Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

97 files changed, 2682 insertions, 2999 deletions

diff --git a/Makefile b/Makefile
index e3a27c62493..cbab5716df3 100644
--- a/Makefile
+++ b/Makefile
@@ -438,6 +438,11 @@ $(obj)u-boot.kwb:       $(obj)u-boot.bin
 		$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
 		-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
 
+$(obj)u-boot.pbl:	$(obj)u-boot.bin
+		$(obj)tools/mkimage -n $(CONFIG_PBLRCW_CONFIG) \
+		-R $(CONFIG_PBLPBI_CONFIG) -T pblimage \
+		-d $< $@
+
 $(obj)u-boot.sha1:	$(obj)u-boot.bin
 		$(obj)tools/ubsha1 $(obj)u-boot.bin
 
@@ -808,6 +813,7 @@ clobber:	tidy
 		$(obj)cscope.* $(obj)*.*~
 	@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y)
 	@rm -f $(obj)u-boot.kwb
+	@rm -f $(obj)u-boot.pbl
 	@rm -f $(obj)u-boot.imx
 	@rm -f $(obj)u-boot.ubl
 	@rm -f $(obj)u-boot.ais
diff --git a/README b/README
index 4428205b86a..5793b0a2069 100644
--- a/README
+++ b/README
@@ -383,6 +383,31 @@ The following options need to be configured:
 		symbol should be set to the TLB1 entry to be used for this
 		purpose.
 
+		CONFIG_SYS_FSL_ERRATUM_A004510
+
+		Enables a workaround for erratum A004510.  If set,
+		then CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV and
+		CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY must be set.
+
+		CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV
+		CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 (optional)
+
+		Defines one or two SoC revisions (low 8 bits of SVR)
+		for which the A004510 workaround should be applied.
+
+		The rest of SVR is either not relevant to the decision
+		of whether the erratum is present (e.g. p2040 versus
+		p2041) or is implied by the build target, which controls
+		whether CONFIG_SYS_FSL_ERRATUM_A004510 is set.
+
+		See Freescale App Note 4493 for more information about
+		this erratum.
+
+		CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
+
+		This is the value to write into CCSR offset 0x18600
+		according to the A004510 workaround.
+
 - Generic CPU options:
 		CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
@@ -3100,12 +3125,12 @@ to save the current settings.
 	  These two #defines specify the address and size of the
 	  environment area within the remote memory space. The
 	  local device can get the environment from remote memory
-	  space by SRIO or other links.
+	  space by SRIO or PCIE links.
 
 BE CAREFUL! For some special cases, the local device can not use
 "saveenv" command. For example, the local device will get the
-environment stored in a remote NOR flash by SRIO link, but it can
-not erase, write this NOR flash by SRIO interface.
+environment stored in a remote NOR flash by SRIO or PCIE link,
+but it can not erase, write this NOR flash by SRIO or PCIE interface.
 
 - CONFIG_ENV_IS_IN_NAND:
 
@@ -3553,9 +3578,9 @@ within that device.
 - CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 	Specifies that QE/FMAN firmware is located in the remote (master)
 	memory space.	CONFIG_SYS_FMAN_FW_ADDR is a virtual address which
-	can be mapped from slave TLB->slave LAW->slave SRIO outbound window
-	->master inbound window->master LAW->the ucode address in master's
-	NOR flash.
+	can be mapped from slave TLB->slave LAW->slave SRIO or PCIE outbound
+	window->master inbound window->master LAW->the ucode address in
+	master's memory space.
 
 Building the Software:
 ======================
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 34f6c546984..33e93c88d72 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -55,8 +55,6 @@ COBJS-$(CONFIG_P1011)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1012)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1013)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1014)	+= ddr-gen3.o
-COBJS-$(CONFIG_P1015)	+= ddr-gen3.o
-COBJS-$(CONFIG_P1016)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1020)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1021)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1022)	+= ddr-gen3.o
@@ -64,10 +62,8 @@ COBJS-$(CONFIG_P1024)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1025)	+= ddr-gen3.o
 COBJS-$(CONFIG_P2010)	+= ddr-gen3.o
 COBJS-$(CONFIG_P2020)	+= ddr-gen3.o
-COBJS-$(CONFIG_PPC_P2040)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P2041)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P3041)	+= ddr-gen3.o
-COBJS-$(CONFIG_PPC_P3060)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P4080)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P5020)	+= ddr-gen3.o
 COBJS-$(CONFIG_BSC9131)		+= ddr-gen3.o
@@ -80,10 +76,8 @@ COBJS-$(CONFIG_PCI)	+= pci.o
 COBJS-$(CONFIG_SYS_DPAA_QBMAN) += portals.o
 
 # various SoC specific assignments
-COBJS-$(CONFIG_PPC_P2040) += p2041_ids.o
 COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o
 COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o
-COBJS-$(CONFIG_PPC_P3060) += p3060_ids.o
 COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
 COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
 
@@ -103,8 +97,6 @@ COBJS-$(CONFIG_P1011)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1012)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1013)	+= p1022_serdes.o
 COBJS-$(CONFIG_P1014)	+= p1010_serdes.o
-COBJS-$(CONFIG_P1015)	+= p1021_serdes.o
-COBJS-$(CONFIG_P1016)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1017)	+= p1023_serdes.o
 COBJS-$(CONFIG_P1020)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1021)	+= p1021_serdes.o
@@ -114,10 +106,8 @@ COBJS-$(CONFIG_P1024)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1025)	+= p1021_serdes.o
 COBJS-$(CONFIG_P2010)	+= p2020_serdes.o
 COBJS-$(CONFIG_P2020)	+= p2020_serdes.o
-COBJS-$(CONFIG_PPC_P2040) += p2041_serdes.o
 COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o
 COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o
-COBJS-$(CONFIG_PPC_P3060) += p3060_serdes.o
 COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
 COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
 
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 4e1a54ad0c5..e8989bdf459 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -27,6 +27,9 @@
 
 static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
+#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
+	extern int enable_cpu_a011_workaround;
+#endif
 	__maybe_unused u32 svr = get_svr();
 
 #if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
@@ -56,8 +59,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	/*
 	 * NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
 	 * also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1
+	 * The SVR has been checked by cpu_init_r().
 	 */
-	if (SVR_SOC_VER(svr) != SVR_P4080 || SVR_MAJ(svr) < 3)
+	if (enable_cpu_a011_workaround)
 		puts("Work-around for Erratum CPU-A011 enabled\n");
 #endif
 #if defined(CONFIG_SYS_FSL_ERRATUM_CPU_A003999)
@@ -120,6 +124,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
 		puts("Work-around for Erratum NMG ETSEC129 enabled\n");
 #endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
+	puts("Work-around for Erratum A004510 enabled\n");
+#endif
 	return 0;
 }
 
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index c1815e8860d..5ddb29435c1 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -117,6 +117,9 @@ int checkcpu (void)
 	case PVR_VER_E5500:
 		puts("E5500");
 		break;
+	case PVR_VER_E6500:
+		puts("E6500");
+		break;
 	default:
 		puts("Unknown");
 		break;
@@ -427,11 +430,21 @@ static void dump_spd_ddr_reg(void)
 		case 0:
 			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
 			break;
-#ifdef CONFIG_SYS_MPC85xx_DDR2_ADDR
+#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 		case 1:
 			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
 			break;
 #endif
+#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+		case 2:
+			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+			break;
+#endif
+#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+		case 3:
+			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR;
+			break;
+#endif
 		default:
 			printf("%s unexpected controller number = %u\n",
 				__func__, i);
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index fc6c2877d25..afb56719da2 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -38,6 +38,7 @@
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
 #include <asm/fsl_srio.h>
+#include <hwconfig.h>
 #include <linux/compiler.h>
 #include "mp.h"
 #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
@@ -311,11 +312,41 @@ int cpu_init_r(void)
 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
 	defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
 	/*
+	 * CPU22 and NMG_CPU_A011 share the same workaround.
 	 * CPU22 applies to P4080 rev 1.0, 2.0, fixed in 3.0
 	 * NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
-	 * also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1
+	 * also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1, both
+	 * fixed in 2.0. NMG_CPU_A011 is activated by default and can
+	 * be disabled by hwconfig with syntax:
+	 *
+	 * fsl_cpu_a011:disable
 	 */
-	if (SVR_SOC_VER(svr) != SVR_P4080 || SVR_MAJ(svr) < 3) {
+	extern int enable_cpu_a011_workaround;
+#ifdef CONFIG_SYS_P4080_ERRATUM_CPU22
+	enable_cpu_a011_workaround = (SVR_MAJ(svr) < 3);
+#else
+	char buffer[HWCONFIG_BUFFER_SIZE];
+	char *buf = NULL;
+	int n, res;
+
+	n = getenv_f("hwconfig", buffer, sizeof(buffer));
+	if (n > 0)
+		buf = buffer;
+
+	res = hwconfig_arg_cmp_f("fsl_cpu_a011", "disable", buf);
+	if (res > 0)
+		enable_cpu_a011_workaround = 0;
+	else {
+		if (n >= HWCONFIG_BUFFER_SIZE) {
+			printf("fsl_cpu_a011 was not found. hwconfig variable "
+				"may be too long\n");
+		}
+		enable_cpu_a011_workaround =
+			(SVR_SOC_VER(svr) == SVR_P4080 && SVR_MAJ(svr) < 3) ||
+			(SVR_SOC_VER(svr) != SVR_P4080 && SVR_MAJ(svr) < 2);
+	}
+#endif
+	if (enable_cpu_a011_workaround) {
 		flush_dcache();
 		mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
 		sync();
@@ -447,11 +478,18 @@ skip_l2:
 
 #ifdef CONFIG_SYS_SRIO
 	srio_init();
-#ifdef CONFIG_SRIOBOOT_MASTER
-	srio_boot_master();
-#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
-	srio_boot_master_release_slave();
-#endif
+#ifdef CONFIG_FSL_CORENET
+	char *s = getenv("bootmaster");
+	if (s) {
+		if (!strcmp(s, "SRIO1")) {
+			srio_boot_master(1);
+			srio_boot_master_release_slave(1);
+		}
+		if (!strcmp(s, "SRIO2")) {
+			srio_boot_master(2);
+			srio_boot_master_release_slave(2);
+		}
+	}
 #endif
 #endif
 
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index 81961def1b7..ca4ed626457 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -32,9 +32,21 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	case 0:
 		ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
 		break;
+#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 	case 1:
 		ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
 		break;
+#endif
+#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+	case 2:
+		ddr = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+		break;
+#endif
+#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+	case 3:
+		ddr = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR;
+		break;
+#endif
 	default:
 		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
 		return;
@@ -43,6 +55,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	out_be32(&ddr->eor, regs->ddr_eor);
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	debug("Workaround for ERRATUM_DDR111_DDR134\n");
 	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
 		cs_sa = (regs->cs[i].bnds >> 16) & 0xfff;
 		cs_ea = regs->cs[i].bnds & 0xfff;
@@ -115,8 +128,12 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
 	out_be32(&ddr->err_disable, regs->err_disable);
 	out_be32(&ddr->err_int_en, regs->err_int_en);
-	for (i = 0; i < 32; i++)
-		out_be32(&ddr->debug[i], regs->debug[i]);
+	for (i = 0; i < 32; i++) {
+		if (regs->debug[i]) {
+			debug("Write to debug_%d as %08x\n", i+1, regs->debug[i]);
+			out_be32(&ddr->debug[i], regs->debug[i]);
+		}
+	}
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
 	out_be32(&ddr->debug[12], 0x00000015);
@@ -128,6 +145,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
 	out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
 #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
+	debug("Workaround for ERRATUM_DDR_A003\n");
 	if (regs->ddr_sdram_rcw_2 & 0x00f00000) {
 		out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2 & 0xf07fffff);
 		out_be32(&ddr->debug[2], 0x00000400);
@@ -209,6 +227,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	 * This erratum does not affect DDR3 mode, only for DDR2 mode.
 	 */
 #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
+	debug("Workaround for ERRATUM_DDR_115\n");
 	if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
 	    && in_be32(&ddr->sdram_cfg) & 0x80000) {
 		/* set DEBUG_1[31] */
@@ -216,6 +235,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	}
 #endif
 #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	debug("Workaround for ERRATUM_DDR111_DDR134\n");
 	/*
 	 * This is the combined workaround for DDR111 and DDR134
 	 * following the published errata for MPC8572
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 21c3ad49bfb..a0a9b4c5ae9 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -57,8 +57,9 @@ void ft_fixup_cpu(void *blob, u64 memory_limit)
 		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
 
 		if (reg) {
-			u64 val = *reg * SIZE_BOOT_ENTRY + spin_tbl_addr;
-			val = cpu_to_fdt32(val);
+			u32 phys_cpu_id = thread_to_core(*reg);
+			u64 val = phys_cpu_id * SIZE_BOOT_ENTRY + spin_tbl_addr;
+			val = cpu_to_fdt64(val);
 			if (*reg == id) {
 				fdt_setprop_string(blob, off, "status",
 								"okay");
@@ -534,7 +535,7 @@ void fdt_fixup_fman_firmware(void *blob)
 #define fdt_fixup_fman_firmware(x)
 #endif
 
-#if defined(CONFIG_PPC_P4080) || defined(CONFIG_PPC_P3060)
+#if defined(CONFIG_PPC_P4080)
 static void fdt_fixup_usb(void *fdt)
 {
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 4b52dad56ce..2a680603697 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -46,8 +46,6 @@
 
 static u32 serdes_prtcl_map;
 
-#define HWCONFIG_BUFFER_SIZE	128
-
 #ifdef DEBUG
 static const char *serdes_prtcl_str[] = {
 	[NONE] = "NA",
@@ -68,6 +66,7 @@ static const char *serdes_prtcl_str[] = {
 	[SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2",
 	[SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3",
 	[SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4",
+	[SGMII_FM2_DTSEC5] = "SGMII_FM2_DTSEC5",
 	[XAUI_FM1] = "XAUI_FM1",
 	[XAUI_FM2] = "XAUI_FM2",
 	[AURORA] = "DEBUG",
@@ -658,6 +657,7 @@ void fsl_serdes_init(void)
 		case SGMII_FM2_DTSEC2:
 		case SGMII_FM2_DTSEC3:
 		case SGMII_FM2_DTSEC4:
+		case SGMII_FM2_DTSEC5:
 		case XAUI_FM1:
 		case XAUI_FM2:
 		case SRIO1:
@@ -717,6 +717,10 @@ void fsl_serdes_init(void)
 			serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
 					    FSL_CORENET_DEVDISR2_DTSEC2_4;
 			break;
+		case SGMII_FM2_DTSEC5:
+			serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 |
+					    FSL_CORENET_DEVDISR2_DTSEC2_5;
+			break;
 		case XAUI_FM1:
 			serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1	|
 					    FSL_CORENET_DEVDISR2_10GEC1;
diff --git a/arch/powerpc/cpu/mpc85xx/p3060_ids.c b/arch/powerpc/cpu/mpc85xx/p3060_ids.c
deleted file mode 100644
index d32142f6369..00000000000
--- a/arch/powerpc/cpu/mpc85xx/p3060_ids.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-
-#ifdef CONFIG_SYS_DPAA_QBMAN
-struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
-	/* dqrr liodn, frame data liodn, liodn off, sdest */
-	SET_QP_INFO( 1,  2,  1, 0),
-	SET_QP_INFO( 3,  4,  2, 1),
-	SET_QP_INFO( 5,  6,  3, 2),
-	SET_QP_INFO( 7,  8,  4, 3),
-	SET_QP_INFO( 9, 10,  5, 4),
-	SET_QP_INFO(11, 12,  6, 5),
-	SET_QP_INFO(13, 14,  7, 6),
-	SET_QP_INFO(15, 16,  8, 7),
-	SET_QP_INFO(17, 18,  9, 0), /* for now sdest to 0 */
-	SET_QP_INFO(19, 20, 10, 0), /* for now sdest to 0 */
-};
-#endif
-
-struct srio_liodn_id_table srio_liodn_tbl[] = {
-	SET_SRIO_LIODN_1(1, 198),
-	SET_SRIO_LIODN_1(2, 199),
-};
-int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
-
-struct liodn_id_table liodn_tbl[] = {
-	SET_USB_LIODN(1, "fsl-usb2-mph", 127),
-	SET_USB_LIODN(2, "fsl-usb2-dr", 157),
-
-	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193),
-	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194),
-
-	SET_DMA_LIODN(1, 196),
-	SET_DMA_LIODN(2, 197),
-
-	SET_GUTS_LIODN("fsl,srio-rmu", 200, rmuliodnr, 0xd3000),
-
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	SET_QMAN_LIODN(31),
-	SET_BMAN_LIODN(32),
-#endif
-	SET_PME_LIODN(128),
-};
-int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
-
-#ifdef CONFIG_SYS_DPAA_FMAN
-struct liodn_id_table fman1_liodn_tbl[] = {
-	SET_FMAN_RX_1G_LIODN(1, 0, 11),
-	SET_FMAN_RX_1G_LIODN(1, 1, 12),
-	SET_FMAN_RX_1G_LIODN(1, 2, 13),
-	SET_FMAN_RX_1G_LIODN(1, 3, 14),
-};
-int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
-
-#if (CONFIG_SYS_NUM_FMAN == 2)
-struct liodn_id_table fman2_liodn_tbl[] = {
-	SET_FMAN_RX_1G_LIODN(2, 0, 16),
-	SET_FMAN_RX_1G_LIODN(2, 1, 17),
-	SET_FMAN_RX_1G_LIODN(2, 2, 18),
-	SET_FMAN_RX_1G_LIODN(2, 3, 19),
-};
-int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
-#endif
-#endif
-
-struct liodn_id_table sec_liodn_tbl[] = {
-	SET_SEC_JR_LIODN_ENTRY(0, 146, 154),
-	SET_SEC_JR_LIODN_ENTRY(1, 147, 155),
-	SET_SEC_JR_LIODN_ENTRY(2, 178, 186),
-	SET_SEC_JR_LIODN_ENTRY(3, 179, 187),
-	SET_SEC_RTIC_LIODN_ENTRY(a, 144),
-	SET_SEC_RTIC_LIODN_ENTRY(b, 145),
-	SET_SEC_RTIC_LIODN_ENTRY(c, 176),
-	SET_SEC_RTIC_LIODN_ENTRY(d, 177),
-	SET_SEC_DECO_LIODN_ENTRY(0, 129, 161),
-	SET_SEC_DECO_LIODN_ENTRY(1, 130, 162),
-	SET_SEC_DECO_LIODN_ENTRY(2, 131, 163),
-	SET_SEC_DECO_LIODN_ENTRY(3, 132, 164),
-	SET_SEC_DECO_LIODN_ENTRY(4, 133, 165),
-};
-int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
-
-struct liodn_id_table liodn_bases[] = {
-	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(96, 106),
-#ifdef CONFIG_SYS_DPAA_FMAN
-	[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32),
-#if (CONFIG_SYS_NUM_FMAN == 2)
-	[FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(64),
-#endif
-#endif
-#ifdef CONFIG_SYS_DPAA_PME
-	[FSL_HW_PORTAL_PME]   = SET_LIODN_BASE_2(116, 133),
-#endif
-};
diff --git a/arch/powerpc/cpu/mpc85xx/p3060_serdes.c b/arch/powerpc/cpu/mpc85xx/p3060_serdes.c
deleted file mode 100644
index e720dcf6bd3..00000000000
--- a/arch/powerpc/cpu/mpc85xx/p3060_serdes.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include "fsl_corenet_serdes.h"
-
-static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
-	[0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
-		  SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC1,
-		  SGMII_FM1_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2,
-		  NONE, NONE, AURORA, AURORA},
-	[0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, SGMII_FM2_DTSEC3,
-		  SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4,
-		  SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1, SGMII_FM2_DTSEC2,
-		  SGMII_FM1_DTSEC2, NONE, NONE, AURORA, AURORA},
-	[0x16] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1,
-		  AURORA, AURORA, SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1,
-		  SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2, SGMII_FM2_DTSEC3,
-		  SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4},
-	[0x19] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1,
-		  AURORA, AURORA, PCIE2, PCIE2, PCIE2, PCIE2, SGMII_FM2_DTSEC3,
-		  SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4},
-	[0x1c] = {NONE, NONE, SRIO1, SRIO2,  NONE, NONE, NONE, NONE,
-		  AURORA, AURORA, SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1,
-		  SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2, SGMII_FM2_DTSEC3,
-		  SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4},
-};
-
-enum srds_prtcl serdes_get_prtcl(int cfg, int lane)
-{
-	if (!serdes_lane_enabled(lane))
-		return NONE;
-
-	return serdes_cfg_tbl[cfg][lane];
-}
-
-int is_serdes_prtcl_valid(u32 prtcl)
-{
-	int i;
-
-	if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
-		return 0;
-
-	for (i = 0; i < SRDS_MAX_LANES; i++) {
-		if (serdes_cfg_tbl[prtcl][i] != NONE)
-			return 1;
-	}
-
-	return 0;
-}
-
-void soc_serdes_init(void)
-{
-	/*
-	 * On the P3060 the devdisr2 register does not correctly reflect
-	 * the state of the MACs based on the RCW fields. So disable the MACs
-	 * based on the srds_prtcl and ec1, ec2, ec3 fields
-	 */
-
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 devdisr2 = in_be32(&gur->devdisr2);
-	u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
-
-	/* NOTE: Leave FM1-1,FM1-2 alone for MDIO access */
-
-	if (!is_serdes_configured(SGMII_FM1_DTSEC3))
-		devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC1_3;
-
-	if (!is_serdes_configured(SGMII_FM1_DTSEC4))
-		devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC1_4;
-
-	if (!is_serdes_configured(SGMII_FM2_DTSEC1))
-		devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_1;
-
-	if (!is_serdes_configured(SGMII_FM2_DTSEC2))
-		devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_2;
-
-	if (!is_serdes_configured(SGMII_FM2_DTSEC3))
-		devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_3;
-
-	if (!is_serdes_configured(SGMII_FM2_DTSEC4))
-		devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_4;
-
-	if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
-		FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) {
-		devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC1_2;
-	}
-
-	if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
-		FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1) {
-		devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC2_1;
-	}
-
-	out_be32(&gur->devdisr2, devdisr2);
-}
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 1860684c11a..22e73e06610 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
  * Kumar Gala <kumar.gala@freescale.com>
  *
  * See file CREDITS for list of people who contributed to this
@@ -74,6 +74,33 @@ __secondary_start_page:
 	mtspr	977,r3
 #endif
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
+	mfspr	r3,SPRN_SVR
+	rlwinm	r3,r3,0,0xff
+	li	r4,CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV
+	cmpw	r3,r4
+	beq	1f
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2
+	li	r4,CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2
+	cmpw	r3,r4
+	beq	1f
+#endif
+
+	/* Not a supported revision affected by erratum */
+	b	2f
+
+1:	/* Erratum says set bits 55:60 to 001001 */
+	msync
+	isync
+	mfspr	r3,976
+	li	r4,0x48
+	rlwimi	r3,r4,0,0x1f8
+	mtspr	976,r3
+	isync
+2:
+#endif
+
 	/* Enable branch prediction */
 	lis	r3,BUCSR_ENABLE@h
 	ori	r3,r3,BUCSR_ENABLE@l
@@ -128,7 +155,27 @@ __secondary_start_page:
 
 	/* r10 has the base address for the entry */
 	mfspr	r0,SPRN_PIR
-#ifdef CONFIG_E500MC
+#if	defined(CONFIG_E6500)
+/*
+ * PIR definition for E6500
+ * 0-17 Reserved (logic 0s)
+ * 8-19 CHIP_ID,    2’b00      - SoC 1
+ *                  all others - reserved
+ * 20-24 CLUSTER_ID 5’b00000   - CCM 1
+ *                  all others - reserved
+ * 25-26 CORE_CLUSTER_ID 2’b00 - cluster 1
+ *                       2’b01 - cluster 2
+ *                       2’b10 - cluster 3
+ *                       2’b11 - cluster 4
+ * 27-28 CORE_ID         2’b00 - core 0
+ *                       2’b01 - core 1
+ *                       2’b10 - core 2
+ *                       2’b11 - core 3
+ * 29-31 THREAD_ID       3’b000 - thread 0
+ *                       3’b001 - thread 1
+ */
+	rlwinm  r4,r0,29,25,31
+#elif	defined(CONFIG_E500MC)
 	rlwinm	r4,r0,27,27,31
 #else
 	mr	r4,r0
@@ -143,6 +190,25 @@ __secondary_start_page:
 	mtspr	L1CSR2,r8
 #endif
 
+#ifdef CONFIG_E6500
+	mfspr	r0,SPRN_PIR
+	/*
+	 * core 0 thread 0: pir reset value 0x00, new pir 0
+	 * core 0 thread 1: pir reset value 0x01, new pir 1
+	 * core 1 thread 0: pir reset value 0x08, new pir 2
+	 * core 1 thread 1: pir reset value 0x09, new pir 3
+	 * core 2 thread 0: pir reset value 0x10, new pir 4
+	 * core 2 thread 1: pir reset value 0x11, new pir 5
+	 * etc.
+	 *
+	 * Only thread 0 of each core will be running, updating PIR doesn't
+	 * need to deal with the thread bits.
+	 */
+	rlwinm	r4,r0,30,24,30
+#endif
+
+	mtspr	SPRN_PIR,r4	/* write to PIR register */
+
 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
 	defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
 	/*
@@ -163,6 +229,12 @@ __secondary_start_page:
 	cmpw    r3,r5
 	bge     2f
 1:
+#ifdef	CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
+	lis	r3,toreset(enable_cpu_a011_workaround)@ha
+	lwz	r3,toreset(enable_cpu_a011_workaround)@l(r3)
+	cmpwi	r3,0
+	beq	2f
+#endif
 	mfspr	r3,L1CSR2
 	oris	r3,r3,(L1CSR2_DCWS)@h
 	mtspr	L1CSR2,r3
@@ -220,7 +292,7 @@ __secondary_start_page:
 	/* setup the entry */
 	li	r3,0
 	li	r8,1
-	stw	r0,ENTRY_PIR(r10)
+	stw	r4,ENTRY_PIR(r10)
 	stw	r3,ENTRY_ADDR_UPPER(r10)
 	stw	r8,ENTRY_ADDR_LOWER(r10)
 	stw	r3,ENTRY_R3_UPPER(r10)
@@ -346,6 +418,15 @@ __bootpg_addr:
 __spin_table:
 	.space CONFIG_MAX_CPUS*ENTRY_SIZE
 
+	/*
+	 * This variable is set by cpu_init_r() after parsing hwconfig
+	 * to enable workaround for erratum NMG_CPU_A011.
+	 */
+	.align L1_CACHE_SHIFT
+	.global enable_cpu_a011_workaround
+enable_cpu_a011_workaround:
+	.long	1
+
 	/* Fill in the empty space.  The actual reset vector is
 	 * the last word of the page */
 __secondary_start_code_end:
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index ce475324550..abfeb268d4d 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -186,8 +186,7 @@ void get_sys_info (sys_info_t * sysInfo)
 #endif
 
 #ifdef CONFIG_QE
-#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-    defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 	sysInfo->freqQE =  sysInfo->freqSystemBus;
 #else
 	qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 6aabc30c283..9e04257d2ca 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -86,6 +86,35 @@ _start_e500:
 	li	r1,MSR_DE
 	mtmsr 	r1
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
+	mfspr	r3,SPRN_SVR
+	rlwinm	r3,r3,0,0xff
+	li	r4,CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV
+	cmpw	r3,r4
+	beq	1f
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2
+	li	r4,CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2
+	cmpw	r3,r4
+	beq	1f
+#endif
+
+	/* Not a supported revision affected by erratum */
+	li	r27,0
+	b	2f
+
+1:	li	r27,1	/* Remember for later that we have the erratum */
+	/* Erratum says set bits 55:60 to 001001 */
+	msync
+	isync
+	mfspr	r3,976
+	li	r4,0x48
+	rlwimi	r3,r4,0,0x1f8
+	mtspr	976,r3
+	isync
+2:
+#endif
+
 #if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_E500MC)
 	/* ISBC uses L2 as stack.
 	 * Disable L2 cache here so that u-boot can enable it later
@@ -406,12 +435,11 @@ l2_disabled:
  * Search for the TLB that covers the code we're executing, and shrink it
  * so that it covers only this 4K page.  That will ensure that any other
  * TLB we create won't interfere with it.  We assume that the TLB exists,
- * which is why we don't check the Valid bit of MAS1.
+ * which is why we don't check the Valid bit of MAS1.  We also assume
+ * it is in TLB1.
  *
  * This is necessary, for example, when booting from the on-chip ROM,
  * which (oddly) creates a single 4GB TLB that covers CCSR and DDR.
- * If we don't shrink this TLB now, then we'll accidentally delete it
- * in "purge_old_ccsr_tlb" below.
  */
 	bl	nexti		/* Find our address */
 nexti:	mflr	r1		/* R1 = our PC */
@@ -421,11 +449,15 @@ nexti:	mflr	r1		/* R1 = our PC */
 	msync
 	tlbsx	0, r1		/* This must succeed */
 
+	mfspr	r14, MAS0	/* Save ESEL for later */
+	rlwinm	r14, r14, 16, 0xfff
+
 	/* Set the size of the TLB to 4KB */
 	mfspr	r3, MAS1
 	li	r2, 0xF00
 	andc	r3, r3, r2	/* Clear the TSIZE bits */
 	ori	r3, r3, MAS1_TSIZE(BOOKE_PAGESZ_4K)@l
+	oris	r3, r3, MAS1_IPROT@h
 	mtspr	MAS1, r3
 
 	/*
@@ -440,6 +472,14 @@ nexti:	mflr	r1		/* R1 = our PC */
 	mfspr	r2, MAS2
 	andc	r2, r2, r3
 	or	r2, r2, r1
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
+	cmpwi	r27,0
+	beq	1f
+	andi.	r15, r2, MAS2_I|MAS2_G /* save the old I/G for later */
+	rlwinm	r2, r2, 0, ~MAS2_I
+	ori	r2, r2, MAS2_G
+1:
+#endif
 	mtspr	MAS2, r2	/* Set the EPN to our PC base address */
 
 	mfspr	r2, MAS3
@@ -452,6 +492,39 @@ nexti:	mflr	r1		/* R1 = our PC */
 	tlbwe
 
 /*
+ * Clear out any other TLB entries that may exist, to avoid conflicts.
+ * Our TLB entry is in r14.
+ */
+	li	r0, TLBIVAX_ALL | TLBIVAX_TLB0
+	tlbivax 0, r0
+	tlbsync
+
+	mfspr	r4, SPRN_TLB1CFG
+	rlwinm	r4, r4, 0, TLBnCFG_NENTRY_MASK
+
+	li	r3, 0
+	mtspr	MAS1, r3
+1:	cmpw	r3, r14
+#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL)
+	cmpwi	cr1, r3, CONFIG_SYS_PPC_E500_DEBUG_TLB
+	cror	cr0*4+eq, cr0*4+eq, cr1*4+eq
+#endif
+	rlwinm	r5, r3, 16, MAS0_ESEL_MSK
+	addi	r3, r3, 1
+	beq	2f		/* skip the entry we're executing from */
+
+	oris	r5, r5, MAS0_TLBSEL(1)@h
+	mtspr	MAS0, r5
+
+	isync
+	tlbwe
+	isync
+	msync
+
+2:	cmpw	r3, r4
+	blt	1b
+
+/*
  * Relocate CCSR, if necessary.  We relocate CCSR if (obviously) the default
  * location is not where we want it.  This typically happens on a 36-bit
  * system, where we want to move CCSR to near the top of 36-bit address space.
@@ -469,41 +542,15 @@ nexti:	mflr	r1		/* R1 = our PC */
 #error "CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW) must be defined."
 #endif
 
