;
+	ulong ts;
+
+	for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+		if ((readl(&regs->cxfifo) & mask) != mask)
+			continue;
+		ret = 0;
+		break;
+	}
+
+	if (ret)
+		printf("fotg210: cx/ep0 timeout\n");
+
+	return ret;
+}
+
+static int fotg210_dma(struct fotg210_ep *ep, struct fotg210_request *req)
+{
+	struct fotg210_chip *chip = ep->chip;
+	struct fotg210_regs *regs = chip->regs;
+	uint32_t tmp, ts;
+	uint8_t *buf  = req->req.buf + req->req.actual;
+	uint32_t len  = req->req.length - req->req.actual;
+	int fifo = ep_to_fifo(chip, ep->id);
+	int ret = -EBUSY;
+
+	/* 1. init dma buffer */
+	if (len > ep->maxpacket)
+		len = ep->maxpacket;
+
+	/* 2. wait for dma ready (hardware) */
+	for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+		if (!(readl(&regs->dma_ctrl) & DMACTRL_START)) {
+			ret = 0;
+			break;
+		}
+	}
+	if (ret) {
+		printf("fotg210: dma busy\n");
+		req->req.status = ret;
+		return ret;
+	}
+
+	/* 3. DMA target setup */
+	if (ep->desc->bEndpointAddress & USB_DIR_IN)
+		flush_dcache_range((ulong)buf, (ulong)buf + len);
+	else
+		invalidate_dcache_range((ulong)buf, (ulong)buf + len);
+
+	writel(virt_to_phys(buf), &regs->dma_addr);
+
+	if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+		if (ep->id == 0) {
+			/* Wait until cx/ep0 fifo empty */
+			fotg210_cxwait(chip, CXFIFO_CXFIFOE);
+			writel(DMAFIFO_CX, &regs->dma_fifo);
+		} else {
+			/* Wait until epx fifo empty */
+			fotg210_cxwait(chip, CXFIFO_FIFOE(fifo));
+			writel(DMAFIFO_FIFO(fifo), &regs->dma_fifo);
+		}
+		writel(DMACTRL_LEN(len) | DMACTRL_MEM2FIFO, &regs->dma_ctrl);
+	} else {
+		uint32_t blen;
+
+		if (ep->id == 0) {
+			writel(DMAFIFO_CX, &regs->dma_fifo);
+			do {
+				blen = CXFIFO_BYTES(readl(&regs->cxfifo));
+			} while (blen < len);
+		} else {
+			writel(DMAFIFO_FIFO(fifo), &regs->dma_fifo);
+			blen = FIFOCSR_BYTES(readl(&regs->fifocsr[fifo]));
+		}
+		len  = (len < blen) ? len : blen;
+		writel(DMACTRL_LEN(len) | DMACTRL_FIFO2MEM, &regs->dma_ctrl);
+	}
+
+	/* 4. DMA start */
+	setbits_le32(&regs->dma_ctrl, DMACTRL_START);
+
+	/* 5. DMA wait */
+	ret = -EBUSY;
+	for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+		tmp = readl(&regs->gisr2);
+		/* DMA complete */
+		if (tmp & GISR2_DMAFIN) {
+			ret = 0;
+			break;
+		}
+		/* DMA error */
+		if (tmp & GISR2_DMAERR) {
+			printf("fotg210: dma error\n");
+			break;
+		}
+		/* resume, suspend, reset */
+		if (tmp & (GISR2_RESUME | GISR2_SUSPEND | GISR2_RESET)) {
+			printf("fotg210: dma reset by host\n");
+			break;
+		}
+	}
+
+	/* 7. DMA target reset */
+	if (ret)
+		writel(DMACTRL_ABORT | DMACTRL_CLRFF, &regs->dma_ctrl);
+
+	writel(0, &regs->gisr2);
+	writel(0, &regs->dma_fifo);
+
+	req->req.status = ret;
+	if (!ret)
+		req->req.actual += len;
+	else
+		printf("fotg210: ep%d dma error(code=%d)\n", ep->id, ret);
+
+	return len;
+}
+
+/*
+ * result of setup packet
+ */
+#define CX_IDLE		0
+#define CX_FINISH	1
+#define CX_STALL	2
+
+static void fotg210_setup(struct fotg210_chip *chip)
+{
+	int id, ret = CX_IDLE;
+	uint32_t tmp[2];
+	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)tmp;
+	struct fotg210_regs *regs = chip->regs;
+
+	/*
+	 * If this is the first Cx 8 byte command,
+	 * we can now query USB mode (high/full speed; USB 2.0/USB 1.0)
+	 */
+	if (chip->state == USB_STATE_POWERED) {
+		chip->state = USB_STATE_DEFAULT;
+		if (readl(&regs->otgcsr) & OTGCSR_DEV_B) {
+			/* Mini-B */
+			if (readl(&regs->dev_ctrl) & DEVCTRL_HS) {
+				puts("fotg210: HS\n");
+				chip->gadget.speed = USB_SPEED_HIGH;
+				/* SOF mask timer = 1100 ticks */
+				writel(SOFMTR_TMR(1100), &regs->sof_mtr);
+			} else {
+				puts("fotg210: FS\n");
+				chip->gadget.speed = USB_SPEED_FULL;
+				/* SOF mask timer = 10000 ticks */
+				writel(SOFMTR_TMR(10000), &regs->sof_mtr);
+			}
+		} else {
+			printf("fotg210: mini-A?\n");
+		}
+	}
+
+	/* switch data port to ep0 */
+	writel(DMAFIFO_CX, &regs->dma_fifo);
+	/* fetch 8 bytes setup packet */
+	tmp[0] = readl(&regs->ep0_data);
+	tmp[1] = readl(&regs->ep0_data);
+	/* release data port */
+	writel(0, &regs->dma_fifo);
+
+	if (req->bRequestType & USB_DIR_IN)
+		ep0_desc.bEndpointAddress = USB_DIR_IN;
+	else
+		ep0_desc.bEndpointAddress = USB_DIR_OUT;
+
+	ret = CX_IDLE;
+
+	if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (req->bRequest) {
+		case USB_REQ_SET_CONFIGURATION:
+			debug("fotg210: set_cfg(%d)\n", req->wValue & 0x00FF);
+			if (!(req->wValue & 0x00FF)) {
+				chip->state = USB_STATE_ADDRESS;
+				writel(chip->addr, &regs->dev_addr);
+			} else {
+				chip->state = USB_STATE_CONFIGURED;
+				writel(chip->addr | DEVADDR_CONF,
+					&regs->dev_addr);
+			}
+			ret = CX_IDLE;
+			break;
+
+		case USB_REQ_SET_ADDRESS:
+			debug("fotg210: set_addr(0x%04X)\n", req->wValue);
+			chip->state = USB_STATE_ADDRESS;
+			chip->addr  = req->wValue & DEVADDR_ADDR_MASK;
+			ret = CX_FINISH;
+			writel(chip->addr, &regs->dev_addr);
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			debug("fotg210: clr_feature(%d, %d)\n",
+				req->bRequestType & 0x03, req->wValue);
+			switch (req->wValue) {
+			case 0:    /* [Endpoint] halt */
+				ep_reset(chip, req->wIndex);
+				ret = CX_FINISH;
+				break;
+			case 1:    /* [Device] remote wake-up */
+			case 2:    /* [Device] test mode */
+			default:
+				ret = CX_STALL;
+				break;
+			}
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			debug("fotg210: set_feature(%d, %d)\n",
+				req->wValue, req->wIndex & 0xf);
+			switch (req->wValue) {
+			case 0:    /* Endpoint Halt */
+				id = req->wIndex & 0xf;
+				setbits_le32(&regs->iep[id - 1], IEP_STALL);
+				setbits_le32(&regs->oep[id - 1], OEP_STALL);
+				ret = CX_FINISH;
+				break;
+			case 1:    /* Remote Wakeup */
+			case 2:    /* Test Mode */
+			default:
+				ret = CX_STALL;
+				break;
+			}
+			break;
+
+		case USB_REQ_GET_STATUS:
+			debug("fotg210: get_status\n");
+			ret = CX_STALL;
+			break;
+
+		case USB_REQ_SET_DESCRIPTOR:
+			debug("fotg210: set_descriptor\n");
+			ret = CX_STALL;
+			break;
+
+		case USB_REQ_SYNCH_FRAME:
+			debug("fotg210: sync frame\n");
+			ret = CX_STALL;
+			break;
+		}
+	} /* if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) */
+
+	if (ret == CX_IDLE && chip->driver->setup) {
+		if (chip->driver->setup(&chip->gadget, req) < 0)
+			ret = CX_STALL;
+		else
+			ret = CX_FINISH;
+	}
+
+	switch (ret) {
+	case CX_FINISH:
+		setbits_le32(&regs->cxfifo, CXFIFO_CXFIN);
+		break;
+
+	case CX_STALL:
+		setbits_le32(&regs->cxfifo, CXFIFO_CXSTALL | CXFIFO_CXFIN);
+		printf("fotg210: cx_stall!\n");
+		break;
+
+	case CX_IDLE:
+		debug("fotg210: cx_idle?\n");
+	default:
+		break;
+	}
+}
+
+/*
+ * fifo - FIFO id
+ * zlp  - zero length packet
+ */
+static void fotg210_recv(struct fotg210_chip *chip, int ep_id)
+{
+	struct fotg210_regs *regs = chip->regs;
+	struct fotg210_ep *ep = chip->ep + ep_id;
+	struct fotg210_request *req;
+	int len;
+
+	if (ep->stopped || (ep->desc->bEndpointAddress & USB_DIR_IN)) {
+		printf("fotg210: ep%d recv, invalid!\n", ep->id);
+		return;
+	}
+
+	if (list_empty(&ep->queue)) {
+		printf("fotg210: ep%d recv, drop!\n", ep->id);
+		return;
+	}
+
+	req = list_first_entry(&ep->queue, struct fotg210_request, queue);
+	len = fotg210_dma(ep, req);
+	if (len < ep->ep.maxpacket || req->req.length <= req->req.actual) {
+		list_del_init(&req->queue);
+		if (req->req.complete)
+			req->req.complete(&ep->ep, &req->req);
+	}
+
+	if (ep->id > 0 && list_empty(&ep->queue)) {
+		setbits_le32(&regs->gimr1,
+			GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id)));
+	}
+}
+
+/*
+ * USB Gadget Layer
+ */
+static int fotg210_ep_enable(
+	struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+	struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+	struct fotg210_chip *chip = ep->chip;
+	struct fotg210_regs *regs = chip->regs;
+	int id = ep_to_fifo(chip, ep->id);
+	int in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0;
+
+	if (!_ep || !desc
+		|| desc->bDescriptorType != USB_DT_ENDPOINT
+		|| le16_to_cpu(desc->wMaxPacketSize) == 0) {
+		printf("fotg210: bad ep or descriptor\n");
+		return -EINVAL;
+	}
+
+	ep->desc = desc;
+	ep->stopped = 0;
+
+	if (in)
+		setbits_le32(&regs->fifomap, FIFOMAP(id, FIFOMAP_IN));
+
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		return -EINVAL;
+
+	case USB_ENDPOINT_XFER_ISOC:
+		setbits_le32(&regs->fifocfg,
+			FIFOCFG(id, FIFOCFG_EN | FIFOCFG_ISOC));
+		break;
+
+	case USB_ENDPOINT_XFER_BULK:
+		setbits_le32(&regs->fifocfg,
+			FIFOCFG(id, FIFOCFG_EN | FIFOCFG_BULK));
+		break;
+
+	case USB_ENDPOINT_XFER_INT:
+		setbits_le32(&regs->fifocfg,
+			FIFOCFG(id, FIFOCFG_EN | FIFOCFG_INTR));
+		break;
+	}
+
+	return 0;
+}
+
+static int fotg210_ep_disable(struct usb_ep *_ep)
+{
+	struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+	struct fotg210_chip *chip = ep->chip;
+	struct fotg210_regs *regs = chip->regs;
+	int id = ep_to_fifo(chip, ep->id);
+
+	ep->desc = NULL;
+	ep->stopped = 1;
+
+	clrbits_le32(&regs->fifocfg, FIFOCFG(id, FIFOCFG_CFG_MASK));
+	clrbits_le32(&regs->fifomap, FIFOMAP(id, FIFOMAP_DIR_MASK));
