Merge with git://www.denx.de/git/u-boot.git#testing-USB

author: Markus Klotzbuecher <mk@denx.de> 2007-03-23 09:52:17 +0100
committer: Markus Klotzbuecher <mk@pollux.denx.de> 2007-03-23 09:52:17 +0100
commit: f2b07ebd32e42a5b1126c98efc768ddb8908de62 (patch)
tree: e2a374a15d0abf6872fbbdeecf8e34855e56d3c9
parent: 44ba464b99001f8bd1c456a1e9d59726252f707a (diff)
parent: 83dc830b1693252d996bda920cd5f3161d7c64a9 (diff)
37 files changed, 3044 insertions, 424 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 284ba76d898..3bc119fb7d3 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2443,9 +2443,27 @@ Date:	Sat Oct 28 02:29:14 2006 +0200
 
     Enable commandline editing and hush shell on all TQM boards.
 
+<<<<<<< master
+* Code cleanup
+
+* Various USB related patches
+  - Add support for mpc8xx USB device.
+  - Add support for Common Device Class - Abstract Control Model USB console.
+  - Add support for flow control in USB slave devices.
+  - Add support for switching between gserial and cdc_acm using environment.
+  - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
+  - Update usbcore slightly to ease host enumeration.
+  - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
+  - Add AdderUSB_config as a defconfig to enable usage of the USB console
+    by default with the Adder87x U-Boot port.
+  Patch by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
+
+* Cleanup trab board for GCC-4.x
+=======
 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
 Author: Wolfgang Denk <wd@pollux.denx.de>
 Date:	Sat Oct 28 02:28:02 2006 +0200
+>>>>>>> trunk
 
     README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
 
diff --git a/Makefile b/Makefile
index 3f5a70daec2..f15a6e21813 100644
--- a/Makefile
+++ b/Makefile
@@ -122,7 +122,7 @@ ifeq ($(HOSTARCH),$(ARCH))
 CROSS_COMPILE =
 else
 ifeq ($(ARCH),ppc)
-CROSS_COMPILE = powerpc-linux-
+CROSS_COMPILE = ppc_8xx-
 endif
 ifeq ($(ARCH),arm)
 CROSS_COMPILE = arm-linux-
@@ -636,6 +636,9 @@ AdderII_config  \
 	@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
 	@$(MKCONFIG) -a Adder ppc mpc8xx adder
 
+AdderUSB_config:	unconfig
+	@./mkconfig -a AdderUSB ppc mpc8xx adder
+
 ADS860_config     \
 FADS823_config    \
 FADS850SAR_config \
diff --git a/README b/README
index 15428643ede..13ff3ffcfc6 100644
--- a/README
+++ b/README
@@ -883,6 +883,68 @@ The following options need to be configured:
 				for differential drivers: 0x00001000
 				for single ended drivers: 0x00005000
 
+- USB Device:
+		Define the below if you wish to use the USB console.
+		Once firmware is rebuilt from a serial console issue the
+		command "setenv stdin usbtty; setenv stdout usbtty" and
+		attach your usb cable. The Unix command "dmesg" should print
+		it has found a new device. The environment variable usbtty
+		can be set to gserial or cdc_acm to enable your device to
+		appear to a USB host as a Linux gserial device or a
+		Common Device Class Abstract Control Model serial device.
+		If you select usbtty = gserial you should be able to enumerate
+		a Linux host by
+		# modprobe usbserial vendor=0xVendorID product=0xProductID
+		else if using cdc_acm, simply setting the environment
+		variable usbtty to be cdc_acm should suffice. The following
+		might be defined in YourBoardName.h
+
+			CONFIG_USB_DEVICE
+			Define this to build a UDC device
+
+			CONFIG_USB_TTY
+			Define this to have a tty type of device available to
+			talk to the UDC device
+
+			CFG_CONSOLE_IS_IN_ENV
+			Define this if you want stdin, stdout &/or stderr to
+			be set to usbtty.
+
+			mpc8xx:
+				CFG_USB_EXTC_CLK 0xBLAH
+				Derive USB clock from external clock "blah"
+				- CFG_USB_EXTC_CLK 0x02
+
+				CFG_USB_BRG_CLK 0xBLAH
+				Derive USB clock from brgclk
+				- CFG_USB_BRG_CLK 0x04
+
+		If you have a USB-IF assigned VendorID then you may wish to
+		define your own vendor specific values either in BoardName.h
+		or directly in usbd_vendor_info.h. If you don't define
+		CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME,
+		CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot
+		should pretend to be a Linux device to it's target host.
+
+			CONFIG_USBD_MANUFACTURER
+			Define this string as the name of your company for
+			- CONFIG_USBD_MANUFACTURER "my company"
+
+			CONFIG_USBD_PRODUCT_NAME
+			Define this string as the name of your product
+			- CONFIG_USBD_PRODUCT_NAME "acme usb device"
+
+			CONFIG_USBD_VENDORID
+			Define this as your assigned Vendor ID from the USB
+			Implementors Forum. This *must* be a genuine Vendor ID
+			to avoid polluting the USB namespace.
+			- CONFIG_USBD_VENDORID 0xFFFF
+
+			CONFIG_USBD_PRODUCTID
+			Define this as the unique Product ID
+			for your device
+			- CONFIG_USBD_PRODUCTID 0xFFFF
+
 
 - MMC Support:
 		The MMC controller on the Intel PXA is supported. To
diff --git a/board/delta/delta.c b/board/delta/delta.c
index b127ac8cab7..6e227748b01 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -1,10 +1,6 @@
 /*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
+ * (C) Copyright 2006
+ * DENX Software Engineering
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -98,7 +94,6 @@ int board_late_init(void)
 	return 0;
 }
 
-
 /*
  * Magic Key Handling, mainly copied from board/lwmon/lwmon.c
  */
@@ -324,6 +319,12 @@ static void init_DA9030()
 		return;
 	}
 