-purge_old_ccsr_tlb:
-	lis	r8, CONFIG_SYS_CCSRBAR@h
-	ori	r8, r8, CONFIG_SYS_CCSRBAR@l
-	lis	r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h
-	ori	r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l
-
-	/*
-	 * In a multi-stage boot (e.g. NAND boot), a previous stage may have
-	 * created a TLB for CCSR, which will interfere with our relocation
-	 * code.  Since we're going to create a new TLB for CCSR anyway,
-	 * it should be safe to delete this old TLB here.  We have to search
-	 * for it, though.
-	 */
-
-	li	r1, 0
-	mtspr	MAS6, r1	/* Search the current address space and PID */
-	isync
-	msync
-	tlbsx	0, r8
-	mfspr	r1, MAS1
-	andis.  r2, r1, MAS1_VALID@h	/* Check for the Valid bit */
-	beq     1f			/* Skip if no TLB found */
-
-	rlwinm	r1, r1, 0, 1, 31	/* Clear Valid bit */
-	mtspr	MAS1, r1
-	isync
-	msync
-	tlbwe
-1:
-
 create_ccsr_new_tlb:
 	/*
 	 * Create a TLB for the new location of CCSR.  Register R8 is reserved
 	 * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR).
 	 */
+	lis	r8, CONFIG_SYS_CCSRBAR@h
+	ori	r8, r8, CONFIG_SYS_CCSRBAR@l
+	lis	r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h
+	ori	r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l
 	lis     r0, FSL_BOOKE_MAS0(0, 0, 0)@h
 	ori     r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
 	lis     r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
@@ -719,6 +766,253 @@ delete_temp_tlbs:
 	tlbwe
 #endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
+#define DCSR_LAWBARH0	(CONFIG_SYS_CCSRBAR + 0x1000)
+#define LAW_SIZE_1M	0x13
+#define DCSRBAR_LAWAR	(LAW_EN | (0x1d << 20) | LAW_SIZE_1M)
+
+	cmpwi	r27,0
+	beq	9f
+
+	/*
+	 * Create a TLB entry for CCSR
+	 *
+	 * We're executing out of TLB1 entry in r14, and that's the only
+	 * TLB entry that exists.  To allocate some TLB entries for our
+	 * own use, flip a bit high enough that we won't flip it again
+	 * via incrementing.
+	 */
+
+	xori	r8, r14, 32
+	lis	r0, MAS0_TLBSEL(1)@h
+	rlwimi	r0, r8, 16, MAS0_ESEL_MSK
+	lis	r1, FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)@h
+	ori	r1, r1, FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)@l
+	lis	r7, CONFIG_SYS_CCSRBAR@h
+	ori	r7, r7, CONFIG_SYS_CCSRBAR@l
+	ori	r2, r7, MAS2_I|MAS2_G
+	lis	r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h
+	ori	r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l
+	lis	r4, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h
+	ori	r4, r4, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
+	mtspr	MAS0, r0
+	mtspr	MAS1, r1
+	mtspr	MAS2, r2
+	mtspr	MAS3, r3
+	mtspr	MAS7, r4
+	isync
+	tlbwe
+	isync
+	msync
+
+	/* Map DCSR temporarily to physical address zero */
+	li	r0, 0
+	lis	r3, DCSRBAR_LAWAR@h
+	ori	r3, r3, DCSRBAR_LAWAR@l
+
+	stw	r0, 0xc00(r7)	/* LAWBARH0 */
+	stw	r0, 0xc04(r7)	/* LAWBARL0 */
+	sync
+	stw	r3, 0xc08(r7)	/* LAWAR0 */
+
+	/* Read back from LAWAR to ensure the update is complete. */
+	lwz	r3, 0xc08(r7)	/* LAWAR0 */
+	isync
+
+	/* Create a TLB entry for DCSR at zero */
+
+	addi	r9, r8, 1
+	lis	r0, MAS0_TLBSEL(1)@h
+	rlwimi	r0, r9, 16, MAS0_ESEL_MSK
+	lis	r1, FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h
+	ori	r1, r1, FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l
+	li	r6, 0	/* DCSR effective address */
+	ori	r2, r6, MAS2_I|MAS2_G
+	li	r3, MAS3_SW|MAS3_SR
+	li	r4, 0
+	mtspr	MAS0, r0
+	mtspr	MAS1, r1
+	mtspr	MAS2, r2
+	mtspr	MAS3, r3
+	mtspr	MAS7, r4
+	isync
+	tlbwe
+	isync
+	msync
+
+	/* enable the timebase */
+#define CTBENR	0xe2084
+	li	r3, 1
+	addis	r4, r7, CTBENR@ha
+	stw	r3, CTBENR@l(r4)
+	lwz	r3, CTBENR@l(r4)
+	twi	0,r3,0
+	isync
+
+	.macro	erratum_set_ccsr offset value
+	addis	r3, r7, \offset@ha
+	lis	r4, \value@h
+	addi	r3, r3, \offset@l
+	ori	r4, r4, \value@l
+	bl	erratum_set_value
+	.endm
+
+	.macro	erratum_set_dcsr offset value
+	addis	r3, r6, \offset@ha
+	lis	r4, \value@h
+	addi	r3, r3, \offset@l
+	ori	r4, r4, \value@l
+	bl	erratum_set_value
+	.endm
+
+	erratum_set_dcsr 0xb0e08 0xe0201800
+	erratum_set_dcsr 0xb0e18 0xe0201800
+	erratum_set_dcsr 0xb0e38 0xe0400000
+	erratum_set_dcsr 0xb0008 0x00900000
+	erratum_set_dcsr 0xb0e40 0xe00a0000
+	erratum_set_ccsr 0x18600 CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
+	erratum_set_ccsr 0x10f00 0x415e5000
+	erratum_set_ccsr 0x11f00 0x415e5000
+
+	/* Make temp mapping uncacheable again, if it was initially */
+	bl	2f
+2:	mflr	r3
+	tlbsx	0, r3
+	mfspr	r4, MAS2
+	rlwimi	r4, r15, 0, MAS2_I
+	rlwimi	r4, r15, 0, MAS2_G
+	mtspr	MAS2, r4
+	isync
+	tlbwe
+	isync
+	msync
+
+	/* Clear the cache */
+	lis	r3,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
+	ori	r3,r3,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
+	sync
+	isync
+	mtspr	SPRN_L1CSR1,r3
+	isync
+2:	sync
+	mfspr	r4,SPRN_L1CSR1
+	and.	r4,r4,r3
+	bne	2b
+
+	lis	r3,(L1CSR1_CPE|L1CSR1_ICE)@h
+	ori	r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
+	sync
+	isync
+	mtspr	SPRN_L1CSR1,r3
+	isync
+2:	sync
+	mfspr	r4,SPRN_L1CSR1
+	and.	r4,r4,r3
+	beq	2b
+
+	/* Remove temporary mappings */
+	lis	r0, MAS0_TLBSEL(1)@h
+	rlwimi	r0, r9, 16, MAS0_ESEL_MSK
+	li	r3, 0
+	mtspr	MAS0, r0
+	mtspr	MAS1, r3
+	isync
+	tlbwe
+	isync
+	msync
+
+	li	r3, 0
+	stw	r3, 0xc08(r7)	/* LAWAR0 */
+	lwz	r3, 0xc08(r7)
+	isync
+
+	lis	r0, MAS0_TLBSEL(1)@h
+	rlwimi	r0, r8, 16, MAS0_ESEL_MSK
+	li	r3, 0
+	mtspr	MAS0, r0
+	mtspr	MAS1, r3
+	isync
+	tlbwe
+	isync
+	msync
+
+	b	9f
+
+	/* r3 = addr, r4 = value, clobbers r5, r11, r12 */
+erratum_set_value:
+	/* Lock two cache lines into I-Cache */
+	sync
+	mfspr	r11, SPRN_L1CSR1
+	rlwinm	r11, r11, 0, ~L1CSR1_ICUL
+	sync
+	isync
+	mtspr	SPRN_L1CSR1, r11
+	isync
+
+	mflr	r12
+	bl	5f
+5:	mflr	r5
+	addi	r5, r5, 2f - 5b
+	icbtls	0, 0, r5
+	addi	r5, r5, 64
+
+	sync
+	mfspr	r11, SPRN_L1CSR1
+3:	andi.	r11, r11, L1CSR1_ICUL
+	bne	3b
+
+	icbtls	0, 0, r5
+	addi	r5, r5, 64
+
+	sync
+	mfspr	r11, SPRN_L1CSR1
+3:	andi.	r11, r11, L1CSR1_ICUL
+	bne	3b
+
+	b	2f
+	.align	6
+	/* Inside a locked cacheline, wait a while, write, then wait a while */
+2:	sync
+
+	mfspr	r5, SPRN_TBRL
+	addis	r11, r5, 0x10000@h /* wait 65536 timebase ticks */
+4:	mfspr	r5, SPRN_TBRL
+	subf.	r5, r5, r11
+	bgt	4b
+
+	stw	r4, 0(r3)
+
+	mfspr	r5, SPRN_TBRL
+	addis	r11, r5, 0x10000@h /* wait 65536 timebase ticks */
+4:	mfspr	r5, SPRN_TBRL
+	subf.	r5, r5, r11
+	bgt	4b
+
+	sync
+
+	/*
+	 * Fill out the rest of this cache line and the next with nops,
+	 * to ensure that nothing outside the locked area will be
+	 * fetched due to a branch.
+	 */
+	.rept 19
+	nop
+	.endr
+
+	sync
+	mfspr	r11, SPRN_L1CSR1
+	rlwinm	r11, r11, 0, ~L1CSR1_ICUL
+	sync
+	isync
+	mtspr	SPRN_L1CSR1, r11
+	isync
+
+	mtlr	r12
+	blr
+
+9:
+#endif
+
 create_init_ram_area:
 	lis     r6,FSL_BOOKE_MAS0(1, 15, 0)@h
 	ori     r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
@@ -855,18 +1149,12 @@ version_string:
 	.globl	_start_cont
 _start_cont:
 	/* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/
-	lis	r1,CONFIG_SYS_INIT_RAM_ADDR@h
-	ori	r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
-
+	lis	r3,(CONFIG_SYS_INIT_RAM_ADDR)@h
+	ori	r3,r3,((CONFIG_SYS_INIT_SP_OFFSET-16)&~0xf)@l /* Align to 16 */
 	li	r0,0
-	stwu	r0,-4(r1)
-	stwu	r0,-4(r1)		/* Terminate call chain */
-
-	stwu	r1,-8(r1)		/* Save back chain and move SP */
-	lis	r0,RESET_VECTOR@h	/* Address of reset vector */
-	ori	r0,r0,RESET_VECTOR@l
-	stwu	r1,-8(r1)		/* Save back chain and move SP */
-	stw	r0,+12(r1)		/* Save return addr (underflow vect) */
+	stw	r0,0(r3)	/* Terminate Back Chain */
+	stw	r0,+4(r3)	/* NULL return address. */
+	mr	r1,r3		/* Transfer to SP(r1) */
 
 	GET_GOT
 	bl	cpu_init_early_f
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index cbc674211aa..78a8f926b38 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -57,8 +57,6 @@ struct cpu_type cpu_type_list [] = {
 	CPU_TYPE_ENTRY(P1012, P1012, 1),
 	CPU_TYPE_ENTRY(P1013, P1013, 1),
 	CPU_TYPE_ENTRY(P1014, P1014, 1),
-	CPU_TYPE_ENTRY(P1015, P1015, 1),
-	CPU_TYPE_ENTRY(P1016, P1016, 1),
 	CPU_TYPE_ENTRY(P1017, P1017, 1),
 	CPU_TYPE_ENTRY(P1020, P1020, 2),
 	CPU_TYPE_ENTRY(P1021, P1021, 2),
@@ -71,7 +69,6 @@ struct cpu_type cpu_type_list [] = {
 	CPU_TYPE_ENTRY(P2040, P2040, 4),
 	CPU_TYPE_ENTRY(P2041, P2041, 4),
 	CPU_TYPE_ENTRY(P3041, P3041, 4),
-	CPU_TYPE_ENTRY_MASK(P3060, P3060, 6, 0xf3),
 	CPU_TYPE_ENTRY(P4040, P4040, 4),
 	CPU_TYPE_ENTRY(P4080, P4080, 8),
 	CPU_TYPE_ENTRY(P5010, P5010, 1),
@@ -85,7 +82,39 @@ struct cpu_type cpu_type_list [] = {
 #endif
 };
 
-struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 1);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+u32 compute_ppc_cpumask(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	int i = 0, count = 0;
+	u32 cluster, mask = 0;
+
+	do {
+		int j;
+		cluster = in_be32(&gur->tp_cluster[i++].lower);
+		for (j = 0; j < 4; j++) {
+			u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
+			u32 type = in_be32(&gur->tp_ityp[idx]);
+
+			if (type & TP_ITYP_AV) {
+				if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_PPC)
+					mask |= 1 << count;
+			}
+			count++;
+		}
+	} while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
+
+	return mask;
+}
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+/*
+ * Before chassis genenration 2, the cpumask should be hard-coded.
+ * In case of cpu type unknown or cpumask unset, use 1 as fail save.
+ */
+#define compute_ppc_cpumask()	1
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0);
 
 struct cpu_type *identify_cpu(u32 ver)
 {
@@ -113,6 +142,9 @@ u32 cpu_mask()
 	return ((in_be32(&pic->frr) & MPC8xxx_PICFRR_NCPU_MASK) >>
 			MPC8xxx_PICFRR_NCPU_SHIFT) + 1;
 
+	if (cpu->num_cores == 0)
+		return compute_ppc_cpumask();
+
 	return cpu->mask;
 }
 
@@ -120,13 +152,14 @@ u32 cpu_mask()
  * Return the number of cores on this SOC.
  */
 int cpu_numcores() {
-	ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR;
 	struct cpu_type *cpu = gd->cpu;
 
-	/* better to query feature reporting register than just assume 1 */
-	if (cpu == &cpu_type_unknown)
-		return ((in_be32(&pic->frr) & MPC8xxx_PICFRR_NCPU_MASK) >>
-			MPC8xxx_PICFRR_NCPU_SHIFT) + 1;
+	/*
+	 * Report # of cores in terms of the cpu_mask if we haven't
+	 * figured out how many there are yet
+	 */
+	if (cpu->num_cores == 0)
+		return hweight32(cpu_mask());
 
 	return cpu->num_cores;
 }
@@ -138,9 +171,7 @@ int cpu_numcores() {
  */
 int is_core_valid(unsigned int core)
 {
-	struct cpu_type *cpu = gd->cpu;
-
-	return !!((1 << core) & cpu->mask);
+	return !!((1 << core) & cpu_mask());
 }
 
 int probecpu (void)
@@ -156,6 +187,19 @@ int probecpu (void)
 	return 0;
 }
 
+/* Once in memory, compute mask & # cores once and save them off */
+int fixup_cpu(void)
+{
+	struct cpu_type *cpu = gd->cpu;
+
+	if (cpu->num_cores == 0) {
+		cpu->mask = cpu_mask();
+		cpu->num_cores = cpu_numcores();
+	}
+
+	return 0;
+}
+
 /*
  * Initializes on-chip ethernet controllers.
  * to override, implement board_eth_init()
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index 2067d53ad28..2592873c9f0 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
@@ -151,8 +151,19 @@ static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr,
 		if (dimm_params[dimm_number].n_ranks > 0) {
 			go_config = 1;
 			/* These fields only available in CS0_CONFIG */
-			intlv_en = popts->memctl_interleaving;
-			intlv_ctl = popts->memctl_interleaving_mode;
+			if (!popts->memctl_interleaving)
+				break;
+			switch (popts->memctl_interleaving_mode) {
+			case FSL_DDR_CACHE_LINE_INTERLEAVING:
+			case FSL_DDR_PAGE_INTERLEAVING:
+			case FSL_DDR_BANK_INTERLEAVING:
+			case FSL_DDR_SUPERBANK_INTERLEAVING:
+				intlv_en = popts->memctl_interleaving;
+				intlv_ctl = popts->memctl_interleaving_mode;
+				break;
+			default:
+				break;
+			}
 		}
 		break;
 	case 1:
@@ -302,29 +313,41 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
 
 /* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */
 static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
+			       const memctl_options_t *popts,
 			       const common_timing_params_t *common_dimm,
 			       unsigned int cas_latency)
 {
+	/* Extended precharge to activate interval (tRP) */
+	unsigned int ext_pretoact = 0;
 	/* Extended Activate to precharge interval (tRAS) */
 	unsigned int ext_acttopre = 0;
-	unsigned int ext_refrec; /* Extended refresh recovery time (tRFC) */
-	unsigned int ext_caslat = 0; /* Extended MCAS latency from READ cmd */
-	unsigned int cntl_adj = 0; /* Control Adjust */
-
-	/* If the tRAS > 19 MCLK, we use the ext mode */
-	if (picos_to_mclk(common_dimm->tRAS_ps) > 0x13)
-		ext_acttopre = 1;
-
+	/* Extended activate to read/write interval (tRCD) */
+	unsigned int ext_acttorw = 0;
+	/* Extended refresh recovery time (tRFC) */
+	unsigned int ext_refrec;
+	/* Extended MCAS latency from READ cmd */
+	unsigned int ext_caslat = 0;
+	/* Extended last data to precharge interval (tWR) */
+	unsigned int ext_wrrec = 0;
+	/* Control Adjust */
+	unsigned int cntl_adj = 0;
+
+	ext_pretoact = picos_to_mclk(common_dimm->tRP_ps) >> 4;
+	ext_acttopre = picos_to_mclk(common_dimm->tRAS_ps) >> 4;
+	ext_acttorw = picos_to_mclk(common_dimm->tRCD_ps) >> 4;
+	ext_caslat = (2 * cas_latency - 1) >> 4;
 	ext_refrec = (picos_to_mclk(common_dimm->tRFC_ps) - 8) >> 4;
-
-	/* If the CAS latency more than 8, use the ext mode */
-	if (cas_latency > 8)
-		ext_caslat = 1;
+	/* ext_wrrec only deals with 16 clock and above, or 14 with OTF */
+	ext_wrrec = (picos_to_mclk(common_dimm->tWR_ps) +
+		(popts->OTF_burst_chop_en ? 2 : 0)) >> 4;
 
 	ddr->timing_cfg_3 = (0
-		| ((ext_acttopre & 0x1) << 24)
-		| ((ext_refrec & 0xF) << 16)
-		| ((ext_caslat & 0x1) << 12)
+		| ((ext_pretoact & 0x1) << 28)
+		| ((ext_acttopre & 0x2) << 24)
+		| ((ext_acttorw & 0x1) << 22)
+		| ((ext_refrec & 0x1F) << 16)
+		| ((ext_caslat & 0x3) << 12)
+		| ((ext_wrrec & 0x1) << 8)
 		| ((cntl_adj & 0x7) << 0)
 		);
 	debug("FSLDDR: timing_cfg_3 = 0x%08x\n", ddr->timing_cfg_3);
@@ -386,15 +409,16 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
 	 * we need set extend bit for it at
 	 * TIMING_CFG_3[EXT_CASLAT]
 	 */
-	if (cas_latency > 8)
-		cas_latency -= 8;
 	caslat_ctrl = 2 * cas_latency - 1;
 #endif
 
 	refrec_ctrl = picos_to_mclk(common_dimm->tRFC_ps) - 8;
 	wrrec_mclk = picos_to_mclk(common_dimm->tWR_ps);
 
-	wrrec_mclk = wrrec_table[wrrec_mclk - 1];
+	if (wrrec_mclk > 16)
+		printf("Error: WRREC doesn't support more than 16 clocks\n");
+	else
+		wrrec_mclk = wrrec_table[wrrec_mclk - 1];
 	if (popts->OTF_burst_chop_en)
 		wrrec_mclk += 2;
 
@@ -825,7 +849,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
 
 	/* Mode Register - MR0 */
 	unsigned int dll_on;	/* DLL control for precharge PD, 0=off, 1=on */
-	unsigned int wr;	/* Write Recovery */
+	unsigned int wr = 0;	/* Write Recovery */
 	unsigned int dll_rst;	/* DLL Reset */
 	unsigned int mode;	/* Normal=0 or Test=1 */
 	unsigned int caslat = 4;/* CAS# latency, default set as 6 cycles */
@@ -885,24 +909,37 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
 	dll_on = 1;
 
 	wr_mclk = (common_dimm->tWR_ps + mclk_ps - 1) / mclk_ps;
-	wr = wr_table[wr_mclk - 5];
+	if (wr_mclk <= 16) {
+		wr = wr_table[wr_mclk - 5];
+	} else {
+		printf("Error: unsupported write recovery for mode register "
+		       "wr_mclk = %d\n", wr_mclk);
+	}
 
 	dll_rst = 0;	/* dll no reset */
 	mode = 0;	/* normal mode */
 
 	/* look up table to get the cas latency bits */
-	if (cas_latency >= 5 && cas_latency <= 11) {
-		unsigned char cas_latency_table[7] = {
+	if (cas_latency >= 5 && cas_latency <= 16) {
+		unsigned char cas_latency_table[] = {
 			0x2,	/* 5 clocks */
 			0x4,	/* 6 clocks */
 			0x6,	/* 7 clocks */
 			0x8,	/* 8 clocks */
 			0xa,	/* 9 clocks */
 			0xc,	/* 10 clocks */
-			0xe	/* 11 clocks */
+			0xe,	/* 11 clocks */
+			0x1,	/* 12 clocks */
+			0x3,	/* 13 clocks */
+			0x5,	/* 14 clocks */
+			0x7,	/* 15 clocks */
+			0x9,	/* 16 clocks */
 		};
 		caslat = cas_latency_table[cas_latency - 5];
+	} else {
+		printf("Error: unsupported cas latency for mode register\n");
 	}
+
 	bt = 0;	/* Nibble sequential */
 
 	switch (popts->burst_length) {
@@ -930,6 +967,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
 		  | ((mode & 0x1) << 7)
 		  | (((caslat >> 1) & 0x7) << 4)
 		  | ((bt & 0x1) << 3)
+		  | ((caslat & 1) << 2)
 		  | ((bl & 0x3) << 0)
 		  );
 
@@ -1399,73 +1437,37 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 
 	/* Chip Select Memory Bounds (CSn_BNDS) */
 	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-		unsigned long long ea = 0, sa = 0;
+		unsigned long long ea, sa;
 		unsigned int cs_per_dimm
 			= CONFIG_CHIP_SELECTS_PER_CTRL / CONFIG_DIMM_SLOTS_PER_CTLR;
 		unsigned int dimm_number
 			= i / cs_per_dimm;
 		unsigned long long rank_density
-			= dimm_params[dimm_number].rank_density;
+			= dimm_params[dimm_number].rank_density >> dbw_cap_adj;
 
-		if (((i == 1) && (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1)) ||
-			((i == 2) && (popts->ba_intlv_ctl & 0x04)) ||
-			((i == 3) && (popts->ba_intlv_ctl & FSL_DDR_CS2_CS3))) {
-			/*
-			 * Don't set up boundaries for unused CS
-			 * cs1 for cs0_cs1, cs0_cs1_and_cs2_cs3, cs0_cs1_cs2_cs3
-			 * cs2 for cs0_cs1_cs2_cs3
-			 * cs3 for cs2_cs3, cs0_cs1_and_cs2_cs3, cs0_cs1_cs2_cs3
-			 * But we need to set the ODT_RD_CFG and
-			 * ODT_WR_CFG for CS1_CONFIG here.
-			 */
-			set_csn_config(dimm_number, i, ddr, popts, dimm_params);
-			continue;
-		}
 		if (dimm_params[dimm_number].n_ranks == 0) {
 			debug("Skipping setup of CS%u "
 				"because n_ranks on DIMM %u is 0\n", i, dimm_number);
 			continue;
 		}
-		if (popts->memctl_interleaving && popts->ba_intlv_ctl) {
-			/*
-			 * This works superbank 2CS
-			 * There are 2 or more memory controllers configured
-			 * identically, memory is interleaved between them,
-			 * and each controller uses rank interleaving within
-			 * itself. Therefore the starting and ending address
-			 * on each controller is twice the amount present on
-			 * each controller. If any CS is not included in the
-			 * interleaving, the memory on that CS is not accssible
-			 * and the total memory size is reduced. The CS is also
-			 * disabled.
-			 */
-			unsigned long long ctlr_density = 0;
+		if (popts->memctl_interleaving) {
 			switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
+			case FSL_DDR_CS0_CS1_CS2_CS3:
+				break;
 			case FSL_DDR_CS0_CS1:
 			case FSL_DDR_CS0_CS1_AND_CS2_CS3:
-				ctlr_density = dimm_params[0].rank_density * 2;
 				if (i > 1)
 					cs_en = 0;
 				break;
 			case FSL_DDR_CS2_CS3:
-				ctlr_density = dimm_params[0].rank_density;
+			default:
 				if (i > 0)
 					cs_en = 0;
 				break;
-			case FSL_DDR_CS0_CS1_CS2_CS3:
-				/*
-				 * The four CS interleaving should have been verified by
-				 * populate_memctl_options()
-				 */
-				ctlr_density = dimm_params[0].rank_density * 4;
-				break;
-			default:
-				break;
 			}
-			ea = (CONFIG_NUM_DDR_CONTROLLERS *
-				(ctlr_density >> dbw_cap_adj)) - 1;
-		}
-		else if (!popts->memctl_interleaving && popts->ba_intlv_ctl) {
+			sa = common_dimm->base_address;
+			ea = common_dimm->total_mem - 1;
+		} else if (!popts->memctl_interleaving) {
 			/*
 			 * If memory interleaving between controllers is NOT
 			 * enabled, the starting address for each memory
@@ -1477,49 +1479,40 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 			 */
 			switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
 			case FSL_DDR_CS0_CS1_CS2_CS3:
-				/* CS0+CS1+CS2+CS3 interleaving, only CS0_CNDS
-				 * needs to be set.
-				 */
 				sa = common_dimm->base_address;
-				ea = sa + (4 * (rank_density >> dbw_cap_adj))-1;
+				ea = common_dimm->total_mem - 1;
 				break;
 			case FSL_DDR_CS0_CS1_AND_CS2_CS3:
-				/* CS0+CS1 and CS2+CS3 interleaving, CS0_CNDS
-				 * and CS2_CNDS need to be set.
-				 */
-				if ((i == 2) && (dimm_number == 0)) {
+				if ((i >= 2) && (dimm_number == 0)) {
 					sa = dimm_params[dimm_number].base_address +
-					      2 * (rank_density >> dbw_cap_adj);
-					ea = sa + 2 * (rank_density >> dbw_cap_adj) - 1;
+					      2 * rank_density;
+					ea = sa + 2 * rank_density - 1;
 				} else {
 					sa = dimm_params[dimm_number].base_address;
-					ea = sa + (2 * (rank_density >>
-						dbw_cap_adj)) - 1;
+					ea = sa + 2 * rank_density - 1;
 				}
 				break;
 			case FSL_DDR_CS0_CS1:
-				/* CS0+CS1 interleaving, CS0_CNDS needs
-				 * to be set
-				 */
 				if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) {
 					sa = dimm_params[dimm_number].base_address;
-					ea = sa + (rank_density >> dbw_cap_adj) - 1;
-					sa += (i % cs_per_dimm) * (rank_density >> dbw_cap_adj);
-					ea += (i % cs_per_dimm) * (rank_density >> dbw_cap_adj);
+					ea = sa + rank_density - 1;
+					if (i != 1)
+						sa += (i % cs_per_dimm) * rank_density;
+					ea += (i % cs_per_dimm) * rank_density;
 				} else {
 					sa = 0;
 					ea = 0;
 				}
 				if (i == 0)
-					ea += (rank_density >> dbw_cap_adj);
+					ea += rank_density;
 				break;
 			case FSL_DDR_CS2_CS3:
-				/* CS2+CS3 interleaving*/
 				if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) {
 					sa = dimm_params[dimm_number].base_address;
-					ea = sa + (rank_density >> dbw_cap_adj) - 1;
-					sa += (i % cs_per_dimm) * (rank_density >> dbw_cap_adj);
-					ea += (i % cs_per_dimm) * (rank_density >> dbw_cap_adj);
+					ea = sa + rank_density - 1;
+					if (i != 3)
+						sa += (i % cs_per_dimm) * rank_density;
+					ea += (i % cs_per_dimm) * rank_density;
 				} else {
 					sa = 0;
 					ea = 0;
@@ -1528,38 +1521,18 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 					ea += (rank_density >> dbw_cap_adj);
 				break;
 			default:  /* No bank(chip-select) interleaving */
+				sa = dimm_params[dimm_number].base_address;
+				ea = sa + rank_density - 1;
+				if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) {
+					sa += (i % cs_per_dimm) * rank_density;
+					ea += (i % cs_per_dimm) * rank_density;
+				} else {
+					sa = 0;
+					ea = 0;
+				}
 				break;
 			}
 		}
-		else if (popts->memctl_interleaving && !popts->ba_intlv_ctl) {
-			/*
-			 * Only the rank on CS0 of each memory controller may
-			 * be used if memory controller interleaving is used
-			 * without rank interleaving within each memory
-			 * controller.  However, the ending address programmed
-			 * into each CS0 must be the sum of the amount of
-			 * memory in the two CS0 ranks.
-			 */
-			if (i == 0) {
-				ea = (2 * (rank_density >> dbw_cap_adj)) - 1;
-			}
-
-		}
-		else if (!popts->memctl_interleaving && !popts->ba_intlv_ctl) {
-			/*
-			 * No rank interleaving and no memory controller
-			 * interleaving.
-			 */
-			sa = dimm_params[dimm_number].base_address;
-			ea = sa + (rank_density >> dbw_cap_adj) - 1;
-			if (dimm_params[dimm_number].n_ranks > (i % cs_per_dimm)) {
-				sa += (i % cs_per_dimm) * (rank_density >> dbw_cap_adj);
-				ea += (i % cs_per_dimm) * (rank_density >> dbw_cap_adj);
-			} else {
-				sa = 0;
-				ea = 0;
-			}
-		}
 
 		sa >>= 24;
 		ea >>= 24;
@@ -1574,7 +1547,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 			set_csn_config(dimm_number, i, ddr, popts, dimm_params);
 			set_csn_config_2(i, ddr);
 		} else
-			printf("CS%d is disabled.\n", i);
+			debug("CS%d is disabled.\n", i);
 	}
 
 	/*
@@ -1590,7 +1563,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 	set_timing_cfg_0(ddr, popts);
 #endif
 
-	set_timing_cfg_3(ddr, common_dimm, cas_latency);
+	set_timing_cfg_3(ddr, popts, common_dimm, cas_latency);
 	set_timing_cfg_1(ddr, popts, common_dimm, cas_latency);
 	set_timing_cfg_2(ddr, popts, common_dimm,
 				cas_latency, additive_latency);
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
index d0a546610ee..3e7c269e402 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
  *	Dave Liu <daveliu@freescale.com>
  *
  * calculate the organization and timing parameter
@@ -90,6 +90,7 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 {
 	unsigned int retval;
 	unsigned int mtb_ps;
+	int ftb_10th_ps;
 	int i;
 
 	if (spd->mem_type) {
@@ -197,6 +198,14 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	pdimm->mtb_ps = mtb_ps;
 
 	/*
+	 * FTB - fine timebase
+	 * use 1/10th of ps as our unit to avoid floating point
+	 * eg, 10 for 1ps, 25 for 2.5ps, 50 for 5ps
+	 */
+	ftb_10th_ps =
+		((spd->ftb_div & 0xf0) >> 4) * 10 / (spd->ftb_div & 0x0f);
+	pdimm->ftb_10th_ps = ftb_10th_ps;
+	/*
 	 * sdram minimum cycle time
 	 * we assume the MTB is 0.125ns
 	 * eg:
@@ -204,7 +213,8 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	 *        =12 MTB (1.5ns) ->DDR3-1333
 	 *        =10 MTB (1.25ns) ->DDR3-1600
 	 */
-	pdimm->tCKmin_X_ps = spd->tCK_min * mtb_ps;
+	pdimm->tCKmin_X_ps = spd->tCK_min * mtb_ps +
+		(spd->fine_tCK_min * ftb_10th_ps) / 10;
 
 	/*
 	 * CAS latency supported
@@ -222,7 +232,8 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	 * DDR3-1333H	108 MTB (13.5ns)
 	 * DDR3-1600H	90 MTB (11.25ns)
 	 */
-	pdimm->tAA_ps = spd->tAA_min * mtb_ps;
+	pdimm->tAA_ps = spd->tAA_min * mtb_ps +
+		(spd->fine_tAA_min * ftb_10th_ps) / 10;
 
 	/*
 	 * min write recovery time
@@ -239,7 +250,8 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	 * DDR3-1333H	108 MTB (13.5ns)
 	 * DDR3-1600H	90 MTB (11.25)
 	 */
-	pdimm->tRCD_ps = spd->tRCD_min * mtb_ps;
+	pdimm->tRCD_ps = spd->tRCD_min * mtb_ps +
+		(spd->fine_tRCD_min * ftb_10th_ps) / 10;
 
 	/*
 	 * min row active to row active delay time
@@ -257,7 +269,8 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	 * DDR3-1333H	108 MTB (13.5ns)
 	 * DDR3-1600H	90 MTB (11.25ns)
 	 */
-	pdimm->tRP_ps = spd->tRP_min * mtb_ps;
+	pdimm->tRP_ps = spd->tRP_min * mtb_ps +
+		(spd->fine_tRP_min * ftb_10th_ps) / 10;
 
 	/* min active to precharge delay time
 	 * eg: tRAS_min =
@@ -277,7 +290,7 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	 * DDR3-1600H	370 MTB (46.25ns)
 	 */
 	pdimm->tRC_ps = (((spd->tRAS_tRC_ext & 0xf0) << 4) | spd->tRC_min_lsb)
-			* mtb_ps;
+			* mtb_ps + (spd->fine_tRC_min * ftb_10th_ps) / 10;
 	/*
 	 * min refresh recovery delay time
 	 * eg: tRFC_min =
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
index 5b724371f60..f59d1051bfe 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -1047,7 +1047,7 @@ void ddr3_spd_dump(const ddr3_spd_eeprom_t *spd)
 
 	/* General Section: Bytes 0-59 */
 
-#define PRINT_NXS(x, y, z...) printf("%-3d    : %02x " z "\n", x, y);
+#define PRINT_NXS(x, y, z...) printf("%-3d    : %02x " z "\n", x, (u8)y);
 #define PRINT_NNXXS(n0, n1, x0, x1, s) \
 	printf("%-3d-%3d: %02x %02x " s "\n", n0, n1, x0, x1);
 
@@ -1121,11 +1121,21 @@ void ddr3_spd_dump(const ddr3_spd_eeprom_t *spd)
 		"therm_sensor  SDRAM Thermal Sensor");
 	PRINT_NXS(33, spd->device_type,
 		"device_type  SDRAM Device Type");
-
-	printf("%-3d-%3d: ",  34, 59);  /* Reserved, General Section */
-
-	for (i = 34; i <= 59; i++)
-		printf("%02x ", spd->res_34_59[i - 34]);
+	PRINT_NXS(34, spd->fine_tCK_min,
+		"fine_tCK_min  Fine offset for tCKmin");
+	PRINT_NXS(35, spd->fine_tAA_min,
+		"fine_tAA_min  Fine offset for tAAmin");
+	PRINT_NXS(36, spd->fine_tRCD_min,
+		"fine_tRCD_min Fine offset for tRCDmin");
+	PRINT_NXS(37, spd->fine_tRP_min,
+		"fine_tRP_min  Fine offset for tRPmin");
+	PRINT_NXS(38, spd->fine_tRC_min,
+		"fine_tRC_min  Fine offset for tRCmin");
+
+	printf("%-3d-%3d: ",  39, 59);  /* Reserved, General Section */
+
+	for (i = 39; i <= 59; i++)
+		printf("%02x ", spd->res_39_59[i - 39]);
 
 	puts("\n");
 
@@ -1388,7 +1398,7 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo)
 		 * No need to worry for buffer overflow here in
 		 * this function;  readline() maxes out at CFG_CBSIZE
 		 */
-		readline_into_buffer(prompt,  buffer);
+		readline_into_buffer(prompt, buffer, 0);
 		argc = parse_line(buffer, argv);
 		if (argc == 0)
 			continue;
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index 20c7db03ede..03a784cd479 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -27,8 +27,10 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
 
 	/* compute the common CAS latency supported between slots */
 	tmp = dimm_params[0].caslat_X;
-	for (i = 1; i < number_of_dimms; i++)
-		 tmp &= dimm_params[i].caslat_X;
+	for (i = 1; i < number_of_dimms; i++) {
+		if (dimm_params[i].n_ranks)
+			tmp &= dimm_params[i].caslat_X;
+	}
 	common_caslat = tmp;
 
 	/* compute the max tAAmin tCKmin between slots */
@@ -491,5 +493,15 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
 	 */
 	outpdimm->additive_latency = additive_latency;
 
+	debug("tCKmin_ps = %u\n", outpdimm->tCKmin_X_ps);
+	debug("tRCD_ps   = %u\n", outpdimm->tRCD_ps);
+	debug("tRP_ps    = %u\n", outpdimm->tRP_ps);
+	debug("tRAS_ps   = %u\n", outpdimm->tRAS_ps);
+	debug("tWR_ps    = %u\n", outpdimm->tWR_ps);
+	debug("tWTR_ps   = %u\n", outpdimm->tWTR_ps);
+	debug("tRFC_ps   = %u\n", outpdimm->tRFC_ps);
+	debug("tRRD_ps   = %u\n", outpdimm->tRRD_ps);
+	debug("tRC_ps    = %u\n", outpdimm->tRC_ps);
+
 	return 0;
 }
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index c2a03e334cf..b47268c20ea 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -15,13 +15,15 @@
 #include <common.h>
 #include <i2c.h>
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_law.h>
 
 #include "ddr.h"
 
-extern void fsl_ddr_set_lawbar(
+void fsl_ddr_set_lawbar(
 		const common_timing_params_t *memctl_common_params,
 		unsigned int memctl_interleaved,
 		unsigned int ctrl_num);
+void fsl_ddr_set_intl3r(const unsigned int granule_size);
 
 /* processor specific function */
 extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
@@ -51,6 +53,22 @@ u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
 	[1][0] = SPD_EEPROM_ADDRESS3,	/* controller 2 */
 	[1][1] = SPD_EEPROM_ADDRESS4,	/* controller 2 */
 };
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 3) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
+	[0][0] = SPD_EEPROM_ADDRESS1,	/* controller 1 */
+	[1][0] = SPD_EEPROM_ADDRESS2,	/* controller 2 */
+	[2][0] = SPD_EEPROM_ADDRESS3,	/* controller 3 */
+};
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 3) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
+	[0][0] = SPD_EEPROM_ADDRESS1,	/* controller 1 */
+	[0][1] = SPD_EEPROM_ADDRESS2,	/* controller 1 */
+	[1][0] = SPD_EEPROM_ADDRESS3,	/* controller 2 */
+	[1][1] = SPD_EEPROM_ADDRESS4,	/* controller 2 */
+	[2][0] = SPD_EEPROM_ADDRESS5,	/* controller 3 */
+	[2][1] = SPD_EEPROM_ADDRESS6,	/* controller 3 */
+};
+
 #endif
 
 static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
@@ -156,12 +174,12 @@ const char * step_to_string(unsigned int step) {
 	return step_string_tbl[s];
 }
 