+
+	return 0;
+}
+
+static struct usb_request *fotg210_ep_alloc_request(
+	struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct fotg210_request *req = malloc(sizeof(*req));
+
+	if (req) {
+		memset(req, 0, sizeof(*req));
+		INIT_LIST_HEAD(&req->queue);
+	}
+	return &req->req;
+}
+
+static void fotg210_ep_free_request(
+	struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct fotg210_request *req;
+
+	req = container_of(_req, struct fotg210_request, req);
+	free(req);
+}
+
+static int fotg210_ep_queue(
+	struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+	struct fotg210_chip *chip = ep->chip;
+	struct fotg210_regs *regs = chip->regs;
+	struct fotg210_request *req;
+
+	req = container_of(_req, struct fotg210_request, req);
+	if (!_req || !_req->complete || !_req->buf
+		|| !list_empty(&req->queue)) {
+		printf("fotg210: invalid request to ep%d\n", ep->id);
+		return -EINVAL;
+	}
+
+	if (!chip || chip->state == USB_STATE_SUSPENDED) {
+		printf("fotg210: request while chip suspended\n");
+		return -EINVAL;
+	}
+
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+
+	if (req->req.length == 0) {
+		req->req.status = 0;
+		if (req->req.complete)
+			req->req.complete(&ep->ep, &req->req);
+		return 0;
+	}
+
+	if (ep->id == 0) {
+		do {
+			int len = fotg210_dma(ep, req);
+			if (len < ep->ep.maxpacket)
+				break;
+			if (ep->desc->bEndpointAddress & USB_DIR_IN)
+				udelay(100);
+		} while (req->req.length > req->req.actual);
+	} else {
+		if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+			do {
+				int len = fotg210_dma(ep, req);
+				if (len < ep->ep.maxpacket)
+					break;
+			} while (req->req.length > req->req.actual);
+		} else {
+			list_add_tail(&req->queue, &ep->queue);
+			clrbits_le32(&regs->gimr1,
+				GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id)));
+		}
+	}
+
+	if (ep->id == 0 || (ep->desc->bEndpointAddress & USB_DIR_IN)) {
+		if (req->req.complete)
+			req->req.complete(&ep->ep, &req->req);
+	}
+
+	return 0;
+}
+
+static int fotg210_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+	struct fotg210_request *req;
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+	if (&req->req != _req)
+		return -EINVAL;
+
+	/* remove the request */
+	list_del_init(&req->queue);
+
+	/* update status & invoke complete callback */
+	if (req->req.status == -EINPROGRESS) {
+		req->req.status = -ECONNRESET;
+		if (req->req.complete)
+			req->req.complete(_ep, &req->req);
+	}
+
+	return 0;
+}
+
+static int fotg210_ep_halt(struct usb_ep *_ep, int halt)
+{
+	struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
+	struct fotg210_chip *chip = ep->chip;
+	struct fotg210_regs *regs = chip->regs;
+	int ret = -1;
+
+	debug("fotg210: ep%d halt=%d\n", ep->id, halt);
+
+	/* Endpoint STALL */
+	if (ep->id > 0 && ep->id <= CFG_NUM_ENDPOINTS) {
+		if (halt) {
+			/* wait until all ep fifo empty */
+			fotg210_cxwait(chip, 0xf00);
+			/* stall */
+			if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+				setbits_le32(&regs->iep[ep->id - 1],
+					IEP_STALL);
+			} else {
+				setbits_le32(&regs->oep[ep->id - 1],
+					OEP_STALL);
+			}
+		} else {
+			if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+				clrbits_le32(&regs->iep[ep->id - 1],
+					IEP_STALL);
+			} else {
+				clrbits_le32(&regs->oep[ep->id - 1],
+					OEP_STALL);
+			}
+		}
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/*
+ * activate/deactivate link with host.
+ */
+static void pullup(struct fotg210_chip *chip, int is_on)
+{
+	struct fotg210_regs *regs = chip->regs;
+
+	if (is_on) {
+		if (!chip->pullup) {
+			chip->state = USB_STATE_POWERED;
+			chip->pullup = 1;
+			/* enable the chip */
+			setbits_le32(&regs->dev_ctrl, DEVCTRL_EN);
+			/* clear unplug bit (BIT0) */
+			clrbits_le32(&regs->phy_tmsr, PHYTMSR_UNPLUG);
+		}
+	} else {
+		chip->state = USB_STATE_NOTATTACHED;
+		chip->pullup = 0;
+		chip->addr = 0;
+		writel(chip->addr, &regs->dev_addr);
+		/* set unplug bit (BIT0) */
+		setbits_le32(&regs->phy_tmsr, PHYTMSR_UNPLUG);
+		/* disable the chip */
+		clrbits_le32(&regs->dev_ctrl, DEVCTRL_EN);
+	}
+}
+
+static int fotg210_pullup(struct usb_gadget *_gadget, int is_on)
+{
+	struct fotg210_chip *chip;
+
+	chip = container_of(_gadget, struct fotg210_chip, gadget);
+
+	debug("fotg210: pullup=%d\n", is_on);
+
+	pullup(chip, is_on);
+
+	return 0;
+}
+
+static int fotg210_get_frame(struct usb_gadget *_gadget)
+{
+	struct fotg210_chip *chip;
+	struct fotg210_regs *regs;
+
+	chip = container_of(_gadget, struct fotg210_chip, gadget);
+	regs = chip->regs;
+
+	return SOFFNR_FNR(readl(&regs->sof_fnr));
+}
+
+static struct usb_gadget_ops fotg210_gadget_ops = {
+	.get_frame = fotg210_get_frame,
+	.pullup = fotg210_pullup,
+};
+
+static struct usb_ep_ops fotg210_ep_ops = {
+	.enable         = fotg210_ep_enable,
+	.disable        = fotg210_ep_disable,
+	.queue          = fotg210_ep_queue,
+	.dequeue        = fotg210_ep_dequeue,
+	.set_halt       = fotg210_ep_halt,
+	.alloc_request  = fotg210_ep_alloc_request,
+	.free_request   = fotg210_ep_free_request,
+};
+
+static struct fotg210_chip controller = {
+	.regs = (void __iomem *)CONFIG_FOTG210_BASE,
+	.gadget = {
+		.name = "fotg210_udc",
+		.ops = &fotg210_gadget_ops,
+		.ep0 = &controller.ep[0].ep,
+		.speed = USB_SPEED_UNKNOWN,
+		.is_dualspeed = 1,
+		.is_otg = 0,
+		.is_a_peripheral = 0,
+		.b_hnp_enable = 0,
+		.a_hnp_support = 0,
+		.a_alt_hnp_support = 0,
+	},
+	.ep[0] = {
+		.id = 0,
+		.ep = {
+			.name  = "ep0",
+			.ops   = &fotg210_ep_ops,
+		},
+		.desc      = &ep0_desc,
+		.chip      = &controller,
+		.maxpacket = CFG_EP0_MAX_PACKET_SIZE,
+	},
+	.ep[1] = {
+		.id = 1,
+		.ep = {
+			.name  = "ep1",
+			.ops   = &fotg210_ep_ops,
+		},
+		.chip      = &controller,
+		.maxpacket = CFG_EPX_MAX_PACKET_SIZE,
+	},
+	.ep[2] = {
+		.id = 2,
+		.ep = {
+			.name  = "ep2",
+			.ops   = &fotg210_ep_ops,
+		},
+		.chip      = &controller,
+		.maxpacket = CFG_EPX_MAX_PACKET_SIZE,
+	},
+	.ep[3] = {
+		.id = 3,
+		.ep = {
+			.name  = "ep3",
+			.ops   = &fotg210_ep_ops,
+		},
+		.chip      = &controller,
+		.maxpacket = CFG_EPX_MAX_PACKET_SIZE,
+	},
+	.ep[4] = {
+		.id = 4,
+		.ep = {
+			.name  = "ep4",
+			.ops   = &fotg210_ep_ops,
+		},
+		.chip      = &controller,
+		.maxpacket = CFG_EPX_MAX_PACKET_SIZE,
+	},
+};
+
+int usb_gadget_handle_interrupts(void)
+{
+	struct fotg210_chip *chip = &controller;
+	struct fotg210_regs *regs = chip->regs;
+	uint32_t id, st, isr, gisr;
+
+	isr  = readl(&regs->isr) & (~readl(&regs->imr));
+	gisr = readl(&regs->gisr) & (~readl(&regs->gimr));
+	if (!(isr & ISR_DEV) || !gisr)
+		return 0;
+
+	writel(ISR_DEV, &regs->isr);
+
+	/* CX interrupts */
+	if (gisr & GISR_GRP0) {
+		st = readl(&regs->gisr0);
+		writel(0, &regs->gisr0);
+
+		if (st & GISR0_CXERR)
+			printf("fotg210: cmd error\n");
+
+		if (st & GISR0_CXABORT)
+			printf("fotg210: cmd abort\n");
+
+		if (st & GISR0_CXSETUP)    /* setup */
+			fotg210_setup(chip);
+		else if (st & GISR0_CXEND) /* command finish */
+			setbits_le32(&regs->cxfifo, CXFIFO_CXFIN);
+	}
+
+	/* FIFO interrupts */
+	if (gisr & GISR_GRP1) {
+		st = readl(&regs->gisr1);
+		for (id = 0; id < 4; ++id) {
+			if (st & GISR1_RX_FIFO(id))
+				fotg210_recv(chip, fifo_to_ep(chip, id, 0));
+		}
+	}
+
+	/* Device Status Interrupts */
+	if (gisr & GISR_GRP2) {
+		st = readl(&regs->gisr2);
+		writel(0, &regs->gisr2);
+
+		if (st & GISR2_RESET)
+			printf("fotg210: reset by host\n");
+		else if (st & GISR2_SUSPEND)
+			printf("fotg210: suspend/removed\n");
+		else if (st & GISR2_RESUME)
+			printf("fotg210: resume\n");
+
+		/* Errors */
+		if (st & GISR2_ISOCERR)
+			printf("fotg210: iso error\n");
+		if (st & GISR2_ISOCABT)
+			printf("fotg210: iso abort\n");
+		if (st & GISR2_DMAERR)
+			printf("fotg210: dma error\n");
+	}
+
+	return 0;
+}
+
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	int i, ret = 0;
+	struct fotg210_chip *chip = &controller;
+
+	if (!driver    || !driver->bind || !driver->setup) {
+		puts("fotg210: bad parameter.\n");
+		return -EINVAL;
+	}
+
+	INIT_LIST_HEAD(&chip->gadget.ep_list);
+	for (i = 0; i < CFG_NUM_ENDPOINTS + 1; ++i) {
+		struct fotg210_ep *ep = chip->ep + i;
+
+		ep->ep.maxpacket = ep->maxpacket;
+		INIT_LIST_HEAD(&ep->queue);
+
+		if (ep->id == 0) {
+			ep->stopped = 0;
+		} else {
+			ep->stopped = 1;
+			list_add_tail(&ep->ep.ep_list, &chip->gadget.ep_list);
+		}
+	}
+
+	if (fotg210_reset(chip)) {
+		puts("fotg210: reset failed.\n");
+		return -EINVAL;
+	}
+
+	ret = driver->bind(&chip->gadget);
+	if (ret) {
+		debug("fotg210: driver->bind() returned %d\n", ret);
+		return ret;
+	}
+	chip->driver = driver;
+
+	return ret;
+}
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct fotg210_chip *chip = &controller;
+
+	driver->unbind(&chip->gadget);
+	chip->driver = NULL;
+
+	pullup(chip, 0);
+
+	return 0;
+}
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index e5701422fa..f038747e63 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -150,6 +150,12 @@
 #define gadget_is_mv(g)        0
 #endif
 