+	val = 0x80;
+	if(i2c_write(addr, IRQ_MASK_B, 1, &val, 1)) {
+		printf("Error accessing DA9030 via i2c.\n");
+		return;
+	}
+
 	i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */
 	i2c_reg_write(addr, LDO2_3, 0xd1);	/* LDO2 =1,9V, LDO3=3,1V */
 	i2c_reg_write(addr, LDO4_5, 0xcc);	/* LDO2 =1,9V, LDO3=3,1V */
diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c
index f4074aecb11..6f903d2b037 100644
--- a/board/trab/auto_update.c
+++ b/board/trab/auto_update.c
@@ -34,7 +34,7 @@
 
 #ifdef CONFIG_AUTO_UPDATE
 
-#ifndef CONFIG_USB_OHCI
+#ifndef CONFIG_USB_OHCI_NEW
 #error "must define CONFIG_USB_OHCI"
 #endif
 
diff --git a/cpu/arm920t/at91rm9200/Makefile b/cpu/arm920t/at91rm9200/Makefile
index 8d4e478fb5e..eaabad26a0c 100644
--- a/cpu/arm920t/at91rm9200/Makefile
+++ b/cpu/arm920t/at91rm9200/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(SOC).a
 
 COBJS	= bcm5221.o dm9161.o ether.o i2c.o interrupts.o \
-	  lxt972.o serial.o usb_ohci.o
+	  lxt972.o serial.o usb.o
 SOBJS	= lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/arm920t/at91rm9200/usb.c b/cpu/arm920t/at91rm9200/usb.c
new file mode 100644
index 00000000000..366262e4ccd
--- /dev/null
+++ b/cpu/arm920t/at91rm9200/usb.c
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2006
+ * DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+# ifdef CONFIG_AT91RM9200
+
+#include <asm/arch/hardware.h>
+
+int usb_cpu_init()
+{
+	/* Enable USB host clock. */
+	*AT91C_PMC_SCER = AT91C_PMC_UHP;	/* 48MHz clock enabled for UHP */
+	*AT91C_PMC_PCER = 1 << AT91C_ID_UHP;	/* Peripheral Clock Enable Register */
+	return 0;
+}
+
+int usb_cpu_stop()
+{
+	/* Initialization failed */
+	*AT91C_PMC_PCDR = 1 << AT91C_ID_UHP;	/* Peripheral Clock Disable Register */
+	*AT91C_PMC_SCDR = AT91C_PMC_UHP;	/* 48MHz clock disabled for UHP */
+	return 0;
+}
+
+int usb_cpu_init_fail()
+{
+	usb_cpu_stop();
+}
+
+# endif /* CONFIG_AT91RM9200 */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile
index 3a7c4b35fd8..0ff36c596a3 100644
--- a/cpu/arm920t/s3c24x0/Makefile
+++ b/cpu/arm920t/s3c24x0/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(SOC).a
 
 COBJS	= i2c.o interrupts.o serial.o speed.o \
-	  usb_ohci.o
+	  usb.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/arm920t/s3c24x0/usb.c b/cpu/arm920t/s3c24x0/usb.c
new file mode 100644
index 00000000000..ef5d5bf71b1
--- /dev/null
+++ b/cpu/arm920t/s3c24x0/usb.c
@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2006
+ * DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+# if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
+
+#if defined(CONFIG_S3C2400)
+# include <s3c2400.h>
+#elif defined(CONFIG_S3C2410)
+# include <s3c2410.h>
+#endif
+
+int usb_cpu_init (void)
+{
+
+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+	/*
+	 * Set the 48 MHz UPLL clocking. Values are taken from
+	 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
+	 */
+	clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2);
+	gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */
+
+	/*
+	 * Enable USB host clock.
+	 */
+	clk_power->CLKCON |= (1 << 4);
+
+	return 0;
+}
+
+int usb_cpu_stop (void)
+{
+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	/* may not want to do this */
+	clk_power->CLKCON &= ~(1 << 4);
+	return 0;
+}
+
+int usb_cpu_init_fail (void)
+{
+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	clk_power->CLKCON &= ~(1 << 4);
+	return 0;
+}
+
+# endif /* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile
index 235adb7c04e..312b0bfc6cc 100644
--- a/cpu/mpc5xxx/Makefile
+++ b/cpu/mpc5xxx/Makefile
@@ -28,7 +28,7 @@ LIB	= $(obj)lib$(CPU).a
 START	= start.o
 SOBJS	= io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o
 COBJS	= i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \
-	  loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o
+	  loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 96f0f62eb60..1347e0f9f09 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -27,12 +27,12 @@ LIB	= $(obj)lib$(CPU).a
 