-int step_assign_addresses(fsl_ddr_info_t *pinfo,
-			  unsigned int dbw_cap_adj[],
-			  unsigned int *all_memctl_interleaving,
-			  unsigned int *all_ctlr_rank_interleaving)
+unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo,
+			  unsigned int dbw_cap_adj[])
 {
 	int i, j;
+	unsigned long long total_mem, current_mem_base, total_ctlr_mem;
+	unsigned long long rank_density, ctlr_density = 0;
 
 	/*
 	 * If a reduced data width is requested, but the SPD
@@ -220,86 +238,108 @@ int step_assign_addresses(fsl_ddr_info_t *pinfo,
 				"specified controller %u\n", i);
 			return 1;
 		}
+		debug("dbw_cap_adj[%d]=%d\n", i, dbw_cap_adj[i]);
 	}
 
-	j = 0;
-	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
-		if (pinfo->memctl_opts[i].memctl_interleaving)
-			j++;
-	/*
-	 * Not support less than all memory controllers interleaving
-	 * if more than two controllers
-	 */
-	if (j == CONFIG_NUM_DDR_CONTROLLERS)
-		*all_memctl_interleaving = 1;
-
-	/* Check that all controllers are rank interleaving. */
-	j = 0;
-	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
-		if (pinfo->memctl_opts[i].ba_intlv_ctl)
-			j++;
-	/*
-	 * All memory controllers must be populated to qualify for
-	 * all controller rank interleaving
-	 */
-	 if (j == CONFIG_NUM_DDR_CONTROLLERS)
-		*all_ctlr_rank_interleaving = 1;
-
-	if (*all_memctl_interleaving) {
-		unsigned long long addr, total_mem_per_ctlr = 0;
-		/*
-		 * If interleaving between memory controllers,
-		 * make each controller start at a base address
-		 * of 0.
-		 *
-		 * Also, if bank interleaving (chip select
-		 * interleaving) is enabled on each memory
-		 * controller, CS0 needs to be programmed to
-		 * cover the entire memory range on that memory
-		 * controller
-		 *
-		 * Bank interleaving also implies that each
-		 * addressed chip select is identical in size.
-		 */
-
+	current_mem_base = 0ull;
+	total_mem = 0;
+	if (pinfo->memctl_opts[0].memctl_interleaving) {
+		rank_density = pinfo->dimm_params[0][0].rank_density >>
+					dbw_cap_adj[0];
+		switch (pinfo->memctl_opts[0].ba_intlv_ctl &
+					FSL_DDR_CS0_CS1_CS2_CS3) {
+		case FSL_DDR_CS0_CS1_CS2_CS3:
+			ctlr_density = 4 * rank_density;
+			break;
+		case FSL_DDR_CS0_CS1:
+		case FSL_DDR_CS0_CS1_AND_CS2_CS3:
+			ctlr_density = 2 * rank_density;
+			break;
+		case FSL_DDR_CS2_CS3:
+		default:
+			ctlr_density = rank_density;
+			break;
+		}
+		debug("rank density is 0x%llx, ctlr density is 0x%llx\n",
+			rank_density, ctlr_density);
 		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
-			addr = 0;
-			pinfo->common_timing_params[i].base_address = 0ull;
-			for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
-				unsigned long long cap
-					= pinfo->dimm_params[i][j].capacity;
-
-				pinfo->dimm_params[i][j].base_address = addr;
-				addr += cap >> dbw_cap_adj[i];
-				total_mem_per_ctlr += cap >> dbw_cap_adj[i];
+			if (pinfo->memctl_opts[i].memctl_interleaving) {
+				switch (pinfo->memctl_opts[i].memctl_interleaving_mode) {
+				case FSL_DDR_CACHE_LINE_INTERLEAVING:
+				case FSL_DDR_PAGE_INTERLEAVING:
+				case FSL_DDR_BANK_INTERLEAVING:
+				case FSL_DDR_SUPERBANK_INTERLEAVING:
+					total_ctlr_mem = 2 * ctlr_density;
+					break;
+				case FSL_DDR_3WAY_1KB_INTERLEAVING:
+				case FSL_DDR_3WAY_4KB_INTERLEAVING:
+				case FSL_DDR_3WAY_8KB_INTERLEAVING:
+					total_ctlr_mem = 3 * ctlr_density;
+					break;
+				case FSL_DDR_4WAY_1KB_INTERLEAVING:
+				case FSL_DDR_4WAY_4KB_INTERLEAVING:
+				case FSL_DDR_4WAY_8KB_INTERLEAVING:
+					total_ctlr_mem = 4 * ctlr_density;
+					break;
+				default:
+					panic("Unknown interleaving mode");
+				}
+				pinfo->common_timing_params[i].base_address =
+							current_mem_base;
+				pinfo->common_timing_params[i].total_mem =
+							total_ctlr_mem;
+				total_mem = current_mem_base + total_ctlr_mem;
+				debug("ctrl %d base 0x%llx\n", i, current_mem_base);
+				debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
+			} else {
+				/* when 3rd controller not interleaved */
+				current_mem_base = total_mem;
+				total_ctlr_mem = 0;
+				pinfo->common_timing_params[i].base_address =
+							current_mem_base;
+				for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+					unsigned long long cap =
+						pinfo->dimm_params[i][j].capacity >> dbw_cap_adj[i];
+					pinfo->dimm_params[i][j].base_address =
+						current_mem_base;
+					debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base);
+					current_mem_base += cap;
+					total_ctlr_mem += cap;
+				}
+				debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
+				pinfo->common_timing_params[i].total_mem =
+							total_ctlr_mem;
+				total_mem += total_ctlr_mem;
 			}
 		}
-		pinfo->common_timing_params[0].total_mem = total_mem_per_ctlr;
 	} else {
 		/*
 		 * Simple linear assignment if memory
 		 * controllers are not interleaved.
 		 */
-		unsigned long long cur_memsize = 0;
 		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
-			u64 total_mem_per_ctlr = 0;
+			total_ctlr_mem = 0;
 			pinfo->common_timing_params[i].base_address =
-						cur_memsize;
+						current_mem_base;
 			for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
 				/* Compute DIMM base addresses. */
 				unsigned long long cap =
-					pinfo->dimm_params[i][j].capacity;
+					pinfo->dimm_params[i][j].capacity >> dbw_cap_adj[i];
 				pinfo->dimm_params[i][j].base_address =
-					cur_memsize;
-				cur_memsize += cap >> dbw_cap_adj[i];
-				total_mem_per_ctlr += cap >> dbw_cap_adj[i];
+					current_mem_base;
+				debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base);
+				current_mem_base += cap;
+				total_ctlr_mem += cap;
 			}
+			debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
 			pinfo->common_timing_params[i].total_mem =
-							total_mem_per_ctlr;
+							total_ctlr_mem;
+			total_mem += total_ctlr_mem;
 		}
 	}
+	debug("Total mem by %s is 0x%llx\n", __func__, total_mem);
 
-	return 0;
+	return total_mem;
 }
 
 unsigned long long
@@ -307,8 +347,6 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
 				       unsigned int size_only)
 {
 	unsigned int i, j;
-	unsigned int all_controllers_memctl_interleaving = 0;
-	unsigned int all_controllers_rank_interleaving = 0;
 	unsigned long long total_mem = 0;
 
 	fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg;
@@ -345,9 +383,10 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
 
 				retval = compute_dimm_parameters(spd, pdimm, i);
 #ifdef CONFIG_SYS_DDR_RAW_TIMING
-				if (retval != 0) {
-					printf("SPD error! Trying fallback to "
-					"raw timing calculation\n");
+				if (!i && !j && retval) {
+					printf("SPD error on controller %d! "
+					"Trying fallback to raw timing "
+					"calculation\n", i);
 					fsl_ddr_get_dimm_params(pdimm, i, j);
 				}
 #else
@@ -407,17 +446,14 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
 					&pinfo->memctl_opts[i],
 					pinfo->dimm_params[i], i);
 		}
-		check_interleaving_options(pinfo);
 	case STEP_ASSIGN_ADDRESSES:
 		/* STEP 5:  Assign addresses to chip selects */
-		step_assign_addresses(pinfo,
-				dbw_capacity_adjust,
-				&all_controllers_memctl_interleaving,
-				&all_controllers_rank_interleaving);
+		check_interleaving_options(pinfo);
+		total_mem = step_assign_addresses(pinfo, dbw_capacity_adjust);
 
 	case STEP_COMPUTE_REGS:
 		/* STEP 6:  compute controller register values */
-		debug("FSL Memory ctrl cg register computation\n");
+		debug("FSL Memory ctrl register computation\n");
 		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 			if (timing_params[i].ndimms_present == 0) {
 				memset(&ddr_reg[i], 0,
@@ -437,21 +473,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
 		break;
 	}
 
-	/* Compute the total amount of memory. */
-
-	/*
-	 * If bank interleaving but NOT memory controller interleaving
-	 * CS_BNDS describe the quantity of memory on each memory
-	 * controller, so the total is the sum across.
-	 */
-	if (!all_controllers_memctl_interleaving
-	    && all_controllers_rank_interleaving) {
-		total_mem = 0;
-		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
-			total_mem += timing_params[i].total_mem;
-		}
-
-	} else {
+	{
 		/*
 		 * Compute the amount of memory available just by
 		 * looking for the highest valid CSn_BNDS value.
@@ -489,7 +511,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
 phys_size_t fsl_ddr_sdram(void)
 {
 	unsigned int i;
-	unsigned int memctl_interleaved;
+	unsigned int law_memctl = LAW_TRGT_IF_DDR_1;
 	unsigned long long total_memory;
 	fsl_ddr_info_t info;
 
@@ -504,34 +526,6 @@ phys_size_t fsl_ddr_sdram(void)
 #endif
 		total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
 
-	/* Check for memory controller interleaving. */
-	memctl_interleaved = 0;
-	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
-		memctl_interleaved +=
-			info.memctl_opts[i].memctl_interleaving;
-	}
-
-	if (memctl_interleaved) {
-		if (memctl_interleaved == CONFIG_NUM_DDR_CONTROLLERS) {
-			debug("memctl interleaving\n");
-			/*
-			 * Change the meaning of memctl_interleaved
-			 * to be "boolean".
-			 */
-			memctl_interleaved = 1;
-		} else {
-			printf("Warning: memctl interleaving not "
-				"properly configured on all controllers\n");
-			memctl_interleaved = 0;
-			for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
-				info.memctl_opts[i].memctl_interleaving = 0;
-			debug("Recomputing with memctl_interleaving off.\n");
-			total_memory = fsl_ddr_compute(&info,
-						       STEP_ASSIGN_ADDRESSES,
-						       0);
-		}
-	}
-
 	/* Program configuration registers. */
 	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 		debug("Programming controller %u\n", i);
@@ -544,24 +538,69 @@ phys_size_t fsl_ddr_sdram(void)
 		fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i);
 	}
 
-	if (memctl_interleaved) {
-		const unsigned int ctrl_num = 0;
-
-		/* Only set LAWBAR1 if memory controller interleaving is on. */
-		fsl_ddr_set_lawbar(&info.common_timing_params[0],
-					 memctl_interleaved, ctrl_num);
-	} else {
-		/*
-		 * Memory controller interleaving is NOT on;
-		 * set each lawbar individually.
-		 */
-		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+	/* program LAWs */
+	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+		if (info.memctl_opts[i].memctl_interleaving) {
+			switch (info.memctl_opts[i].memctl_interleaving_mode) {
+			case FSL_DDR_CACHE_LINE_INTERLEAVING:
+			case FSL_DDR_PAGE_INTERLEAVING:
+			case FSL_DDR_BANK_INTERLEAVING:
+			case FSL_DDR_SUPERBANK_INTERLEAVING:
+				if (i == 0) {
+					law_memctl = LAW_TRGT_IF_DDR_INTRLV;
+					fsl_ddr_set_lawbar(&info.common_timing_params[i],
+						law_memctl, i);
+				} else if (i == 2) {
+					law_memctl = LAW_TRGT_IF_DDR_INTLV_34;
+					fsl_ddr_set_lawbar(&info.common_timing_params[i],
+						law_memctl, i);
+				}
+				break;
+			case FSL_DDR_3WAY_1KB_INTERLEAVING:
+			case FSL_DDR_3WAY_4KB_INTERLEAVING:
+			case FSL_DDR_3WAY_8KB_INTERLEAVING:
+				law_memctl = LAW_TRGT_IF_DDR_INTLV_123;
+				if (i == 0) {
+					fsl_ddr_set_intl3r(info.memctl_opts[i].memctl_interleaving_mode);
+					fsl_ddr_set_lawbar(&info.common_timing_params[i],
+						law_memctl, i);
+				}
+				break;
+			case FSL_DDR_4WAY_1KB_INTERLEAVING:
+			case FSL_DDR_4WAY_4KB_INTERLEAVING:
+			case FSL_DDR_4WAY_8KB_INTERLEAVING:
+				law_memctl = LAW_TRGT_IF_DDR_INTLV_1234;
+				if (i == 0)
+					fsl_ddr_set_lawbar(&info.common_timing_params[i],
+						law_memctl, i);
+				/* place holder for future 4-way interleaving */
+				break;
+			default:
+				break;
+			}
+		} else {
+			switch (i) {
+			case 0:
+				law_memctl = LAW_TRGT_IF_DDR_1;
+				break;
+			case 1:
+				law_memctl = LAW_TRGT_IF_DDR_2;
+				break;
+			case 2:
+				law_memctl = LAW_TRGT_IF_DDR_3;
+				break;
+			case 3:
+				law_memctl = LAW_TRGT_IF_DDR_4;
+				break;
+			default:
+				break;
+			}
 			fsl_ddr_set_lawbar(&info.common_timing_params[i],
-						 0, i);
+					law_memctl, i);
 		}
 	}
 
-	debug("total_memory = %llu\n", total_memory);
+	debug("total_memory by %s = %llu\n", __func__, total_memory);
 
 #if !defined(CONFIG_PHYS_64BIT)
 	/* Check for 4G or more.  Bad. */
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
index 00ec57be1ff..13e48252742 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008, 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008, 2010-2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
@@ -19,7 +19,6 @@
  * This is pretty fragile on both the use of stack and if the buffer is big
  * enough. However we will get a warning from getenv_f for the later.
  */
-#define HWCONFIG_BUFFER_SIZE	128
 
 /* Board-specific functions defined in each board's ddr.c */
 extern void fsl_ddr_board_options(memctl_options_t *popts,
@@ -790,46 +789,97 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
 	 * should be a subset of the requested configuration.
 	 */
 #if (CONFIG_NUM_DDR_CONTROLLERS > 1)
-	if (hwconfig_sub_f("fsl_ddr", "ctlr_intlv", buf)) {
-		if (pdimm[0].n_ranks == 0) {
-			printf("There is no rank on CS0 for controller %d. Because only"
-				" rank on CS0 and ranks chip-select interleaved with CS0"
-				" are controller interleaved, force non memory "
-				"controller interleaving\n", ctrl_num);
-			popts->memctl_interleaving = 0;
-		} else {
-			popts->memctl_interleaving = 1;
-			/*
-			 * test null first. if CONFIG_HWCONFIG is not defined
-			 * hwconfig_arg_cmp returns non-zero
-			 */
-			if (hwconfig_subarg_cmp_f("fsl_ddr", "ctlr_intlv",
-						    "null", buf)) {
-				popts->memctl_interleaving = 0;
-				debug("memory controller interleaving disabled.\n");
-			} else if (hwconfig_subarg_cmp_f("fsl_ddr",
-							 "ctlr_intlv",
-							 "cacheline", buf))
-				popts->memctl_interleaving_mode =
-					FSL_DDR_CACHE_LINE_INTERLEAVING;
-			else if (hwconfig_subarg_cmp_f("fsl_ddr", "ctlr_intlv",
-						       "page", buf))
-				popts->memctl_interleaving_mode =
-					FSL_DDR_PAGE_INTERLEAVING;
-			else if (hwconfig_subarg_cmp_f("fsl_ddr", "ctlr_intlv",
-						       "bank", buf))
-				popts->memctl_interleaving_mode =
-					FSL_DDR_BANK_INTERLEAVING;
-			else if (hwconfig_subarg_cmp_f("fsl_ddr", "ctlr_intlv",
-						       "superbank", buf))
-				popts->memctl_interleaving_mode =
-					FSL_DDR_SUPERBANK_INTERLEAVING;
-			else {
-				popts->memctl_interleaving = 0;
-				printf("hwconfig has unrecognized parameter for ctlr_intlv.\n");
-			}
-		}
+	if (!hwconfig_sub_f("fsl_ddr", "ctlr_intlv", buf))
+		goto done;
+
+	if (pdimm[0].n_ranks == 0) {
+		printf("There is no rank on CS0 for controller %d.\n", ctrl_num);
+		popts->memctl_interleaving = 0;
+		goto done;
+	}
+	popts->memctl_interleaving = 1;
+	/*
+	 * test null first. if CONFIG_HWCONFIG is not defined
+	 * hwconfig_arg_cmp returns non-zero
+	 */
+	if (hwconfig_subarg_cmp_f("fsl_ddr", "ctlr_intlv",
+				    "null", buf)) {
+		popts->memctl_interleaving = 0;
+		debug("memory controller interleaving disabled.\n");
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"cacheline", buf)) {
+		popts->memctl_interleaving_mode =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : FSL_DDR_CACHE_LINE_INTERLEAVING;
+		popts->memctl_interleaving =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : 1;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"page", buf)) {
+		popts->memctl_interleaving_mode =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : FSL_DDR_PAGE_INTERLEAVING;
+		popts->memctl_interleaving =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : 1;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"bank", buf)) {
+		popts->memctl_interleaving_mode =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : FSL_DDR_BANK_INTERLEAVING;
+		popts->memctl_interleaving =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : 1;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"superbank", buf)) {
+		popts->memctl_interleaving_mode =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : FSL_DDR_SUPERBANK_INTERLEAVING;
+		popts->memctl_interleaving =
+			((CONFIG_NUM_DDR_CONTROLLERS == 3) && ctrl_num == 2) ?
+			0 : 1;
+#if (CONFIG_NUM_DDR_CONTROLLERS == 3)
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"3way_1KB", buf)) {
+		popts->memctl_interleaving_mode =
+			FSL_DDR_3WAY_1KB_INTERLEAVING;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"3way_4KB", buf)) {
+		popts->memctl_interleaving_mode =
+			FSL_DDR_3WAY_4KB_INTERLEAVING;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"3way_8KB", buf)) {
+		popts->memctl_interleaving_mode =
+			FSL_DDR_3WAY_8KB_INTERLEAVING;
+#elif (CONFIG_NUM_DDR_CONTROLLERS == 4)
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"4way_1KB", buf)) {
+		popts->memctl_interleaving_mode =
+			FSL_DDR_4WAY_1KB_INTERLEAVING;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"4way_4KB", buf)) {
+		popts->memctl_interleaving_mode =
+			FSL_DDR_4WAY_4KB_INTERLEAVING;
+	} else if (hwconfig_subarg_cmp_f("fsl_ddr",
+					"ctlr_intlv",
+					"4way_8KB", buf)) {
+		popts->memctl_interleaving_mode =
+			FSL_DDR_4WAY_8KB_INTERLEAVING;
+#endif
+	} else {
+		popts->memctl_interleaving = 0;
+		printf("hwconfig has unrecognized parameter for ctlr_intlv.\n");
 	}
+done:
 #endif
 	if ((hwconfig_sub_f("fsl_ddr", "bank_intlv", buf)) &&
 		(CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
@@ -859,20 +909,20 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
 				popts->ba_intlv_ctl = 0;
 				printf("Not enough bank(chip-select) for "
 					"CS0+CS1+CS2+CS3 on controller %d, "
-					"force non-interleaving!\n", ctrl_num);
+					"interleaving disabled!\n", ctrl_num);
 			}
 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
 			if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
 				popts->ba_intlv_ctl = 0;
 				printf("Not enough bank(chip-select) for "
 					"CS0+CS1+CS2+CS3 on controller %d, "
-					"force non-interleaving!\n", ctrl_num);
+					"interleaving disabled!\n", ctrl_num);
 			}
 			if (pdimm[0].capacity != pdimm[1].capacity) {
 				popts->ba_intlv_ctl = 0;
 				printf("Not identical DIMM size for "
 					"CS0+CS1+CS2+CS3 on controller %d, "
-					"force non-interleaving!\n", ctrl_num);
+					"interleaving disabled!\n", ctrl_num);
 			}
 #endif
 			break;
@@ -881,7 +931,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
 				popts->ba_intlv_ctl = 0;
 				printf("Not enough bank(chip-select) for "
 					"CS0+CS1 on controller %d, "
-					"force non-interleaving!\n", ctrl_num);
+					"interleaving disabled!\n", ctrl_num);
 			}
 			break;
 		case FSL_DDR_CS2_CS3:
@@ -889,13 +939,13 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
 			if (pdimm[0].n_ranks < 4) {
 				popts->ba_intlv_ctl = 0;
 				printf("Not enough bank(chip-select) for CS2+CS3 "
-					"on controller %d, force non-interleaving!\n", ctrl_num);
+					"on controller %d, interleaving disabled!\n", ctrl_num);
 			}
 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
 			if (pdimm[1].n_ranks < 2) {
 				popts->ba_intlv_ctl = 0;
 				printf("Not enough bank(chip-select) for CS2+CS3 "
-					"on controller %d, force non-interleaving!\n", ctrl_num);
+					"on controller %d, interleaving disabled!\n", ctrl_num);
 			}
 #endif
 			break;
@@ -905,14 +955,14 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
 				popts->ba_intlv_ctl = 0;
 				printf("Not enough bank(CS) for CS0+CS1 and "
 					"CS2+CS3 on controller %d, "
-					"force non-interleaving!\n", ctrl_num);
+					"interleaving disabled!\n", ctrl_num);
 			}
 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
 			if ((pdimm[0].n_ranks < 2) || (pdimm[1].n_ranks < 2)) {
 				popts->ba_intlv_ctl = 0;
 				printf("Not enough bank(CS) for CS0+CS1 and "
 					"CS2+CS3 on controller %d, "
-					"force non-interleaving!\n", ctrl_num);
+					"interleaving disabled!\n", ctrl_num);
 			}
 #endif
 			break;
@@ -954,33 +1004,73 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
 
 void check_interleaving_options(fsl_ddr_info_t *pinfo)
 {
-	int i, j, check_n_ranks, intlv_fixed = 0;
+	int i, j, k, check_n_ranks, intlv_invalid = 0;
+	unsigned int check_intlv, check_n_row_addr, check_n_col_addr;
 	unsigned long long check_rank_density;
+	struct dimm_params_s *dimm;
 	/*
 	 * Check if all controllers are configured for memory
 	 * controller interleaving. Identical dimms are recommended. At least
-	 * the size should be checked.
+	 * the size, row and col address should be checked.
 	 */
 	j = 0;
 	check_n_ranks = pinfo->dimm_params[0][0].n_ranks;
 	check_rank_density = pinfo->dimm_params[0][0].rank_density;
+	check_n_row_addr =  pinfo->dimm_params[0][0].n_row_addr;
+	check_n_col_addr = pinfo->dimm_params[0][0].n_col_addr;
+	check_intlv = pinfo->memctl_opts[0].memctl_interleaving_mode;
 	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
-		if ((pinfo->memctl_opts[i].memctl_interleaving) && \
-		    (check_rank_density == pinfo->dimm_params[i][0].rank_density) && \
-		    (check_n_ranks == pinfo->dimm_params[i][0].n_ranks)) {
+		dimm = &pinfo->dimm_params[i][0];
+		if (!pinfo->memctl_opts[i].memctl_interleaving) {
+			continue;
+		} else if (((check_rank_density != dimm->rank_density) ||
+		     (check_n_ranks != dimm->n_ranks) ||
+		     (check_n_row_addr != dimm->n_row_addr) ||
+		     (check_n_col_addr != dimm->n_col_addr) ||
+		     (check_intlv !=
+			pinfo->memctl_opts[i].memctl_interleaving_mode))){
+			intlv_invalid = 1;
+			break;
+		} else {
 			j++;
 		}
+
 	}
-	if (j != CONFIG_NUM_DDR_CONTROLLERS) {
+	if (intlv_invalid) {
 		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
-			if (pinfo->memctl_opts[i].memctl_interleaving) {
+			pinfo->memctl_opts[i].memctl_interleaving = 0;
+		printf("Not all DIMMs are identical. "
+			"Memory controller interleaving disabled.\n");
+	} else {
+		switch (check_intlv) {
+		case FSL_DDR_CACHE_LINE_INTERLEAVING:
+		case FSL_DDR_PAGE_INTERLEAVING:
+		case FSL_DDR_BANK_INTERLEAVING:
+		case FSL_DDR_SUPERBANK_INTERLEAVING:
+			if (3 == CONFIG_NUM_DDR_CONTROLLERS)
+				k = 2;
+			else
+				k = CONFIG_NUM_DDR_CONTROLLERS;
+			break;
+		case FSL_DDR_3WAY_1KB_INTERLEAVING:
+		case FSL_DDR_3WAY_4KB_INTERLEAVING:
+		case FSL_DDR_3WAY_8KB_INTERLEAVING:
+		case FSL_DDR_4WAY_1KB_INTERLEAVING:
+		case FSL_DDR_4WAY_4KB_INTERLEAVING:
+		case FSL_DDR_4WAY_8KB_INTERLEAVING:
+		default:
+			k = CONFIG_NUM_DDR_CONTROLLERS;
+			break;
+		}
+		debug("%d of %d controllers are interleaving.\n", j, k);
+		if (j != k) {
+			for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
 				pinfo->memctl_opts[i].memctl_interleaving = 0;
-				intlv_fixed = 1;
-			}
-		if (intlv_fixed)
-			printf("Not all DIMMs are identical in size. "
-				"Memory controller interleaving disabled.\n");
+			printf("Not all controllers have compatible "
+				"interleaving mode. All disabled.\n");
+		}
 	}
+	debug("Checking interleaving options completed\n");
 }
 
 int fsl_use_spd(void)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index eb6a17a8503..664ad09298f 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -79,7 +79,7 @@ unsigned int mclk_to_picos(unsigned int mclk)
 
 void
 __fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
-			   unsigned int memctl_interleaved,
+			   unsigned int law_memctl,
 			   unsigned int ctrl_num)
 {
 	unsigned long long base = memctl_common_params->base_address;
@@ -98,28 +98,13 @@ __fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
 	if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
 		size = CONFIG_MAX_MEM_MAPPED - base;
 #endif
-
-	if (ctrl_num == 0) {
-		/*
-		 * Set up LAW for DDR controller 1 space.
-		 */
-		unsigned int lawbar1_target_id = memctl_interleaved
-			? LAW_TRGT_IF_DDR_INTRLV : LAW_TRGT_IF_DDR_1;
-
-		if (set_ddr_laws(base, size, lawbar1_target_id) < 0) {
-			printf("%s: ERROR (ctrl #0, intrlv=%d)\n", __func__,
-				memctl_interleaved);
-			return ;
-		}
-	} else if (ctrl_num == 1) {
-		if (set_ddr_laws(base, size, LAW_TRGT_IF_DDR_2) < 0) {
-			printf("%s: ERROR (ctrl #1)\n", __func__);
-			return ;
-		}
-	} else {
-		printf("%s: unexpected DDR controller number (%u)\n", __func__,
-			ctrl_num);
+	if (set_ddr_laws(base, size, law_memctl) < 0) {
+		printf("%s: ERROR (ctrl #%d, TRGT ID=%x)\n", __func__, ctrl_num,
+			law_memctl);
+		return ;
 	}
+	debug("setup ddr law base = 0x%llx, size 0x%llx, TRGT_ID 0x%x\n",
+		base, size, law_memctl);
 }
 
 __attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
@@ -127,6 +112,15 @@ fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
 			 unsigned int memctl_interleaved,
 			 unsigned int ctrl_num);
 
+void fsl_ddr_set_intl3r(const unsigned int granule_size)
+{
+#ifdef CONFIG_E6500
+	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
+	*mcintl3r = 0x80000000 | (granule_size & 0x1f);
+	debug("Enable MCINTL3R with granule size 0x%x\n", granule_size);
+#endif
+}
+
 void board_add_ram_info(int use_default)
 {
 #if defined(CONFIG_MPC83xx)
@@ -137,6 +131,9 @@ void board_add_ram_info(int use_default)
 #elif defined(CONFIG_MPC86xx)
 	ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR);
 #endif
+#if	defined(CONFIG_E6500) && (CONFIG_NUM_DDR_CONTROLLERS == 3)
+	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
+#endif
 #if (CONFIG_NUM_DDR_CONTROLLERS > 1)
 	uint32_t cs0_config = in_be32(&ddr->cs0_config);
 #endif
@@ -180,7 +177,29 @@ void board_add_ram_info(int use_default)
 	else
 		puts(", ECC off)");
 
-#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if (CONFIG_NUM_DDR_CONTROLLERS == 3)
+#ifdef CONFIG_E6500
+	if (*mcintl3r & 0x80000000) {
+		puts("\n");
+		puts("       DDR Controller Interleaving Mode: ");
+		switch (*mcintl3r & 0x1f) {
+		case FSL_DDR_3WAY_1KB_INTERLEAVING:
+			puts("3-way 1KB");
+			break;
+		case FSL_DDR_3WAY_4KB_INTERLEAVING:
+			puts("3-way 4KB");
+			break;
+		case FSL_DDR_3WAY_8KB_INTERLEAVING:
+			puts("3-way 8KB");
+			break;
+		default:
+			puts("3-way UNKNOWN");
+			break;
+		}
+	}
+#endif
+#endif
+#if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
 	if (cs0_config & 0x20000000) {
 		puts("\n");
 		puts("       DDR Controller Interleaving Mode: ");
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 09810be7d30..32ab0509622 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -62,8 +62,9 @@ void ft_fixup_num_cores(void *blob) {
 	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 	while (off != -FDT_ERR_NOTFOUND) {
 		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+		u32 phys_cpu_id = thread_to_core(*reg);
 
-		if (!is_core_valid(*reg) || is_core_disabled(*reg)) {
+		if (!is_core_valid(phys_cpu_id) || is_core_disabled(phys_cpu_id)) {
 			int ph = fdt_get_phandle(blob, off);
 
 			/* Delete the cpu node once there are no cpu handles */
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
index 66824960d3f..56b319f5d4b 100644
--- a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
@@ -44,12 +44,18 @@ void init_early_memctl_regs(void)
 	set_ifc_ftim(IFC_CS0, IFC_FTIM3, CONFIG_SYS_CS0_FTIM3);
 
 #if !defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) || defined(CONFIG_SYS_RAMBOOT)
+#ifdef CONFIG_SYS_CSPR0_EXT
+	set_ifc_cspr_ext(IFC_CS0, CONFIG_SYS_CSPR0_EXT);
+#endif
 	set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0);
 	set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0);
 	set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0);
 #endif
 #endif
 
+#ifdef CONFIG_SYS_CSPR1_EXT
+	set_ifc_cspr_ext(IFC_CS1, CONFIG_SYS_CSPR1_EXT);
+#endif
 #if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1)
 	set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0);
 	set_ifc_ftim(IFC_CS1, IFC_FTIM1, CONFIG_SYS_CS1_FTIM1);
@@ -61,6 +67,9 @@ void init_early_memctl_regs(void)
 	set_ifc_cspr(IFC_CS1, CONFIG_SYS_CSPR1);
 #endif
 
+#ifdef CONFIG_SYS_CSPR2_EXT
+	set_ifc_cspr_ext(IFC_CS2, CONFIG_SYS_CSPR2_EXT);
+#endif
 #if defined(CONFIG_SYS_CSPR2) && defined(CONFIG_SYS_CSOR2)
 	set_ifc_ftim(IFC_CS2, IFC_FTIM0, CONFIG_SYS_CS2_FTIM0);
 	set_ifc_ftim(IFC_CS2, IFC_FTIM1, CONFIG_SYS_CS2_FTIM1);
@@ -72,6 +81,9 @@ void init_early_memctl_regs(void)
 	set_ifc_cspr(IFC_CS2, CONFIG_SYS_CSPR2);
 #endif
 
+#ifdef CONFIG_SYS_CSPR3_EXT
+	set_ifc_cspr_ext(IFC_CS3, CONFIG_SYS_CSPR3_EXT);
+#endif
 #if defined(CONFIG_SYS_CSPR3) && defined(CONFIG_SYS_CSOR3)
 	set_ifc_ftim(IFC_CS3, IFC_FTIM0, CONFIG_SYS_CS3_FTIM0);
 	set_ifc_ftim(IFC_CS3, IFC_FTIM1, CONFIG_SYS_CS3_FTIM1);
diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c
index c7f394972bf..0cb65b32e48 100644
--- a/arch/powerpc/cpu/mpc8xxx/srio.c
+++ b/arch/powerpc/cpu/mpc8xxx/srio.c
@@ -95,126 +95,92 @@ void srio_init(void)
 	}
 }
 
-#ifdef CONFIG_SRIOBOOT_MASTER
-void srio_boot_master(void)
+#ifdef CONFIG_FSL_CORENET
+void srio_boot_master(int port)
 {
 	struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
 
 	/* set port accept-all */
-	out_be32((void *)&srio->impl.port[CONFIG_SRIOBOOT_MASTER_PORT].ptaacr,
+	out_be32((void *)&srio->impl.port[port - 1].ptaacr,
 				SRIO_PORT_ACCEPT_ALL);
 
-	debug("SRIOBOOT - MASTER: Master port [ %d ] for srio boot.\n",
-			CONFIG_SRIOBOOT_MASTER_PORT);
+	debug("SRIOBOOT - MASTER: Master port [ %d ] for srio boot.\n", port);
 	/* configure inbound window for slave's u-boot image */
 	debug("SRIOBOOT - MASTER: Inbound window for slave's image; "
 			"Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n",
-			(u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1,
-			(u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1,
-			CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE);
-	out_be32((void *)&srio->atmu
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwtar,
-			CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 >> 12);
-	out_be32((void *)&srio->atmu
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwbar,
-			CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 >> 12);
-	out_be32((void *)&srio->atmu
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwar,
+			(u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
+			(u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1,
+			CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
+	out_be32((void *)&srio->atmu.port[port - 1].inbw[0].riwtar,
+			CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS >> 12);
+	out_be32((void *)&srio->atmu.port[port - 1].inbw[0].riwbar,
+			CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 >> 12);
+	out_be32((void *)&srio->atmu.port[port - 1].inbw[0].riwar,
 			SRIO_IB_ATMU_AR
-			| atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE));
+			| atmu_size_mask(CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE));
 
 	/* configure inbound window for slave's u-boot image */
 	debug("SRIOBOOT - MASTER: Inbound window for slave's image; "
 			"Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n",
-			(u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2,
-			(u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2,
-			CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE);
-	out_be32((void *)&srio->atmu
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwtar,
-			CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 >> 12);
-	out_be32((void *)&srio->atmu
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwbar,
-			CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 >> 12);
-	out_be32((void *)&srio->atmu
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwar,
+			(u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
+			(u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2,
+			CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
+	out_be32((void *)&srio->atmu.port[port - 1].inbw[1].riwtar,
+			CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS >> 12);
+	out_be32((void *)&srio->atmu.port[port - 1].inbw[1].riwbar,
+			CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 >> 12);
+	out_be32((void *)&srio->atmu.port[port - 1].inbw[1].riwar,
 			SRIO_IB_ATMU_AR
-			| atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE));
+			| atmu_size_mask(CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE));
 