+#ifdef CONFIG_USB_GADGET_FOTG210
+#define gadget_is_fotg210(g)        (!strcmp("fotg210_udc", (g)->name))
+#else
+#define gadget_is_fotg210(g)        0
+#endif
+
 /*
  * CONFIG_USB_GADGET_SX2
  * CONFIG_USB_GADGET_AU1X00
@@ -215,5 +221,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x20;
 	else if (gadget_is_mv(gadget))
 		return 0x21;
+	else if (gadget_is_fotg210(gadget))
+		return 0x22;
 	return -ENOENT;
 }
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 9ce98f0768..085503dbe8 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -314,7 +314,8 @@ static int pxa25x_ep_enable(struct usb_ep *_ep,
 	if (!_ep || !desc || ep->desc || _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
-			|| ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
+			|| ep->fifo_size <
+			   le16_to_cpu(get_unaligned(&desc->wMaxPacketSize))) {
 		printf("%s, bad ep or descriptor\n", __func__);
 		return -EINVAL;
 	}
@@ -329,9 +330,9 @@ static int pxa25x_ep_enable(struct usb_ep *_ep,
 
 	/* hardware _could_ do smaller, but driver doesn't */
 	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
-				&& le16_to_cpu(desc->wMaxPacketSize)
+			&& le16_to_cpu(get_unaligned(&desc->wMaxPacketSize))
 						!= BULK_FIFO_SIZE)
-			|| !desc->wMaxPacketSize) {
+			|| !get_unaligned(&desc->wMaxPacketSize)) {
 		printf("%s, bad %s maxpacket\n", __func__, _ep->name);
 		return -ERANGE;
 	}
@@ -345,7 +346,7 @@ static int pxa25x_ep_enable(struct usb_ep *_ep,
 	ep->desc = desc;
 	ep->stopped = 0;
 	ep->pio_irqs = 0;
-	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	ep->ep.maxpacket = le16_to_cpu(get_unaligned(&desc->wMaxPacketSize));
 