 START	= start.o resetvec.o kgdb.o
 SOBJS	= dcr.o
-COBJS	= 405gp_pci.o 4xx_enet.o \
+COBJS	= 405gp_pci.o 440spe_pcie.o 4xx_enet.o \
 	  bedbug_405.o commproc.o \
 	  cpu.o cpu_init.o i2c.o interrupts.o \
 	  miiphy.o ndfc.o sdram.o serial.o \
 	  40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o speed.o \
-	  tlb.o traps.o usb_ohci.o usbdev.o \
+	  tlb.o traps.o usb_ohci.o usbdev.o usb.o \
 	  440spe_pcie.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/pxa/Makefile b/cpu/pxa/Makefile
index cded7ffd35d..8b4367e2051 100644
--- a/cpu/pxa/Makefile
+++ b/cpu/pxa/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
-COBJS	= serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o
+COBJS	= serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o usb.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/pxa/usb.c b/cpu/pxa/usb.c
new file mode 100644
index 00000000000..5d273cb3518
--- /dev/null
+++ b/cpu/pxa/usb.c
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2006
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+# ifdef CONFIG_CPU_MONAHANS
+
+#include <asm/arch/pxa-regs.h>
+
+int usb_cpu_init()
+{
+	/* Enable USB host clock. */
+	CKENA |= (CKENA_2_USBHOST |  CKENA_20_UDC);
+	udelay(100);
+
+	/* Configure Port 2 for Host (USB Client Registers) */
+	UP2OCR = 0x3000c;
+
+#if 0
+	GPIO2_2 = 0x801; /* USBHPEN - Alt. Fkt. 1 */
+	GPIO3_2 = 0x801; /* USBHPWR - Alt. Fkt. 1 */
+#endif
+
+	UHCHR |= UHCHR_FHR;
+	wait_ms(11);
+	UHCHR &= ~UHCHR_FHR;
+
+	UHCHR |= UHCHR_FSBIR;
+	while (UHCHR & UHCHR_FSBIR)
+		udelay(1);
+
+#if 0
+	UHCHR |= UHCHR_PCPL; /* USBHPEN is active low */
+	UHCHR |= UHCHR_PSPL; /* USBHPWR is active low */
+#endif
+
+	UHCHR &= ~UHCHR_SSEP0;
+	UHCHR &= ~UHCHR_SSEP1;
+	UHCHR &= ~UHCHR_SSE;
+
+	return 0;
+}
+
+int usb_cpu_stop()
+{
+	/* may not want to do this */
+	/* CKENA &= ~(CKENA_2_USBHOST |  CKENA_20_UDC); */
+	return 0;
+}
+
+int usb_cpu_init_fail()
+{
+	return 0;
+}
+
+# endif /* CONFIG_CPU_MONAHANS */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci
new file mode 100644
index 00000000000..017c69ab079
--- /dev/null
+++ b/doc/README.generic_usb_ohci
@@ -0,0 +1,43 @@
+Notes on the the generic USB-OHCI driver
+========================================
+
+This driver (drivers/usb_ohci.[ch]) is the result of the merge of
+various existing OHCI drivers that were basically identical beside
+cpu/board dependant initalization. This initalization has been moved
+into cpu/board directories and are called via the hooks below.
+
+Configuration options
+----------------------
+
+CONFIG_USB_OHCI_NEW: enable the new OHCI driver
+
+CFG_USB_OHCI_BOARD_INIT: call the board dependant hooks:
+
+  - extern int usb_board_init(void);
+  - extern int usb_board_stop(void);
+  - extern int usb_cpu_init_fail(void);
+
+CFG_USB_OHCI_CPU_INIT: call the cpu dependant hooks:
+
+  - extern int usb_cpu_init(void);
+  - extern int usb_cpu_stop(void);
+  - extern int usb_cpu_init_fail(void);
+
+CFG_USB_OHCI_REGS_BASE: defines the base address of the OHCI registers
+
+CFG_USB_OHCI_SLOT_NAME: slot name
+
+CFG_USB_OHCI_MAX_ROOT_PORTS: maximal number of ports of the root hub.
+
+
+Endianness issues
+------------------
+
+The LITTLEENDIAN #define determines if the 'swap_16' and 'swap_32'
+macros do byte swapping or not. But some cpus OHCI-controllers such as
+ppc4xx and mpc5xxx operate in little endian mode, so some extra ifdefs
+were necessary to make this work.
+
+
+
+
diff --git a/drivers/Makefile b/drivers/Makefile
index fffc22a5e1d..0ca400c6821 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -46,7 +46,9 @@ COBJS	= 3c589.o 5701rls.o ali512x.o atmel_usart.o \
 	  sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
 	  status_led.o sym53c8xx.o systemace.o ahci.o \
 	  ti_pci1410a.o tigon3.o tsec.o \
-	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
+	  usb_ohci.o \
+	  usbdcore.o usbdcore_ep0.o usbdcore_mpc8xx.o usbdcore_omap1510.o \
+	  usbtty.o \
 	  videomodes.o w83c553f.o \
 	  ks8695eth.o \
 	  pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o	\
diff --git a/cpu/arm920t/at91rm9200/usb_ohci.c b/drivers/usb_ohci.c
index 5b2c56cffc4..c5e4c38efdf 100644
--- a/cpu/arm920t/at91rm9200/usb_ohci.c
+++ b/drivers/usb_ohci.c
@@ -21,7 +21,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -43,16 +43,39 @@
 #include <common.h>
 /* #include <pci.h> no PCI on the S3C24X0 */
 
-#ifdef CONFIG_USB_OHCI
-
-#include <asm/arch/hardware.h>
+#ifdef CONFIG_USB_OHCI_NEW
+
+/* mk: are these really required? */
+#if defined(CONFIG_S3C2400)
+# include <s3c2400.h>
+#elif defined(CONFIG_S3C2410)
+# include <s3c2410.h>
+#elif defined(CONFIG_ARM920T)
+# include <asm/arch/hardware.h>
+#elif defined(CONFIG_CPU_MONAHANS)
+# include <asm/arch/pxa-regs.h>
+#elif defined(CONFIG_MPC5200)
+# include <mpc5xxx.h>
+#endif
 
 #include <malloc.h>
 #include <usb.h>
 #include "usb_ohci.h"
 
-#define OHCI_USE_NPS		/* force NoPowerSwitching mode */
+#define S3C24X0_merge
+
+#if defined(CONFIG_ARM920T) || \
+    defined(CONFIG_S3C2400) || \
+    defined(CONFIG_S3C2410) || \
+    defined(CONFIG_440EP) || \
+    defined(CONFIG_MPC5200)
+# define OHCI_USE_NPS		/* force NoPowerSwitching mode */
+#endif
+
 #undef OHCI_VERBOSE_DEBUG	/* not always helpful */
+#undef DEBUG
+#undef SHOW_INFO
+#undef OHCI_FILL_TRACE
 
 /* For initializing controller (mask in an HCFS mode too) */
 #define OHCI_CONTROL_INIT \
@@ -77,8 +100,13 @@
 #define info(format, arg...) do {} while(0)
 #endif
 
-#define m16_swap(x) swap_16(x)
-#define m32_swap(x) swap_32(x)
+#if defined(CONFIG_440EP) || defined(CONFIG_MPC5200)
+# define m16_swap(x) (x)
+# define m32_swap(x) (x)
+#else
+# define m16_swap(x) swap_16(x)
+# define m32_swap(x) swap_32(x)
+#endif
 