-	/* configure inbound window for slave's ucode */
-	debug("SRIOBOOT - MASTER: Inbound window for slave's ucode; "
+	/* configure inbound window for slave's ucode and ENV */
+	debug("SRIOBOOT - MASTER: Inbound window for slave's ucode and ENV; "
 			"Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n",
-			(u64)CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS,
-			(u64)CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS,
-			CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE);
-	out_be32((void *)&srio->atmu
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwtar,
-			CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS >> 12);
-	out_be32((void *)&srio->atmu
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwbar,
-			CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS >> 12);
-	out_be32((void *)&srio->atmu
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwar,
-			SRIO_IB_ATMU_AR
-			| atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE));
-
-	/* configure inbound window for slave's ENV */
-	debug("SRIOBOOT - MASTER: Inbound window for slave's ENV; "
-			"Local = 0x%llx, Siro = 0x%llx, Size = 0x%x\n",
-			CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS,
-			CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS,
-			CONFIG_SRIOBOOT_SLAVE_ENV_SIZE);
-	out_be32((void *)&srio->atmu
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwtar,
-			CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS >> 12);
-	out_be32((void *)&srio->atmu
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwbar,
-			CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS >> 12);
-	out_be32((void *)&srio->atmu
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwar,
+			(u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS,
+			(u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS,
+			CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE);
+	out_be32((void *)&srio->atmu.port[port - 1].inbw[2].riwtar,
+			CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS >> 12);
+	out_be32((void *)&srio->atmu.port[port - 1].inbw[2].riwbar,
+			CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS >> 12);
+	out_be32((void *)&srio->atmu.port[port - 1].inbw[2].riwar,
 			SRIO_IB_ATMU_AR
-			| atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_ENV_SIZE));
+			| atmu_size_mask(CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE));
 }
 
-#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
-void srio_boot_master_release_slave(void)
+void srio_boot_master_release_slave(int port)
 {
 	struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
 	u32 escsr;
 	debug("SRIOBOOT - MASTER: "
 			"Check the port status and release slave core ...\n");
 
-	escsr = in_be32((void *)&srio->lp_serial
-			.port[CONFIG_SRIOBOOT_MASTER_PORT].pescsr);
+	escsr = in_be32((void *)&srio->lp_serial.port[port - 1].pescsr);
 	if (escsr & 0x2) {
 		if (escsr & 0x10100) {
 			debug("SRIOBOOT - MASTER: Port [ %d ] is error.\n",
-					CONFIG_SRIOBOOT_MASTER_PORT);
+				port);
 		} else {
 			debug("SRIOBOOT - MASTER: "
-					"Port [ %d ] is ready, now release slave's core ...\n",
-					CONFIG_SRIOBOOT_MASTER_PORT);
+				"Port [ %d ] is ready, now release slave's core ...\n",
+				port);
 			/*
 			 * configure outbound window
 			 * with maintenance attribute to set slave's LCSBA1CSR
 			 */
-			out_be32((void *)&srio->atmu
-				.port[CONFIG_SRIOBOOT_MASTER_PORT]
+			out_be32((void *)&srio->atmu.port[port - 1]
 				.outbw[1].rowtar, 0);
-			out_be32((void *)&srio->atmu
-				.port[CONFIG_SRIOBOOT_MASTER_PORT]
+			out_be32((void *)&srio->atmu.port[port - 1]
 				.outbw[1].rowtear, 0);
-			if (CONFIG_SRIOBOOT_MASTER_PORT)
-				out_be32((void *)&srio->atmu
-					.port[CONFIG_SRIOBOOT_MASTER_PORT]
+			if (port - 1)
+				out_be32((void *)&srio->atmu.port[port - 1]
 					.outbw[1].rowbar,
 					CONFIG_SYS_SRIO2_MEM_PHYS >> 12);
 			else
-				out_be32((void *)&srio->atmu
-					.port[CONFIG_SRIOBOOT_MASTER_PORT]
+				out_be32((void *)&srio->atmu.port[port - 1]
 					.outbw[1].rowbar,
 					CONFIG_SYS_SRIO1_MEM_PHYS >> 12);
-			out_be32((void *)&srio->atmu
-					.port[CONFIG_SRIOBOOT_MASTER_PORT]
+			out_be32((void *)&srio->atmu.port[port - 1]
 					.outbw[1].rowar,
 					SRIO_OB_ATMU_AR_MAINT
 					| atmu_size_mask(SRIO_MAINT_WIN_SIZE));
@@ -223,27 +189,22 @@ void srio_boot_master_release_slave(void)
 			 * configure outbound window
 			 * with R/W attribute to set slave's BRR
 			 */
-			out_be32((void *)&srio->atmu
-				.port[CONFIG_SRIOBOOT_MASTER_PORT]
+			out_be32((void *)&srio->atmu.port[port - 1]
 				.outbw[2].rowtar,
 				SRIO_LCSBA1CSR >> 9);
-			out_be32((void *)&srio->atmu
-				.port[CONFIG_SRIOBOOT_MASTER_PORT]
+			out_be32((void *)&srio->atmu.port[port - 1]
 				.outbw[2].rowtear, 0);
-			if (CONFIG_SRIOBOOT_MASTER_PORT)
-				out_be32((void *)&srio->atmu
-					.port[CONFIG_SRIOBOOT_MASTER_PORT]
+			if (port - 1)
+				out_be32((void *)&srio->atmu.port[port - 1]
 					.outbw[2].rowbar,
 					(CONFIG_SYS_SRIO2_MEM_PHYS
 					+ SRIO_MAINT_WIN_SIZE) >> 12);
 			else
-				out_be32((void *)&srio->atmu
-					.port[CONFIG_SRIOBOOT_MASTER_PORT]
+				out_be32((void *)&srio->atmu.port[port - 1]
 					.outbw[2].rowbar,
 					(CONFIG_SYS_SRIO1_MEM_PHYS
 					+ SRIO_MAINT_WIN_SIZE) >> 12);
-			out_be32((void *)&srio->atmu
-				.port[CONFIG_SRIOBOOT_MASTER_PORT]
+			out_be32((void *)&srio->atmu.port[port - 1]
 				.outbw[2].rowar,
 				SRIO_OB_ATMU_AR_RW
 				| atmu_size_mask(SRIO_RW_WIN_SIZE));
@@ -252,7 +213,7 @@ void srio_boot_master_release_slave(void)
 			 * Set the LCSBA1CSR register in slave
 			 * by the maint-outbound window
 			 */
-			if (CONFIG_SRIOBOOT_MASTER_PORT) {
+			if (port - 1) {
 				out_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT
 					+ SRIO_LCSBA1CSR_OFFSET,
 					SRIO_LCSBA1CSR);
@@ -266,8 +227,8 @@ void srio_boot_master_release_slave(void)
 				 */
 				out_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT
 					+ SRIO_MAINT_WIN_SIZE
-					+ CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET,
-					CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK);
+					+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET,
+					CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK);
 			} else {
 				out_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT
 					+ SRIO_LCSBA1CSR_OFFSET,
@@ -282,15 +243,13 @@ void srio_boot_master_release_slave(void)
 				 */
 				out_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT
 					+ SRIO_MAINT_WIN_SIZE
-					+ CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET,
-					CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK);
+					+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET,
+					CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK);
 			}
 			debug("SRIOBOOT - MASTER: "
 					"Release slave successfully! Now the slave should start up!\n");
 		}
 	} else
-		debug("SRIOBOOT - MASTER: Port [ %d ] is not ready.\n",
-				CONFIG_SRIOBOOT_MASTER_PORT);
+		debug("SRIOBOOT - MASTER: Port [ %d ] is not ready.\n", port);
 }
 #endif
-#endif
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index d1386369395..67cea01aae8 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -29,6 +29,10 @@
 #include <asm/config_mpc86xx.h>
 #endif
 
+#ifndef HWCONFIG_BUFFER_SIZE
+  #define HWCONFIG_BUFFER_SIZE 256
+#endif
+
 /* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */
 #if defined(CONFIG_MPC8XXX_SPI) || defined(CONFIG_FSL_ESPI)
 # ifndef CONFIG_HARD_SPI
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index b6c44bb11d1..aa27741a921 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -37,6 +37,7 @@
 #if defined(CONFIG_MPC8536)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		12
+#define CONFIG_SYS_PPC_E500_DEBUG_TLB	1
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 
@@ -54,12 +55,14 @@
 #elif defined(CONFIG_MPC8544)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		10
+#define CONFIG_SYS_PPC_E500_DEBUG_TLB	0
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 
 #elif defined(CONFIG_MPC8548)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		10
+#define CONFIG_SYS_PPC_E500_DEBUG_TLB	0
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
@@ -113,6 +116,7 @@
 #elif defined(CONFIG_MPC8572)
 #define CONFIG_MAX_CPUS			2
 #define CONFIG_SYS_FSL_NUM_LAWS		12
+#define CONFIG_SYS_PPC_E500_DEBUG_TLB	2
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_DDR_115
@@ -191,33 +195,6 @@
 #define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
 #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 
-/* P1015 is single core version of P1024 */
-#elif defined(CONFIG_P1015)
-#define CONFIG_MAX_CPUS			1
-#define CONFIG_SYS_FSL_NUM_LAWS		12
-#define CONFIG_SYS_PPC_E500_DEBUG_TLB	2
-#define CONFIG_TSECV2
-#define CONFIG_FSL_PCIE_DISABLE_ASPM
-#define CONFIG_SYS_FSL_SEC_COMPAT	2
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
-#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
-/* P1016 is single core version of P1025 */
-#elif defined(CONFIG_P1016)
-#define CONFIG_MAX_CPUS			1
-#define CONFIG_SYS_FSL_NUM_LAWS		12
-#define CONFIG_SYS_PPC_E500_DEBUG_TLB	2
-#define CONFIG_TSECV2
-#define CONFIG_FSL_PCIE_DISABLE_ASPM
-#define CONFIG_SYS_FSL_SEC_COMPAT	2
-#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-#define QE_MURAM_SIZE			0x6000UL
-#define MAX_QE_RISC			1
-#define QE_NUM_OF_SNUM			28
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
-
 /* P1017 is single core version of P1023 */
 #elif defined(CONFIG_P1017)
 #define CONFIG_MAX_CPUS			1
@@ -333,30 +310,7 @@
 #define CONFIG_SYS_FSL_RMU
 #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM	2
 
-#elif defined(CONFIG_PPC_P2040)
-#define CONFIG_MAX_CPUS			4
-#define CONFIG_SYS_FSL_NUM_CC_PLLS	2
-#define CONFIG_SYS_FSL_NUM_LAWS		32
-#define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_SYS_NUM_FMAN		1
-#define CONFIG_SYS_NUM_FM1_DTSEC	5
-#define CONFIG_NUM_DDR_CONTROLLERS	1
-#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV	32
-#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.2"
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
-#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
-#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
-#define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
-#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
-#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-
-#elif defined(CONFIG_PPC_P2041)
+#elif defined(CONFIG_PPC_P2041) /* also supports P2040 */
 #define CONFIG_MAX_CPUS			4
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
@@ -380,6 +334,10 @@
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
+#define CONFIG_SYS_FSL_ERRATUM_A004510
+#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x10
+#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2	0x11
+#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
 
 #elif defined(CONFIG_PPC_P3041)
 #define CONFIG_MAX_CPUS			4
@@ -399,47 +357,18 @@
 #define CONFIG_SYS_FSL_USB2_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
+#define CONFIG_SYS_FSL_ERRATUM_A004510
+#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x10
+#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2	0x11
+#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
 
-#elif defined(CONFIG_PPC_P3060)
-#define CONFIG_MAX_CPUS			8
-#define CONFIG_SYS_FSL_NUM_CC_PLLS	4
-#define CONFIG_SYS_FSL_NUM_LAWS		32
-#define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_SYS_NUM_FMAN		2
-#define CONFIG_SYS_NUM_FM1_DTSEC	4
-#define CONFIG_SYS_NUM_FM2_DTSEC	4
-#define CONFIG_NUM_DDR_CONTROLLERS	1
-#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV	16
-#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.2"
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
-#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
-#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
-#define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
-#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
-#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-
-#elif defined(CONFIG_PPC_P4040)
-#define CONFIG_MAX_CPUS			4
-#define CONFIG_SYS_FSL_NUM_CC_PLLS	4
-#define CONFIG_SYS_FSL_NUM_LAWS		32
-#define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV	16
-#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,p4080-pcie"
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
-#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
-#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
-#define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
-#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
-#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-
-#elif defined(CONFIG_PPC_P4080)
+#elif defined(CONFIG_PPC_P4080) /* also supports P4040 */
 #define CONFIG_MAX_CPUS			8
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	4
 #define CONFIG_SYS_FSL_NUM_LAWS		32
@@ -474,32 +403,11 @@
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
 #define CONFIG_SYS_FSL_RMU
 #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM	2
+#define CONFIG_SYS_FSL_ERRATUM_A004510
+#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x20
+#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
 
-/* P5010 is single core version of P5020 */
-#elif defined(CONFIG_PPC_P5010)
-#define CONFIG_MAX_CPUS			1
-#define CONFIG_SYS_FSL_NUM_CC_PLLS	2
-#define CONFIG_SYS_FSL_NUM_LAWS		32
-#define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_NUM_FMAN		1
-#define CONFIG_SYS_NUM_FM1_DTSEC	5
-#define CONFIG_SYS_NUM_FM1_10GEC	1
-#define CONFIG_NUM_DDR_CONTROLLERS	1
-#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV	32
-#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.2"
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
-#define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
-#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
-#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-
-#elif defined(CONFIG_PPC_P5020)
+#elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
 #define CONFIG_MAX_CPUS			2
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
@@ -521,6 +429,9 @@
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
+#define CONFIG_SYS_FSL_ERRATUM_A004510
+#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x10
+#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000
 
 #elif defined(CONFIG_BSC9131)
 #define CONFIG_MAX_CPUS			1
diff --git a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h
index 982b8094625..ffe4db8b8aa 100644
--- a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h
+++ b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h
@@ -43,6 +43,7 @@ typedef struct dimm_params_s {
 	/* DIMM timing parameters */
 
 	unsigned int mtb_ps;	/* medium timebase ps, only for ddr3 */
+	unsigned int ftb_10th_ps; /* fine timebase, in 1/10 ps, only for ddr3 */
 	unsigned int tAA_ps;	/* minimum CAS latency time, only for ddr3 */
 	unsigned int tFAW_ps;	/* four active window delay, only for ddr3 */
 
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index 93639ba8516..e271342f089 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -76,6 +76,13 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
 #define FSL_DDR_PAGE_INTERLEAVING	0x1
 #define FSL_DDR_BANK_INTERLEAVING	0x2
 #define FSL_DDR_SUPERBANK_INTERLEAVING	0x3
+#define FSL_DDR_3WAY_1KB_INTERLEAVING	0xA
+#define FSL_DDR_3WAY_4KB_INTERLEAVING	0xC
+#define FSL_DDR_3WAY_8KB_INTERLEAVING	0xD
+/* placeholder for 4-way interleaving */
+#define FSL_DDR_4WAY_1KB_INTERLEAVING	0x1A
+#define FSL_DDR_4WAY_4KB_INTERLEAVING	0x1C
+#define FSL_DDR_4WAY_8KB_INTERLEAVING	0x1D
 
 /* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
  */
@@ -88,6 +95,7 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
 #define SDRAM_CFG_SDRAM_TYPE_MASK	0x07000000
 #define SDRAM_CFG_SDRAM_TYPE_SHIFT	24
 #define SDRAM_CFG_DYN_PWR		0x00200000
+#define SDRAM_CFG_DBW_MASK		0x00180000
 #define SDRAM_CFG_32_BE			0x00080000
 #define SDRAM_CFG_16_BE			0x00100000
 #define SDRAM_CFG_8_BE			0x00040000
diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h
index 7d95eb4416a..ba41b73cc03 100644
--- a/arch/powerpc/include/asm/fsl_ifc.h
+++ b/arch/powerpc/include/asm/fsl_ifc.h
@@ -783,12 +783,16 @@ extern void init_early_memctl_regs(void);
 
 #define IFC_BASE_ADDR ((struct fsl_ifc *)CONFIG_SYS_IFC_ADDR)
 
+#define get_ifc_cspr_ext(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext))
 #define get_ifc_cspr(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr))
+#define get_ifc_csor_ext(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext))
 #define get_ifc_csor(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor))
 #define get_ifc_amask(i) (in_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask))
 #define get_ifc_ftim(i, j) (in_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j]))
 
+#define set_ifc_cspr_ext(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr_ext, v))
 #define set_ifc_cspr(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v))
+#define set_ifc_csor_ext(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor_ext, v))
 #define set_ifc_csor(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v))
 #define set_ifc_amask(i, v) (out_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v))
 #define set_ifc_ftim(i, j, v) \
@@ -909,22 +913,24 @@ struct fsl_ifc_gpcm {
  */
 struct fsl_ifc {
 	u32 ifc_rev;
-	u32 res1[0x3];
+	u32 res1[0x2];
 	struct {
+		u32 cspr_ext;
 		u32 cspr;
-		u32 res2[0x2];
+		u32 res2;
 	} cspr_cs[FSL_IFC_BANK_COUNT];
-	u32 res3[0x18];
+	u32 res3[0x19];
 	struct {
 		u32 amask;
 		u32 res4[0x2];
 	} amask_cs[FSL_IFC_BANK_COUNT];
-	u32 res5[0x18];
+	u32 res5[0x17];
 	struct {
+		u32 csor_ext;
 		u32 csor;
-		u32 res6[0x2];
+		u32 res6;
 	} csor_cs[FSL_IFC_BANK_COUNT];
-	u32 res7[0x18];
+	u32 res7[0x19];
 	struct {
 		u32 ftim[4];
 		u32 res8[0x8];
diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h
index 13caffd96e2..f9cec8ea441 100644
--- a/arch/powerpc/include/asm/fsl_law.h
+++ b/arch/powerpc/include/asm/fsl_law.h
@@ -60,14 +60,19 @@ enum law_trgt_if {
 
 	LAW_TRGT_IF_DDR_1 = 0x10,
 	LAW_TRGT_IF_DDR_2 = 0x11,	/* 2nd controller */
+	LAW_TRGT_IF_DDR_3 = 0x12,
+	LAW_TRGT_IF_DDR_4 = 0x13,
 	LAW_TRGT_IF_DDR_INTRLV = 0x14,
-
+	LAW_TRGT_IF_DDR_INTLV_34 = 0x15,
+	LAW_TRGT_IF_DDR_INTLV_123 = 0x17,
+	LAW_TRGT_IF_DDR_INTLV_1234 = 0x16,
 	LAW_TRGT_IF_BMAN = 0x18,
 	LAW_TRGT_IF_DCSR = 0x1d,
 	LAW_TRGT_IF_LBC = 0x1f,
 	LAW_TRGT_IF_QMAN = 0x3c,
 };
 #define LAW_TRGT_IF_DDR		LAW_TRGT_IF_DDR_1
+#define LAW_TRGT_IF_IFC		LAW_TRGT_IF_LBC
 #else
 enum law_trgt_if {
 	LAW_TRGT_IF_PCI = 0x00,
@@ -86,6 +91,12 @@ enum law_trgt_if {
 	LAW_TRGT_IF_DPAA_SWP_SRAM = 0x0e,
 	LAW_TRGT_IF_DDR = 0x0f,
 	LAW_TRGT_IF_DDR_2 = 0x16,	/* 2nd controller */
+	/* place holder for 3-way and 4-way interleaving */
+	LAW_TRGT_IF_DDR_3,
+	LAW_TRGT_IF_DDR_4,
+	LAW_TRGT_IF_DDR_INTLV_34,
+	LAW_TRGT_IF_DDR_INTLV_123,
+	LAW_TRGT_IF_DDR_INTLV_1234,
 };
 #define LAW_TRGT_IF_DDR_1	LAW_TRGT_IF_DDR
 #define LAW_TRGT_IF_PCI_1	LAW_TRGT_IF_PCI
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index 0f31af1db32..22525f11561 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -41,6 +41,7 @@ enum srds_prtcl {
 	SGMII_FM2_DTSEC2,
 	SGMII_FM2_DTSEC3,
 	SGMII_FM2_DTSEC4,
+	SGMII_FM2_DTSEC5,
 	SGMII_TSEC1,
 	SGMII_TSEC2,
 	SGMII_TSEC3,
diff --git a/arch/powerpc/include/asm/fsl_srio.h b/arch/powerpc/include/asm/fsl_srio.h
index a905a266c4d..dfd8e08f3ed 100644
--- a/arch/powerpc/include/asm/fsl_srio.h
+++ b/arch/powerpc/include/asm/fsl_srio.h
@@ -55,10 +55,8 @@ enum atmu_size {
 #define atmu_size_bytes(x)	(1ULL << ((x & 0x3f) + 1))
 
 extern void srio_init(void);
-#ifdef CONFIG_SRIOBOOT_MASTER
-extern void srio_boot_master(void);
-#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF
-extern void srio_boot_master_release_slave(void);
-#endif
+#ifdef CONFIG_FSL_CORENET
+extern void srio_boot_master(int port);
+extern void srio_boot_master_release_slave(int port);
 #endif
 #endif
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 53d563ed0a0..7de33a7dded 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1729,6 +1729,7 @@ typedef struct ccsr_gur {
 #define FSL_CORENET_DEVDISR2_DTSEC2_2	0x00004000
 #define FSL_CORENET_DEVDISR2_DTSEC2_3	0x00002000
 #define FSL_CORENET_DEVDISR2_DTSEC2_4	0x00001000
+#define FSL_CORENET_DEVDISR2_DTSEC2_5	0x00000800
 #define FSL_CORENET_NUM_DEVDISR		2
 	u8	res7[8];
 	u32	powmgtcsr;	/* Power management status & control */
@@ -1758,13 +1759,14 @@ typedef struct ccsr_gur {
 #define FSL_CORENET_RCWSR5_DDR_SYNC		0x00000080
 #define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT		 7
 #define FSL_CORENET_RCWSR5_SRDS_EN		0x00002000
+#define FSL_CORENET_RCWSR6_BOOT_LOC	0x0f800000
 #define FSL_CORENET_RCWSRn_SRDS_LPD_B2		0x3c000000 /* bits 162..165 */
 #define FSL_CORENET_RCWSRn_SRDS_LPD_B3		0x003c0000 /* bits 170..173 */
 #define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT	0x00400000
 #define FSL_CORENET_RCWSR8_HOST_AGT_B1		0x00e00000
 #define FSL_CORENET_RCWSR8_HOST_AGT_B2		0x00100000
 #define FSL_CORENET_RCWSR11_EC1			0x00c00000 /* bits 360..361 */
-#if defined(CONFIG_PPC_P4080) || defined(CONFIG_PPC_P3060)
+#ifdef CONFIG_PPC_P4080
 #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1		0x00000000
 #define FSL_CORENET_RCWSR11_EC1_FM1_USB1		0x00800000
 #define FSL_CORENET_RCWSR11_EC2			0x001c0000 /* bits 363..365 */
@@ -1772,7 +1774,7 @@ typedef struct ccsr_gur {
 #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2		0x00080000
 #define FSL_CORENET_RCWSR11_EC2_USB2			0x00100000
 #endif
-#if defined(CONFIG_PPC_P2040) || defined(CONFIG_PPC_P2041) \
+#if defined(CONFIG_PPC_P2041) \
 	|| defined(CONFIG_PPC_P3041) || defined(CONFIG_PPC_P5020)
 #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_RGMII	0x00000000
 #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC4_MII		0x00800000
@@ -1836,7 +1838,13 @@ typedef struct ccsr_gur {
 	u8	res31[184];
 	u32	sriopstecr;	/* SRIO prescaler timer enable control */
 	u32	dcsrcr;		/* DCSR Control register */
-	u8	res32[1784];
+	u8	res31a[56];
+	u32	tp_ityp[64];	/* Topology Initiator Type Register */
+	struct {
+		u32	upper;
+		u32	lower;
+	} tp_cluster[16];	/* Core Cluster n Topology Register */
+	u8	res32[1344];
 	u32	pmuxcr;		/* Pin multiplexing control */
 	u8	res33[60];
 	u32	iovselsr;	/* I/O voltage selection status */
@@ -1849,6 +1857,18 @@ typedef struct ccsr_gur {
 	u8	res37[380];
 } ccsr_gur_t;
 
+#define TP_ITYP_AV	0x00000001		/* Initiator available */
+#define TP_ITYP_TYPE(x)	(((x) & 0x6) >> 1)	/* Initiator Type */
+#define TP_ITYP_TYPE_OTHER	0x0
+#define TP_ITYP_TYPE_PPC	0x1	/* PowerPC */
+#define TP_ITYP_TYPE_SC		0x2	/* StarCore DSP */
+#define TP_ITYP_TYPE_HA		0x3	/* HW Accelerator */
+#define TP_ITYP_THDS(x)	(((x) & 0x18) >> 3)	/* # threads */
+#define TP_ITYP_VER(x)	(((x) & 0xe0) >> 5)	/* Initiator Version */
+
+#define TP_CLUSTER_EOC		0x80000000	/* end of clusters */
+#define TP_CLUSTER_INIT_MASK	0x0000003f	/* initiator mask */
+
 #define FSL_CORENET_DCSR_SZ_MASK	0x00000003
 #define FSL_CORENET_DCSR_SZ_4M		0x0
 #define FSL_CORENET_DCSR_SZ_1G		0x3
@@ -1890,6 +1910,73 @@ typedef struct ccsr_clk {
 	u8	res15[0x3dc];
 } ccsr_clk_t;
 
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+typedef struct ccsr_rcpm {
+	u8	res_00[12];
+	u32	tph10sr0;	/* Thread PH10 Status Register */
+	u8	res_10[12];
+	u32	tph10setr0;	/* Thread PH10 Set Control Register */
+	u8	res_20[12];
+	u32	tph10clrr0;	/* Thread PH10 Clear Control Register */
+	u8	res_30[12];
+	u32	tph10psr0;	/* Thread PH10 Previous Status Register */
+	u8	res_40[12];
+	u32	twaitsr0;	/* Thread Wait Status Register */
+	u8	res_50[96];
+	u32	pcph15sr;	/* Physical Core PH15 Status Register */
+	u32	pcph15setr;	/* Physical Core PH15 Set Control Register */
+	u32	pcph15clrr;	/* Physical Core PH15 Clear Control Register */
+	u32	pcph15psr;	/* Physical Core PH15 Prev Status Register */
+	u8	res_c0[16];
+	u32	pcph20sr;	/* Physical Core PH20 Status Register */
+	u32	pcph20setr;	/* Physical Core PH20 Set Control Register */
+	u32	pcph20clrr;	/* Physical Core PH20 Clear Control Register */
+	u32	pcph20psr;	/* Physical Core PH20 Prev Status Register */
+	u32	pcpw20sr;	/* Physical Core PW20 Status Register */
+	u8	res_e0[12];
+	u32	pcph30sr;	/* Physical Core PH30 Status Register */
+	u32	pcph30setr;	/* Physical Core PH30 Set Control Register */
+	u32	pcph30clrr;	/* Physical Core PH30 Clear Control Register */
+	u32	pcph30psr;	/* Physical Core PH30 Prev Status Register */
+	u8	res_100[32];
+	u32	ippwrgatecr;	/* IP Power Gating Control Register */
+	u8	res_124[12];
+	u32	powmgtcsr;	/* Power Management Control & Status Reg */
+	u8	res_134[12];
+	u32	ippdexpcr[4];	/* IP Powerdown Exception Control Reg */
+	u8	res_150[12];
+	u32	tpmimr0;	/* Thread PM Interrupt Mask Reg */
+	u8	res_160[12];
+	u32	tpmcimr0;	/* Thread PM Crit Interrupt Mask Reg */
+	u8	res_170[12];
+	u32	tpmmcmr0;	/* Thread PM Machine Check Interrupt Mask Reg */
+	u8	res_180[12];
+	u32	tpmnmimr0;	/* Thread PM NMI Mask Reg */
+	u8	res_190[12];
+	u32	tmcpmaskcr0;	/* Thread Machine Check Mask Control Reg */
+	u32	pctbenr;	/* Physical Core Time Base Enable Reg */
+	u32	pctbclkselr;	/* Physical Core Time Base Clock Select */
+	u32	tbclkdivr;	/* Time Base Clock Divider Register */
+	u8	res_1ac[4];
+	u32	ttbhltcr[4];	/* Thread Time Base Halt Control Register */
+	u32	clpcl10sr;	/* Cluster PCL10 Status Register */
+	u32	clpcl10setr;	/* Cluster PCL30 Set Control Register */
+	u32	clpcl10clrr;	/* Cluster PCL30 Clear Control Register */
+	u32	clpcl10psr;	/* Cluster PCL30 Prev Status Register */
+	u32	cddslpsetr;	/* Core Domain Deep Sleep Set Register */
+	u32	cddslpclrr;	/* Core Domain Deep Sleep Clear Register */
+	u32	cdpwroksetr;	/* Core Domain Power OK Set Register */
+	u32	cdpwrokclrr;	/* Core Domain Power OK Clear Register */
+	u32	cdpwrensr;	/* Core Domain Power Enable Status Register */
+	u32	cddslsr;	/* Core Domain Deep Sleep Status Register */
+	u8	res_1e8[8];
+	u32	dslpcntcr[8];	/* Deep Sleep Counter Cfg Register */
+	u8	res_300[3568];
+} ccsr_rcpm_t;
+
+#define ctbenrl pctbenr
+
+#else
 typedef struct ccsr_rcpm {
 	u8	res1[4];
 	u32	cdozsrl;	/* Core Doze Status */
@@ -1926,6 +2013,7 @@ typedef struct ccsr_rcpm {
 	u32	ctbhltcrl;	/* Core Time Base Halt Control */
 	u8	res18[0xf68];
 } ccsr_rcpm_t;
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 
 #else
 typedef struct ccsr_gur {
@@ -2259,8 +2347,7 @@ typedef struct ccsr_gur {
 	u8	res11a[76];
 	par_io_t qe_par_io[7];
 	u8	res11b[1600];
-#elif defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-      defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#elif defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 	u8      res11a[12];
 	u32     iovselsr;
 	u8      res11b[60];
@@ -2534,6 +2621,7 @@ struct ccsr_rman {
 #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET	0x0000
 #define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x8000
 #define CONFIG_SYS_MPC85xx_DDR2_OFFSET		0x9000
+#define CONFIG_SYS_MPC85xx_DDR3_OFFSET		0xA000
 #define CONFIG_SYS_FSL_CORENET_CLK_OFFSET	0xE1000
 #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET	0xE2000
 #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET	0xEA000
@@ -2544,6 +2632,7 @@ struct ccsr_rman {
 #define CONFIG_SYS_MPC85xx_ESPI_OFFSET		0x110000
 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET		0x114000
 #define CONFIG_SYS_MPC85xx_LBC_OFFSET		0x124000
+#define CONFIG_SYS_MPC85xx_IFC_OFFSET		0x124000
 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET		0x130000
 #define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET	0x1e0000
 #define CONFIG_SYS_MPC85xx_PCIE1_OFFSET		0x200000
@@ -2652,6 +2741,8 @@ struct ccsr_rman {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
 #define CONFIG_SYS_MPC85xx_DDR2_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC85xx_DDR3_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR3_OFFSET)
 #define CONFIG_SYS_LBC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
 #define CONFIG_SYS_IFC_ADDR \
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index ec0bfaee991..9e208618d94 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -162,7 +162,7 @@ static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
  * is actually performed (i.e. the data has come back) before we start
  * executing any following instructions.
  */
-static inline u8 in_8(const volatile unsigned char __iomem *addr)
+extern inline u8 in_8(const volatile unsigned char __iomem *addr)
 {
 	u8 ret;
 
@@ -173,7 +173,7 @@ static inline u8 in_8(const volatile unsigned char __iomem *addr)
 	return ret;
 }
 
-static inline void out_8(volatile unsigned char __iomem *addr, u8 val)
+extern inline void out_8(volatile unsigned char __iomem *addr, u8 val)
 {
 	__asm__ __volatile__("sync;\n"
 			     "stb%U0%X0 %1,%0;\n"
@@ -181,7 +181,7 @@ static inline void out_8(volatile unsigned char __iomem *addr, u8 val)
 			     : "r" (val));
 }
 
-static inline u16 in_le16(const volatile unsigned short __iomem *addr)
+extern inline u16 in_le16(const volatile unsigned short __iomem *addr)
 {
 	u16 ret;
 
@@ -192,7 +192,7 @@ static inline u16 in_le16(const volatile unsigned short __iomem *addr)
 	return ret;
 }
 
-static inline u16 in_be16(const volatile unsigned short __iomem *addr)
+extern inline u16 in_be16(const volatile unsigned short __iomem *addr)
 {
 	u16 ret;
 
@@ -202,18 +202,18 @@ static inline u16 in_be16(const volatile unsigned short __iomem *addr)
 	return ret;
 }
 
-static inline void out_le16(volatile unsigned short __iomem *addr, u16 val)
+extern inline void out_le16(volatile unsigned short __iomem *addr, u16 val)
 {
 	__asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) :
 			      "r" (val), "r" (addr));
 }
 
-static inline void out_be16(volatile unsigned short __iomem *addr, u16 val)
+extern inline void out_be16(volatile unsigned short __iomem *addr, u16 val)
 {
 	__asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
 }
 
-static inline u32 in_le32(const volatile unsigned __iomem *addr)
+extern inline u32 in_le32(const volatile unsigned __iomem *addr)
 {
 	u32 ret;
 
@@ -224,7 +224,7 @@ static inline u32 in_le32(const volatile unsigned __iomem *addr)
 	return ret;
 }
 
-static inline u32 in_be32(const volatile unsigned __iomem *addr)
+extern inline u32 in_be32(const volatile unsigned __iomem *addr)
 {
 	u32 ret;
 
@@ -234,13 +234,13 @@ static inline u32 in_be32(const volatile unsigned __iomem *addr)
 	return ret;
 }
 
-static inline void out_le32(volatile unsigned __iomem *addr, u32 val)
+extern inline void out_le32(volatile unsigned __iomem *addr, u32 val)
 {
 	__asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) :
 			     "r" (val), "r" (addr));
 }
 
-static inline void out_be32(volatile unsigned __iomem *addr, u32 val)
+extern inline void out_be32(volatile unsigned __iomem *addr, u32 val)
 {
 	__asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
 }
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 209103e3ce1..2e0e292da05 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -475,6 +475,10 @@ extern void print_bats(void);
 #define BOOKE_PAGESZ_256GB	14
 #define BOOKE_PAGESZ_1TB	15
 
+#define TLBIVAX_ALL		4
+#define TLBIVAX_TLB0		0
+#define TLBIVAX_TLB1		8
+
 #ifdef CONFIG_E500
 #ifndef __ASSEMBLY__
 extern void set_tlb(u8 tlb, u32 epn, u64 rpn,
diff --git a/arch/powerpc/include/asm/mp.h b/arch/powerpc/include/asm/mp.h
index 3ffa30b9789..fe490bac05a 100644
--- a/arch/powerpc/include/asm/mp.h
+++ b/arch/powerpc/include/asm/mp.h
@@ -28,4 +28,10 @@ void cpu_mp_lmb_reserve(struct lmb *lmb);
 u32 determine_mp_bootpg(void);
 int is_core_disabled(int nr);
 