 	/* flush fifo (mostly for OUT buffers) */
 	pxa25x_ep_fifo_flush(_ep);
@@ -485,7 +486,7 @@ write_fifo(struct pxa25x_ep *ep, struct pxa25x_request *req)
 {
 	unsigned max;
 
-	max = le16_to_cpu(ep->desc->wMaxPacketSize);
+	max = le16_to_cpu(get_unaligned(&ep->desc->wMaxPacketSize));
 	do {
 		unsigned count;
 		int is_last, is_short;
@@ -766,7 +767,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	 */
 	if (unlikely(ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
 			&& req->req.length >
-			le16_to_cpu(ep->desc->wMaxPacketSize)))
+			le16_to_cpu(get_unaligned(&ep->desc->wMaxPacketSize))))
 		return -EMSGSIZE;
 
 	debug_cond(NOISY, "%s queue req %p, len %d buf %p\n",
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 87a59704db..98f2a104b7 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -43,6 +43,7 @@ COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-mpc512x.o
 else
 COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
 endif
+COBJS-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
 COBJS-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
 COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
 COBJS-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
diff --git a/drivers/usb/host/ehci-faraday.c b/drivers/usb/host/ehci-faraday.c
new file mode 100644
index 0000000000..86add36ce1
--- /dev/null
+++ b/drivers/usb/host/ehci-faraday.c
@@ -0,0 +1,148 @@
+/*
+ * Faraday USB 2.0 EHCI Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <usb.h>
+#include <usb/fusbh200.h>
+#include <usb/fotg210.h>
+
+#include "ehci.h"
+
+#ifndef CONFIG_USB_EHCI_BASE_LIST
+#define CONFIG_USB_EHCI_BASE_LIST	{ CONFIG_USB_EHCI_BASE }
+#endif
+
+union ehci_faraday_regs {
+	struct fusbh200_regs usb;
+	struct fotg210_regs  otg;
+};
+
+static inline int ehci_is_fotg2xx(union ehci_faraday_regs *regs)
+{
+	return !readl(&regs->usb.easstr);
+}
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(int index, struct ehci_hccr **ret_hccr,
+		struct ehci_hcor **ret_hcor)
+{
+	struct ehci_hccr *hccr;
+	struct ehci_hcor *hcor;
+	union ehci_faraday_regs *regs;
+	uint32_t base_list[] = CONFIG_USB_EHCI_BASE_LIST;
+
+	if (index < 0 || index >= ARRAY_SIZE(base_list))
+		return -1;
+	regs = (void __iomem *)base_list[index];
+	hccr = (struct ehci_hccr *)&regs->usb.hccr;
+	hcor = (struct ehci_hcor *)&regs->usb.hcor;
+
+	if (ehci_is_fotg2xx(regs)) {
+		/* A-device bus reset */
+		/* ... Power off A-device */
+		setbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSDROP);
+		/* ... Drop vbus and bus traffic */
+		clrbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSREQ);
+		mdelay(1);
+		/* ... Power on A-device */
+		clrbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSDROP);
+		/* ... Drive vbus and bus traffic */
+		setbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSREQ);
+		mdelay(1);
+		/* Disable OTG & DEV interrupts, triggered at level-high */
+		writel(IMR_IRQLH | IMR_OTG | IMR_DEV, &regs->otg.imr);
+		/* Clear all interrupt status */
+		writel(ISR_HOST | ISR_OTG | ISR_DEV, &regs->otg.isr);
+	} else {
+		/* Interrupt=level-high */
+		setbits_le32(&regs->usb.bmcsr, BMCSR_IRQLH);
+		/* VBUS on */
+		clrbits_le32(&regs->usb.bmcsr, BMCSR_VBUS_OFF);
+		/* Disable all interrupts */
+		writel(0x00, &regs->usb.bmier);
+		writel(0x1f, &regs->usb.bmisr);
+	}
+
+	*ret_hccr = hccr;
+	*ret_hcor = hcor;
+
+	return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(int index)
+{
+	return 0;
+}
+
+/*
+ * This ehci_set_usbmode() overrides the weak function
+ * in "ehci-hcd.c".
+ */
+void ehci_set_usbmode(int index)
+{
+	/* nothing needs to be done */
+}
+
+/*
+ * This ehci_get_port_speed() overrides the weak function
+ * in "ehci-hcd.c".
+ */
+int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
+{
+	int spd, ret = PORTSC_PSPD_HS;
+	union ehci_faraday_regs *regs = (void __iomem *)((ulong)hcor - 0x10);
+
+	if (ehci_is_fotg2xx(regs))
+		spd = OTGCSR_SPD(readl(&regs->otg.otgcsr));
+	else
+		spd = BMCSR_SPD(readl(&regs->usb.bmcsr));
+
+	switch (spd) {
+	case 0:    /* full speed */
+		ret = PORTSC_PSPD_FS;
+		break;
+	case 1:    /* low  speed */
+		ret = PORTSC_PSPD_LS;
+		break;
+	case 2:    /* high speed */
+		ret = PORTSC_PSPD_HS;
+		break;
+	default:
+		printf("ehci-faraday: invalid device speed\n");
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * This ehci_get_portsc_register() overrides the weak function
+ * in "ehci-hcd.c".
+ */
+uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port)
+{
+	/* Faraday EHCI has one and only one portsc register */
+	if (port) {
+		/* Printing the message would cause a scan failure! */
+		debug("The request port(%d) is not configured\n", port);
+		return NULL;
+	}
+
+	/* Faraday EHCI PORTSC register offset is 0x20 from hcor */
+	return (uint32_t *)((uint8_t *)hcor + 0x20);
+}
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index e0f3e4b6c7..706cf0cb7d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -589,10 +589,12 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
 		dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token);
 	} else {
 		dev->act_len = 0;
+#ifndef CONFIG_USB_EHCI_FARADAY
 		debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n",
 		      dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts),
 		      ehci_readl(&ctrl->hcor->or_portsc[0]),
 		      ehci_readl(&ctrl->hcor->or_portsc[1]));
+#endif
 	}
 
 	free(qtd);
@@ -603,6 +605,17 @@ fail:
 	return -1;
 }
 
+__weak uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port)
+{
+	if (port < 0 || port >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
+		/* Printing the message would cause a scan failure! */
+		debug("The request port(%u) is not configured\n", port);
+		return NULL;
+	}
+
+	return (uint32_t *)&hcor->or_portsc[port];
+}
+
 int
 ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 		 int length, struct devrequest *req)
@@ -616,11 +629,6 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 	int port = le16_to_cpu(req->index) & 0xff;
 	struct ehci_ctrl *ctrl = dev->controller;
 