 /* global ohci_t */
 static ohci_t gohci;
@@ -95,6 +123,12 @@ int got_rhsc;
 /* device which was disconnected */
 struct usb_device *devgone;
 
+#ifdef S3C24X0_merge
+/* flag guarding URB transation */
+int urb_finished = 0;
+#endif
+
+
 /*-------------------------------------------------------------------------*/
 
 /* AMD-756 (D2 rev) reports corrupt register contents in some cases.
@@ -399,6 +433,17 @@ int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
 		err("sohci_submit_job: EPIPE");
 		return -1;
 	}
+#ifdef S3C24X0_merge
+	/* if we have an unfinished URB from previous transaction let's
+	 * fail and scream as quickly as possible so as not to corrupt
+	 * further communication */
+	if (!urb_finished) {
+		err("sohci_submit_job: URB NOT FINISHED");
+		return -1;
+	}
+	/* we're about to begin a new transaction here so mark the URB unfinished */
+	urb_finished = 0;
+#endif
 
 	/* every endpoint has a ed, locate and fill it */
 	if (!(ed = ep_add_ed (dev, pipe))) {
@@ -488,7 +533,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
 		if (ohci->ed_controltail == NULL) {
 			writel (ed, &ohci->regs->ed_controlhead);
 		} else {
-			ohci->ed_controltail->hwNextED = m32_swap (ed);
+			ohci->ed_controltail->hwNextED = m32_swap ((unsigned long)ed);
 		}
 		ed->ed_prev = ohci->ed_controltail;
 		if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
@@ -504,7 +549,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
 		if (ohci->ed_bulktail == NULL) {
 			writel (ed, &ohci->regs->ed_bulkhead);
 		} else {
-			ohci->ed_bulktail->hwNextED = m32_swap (ed);
+			ohci->ed_bulktail->hwNextED = m32_swap ((unsigned long)ed);
 		}
 		ed->ed_prev = ohci->ed_bulktail;
 		if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
@@ -525,8 +570,10 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
  * the link from the ed still points to another operational ed or 0
  * so the HC can eventually finish the processing of the unlinked ed */
 
-static int ep_unlink (ohci_t *ohci, ed_t *ed)
+static int ep_unlink (ohci_t *ohci, ed_t *edi)
 {
+	volatile ed_t *ed = edi;
+
 	ed->hwINFO |= m32_swap (OHCI_ED_SKIP);
 
 	switch (ed->type) {
@@ -571,12 +618,14 @@ static int ep_unlink (ohci_t *ohci, ed_t *ed)
 
 /*-------------------------------------------------------------------------*/
 
-/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
- * but the USB stack is a little bit stateless	so we do it at every transaction
- * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
- * in all other cases the state is left unchanged
- * the ed info fields are setted anyway even though most of them should not change */
-
+/* add/reinit an endpoint; this should be done once at the
+ * usb_set_configuration command, but the USB stack is a little bit
+ * stateless so we do it at every transaction if the state of the ed
+ * is ED_NEW then a dummy td is added and the state is changed to
+ * ED_UNLINK in all other cases the state is left unchanged the ed
+ * info fields are setted anyway even though most of them should not
+ * change
+ */
 static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 {
 	td_t *td;
@@ -596,7 +645,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 		ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */
 		/* dummy td; end of td list for ed */
 		td = td_alloc (usb_dev);
-		ed->hwTailP = m32_swap (td);
+		ed->hwTailP = m32_swap ((unsigned long)td);
 		ed->hwHeadP = ed->hwTailP;
 		ed->state = ED_UNLINK;
 		ed->type = usb_pipetype (pipe);
@@ -654,13 +703,15 @@ static void td_fill (ohci_t *ohci, unsigned int info,
 		data = 0;
 
 	td->hwINFO = m32_swap (info);
-	td->hwCBP = m32_swap (data);
+	td->hwCBP = m32_swap ((unsigned long)data);
 	if (data)
-		td->hwBE = m32_swap (data + len - 1);
+		td->hwBE = m32_swap ((unsigned long)(data + len - 1));
 	else
 		td->hwBE = 0;
-	td->hwNextTD = m32_swap (td_pt);
+	td->hwNextTD = m32_swap ((unsigned long)td_pt);
+#ifndef S3C24X0_merge
 	td->hwPSW [0] = m16_swap (((__u32)data & 0x0FFF) | 0xE000);
+#endif
 
 	/* append to queue */
 	td->ed->hwTailP = td->hwNextTD;
@@ -789,6 +840,9 @@ static td_t * dl_reverse_done_list (ohci_t *ohci)
 				} else
 					td_list->ed->hwHeadP &= m32_swap (0xfffffff2);
 			}
+#ifdef CONFIG_MPC5200
+			td_list->hwNextTD = 0;
+#endif
 		}
 
 		td_list->next_dl_td = td_rev;
@@ -827,7 +881,23 @@ static int dl_done_list (ohci_t *ohci, td_t *td_list)
 			dbg("ConditionCode %#x", cc);
 			stat = cc_to_error[cc];
 		}
-
+#ifdef S3C24X0_merge
+		/* see if this done list makes for all TD's of current URB,
+		 * and mark the URB finished if so */
+		if (++(lurb_priv->td_cnt) == lurb_priv->length) {
+#if 1
+			if ((ed->state & (ED_OPER | ED_UNLINK)) &&
+			    (lurb_priv->state != URB_DEL))
+#else
+			if ((ed->state & (ED_OPER | ED_UNLINK)))
+#endif
+				urb_finished = 1;
+			else
+				dbg("dl_done_list: strange.., ED state %x, ed->state\n");
+		} else
+			dbg("dl_done_list: processing TD %x, len %x\n", lurb_priv->td_cnt,
+				lurb_priv->length);
+#endif
 		if (ed->state != ED_NEW) {
 			edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0;
 			edTailP = m32_swap (ed->hwTailP);
@@ -974,7 +1044,6 @@ int rh_check_port_status(ohci_t *controller)
 #ifdef CONFIG_AT91C_PQFP_UHPBUG
 	ndp = (ndp == 2) ? 1:0;
 #endif
-
 	for (i = 0; i < ndp; i++) {
 		temp = roothub_portstatus (controller, i);
 		/* check for a device disconnect */
@@ -1014,9 +1083,15 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
 	}
 
 	bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
+#if defined(CONFIG_440EP) || defined(CONFIG_MPC5200)
+	wValue	      = __swap_16(cmd->value);
+	wIndex	      = __swap_16(cmd->index);
+	wLength	      = __swap_16(cmd->length);
+#else
 	wValue	      = m16_swap (cmd->value);
 	wIndex	      = m16_swap (cmd->index);
 	wLength	      = m16_swap (cmd->length);
+#endif /* CONFIG_440EP || CONFIG_MPC5200 */
 
 	info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
 		dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
@@ -1030,6 +1105,20 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
 	   RH_OTHER | RH_CLASS	almost ever means HUB_PORT here
 	*/
 