+#ifdef CONFIG_E6500
+#define thread_to_core(x) (x >> 1)
+#else
+#define thread_to_core(x) (x)
+#endif
+
 #endif
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index dc009d66046..36695e2fb6d 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -486,11 +486,13 @@
 #define SPRN_L2CFG0	0x207	/* L2 Cache Configuration Register 0 */
 #define SPRN_L1CSR0	0x3f2	/* L1 Data Cache Control and Status Register 0 */
 #define   L1CSR0_CPE		0x00010000	/* Data Cache Parity Enable */
+#define   L1CSR0_CUL		0x00000400	/* (D-)Cache Unable to Lock */
 #define   L1CSR0_DCLFR		0x00000100	/* D-Cache Lock Flash Reset */
 #define   L1CSR0_DCFI		0x00000002	/* Data Cache Flash Invalidate */
 #define   L1CSR0_DCE		0x00000001	/* Data Cache Enable */
 #define SPRN_L1CSR1	0x3f3	/* L1 Instruction Cache Control and Status Register 1 */
 #define   L1CSR1_CPE		0x00010000	/* Instruction Cache Parity Enable */
+#define   L1CSR1_ICUL		0x00000400	/* I-Cache Unable to Lock */
 #define   L1CSR1_ICLFR		0x00000100	/* I-Cache Lock Flash Reset */
 #define   L1CSR1_ICFI		0x00000002	/* Instruction Cache Flash Invalidate */
 #define   L1CSR1_ICE		0x00000001	/* Instruction Cache Enable */
@@ -513,6 +515,7 @@
 
 #define SPRN_TLB0CFG	0x2B0	/* TLB 0 Config Register */
 #define SPRN_TLB1CFG	0x2B1	/* TLB 1 Config Register */
+#define   TLBnCFG_NENTRY_MASK	0x00000fff
 #define SPRN_TLB0PS	0x158	/* TLB 0 Page Size Register */
 #define SPRN_TLB1PS	0x159	/* TLB 1 Page Size Register */
 #define SPRN_MMUCSR0	0x3f4	/* MMU control and status register 0 */
@@ -948,6 +951,7 @@
 #define PVR_VER_E500_V2	0x8021
 #define PVR_VER_E500MC	0x8023
 #define PVR_VER_E5500	0x8024
+#define PVR_VER_E6500	0x8040
 
 #define PVR_86xx	0x80040000
 
@@ -1075,8 +1079,6 @@
 #define SVR_P1012	0x80E501
 #define SVR_P1013	0x80E700
 #define SVR_P1014	0x80F101
-#define SVR_P1015	0x80E502
-#define SVR_P1016	0x80E503
 #define SVR_P1017	0x80F700
 #define SVR_P1020	0x80E400
 #define SVR_P1021	0x80E401
@@ -1089,7 +1091,6 @@
 #define SVR_P2040	0x821000
 #define SVR_P2041	0x821001
 #define SVR_P3041	0x821103
-#define SVR_P3060	0x820002
 #define SVR_P4040	0x820100
 #define SVR_P4080	0x820000
 #define SVR_P5010	0x822100
@@ -1158,6 +1159,7 @@ struct cpu_type {
 };
 
 struct cpu_type *identify_cpu(u32 ver);
+int fixup_cpu(void);
 
 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
 #define CPU_TYPE_ENTRY(n, v, nc) \
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index fea310eedd1..07feaf55fc2 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -345,6 +345,13 @@ ulong get_effective_memsize(void)
 #endif
 }
 
+int __fixup_cpu(void)
+{
+	return 0;
+}
+
+int fixup_cpu(void) __attribute__((weak, alias("__fixup_cpu")));
+
 /*
  * This is the first part of the initialization sequence that is
  * implemented in C, but still running from ROM.
@@ -521,9 +528,8 @@ void board_init_f(ulong bootflag)
 	addr_sp -= 16;
 	addr_sp &= ~0xF;
 	s = (ulong *) addr_sp;
-	*s-- = 0;
-	*s-- = 0;
-	addr_sp = (ulong) s;
+	*s = 0; /* Terminate back chain */
+	*++s = 0; /* NULL return address */
 	debug("Stack Pointer at: %08lx\n", addr_sp);
 
 	/*
@@ -647,6 +653,12 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	 * We need to update it to point to the same CPU entry in RAM.
 	 */
 	gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
+
+	/*
+	 * If we didn't know the cpu mask & # cores, we can save them of
+	 * now rather than 'computing' them constantly
+	 */
+	fixup_cpu();
 #endif
 
 #ifdef CONFIG_SYS_EXTRA_ENV_RELOC
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 0b40dc7bf72..54cb098a915 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -51,14 +51,12 @@ COBJS-$(CONFIG_MPC8572DS)	+= ics307_clk.o
 COBJS-$(CONFIG_P1022DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P2020DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P3041DS)		+= ics307_clk.o
-COBJS-$(CONFIG_P3060QDS)       	+= ics307_clk.o
 COBJS-$(CONFIG_P4080DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P5020DS)		+= ics307_clk.o
 
 # deal with common files for P-series corenet based devices
 SUBLIB-$(CONFIG_P2041RDB)	+= p_corenet/libp_corenet.o
 SUBLIB-$(CONFIG_P3041DS)	+= p_corenet/libp_corenet.o
-SUBLIB-$(CONFIG_P3060QDS)	+= p_corenet/libp_corenet.o
 SUBLIB-$(CONFIG_P4080DS)	+= p_corenet/libp_corenet.o
 SUBLIB-$(CONFIG_P5020DS)	+= p_corenet/libp_corenet.o
 
diff --git a/board/freescale/common/fman.c b/board/freescale/common/fman.c
index 6ddf8162012..3ef49369a47 100644
--- a/board/freescale/common/fman.c
+++ b/board/freescale/common/fman.c
@@ -25,6 +25,9 @@
 #include <libfdt_env.h>
 #include <fdt_support.h>
 
+#include <fm_eth.h>
+#include <asm/fsl_serdes.h>
+
 /*
  * Given the following ...
  *
@@ -67,3 +70,31 @@ int fdt_set_phy_handle(void *fdt, char *compat, phys_addr_t addr,
 
 	return fdt_setprop(fdt, offset, "phy-handle", &ph, sizeof(ph));
 }
+
+/*
+ * Return the SerDes device enum for a given Fman port
+ *
+ * This function just maps the fm_port namespace to the srds_prtcl namespace.
+ */
+enum srds_prtcl serdes_device_from_fm_port(enum fm_port port)
+{
+	static const enum srds_prtcl srds_table[] = {
+		[FM1_DTSEC1] = SGMII_FM1_DTSEC1,
+		[FM1_DTSEC2] = SGMII_FM1_DTSEC2,
+		[FM1_DTSEC3] = SGMII_FM1_DTSEC3,
+		[FM1_DTSEC4] = SGMII_FM1_DTSEC4,
+		[FM1_DTSEC5] = SGMII_FM1_DTSEC5,
+		[FM1_10GEC1] = XAUI_FM1,
+		[FM2_DTSEC1] = SGMII_FM2_DTSEC1,
+		[FM2_DTSEC2] = SGMII_FM2_DTSEC2,
+		[FM2_DTSEC3] = SGMII_FM2_DTSEC3,
+		[FM2_DTSEC4] = SGMII_FM2_DTSEC4,
+		[FM2_DTSEC5] = SGMII_FM2_DTSEC5,
+		[FM2_10GEC1] = XAUI_FM2,
+	};
+
+	if ((port < FM1_DTSEC1) || (port > FM2_10GEC1))
+		return NONE;
+	else
+		return srds_table[port];
+}
diff --git a/board/freescale/common/fman.h b/board/freescale/common/fman.h
index d39ef080c1f..734b1da1d67 100644
--- a/board/freescale/common/fman.h
+++ b/board/freescale/common/fman.h
@@ -23,4 +23,6 @@
 int fdt_set_phy_handle(void *fdt, char *compat, phys_addr_t addr,
 			const char *alias);
 
+enum srds_prtcl serdes_device_from_fm_port(enum fm_port port);
+
 #endif
diff --git a/board/freescale/common/p_corenet/law.c b/board/freescale/common/p_corenet/law.c
index c4566ddd4f7..09ef5615d26 100644
--- a/board/freescale/common/p_corenet/law.c
+++ b/board/freescale/common/p_corenet/law.c
@@ -48,19 +48,6 @@ struct law_entry law_table[] = {
 #ifdef CONFIG_SYS_NAND_BASE_PHYS
 	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 #endif
-#ifdef CONFIG_SRIOBOOT_SLAVE
-#if defined(CONFIG_SRIOBOOT_SLAVE_PORT0)
-	SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
-				LAW_SIZE_1M, LAW_TRGT_IF_RIO_1),
-	SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
-				LAW_SIZE_1M, LAW_TRGT_IF_RIO_1),
-#elif defined(CONFIG_SRIOBOOT_SLAVE_PORT1)
-	SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
-				LAW_SIZE_1M, LAW_TRGT_IF_RIO_2),
-	SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
-				LAW_SIZE_1M, LAW_TRGT_IF_RIO_2),
-#endif
-#endif
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/common/p_corenet/tlb.c b/board/freescale/common/p_corenet/tlb.c
index da2162728fd..e5cf208a905 100644
--- a/board/freescale/common/p_corenet/tlb.c
+++ b/board/freescale/common/p_corenet/tlb.c
@@ -66,13 +66,13 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 0, BOOKE_PAGESZ_1M, 1),
-#elif defined(CONFIG_SRIOBOOT_SLAVE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 	/*
-	 * SRIOBOOT-SLAVE. When slave boot, the address of the
+	 * SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the
 	 * space is at 0xfff00000, it covered the 0xfffff000.
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_SRIOBOOT_SLAVE_ADDR,
-			CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR,
+			CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
 			0, 0, BOOKE_PAGESZ_1M, 1),
 #else
@@ -147,13 +147,13 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 16, BOOKE_PAGESZ_1M, 1),
 #endif
-#ifdef CONFIG_SRIOBOOT_SLAVE
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 	/*
-	 * SRIOBOOT-SLAVE. 1M space from 0xffe00000 for fetching ucode
-	 * and ENV from master
+	 * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for
+	 * fetching ucode and ENV from master
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR,
-		CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR,
+		CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
 		0, 17, BOOKE_PAGESZ_1M, 1),
 #endif
diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c
index b87b0922acf..2c69c516dd2 100644
--- a/board/freescale/corenet_ds/eth_p4080.c
+++ b/board/freescale/corenet_ds/eth_p4080.c
@@ -68,6 +68,15 @@ static char *mdio_names[16] = {
 	NULL, NULL, NULL,
 };
 
+/*
+ * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means
+ * that the mapping must be determined dynamically, or that the lane maps to
+ * something other than a board slot.
+ */
+static u8 lane_to_slot[] = {
+	1, 1, 2, 2, 3, 3, 3, 3, 6, 6, 4, 4, 4, 4, 5, 5, 5, 5
+};
+
 static char *p4080ds_mdio_name_for_muxval(u32 muxval)
 {
 	return mdio_names[(muxval & EMI_MASK) >> 28];
@@ -290,15 +299,6 @@ void fdt_fixup_board_enet(void *fdt)
 	}
 }
 
-enum board_slots {
-	SLOT1 = 1,
-	SLOT2,
-	SLOT3,
-	SLOT4,
-	SLOT5,
-	SLOT6,
-};
-
 int board_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_FMAN_ENET
@@ -307,27 +307,6 @@ int board_eth_init(bd_t *bis)
 	struct fsl_pq_mdio_info dtsec_mdio_info;
 	struct tgec_mdio_info tgec_mdio_info;
 
-	u8 lane_to_slot[] = {
-		SLOT1, /* 0 - Bank 1:A */
-		SLOT1, /* 1 - Bank 1:B */
-		SLOT2, /* 2 - Bank 1:C */
-		SLOT2, /* 3 - Bank 1:D */
-		SLOT3, /* 4 - Bank 1:E */
-		SLOT3, /* 5 - Bank 1:F */
-		SLOT3, /* 6 - Bank 1:G */
-		SLOT3, /* 7 - Bank 1:H */
-		SLOT6, /* 8 - Bank 1:I */
-		SLOT6, /* 9 - Bank 1:J */
-		SLOT4, /* 10 - Bank 2:A */
-		SLOT4, /* 11 - Bank 2:B */
-		SLOT4, /* 12 - Bank 2:C */
-		SLOT4, /* 13 - Bank 2:D */
-		SLOT5, /* 14 - Bank 3:A */
-		SLOT5, /* 15 - Bank 3:B */
-		SLOT5, /* 16 - Bank 3:C */
-		SLOT5, /* 17 - Bank 3:D */
-	};
-
 	/* Initialize the mdio_mux array so we can recognize empty elements */
 	for (i = 0; i < NUM_FM_PORTS; i++)
 		mdio_mux[i] = EMI_NONE;
@@ -380,17 +359,17 @@ int board_eth_init(bd_t *bis)
 				break;
 			slot = lane_to_slot[lane];
 			switch (slot) {
-			case SLOT3:
+			case 3:
 				mdio_mux[i] = EMI1_SLOT3;
 				fm_info_set_mdio(i,
 					mii_dev_for_muxval(mdio_mux[i]));
 				break;
-			case SLOT4:
+			case 4:
 				mdio_mux[i] = EMI1_SLOT4;
 				fm_info_set_mdio(i,
 					mii_dev_for_muxval(mdio_mux[i]));
 				break;
-			case SLOT5:
+			case 5:
 				mdio_mux[i] = EMI1_SLOT5;
 				fm_info_set_mdio(i,
 					mii_dev_for_muxval(mdio_mux[i]));
@@ -417,12 +396,12 @@ int board_eth_init(bd_t *bis)
 				break;
 			slot = lane_to_slot[lane];
 			switch (slot) {
-			case SLOT4:
+			case 4:
 				mdio_mux[i] = EMI2_SLOT4;
 				fm_info_set_mdio(i,
 					mii_dev_for_muxval(mdio_mux[i]));
 				break;
-			case SLOT5:
+			case 5:
 				mdio_mux[i] = EMI2_SLOT5;
 				fm_info_set_mdio(i,
 					mii_dev_for_muxval(mdio_mux[i]));
@@ -444,17 +423,17 @@ int board_eth_init(bd_t *bis)
 				break;
 			slot = lane_to_slot[lane];
 			switch (slot) {
-			case SLOT3:
+			case 3:
 				mdio_mux[i] = EMI1_SLOT3;
 				fm_info_set_mdio(i,
 					mii_dev_for_muxval(mdio_mux[i]));
 				break;
-			case SLOT4:
+			case 4:
 				mdio_mux[i] = EMI1_SLOT4;
 				fm_info_set_mdio(i,
 					mii_dev_for_muxval(mdio_mux[i]));
 				break;
-			case SLOT5:
+			case 5:
 				mdio_mux[i] = EMI1_SLOT5;
 				fm_info_set_mdio(i,
 					mii_dev_for_muxval(mdio_mux[i]));
@@ -481,12 +460,12 @@ int board_eth_init(bd_t *bis)
 				break;
 			slot = lane_to_slot[lane];
 			switch (slot) {
-			case SLOT4:
+			case 4:
 				mdio_mux[i] = EMI2_SLOT4;
 				fm_info_set_mdio(i,
 					mii_dev_for_muxval(mdio_mux[i]));
 				break;
-			case SLOT5:
+			case 5:
 				mdio_mux[i] = EMI2_SLOT5;
 				fm_info_set_mdio(i,
 					mii_dev_for_muxval(mdio_mux[i]));
diff --git a/board/freescale/corenet_ds/pbi.cfg b/board/freescale/corenet_ds/pbi.cfg
new file mode 100644
index 00000000000..50806ca8a00
--- /dev/null
+++ b/board/freescale/corenet_ds/pbi.cfg
@@ -0,0 +1,51 @@
+#
+# Copyright 2012 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.pblimage for more details about how-to configure
+# and create PBL boot image
+#
+
+#PBI commands
+#Initialize CPC1 as 1MB SRAM
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+09010100 00000000
+09010104 fff0000b
+09010f00 08000000
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff00000
+09000d08 81000013
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Initialize eSPI controller, default configuration is slow for eSPI to
+#load data, this configuration comes from u-boot eSPI driver.
+09110000 80000403
+09110020 2d170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/board/freescale/corenet_ds/rcw_p3041ds.cfg b/board/freescale/corenet_ds/rcw_p3041ds.cfg
new file mode 100644
index 00000000000..8813156219f
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p3041ds.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P3041DS.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+12600000 00000000 241C0000 00000000
+D8984A01 03002000 58000000 41000000
+00000000 00000000 00000000 10070000
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/corenet_ds/rcw_p4080ds.cfg b/board/freescale/corenet_ds/rcw_p4080ds.cfg
new file mode 100644
index 00000000000..6a263395998
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p4080ds.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P4080DS.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+105a0000 00000000 1e1e181e 0000cccc
+58400000 3c3c2000 58000000 e1000000
+00000000 00000000 00000000 008b6000
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/corenet_ds/rcw_p5020ds.cfg b/board/freescale/corenet_ds/rcw_p5020ds.cfg
new file mode 100644
index 00000000000..b09e409bbff
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p5020ds.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P5020DS.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+0C540000 00000000 1E120000 00000000
+D8984A01 03002000 58000000 41000000
+00000000 00000000 00000000 10070000
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index c75585e28c0..a275d3a074d 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -87,10 +87,10 @@ local_bus_init(void)
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
-		lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000;	/* DLL Bypass */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */
 
 	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
 
 	} else {
 		/*
@@ -105,7 +105,7 @@ local_bus_init(void)
 			lbc->lcrr = 0x10000004;
 		}
 
-		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
 		udelay(200);
 
 		/*
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 532d32ac7cb..13ca84b6523 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -269,13 +269,13 @@ local_bus_init(void)
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
-		lbc->lcrr |= 0x80000000;	/* DLL Bypass */
+		lbc->lcrr |= LCRR_DBYP;	/* DLL Bypass */
 
 	} else if (lbc_hz >= 133) {
-		lbc->lcrr &= (~0x80000000);		/* DLL Enabled */
+		lbc->lcrr &= (~LCRR_DBYP);		/* DLL Enabled */
 
 	} else {
-		lbc->lcrr &= (~0x80000000);	/* DLL Enabled */
+		lbc->lcrr &= (~LCRR_DBYP);	/* DLL Enabled */
 		udelay(200);
 
 		/*
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index 3361614de5f..4cfd61cdd95 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -267,13 +267,13 @@ local_bus_init(void)
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
-		lbc->lcrr |= 0x80000000;	/* DLL Bypass */
+		lbc->lcrr |= LCRR_DBYP;	/* DLL Bypass */
 
 	} else if (lbc_hz >= 133) {
-		lbc->lcrr &= (~0x80000000);		/* DLL Enabled */
+		lbc->lcrr &= (~LCRR_DBYP);		/* DLL Enabled */
 
 	} else {
-		lbc->lcrr &= (~0x80000000);	/* DLL Enabled */
+		lbc->lcrr &= (~LCRR_DBYP);	/* DLL Enabled */
 		udelay(200);
 
 		/*
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 1a165bff869..285edbce6b4 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -292,10 +292,10 @@ local_bus_init(void)
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
-		lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000;	/* DLL Bypass */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */
 
 	} else if (lbc_hz >= 133) {
-		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */
 
 	} else {
 		/*
@@ -310,7 +310,7 @@ local_bus_init(void)
 			lbc->lcrr = 0x10000004;
 		}
 
-		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000);/* DLL Enabled */
+		lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP);/* DLL Enabled */
 		udelay(200);
 
 		/*
diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c
index 10c5a42d1ea..6d00caffa37 100644
--- a/board/freescale/p1010rdb/ddr.c
+++ b/board/freescale/p1010rdb/ddr.c
@@ -147,10 +147,11 @@ phys_size_t fixed_sdram(void)
 	cpu = gd->cpu;
 	/* P1014 and it's derivatives support max 16bit DDR width */
 	if (cpu->soc_ver == SVR_P1014) {
+		ddr_cfg_regs.ddr_sdram_cfg &= ~SDRAM_CFG_DBW_MASK;
 		ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_16_BE;
-		ddr_cfg_regs.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS >> 1;
-		ddr_cfg_regs.ddr_sdram_cfg &= ~0x00180000;
-		ddr_cfg_regs.ddr_sdram_cfg |= 0x001080000;
+		/* divide SA and EA by two and then mask the rest so we don't
+		 * write to reserved fields */
+		ddr_cfg_regs.cs[0].bnds = (CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff;
 	}
 
 	ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
diff --git a/board/freescale/p1_p2_rdb_pc/law.c b/board/freescale/p1_p2_rdb_pc/law.c
index 79689199c12..0da8300c6f5 100644
--- a/board/freescale/p1_p2_rdb_pc/law.c
+++ b/board/freescale/p1_p2_rdb_pc/law.c
@@ -25,13 +25,11 @@
 #include <asm/mmu.h>
 