-	if (port > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
-		printf("The request port(%d) is not configured\n", port - 1);
-		return -1;
-	}
-	status_reg = (uint32_t *)&ctrl->hcor->or_portsc[port - 1];
 	srclen = 0;
 
 	debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n",
@@ -631,6 +639,19 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 	typeReq = req->request | req->requesttype << 8;
 
 	switch (typeReq) {
+	case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
+	case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
+	case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
+		status_reg = ehci_get_portsc_register(ctrl->hcor, port - 1);
+		if (!status_reg)
+			return -1;
+		break;
+	default:
+		status_reg = NULL;
+		break;
+	}
+
+	switch (typeReq) {
 	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
 		switch (le16_to_cpu(req->value) >> 8) {
 		case USB_DT_DEVICE:
@@ -809,21 +830,23 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 		break;
 	case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
 		reg = ehci_readl(status_reg);
+		reg &= ~EHCI_PS_CLEAR;
 		switch (le16_to_cpu(req->value)) {
 		case USB_PORT_FEAT_ENABLE:
 			reg &= ~EHCI_PS_PE;
 			break;
 		case USB_PORT_FEAT_C_ENABLE:
-			reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE;
+			reg |= EHCI_PS_PE;
 			break;
 		case USB_PORT_FEAT_POWER:
 			if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams)))
-				reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP);
+				reg &= ~EHCI_PS_PP;
+			break;
 		case USB_PORT_FEAT_C_CONNECTION:
-			reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC;
+			reg |= EHCI_PS_CSC;
 			break;
 		case USB_PORT_FEAT_OVER_CURRENT:
-			reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC;
+			reg |= EHCI_PS_OCC;
 			break;
 		case USB_PORT_FEAT_C_RESET:
 			ctrl->portreset &= ~(1 << port);
@@ -903,6 +926,9 @@ int usb_lowlevel_init(int index, void **controller)
 	qh_list->qh_overlay.qt_token =
 			cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED));
 
+	flush_dcache_range((uint32_t)qh_list,
+			   ALIGN_END_ADDR(struct QH, qh_list, 1));
+
 	/* Set async. queue head pointer. */
 	ehci_writel(&ehcic[index].hcor->or_asynclistaddr, (uint32_t)qh_list);
 
@@ -916,6 +942,9 @@ int usb_lowlevel_init(int index, void **controller)
 	periodic->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
 	periodic->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
 
+	flush_dcache_range((uint32_t)periodic,
+			   ALIGN_END_ADDR(struct QH, periodic, 1));
+
 	/*
 	 * Step 2: Setup frame-list: Every microframe, USB tries the same list.
 	 *         In particular, device specifications on polling frequency
@@ -933,6 +962,10 @@ int usb_lowlevel_init(int index, void **controller)
 						| QH_LINK_TYPE_QH;
 	}
 
+	flush_dcache_range((uint32_t)ehcic[index].periodic_list,
+			   ALIGN_END_ADDR(uint32_t, ehcic[index].periodic_list,
+					  1024));
+
 	/* Set periodic list base address */
 	ehci_writel(&ehcic[index].hcor->or_periodiclistbase,
 		(uint32_t)ehcic[index].periodic_list);
@@ -959,10 +992,13 @@ int usb_lowlevel_init(int index, void **controller)
 	cmd |= CMD_RUN;
 	ehci_writel(&ehcic[index].hcor->or_usbcmd, cmd);
 
+#ifndef CONFIG_USB_EHCI_FARADAY
 	/* take control over the ports */
 	cmd = ehci_readl(&ehcic[index].hcor->or_configflag);
 	cmd |= FLAG_CF;
 	ehci_writel(&ehcic[index].hcor->or_configflag, cmd);
+#endif
+
 	/* unblock posted write */
 	cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
 	mdelay(5);
@@ -1144,6 +1180,16 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize,
 		*buf = buffer + i * elementsize;
 	}
 
+	flush_dcache_range((uint32_t)buffer,
+			   ALIGN_END_ADDR(char, buffer,
+					  queuesize * elementsize));
+	flush_dcache_range((uint32_t)result->first,
+			   ALIGN_END_ADDR(struct QH, result->first,
+					  queuesize));
+	flush_dcache_range((uint32_t)result->tds,
+			   ALIGN_END_ADDR(struct qTD, result->tds,
+					  queuesize));
+
 	if (disable_periodic(ctrl) < 0) {
 		debug("FATAL: periodic should never fail, but did");
 		goto fail3;
@@ -1154,6 +1200,11 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize,
 	result->last->qh_link = list->qh_link;
 	list->qh_link = (uint32_t)result->first | QH_LINK_TYPE_QH;
 
+	flush_dcache_range((uint32_t)result->last,
+			   ALIGN_END_ADDR(struct QH, result->last, 1));
+	flush_dcache_range((uint32_t)list,
+			   ALIGN_END_ADDR(struct QH, list, 1));
+
 	if (enable_periodic(ctrl) < 0) {
 		debug("FATAL: periodic should never fail, but did");
 		goto fail3;
@@ -1184,6 +1235,8 @@ void *poll_int_queue(struct usb_device *dev, struct int_queue *queue)
 		return NULL;
 	}
 	/* still active */
+	invalidate_dcache_range((uint32_t)cur,
+				ALIGN_END_ADDR(struct QH, cur, 1));
 	if (cur->qh_overlay.qt_token & 0x80) {
 		debug("Exit poll_int_queue with no completed intr transfer. "
 		      "token is %x\n", cur->qh_overlay.qt_token);
@@ -1290,6 +1343,9 @@ submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 		return -EINVAL;
 	}
 
+	invalidate_dcache_range((uint32_t)buffer,
+				ALIGN_END_ADDR(char, buffer, length));
+
 	ret = destroy_int_queue(dev, queue);
 	if (ret < 0)
 		return ret;
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index d1d732c283..bd48704c87 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -35,6 +35,7 @@
 
 #include <linux/types.h>	/* __u8 etc */
 #include <asm/byteorder.h>	/* le16_to_cpu */
+#include <asm/unaligned.h>	/* get_unaligned() */
 
 /*-------------------------------------------------------------------------*/
 
@@ -596,7 +597,7 @@ static inline int usb_endpoint_is_isoc_out(
  */
 static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
 {
-	return __le16_to_cpu(epd->wMaxPacketSize);
+	return __le16_to_cpu(get_unaligned(&epd->wMaxPacketSize));
 }
 