+#if defined(CONFIG_440EP) || defined(CONFIG_MPC5200)
+	case RH_GET_STATUS:
+			*(__u16 *) data_buf = __swap_16(1); OK (2);
+	case RH_GET_STATUS | RH_INTERFACE:
+			*(__u16 *) data_buf = __swap_16(0); OK (2);
+	case RH_GET_STATUS | RH_ENDPOINT:
+			*(__u16 *) data_buf = __swap_16(0); OK (2);
+	case RH_GET_STATUS | RH_CLASS:
+			*(__u32 *) data_buf = __swap_32(
+				RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
+			OK (4);
+	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+			*(__u32 *) data_buf = __swap_32(RD_RH_PORTSTAT); OK (4);
+#else
 	case RH_GET_STATUS:
 			*(__u16 *) data_buf = m16_swap (1); OK (2);
 	case RH_GET_STATUS | RH_INTERFACE:
@@ -1042,6 +1131,7 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
 			OK (4);
 	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
 			*(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
+#endif /* CONFIG_440EP || CONFIG_MPC5200 */
 
 	case RH_CLEAR_FEATURE | RH_ENDPOINT:
 		switch (wValue) {
@@ -1170,7 +1260,7 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
 		}
 
 		len = min_t(unsigned int, leni,
-		min_t(unsigned int, data_buf [0], wLength));
+			    min_t(unsigned int, data_buf [0], wLength));
 		OK (len);
 	}
 
@@ -1240,8 +1330,10 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 		return -1;
 	}
 
+#if 0
 	wait_ms(10);
 	/* ohci_dump_status(&gohci); */
+#endif
 
 	/* allow more time for a BULK device to react - some are slow */
 #define BULK_TO	 5000	/* timeout in milliseconds */
@@ -1258,18 +1350,39 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 			stat = USB_ST_CRC_ERR;
 			break;
 		}
+
+#ifdef S3C24X0_merge
+		/* NOTE: since we are not interrupt driven in U-Boot and always
+		 * handle only one URB at a time, we cannot assume the
+		 * transaction finished on the first successful return from
+		 * hc_interrupt().. unless the flag for current URB is set,
+		 * meaning that all TD's to/from device got actually
+		 * transferred and processed. If the current URB is not
+		 * finished we need to re-iterate this loop so as
+		 * hc_interrupt() gets called again as there needs to be some
+		 * more TD's to process still */
+		if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
+#else
 		if (stat >= 0 && stat != 0xff) {
+#endif
 			/* 0xff is returned for an SF-interrupt */
 			break;
 		}
+
 		if (--timeout) {
 			wait_ms(1);
 		} else {
 			err("CTL:TIMEOUT ");
+#ifdef S3C24X0_merge
+			dbg("submit_common_msg: TO status %x\n", stat);
+			stat = USB_ST_CRC_ERR;
+			urb_finished = 1;
+#endif
 			stat = USB_ST_CRC_ERR;
 			break;
 		}
 	}
+#ifndef S3C24X0_merge
 	/* we got an Root Hub Status Change interrupt */
 	if (got_rhsc) {
 #ifdef DEBUG
@@ -1291,6 +1404,7 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 			devgone = dev;
 		}
 	}
+#endif /* S3C24X0_merge */
 
 	dev->status = stat;
 	dev->act_len = transfer_len;
@@ -1381,7 +1495,8 @@ static int hc_reset (ohci_t *ohci)
 		readl(&ohci->regs->control));
 
 	/* Reset USB (needed by some controllers) */
-	writel (0, &ohci->regs->control);
+	ohci->hc_control = 0;
+	writel (ohci->hc_control, &ohci->regs->control);
 
 	/* HC Reset requires max 10 us delay */
 	writel (OHCI_HCR,  &ohci->regs->cmdstatus);
@@ -1460,24 +1575,40 @@ static int hc_start (ohci_t * ohci)
 
 /* an interrupt happens */
 
-static int
-hc_interrupt (void)
+static int hc_interrupt (void)
 {
 	ohci_t *ohci = &gohci;
 	struct ohci_regs *regs = ohci->regs;
 	int ints;
 	int stat = -1;
 
+#ifdef S3C24X0_merge
+
+	if ((ohci->hcca->done_head != 0) &&
+	    !(m32_swap (ohci->hcca->done_head) & 0x01)) {
+		ints =  OHCI_INTR_WDH;
+	} else if ((ints = readl (&regs->intrstatus)) == ~(u32)0) {
+		ohci->disabled++;
+		err ("%s device removed!", ohci->slot_name);
+		return -1;
+	} else if ((ints &= readl (&regs->intrenable)) == 0) {
+		dbg("hc_interrupt: returning..\n");
+		return 0xff;
+	}
+#else
 	if ((ohci->hcca->done_head != 0) && !(m32_swap (ohci->hcca->done_head) & 0x01)) {
 		ints =	OHCI_INTR_WDH;
 	} else {
 		ints = readl (&regs->intrstatus);
 	}
-
+#endif
 	/* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
 
 	if (ints & OHCI_INTR_RHSC) {
 		got_rhsc = 1;
+#ifdef S3C24X0_merge
+		stat = 0xff;
+#endif
 	}
 
 	if (ints & OHCI_INTR_UE) {
@@ -1549,12 +1680,18 @@ static char ohci_inited = 0;
 
 int usb_lowlevel_init(void)
 {
-	/*
-	 * Enable USB host clock.
-	 */
-	*AT91C_PMC_SCER = AT91C_PMC_UHP;	/* 48MHz clock enabled for UHP */
-	*AT91C_PMC_PCER = 1 << AT91C_ID_UHP;	/* Peripheral Clock Enable Register */
 
