summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRafal Jaworowski <raj@pollux.denx.de>2006-03-16 17:46:46 +0100
committerRafal Jaworowski <raj@pollux.denx.de>2006-03-16 17:46:46 +0100
commitdc9e499c620a590e0f906e807e24c85807af3338 (patch)
tree035fb097d198f6208bfd90a628b6faf2fb9f22d3
parentd326f4a242971928ef5a6efb411a604b0478ef1c (diff)
Support for DDR with 32-data path. Addotional notes on injecting
multiple-bit errors.
-rw-r--r--board/mpc8349emds/mpc8349emds.c48
-rw-r--r--cpu/mpc83xx/spd_sdram.c61
-rw-r--r--doc/README.mpc8349emds.ddrecc21
-rw-r--r--include/configs/MPC8349EMDS.h47
-rw-r--r--include/spd_sdram.h2
5 files changed, 126 insertions, 53 deletions
diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c
index a468c5a7b5e..73a33f68cec 100644
--- a/board/mpc8349emds/mpc8349emds.c
+++ b/board/mpc8349emds/mpc8349emds.c
@@ -63,11 +63,12 @@ long int initdram (int board_type)
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;
+ puts("Initializing\n");
+
/* DDR SDRAM - Main SODIMM */
im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
#if defined(CONFIG_SPD_EEPROM)
-
- msize = spd_sdram(0);
+ msize = spd_sdram();
#else
msize = fixed_sdram();
#endif
@@ -106,45 +107,40 @@ int fixed_sdram(void)
return -1;
}
}
+ im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+
#if (CFG_DDR_SIZE != 256)
#warning Currenly any ddr size other than 256 is not supported
#endif
-
- im->ddr.csbnds[0].csbnds = 0x00100017;
- im->ddr.csbnds[1].csbnds = 0x0018001f;
- im->ddr.csbnds[2].csbnds = 0x00000007;
- im->ddr.csbnds[3].csbnds = 0x0008000f;
- im->ddr.cs_config[0] = CFG_DDR_CONFIG;
- im->ddr.cs_config[1] = CFG_DDR_CONFIG;
+ im->ddr.csbnds[2].csbnds = 0x0000000f;
im->ddr.cs_config[2] = CFG_DDR_CONFIG;
- im->ddr.cs_config[3] = CFG_DDR_CONFIG;
- im->ddr.timing_cfg_1 =
- 3 << TIMING_CFG1_PRETOACT_SHIFT |
- 7 << TIMING_CFG1_ACTTOPRE_SHIFT |
- 3 << TIMING_CFG1_ACTTORW_SHIFT |
- 4 << TIMING_CFG1_CASLAT_SHIFT |
- 3 << TIMING_CFG1_REFREC_SHIFT |
- 3 << TIMING_CFG1_WRREC_SHIFT |
- 2 << TIMING_CFG1_ACTTOACT_SHIFT |
- 1 << TIMING_CFG1_WRTORD_SHIFT;
- im->ddr.timing_cfg_2 = 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT;
+
+ /* currently we use only one CS, so disable the other banks */
+ im->ddr.cs_config[0] = 0;
+ im->ddr.cs_config[1] = 0;
+ im->ddr.cs_config[3] = 0;
+
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+
im->ddr.sdram_cfg =
SDRAM_CFG_SREN
#if defined(CONFIG_DDR_2T_TIMING)
| SDRAM_CFG_2T_EN
#endif
| 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
- im->ddr.sdram_mode =
- 0x2000 << SDRAM_MODE_ESD_SHIFT |
- 0x0162 << SDRAM_MODE_SD_SHIFT;
+#if defined (CONFIG_DDR_32BIT)
+ /* for 32-bit mode burst length is 8 */
+ im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
+#endif
+ im->ddr.sdram_mode = CFG_DDR_MODE;
- im->ddr.sdram_interval = 0x045B << SDRAM_INTERVAL_REFINT_SHIFT |
- 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT;
+ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
udelay(200);
+ /* enable DDR controller */
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-
return msize;
}
#endif/*!CFG_SPD_EEPROM*/
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 06a7da8f063..b4012a8ddfc 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
* Copyright 2004 Freescale Semiconductor.