 struct law_entry law_table[] = {
-#ifndef CONFIG_NAND_SPL
 	SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_PMC_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC),
 #ifdef CONFIG_VSC7385_ENET
 	SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 #endif
-#endif
 	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC),
 #ifdef CONFIG_SYS_NAND_BASE_PHYS
 	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
diff --git a/board/freescale/p3060qds/Makefile b/board/freescale/p3060qds/Makefile
deleted file mode 100644
index ae136f4626d..00000000000
--- a/board/freescale/p3060qds/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# Copyright 2011 Freescale Semiconductor, Inc.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS-y += $(BOARD).o
-COBJS-y += ddr.o
-COBJS-y += eth.o
-COBJS-y += fixed_ddr.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS-y))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/freescale/p3060qds/README b/board/freescale/p3060qds/README
deleted file mode 100644
index ec627980c11..00000000000
--- a/board/freescale/p3060qds/README
+++ /dev/null
@@ -1,110 +0,0 @@
-Overview
-=========
-The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC.
-
-The P3060 Processor combines six e500mc Power Architecture processor
-cores(1.2GHz) with high-performance datapath acceleration
-architecture(DPAA), CoreNet fabric infrastructure, as well as network
-and peripheral bus interfaces required for networking, telecom/datacom,
-wireless infrastructure, and military/aerospace applications.
-
-
-P3060QDS Board Specifications:
-==============================
-Memory subsystem:
- * 2G Bytes UDIMM DDR3(64bit bus) with ECC on
- * 128M Bytes NOR flash single-chip memory
- * 16M Bytes SPI flash
- * 8K Bytes AT24C64 I2C EEPROM for RCW
-
-Ethernet(Default SERDES 0x19):
- * FM1-dTSEC1: connected to RGMII PHY1 (Vitesse VSC8641 on board,Bottom of dual RJ45)
- * FM1-dTSEC2: connected to RGMII PHY2 (Vitesse VSC8641 on board,Top of dual RJ45)
- * FM1-dTSEC3: connected to SGMII PHY  (Vitesse VSC8234 port1 in slot1)
- * FM1-dTSEC4: connected to SGMII PHY  (Vitesse VSC8234 port3 in slot1)
- * FM2-dTSEC1: connected to SGMII PHY  (Vitesse VSC8234 port0 in slot2)
- * FM2-dTSEC2: connected to SGMII PHY  (Vitesse VSC8234 port2 in slot2)
- * FM2-dTSEC3: connected to SGMII PHY  (Vitesse VSC8234 port0 in slot1)
- * FM2-dTSEC4: connected to SGMII PHY  (Vitesse VSC8234 port2 in slot1)
-
-PCIe:
- * PCIe1: Lanes A, B, C and D of Bank1 are connected to one x4 PCIe SLOT4
- * PCIe2: Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT3
-
-RapidIO:
- * sRIO1: Lanes E, F, G and H of Bank1 are connected to sRIO1 (SLOT3)
- * sRIO2: Lanes A, B, C and D of Bank1 are connected to sRIO2 (SLOT4)
-
-USB:
- * USB1: connected via an external ULPI PHY SMC3315 to a TYPE-A interface
- * USB2: connected via an external ULPI PHY SMC3315 to a TYPE-AB interface
-
-I2C:
- * I2C1_CH0: EEPROM AT24C64(0x50) RCW, AT24C02(0x51) DDR SPD,
-	     AT24C02(0x53) DDR SPD, AT24C02(0x57) SystemID, RTC DS3232(0x68)
- * I2C1_CH1: 1588 RiserCard(0x55), HSLB Testport, TempMon
-	     ADT7461(0x4C), SerDesMux DS64MB201(0x51/59/5C/5D)
- * I2C1_CH2: VDD/GVDD/GIDD ZL6100 (0x21/0x22/0x23/0x24/0x40)
- * I2C1_CH3: OCM CFG AT24C02(0x55), OCM IPL AT24C64(0x56)
- * I2C1_CH4: PCIe SLOT1
- * I2C1_CH5: PCIe SLOT2
- * I2C1_CH6: PCIe SLOT3
- * I2C1_CH7: PCIe SLOT4
- * I2C2: NULL
- * I2C3: NULL
-
-UART:
- * Supports two UARTs up to 115200 bps for console
-
-
-Boot from NOR flash
-===================
-1. Build image
-	export ARCH=powerpc
-	export CROSS_COMPILE=/your_path/gcc-4.5.xx-eglibc-2.11.xx/powerpc-linux-gnu/bin/powerpc-linux-gnu-
-	make P3060QDS_config
-	make
-
-2. Program image
-	=> tftp 1000000 u-boot.bin
-	=> protect off all
-	=> erase eff80000 efffffff
-	=> cp.b 1000000 eff80000 80000
-
-3. Program RCW
-	=> tftp 1000000 rcw.bin
-	=> protect off all
-	=> erase e8000000 e801ffff
-	=> cp.b 1000000 e8000000 50
-
-4. Program FMAN Firmware ucode
-	=> tftp 1000000 ucode.bin
-	=> protect off all
-	=> erase ef000000 ef0fffff
-	=> cp.b 1000000 ef000000 2000
-
-5. Change DIP-switch
-	RCW Location: SW1[1-5] = 01101 (eLBC 16bit NOR flash)
-	Note: 1 stands for 'on', 0 stands for 'off'
-
-
-Using the Device Tree Source File
-=================================
-To create the DTB (Device Tree Binary) image file, use a command
-similar to this:
-	dtc -O dtb -b 0 -p 1024 p3060qds.dts > p3060qds.dtb
-
-Or use the following command:
-	{linux-2.6}/make p3060qds.dtb ARCH=powerpc
-
-then the dtb file will be generated under the following directory:
-	{linux-2.6}/arch/powerpc/boot/p3060qds.dtb
-
-
-Booting Linux
-=============
-Place a linux uImage in the TFTP disk area.
-	tftp 1000000 uImage
-	tftp 2000000 rootfs.ext2.gz.uboot
-	tftp 3000000 p3060rdb.dtb
-	bootm 1000000 2000000 3000000
diff --git a/board/freescale/p3060qds/ddr.c b/board/freescale/p3060qds/ddr.c
deleted file mode 100644
index 9affbf09f78..00000000000
--- a/board/freescale/p3060qds/ddr.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <hwconfig.h>
-#include <asm/mmu.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
-#include <asm/fsl_law.h>
-
-#include "p3060qds.h"
-
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-
-phys_size_t fixed_sdram(void)
-{
-	int i;
-	char buf[32];
-	fsl_ddr_cfg_regs_t ddr_cfg_regs;
-	phys_size_t ddr_size;
-	unsigned int lawbar1_target_id;
-	ulong ddr_freq, ddr_freq_mhz;
-
-	ddr_freq = get_ddr_freq(0);
-	ddr_freq_mhz = ddr_freq / 1000000;
-
-	printf("Configuring DDR for %s MT/s data rate\n",
-				strmhz(buf, ddr_freq));
-
-	for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
-		if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
-		   (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
-			memcpy(&ddr_cfg_regs,
-				fixed_ddr_parm_0[i].ddr_settings,
-				sizeof(ddr_cfg_regs));
-			break;
-		}
-	}
-
-	if (fixed_ddr_parm_0[i].max_freq == 0)
-		panic("Unsupported DDR data rate %s MT/s data rate\n",
-			strmhz(buf, ddr_freq));
-
-	ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-	ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN;
-	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
-
-	/*
-	 * setup laws for DDR. If not interleaving, presuming half memory on
-	 * DDR1 and the other half on DDR2
-	 */
-	if (fixed_ddr_parm_0[i].ddr_settings->cs[0].config & 0x20000000) {
-		if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
-				 ddr_size,
-				 LAW_TRGT_IF_DDR_INTRLV) < 0) {
-			printf("ERROR setting Local Access Windows for DDR\n");
-			return 0;
-		}
-	} else {
-		lawbar1_target_id = LAW_TRGT_IF_DDR_1;
-		if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
-				 ddr_size,
-				 lawbar1_target_id) < 0) {
-			printf("ERROR setting Local Access Windows for DDR\n");
-			return 0;
-		}
-	}
-	return ddr_size;
-}
-
-struct board_specific_params {
-	u32 n_ranks;
-	u32 datarate_mhz_high;
-	u32 clk_adjust;
-	u32 wrlvl_start;
-	u32 cpo;
-	u32 write_data_delay;
-	u32 force_2T;
-};
-
-/*
- * This table contains all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-static const struct board_specific_params udimm[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi|  clk| wrlvl | cpo  |wrdata|2T
-	 * ranks| mhz|adjst| start |      |delay |
-	 */
-	{4,   850,    4,     6,   0xff,    2,  0},
-	{4,   950,    5,     7,   0xff,    2,  0},
-	{4,  1050,    5,     8,   0xff,    2,  0},
-	{4,  1250,    5,    10,   0xff,    2,  0},
-	{4,  1350,    5,    11,   0xff,    2,  0},
-	{4,  1666,    5,    12,   0xff,    2,  0},
-	{2,   850,    5,     6,   0xff,    2,  0},
-	{2,   950,    5,     7,   0xff,    2,  0},
-	{2,  1250,    4,     6,   0xff,    2,  0},
-	{2,  1350,    5,     7,   0xff,    2,  0},
-	{2,  1666,    5,     8,   0xff,    2,  0},
-	{1,   850,    4,     5,   0xff,    2,  0},
-	{1,   950,    4,     7,   0xff,    2,  0},
-	{1,  1666,    4,     8,   0xff,    2,  0},
-	{}
-};
-
-static const struct board_specific_params rdimm[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi|  clk| wrlvl | cpo  |wrdata|2T
-	 * ranks| mhz|adjst| start |      |delay |
-	 */
-	{4,   850,    4,     6,   0xff,    2,  0},
-	{4,   950,    5,     7,   0xff,    2,  0},
-	{4,  1050,    5,     8,   0xff,    2,  0},
-	{4,  1250,    5,    10,   0xff,    2,  0},
-	{4,  1350,    5,    11,   0xff,    2,  0},
-	{4,  1666,    5,    12,   0xff,    2,  0},
-	{2,   850,    4,     6,   0xff,    2,  0},
-	{2,  1050,    4,     7,   0xff,    2,  0},
-	{2,  1666,    4,     8,   0xff,    2,  0},
-	{1,   850,    4,     5,   0xff,    2,  0},
-	{1,   950,    4,     7,   0xff,    2,  0},
-	{1,  1666,    4,     8,   0xff,    2,  0},
-	{}
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	const struct board_specific_params *pbsp, *pbsp_highest = NULL;
-	ulong ddr_freq;
-
-	if (ctrl_num) {
-		printf("Wrong parameter for controller number %d", ctrl_num);
-		return;
-	}
-	if (!pdimm->n_ranks)
-		return;
-
-	if (popts->registered_dimm_en)
-		pbsp = rdimm;
-	else
-		pbsp = udimm;
-
-	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
-	 * freqency and n_banks specified in board_specific_parameters table.
-	 */
-	ddr_freq = get_ddr_freq(0) / 1000000;
-	while (pbsp->datarate_mhz_high) {
-		if (pbsp->n_ranks == pdimm->n_ranks) {
-			if (ddr_freq <= pbsp->datarate_mhz_high) {
-				popts->cpo_override = pbsp->cpo;
-				popts->write_data_delay =
-					pbsp->write_data_delay;
-				popts->clk_adjust = pbsp->clk_adjust;
-				popts->wrlvl_start = pbsp->wrlvl_start;
-				popts->twoT_en = pbsp->force_2T;
-				goto found;
-			}
-			pbsp_highest = pbsp;
-		}
-		pbsp++;
-	}
-
-	if (pbsp_highest) {
-		printf("Error: board specific timing not found "
-			"for data rate %lu MT/s!\n"
-			"Trying to use the highest speed (%u) parameters\n",
-			ddr_freq, pbsp_highest->datarate_mhz_high);
-		popts->cpo_override = pbsp_highest->cpo;
-		popts->write_data_delay = pbsp_highest->write_data_delay;
-		popts->clk_adjust = pbsp_highest->clk_adjust;
-		popts->wrlvl_start = pbsp_highest->wrlvl_start;
-		popts->twoT_en = pbsp_highest->force_2T;
-	} else {
-		panic("DIMM is not supported by this board");
-	}
-
-
-found:
-
-	/*
-	 * The datasheet of HMT125U7BFR8C-H9 blocks CL=7 as reservered.
-	 * However SPD still claims CL=7 is supported. Extensive tests
-	 * confirmed this board cannot work stably with CL=7 with this
-	 * particular DIMM.
-	 */
-	if (ddr_freq >= 800 && ddr_freq < 1066 && \
-		!strncmp(pdimm[0].mpart, "HMT125U7BFR8C-H9", 16)) {
-		popts->cas_latency_override = 1;
-		popts->cas_latency_override_value = 8;
-		debug("Override CL to 8\n");
-	}
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-	/*
-	 * Write leveling override
-	 */
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xf;
-
-	/*
-	 * Rtt and Rtt_WR override
-	 */
-	popts->rtt_override = 0;
-
-	/* Enable ZQ calibration */
-	popts->zq_en = 1;
-
-	/* DHC_EN =1, ODT = 60 Ohm */
-	popts->ddr_cdr1 = DDR_CDR1_DHC_EN;
-}
-
-phys_size_t initdram(int board_type)
-{
-	phys_size_t dram_size;
-
-	puts("Initializing....");
-
-	if (fsl_use_spd()) {
-		puts("using SPD\n");
-		dram_size = fsl_ddr_sdram();
-	} else {
-		puts("using fixed parameters\n");
-		dram_size = fixed_sdram();
-	}
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	debug("    DDR: ");
-	return dram_size;
-}
diff --git a/board/freescale/p3060qds/eth.c b/board/freescale/p3060qds/eth.c
deleted file mode 100644
index 3f812dbd3c9..00000000000
--- a/board/freescale/p3060qds/eth.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-#include <malloc.h>
-#include <fm_eth.h>
-#include <fsl_mdio.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <asm/fsl_dtsec.h>
-
-#include "../common/qixis.h"
-#include "../common/fman.h"
-
-#include "p3060qds_qixis.h"
-
-#define EMI_NONE       0xffffffff
-#define EMI1_RGMII1    0
-#define EMI1_SLOT1     1
-#define EMI1_SLOT2     2
-#define EMI1_SLOT3     3
-#define EMI1_RGMII2    4
-
-static int mdio_mux[NUM_FM_PORTS];
-
-static char *mdio_names[5] = {
-	"P3060QDS_MDIO0",
-	"P3060QDS_MDIO1",
-	"P3060QDS_MDIO2",
-	"P3060QDS_MDIO3",
-	"P3060QDS_MDIO4",
-};
-
-/*
- * Mapping of all 18 SERDES lanes to board slots.
- * A value of '0' here means that the mapping must be determined
- * dynamically, Lane 8/9/16/17 map to Slot1 or Aurora debug
- */
-static u8 lane_to_slot[] = {
-	4, 4, 4, 4, 3, 3, 3, 3, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0
-};
-
-static char *p3060qds_mdio_name_for_muxval(u32 muxval)
-{
-	return mdio_names[muxval];
-}
-
-struct mii_dev *mii_dev_for_muxval(u32 muxval)
-{
-	struct mii_dev *bus;
-	char *name = p3060qds_mdio_name_for_muxval(muxval);
-
-	if (!name) {
-		printf("No bus for muxval %x\n", muxval);
-		return NULL;
-	}
-
-	bus = miiphy_get_dev_by_name(name);
-
-	if (!bus) {
-		printf("No bus by name %s\n", name);
-		return NULL;
-	}
-
-	return bus;
-}
-
-struct p3060qds_mdio {
-	u32 muxval;
-	struct mii_dev *realbus;
-};
-
-static void p3060qds_mux_mdio(u32 muxval)
-{
-	u8 brdcfg4;
-
-	brdcfg4 = QIXIS_READ(brdcfg[4]);
-	brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
-	brdcfg4 |= (muxval << 4);
-	QIXIS_WRITE(brdcfg[4], brdcfg4);
-}
-
-static int p3060qds_mdio_read(struct mii_dev *bus, int addr, int devad,
-				int regnum)
-{
-	struct p3060qds_mdio *priv = bus->priv;
-
-	p3060qds_mux_mdio(priv->muxval);
-
-	return priv->realbus->read(priv->realbus, addr, devad, regnum);
-}
-
-static int p3060qds_mdio_write(struct mii_dev *bus, int addr, int devad,
-				int regnum, u16 value)
-{
-	struct p3060qds_mdio *priv = bus->priv;
-
-	p3060qds_mux_mdio(priv->muxval);
-
-	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
-}
-
-static int p3060qds_mdio_reset(struct mii_dev *bus)
-{
-	struct p3060qds_mdio *priv = bus->priv;
-
-	return priv->realbus->reset(priv->realbus);
-}
-
-static int p3060qds_mdio_init(char *realbusname, u32 muxval)
-{
-	struct p3060qds_mdio *pmdio;
-	struct mii_dev *bus = mdio_alloc();
-
-	if (!bus) {
-		printf("Failed to allocate P3060QDS MDIO bus\n");
-		return -1;
-	}
-
-	pmdio = malloc(sizeof(*pmdio));
-	if (!pmdio) {
-		printf("Failed to allocate P3060QDS private data\n");
-		free(bus);
-		return -1;
-	}
-
-	bus->read = p3060qds_mdio_read;
-	bus->write = p3060qds_mdio_write;
-	bus->reset = p3060qds_mdio_reset;
-	sprintf(bus->name, p3060qds_mdio_name_for_muxval(muxval));
-
-	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
-
-	if (!pmdio->realbus) {
-		printf("No bus with name %s\n", realbusname);
-		free(bus);
-		free(pmdio);
-		return -1;
-	}
-
-	pmdio->muxval = muxval;
-	bus->priv = pmdio;
-
-	return mdio_register(bus);
-}
-
-void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
-				enum fm_port port, int offset)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
-			  FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
-	if (mdio_mux[port] == EMI1_RGMII1)
-		fdt_set_phy_handle(blob, prop, pa, "phy_rgmii1");
-
-	if (mdio_mux[port] == EMI1_RGMII2)
-		fdt_set_phy_handle(blob, prop, pa, "phy_rgmii2");
-
-	if ((mdio_mux[port] == EMI1_SLOT1) && ((srds_prtcl == 0x3)
-		|| (srds_prtcl == 0x6))) {
-		switch (port) {
-		case FM2_DTSEC4:
-			fdt_set_phy_handle(blob, prop, pa, "phy2_slot1");
-			break;
-		case FM1_DTSEC4:
-			fdt_set_phy_handle(blob, prop, pa, "phy3_slot1");
-			break;
-		default:
-			break;
-		}
-	}
-
-	if (mdio_mux[port] == EMI1_SLOT3) {
-		switch (port) {
-		case FM2_DTSEC3:
-			fdt_set_phy_handle(blob, prop, pa, "phy0_slot3");
-			break;
-		case FM1_DTSEC3:
-			fdt_set_phy_handle(blob, prop, pa, "phy1_slot3");
-			break;
-		default:
-			break;
-		}
-	}
-}
-
-void fdt_fixup_board_enet(void *fdt)
-{
-	int i, lane, idx;
-
-	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
-		idx = i - FM1_DTSEC1;
-		switch (fm_info_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_SGMII:
-			lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
-			if (lane < 0)
-				break;
-
-			switch (mdio_mux[i]) {
-			case EMI1_SLOT1:
-				if (lane >= 14) {
-					fdt_status_okay_by_alias(fdt,
-						"emi1_slot1");
-					fdt_status_disabled_by_alias(fdt,
-						"emi1_slot1_bk1");
-				} else {
-					fdt_status_disabled_by_alias(fdt,
-						"emi1_slot1");
-					fdt_status_okay_by_alias(fdt,
-						"emi1_slot1_bk1");
-				}
-				break;
-			case EMI1_SLOT2:
-				fdt_status_okay_by_alias(fdt, "emi1_slot2");
-				break;
-			case EMI1_SLOT3:
-				fdt_status_okay_by_alias(fdt, "emi1_slot3");
-				break;
-			}
-		break;
-		case PHY_INTERFACE_MODE_RGMII:
-			if (i == FM1_DTSEC1)
-				fdt_status_okay_by_alias(fdt, "emi1_rgmii1");
-
-			if (i == FM1_DTSEC2)
-				fdt_status_okay_by_alias(fdt, "emi1_rgmii2");
-			break;
-		default:
-			break;
-		}
-	}
-#if (CONFIG_SYS_NUM_FMAN == 2)
-	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
-		idx = i - FM2_DTSEC1;
-		switch (fm_info_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_SGMII:
-			lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
-			if (lane >= 0) {
-				switch (mdio_mux[i]) {
-				case EMI1_SLOT1:
-					if (lane >= 14)
-						fdt_status_okay_by_alias(fdt,
-							"emi1_slot1");
-					else
-						fdt_status_okay_by_alias(fdt,
-							"emi1_slot1_bk1");
-					break;
-				case EMI1_SLOT2:
-					fdt_status_okay_by_alias(fdt,
-						"emi1_slot2");
-					break;
-				case EMI1_SLOT3:
-					fdt_status_okay_by_alias(fdt,
-						"emi1_slot3");
-					break;
-				}
-			}
-			break;
-		default:
-			break;
-		}
-	}
-#endif
-}
-
-static void initialize_lane_to_slot(void)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	int sdprtl = (in_be32(&gur->rcwsr[4]) &
-				FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
-	switch (sdprtl) {
-	case 0x03:
-	case 0x06:
-		lane_to_slot[8] = 1;
-		lane_to_slot[9] = lane_to_slot[8];
-		lane_to_slot[16] = 5;
-		lane_to_slot[17] = lane_to_slot[16];
-		break;
-	case 0x16:
-	case 0x19:
-	case 0x1C:
-		lane_to_slot[8] = 5;
-		lane_to_slot[9] = lane_to_slot[8];
-		lane_to_slot[16] = 1;
-		lane_to_slot[17] = lane_to_slot[16];
-		break;
-	default:
-		puts("Invalid SerDes protocol for P3060QDS\n");
-		break;
-	}
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_FMAN_ENET
-	struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
-	int i;
-	struct fsl_pq_mdio_info dtsec_mdio_info;
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	int srds_cfg = (in_be32(&gur->rcwsr[4]) &
-				FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
-	initialize_lane_to_slot();
-
-	/*
-	 * Set TBIPA on FM1@DTSEC1.  This is needed for configurations
-	 * where FM1@DTSEC1 isn't used directly, since it provides
-	 * MDIO for other ports.
-	 */
-	out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE);
-
-	/* Initialize the mdio_mux array so we can recognize empty elements */
-	for (i = 0; i < NUM_FM_PORTS; i++)
-		mdio_mux[i] = EMI_NONE;
-
-	dtsec_mdio_info.regs =
-		(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
-	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
-
-	/* Register the 1G MDIO bus */
-	fsl_pq_mdio_init(bis, &dtsec_mdio_info);
-
-	/* Register the 5 muxing front-ends to the MDIO buses */
-	if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_RGMII)
-		p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
-
-	if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_RGMII)
-		p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
-	p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
-	p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
-	p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
-
-	if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_RGMII)
-		fm_info_set_phy_address(FM1_DTSEC1, 1); /* RGMII1 */
-	else if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_SGMII)
-		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT2_PHY_ADDR);
-
-	if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_RGMII)
-		fm_info_set_phy_address(FM1_DTSEC2, 2); /* RGMII2 */
-	else if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_SGMII)
-		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
-
-	fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
-	fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT3_PHY_ADDR);
-
-	switch (srds_cfg) {
-	case 0x03:
-	case 0x06:
-		fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
-		fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT4_PHY_ADDR);
-		fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT1_PHY_ADDR);
-		fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT2_PHY_ADDR);
-		break;
-	case 0x16:
-	case 0x19:
-	case 0x1C:
-		fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT1_PHY_ADDR);
-		fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT2_PHY_ADDR);
-		fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT3_PHY_ADDR);
-		fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
-		break;
-	default:
-		puts("Invalid SerDes protocol for P3060QDS\n");
-		break;
-	}
-
-	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
-		int idx = i - FM1_DTSEC1, lane, slot;
-		switch (fm_info_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_SGMII:
-			lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
-			if (lane < 0)
-				break;
-			slot = lane_to_slot[lane];
-			if (QIXIS_READ(present) & (1 << (slot - 1)))
-				fm_disable_port(i);
-			switch (slot) {
-			case 1:
-				mdio_mux[i] = EMI1_SLOT1;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-				break;
-			case 2:
-				mdio_mux[i] = EMI1_SLOT2;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-				break;
-			case 3:
-				mdio_mux[i] = EMI1_SLOT3;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-				break;
-			};
-			break;
-		case PHY_INTERFACE_MODE_RGMII:
-			if (i == FM1_DTSEC1) {
-				mdio_mux[i] = EMI1_RGMII1;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-			} else if (i == FM1_DTSEC2) {
-				mdio_mux[i] = EMI1_RGMII2;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-			}
-			break;
-		default:
-			break;
-		}
-	}
-
-#if (CONFIG_SYS_NUM_FMAN == 2)
-	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
-		int idx = i - FM2_DTSEC1, lane, slot;
-		switch (fm_info_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_SGMII:
-			lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
-			if (lane < 0)
-				break;
-			slot = lane_to_slot[lane];
-			if (QIXIS_READ(present) & (1 << (slot - 1)))
-				fm_disable_port(i);
-			switch (slot) {
-			case 1:
-				mdio_mux[i] = EMI1_SLOT1;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-				break;
-			case 2:
-				mdio_mux[i] = EMI1_SLOT2;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-				break;
-			case 3:
-				mdio_mux[i] = EMI1_SLOT3;
-				fm_info_set_mdio(i,
-					mii_dev_for_muxval(mdio_mux[i]));
-				break;
-			};
-			break;
-		default:
-			break;
-		}
-	}
-#endif /* CONFIG_SYS_NUM_FMAN */
-
-	cpu_eth_init(bis);
-#endif /* CONFIG_FMAN_ENET */
-
-	return pci_eth_init(bis);
-}
diff --git a/board/freescale/p3060qds/fixed_ddr.c b/board/freescale/p3060qds/fixed_ddr.c
deleted file mode 100644
index 125988da829..00000000000
--- a/board/freescale/p3060qds/fixed_ddr.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#define CONFIG_SYS_DDR_TIMING_3_1200	0x01030000
-#define CONFIG_SYS_DDR_TIMING_0_1200	0xCC550104
-#define CONFIG_SYS_DDR_TIMING_1_1200	0x868FAA45
-#define CONFIG_SYS_DDR_TIMING_2_1200	0x0FB8A912
-#define CONFIG_SYS_DDR_MODE_1_1200	0x00441A40
-#define CONFIG_SYS_DDR_MODE_2_1200	0x00100000
-#define CONFIG_SYS_DDR_INTERVAL_1200	0x12480100
-#define CONFIG_SYS_DDR_CLK_CTRL_1200	0x02800000
-
-#define CONFIG_SYS_DDR_TIMING_3_1000	0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_1000	0xCC440104
-#define CONFIG_SYS_DDR_TIMING_1_1000	0x727DF944
-#define CONFIG_SYS_DDR_TIMING_2_1000	0x0FB088CF
-#define CONFIG_SYS_DDR_MODE_1_1000	0x00441830
-#define CONFIG_SYS_DDR_MODE_2_1000	0x00080000
-#define CONFIG_SYS_DDR_INTERVAL_1000	0x0F3C0100
-#define CONFIG_SYS_DDR_CLK_CTRL_1000	0x02800000
-
-#define CONFIG_SYS_DDR_TIMING_3_900	0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_900	0xCC440104
-#define CONFIG_SYS_DDR_TIMING_1_900	0x616ba844
-#define CONFIG_SYS_DDR_TIMING_2_900	0x0fb088ce
-#define CONFIG_SYS_DDR_MODE_1_900	0x00441620
-#define CONFIG_SYS_DDR_MODE_2_900	0x00080000
-#define CONFIG_SYS_DDR_INTERVAL_900	0x0db60100
-#define CONFIG_SYS_DDR_CLK_CTRL_900	0x02800000
-
-#define CONFIG_SYS_DDR_TIMING_3_800	0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_800	0xcc330104
-#define CONFIG_SYS_DDR_TIMING_1_800	0x6f6b4744
-#define CONFIG_SYS_DDR_TIMING_2_800	0x0fa888cc
-#define CONFIG_SYS_DDR_MODE_1_800	0x00441420
-#define CONFIG_SYS_DDR_MODE_2_800	0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_800	0x0c300100
-#define CONFIG_SYS_DDR_CLK_CTRL_800	0x02800000
-
-#define CONFIG_SYS_DDR_CS0_BNDS		0x000000FF
-#define CONFIG_SYS_DDR_CS1_BNDS		0x00000000
-#define CONFIG_SYS_DDR_CS2_BNDS		0x000000FF
-#define CONFIG_SYS_DDR_CS3_BNDS		0x000000FF
-#define CONFIG_SYS_DDR2_CS0_BNDS	0x000000FF
-#define CONFIG_SYS_DDR2_CS1_BNDS	0x00000000
-#define CONFIG_SYS_DDR2_CS2_BNDS	0x000000FF
-#define CONFIG_SYS_DDR2_CS3_BNDS	0x000000FF
-#define CONFIG_SYS_DDR_CS0_CONFIG	0xA0044202
-#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG	0x80004202
-#define CONFIG_SYS_DDR_CS2_CONFIG	0x00000000
-#define CONFIG_SYS_DDR_CS3_CONFIG	0x00000000
-#define CONFIG_SYS_DDR2_CS0_CONFIG	0x80044202
-#define CONFIG_SYS_DDR2_CS1_CONFIG	0x80004202
-#define CONFIG_SYS_DDR2_CS2_CONFIG	0x00000000
-#define CONFIG_SYS_DDR2_CS3_CONFIG	0x00000000
-#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG	0x80004202
-#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
-#define CONFIG_SYS_DDR_TIMING_4		0x00000001
-#define CONFIG_SYS_DDR_TIMING_5		0x02401400
-#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
-#define CONFIG_SYS_DDR_ZQ_CNTL		0x89080600
-#define CONFIG_SYS_DDR_WRLVL_CNTL	0x8675F607
-#define CONFIG_SYS_DDR_SDRAM_CFG	0xE7044000
-#define CONFIG_SYS_DDR_SDRAM_CFG2	0x24401031
-#define CONFIG_SYS_DDR_RCW_1		0x00000000
-#define CONFIG_SYS_DDR_RCW_2		0x00000000
-#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
-	.cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
-	.cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
-	.cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
-	.cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_900 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
-	.cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
-	.cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
-	.cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
-	.cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_900,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_900,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_900,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_900,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_900,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_900,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_900,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_900,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_1000 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
-	.cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
-	.cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
-	.cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
-	.cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1000,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1000,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1000,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1000,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1000,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1000,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1000,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1000,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_1200 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
-	.cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
-	.cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
-	.cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
-	.cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1200,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1200,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1200,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1200,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1200,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1200,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1200,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1200,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fixed_ddr_parm_t fixed_ddr_parm_0[] = {
-	{750, 850, &ddr_cfg_regs_800},
-	{850, 950, &ddr_cfg_regs_900},
-	{950, 1050, &ddr_cfg_regs_1000},
-	{1050, 1250, &ddr_cfg_regs_1200},
-	{0, 0, NULL}
-};
diff --git a/board/freescale/p3060qds/p3060qds.c b/board/freescale/p3060qds/p3060qds.c
deleted file mode 100644
index 43e7f2888a5..00000000000
--- a/board/freescale/p3060qds/p3060qds.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright 2011-2012 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <linux/compiler.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-#include <fm_eth.h>
-#include <configs/P3060QDS.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-#include "../common/qixis.h"
-#include "p3060qds.h"
-#include "p3060qds_qixis.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	u8 sw;
-	struct cpu_type *cpu = gd->cpu;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-	unsigned int i;
-
-	printf("Board: %s", cpu->name);
-	puts("QDS, ");
-
-	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
-		QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
-
-	sw = QIXIS_READ(brdcfg[0]);
-	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
-
-	if (sw < 0x8)
-		printf("vBank: %d\n", sw);
-	else if (sw == 0x8)
-		puts("Promjet\n");
-	else if (sw == 0x9)
-		puts("NAND\n");
-	else
-		printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
-
-	puts("Reset Configuration Word (RCW):");
-	for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
-		u32 rcw = in_be32(&gur->rcwsr[i]);
-
-		if ((i % 4) == 0)
-			printf("\n       %08x:", i * 4);
-		printf(" %08x", rcw);
-	}
-	puts("\n");
-
-	puts("SERDES Reference Clocks: ");
-	sw = QIXIS_READ(brdcfg[2]);
-	for (i = 0; i < 3; i++) {
-		static const char * const freq[] = {"100", "125", "Reserved",
-						"156.25"};
-		unsigned int clock = (sw >> (2 * i)) & 3;
-
-		printf("Bank%u=%sMhz ", i+1, freq[clock]);
-	}
-	puts("\n");
-
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	/* only single DDR controller on QDS board, disable DDR1_MCK4/5 */
-	setbits_be32(&gur->ddrclkdr, 0x00030000);
-
-	return 0;
-}
-
-void board_config_serdes_mux(void)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	int cfg = (in_be32(&gur->rcwsr[4]) &
-			FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
-	switch (cfg) {
-	case 0x03:
-	case 0x06:
-		/* set Lane I,J as SGMII */
-		QIXIS_WRITE(brdcfg[6], BRDCFG6_SD4MX_B | BRDCFG6_SD3MX_A |
-				       BRDCFG6_SD2MX_B | BRDCFG6_SD1MX_A);
-		break;
-	case 0x16:
-	case 0x19:
-	case 0x1c:
-		/* set Lane I,J as Aurora Debug */
-		QIXIS_WRITE(brdcfg[6], BRDCFG6_SD4MX_A | BRDCFG6_SD3MX_B |
-				       BRDCFG6_SD2MX_A | BRDCFG6_SD1MX_B);
-		break;
-	default:
-		puts("Invalid SerDes protocol for P3060QDS\n");
-		break;
-	}
-}
-
-void board_config_usb_mux(void)
-{
-	u8 brdcfg4, brdcfg5, brdcfg7;
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
-	u32 ec1 = rcwsr11 & FSL_CORENET_RCWSR11_EC1;
-	u32 ec2 = rcwsr11 & FSL_CORENET_RCWSR11_EC2;
-
-	brdcfg4 = QIXIS_READ(brdcfg[4]);
-	brdcfg4 &= ~BRDCFG4_EC_MODE_MASK;
-	if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_USB1) &&
-		 (ec2 == FSL_CORENET_RCWSR11_EC2_USB2)) {
-		brdcfg4 |= BRDCFG4_EC2_USB_EC1_USB;
-
-	} else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_USB1) &&
-		 ((ec2 == FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) ||
-		 (ec2 == FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))) {
-		brdcfg4 |= BRDCFG4_EC2_RGMII_EC1_USB;
-
-	} else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1) &&
-		 (ec2 == FSL_CORENET_RCWSR11_EC2_USB2)) {
-		brdcfg4 |= BRDCFG4_EC2_USB_EC1_RGMII;
-
-	} else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1) &&
-		 ((ec2 == FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) ||
-		 (ec2 == FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))) {
-		brdcfg4 |= BRDCFG4_EC2_RGMII_EC1_RGMII;
-	} else {
-		brdcfg4 |= BRDCFG4_EC2_MII_EC1_MII;
-	}
-	QIXIS_WRITE(brdcfg[4], brdcfg4);
-
-	brdcfg5 = QIXIS_READ(brdcfg[5]);
-	brdcfg5 &= ~(BRDCFG5_USB1ID_MASK | BRDCFG5_USB2ID_MASK);
-	brdcfg5 |= (BRDCFG5_USB1ID_CTRL | BRDCFG5_USB2ID_CTRL);
-	QIXIS_WRITE(brdcfg[5], brdcfg5);
-
-	brdcfg7 = BRDCFG7_JTAGMX_COP_JTAG | BRDCFG7_IQ1MX_IRQ_EVT |
-		BRDCFG7_G1MX_USB1 | BRDCFG7_D1MX_TSEC3USB | BRDCFG7_I3MX_USB1;
-	QIXIS_WRITE(brdcfg[7], brdcfg7);
-}
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash + PROMJET region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	/* invalidate existing TLB entry for flash + promjet */
-	disable_tlb(flash_esel);
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
-	set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
-	setup_portals();
-#endif
-	board_config_serdes_mux();
-	board_config_usb_mux();
-
-	return 0;
-}
-
-static const char *serdes_clock_to_string(u32 clock)
-{
-	switch (clock) {
-	case SRDS_PLLCR0_RFCK_SEL_100:
-		return "100";
-	case SRDS_PLLCR0_RFCK_SEL_125:
-		return "125";
-	case SRDS_PLLCR0_RFCK_SEL_156_25:
-		return "156.25";
-	default:
-		return "150";
-	}
-}
-
-#define NUM_SRDS_BANKS	3
-
-int misc_init_r(void)
-{
-	serdes_corenet_t *srds_regs;
-	u32 actual[NUM_SRDS_BANKS];
-	unsigned int i;
-	u8 sw;
-
-	sw = QIXIS_READ(brdcfg[2]);
-	for (i = 0; i < 3; i++) {
-		unsigned int clock = (sw >> (2 * i)) & 3;
-		switch (clock) {
-		case 0:
-			actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
-			break;
-		case 1:
-			actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
-			break;
-		case 3:
-			actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
-			break;
-		default:
-			printf("Warning: SDREFCLK%u switch setting of '10' is "
-				"unsupported\n", i + 1);
-			break;
-		}
-	}
-
-	srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
-	for (i = 0; i < NUM_SRDS_BANKS; i++) {
-		u32 pllcr0 = in_be32(&srds_regs->bank[i].pllcr0);
-		u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
-		if (expected != actual[i]) {
-			printf("Warning: SERDES bank %u expects reference clock"
-			       " %sMHz, but actual is %sMHz\n", i + 1,
-			       serdes_clock_to_string(expected),
-			       serdes_clock_to_string(actual[i]));
-		}
-	}
-
-	return 0;
-}
-
-/*
- * This is map of CVDD values. 33 means CVDD is 3.3v, 25 means CVDD is 2.5v,
- * 18 means CVDD is 1.8v.
- */
-static u8 IO_VSEL[] = {
-	33, 33, 33, 25, 25, 25, 18, 18, 18,
-	33, 33, 33, 25, 25, 25, 18, 18, 18,
-	33, 33, 33, 25, 25, 25, 18, 18, 18,
-	33, 33, 33, 33, 33
-};
-
-#define IO_VSEL_MASK	0x1f
-
-/*
- * different CVDD selects diffenert spi flashs, read dutcfg[3] to get CVDD,
- * then set status of  spi flash nodes to 'disabled' according to CVDD.
- * CVDD '33' will select spi flash0 and flash1, CVDD '25' will select spi
- * flash2, CVDD '18' will select spi flash3.
- */
-void fdt_fixup_board_spi(void *blob)
-{
-	u8 sw5 = QIXIS_READ(dutcfg[3]);
-
-	switch (IO_VSEL[sw5 & IO_VSEL_MASK]) {
-	/* 3.3v */
-	case 33:
-		do_fixup_by_compat(blob, "atmel,at45db081d", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		do_fixup_by_compat(blob, "spansion,sst25wf040", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		break;
-	/* 2.5v */
-	case 25:
-		do_fixup_by_compat(blob, "spansion,s25sl12801", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		do_fixup_by_compat(blob, "spansion,en25q32", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		do_fixup_by_compat(blob, "spansion,sst25wf040", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		break;
-	/* 1.8v */
-	case 18:
-		do_fixup_by_compat(blob, "spansion,s25sl12801", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		do_fixup_by_compat(blob, "spansion,en25q32", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		do_fixup_by_compat(blob, "atmel,at45db081d", "status",
-				"disabled", strlen("disabled") + 1, 1);
-		break;
-	}
-}
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = getenv_bootm_low();
-	size = getenv_bootm_size();
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-	fdt_fixup_dr_usb(blob, bd);
-#endif
-
-#ifdef CONFIG_PCI
-	pci_of_setup(blob, bd);
-#endif
-
-	fdt_fixup_liodn(blob);
-	fdt_fixup_dr_usb(blob, bd);
-	fdt_fixup_board_spi(blob);
-
-#ifdef CONFIG_SYS_DPAA_FMAN
-	fdt_fixup_fman_ethernet(blob);
-	fdt_fixup_board_enet(blob);
-#endif
-}
diff --git a/board/freescale/p3060qds/p3060qds_qixis.h b/board/freescale/p3060qds/p3060qds_qixis.h
deleted file mode 100644
index 4d5d6a25ebe..00000000000
--- a/board/freescale/p3060qds/p3060qds_qixis.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __P3060QDS_QIXIS_H__
-#define __P3060QDS_QIXIS_H__
-
-/* Definitions of QIXIS Registers for P3060QDS */
-
-/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
-#define BRDCFG4_EC_MODE_MASK		0x0F
-#define BRDCFG4_EC2_MII_EC1_MII	0x00
-#define BRDCFG4_EC2_MII_EC1_USB	0x03
-#define BRDCFG4_EC2_USB_EC1_MII	0x0C
-#define BRDCFG4_EC2_USB_EC1_USB	0x0F
-#define BRDCFG4_EC2_USB_EC1_RGMII	0x0E
-#define BRDCFG4_EC2_RGMII_EC1_USB	0x0B
-#define BRDCFG4_EC2_RGMII_EC1_RGMII	0x0A
-#define BRDCFG4_EMISEL_MASK		0xF0
-
-#define BRDCFG5_ECLKS_MASK		0x80
-#define BRDCFG5_USB1ID_MASK		0x40
-#define BRDCFG5_USB2ID_MASK		0x20
-#define BRDCFG5_GC2MX_MASK		0x0C
-#define BRDCFG5_T15MX_MASK		0x03
-#define BRDCFG5_ECLKS_IEEE1588_CM	0x80
-#define BRDCFG5_USB1ID_CTRL		0x40
-#define BRDCFG5_USB2ID_CTRL		0x20
-
-#define BRDCFG6_SD1MX_A		0x01
-#define BRDCFG6_SD1MX_B		0x00
-#define BRDCFG6_SD2MX_A		0x02
-#define BRDCFG6_SD2MX_B		0x00
-#define BRDCFG6_SD3MX_A		0x04
-#define BRDCFG6_SD3MX_B		0x00
-#define BRDCFG6_SD4MX_A		0x08
-#define BRDCFG6_SD4MX_B		0x00
-
-#define BRDCFG7_JTAGMX_MASK		0xC0
-#define BRDCFG7_IQ1MX_MASK		0x20
-#define BRDCFG7_G1MX_MASK		0x10
-#define BRDCFG7_D1MX_MASK		0x0C
-#define BRDCFG7_I3MX_MASK		0x03
-#define BRDCFG7_JTAGMX_AURORA		0x00
-#define BRDCFG7_JTAGMX_FPGA		0x80
-#define BRDCFG7_JTAGMX_COP_JTAG	0xC0
-#define BRDCFG7_IQ1MX_IRQ_EVT		0x00
-#define BRDCFG7_IQ1MX_USB2		0x20
-#define BRDCFG7_G1MX_USB1		0x00
-#define BRDCFG7_G1MX_TSEC3		0x10
-#define BRDCFG7_D1MX_DMA		0x00
-#define BRDCFG7_D1MX_TSEC3USB		0x04
-#define BRDCFG7_D1MX_HDLC2		0x08
-#define BRDCFG7_I3MX_UART2_I2C34	0x00
-#define BRDCFG7_I3MX_GPIO_EVT		0x01
-#define BRDCFG7_I3MX_USB1		0x02
-#define BRDCFG7_I3MX_TSEC3		0x03
-
-#endif
diff --git a/boards.cfg b/boards.cfg
index 091c79f5cf3..f789539e858 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -809,29 +809,24 @@ P2041RDB_NAND	             powerpc     mpc85xx     p2041rdb            freescale
 P2041RDB_SDCARD              powerpc     mpc85xx     p2041rdb            freescale      -           P2041RDB:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
 P2041RDB_SECURE_BOOT         powerpc     mpc85xx     p2041rdb            freescale      -           P2041RDB:SECURE_BOOT
 P2041RDB_SPIFLASH            powerpc     mpc85xx     p2041rdb            freescale      -           P2041RDB:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
+P2041RDB_SRIO_PCIE_BOOT          powerpc     mpc85xx     p2041rdb          freescale      -           P2041RDB:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
 P3041DS                      powerpc     mpc85xx     corenet_ds          freescale
 P3041DS_NAND		     powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
 P3041DS_SDCARD		     powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
 P3041DS_SECURE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:SECURE_BOOT
 P3041DS_SPIFLASH	     powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
-P3041DS_SRIOBOOT_MASTER		     powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:SRIOBOOT_MASTER
-P3041DS_SRIOBOOT_SLAVE          powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
-P3060QDS		     powerpc	 mpc85xx     p3060qds		 freescale
-P3060QDS_NAND		     powerpc     mpc85xx     p3060qds		 freescale	-	    P3060QDS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
-P3060QDS_SECURE_BOOT         powerpc     mpc85xx     p3060qds            freescale      -           P3060QDS:SECURE_BOOT
+P3041DS_SRIO_PCIE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P3041DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
 P4080DS                      powerpc     mpc85xx     corenet_ds          freescale
 P4080DS_SDCARD		     powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
 P4080DS_SECURE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:SECURE_BOOT
 P4080DS_SPIFLASH	     powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
-P4080DS_SRIOBOOT_MASTER		     powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:SRIOBOOT_MASTER
-P4080DS_SRIOBOOT_SLAVE          powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
+P4080DS_SRIO_PCIE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P4080DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
 P5020DS                      powerpc     mpc85xx     corenet_ds          freescale
 P5020DS_NAND		     powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
 P5020DS_SDCARD		     powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
 P5020DS_SECURE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:SECURE_BOOT
 P5020DS_SPIFLASH	     powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
-P5020DS_SRIOBOOT_MASTER		     powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:SRIOBOOT_MASTER
-P5020DS_SRIOBOOT_SLAVE          powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
+P5020DS_SRIO_PCIE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
 BSC9131RDB_SPIFLASH          powerpc     mpc85xx     bsc9131rdb          freescale      -           BSC9131RDB:BSC9131RDB,SPIFLASH
 stxgp3                       powerpc     mpc85xx     stxgp3              stx
 stxssa                       powerpc     mpc85xx     stxssa              stx            -           stxssa
diff --git a/common/env_remote.c b/common/env_remote.c
index 3bf0f957b3a..a7b147b20db 100644
--- a/common/env_remote.c
+++ b/common/env_remote.c
@@ -62,8 +62,8 @@ int env_init(void)
 #ifdef CONFIG_CMD_SAVEENV
 int saveenv(void)
 {
-#ifdef CONFIG_SRIOBOOT_SLAVE
-	printf("Can not support the 'saveenv' when boot from SRIO!\n");
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+	printf("Can not support the 'saveenv' when boot from SRIO or PCIE!\n");
 	return 1;
 #else
 	return 0;
diff --git a/common/image.c b/common/image.c
index 70a112d36f0..f084d2baed3 100644
--- a/common/image.c
+++ b/common/image.c
@@ -143,6 +143,7 @@ static const table_entry_t uimage_type[] = {
 	{	IH_TYPE_INVALID,    NULL,	  "Invalid Image",	},
 	{	IH_TYPE_MULTI,	    "multi",	  "Multi-File Image",	},
 	{	IH_TYPE_OMAPIMAGE,  "omapimage",  "TI OMAP SPL With GP CH",},
+	{	IH_TYPE_PBLIMAGE,   "pblimage",   "Freescale PBL Boot Image",},
 	{	IH_TYPE_RAMDISK,    "ramdisk",	  "RAMDisk Image",	},
 	{	IH_TYPE_SCRIPT,     "script",	  "Script",		},
 	{	IH_TYPE_STANDALONE, "standalone", "Standalone Program", },
diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
index 5e216587659..f94b56f628c 100644
--- a/doc/README.fsl-ddr
+++ b/doc/README.fsl-ddr
@@ -1,5 +1,28 @@
-
-Table of interleaving modes supported in cpu/8xxx/ddr/
+Table of interleaving 2-4 controllers
+=====================================
+  +--------------+-----------------------------------------------------------+
+  |Configuration |                    Memory Controller                      |
+  |              |       1              2              3             4       |
+  |--------------+--------------+--------------+-----------------------------+
+  | Two memory   | Not Intlv'ed | Not Intlv'ed |                             |
+  | complexes    +--------------+--------------+                             |
+  |              |      2-way Intlv'ed         |                             |
+  |--------------+--------------+--------------+--------------+              |
+  |              | Not Intlv'ed | Not Intlv'ed | Not Intlv'ed |              |
+  | Three memory +--------------+--------------+--------------+              |
+  | complexes    |         2-way Intlv'ed      | Not Intlv'ed |              |
+  |              +-----------------------------+--------------+              |
+  |              |                  3-way Intlv'ed            |              |
+  +--------------+--------------+--------------+--------------+--------------+
+  |              | Not Intlv'ed | Not Intlv'ed | Not Intlv'ed | Not Intlv'ed |
+  | Four memory  +--------------+--------------+--------------+--------------+
+  | complexes    |       2-way Intlv'ed        |       2-way Intlv'ed        |
+  |              +-----------------------------+-----------------------------+
+  |              |                      4-way Intlv'ed                       |
+  +--------------+-----------------------------------------------------------+
+
+
+Table of 2-way interleaving modes supported in cpu/8xxx/ddr/
 ======================================================
   +-------------+---------------------------------------------------------+
   |		|		    Rank Interleaving			  |
@@ -56,6 +79,15 @@ The ways to configure the ddr interleaving mode
   # superbank
   setenv hwconfig "fsl_ddr:ctlr_intlv=superbank"
 