+#ifdef CFG_USB_OHCI_CPU_INIT
+	/* cpu dependant init */
+	if(usb_cpu_init())
+		return -1;
+#endif
+
+#ifdef CFG_USB_OHCI_BOARD_INIT
+	/*  board dependant init */
+	if(usb_board_init())
+		return -1;
+#endif
 	memset (&gohci, 0, sizeof (ohci_t));
 	memset (&urb_priv, 0, sizeof (urb_priv_t));
 
@@ -1582,29 +1719,42 @@ int usb_lowlevel_init(void)
 	gohci.disabled = 1;
 	gohci.sleeping = 0;
 	gohci.irq = -1;
-	gohci.regs = (struct ohci_regs *)AT91_USB_HOST_BASE;
+	gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE;
 
 	gohci.flags = 0;
-	gohci.slot_name = "at91rm9200";
+	gohci.slot_name = CFG_USB_OHCI_SLOT_NAME;
 
 	if (hc_reset (&gohci) < 0) {
 		hc_release_ohci (&gohci);
-		/* Initialization failed */
-		*AT91C_PMC_PCER = AT91C_ID_UHP;
-		*AT91C_PMC_SCDR = 1 << AT91C_PMC_UHP;	/* 48MHz clock disabled for UHP */
+		err ("can't reset usb-%s", gohci.slot_name);
+#ifdef CFG_USB_OHCI_BOARD_INIT
+		/* board dependant cleanup */
+		usb_board_init_fail();
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+		/* cpu dependant cleanup */
+		usb_cpu_init_fail();
+#endif
 		return -1;
 	}
 
 	/* FIXME this is a second HC reset; why?? */
-/*	writel (gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
-	wait_ms (10);*/
-
+	/* writel(gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
+	   wait_ms(10); */
 	if (hc_start (&gohci) < 0) {
 		err ("can't start usb-%s", gohci.slot_name);
 		hc_release_ohci (&gohci);
 		/* Initialization failed */
-		*AT91C_PMC_PCER = AT91C_ID_UHP;
-		*AT91C_PMC_SCDR = 1 << AT91C_PMC_UHP;	/* 48MHz clock disabled for UHP */
+#ifdef CFG_USB_OHCI_BOARD_INIT
+		/* board dependant cleanup */
+		usb_board_stop();
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+		/* cpu dependant cleanup */
+		usb_cpu_stop();
+#endif
 		return -1;
 	}
 
@@ -1612,6 +1762,9 @@ int usb_lowlevel_init(void)
 	ohci_dump (&gohci, 1);
 #else
 	wait_ms(1);
+# ifdef S3C24X0_merge
+	urb_finished = 1;
+# endif
 #endif
 	ohci_inited = 1;
 	return 0;
@@ -1626,10 +1779,19 @@ int usb_lowlevel_stop(void)
 	/* TODO release any interrupts, etc. */
 	/* call hc_release_ohci() here ? */
 	hc_reset (&gohci);
-	/* may not want to do this */
-	*AT91C_PMC_PCER = 1 << AT91C_ID_UHP;
-	*AT91C_PMC_SCDR = 1 << AT91C_PMC_UHP;	/* 48MHz clock disabled for UHP */
+
+#ifdef CFG_USB_OHCI_BOARD_INIT
+	/* board dependant cleanup */
+	if(usb_board_stop())
+		return -1;
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+	/* cpu dependant cleanup */
+	if(usb_cpu_stop())
+		return -1;
+#endif
+
 	return 0;
 }
-
-#endif /* CONFIG_USB_OHCI */
+#endif /* CONFIG_USB_OHCI_NEW */
diff --git a/cpu/arm920t/at91rm9200/usb_ohci.h b/drivers/usb_ohci.h
index ecb4e937b18..95fbc446549 100644
--- a/cpu/arm920t/at91rm9200/usb_ohci.h
+++ b/drivers/usb_ohci.h
@@ -7,6 +7,15 @@
  * usb-ohci.h
  */
 
+/* functions for doing board or CPU specific setup/cleanup */
+extern int usb_board_init(void);
+extern int usb_board_stop(void);
+extern int usb_cpu_init_fail(void);
+
+extern int usb_cpu_init(void);
+extern int usb_cpu_stop(void);
+extern int usb_cpu_init_fail(void);
+
 
 static int cc_to_error[16] = {
 
@@ -104,7 +113,9 @@ struct td {
 	__u32 hwNextTD;		/* Next TD Pointer */
 	__u32 hwBE;		/* Memory Buffer End Pointer */
 
+/* #ifndef CONFIG_MPC5200 /\* this seems wrong *\/ */
 	__u16 hwPSW[MAXPSW];
+/* #endif */
 	__u8 unused;
 	__u8 index;
 	struct ed *ed;
@@ -128,8 +139,13 @@ typedef struct td td_t;
 #define NUM_INTS 32	/* part of the OHCI standard */
 struct ohci_hcca {
 	__u32	int_table[NUM_INTS];	/* Interrupt ED table */
+#if defined(CONFIG_MPC5200)
+	__u16	pad1;			/* set to 0 on each frame_no change */
+	__u16	frame_no;		/* current frame number */
+#else
 	__u16	frame_no;		/* current frame number */
 	__u16	pad1;			/* set to 0 on each frame_no change */
+#endif
 	__u32	done_head;		/* info returned for an interrupt */
 	u8		reserved_for_hc[116];
 } __attribute((aligned(256)));
@@ -138,7 +154,9 @@ struct ohci_hcca {
 /*
  * Maximum number of root hub ports.
  */
-#define MAX_ROOT_PORTS	15	/* maximum OHCI root hub ports */
+#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS
+# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!"
+#endif
 