* (C) Copyright 2003 Motorola Inc.
* Xianghua Xiao (X.Xiao@motorola.com)
@@ -73,7 +76,32 @@ int read_spd(uint addr)
return ((int) addr);
}
-long int spd_sdram(int(read_spd)(uint addr))
+#undef SPD_DEBUG
+#ifdef SPD_DEBUG
+static void spd_debug(spd_eeprom_t *spd)
+{
+ printf ("\nDIMM type: %-18.18s\n", spd->mpart);
+ printf ("SPD size: %d\n", spd->info_size);
+ printf ("EEPROM size: %d\n", 1 << spd->chip_size);
+ printf ("Memory type: %d\n", spd->mem_type);
+ printf ("Row addr: %d\n", spd->nrow_addr);
+ printf ("Column addr: %d\n", spd->ncol_addr);
+ printf ("# of rows: %d\n", spd->nrows);
+ printf ("Row density: %d\n", spd->row_dens);
+ printf ("# of banks: %d\n", spd->nbanks);
+ printf ("Data width: %d\n",
+ 256 * spd->dataw_msb + spd->dataw_lsb);
+ printf ("Chip width: %d\n", spd->primw);
+ printf ("Refresh rate: %02X\n", spd->refresh);
+ printf ("CAS latencies: %02X\n", spd->cas_lat);
+ printf ("Write latencies: %02X\n", spd->write_lat);
+ printf ("tRP: %d\n", spd->trp);
+ printf ("tRCD: %d\n", spd->trcd);
+ printf ("\n");
+}
+#endif /* SPD_DEBUG */
+
+long int spd_sdram()
{
volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
volatile ddr8349_t *ddr = &immap->ddr;
@@ -85,10 +113,10 @@ long int spd_sdram(int(read_spd)(uint addr))
unsigned char caslat;
unsigned int trfc, trfc_clk, trfc_low;
-#warning Current spd_sdram does not fit its usage... adjust implementation or API...
-
CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
-
+#ifdef SPD_DEBUG
+ spd_debug(&spd);
+#endif
if (spd.nrows > 2) {
puts("DDR:Only two chip selects are supported on ADS.\n");
return 0;
@@ -223,25 +251,31 @@ long int spd_sdram(int(read_spd)(uint addr))
* Only DDR I is supported
* DDR I and II have different mode-register-set definition
*/
-
- /* burst length is always 4 */
switch(caslat) {
case 2:
- ddr->sdram_mode = 0x52; /* 1.5 */
+ tmp = 0x50; /* 1.5 */
break;
case 3:
- ddr->sdram_mode = 0x22; /* 2.0 */
+ tmp = 0x20; /* 2.0 */
break;
case 4:
- ddr->sdram_mode = 0x62; /* 2.5 */
+ tmp = 0x60; /* 2.5 */
break;
case 5:
- ddr->sdram_mode = 0x32; /* 3.0 */
+ tmp = 0x30; /* 3.0 */
break;
default:
puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n");
return 0;
}
+#if defined (CONFIG_DDR_32BIT)
+ /* set burst length to 8 for 32-bit data path */
+ tmp |= 0x03;
+#else
+ /* set burst length to 4 - default for 64-bit data path */
+ tmp |= 0x02;
+#endif
+ ddr->sdram_mode = tmp;
debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
switch(spd.refresh) {
@@ -321,6 +355,10 @@ long int spd_sdram(int(read_spd)(uint addr))
*/
tmp = 0xc2000000;
+#if defined (CONFIG_DDR_32BIT)
+ /* in 32-Bit mode burst len is 8 beats */
+ tmp |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
+#endif
/*
* sdram_cfg[3] = RD_EN - registered DIMM enable
* A value of 0x26 indicates micron registered DIMMS (micron.com)
@@ -350,8 +388,7 @@ long int spd_sdram(int(read_spd)(uint addr))
udelay(500);
debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg);
-
- return memsize;/*in MBytes*/
+ return memsize; /*in MBytes*/
}
#endif /* CONFIG_SPD_EEPROM */
diff --git a/doc/README.mpc8349emds.ddrecc b/doc/README.mpc8349emds.ddrecc
index d8edada5654..401c0b687da 100644
--- a/doc/README.mpc8349emds.ddrecc
+++ b/doc/README.mpc8349emds.ddrecc
@@ -1,3 +1,24 @@
+Overview
+========
+
+The overall usage pattern for ECC diagnostic commands is the following:
+
+ * (injecting errors is initially disabled)
+
+ * define inject mask (which tells the DDR controller what type of errors
+ we'll be injecting: single/multiple bit etc.)