+  # 1KB 3-way interleaving
+  setenv hwconfig "fsl_ddr:ctlr_intlv=3way_1KB"
+
+  # 4KB 3-way interleaving
+  setenv hwconfig "fsl_ddr:ctlr_intlv=3way_4KB"
+
+  # 8KB 3-way interleaving
+  setenv hwconfig "fsl_ddr:ctlr_intlv=3way_8KB"
+
   # disable bank (chip-select) interleaving
   setenv hwconfig "fsl_ddr:bank_intlv=null"
 
diff --git a/doc/README.pblimage b/doc/README.pblimage
new file mode 100644
index 00000000000..2b9bb5c5f5b
--- /dev/null
+++ b/doc/README.pblimage
@@ -0,0 +1,114 @@
+------------------------------------------------------------------
+Freescale PBL(pre-boot loader) Boot Image generation using mkimage
+------------------------------------------------------------------
+
+The CoreNet SoC's can boot directly from eSPI FLASH, SD/MMC and
+NAND, etc. These SoCs use PBL to load RCW and/or pre-initialization
+instructions. For more details refer section 5 Pre-boot loader
+specifications of reference manual P3041RM/P4080RM/P5020RM at link:
+http://www.freescale.com/webapp/search/Serp.jsp?Reference+Manuals
+
+Building PBL Boot Image and boot steps
+--------------------------------------
+
+1. Building PBL Boot Image.
+   The default Image is u-boot.pbl.
+
+   For eSPI boot(available on P3041/P4080/P5020):
+	To build the eSPI boot image:
+	make <board_name>_SPIFLASH_config
+	make u-boot.pbl
+
+   For SD boot(available on P3041/P4080/P5020):
+	To build the SD boot image:
+	make <board_name>_SDCARD_config
+	make u-boot.pbl
+
+   For Nand boot(available on P3041/P5020):
+	To build the NAND boot image:
+	make <board_name>_NAND_config
+	make u-boot.pbl
+
+
+2. pblimage support available with mkimage utility will generate Freescale PBL
+boot image that can be flashed on the board eSPI flash, SD/MMC and NAND.
+Following steps describe it in detail.
+
+	1). Boot from eSPI flash
+	Write u-boot.pbl to eSPI flash from offset 0x0.
+	for ex in u-boot:
+	=>tftp 100000 u-boot.pbl
+	=>sf probe 0
+	=>sf erase 0 100000
+	=>sf write 100000 0 $filesize
+	Change SW1[1:5] = off off on off on.
+
+	2). Boot from SD/MMC
+	Write u-boot.pbl to SD/MMC from offset 0x1000.
+	for ex in u-boot:
+	=>tftp 100000 u-boot.pbl
+	=>mmcinfo
+	=>mmc write 100000 8 441
+	Change SW1[1:5] = off off on on off.
+
+	3). Boot from Nand
+	Write u-boot.pbl to Nand from offset 0x0.
+	for ex in u-boot:
+	=>tftp 100000 u-boot.pbl
+	=>nand info
+	=>nand erase 0 100000
+	=>nand write 100000 0 $filesize
+	Change SW1[1:5] = off on off off on
+	Change SW7[1:4] = on off off on
+
+Board specific configuration file specifications:
+------------------------------------------------
+1. Configuration files rcw.cfg and pbi.cfg must present in the
+board/freescale/corenet_ds/, rcw.cfg is for RCW, pbi.cfg is for
+PBI instructions. File name must not be changed since they are used
+in Makefile.
+2. These files can have empty lines and lines starting with "#" as first
+character to put comments
+
+Typical example of rcw.cfg file:
+-----------------------------------
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+4c580000 00000000 18185218 0000cccc
+40464000 3c3c2000 58000000 61000000
+00000000 00000000 00000000 008b6000
+00000000 00000000 00000000 00000000
+
+Typical example of pbi.cfg file:
+-----------------------------------
+
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+09010100 00000000
+09010104 fff0000b
+09010f00 08000000
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff00000
+09000d08 81000013
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Initialize eSPI controller
+09110000 80000403
+09110020 2d170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
+
+------------------------------------------------
+Author: Shaohui Xie<Shaohui.Xie@freescale.com>
diff --git a/doc/README.srio-boot-corenet b/doc/README.srio-boot-corenet
deleted file mode 100644
index 56b094c9a27..00000000000
--- a/doc/README.srio-boot-corenet
+++ /dev/null
@@ -1,103 +0,0 @@
-------------------------------
-SRIO Boot on Corenet Platforms
-------------------------------
-
-For some PowerPC processors with SRIO interface, boot location can be configured
-to SRIO by RCW. The processor booting from SRIO can do without flash for u-boot
-image, ucode and ENV. All the images can be fetched from another processor's
-memory space by SRIO link connected between them.
-
-This document describes the processes based on an example implemented on P4080DS
-platforms and a RCW example with boot from SRIO configuration.
-
-Environment of the SRIO boot:
-	a) Master and slave can be SOCs in one board or SOCs in separate boards.
-	b) They are connected with SRIO links, whether 1x or 4x, and directly or
-	   through switch system.
-	c) Only Master has NorFlash for booting, and all the Master's and Slave's
-	   U-Boot images, UCodes will be stored in this flash.
-	d) Slave has its own EEPROM for RCW and PBI.
-	e) Slave's RCW should configure the SerDes for SRIO boot port, set the boot
-	   location to SRIO, and holdoff all the cores if needed.
-
-	----------        -----------             -----------
-	|		  |       |         |             |         |
-	|		  |       |         |             |         |
-	| NorFlash|<----->| Master  |    SRIO     |  Slave  |<---->[EEPROM]
-	|		  |       |         |<===========>|         |
-	|		  |       |         |             |         |
-	----------        -----------             -----------
-
-The example based on P4080DS platform:
-	Two P4080DS platforms can be used to implement the boot from SRIO. Their SRIO
-	ports 0 will be connected directly and will be used for the boot from SRIO.
-
-	1. Slave's RCW example for boot from SRIO port 0 and core 0 not in holdoff.
-		00000000: aa55 aa55 010e 0100 0c58 0000 0000 0000
-		00000010: 1818 1818 0000 8888 7440 4000 0000 2000
-		00000020: f400 0000 0100 0000 0000 0000 0000 0000
-		00000030: 0000 0000 0083 0000 0000 0000 0000 0000
-		00000040: 0000 0000 0000 0000 0813 8040 698b 93fe
-
-	2. Slave's RCW example for boot from SRIO port 0 and all cores in holdoff.
-		00000000: aa55 aa55 010e 0100 0c58 0000 0000 0000
-		00000010: 1818 1818 0000 8888 7440 4000 0000 2000
-		00000020: f440 0000 0100 0000 0000 0000 0000 0000
-		00000030: 0000 0000 0083 0000 0000 0000 0000 0000
-		00000040: 0000 0000 0000 0000 0813 8040 063c 778f
-
-	3. Sequence in Step by Step.
-		a) Update RCW for slave with boot from SRIO port 0 configuration.
-		b) Program slave's U-Boot image, UCode, and ENV parameters into master's
-		   NorFlash.
-		c) Start up master and it will boot up normally from its NorFlash.
-		   Then, it will finish necessary configurations for slave's boot from
-		   SRIO port 0.
-		d) Master will set inbound SRIO windows covered slave's U-Boot image stored
-		   in master's NorFlash.
-		e) Master will set an inbound SRIO window covered slave's UCode stored in
-		   master's NorFlash.
-		f) Master will set an inbound SRIO window covered slave's ENV stored in
-		   master's NorFlash.
-		g) If need to release slave's core, master will set outbound SRIO windows
-		   in order to configure slave's registers for the core's releasing.
-		h) If all cores of slave in holdoff, slave should be powered on before all
-		   the above master's steps, and wait to be released by master. If not all
-		   cores in holdoff, that means core 0 will start up normally, slave should
-		   be powered on after all the above master's steps. In the startup phase
-		   of the slave from SRIO, it will finish some necessary configurations.
-		i) Slave will set a specific TLB entry for the boot process.
-		j) Slave will set a LAW entry with the TargetID SRIO port 0 for the boot.
-		k) Slave will set a specific TLB entry in order to fetch UCode and ENV
-		   from master.
-		l) Slave will set a LAW entry with the TargetID SRIO port 0 for UCode and ENV.
-
-How to use this feature:
-	To use this feature, you need to focus three points.
-
-	1. Slave's RCW with SRIO boot configurations, and all cores in holdoff
-	   configurations if needed.
-	   Please refer to the examples given above.
-
-	2. U-Boot image's compilation.
-		For master, U-Boot image should be generated specifically by
-
-				make xxxx_SRIOBOOT_MASTER_config.
-
-		For example, master U-Boot image used on P4080DS should be compiled with
-
-				make P4080DS_SRIOBOOT_MASTER_config.
-
-		For slave, U-Boot image should be generated specifically by
-
-				make xxxx_SRIOBOOT_SLAVE_config.
-
-		For example, slave U-Boot image used on P4080DS should be compiled with
-
-				make P4080DS_SRIOBOOT_SLAVE_config.
-
-	3. Necessary modifications based on a specific environment.
-		For a specific environment, the SRIO port for boot, the addresses of the
-		slave's U-Boot image, UCode, ENV stored in master's NorFlash, and any other
-		configurations can be modified in the file:
-					include/configs/corenet_ds.h.
diff --git a/doc/README.srio-pcie-boot-corenet b/doc/README.srio-pcie-boot-corenet
new file mode 100644
index 00000000000..cd7e7ee9b34
--- /dev/null
+++ b/doc/README.srio-pcie-boot-corenet
@@ -0,0 +1,112 @@
+---------------------------------------
+SRIO and PCIE Boot on Corenet Platforms
+---------------------------------------
+
+For some PowerPC processors with SRIO or PCIE interface, boot location can be
+configured to SRIO or PCIE by RCW. The processor booting from SRIO or PCIE can
+do without flash for u-boot image, ucode and ENV. All the images can be fetched
+from another processor's memory space by SRIO or PCIE link connected between
+them.
+
+This document describes the processes based on an example implemented on P4080DS
+platforms and a RCW example with boot from SRIO or PCIE configuration.
+
+Environment of the SRIO or PCIE boot:
+	a) Master and slave can be SOCs in one board or SOCs in separate boards.
+	b) They are connected with SRIO or PCIE links, whether 1x, 2x or 4x, and
+	   directly or through switch system.
+	c) Only Master has NorFlash for booting, and all the Master's and Slave's
+	   U-Boot images, UCodes will be stored in this flash.
+	d) Slave has its own EEPROM for RCW and PBI.
+	e) Slave's RCW should configure the SerDes for SRIO or PCIE boot port, set
+	   the boot location to SRIO or PCIE, and holdoff all the cores.
+
+	----------        -----------             -----------
+	|		  |       |         |             |         |
+	|		  |       |         |             |         |
+	| NorFlash|<----->| Master  |SRIO or PCIE |  Slave  |<---->[EEPROM]
+	|		  |       |         |<===========>|         |
+	|		  |       |         |             |         |
+	----------        -----------             -----------
+
+The example based on P4080DS platform:
+	Two P4080DS platforms can be used to implement the boot from SRIO or PCIE.
+	Their SRIO or PCIE ports 1 will be connected directly and will be used for
+	the boot from SRIO or PCIE.
+
+	1. Slave's RCW example for boot from SRIO port 1 and all cores in holdoff.
+		00000000: aa55 aa55 010e 0100 0c58 0000 0000 0000
+		00000010: 1818 1818 0000 8888 7440 4000 0000 2000
+		00000020: f440 0000 0100 0000 0000 0000 0000 0000
+		00000030: 0000 0000 0083 0000 0000 0000 0000 0000
+		00000040: 0000 0000 0000 0000 0813 8040 063c 778f
+
+	2. Slave's RCW example for boot from PCIE port 1 and all cores in holdoff.
+		00000000: aa55 aa55 010e 0100 0c58 0000 0000 0000
+		00000010: 1818 1818 0000 8888 1440 4000 0000 2000
+		00000020: f040 0000 0100 0000 0020 0000 0000 0000
+		00000030: 0000 0000 0083 0000 0000 0000 0000 0000
+		00000040: 0000 0000 0000 0000 0813 8040 547e ffc9
+
+	3. Sequence in Step by Step.
+		a) Update RCW for slave with boot from SRIO or PCIE port 1 configuration.
+		b) Program slave's U-Boot image, UCode, and ENV parameters into master's
+		   NorFlash.
+		c) Set environment variable "bootmaster" to "SRIO1" or "PCIE1" and save
+		   environment for master.
+					setenv bootmaster SRIO1
+				or
+					setenv bootmaster PCIE1
+					saveenv
+		d) Restart up master and it will boot up normally from its NorFlash.
+		   Then, it will finish necessary configurations for slave's boot from
+		   SRIO or PCIE port 1.
+		e) Master will set inbound SRIO or PCIE windows covered slave's U-Boot
+		   image stored in master's NorFlash.
+		f) Master will set an inbound SRIO or PCIE window covered slave's UCode
+		   and ENV stored in master's NorFlash.
+		g) Master will set outbound SRIO or PCIE  windows in order to configure
+		   slave's registers for the core's releasing.
+		h) Since all cores of slave in holdoff, slave should be powered on before
+		   all the above master's steps, and wait to be released by master. In the
+		   startup phase of the slave from SRIO or PCIE, it will finish some
+		   necessary configurations.
+		i) Slave will set a specific TLB entry for the boot process.
+		j) Slave will set a LAW entry with the TargetID SRIO or PCIE port 1 for
+		   the boot.
+		k) Slave will set a specific TLB entry in order to fetch UCode and ENV
+		   from master.
+		l) Slave will set a LAW entry with the TargetID SRIO or PCIE port 1 for
+		   UCode and ENV.
+
+How to use this feature:
+	To use this feature, you need to focus those points.
+
+	1. Slave's RCW with SRIO or PCIE boot configurations, and all cores in holdoff
+	   configurations.
+	   Please refer to the examples given above.
+
+	2. U-Boot image's compilation.
+		For master, U-Boot image should be generated normally.
+
+		For example, master U-Boot image used on P4080DS should be compiled with
+
+				make P4080DS_config.
+
+		For slave, U-Boot image should be generated specifically by
+
+				make xxxx_SRIO_PCIE_BOOT_config.
+
+		For example, slave U-Boot image used on P4080DS should be compiled with
+
+				make P4080DS_SRIO_PCIE_BOOT_config.
+
+	3. Necessary modifications based on a specific environment.
+		For a specific environment, the addresses of the slave's U-Boot image,
+		UCode, ENV stored in master's NorFlash, and any other configurations
+		can be modified in the file:
+					include/configs/corenet_ds.h.
+
+	4. Set and save the environment variable "bootmaster" with "SRIO1", "SRIO2"
+	   or "PCIE1", "PCIE2", "PCIE3" for master, and then restart it in order to
+	   perform the role as a master for boot from SRIO or PCIE.
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index a7d04b7ea39..223cd5d65c8 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -275,5 +275,59 @@ void init_laws(void)
 				law_table[i].size, law_table[i].trgt_id);
 	}
 
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+	/* check RCW to get which port is used for boot */
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	u32 bootloc = in_be32(&gur->rcwsr[6]);
+	/*
+	 * in SRIO or PCIE boot we need to set specail LAWs for
+	 * SRIO or PCIE interfaces.
+	 */
+	switch ((bootloc & FSL_CORENET_RCWSR6_BOOT_LOC) >> 23) {
+	case 0x0: /* boot from PCIE1 */
+		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
+				LAW_SIZE_1M,
+				LAW_TRGT_IF_PCIE_1);
+		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
+				LAW_SIZE_1M,
+				LAW_TRGT_IF_PCIE_1);
+		break;
+	case 0x1: /* boot from PCIE2 */
+		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
+				LAW_SIZE_1M,
+				LAW_TRGT_IF_PCIE_2);
+		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
+				LAW_SIZE_1M,
+				LAW_TRGT_IF_PCIE_2);
+		break;
+	case 0x2: /* boot from PCIE3 */
+		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
+				LAW_SIZE_1M,
+				LAW_TRGT_IF_PCIE_3);
+		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
+				LAW_SIZE_1M,
+				LAW_TRGT_IF_PCIE_3);
+		break;
+	case 0x8: /* boot from SRIO1 */
+		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
+				LAW_SIZE_1M,
+				LAW_TRGT_IF_RIO_1);
+		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
+				LAW_SIZE_1M,
+				LAW_TRGT_IF_RIO_1);
+		break;
+	case 0x9: /* boot from SRIO2 */
+		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
+				LAW_SIZE_1M,
+				LAW_TRGT_IF_RIO_2);
+		set_next_law(CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
+				LAW_SIZE_1M,
+				LAW_TRGT_IF_RIO_2);
+		break;
+	default:
+		break;
+	}
+#endif
+
 	return ;
 }
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 072b178a04a..cc573547557 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -36,10 +36,8 @@ COBJS-y += tgec_phy.o
 COBJS-$(CONFIG_P1017)	+= p1023.o
 COBJS-$(CONFIG_P1023)	+= p1023.o
 # The P204x, P304x, and P5020 are the same
-COBJS-$(CONFIG_PPC_P2040) += p5020.o
 COBJS-$(CONFIG_PPC_P2041) += p5020.o
 COBJS-$(CONFIG_PPC_P3041) += p5020.o
-COBJS-$(CONFIG_PPC_P3060) += p3060.o
 COBJS-$(CONFIG_PPC_P4080) += p4080.o
 COBJS-$(CONFIG_PPC_P5020) += p5020.o
 endif
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index 953c359e6e4..736b8b95829 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -50,6 +50,9 @@ struct fm_eth_info fm_info[] = {
 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 4)
 	FM_DTSEC_INFO_INITIALIZER(2, 4),
 #endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 5)
+	FM_DTSEC_INFO_INITIALIZER(2, 5),
+#endif
 #if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
 	FM_TGEC_INFO_INITIALIZER(1, 1),
 #endif
@@ -152,6 +155,22 @@ void fm_info_set_phy_address(enum fm_port port, int address)
 }
 
 /*
+ * Returns the PHY address for a given Fman port
+ *
+ * The port must be set via a prior call to fm_info_set_phy_address().
+ * A negative error code is returned if the port is invalid.
+ */
+int fm_info_get_phy_address(enum fm_port port)
+{
+	int i = fm_port_to_index(port);
+
+	if (i == -1)
+		return -1;
+
+	return fm_info[i].phy_addr;
+}
+
+/*
  * Returns the type of the data interface between the given MAC and its PHY.
  * This is typically determined by the RCW.
  */
@@ -181,7 +200,8 @@ void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
 
 static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
 {
-	int off, ph;
+	int off;
+	uint32_t ph;
 	phys_addr_t paddr = CONFIG_SYS_CCSRBAR_PHYS + info->compat_offset;
 	u64 dtsec1_addr = (u64)CONFIG_SYS_CCSRBAR_PHYS +
 				CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET;
@@ -198,12 +218,10 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
 	off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
 
 	/* Don't disable FM1-DTSEC1 MAC as its used for MDIO */
-	if (paddr != dtsec1_addr) {
-		/* disable the mac node */
-		fdt_setprop_string(blob, off, "status", "disabled");
-	}
+	if (paddr != dtsec1_addr)
+		fdt_status_disabled(blob, off); /* disable the MAC node */
 
-	/* disable the node point to the mac */
+	/* disable the fsl,dpa-ethernet node that points to the MAC */
 	ph = fdt_get_phandle(blob, off);
 	do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph),
 		"status", "disabled", strlen("disabled") + 1, 1);
diff --git a/drivers/net/fm/p3060.c b/drivers/net/fm/p3060.c
deleted file mode 100644
index c9748a954cc..00000000000
--- a/drivers/net/fm/p3060.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <phy.h>
-#include <fm_eth.h>
-#include <asm/io.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_serdes.h>
-
-u32 port_to_devdisr[] = {
-	[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
-	[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
-	[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
-	[FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
-	[FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1,
-	[FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2,
-	[FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3,
-	[FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4,
-};
-
-static int is_device_disabled(enum fm_port port)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 devdisr2 = in_be32(&gur->devdisr2);
-
-	return port_to_devdisr[port] & devdisr2;
-}
-
-void fman_disable_port(enum fm_port port)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	/* don't allow disabling of DTSEC1 as its needed for MDIO */
-	if (port == FM1_DTSEC1)
-		return;
-
-	setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
-}
-
-phy_interface_t fman_port_enet_if(enum fm_port port)
-{
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
-
-	if (is_device_disabled(port))
-		return PHY_INTERFACE_MODE_NONE;
-
-	/* handle RGMII/MII first */
-	if ((port == FM1_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) ==
-		FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1))
-		return PHY_INTERFACE_MODE_RGMII;
-
-	if ((port == FM1_DTSEC2) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
-		FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2))
-		return PHY_INTERFACE_MODE_RGMII;
-
-	if ((port == FM2_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
-		FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))
-		return PHY_INTERFACE_MODE_RGMII;
-
-	switch (port) {
-	case FM1_DTSEC1:
-	case FM1_DTSEC2:
-	case FM1_DTSEC3:
-	case FM1_DTSEC4:
-		if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
-			return PHY_INTERFACE_MODE_SGMII;
-		break;
-	case FM2_DTSEC1:
-	case FM2_DTSEC2:
-	case FM2_DTSEC3:
-	case FM2_DTSEC4:
-		if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1))
-			return PHY_INTERFACE_MODE_SGMII;
-		break;
-	default:
-		return PHY_INTERFACE_MODE_NONE;
-	}
-
-	return PHY_INTERFACE_MODE_NONE;
-}
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 1d75a82bc3d..0d46c963128 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -211,6 +211,95 @@ static int fsl_pci_setup_inbound_windows(struct pci_controller *hose,
 	return 1;
 }
 
+#ifdef CONFIG_FSL_CORENET
+static void fsl_pcie_boot_master(pit_t *pi)
+{
+	/* configure inbound window for slave's u-boot image */
+	debug("PCIEBOOT - MASTER: Inbound window for slave's image; "
+			"Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n",
+			(u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
+			(u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1,
+			CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
+	struct pci_region r_inbound;
+	u32 sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE)
+					- 1;
+	pci_set_region(&r_inbound,
+		CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1,
+		CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
+		sz_inbound,
+		PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+	set_inbound_window(pi--, &r_inbound,
+		CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
+
+	/* configure inbound window for slave's u-boot image */
+	debug("PCIEBOOT - MASTER: Inbound window for slave's image; "
+			"Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n",
+			(u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
+			(u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2,
+			CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
+	pci_set_region(&r_inbound,
+		CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2,
+		CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
+		sz_inbound,
+		PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+	set_inbound_window(pi--, &r_inbound,
+		CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
+
+	/* configure inbound window for slave's ucode and ENV */
+	debug("PCIEBOOT - MASTER: Inbound window for slave's "
+			"ucode and ENV; "
+			"Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n",
+			(u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS,
+			(u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS,
+			CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE);
+	sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE)
+				- 1;
+	pci_set_region(&r_inbound,
+		CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS,
+		CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS,
+		sz_inbound,
+		PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+	set_inbound_window(pi--, &r_inbound,
+		CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE);
+}
+
+static void fsl_pcie_boot_master_release_slave(int port)
+{
+	unsigned long release_addr;
+
+	/* now release slave's core 0 */
+	switch (port) {
+	case 1:
+		release_addr = CONFIG_SYS_PCIE1_MEM_VIRT
+			+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
+		break;
+	case 2:
+		release_addr = CONFIG_SYS_PCIE2_MEM_VIRT
+			+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
+		break;
+	case 3:
+		release_addr = CONFIG_SYS_PCIE3_MEM_VIRT
+			+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
+		break;
+	default:
+		release_addr = 0;
+		break;
+	}
+	if (release_addr != 0) {
+		out_be32((void *)release_addr,
+			CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK);
+		debug("PCIEBOOT - MASTER: "
+			"Release slave successfully! Now the slave should start up!\n");
+	} else {
+		debug("PCIEBOOT - MASTER: "
+			"Release slave failed!\n");
+	}
+}
+#endif
+
 void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
 {
 	u32 cfg_addr = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_addr;
@@ -295,8 +384,25 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
 	/* see if we are a PCIe or PCI controller */
 	pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
 
+#ifdef CONFIG_FSL_CORENET
+	/* boot from PCIE --master */
+	char *s = getenv("bootmaster");
+	char pcie[6];
+	sprintf(pcie, "PCIE%d", pci_info->pci_num);
+
+	if (s && (strcmp(s, pcie) == 0)) {
+		debug("PCIEBOOT - MASTER: Master port [ %d ] for pcie boot.\n",
+				pci_info->pci_num);
+		fsl_pcie_boot_master((pit_t *)pi);
+	} else {
+		/* inbound */
+		inbound = fsl_pci_setup_inbound_windows(hose,
+					out_lo, pcie_cap, pi);
+	}
+#else
 	/* inbound */
 	inbound = fsl_pci_setup_inbound_windows(hose, out_lo, pcie_cap, pi);
+#endif
 
 	for (r = 0; r < hose->region_count; r++)
 		debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n", r,
@@ -488,6 +594,16 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info,
 	if (fsl_is_pci_agent(hose)) {
 		fsl_pci_config_unlock(hose);
 		hose->last_busno = hose->first_busno;
+#ifdef CONFIG_FSL_CORENET
+	} else {
+		/* boot from PCIE --master releases slave's core 0 */
+		char *s = getenv("bootmaster");
+		char pcie[6];
+		sprintf(pcie, "PCIE%d", pci_info->pci_num);
+
+		if (s && (strcmp(s, pcie) == 0))
+			fsl_pcie_boot_master_release_slave(pci_info->pci_num);
+#endif
 	}
 
 	pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 216c8982be2..e6ae709db78 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -580,8 +580,7 @@ static void phy_change(struct eth_device *dev)
 {
 	uec_private_t	*uec = (uec_private_t *)dev->priv;
 
-#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-    defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 	/* QE9 and QE12 need to be set for enabling QE MII managment signals */
@@ -592,8 +591,7 @@ static void phy_change(struct eth_device *dev)
 	/* Update the link, speed, duplex */
 	uec->mii_info->phyinfo->read_status(uec->mii_info);
 
-#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-    defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 	/*
 	 * QE12 is muxed with LBCTL, it needs to be released for enabling
 	 * LBCTL signal for LBC usage.
@@ -1208,16 +1206,14 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
 	uec_private_t		*uec;
 	int			err, i;
 	struct phy_info         *curphy;
-#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-    defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif
 
 	uec = (uec_private_t *)dev->priv;
 
 	if (uec->the_first_run == 0) {
-#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-    defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 	/* QE9 and QE12 need to be set for enabling QE MII managment signals */
 	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
 	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
@@ -1249,8 +1245,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
 			udelay(100000);
 		} while (1);
 
-#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
-    defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 		/* QE12 needs to be released for enabling LBCTL signal*/
 		clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
 #endif
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 1c0eb740175..31696655bbe 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -22,7 +22,7 @@
 
 /*
  * P2041 RDB board configuration file
- *
+ * Also supports P2040 RDB
  */
 #ifndef __CONFIG_H
 #define __CONFIG_H
@@ -36,6 +36,15 @@
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
 #endif
 
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+/* Set 1M boot space */
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
+		(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CONFIG_SYS_NO_FLASH
+#endif
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE
 #define CONFIG_E500			/* BOOKE e500 family */
@@ -73,7 +82,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_SYS_NO_FLASH
-#ifndef CONFIG_RAMBOOT_PBL
+#if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 #define CONFIG_ENV_IS_NOWHERE
 #endif
 #else
@@ -104,8 +113,12 @@
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE			CONFIG_SYS_NAND_BLOCK_SIZE
 #define CONFIG_ENV_OFFSET		(5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+#define CONFIG_ENV_IS_IN_REMOTE
+#define CONFIG_ENV_ADDR		0xffe20000
+#define CONFIG_ENV_SIZE		0x2000
 #elif defined(CONFIG_ENV_IS_NOWHERE)
-	#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SIZE		0x2000
 #else
 	#define CONFIG_ENV_IS_IN_FLASH
 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE \
@@ -374,6 +387,35 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_SRIO2_MEM_SIZE	0x10000000	/* 256M */
 
 /*
+ * for slave u-boot IMAGE instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000	/* 512K */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
+/*
+ * for slave UCODE and ENV instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000	/* 256K */
+
+/* slave core release by master*/
+#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
+
+/*
+ * SRIO_PCIE_BOOT - SLAVE
+ */
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
+		(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
+#endif
+
+/*
  * eSPI - Enhanced SPI
  */
 #define CONFIG_FSL_ESPI
@@ -485,6 +527,16 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	(6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+/*
+ * Slave has no ucode locally, it can fetch this from remote. When implementing
+ * in two corenet boards, slave's ucode could be stored in master's memory
+ * space, the address can be mapped from slave TLB->slave LAW->
+ * slave SRIO or PCIE outbound window->master inbound window->
+ * master LAW->the ucode address in master's memory space.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	0xFFE00000
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	0xEF000000
diff --git a/include/configs/P3060QDS.h b/include/configs/P3060QDS.h
deleted file mode 100644
index 8006547000d..00000000000
--- a/include/configs/P3060QDS.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * P3060 QDS board configuration file
- */
-#define CONFIG_P3060QDS
-#define CONFIG_PHYS_64BIT
-#define CONFIG_PPC_P3060
-#define CONFIG_FSL_QIXIS
-
-#define CONFIG_NAND_FSL_ELBC
-
-#define CONFIG_ICS307_REFCLK_HZ	25000000  /* ICS307 ref clk freq */
-
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_EON
-#define CONFIG_SPI_FLASH_SST
-
-#include "corenet_ds.h"
-
-#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
-#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
-#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
-#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
-
-/* There is a PCA9547 8-channel I2C-bus multiplexer on P3060QDS board */
-#define CONFIG_I2C_MUX
-#define CONFIG_I2C_MULTI_BUS
diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h
index 4a2e47513d6..d6f2f5ceb89 100644
--- a/include/configs/P4080DS.h
+++ b/include/configs/P4080DS.h
@@ -22,6 +22,7 @@
 
 /*
  * P4080 DS board configuration file
+ * Also supports P4040 DS
  */
 #define CONFIG_P4080DS
 #define CONFIG_PHYS_64BIT
diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h
index 4afc4f16ed1..8625f762902 100644
--- a/include/configs/P5020DS.h
+++ b/include/configs/P5020DS.h
@@ -22,7 +22,7 @@
 
 /*
  * P5020 DS board configuration file
- *
+ * Also supports P5010 DS
  */
 #define CONFIG_P5020DS
 #define CONFIG_PHYS_64BIT
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index f8f7a82aa96..f4f9bd12a4c 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -31,13 +31,21 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
+#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg
+#if defined(CONFIG_P3041DS)
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p3041ds.cfg
+#elif defined(CONFIG_P4080DS)
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg
+#elif defined(CONFIG_P5020DS)
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg
+#endif
 #endif
 
-#ifdef CONFIG_SRIOBOOT_SLAVE
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 /* Set 1M boot space */
-#define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
-#define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS \
-		(0x300000000ull | CONFIG_SYS_SRIOBOOT_SLAVE_ADDR)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
+		(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 #define CONFIG_SYS_NO_FLASH
 #endif
@@ -77,7 +85,7 @@
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_SYS_NO_FLASH
-#if !defined(CONFIG_SRIOBOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
+#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
 #define CONFIG_ENV_IS_NOWHERE
 #endif
 #else
@@ -108,7 +116,7 @@
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE			CONFIG_SYS_NAND_BLOCK_SIZE
 #define CONFIG_ENV_OFFSET		(5 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#elif defined(CONFIG_SRIOBOOT_SLAVE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 #define CONFIG_ENV_IS_IN_REMOTE
 #define CONFIG_ENV_ADDR		0xffe20000
 #define CONFIG_ENV_SIZE		0x2000
@@ -186,11 +194,7 @@
 #define CONFIG_DDR_SPD
 #define CONFIG_FSL_DDR3
 
-#ifdef CONFIG_P3060QDS
-#define CONFIG_SYS_SPD_BUS_NUM	0
-#else
 #define CONFIG_SYS_SPD_BUS_NUM	1
-#endif
 #define SPD_EEPROM_ADDRESS1	0x51
 #define SPD_EEPROM_ADDRESS2	0x52
 #define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1	/* for p3041/p5010 */
@@ -389,51 +393,32 @@
 #define CONFIG_SYS_SRIO2_MEM_SIZE	0x10000000	/* 256M */
 
 /*
- * SRIOBOOT - MASTER
- */
-#ifdef CONFIG_SRIOBOOT_MASTER
-/* master port for srioboot*/
-#define CONFIG_SRIOBOOT_MASTER_PORT 0
-/* #define CONFIG_SRIOBOOT_MASTER_PORT 1 */
-/*
  * for slave u-boot IMAGE instored in master memory space,
  * PHYS must be aligned based on the SIZE
  */
-#define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 0xfef080000ull
-#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 0xfff80000ull
-#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE 0x80000	/* 512K */
-#define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 0xfef080000ull
-#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 0x3fff80000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000	/* 512K */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
 /*
- * for slave UCODE instored in master memory space,
+ * for slave UCODE and ENV instored in master memory space,
  * PHYS must be aligned based on the SIZE
  */
-#define CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS 0xfef020000ull
-#define CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS 0x3ffe00000ull
-#define CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE 0x10000	/* 64K */
-/*
- * for slave ENV instored in master memory space,
- * PHYS must be aligned based on the SIZE
- */
-#define CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS 0xfef060000ull
-#define CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS 0x3ffe20000ull
-#define CONFIG_SRIOBOOT_SLAVE_ENV_SIZE 0x20000	/* 128K */
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000	/* 256K */
+
 /* slave core release by master*/
-#define CONFIG_SRIOBOOT_SLAVE_HOLDOFF
-#define CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET 0xe00e4
-#define CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK 0x00000001 /* release core 0 */
-#endif
+#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 
 /*
- * SRIOBOOT - SLAVE
+ * SRIO_PCIE_BOOT - SLAVE
  */
-#ifdef CONFIG_SRIOBOOT_SLAVE
-/* slave port for srioboot */
-#define CONFIG_SRIOBOOT_SLAVE_PORT0
-/* #define CONFIG_SRIOBOOT_SLAVE_PORT1 */
-#define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR 0xFFE00000
-#define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS \
-		(0x300000000ull | CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR)
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
+		(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 #endif
 
 /*
@@ -556,13 +541,13 @@
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	(6 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#elif defined(CONFIG_SRIOBOOT_SLAVE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 /*
  * Slave has no ucode locally, it can fetch this from remote. When implementing
  * in two corenet boards, slave's ucode could be stored in master's memory
  * space, the address can be mapped from slave TLB->slave LAW->
- * slave SRIO outbound window->master inbound window->master LAW->
- * the ucode address in master's NOR flash.
+ * slave SRIO or PCIE outbound window->master inbound window->
+ * master LAW->the ucode address in master's memory space.
  */
 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 #define CONFIG_SYS_QE_FMAN_FW_ADDR	0xFFE00000
@@ -724,7 +709,7 @@
 
 #define CONFIG_BAUDRATE	115200
 
-#if defined(CONFIG_P4080DS) || defined(CONFIG_P3060QDS)
+#ifdef CONFIG_P4080DS
 #define __USB_PHY_TYPE	ulpi
 #else
 #define __USB_PHY_TYPE	utmi
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index a8882d49da4..b18f4a0ec55 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -31,7 +31,7 @@
 #endif
 