 /*
  * This is the structure of the OHCI controller's memory mapped I/O
@@ -172,7 +190,7 @@ struct ohci_regs {
 		__u32	a;
 		__u32	b;
 		__u32	status;
-		__u32	portstatus[MAX_ROOT_PORTS];
+		__u32	portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS];
 	} roothub;
 } __attribute((aligned(32)));
 
diff --git a/drivers/usbdcore_ep0.c b/drivers/usbdcore_ep0.c
index 260befe9786..1e44f322a79 100644
--- a/drivers/usbdcore_ep0.c
+++ b/drivers/usbdcore_ep0.c
@@ -2,6 +2,9 @@
  * (C) Copyright 2003
  * Gerry Hamel, geh@ti.com, Texas Instruments
  *
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, deckard@CodeHermit.ie
+ *
  * Based on
  * linux/drivers/usbd/ep0.c
  *
@@ -39,11 +42,17 @@
  * function driver. This may need to change.
  *
  * XXX
+ *
+ * As alluded to above, a simple callback cdc_recv_setup has been implemented
+ * in the usb_device data structure to facilicate passing
+ * Common Device Class packets to a function driver.
+ *
+ * XXX
  */
 
 #include <common.h>
 
-#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE)
+#if defined(CONFIG_USB_DEVICE)
 #include "usbdcore.h"
 
 #if 0
@@ -69,7 +78,7 @@ static int ep0_get_status (struct usb_device_instance *device,
 	char *cp;
 
 	urb->actual_length = 2;
-	cp = urb->buffer;
+	cp = (char*)urb->buffer;
 	cp[0] = cp[1] = 0;
 
 	switch (requesttype) {
@@ -115,7 +124,7 @@ static int ep0_get_one (struct usb_device_instance *device, struct urb *urb,
  *
  * Copy configuration data to urb transfer buffer if there is room for it.
  */
-static void copy_config (struct urb *urb, void *data, int max_length,
+void copy_config (struct urb *urb, void *data, int max_length,
 			 int max_buf)
 {
 	int available;
@@ -128,10 +137,7 @@ static void copy_config (struct urb *urb, void *data, int max_length,
 		dbg_ep0 (1, "data is NULL");
 		return;
 	}
-	if (!(length = *(unsigned char *) data)) {
-		dbg_ep0 (1, "length is zero");
-		return;
-	}
+	length = max_length;
 
 	if (length > max_length) {
 		dbg_ep0 (1, "length: %d >= max_length: %d", length,
@@ -192,7 +198,7 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
 
 	/* setup tx urb */
 	urb->actual_length = 0;
-	cp = urb->buffer;
+	cp = (char*)urb->buffer;
 
 	dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type));
 
@@ -200,7 +206,6 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
 	case USB_DESCRIPTOR_TYPE_DEVICE:
 		{
 			struct usb_device_descriptor *device_descriptor;
-
 			if (!
 			    (device_descriptor =
 			     usbd_device_device_descriptor (device, port))) {
@@ -214,20 +219,16 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
 			/* correct the correct control endpoint 0 max packet size into the descriptor */
 			device_descriptor =
 				(struct usb_device_descriptor *) urb->buffer;
-			device_descriptor->bMaxPacketSize0 =
-				urb->device->bus->maxpacketsize;
 
 		}
-		/*dbg_ep0(3, "copied device configuration, actual_length: %x", urb->actual_length); */
+		dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length);
 		break;
 
 	case USB_DESCRIPTOR_TYPE_CONFIGURATION:
 		{
-			int bNumInterface;
 			struct usb_configuration_descriptor
 				*configuration_descriptor;
 			struct usb_device_descriptor *device_descriptor;
-
 			if (!
 			    (device_descriptor =
 			     usbd_device_device_descriptor (device, port))) {
@@ -251,130 +252,35 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
 					 index);
 				return -1;
 			}
+			dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength));
 			copy_config (urb, configuration_descriptor,
-				     sizeof (struct
-					     usb_configuration_descriptor),
-				     max);
-
-
-			/* iterate across interfaces for specified configuration */
-			dbg_ep0 (0, "bNumInterfaces: %d",
-				 configuration_descriptor->bNumInterfaces);
-			for (bNumInterface = 0;
-			     bNumInterface <
-			     configuration_descriptor->bNumInterfaces;
-			     bNumInterface++) {
 