 static inline int usb_endpoint_interrupt_type(
diff --git a/include/usb/fotg210.h b/include/usb/fotg210.h
new file mode 100644
index 0000000000..2d2d2431ba
--- /dev/null
+++ b/include/usb/fotg210.h
@@ -0,0 +1,364 @@
+/*
+ * Faraday USB 2.0 OTG Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef _FOTG210_H
+#define _FOTG210_H
+
+struct fotg210_regs {
+	/* USB Host Controller */
+	struct {
+		uint32_t data[4];
+	} hccr;			/* 0x00 - 0x0f: hccr */
+	struct {
+		uint32_t data[9];
+	} hcor;			/* 0x10 - 0x33: hcor */
+	uint32_t rsvd1[3];
+	uint32_t miscr;	/* 0x40: Miscellaneous Register */
+	uint32_t rsvd2[15];
+	/* USB OTG Controller */
+	uint32_t otgcsr;/* 0x80: OTG Control Status Register */
+	uint32_t otgisr;/* 0x84: OTG Interrupt Status Register */
+	uint32_t otgier;/* 0x88: OTG Interrupt Enable Register */
+	uint32_t rsvd3[13];
+	uint32_t isr;	/* 0xC0: Global Interrupt Status Register */
+	uint32_t imr;	/* 0xC4: Global Interrupt Mask Register */
+	uint32_t rsvd4[14];
+	/* USB Device Controller */
+	uint32_t dev_ctrl;/* 0x100: Device Control Register */
+	uint32_t dev_addr;/* 0x104: Device Address Register */
+	uint32_t dev_test;/* 0x108: Device Test Register */
+	uint32_t sof_fnr; /* 0x10c: SOF Frame Number Register */
+	uint32_t sof_mtr; /* 0x110: SOF Mask Timer Register */
+	uint32_t phy_tmsr;/* 0x114: PHY Test Mode Selector Register */
+	uint32_t rsvd5[2];
+	uint32_t cxfifo;/* 0x120: CX FIFO Register */
+	uint32_t idle;	/* 0x124: IDLE Counter Register */
+	uint32_t rsvd6[2];
+	uint32_t gimr;	/* 0x130: Group Interrupt Mask Register */
+	uint32_t gimr0; /* 0x134: Group Interrupt Mask Register 0 */
+	uint32_t gimr1; /* 0x138: Group Interrupt Mask Register 1 */
+	uint32_t gimr2; /* 0x13c: Group Interrupt Mask Register 2 */
+	uint32_t gisr;	/* 0x140: Group Interrupt Status Register */
+	uint32_t gisr0; /* 0x144: Group Interrupt Status Register 0 */
+	uint32_t gisr1; /* 0x148: Group Interrupt Status Register 1 */
+	uint32_t gisr2; /* 0x14c: Group Interrupt Status Register 2 */
+	uint32_t rxzlp; /* 0x150: Receive Zero-Length-Packet Register */
+	uint32_t txzlp; /* 0x154: Transfer Zero-Length-Packet Register */
+	uint32_t isoeasr;/* 0x158: ISOC Error/Abort Status Register */
+	uint32_t rsvd7[1];
+	uint32_t iep[8]; /* 0x160 - 0x17f: IN Endpoint Register */
+	uint32_t oep[8]; /* 0x180 - 0x19f: OUT Endpoint Register */
+	uint32_t epmap14;/* 0x1a0: Endpoint Map Register (EP1 ~ 4) */
+	uint32_t epmap58;/* 0x1a4: Endpoint Map Register (EP5 ~ 8) */
+	uint32_t fifomap;/* 0x1a8: FIFO Map Register */
+	uint32_t fifocfg; /* 0x1ac: FIFO Configuration Register */
+	uint32_t fifocsr[4];/* 0x1b0 - 0x1bf: FIFO Control Status Register */
+	uint32_t dma_fifo; /* 0x1c0: DMA Target FIFO Register */
+	uint32_t rsvd8[1];
+	uint32_t dma_ctrl; /* 0x1c8: DMA Control Register */
+	uint32_t dma_addr; /* 0x1cc: DMA Address Register */
+	uint32_t ep0_data; /* 0x1d0: EP0 Setup Packet PIO Register */
+};
+
+/* Miscellaneous Register */
+#define MISCR_SUSPEND  (1 << 6) /* Put transceiver in suspend mode */
+#define MISCR_EOF2(x)  (((x) & 0x3) << 4) /* EOF 2 Timing */
+#define MISCR_EOF1(x)  (((x) & 0x3) << 2) /* EOF 1 Timing */
+#define MISCR_ASST(x)  (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
+
+/* OTG Control Status Register */
+#define OTGCSR_SPD_HIGH     (2 << 22) /* Speed of the attached device (host) */
+#define OTGCSR_SPD_LOW      (1 << 22)
+#define OTGCSR_SPD_FULL     (0 << 22)
+#define OTGCSR_SPD_MASK     (3 << 22)
+#define OTGCSR_SPD_SHIFT    22
+#define OTGCSR_SPD(x)       (((x) >> 22) & 0x03)
+#define OTGCSR_DEV_A        (0 << 21) /* Acts as A-device */
+#define OTGCSR_DEV_B        (1 << 21) /* Acts as B-device */
+#define OTGCSR_ROLE_H       (0 << 20) /* Acts as Host */
+#define OTGCSR_ROLE_D       (1 << 20) /* Acts as Device */
+#define OTGCSR_A_VBUS_VLD   (1 << 19) /* A-device VBUS Valid */
+#define OTGCSR_A_SESS_VLD   (1 << 18) /* A-device Session Valid */
+#define OTGCSR_B_SESS_VLD   (1 << 17) /* B-device Session Valid */
+#define OTGCSR_B_SESS_END   (1 << 16) /* B-device Session End */
+#define OTGCSR_HFT_LONG     (1 << 11) /* HDISCON noise filter = 270 us*/
+#define OTGCSR_HFT          (0 << 11) /* HDISCON noise filter = 135 us*/
+#define OTGCSR_VFT_LONG     (1 << 10) /* VBUS noise filter = 472 us*/
+#define OTGCSR_VFT          (0 << 10) /* VBUS noise filter = 135 us*/
+#define OTGCSR_IDFT_LONG    (1 << 9)  /* ID noise filter = 4 ms*/
+#define OTGCSR_IDFT         (0 << 9)  /* ID noise filter = 3 ms*/
+#define OTGCSR_A_SRPR_VBUS  (0 << 8)  /* A-device: SRP responds to VBUS */
+#define OTGCSR_A_SRPR_DATA  (1 << 8)  /* A-device: SRP responds to DATA-LINE */
+#define OTGCSR_A_SRP_EN     (1 << 7)  /* A-device SRP detection enabled */
+#define OTGCSR_A_HNP        (1 << 6)  /* Set role=A-device with HNP enabled */
+#define OTGCSR_A_BUSDROP    (1 << 5)  /* A-device drop bus (power-down) */
+#define OTGCSR_A_BUSREQ     (1 << 4)  /* A-device request bus */
+#define OTGCSR_B_VBUS_DISC  (1 << 2)  /* B-device discharges VBUS */
+#define OTGCSR_B_HNP        (1 << 1)  /* B-device enable HNP */
+#define OTGCSR_B_BUSREQ     (1 << 0)  /* B-device request bus */
+
+/* OTG Interrupt Status Register */
+#define OTGISR_APRM         (1 << 12) /* Mini-A plug removed */
+#define OTGISR_BPRM         (1 << 11) /* Mini-B plug removed */
+#define OTGISR_OVD          (1 << 10) /* over-current detected */
+#define OTGISR_IDCHG        (1 << 9)  /* ID(A/B) changed */
+#define OTGISR_RLCHG        (1 << 8)  /* Role(Host/Device) changed */
+#define OTGISR_BSESSEND     (1 << 6)  /* B-device Session End */
+#define OTGISR_AVBUSERR     (1 << 5)  /* A-device VBUS Error */
+#define OTGISR_ASRP         (1 << 4)  /* A-device SRP detected */
+#define OTGISR_BSRP         (1 << 0)  /* B-device SRP complete */
+
+/* OTG Interrupt Enable Register */
+#define OTGIER_APRM         (1 << 12) /* Mini-A plug removed */
+#define OTGIER_BPRM         (1 << 11) /* Mini-B plug removed */
+#define OTGIER_OVD          (1 << 10) /* over-current detected */
+#define OTGIER_IDCHG        (1 << 9)  /* ID(A/B) changed */
+#define OTGIER_RLCHG        (1 << 8)  /* Role(Host/Device) changed */
+#define OTGIER_BSESSEND     (1 << 6)  /* B-device Session End */
+#define OTGIER_AVBUSERR     (1 << 5)  /* A-device VBUS Error */
+#define OTGIER_ASRP         (1 << 4)  /* A-device SRP detected */
+#define OTGIER_BSRP         (1 << 0)  /* B-device SRP complete */
+
+/* Global Interrupt Status Register (W1C) */
+#define ISR_HOST            (1 << 2)  /* USB Host interrupt */
+#define ISR_OTG             (1 << 1)  /* USB OTG interrupt */
+#define ISR_DEV             (1 << 0)  /* USB Device interrupt */
