powerpc/mpc85xx: implement workaround for errata DDR111 and DDR134

Workaround for the following errata:
DDR111 - MCKE signal may not function correctly at assertion of HRESET
DDR134 - The automatic CAS-to-Preamble feature of the DDR controller can
         calibrate to incorrect values

These two workarounds must be implemented together because they touch
common registers.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

4 files changed, 116 insertions, 1 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 3f139c7d9ec..e94975a1c68 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -77,6 +77,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
 	puts("Work-around for Erratum DDR115 enabled\n");
 #endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	puts("Work-around for Erratum DDR111 enabled\n");
+	puts("Work-around for Erratum DDR134 enabled\n");
+#endif
 	return 0;
 }
 
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index 35997f2d022..73b320b60ce 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -21,6 +21,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	unsigned int i;
 	volatile ccsr_ddr_t *ddr;
 	u32 temp_sdram_cfg;
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
+	u32 total_gb_size_per_controller;
+#endif
 
 	switch (ctrl_num) {
 	case 0:
@@ -185,6 +189,26 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 		setbits_be32(&ddr->debug[0], 1);
 	}
 #endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	/*
+	 * This is the combined workaround for DDR111 and DDR134
+	 * following the published errata for MPC8572
+	 */
+
+	/* 1. Set EEBACR[3] */
+	setbits_be32(&ecm->eebacr, 0x10000000);
+	debug("Setting EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
+
+	/* 2. Set DINIT in SDRAM_CFG_2*/
+	setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_D_INIT);
+	debug("Setting sdram_cfg_2[D_INIT] to 0x%08x\n",
+		in_be32(&ddr->sdram_cfg_2));
+
+	/* 3. Set DEBUG_3[21] */
+	setbits_be32(&ddr->debug[2], 0x400);
+	debug("Setting DEBUG_3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
+
+#endif	/* part 1 of the workaound */
 
 	/*
 	 * 500 painful micro-seconds must elapse between
@@ -201,7 +225,88 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 	asm volatile("sync;isync");
 
 	/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done.  */
-	while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
+	while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
 		udelay(10000);		/* throttle polling rate */
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	/* continue this workaround */
+
+	/* 4. Clear DEBUG3[21] */
+	clrbits_be32(&ddr->debug[2], 0x400);
+	debug("Clearing D3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
+
+	/* DDR134 workaround starts */
+	/* A: Clear sdram_cfg_2[odt_cfg] */
+	clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_ODT_CFG_MASK);
+	debug("Clearing SDRAM_CFG2[ODT_CFG] to 0x%08x\n",
+		in_be32(&ddr->sdram_cfg_2));
+
+	/* B: Set DEBUG1[15] */
+	setbits_be32(&ddr->debug[0], 0x10000);
+	debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
+
+	/* C: Set timing_cfg_2[cpo] to 0b11111 */
+	setbits_be32(&ddr->timing_cfg_2, TIMING_CFG_2_CPO_MASK);
+	debug("Setting TMING_CFG_2[CPO] to 0x%08x\n",
+		in_be32(&ddr->timing_cfg_2));
+
+	/* D: Set D6 to 0x9f9f9f9f */
+	out_be32(&ddr->debug[5], 0x9f9f9f9f);
+	debug("Setting D6 to 0x%08x\n", in_be32(&ddr->debug[5]));
+
+	/* E: Set D7 to 0x9f9f9f9f */
+	out_be32(&ddr->debug[6], 0x9f9f9f9f);
+	debug("Setting D7 to 0x%08x\n", in_be32(&ddr->debug[6]));
+
+	/* F: Set D2[20] */
+	setbits_be32(&ddr->debug[1], 0x800);
+	debug("Setting D2[20] to 0x%08x\n", in_be32(&ddr->debug[1]));
+
+	/* G: Poll on D2[20] until cleared */
+	while (in_be32(&ddr->debug[1]) & 0x800)
+		udelay(10000);          /* throttle polling rate */
+
+	/* H: Clear D1[15] */
+	clrbits_be32(&ddr->debug[0], 0x10000);
+	debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
+
+	/* I: Set sdram_cfg_2[odt_cfg] */
+	setbits_be32(&ddr->sdram_cfg_2,
+		regs->ddr_sdram_cfg_2 & SDRAM_CFG2_ODT_CFG_MASK);
+	debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
+
+	/* Continuing with the DDR111 workaround */
+	/* 5. Set D2[21] */
+	setbits_be32(&ddr->debug[1], 0x400);
+	debug("Setting D2[21] to 0x%08x\n", in_be32(&ddr->debug[1]));
+
+	/* 6. Poll D2[21] until its cleared */
+	while (in_be32(&ddr->debug[1]) & 0x400)
+		udelay(10000);          /* throttle polling rate */
+
+	/* 7. Wait for 400ms/GB */
+	total_gb_size_per_controller = 0;
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		total_gb_size_per_controller +=
+				((regs->cs[i].bnds & 0xFFFF) >> 6)
+				- (regs->cs[i].bnds >> 22) + 1;
 	}
+	if (in_be32(&ddr->sdram_cfg) & 0x80000)
+		total_gb_size_per_controller <<= 1;
+	debug("Wait for %d ms\n", total_gb_size_per_controller * 400);
+	udelay(total_gb_size_per_controller * 400000);
+
+	/* 8. Set sdram_cfg_2[dinit] if options requires */
+	setbits_be32(&ddr->sdram_cfg_2,
+		regs->ddr_sdram_cfg_2 & SDRAM_CFG2_D_INIT);
+	debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
+
+	/* 9. Poll until dinit is cleared */
+	while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
+		udelay(10000);
+
+	/* 10. Clear EEBACR[3] */
+	clrbits_be32(&ecm->eebacr, 10000000);
+	debug("Clearing EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
+#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
 }
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index a1a3d6b9496..3a29d1cd2ff 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -78,6 +78,7 @@
 #define CONFIG_SYS_FSL_NUM_LAWS		12
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
 #define CONFIG_SYS_FSL_ERRATUM_DDR_115
+#define CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
 
 #elif defined(CONFIG_P1010)
 #define CONFIG_MAX_CPUS			1
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index 852e5c3bd03..02a1f5d3233 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -89,6 +89,11 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
 #define SDRAM_CFG_2T_EN			0x00008000
 #define SDRAM_CFG_BI			0x00000001
 
+#define SDRAM_CFG2_D_INIT		0x00000010
+#define SDRAM_CFG2_ODT_CFG_MASK		0x00600000
+
+#define TIMING_CFG_2_CPO_MASK	0x0F800000
+
 #if defined(CONFIG_P4080)
 #define RD_TO_PRE_MASK		0xf
 #define RD_TO_PRE_SHIFT		13