 #if defined(CONFIG_P1020MBG)
-#define CONFIG_BOARDNAME "P1020MBG"
+#define CONFIG_BOARDNAME "P1020MBG-PC"
 #define CONFIG_P1020
 #define CONFIG_VSC7385_ENET
 #define CONFIG_SLIC
@@ -41,7 +41,7 @@
 #endif
 
 #if defined(CONFIG_P1020UTM)
-#define CONFIG_BOARDNAME "P1020UTM"
+#define CONFIG_BOARDNAME "P1020UTM-PC"
 #define CONFIG_P1020
 #define __SW_BOOT_MASK		0x03
 #define __SW_BOOT_NOR		0xe0
@@ -49,7 +49,7 @@
 #endif
 
 #if defined(CONFIG_P1020RDB)
-#define CONFIG_BOARDNAME "P1020RDB"
+#define CONFIG_BOARDNAME "P1020RDB-PC"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1020
 #define CONFIG_SPI_FLASH
@@ -64,7 +64,7 @@
 #endif
 
 #if defined(CONFIG_P1021RDB)
-#define CONFIG_BOARDNAME "P1021RDB"
+#define CONFIG_BOARDNAME "P1021RDB-PC"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1021
 #define CONFIG_QE
@@ -111,7 +111,7 @@
 #endif
 
 #if defined(CONFIG_P2020RDB)
-#define CONFIG_BOARDNAME "P2020RDB"
+#define CONFIG_BOARDNAME "P2020RDB-PCA"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P2020
 #define CONFIG_SPI_FLASH
diff --git a/include/ddr_spd.h b/include/ddr_spd.h
index a9230b9108e..9e74d8729e2 100644
--- a/include/ddr_spd.h
+++ b/include/ddr_spd.h
@@ -221,7 +221,12 @@ typedef struct ddr3_spd_eeprom_s {
 	unsigned char therm_ref_opt;   /* 31 SDRAM Thermal and Refresh Opts */
 	unsigned char therm_sensor;    /* 32 Module Thermal Sensor */
 	unsigned char device_type;     /* 33 SDRAM device type */
-	unsigned char res_34_59[26];   /* 34-59 Reserved, General Section */
+	int8_t fine_tCK_min;	       /* 34 Fine offset for tCKmin */
+	int8_t fine_tAA_min;	       /* 35 Fine offset for tAAmin */
+	int8_t fine_tRCD_min;	       /* 36 Fine offset for tRCDmin */
+	int8_t fine_tRP_min;	       /* 37 Fine offset for tRPmin */
+	int8_t fine_tRC_min;	       /* 38 Fine offset for tRCmin */
+	unsigned char res_39_59[21];   /* 39-59 Reserved, General Section */
 
 	/* Module-Specific Section: Bytes 60-116 */
 	union {
diff --git a/include/fm_eth.h b/include/fm_eth.h
index c7c68820d57..e56541df1b7 100644
--- a/include/fm_eth.h
+++ b/include/fm_eth.h
@@ -35,6 +35,7 @@ enum fm_port {
 	FM2_DTSEC2,
 	FM2_DTSEC3,
 	FM2_DTSEC4,
+	FM2_DTSEC5,
 	FM2_10GEC1,
 	NUM_FM_PORTS,
 };
@@ -109,6 +110,7 @@ void fman_enet_init(void);
 void fdt_fixup_fman_ethernet(void *fdt);
 phy_interface_t fm_info_get_enet_if(enum fm_port port);
 void fm_info_set_phy_address(enum fm_port port, int address);
+int fm_info_get_phy_address(enum fm_port port);
 void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus);
 void fm_disable_port(enum fm_port port);
 
diff --git a/include/image.h b/include/image.h
index aa9daa2debd..e5f6649291e 100644
--- a/include/image.h
+++ b/include/image.h
@@ -164,6 +164,7 @@
 #define IH_TYPE_OMAPIMAGE	12	/* TI OMAP Config Header Image	*/
 #define IH_TYPE_AISIMAGE	13	/* TI Davinci AIS Image		*/
 #define IH_TYPE_KERNEL_NOLOAD	14	/* OS Kernel Image, can run from any load address */
+#define IH_TYPE_PBLIMAGE	15	/* Freescale PBL Boot Image	*/
 
 /*
  * Compression Types
diff --git a/nand_spl/board/freescale/common.c b/nand_spl/board/freescale/common.c
new file mode 100644
index 00000000000..0e099bc7c67
--- /dev/null
+++ b/nand_spl/board/freescale/common.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Author: Matthew McClintock <msm@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_FSL_TBCLK_DIV
+#define CONFIG_SYS_FSL_TBCLK_DIV 8
+#endif
+
+void udelay(unsigned long usec)
+{
+	u32 ticks_per_usec = gd->bus_clk / (CONFIG_SYS_FSL_TBCLK_DIV * 1000000);
+	u32 ticks = ticks_per_usec * usec;
+	u32 s = mfspr(SPRN_TBRL);
+
+	while ((mfspr(SPRN_TBRL) - s) < ticks);
+}
diff --git a/nand_spl/board/freescale/p1010rdb/Makefile b/nand_spl/board/freescale/p1010rdb/Makefile
index 8d240eadd97..cdbd49292cb 100644
--- a/nand_spl/board/freescale/p1010rdb/Makefile
+++ b/nand_spl/board/freescale/p1010rdb/Makefile
@@ -39,7 +39,8 @@ CFLAGS	+= -DCONFIG_NAND_SPL
 
 SOBJS	= start.o resetvec.o ticks.o
 COBJS	= cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
-	  nand_boot.o nand_boot_fsl_ifc.o ns16550.o tlb.o tlb_table.o
+	  nand_boot.o nand_boot_fsl_ifc.o ns16550.o tlb.o tlb_table.o \
+	  ../common.o
 
 SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -123,6 +124,9 @@ ifneq ($(OBJTREE), $(SRCTREE))
 $(obj)nand_boot.c:
 	@rm -f $(obj)nand_boot.c
 	ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+$(obj)../common.c:
+	@rm -f $(obj)../common.c
+	ln -s $(SRCTREE)/nand_spl/board/freescale/common.c $(obj)../common.c
 endif
 
 #########################################################################
diff --git a/nand_spl/board/freescale/p1010rdb/nand_boot.c b/nand_spl/board/freescale/p1010rdb/nand_boot.c
index 16eeb61d85b..9c356901b13 100644
--- a/nand_spl/board/freescale/p1010rdb/nand_boot.c
+++ b/nand_spl/board/freescale/p1010rdb/nand_boot.c
@@ -27,51 +27,61 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_law.h>
+#include <asm/global_data.h>
 
-#define udelay(x) { int j; for (j = 0; j < x * 10000; j++) isync(); }
+DECLARE_GLOBAL_DATA_PTR;
 
 unsigned long ddr_freq_mhz;
 
 void sdram_init(void)
 {
 	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+	/* mask off E bit */
+	u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR));
 
-	out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL | SDRAM_CFG_32_BE);
-	out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
-	out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
-	out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL_2);
-	out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
+	__raw_writel(CONFIG_SYS_DDR_CONTROL | SDRAM_CFG_32_BE, &ddr->sdram_cfg);
+	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
+	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
+	__raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
+	__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
 
 	if (ddr_freq_mhz < 700) {
-		out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3_667);
-		out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0_667);
-		out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1_667);
-		out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2_667);
-		out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1_667);
-		out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2_667);
-		out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL_667);
-		out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL_667);
-		out_be32(&ddr->ddr_wrlvl_cntl,
-				CONFIG_SYS_DDR_WRLVL_CONTROL_667);
+		__raw_writel(CONFIG_SYS_DDR_TIMING_3_667, &ddr->timing_cfg_3);
+		__raw_writel(CONFIG_SYS_DDR_TIMING_0_667, &ddr->timing_cfg_0);
+		__raw_writel(CONFIG_SYS_DDR_TIMING_1_667, &ddr->timing_cfg_1);
+		__raw_writel(CONFIG_SYS_DDR_TIMING_2_667, &ddr->timing_cfg_2);
+		__raw_writel(CONFIG_SYS_DDR_MODE_1_667, &ddr->sdram_mode);
+		__raw_writel(CONFIG_SYS_DDR_MODE_2_667, &ddr->sdram_mode_2);
+		__raw_writel(CONFIG_SYS_DDR_INTERVAL_667, &ddr->sdram_interval);
+		__raw_writel(CONFIG_SYS_DDR_CLK_CTRL_667, &ddr->sdram_clk_cntl);
+		__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_667, &ddr->ddr_wrlvl_cntl);
 	} else {
-		out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3_800);
-		out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0_800);
-		out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1_800);
-		out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2_800);
-		out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1_800);
-		out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2_800);
-		out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL_800);
-		out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL_800);
-		out_be32(&ddr->ddr_wrlvl_cntl,
-				CONFIG_SYS_DDR_WRLVL_CONTROL_800);
+		__raw_writel(CONFIG_SYS_DDR_TIMING_3_800, &ddr->timing_cfg_3);
+		__raw_writel(CONFIG_SYS_DDR_TIMING_0_800, &ddr->timing_cfg_0);
+		__raw_writel(CONFIG_SYS_DDR_TIMING_1_800, &ddr->timing_cfg_1);
+		__raw_writel(CONFIG_SYS_DDR_TIMING_2_800, &ddr->timing_cfg_2);
+		__raw_writel(CONFIG_SYS_DDR_MODE_1_800, &ddr->sdram_mode);
+		__raw_writel(CONFIG_SYS_DDR_MODE_2_800, &ddr->sdram_mode_2);
+		__raw_writel(CONFIG_SYS_DDR_INTERVAL_800, &ddr->sdram_interval);
+		__raw_writel(CONFIG_SYS_DDR_CLK_CTRL_800, &ddr->sdram_clk_cntl);
+		__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_800, &ddr->ddr_wrlvl_cntl);
 	}
 
-	out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
-	out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
-	out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CONTROL);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
+	__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
+
+	/* P1014 and it's derivatives support max 16bit DDR width */
+	if (svr == SVR_P1014) {
+		__raw_writel(ddr->sdram_cfg & ~SDRAM_CFG_DBW_MASK, &ddr->sdram_cfg);
+		__raw_writel(ddr->sdram_cfg | SDRAM_CFG_16_BE, &ddr->sdram_cfg);
+		/* For CS0_BNDS we divide the start and end address by 2, so we can just
+		 * shift the entire register to achieve the desired result and the mask
+		 * the value so we don't write reserved fields */
+		__raw_writel((CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff, &ddr->cs0_bnds);
+	}
 
-	/* mimic 500us delay, with busy isync() loop */
-	udelay(100);
+	udelay(500);
 
 	/* Let the controller go */
 	out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
@@ -82,20 +92,19 @@ void sdram_init(void)
 void board_init_f(ulong bootflag)
 {
 	u32 plat_ratio, ddr_ratio;
-	unsigned long bus_clk;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 
 	/* initialize selected port with appropriate baud rate */
 	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
 	plat_ratio >>= 1;
-	bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
 
 	ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
 	ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 	ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000;
 
 	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-			bus_clk / 16 / CONFIG_BAUDRATE);
+			gd->bus_clk / 16 / CONFIG_BAUDRATE);
 
 	puts("\nNAND boot... ");
 
diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile
index 168e8686413..da435213fcf 100644
--- a/nand_spl/board/freescale/p1023rds/Makefile
+++ b/nand_spl/board/freescale/p1023rds/Makefile
@@ -34,7 +34,8 @@ CFLAGS	+= -DCONFIG_NAND_SPL
 
 SOBJS	= start.o resetvec.o
 COBJS	= cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
-	  nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
+	  nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o \
+	  ../common.o
 
 SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -114,6 +115,9 @@ ifneq ($(OBJTREE), $(SRCTREE))
 $(obj)nand_boot.c:
 	@rm -f $(obj)nand_boot.c
 	ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+$(obj)../common.c:
+	@rm -f $(obj)../common.c
+	ln -s $(SRCTREE)/nand_spl/board/freescale/common.c $(obj)../common.c
 endif
 
 #########################################################################
diff --git a/nand_spl/board/freescale/p1023rds/nand_boot.c b/nand_spl/board/freescale/p1023rds/nand_boot.c
index 0065c876ded..89e339d5120 100644
--- a/nand_spl/board/freescale/p1023rds/nand_boot.c
+++ b/nand_spl/board/freescale/p1023rds/nand_boot.c
@@ -25,6 +25,10 @@
 #include <asm/io.h>
 #include <nand.h>
 #include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
 
 /* Fixed sdram init -- doesn't use serial presence detect. */
 void sdram_init(void)
@@ -33,40 +37,47 @@ void sdram_init(void)
 
 	set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1);
 
-	out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
-	out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
-	out_be32(&ddr->cs1_bnds, CONFIG_SYS_DDR_CS1_BNDS);
-	out_be32(&ddr->cs1_config, CONFIG_SYS_DDR_CS1_CONFIG);
-	out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
-	out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
-	out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
-	out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
-	out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL2);
-	out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1);
-	out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2);
-	out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL);
-	out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
-	out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL);
-	out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
-	out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
-	out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL);
-	out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL);
-	out_be32(&ddr->ddr_cdr1, CONFIG_SYS_DDR_CDR_1);
-	out_be32(&ddr->ddr_cdr2, CONFIG_SYS_DDR_CDR_2);
-	out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
+	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
+	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
+	__raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
+	__raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);
+	__raw_writel(CONFIG_SYS_DDR_CONTROL2, &ddr->sdram_cfg_2);
+	__raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
+	__raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);
+	__raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
+	__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
+	__raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
+	__raw_writel(CONFIG_SYS_DDR_ZQ_CNTL, &ddr->ddr_zq_cntl);
+	__raw_writel(CONFIG_SYS_DDR_WRLVL_CNTL, &ddr->ddr_wrlvl_cntl);
+	__raw_writel(CONFIG_SYS_DDR_CDR_1, &ddr->ddr_cdr1);
+	__raw_writel(CONFIG_SYS_DDR_CDR_2, &ddr->ddr_cdr2);
+	/* Set, but do not enable the memory */
+	__raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg);
+
+	asm volatile("sync;isync");
+	udelay(500);
+
+	/* Let the controller go */
+	out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
 }
 
 void board_init_f(ulong bootflag)
 {
-	u32 plat_ratio, bus_clk;
+	u32 plat_ratio;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 
 	/* initialize selected port with appropriate baud rate */
 	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
 	plat_ratio >>= 1;
-	bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
 	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-			bus_clk / 16 / CONFIG_BAUDRATE);
+			gd->bus_clk / 16 / CONFIG_BAUDRATE);
 
 	puts("\nNAND boot... ");
 	/* Initialize the DDR3 */
diff --git a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
index 475cc496b3d..46cf7099b6e 100644
--- a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
+++ b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
@@ -39,7 +39,8 @@ CFLAGS	+= -DCONFIG_NAND_SPL
 
 SOBJS	= start.o resetvec.o
 COBJS	= cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
-	  nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
+	  nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o \
+	  ../common.o
 
 SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -119,6 +120,9 @@ ifneq ($(OBJTREE), $(SRCTREE))
 $(obj)nand_boot.c:
 	@rm -f $(obj)nand_boot.c
 	ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+$(obj)../common.c:
+	@rm -f $(obj)../common.c
+	ln -s $(SRCTREE)/nand_spl/board/freescale/common.c $(obj)../common.c
 endif
 
 #########################################################################
diff --git a/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c b/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
index b9796ea6c94..4c140c1572f 100644
--- a/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
+++ b/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
@@ -25,11 +25,9 @@
 #include <nand.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/global_data.h>
 
-#define udelay(x) {int i, j; \
-			for (i = 0; i < x; i++) \
-				for (j = 0; j < 10000; j++) \
-					; }
+DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
@@ -38,32 +36,32 @@ void sdram_init(void)
 {
 	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
 
-	out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
-	out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
+	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
+	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
 #if CONFIG_CHIP_SELECTS_PER_CTRL > 1
-	out_be32(&ddr->cs1_bnds, CONFIG_SYS_DDR_CS1_BNDS);
-	out_be32(&ddr->cs1_config, CONFIG_SYS_DDR_CS1_CONFIG);
+	__raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
+	__raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
 #endif
-	out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
-	out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
-	out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
-	out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);
 
-	out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL_2);
-	out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1);
-	out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2);
+	__raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
+	__raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
+	__raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);
 
-	out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL);
-	out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
-	out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL);
+	__raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
+	__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
+	__raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);
 
-	out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
-	out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
-	out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CONTROL);
-	out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CONTROL);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
+	__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
+	__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl);
 
 	/* Set, but do not enable the memory */
-	out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN);
+	__raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg);
 
 	asm volatile("sync;isync");
 	udelay(500);
@@ -76,7 +74,7 @@ void sdram_init(void)
 
 void board_init_f(ulong bootflag)
 {
-	u32 plat_ratio, bus_clk;
+	u32 plat_ratio;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 #ifndef CONFIG_QE
 	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
@@ -85,22 +83,22 @@ void board_init_f(ulong bootflag)
 	/* initialize selected port with appropriate baud rate */
 	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
 	plat_ratio >>= 1;
-	bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
 
 	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-			bus_clk / 16 / CONFIG_BAUDRATE);
+			gd->bus_clk / 16 / CONFIG_BAUDRATE);
 
 	puts("\nNAND boot... ");
 
 #ifndef CONFIG_QE
 	/* init DDR3 reset signal */
-	out_be32(&pgpio->gpdir, 0x02000000);
-	out_be32(&pgpio->gpodr, 0x00200000);
-	out_be32(&pgpio->gpdat, 0x00000000);
+	__raw_writel(0x02000000, &pgpio->gpdir);
+	__raw_writel(0x00200000, &pgpio->gpodr);
+	__raw_writel(0x00000000, &pgpio->gpdat);
 	udelay(1000);
-	out_be32(&pgpio->gpdat, 0x00200000);
+	__raw_writel(0x00200000, &pgpio->gpdat);
 	udelay(1000);
-	out_be32(&pgpio->gpdir, 0x00000000);
+	__raw_writel(0x00000000, &pgpio->gpdir);
 #endif
 
 	/* Initialize the DDR3 */
diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c
index 502605b1d5c..e9d649743ee 100644
--- a/nand_spl/nand_boot_fsl_elbc.c
+++ b/nand_spl/nand_boot_fsl_elbc.c
@@ -66,39 +66,42 @@ static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
 
 	if (large) {
 		fmr |= FMR_ECCM;
-		out_be32(&regs->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
-		                     (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
-		out_be32(&regs->fir,
-		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
-		         (FIR_OP_CA  << FIR_OP1_SHIFT) |
-		         (FIR_OP_PA  << FIR_OP2_SHIFT) |
-		         (FIR_OP_CW1 << FIR_OP3_SHIFT) |
-		         (FIR_OP_RBW << FIR_OP4_SHIFT));
+		__raw_writel((NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
+			(NAND_CMD_READSTART << FCR_CMD1_SHIFT),
+			&regs->fcr);
+		__raw_writel(
+			(FIR_OP_CW0 << FIR_OP0_SHIFT) |
+			(FIR_OP_CA  << FIR_OP1_SHIFT) |
+			(FIR_OP_PA  << FIR_OP2_SHIFT) |
+			(FIR_OP_CW1 << FIR_OP3_SHIFT) |
+			(FIR_OP_RBW << FIR_OP4_SHIFT),
+			&regs->fir);
 	} else {
-		out_be32(&regs->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT);
-		out_be32(&regs->fir,
-		         (FIR_OP_CW0 << FIR_OP0_SHIFT) |
-		         (FIR_OP_CA  << FIR_OP1_SHIFT) |
-		         (FIR_OP_PA  << FIR_OP2_SHIFT) |
-		         (FIR_OP_RBW << FIR_OP3_SHIFT));
+		__raw_writel(NAND_CMD_READ0 << FCR_CMD0_SHIFT, &regs->fcr);
+		__raw_writel(
+			(FIR_OP_CW0 << FIR_OP0_SHIFT) |
+			(FIR_OP_CA  << FIR_OP1_SHIFT) |
+			(FIR_OP_PA  << FIR_OP2_SHIFT) |
+			(FIR_OP_RBW << FIR_OP3_SHIFT),
+			&regs->fir);
 	}
 
-	out_be32(&regs->fbcr, 0);
-	clrsetbits_be32(&regs->bank[0].br, BR_DECC, BR_DECC_CHK_GEN);
+	__raw_writel(0, &regs->fbcr);
 
 	while (pos < uboot_size) {
 		int i = 0;
-		out_be32(&regs->fbar, offs >> block_shift);
+		__raw_writel(offs >> block_shift, &regs->fbar);
 
 		do {
 			int j;
 			unsigned int page_offs = (offs & (block_size - 1)) << 1;
 
-			out_be32(&regs->ltesr, ~0);
-			out_be32(&regs->lteatr, 0);
-			out_be32(&regs->fpar, page_offs);
-			out_be32(&regs->fmr, fmr);
-			out_be32(&regs->lsor, 0);
+			__raw_writel(~0, &regs->ltesr);
+			__raw_writel(0, &regs->lteatr);
+			__raw_writel(page_offs, &regs->fpar);
+			__raw_writel(fmr, &regs->fmr);
+			sync();
+			__raw_writel(0, &regs->lsor);
 			nand_wait();
 
 			page_offs %= WINDOW_SIZE;
diff --git a/tools/Makefile b/tools/Makefile
index a7d1e18fe2a..c31437e6a20 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -92,6 +92,7 @@ OBJ_FILES-$(CONFIG_CMD_LOADS) += img2srec.o
 OBJ_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes.o
 NOPED_OBJ_FILES-y += aisimage.o
 NOPED_OBJ_FILES-y += kwbimage.o
+NOPED_OBJ_FILES-y += pblimage.o
 NOPED_OBJ_FILES-y += imximage.o
 NOPED_OBJ_FILES-y += omapimage.o
 NOPED_OBJ_FILES-y += mkenvimage.o
@@ -208,6 +209,7 @@ $(obj)mkimage$(SFX):	$(obj)aisimage.o \
 			$(obj)image.o \
 			$(obj)imximage.o \
 			$(obj)kwbimage.o \
+			$(obj)pblimage.o \
 			$(obj)md5.o \
 			$(obj)mkimage.o \
 			$(obj)os_support.o \
diff --git a/tools/mkimage.c b/tools/mkimage.c
index eeb1b106682..e43b09f7661 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -39,6 +39,7 @@ struct mkimage_params params = {
 	.comp = IH_COMP_GZIP,
 	.dtc = MKIMAGE_DEFAULT_DTC_OPTIONS,
 	.imagename = "",
+	.imagename2 = "",
 };
 
 /*
@@ -150,6 +151,8 @@ main (int argc, char **argv)
 	int retval = 0;
 	struct image_type_params *tparams = NULL;
 
+	/* Init Freescale PBL Boot image generation/list support */
+	init_pbl_image_type();
 	/* Init Kirkwood Boot image generation/list support */
 	init_kwb_image_type ();
 	/* Init Freescale imx Boot image generation/list support */
@@ -250,6 +253,15 @@ main (int argc, char **argv)
 					usage ();
 				params.imagename = *++argv;
 				goto NXTARG;
+			case 'R':
+				if (--argc <= 0)
+					usage();
+				/*
+				 * This entry is for the second configuration
+				 * file, if only one is not enough.
+				 */
+				params.imagename2 = *++argv;
+				goto NXTARG;
 			case 's':
 				params.skipcpy = 1;
 				break;
@@ -440,6 +452,9 @@ NXTARG:		;
 					break;
 				}
 			}
+		} else if (params.type == IH_TYPE_PBLIMAGE) {
+			/* PBL has special Image format, implements its' own */
+			pbl_load_uboot(ifd, &params);
 		} else {
 			copy_file (ifd, params.datafile, 0);
 		}
diff --git a/tools/mkimage.h b/tools/mkimage.h
index 5fe1a48ccfe..ea45f5c8349 100644
--- a/tools/mkimage.h
+++ b/tools/mkimage.h
@@ -69,6 +69,7 @@ struct mkimage_params {
 	unsigned int addr;
 	unsigned int ep;
 	char *imagename;
+	char *imagename2;
 	char *datafile;
 	char *imagefile;
 	char *cmdname;
@@ -147,6 +148,8 @@ void mkimage_register (struct image_type_params *tparams);
  *
  * Supported image types init functions
  */
+void pbl_load_uboot(int fd, struct mkimage_params *mparams);
+void init_pbl_image_type(void);
 void init_ais_image_type(void);
 void init_kwb_image_type (void);
 void init_imx_image_type (void);
diff --git a/tools/pblimage.c b/tools/pblimage.c
new file mode 100644
index 00000000000..508a747a3f6
--- /dev/null
+++ b/tools/pblimage.c
@@ -0,0 +1,331 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#define _GNU_SOURCE
+
+#include "mkimage.h"
+#include <image.h>
+#include "pblimage.h"
+
+/*
+ * The PBL can load up to 64 bytes at a time, so we split the U-Boot
+ * image into 64 byte chunks. PBL needs a command for each piece, of
+ * the form "81xxxxxx", where "xxxxxx" is the offset. SYS_TEXT_BASE
+ * is 0xFFF80000 for PBL boot, and PBL only cares about low 24-bit,
+ * so it starts from 0x81F80000.
+ */
+static uint32_t next_pbl_cmd = 0x81F80000;
+/*
+ * need to store all bytes in memory for calculating crc32, then write the
+ * bytes to image file for PBL boot.
+ */
+static unsigned char mem_buf[600000];
+static unsigned char *pmem_buf = mem_buf;
+static int pbl_size;
+static char *fname = "Unknown";
+static int lineno = -1;
+static struct pbl_header pblimage_header;
+
+static union
+{
+	char c[4];
+	unsigned char l;
+} endian_test = { {'l', '?', '?', 'b'} };
+
+#define ENDIANNESS ((char)endian_test.l)
+
+static void generate_pbl_cmd(void)
+{
+	uint32_t val = next_pbl_cmd;
+	next_pbl_cmd += 0x40;
+	int i;
+
+	for (i = 3; i >= 0; i--) {
+		*pmem_buf++ = (val >> (i * 8)) & 0xff;
+		pbl_size++;
+	}
+}
+
+static void pbl_fget(size_t size, FILE *stream)
+{
+	unsigned char c;
+	int c_temp;
+
+	while (size && (c_temp = fgetc(stream)) != EOF) {
+		c = (unsigned char)c_temp;
+		*pmem_buf++ = c;
+		pbl_size++;
+		size--;
+	}
+}
+
+/* load split u-boot with PBI command 81xxxxxx. */
+static void load_uboot(FILE *fp_uboot)
+{
+	while (next_pbl_cmd < 0x82000000) {
+		generate_pbl_cmd();
+		pbl_fget(64, fp_uboot);
+	}
+}
+
+static void check_get_hexval(char *token)
+{
+	uint32_t hexval;
+	int i;
+
+	if (!sscanf(token, "%x", &hexval)) {
+		printf("Error:%s[%d] - Invalid hex data(%s)\n", fname,
+			lineno, token);
+		exit(EXIT_FAILURE);
+	}
+	for (i = 3; i >= 0; i--) {
+		*pmem_buf++ = (hexval >> (i * 8)) & 0xff;
+		pbl_size++;
+	}
+}
+
+static void pbl_parser(char *name)
+{
+	FILE *fd = NULL;
+	char *line = NULL;
+	char *token, *saveptr1, *saveptr2;
+	size_t len = 0;
+
+	fname = name;
+	fd = fopen(name, "r");
+	if (fd == NULL) {
+		printf("Error:%s - Can't open\n", fname);
+		exit(EXIT_FAILURE);
+	}
+
+	while ((getline(&line, &len, fd)) > 0) {
+		lineno++;
+		token = strtok_r(line, "\r\n", &saveptr1);
+		/* drop all lines with zero tokens (= empty lines) */
+		if (token == NULL)
+			continue;
+		for (line = token;; line = NULL) {
+			token = strtok_r(line, " \t", &saveptr2);
+			if (token == NULL)
+				break;
+			/* Drop all text starting with '#' as comments */
+			if (token[0] == '#')
+				break;
+			check_get_hexval(token);
+		}
+	}
+	if (line)
+		free(line);
+	fclose(fd);
+}
+
+static uint32_t crc_table[256];
+
+static void make_crc_table(void)
+{
+	uint32_t mask;
+	int i, j;
+	uint32_t poly; /* polynomial exclusive-or pattern */
+
+	/*
+	 * the polynomial used by PBL is 1 + x1 + x2 + x4 + x5 + x7 + x8 + x10
+	 * + x11 + x12 + x16 + x22 + x23 + x26 + x32.
+	 */
+	poly = 0x04c11db7;
+
+	for (i = 0; i < 256; i++) {
+		mask = i << 24;
+		for (j = 0; j < 8; j++) {
+			if (mask & 0x80000000)
+				mask = (mask << 1) ^ poly;
+			else
+				mask <<= 1;
+		}
+		crc_table[i] = mask;
+	}
+}
+
+unsigned long pbl_crc32(unsigned long crc, const char *buf, uint32_t len)
+{
+	uint32_t crc32_val = 0xffffffff;
+	uint32_t xor = 0x0;
+	int i;
+
+	make_crc_table();
+
+	for (i = 0; i < len; i++)
+		crc32_val = (crc32_val << 8) ^
+			crc_table[(crc32_val >> 24) ^ (*buf++ & 0xff)];
+
+	crc32_val = crc32_val ^ xor;
+	if (crc32_val < 0) {
+		crc32_val += 0xffffffff;
+		crc32_val += 1;
+	}
+	return crc32_val;
+}
+
+static uint32_t reverse_byte(uint32_t val)
+{
+	uint32_t temp;
+	unsigned char *p1;
+	int j;
+
+	temp = val;
+	p1 = (unsigned char *)&temp;
+	for (j = 3; j >= 0; j--)
+		*p1++ = (val >> (j * 8)) & 0xff;
+	return temp;
+}
+
+/* write end command and crc command to memory. */
+static void add_end_cmd(void)
+{
+	uint32_t pbl_end_cmd[4] = {0x09138000, 0x00000000,
+		0x091380c0, 0x00000000};
+	uint32_t crc32_pbl;
+	int i;
+	unsigned char *p = (unsigned char *)&pbl_end_cmd;
+
+	if (ENDIANNESS == 'l') {
+		for (i = 0; i < 4; i++)
+			pbl_end_cmd[i] = reverse_byte(pbl_end_cmd[i]);
+	}
+
+	for (i = 0; i < 16; i++) {
+		*pmem_buf++ = *p++;
+		pbl_size++;
+	}
+
+	/* Add PBI CRC command. */
+	*pmem_buf++ = 0x08;
+	*pmem_buf++ = 0x13;
+	*pmem_buf++ = 0x80;
+	*pmem_buf++ = 0x40;
+	pbl_size += 4;
+
+	/* calculated CRC32 and write it to memory. */
+	crc32_pbl = pbl_crc32(0, (const char *)mem_buf, pbl_size);
+	*pmem_buf++ = (crc32_pbl >> 24) & 0xff;
+	*pmem_buf++ = (crc32_pbl >> 16) & 0xff;
+	*pmem_buf++ = (crc32_pbl >> 8) & 0xff;
+	*pmem_buf++ = (crc32_pbl) & 0xff;
+	pbl_size += 4;
+
+	if ((pbl_size % 16) != 0) {
+		for (i = 0; i < 8; i++) {
+			*pmem_buf++ = 0x0;
+			pbl_size++;
+		}
+	}
+	if ((pbl_size % 16 != 0)) {
+		printf("Error: Bad size of image file\n");
+		exit(EXIT_FAILURE);
+	}
+}
+
+void pbl_load_uboot(int ifd, struct mkimage_params *params)
+{
+	FILE *fp_uboot;
+	int size;
+
+	/* parse the rcw.cfg file. */
+	pbl_parser(params->imagename);
+
+	/* parse the pbi.cfg file. */
+	pbl_parser(params->imagename2);
+
+	fp_uboot = fopen(params->datafile, "r");
+	if (fp_uboot == NULL) {
+		printf("Error: %s open failed\n", params->datafile);
+		exit(EXIT_FAILURE);
+	}
+
+	load_uboot(fp_uboot);
+	add_end_cmd();
+	fclose(fp_uboot);
+	lseek(ifd, 0, SEEK_SET);
+
+	size = pbl_size;
+	if (write(ifd, (const void *)&mem_buf, size) != size) {
+		fprintf(stderr, "Write error on %s: %s\n",
+			params->imagefile, strerror(errno));
+		exit(EXIT_FAILURE);
+	}
+}
+
+static int pblimage_check_image_types(uint8_t type)
+{
+	if (type == IH_TYPE_PBLIMAGE)
+		return EXIT_SUCCESS;
+	else
+		return EXIT_FAILURE;
+}
+
+static int pblimage_verify_header(unsigned char *ptr, int image_size,
+			struct mkimage_params *params)
+{
+	struct pbl_header *pbl_hdr = (struct pbl_header *) ptr;
+
+	/* Only a few checks can be done: search for magic numbers */
+	if (ENDIANNESS == 'l') {
+		if (pbl_hdr->preamble != reverse_byte(RCW_PREAMBLE))
+			return -FDT_ERR_BADSTRUCTURE;
+
+		if (pbl_hdr->rcwheader != reverse_byte(RCW_HEADER))
+			return -FDT_ERR_BADSTRUCTURE;
+	} else {
+		if (pbl_hdr->preamble != RCW_PREAMBLE)
+			return -FDT_ERR_BADSTRUCTURE;
+
+		if (pbl_hdr->rcwheader != RCW_HEADER)
+			return -FDT_ERR_BADSTRUCTURE;
+	}
+	return 0;
+}
+
+static void pblimage_print_header(const void *ptr)
+{
+	printf("Image Type:   Freescale PBL Boot Image\n");
+}
+
+static void pblimage_set_header(void *ptr, struct stat *sbuf, int ifd,
+				struct mkimage_params *params)
+{
+	/*nothing need to do, pbl_load_uboot takes care of whole file. */
+}
+
+/* pblimage parameters */
+static struct image_type_params pblimage_params = {
+	.name		= "Freescale PBL Boot Image support",
+	.header_size	= sizeof(struct pbl_header),
+	.hdr		= (void *)&pblimage_header,
+	.check_image_type = pblimage_check_image_types,
+	.verify_header	= pblimage_verify_header,
+	.print_header	= pblimage_print_header,
+	.set_header	= pblimage_set_header,
+};
+
+void init_pbl_image_type(void)
+{
+	pbl_size = 0;
+	mkimage_register(&pblimage_params);
+}
diff --git a/board/freescale/p3060qds/p3060qds.h b/tools/pblimage.h
index 3da6815f0ff..514a477ca45 100644
--- a/board/freescale/p3060qds/p3060qds.h
+++ b/tools/pblimage.h
@@ -1,5 +1,8 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -8,7 +11,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -17,14 +20,17 @@
  * MA 02111-1307 USA
  */
 
-#ifndef __P3060QDS_H__
-#define __P3060QDS_H__
+#ifndef PBLIMAGE_H
+#define PBLIMAGE_H
 
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/u-boot.h>
+#define RCW_BYTES	64
+#define RCW_PREAMBLE	0xaa55aa55
+#define RCW_HEADER	0x010e0100
 
-void fdt_fixup_board_enet(void *blob);
-void pci_of_setup(void *blob, bd_t *bd);
-extern fixed_ddr_parm_t fixed_ddr_parm_0[];
+struct pbl_header {
+	uint32_t preamble;
+	uint32_t rcwheader;
+	uint8_t rcw_data[RCW_BYTES];
+};
 
-#endif
+#endif /* PBLIMAGE_H */