+#define ISR_MASK            0x07
+
+/* Global Interrupt Mask Register */
+#define IMR_IRQLH           (1 << 3)  /* Interrupt triggered at level-high */
+#define IMR_IRQLL           (0 << 3)  /* Interrupt triggered at level-low */
+#define IMR_HOST            (1 << 2)  /* USB Host interrupt */
+#define IMR_OTG             (1 << 1)  /* USB OTG interrupt */
+#define IMR_DEV             (1 << 0)  /* USB Device interrupt */
+#define IMR_MASK            0x0f
+
+/* Device Control Register */
+#define DEVCTRL_FS_FORCED   (1 << 9)  /* Forced to be Full-Speed Mode */
+#define DEVCTRL_HS          (1 << 6)  /* High Speed Mode */
+#define DEVCTRL_FS          (0 << 6)  /* Full Speed Mode */
+#define DEVCTRL_EN          (1 << 5)  /* Chip Enable */
+#define DEVCTRL_RESET       (1 << 4)  /* Chip Software Reset */
+#define DEVCTRL_SUSPEND     (1 << 3)  /* Enter Suspend Mode */
+#define DEVCTRL_GIRQ_EN     (1 << 2)  /* Global Interrupt Enabled */
+#define DEVCTRL_HALFSPD     (1 << 1)  /* Half speed mode for FPGA test */
+#define DEVCTRL_RWAKEUP     (1 << 0)  /* Enable remote wake-up */
+
+/* Device Address Register */
+#define DEVADDR_CONF        (1 << 7)  /* SET_CONFIGURATION has been executed */
+#define DEVADDR_ADDR(x)     ((x) & 0x7f)
+#define DEVADDR_ADDR_MASK   0x7f
+
+/* Device Test Register */
+#define DEVTEST_NOSOF       (1 << 6)  /* Do not generate SOF */
+#define DEVTEST_TST_MODE    (1 << 5)  /* Enter Test Mode */
+#define DEVTEST_TST_NOTS    (1 << 4)  /* Do not toggle sequence */
+#define DEVTEST_TST_NOCRC   (1 << 3)  /* Do not append CRC */
+#define DEVTEST_TST_CLREA   (1 << 2)  /* Clear External Side Address */
+#define DEVTEST_TST_CXLP    (1 << 1)  /* EP0 loopback test */
+#define DEVTEST_TST_CLRFF   (1 << 0)  /* Clear FIFO */
+
+/* SOF Frame Number Register */
+#define SOFFNR_UFN(x)       (((x) >> 11) & 0x7) /* SOF Micro-Frame Number */
+#define SOFFNR_FNR(x)       ((x) & 0x7ff) /* SOF Frame Number */
+
+/* SOF Mask Timer Register */
+#define SOFMTR_TMR(x)       ((x) & 0xffff)
+
+/* PHY Test Mode Selector Register */
+#define PHYTMSR_TST_PKT     (1 << 4) /* Packet send test */
+#define PHYTMSR_TST_SE0NAK  (1 << 3) /* High-Speed quiescent state */
+#define PHYTMSR_TST_KSTA    (1 << 2) /* High-Speed K state */
+#define PHYTMSR_TST_JSTA    (1 << 1) /* High-Speed J state */
+#define PHYTMSR_UNPLUG      (1 << 0) /* Enable soft-detachment */
+
+/* CX FIFO Register */
+#define CXFIFO_BYTES(x)     (((x) >> 24) & 0x7f) /* CX/EP0 FIFO byte count */
+#define CXFIFO_FIFOE(x)     (1 << (((x) & 0x03) + 8)) /* EPx FIFO empty */
+#define CXFIFO_FIFOE_FIFO0  (1 << 8)
+#define CXFIFO_FIFOE_FIFO1  (1 << 9)
+#define CXFIFO_FIFOE_FIFO2  (1 << 10)
+#define CXFIFO_FIFOE_FIFO3  (1 << 11)
+#define CXFIFO_FIFOE_MASK   (0x0f << 8)
+#define CXFIFO_CXFIFOE      (1 << 5) /* CX FIFO empty */
+#define CXFIFO_CXFIFOF      (1 << 4) /* CX FIFO full */
+#define CXFIFO_CXFIFOCLR    (1 << 3) /* CX FIFO clear */
+#define CXFIFO_CXSTALL      (1 << 2) /* CX Stall */
+#define CXFIFO_TSTPKTFIN    (1 << 1) /* Test packet data transfer finished */
+#define CXFIFO_CXFIN        (1 << 0) /* CX data transfer finished */
+
+/* IDLE Counter Register */
+#define IDLE_MS(x)          ((x) & 0x07) /* PHY suspend delay = x ms */
+
+/* Group Interrupt Mask(Disable) Register */
+#define GIMR_GRP2           (1 << 2) /* Disable interrupt group 2 */
+#define GIMR_GRP1           (1 << 1) /* Disable interrupt group 1 */
+#define GIMR_GRP0           (1 << 0) /* Disable interrupt group 0 */
+#define GIMR_MASK           0x07
+
+/* Group Interrupt Mask(Disable) Register 0 (CX) */
+#define GIMR0_CXABORT       (1 << 5) /* CX command abort interrupt */
+#define GIMR0_CXERR         (1 << 4) /* CX command error interrupt */
+#define GIMR0_CXEND         (1 << 3) /* CX command end interrupt */
+#define GIMR0_CXOUT         (1 << 2) /* EP0-OUT packet interrupt */
+#define GIMR0_CXIN          (1 << 1) /* EP0-IN packet interrupt */
+#define GIMR0_CXSETUP       (1 << 0) /* EP0-SETUP packet interrupt */
+#define GIMR0_MASK          0x3f
+
+/* Group Interrupt Mask(Disable) Register 1 (FIFO) */
+#define GIMR1_FIFO_IN(x)    (1 << (((x) & 3) + 16))    /* FIFOx IN */
+#define GIMR1_FIFO_TX(x)    GIMR1_FIFO_IN(x)
+#define GIMR1_FIFO_OUT(x)   (1 << (((x) & 3) * 2))     /* FIFOx OUT */
+#define GIMR1_FIFO_SPK(x)   (1 << (((x) & 3) * 2 + 1)) /* FIFOx SHORT PACKET */
+#define GIMR1_FIFO_RX(x)    (GIMR1_FIFO_OUT(x) | GIMR1_FIFO_SPK(x))
+#define GIMR1_MASK          0xf00ff
+
+/* Group Interrupt Mask(Disable) Register 2 (Device) */
+#define GIMR2_WAKEUP        (1 << 10) /* Device waked up */
+#define GIMR2_IDLE          (1 << 9)  /* Device idle */
+#define GIMR2_DMAERR        (1 << 8)  /* DMA error */
+#define GIMR2_DMAFIN        (1 << 7)  /* DMA finished */
+#define GIMR2_ZLPRX         (1 << 6)  /* Zero-Length-Packet Rx Interrupt */
+#define GIMR2_ZLPTX         (1 << 5)  /* Zero-Length-Packet Tx Interrupt */
+#define GIMR2_ISOCABT       (1 << 4)  /* ISOC Abort Interrupt */
+#define GIMR2_ISOCERR       (1 << 3)  /* ISOC Error Interrupt */
+#define GIMR2_RESUME        (1 << 2)  /* Resume state change Interrupt */
+#define GIMR2_SUSPEND       (1 << 1)  /* Suspend state change Interrupt */
+#define GIMR2_RESET         (1 << 0)  /* Reset Interrupt */
+#define GIMR2_MASK          0x7ff
+
+/* Group Interrupt Status Register */
+#define GISR_GRP2           (1 << 2) /* Interrupt group 2 */
+#define GISR_GRP1           (1 << 1) /* Interrupt group 1 */
+#define GISR_GRP0           (1 << 0) /* Interrupt group 0 */
+
+/* Group Interrupt Status Register 0 (CX) */
+#define GISR0_CXABORT       (1 << 5) /* CX command abort interrupt */
+#define GISR0_CXERR         (1 << 4) /* CX command error interrupt */
+#define GISR0_CXEND         (1 << 3) /* CX command end interrupt */
+#define GISR0_CXOUT         (1 << 2) /* EP0-OUT packet interrupt */
+#define GISR0_CXIN          (1 << 1) /* EP0-IN packet interrupt */
+#define GISR0_CXSETUP       (1 << 0) /* EP0-SETUP packet interrupt */
+
+/* Group Interrupt Status Register 1 (FIFO) */
+#define GISR1_IN_FIFO(x)    (1 << (((x) & 0x03) + 16))    /* FIFOx IN */
+#define GISR1_OUT_FIFO(x)   (1 << (((x) & 0x03) * 2))     /* FIFOx OUT */
+#define GISR1_SPK_FIFO(x)   (1 << (((x) & 0x03) * 2 + 1)) /* FIFOx SPK */
+#define GISR1_RX_FIFO(x)    (3 << (((x) & 0x03) * 2))     /* FIFOx OUT/SPK */
+
+/* Group Interrupt Status Register 2 (Device) */
+#define GISR2_WAKEUP        (1 << 10) /* Device waked up */
+#define GISR2_IDLE          (1 << 9)  /* Device idle */
+#define GISR2_DMAERR        (1 << 8)  /* DMA error */
+#define GISR2_DMAFIN        (1 << 7)  /* DMA finished */