+
+ * enable injecting errors - from now on the controller injects errors as
+ indicated in the inject mask
+
+IMPORTANT NOTICE: enabling injecting multiple-bit errors is potentially
+dangerous as such errors are NOT corrected by the controller. Therefore caution
+should be taken when enabling the injection of multiple-bit errors: it is only
+safe when used on a carefully selected memory area and used under control of
+the 'ecc test' command (see example 'Injecting Multiple-Bit Errors' below). In
+particular, when you simply set the multiple-bit errors in inject mask and
+enable injection, U-Boot is very likely to hang quickly as the errors will be
+injected when it accesses its code, data etc.
Use cases for DDR 'ecc' command:
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index c2bd0f5cea0..39e3d95c300 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -73,27 +73,46 @@
#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */
#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
+/*
+ * 32-bit data path mode.
+ *
+ * Please note that using this mode for devices with the real density of 64-bit
+ * effectively reduces the amount of available memory due to the effect of
+ * wrapping around while translating address to row/columns, for example in the
+ * 256MB module the upper 128MB get aliased with contents of the lower
+ * 128MB); normally this define should be used for devices with real 32-bit
+ * data path.
+ */
+#undef CONFIG_DDR_32BIT
+
#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
#define CFG_SDRAM_BASE CFG_DDR_BASE
#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
#undef CONFIG_DDR_2T_TIMING
#if defined(CONFIG_SPD_EEPROM)
- /*
- * Determine DDR configuration from I2C interface.
- */
- #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
+/*
+ * Determine DDR configuration from I2C interface.
+ */
+#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
#else
- /*
- * Manually set up DDR parameters
- */
- #define CFG_DDR_SIZE 128 /* Mb */
- #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
- #define CFG_DDR_TIMING_1 0x37344321
- #define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
- #define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
- #define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
- #define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page */
+/*
+ * Manually set up DDR parameters
+ */
+#define CFG_DDR_SIZE 256 /* MB */
+#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+#define CFG_DDR_TIMING_1 0x36332321
+#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
+#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
+#define CFG_DDR_INTERVAL 0x04060100 /* autocharge,no open page */
+
+#if defined(CONFIG_DDR_32BIT)
+/* set burst length to 8 for 32-bit data path */
+#define CFG_DDR_MODE 0x00000023 /* DLL,normal,seq,4/2.5, 8 burst len */
+#else
+/* the default burst length is 4 - for 64-bit data path */
+#define CFG_DDR_MODE 0x00000022 /* DLL,normal,seq,4/2.5, 4 burst len */
+#endif
#endif
/*
diff --git a/include/spd_sdram.h b/include/spd_sdram.h
index 4e754ec9e33..a2be96c1aa1 100644
--- a/include/spd_sdram.h
+++ b/include/spd_sdram.h
@@ -1,6 +1,6 @@
#ifndef _SPD_SDRAM_H_
#define _SPD_SDRAM_H_
-long int spd_sdram(int(read_spd)(uint addr));
+long int spd_sdram(void);
#endif