+#define GISR2_ZLPRX         (1 << 6)  /* Zero-Length-Packet Rx Interrupt */
+#define GISR2_ZLPTX         (1 << 5)  /* Zero-Length-Packet Tx Interrupt */
+#define GISR2_ISOCABT       (1 << 4)  /* ISOC Abort Interrupt */
+#define GISR2_ISOCERR       (1 << 3)  /* ISOC Error Interrupt */
+#define GISR2_RESUME        (1 << 2)  /* Resume state change Interrupt */
+#define GISR2_SUSPEND       (1 << 1)  /* Suspend state change Interrupt */
+#define GISR2_RESET         (1 << 0)  /* Reset Interrupt */
+
+/* Receive Zero-Length-Packet Register */
+#define RXZLP_EP(x)         (1 << ((x) - 1)) /* EPx ZLP rx interrupt */
+
+/* Transfer Zero-Length-Packet Register */
+#define TXZLP_EP(x)         (1 << ((x) - 1)) /* EPx ZLP tx interrupt */
+
+/* ISOC Error/Abort Status Register */
+#define ISOEASR_EP(x)       (0x10001 << ((x) - 1)) /* EPx ISOC Error/Abort */
+
+/* IN Endpoint Register */
+#define IEP_SENDZLP         (1 << 15)     /* Send Zero-Length-Packet */
+#define IEP_TNRHB(x)        (((x) & 0x03) << 13) \
+	/* Transaction Number for High-Bandwidth EP(ISOC) */
+#define IEP_RESET           (1 << 12)     /* Reset Toggle Sequence */
+#define IEP_STALL           (1 << 11)     /* Stall */
+#define IEP_MAXPS(x)        ((x) & 0x7ff) /* Max. packet size */
+
+/* OUT Endpoint Register */
+#define OEP_RESET           (1 << 12)     /* Reset Toggle Sequence */
+#define OEP_STALL           (1 << 11)     /* Stall */
+#define OEP_MAXPS(x)        ((x) & 0x7ff) /* Max. packet size */
+
+/* Endpoint Map Register (EP1 ~ EP4) */
+#define EPMAP14_SET_IN(ep, fifo) \
+	((fifo) & 3) << (((ep) - 1) << 3 + 0)
+#define EPMAP14_SET_OUT(ep, fifo) \
+	((fifo) & 3) << (((ep) - 1) << 3 + 4)
+#define EPMAP14_SET(ep, in, out) \
+	do { \
+		EPMAP14_SET_IN(ep, in); \
+		EPMAP14_SET_OUT(ep, out); \
+	} while (0)
+
+#define EPMAP14_DEFAULT     0x33221100 /* EP1->FIFO0, EP2->FIFO1... */
+
+/* Endpoint Map Register (EP5 ~ EP8) */
+#define EPMAP58_SET_IN(ep, fifo) \
+	((fifo) & 3) << (((ep) - 5) << 3 + 0)
+#define EPMAP58_SET_OUT(ep, fifo) \
+	((fifo) & 3) << (((ep) - 5) << 3 + 4)
+#define EPMAP58_SET(ep, in, out) \
+	do { \
+		EPMAP58_SET_IN(ep, in); \
+		EPMAP58_SET_OUT(ep, out); \
+	} while (0)
+
+#define EPMAP58_DEFAULT     0x00000000 /* All EPx->FIFO0 */
+
+/* FIFO Map Register */
+#define FIFOMAP_BIDIR       (2 << 4)
+#define FIFOMAP_IN          (1 << 4)
+#define FIFOMAP_OUT         (0 << 4)
+#define FIFOMAP_DIR_MASK    0x30
+#define FIFOMAP_EP(x)       ((x) & 0x0f)
+#define FIFOMAP_EP_MASK     0x0f
+#define FIFOMAP_CFG_MASK    0x3f
+#define FIFOMAP_DEFAULT     0x04030201 /* FIFO0->EP1, FIFO1->EP2... */
+#define FIFOMAP(fifo, cfg)  (((cfg) & 0x3f) << (((fifo) & 3) << 3))
+
+/* FIFO Configuration Register */
+#define FIFOCFG_EN          (1 << 5)
+#define FIFOCFG_BLKSZ_1024  (1 << 4)
+#define FIFOCFG_BLKSZ_512   (0 << 4)
+#define FIFOCFG_3BLK        (2 << 2)
+#define FIFOCFG_2BLK        (1 << 2)
+#define FIFOCFG_1BLK        (0 << 2)
+#define FIFOCFG_NBLK_MASK   3
+#define FIFOCFG_NBLK_SHIFT  2
+#define FIFOCFG_INTR        (3 << 0)
+#define FIFOCFG_BULK        (2 << 0)
+#define FIFOCFG_ISOC        (1 << 0)
+#define FIFOCFG_RSVD        (0 << 0)  /* Reserved */
+#define FIFOCFG_TYPE_MASK   3
+#define FIFOCFG_TYPE_SHIFT  0
+#define FIFOCFG_CFG_MASK    0x3f
+#define FIFOCFG(fifo, cfg)  (((cfg) & 0x3f) << (((fifo) & 3) << 3))
+
+/* FIFO Control Status Register */
+#define FIFOCSR_RESET       (1 << 12) /* FIFO Reset */
+#define FIFOCSR_BYTES(x)    ((x) & 0x7ff) /* Length(bytes) for OUT-EP/FIFO */
+
+/* DMA Target FIFO Register */
+#define DMAFIFO_CX          (1 << 4) /* DMA FIFO = CX FIFO */
+#define DMAFIFO_FIFO(x)     (1 << ((x) & 0x3)) /* DMA FIFO = FIFOx */
+
+/* DMA Control Register */
+#define DMACTRL_LEN(x)      (((x) & 0x1ffff) << 8) /* DMA length (Bytes) */
+#define DMACTRL_LEN_SHIFT   8
+#define DMACTRL_CLRFF       (1 << 4) /* Clear FIFO upon DMA abort */
+#define DMACTRL_ABORT       (1 << 3) /* DMA abort */
+#define DMACTRL_IO2IO       (1 << 2) /* IO to IO */
+#define DMACTRL_FIFO2MEM    (0 << 1) /* FIFO to Memory */
+#define DMACTRL_MEM2FIFO    (1 << 1) /* Memory to FIFO */
+#define DMACTRL_START       (1 << 0) /* DMA start */
+
+#endif
diff --git a/include/usb/fusbh200.h b/include/usb/fusbh200.h
new file mode 100644
index 0000000000..8a9c488cb5
--- /dev/null
+++ b/include/usb/fusbh200.h
@@ -0,0 +1,61 @@
+/*
+ * Faraday USB 2.0 EHCI Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef _FUSBH200_H
+#define _FUSBH200_H
+
+struct fusbh200_regs {
+	struct {
+		uint32_t data[4];
+	} hccr;			/* 0x00 - 0x0f: hccr */
+	struct {
+		uint32_t data[9];
+	} hcor;			/* 0x10 - 0x33: hcor */
+	uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */
+	uint32_t rsvd[2];
+	uint32_t bmcsr;	/* 0x40: Bus Monitor Control Status Register */
+	uint32_t bmisr;	/* 0x44: Bus Monitor Interrupt Status Register */
+	uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */
+};
+
+/* EOF & Async. Schedule Sleep Timer Register */
+#define EASSTR_RUNNING  (1 << 6) /* Put transceiver in running/resume mode */
+#define EASSTR_SUSPEND  (0 << 6) /* Put transceiver in suspend mode */
+#define EASSTR_EOF2(x)  (((x) & 0x3) << 4) /* EOF 2 Timing */
+#define EASSTR_EOF1(x)  (((x) & 0x3) << 2) /* EOF 1 Timing */
+#define EASSTR_ASST(x)  (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
+
+/* Bus Monitor Control Status Register */
+#define BMCSR_SPD_HIGH  (2 << 9) /* Speed of the attached device */
+#define BMCSR_SPD_LOW   (1 << 9)
+#define BMCSR_SPD_FULL  (0 << 9)
+#define BMCSR_SPD_MASK  (3 << 9)
+#define BMCSR_SPD_SHIFT 9
+#define BMCSR_SPD(x)    ((x >> 9) & 0x03)
+#define BMCSR_VBUS      (1 << 8) /* VBUS Valid */
+#define BMCSR_VBUS_OFF  (1 << 4) /* VBUS Off */
+#define BMCSR_VBUS_ON   (0 << 4) /* VBUS On */
+#define BMCSR_IRQLH     (1 << 3) /* IRQ triggered at level-high */
+#define BMCSR_IRQLL     (0 << 3) /* IRQ triggered at level-low */
+#define BMCSR_HALFSPD   (1 << 2) /* Half speed mode for FPGA test */
+#define BMCSR_HFT_LONG  (1 << 1) /* HDISCON noise filter = 270 us*/
+#define BMCSR_HFT       (0 << 1) /* HDISCON noise filter = 135 us*/
+#define BMCSR_VFT_LONG  (1 << 1) /* VBUS noise filter = 472 us*/
+#define BMCSR_VFT       (0 << 1) /* VBUS noise filter = 135 us*/
+
+/* Bus Monitor Interrupt Status Register */
+/* Bus Monitor Interrupt Enable Register */
+#define BMISR_DMAERR    (1 << 4) /* DMA error */
+#define BMISR_DMA       (1 << 3) /* DMA complete */
+#define BMISR_DEVRM     (1 << 2) /* device removed */
+#define BMISR_OVD       (1 << 1) /* over-current detected */
+#define BMISR_VBUSERR   (1 << 0) /* VBUS error */
+
+#endif