-				int bAlternateSetting;
-				struct usb_interface_instance
-					*interface_instance;
-
-				dbg_ep0 (3, "[%d] bNumInterfaces: %d",
-					 bNumInterface,
-					 configuration_descriptor->bNumInterfaces);
-
-				if (! (interface_instance = usbd_device_interface_instance (device,
-								     port, index, bNumInterface)))
-				{
-					dbg_ep0 (3, "[%d] interface_instance NULL",
-						 bNumInterface);
-					return -1;
-				}
-				/* iterate across interface alternates */
-				for (bAlternateSetting = 0;
-				     bAlternateSetting < interface_instance->alternates;
-				     bAlternateSetting++) {
-					/*int class; */
-					int bNumEndpoint;
-					struct usb_interface_descriptor *interface_descriptor;
-
-					struct usb_alternate_instance *alternate_instance;
-
-					dbg_ep0 (3, "[%d:%d] alternates: %d",
-						 bNumInterface,
-						 bAlternateSetting,
-						 interface_instance->alternates);
-
-					if (! (alternate_instance = usbd_device_alternate_instance (device, port, index, bNumInterface, bAlternateSetting))) {
-						dbg_ep0 (3, "[%d] alternate_instance NULL",
-							 bNumInterface);
-						return -1;
-					}
-					/* copy descriptor for this interface */
-					copy_config (urb, alternate_instance->interface_descriptor,
-						     sizeof (struct usb_interface_descriptor),
-						     max);
-
-					/*dbg_ep0(3, "[%d:%d] classes: %d endpoints: %d", bNumInterface, bAlternateSetting, */
-					/*        alternate_instance->classes, alternate_instance->endpoints); */
-
-					/* iterate across classes for this alternate interface */
-#if 0
-					for (class = 0;
-					     class < alternate_instance->classes;
-					     class++) {
-						struct usb_class_descriptor *class_descriptor;
-						/*dbg_ep0(3, "[%d:%d:%d] classes: %d", bNumInterface, bAlternateSetting, */
-						/*        class, alternate_instance->classes); */
-						if (!(class_descriptor = usbd_device_class_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, class))) {
-							dbg_ep0 (3, "[%d] class NULL",
-								 class);
-							return -1;
-						}
-						/* copy descriptor for this class */
-						copy_config (urb, class_descriptor,
-							sizeof (struct usb_class_descriptor),
-							max);
-					}
-#endif
-
-					/* iterate across endpoints for this alternate interface */
-					interface_descriptor = alternate_instance->interface_descriptor;
-					for (bNumEndpoint = 0;
-					     bNumEndpoint < alternate_instance->endpoints;
-					     bNumEndpoint++) {
-						struct usb_endpoint_descriptor *endpoint_descriptor;
-						dbg_ep0 (3, "[%d:%d:%d] endpoint: %d",
-							 bNumInterface,
-							 bAlternateSetting,
-							 bNumEndpoint,
-							 interface_descriptor->
-							 bNumEndpoints);
-						if (!(endpoint_descriptor = usbd_device_endpoint_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, bNumEndpoint))) {
-							dbg_ep0 (3, "[%d] endpoint NULL",
-								 bNumEndpoint);
-							return -1;
-						}
-						/* copy descriptor for this endpoint */
-						copy_config (urb, endpoint_descriptor,
-							     sizeof (struct usb_endpoint_descriptor),
-							     max);
-					}
-				}
-			}
-			dbg_ep0 (3, "lengths: %d %d",
-				 le16_to_cpu (configuration_descriptor->wTotalLength),
-				 urb->actual_length);
+					cpu_to_le16(configuration_descriptor->wTotalLength),
+				     max);
 		}
+
 		break;
 
 	case USB_DESCRIPTOR_TYPE_STRING:
 		{
 			struct usb_string_descriptor *string_descriptor;
-
 			if (!(string_descriptor = usbd_get_string (index))) {
+				serial_printf("Invalid string index %d\n", index);
 				return -1;
 			}
-			/*dbg_ep0(3, "string_descriptor: %p", string_descriptor); */
+			dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength);
 			copy_config (urb, string_descriptor, string_descriptor->bLength, max);
 		}
 		break;
 	case USB_DESCRIPTOR_TYPE_INTERFACE:
+	serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n");
 		return -1;
 	case USB_DESCRIPTOR_TYPE_ENDPOINT:
+		serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n");
 		return -1;
 	case USB_DESCRIPTOR_TYPE_HID:
 		{
+			serial_printf("USB_DESCRIPTOR_TYPE_HID - error not implemented\n");
 			return -1;	/* unsupported at this time */
 #if 0
 			int bNumInterface =
@@ -403,6 +309,7 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
 		break;
 	case USB_DESCRIPTOR_TYPE_REPORT:
 		{
+			serial_printf("USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n");
 			return -1;	/* unsupported at this time */
 #if 0
 			int bNumInterface =
@@ -434,12 +341,19 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
 #endif
 		}
 		break;
+	case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
+		{
+			/* If a USB device supports both a full speed and low speed operation
+			 * we must send a Device_Qualifier descriptor here
+			 */
+			return -1;
+		}
 	default:
 		return -1;
 	}
 
 
-	dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d packet size: %2d",
+	dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d",
 		 urb->buffer, urb->buffer_length, urb->actual_length,
 		 device->bus->endpoint_array[0].tx_packetSize);
 /*
@@ -495,6 +409,12 @@ int ep0_recv_setup (struct urb *urb)
 
 	/* handle USB Standard Request (c.f. USB Spec table 9-2) */
 	if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) {
+		if(device->device_state <= STATE_CONFIGURED){
+			/*	Attempt to handle a CDC specific request if we are
+			 *	in the configured state.
+			 */
+			return device->cdc_recv_setup(request,urb);
+		}
 		dbg_ep0 (1, "non standard request: %x",
 			 request->bmRequestType & USB_REQ_TYPE_MASK);
 		return -1;	/* Stall here */
@@ -567,6 +487,7 @@ int ep0_recv_setup (struct urb *urb)
 						   le16_to_cpu (request->wValue) & 0xff);
 
 		case USB_REQ_GET_CONFIGURATION:
+			serial_printf("get config %d\n", device->configuration);
 			return ep0_get_one (device, urb,
 					    device->configuration);
 
@@ -642,7 +563,6 @@ int ep0_recv_setup (struct urb *urb)
 			/*dbg_ep0(2, "address: %d %d %d", */
 			/*        request->wValue, le16_to_cpu(request->wValue), device->address); */
 
-			serial_printf ("DEVICE_ADDRESS_ASSIGNED.. event?\n");
 			return 0;
 
 		case USB_REQ_SET_DESCRIPTOR:	/* XXX should we support this? */
@@ -653,9 +573,10 @@ int ep0_recv_setup (struct urb *urb)
 			/* c.f. 9.4.7 - the top half of wValue is reserved */
 			/* */
 			if ((device->configuration =
-			     le16_to_cpu (request->wValue) & 0x7f) != 0) {
+				le16_to_cpu (request->wValue) & 0xFF80) != 0) {
 				/* c.f. 9.4.7 - zero is the default or addressed state, in our case this */
 				/* is the same is configuration zero */
+				serial_printf("error setting dev->config to zero!\n");
 				device->configuration = 0;	/* TBR - ?????? */
 			}
 			/* reset interface and alternate settings */
diff --git a/drivers/usbdcore_mpc8xx.c b/drivers/usbdcore_mpc8xx.c
new file mode 100644
index 00000000000..e87284b1787
--- /dev/null
+++ b/drivers/usbdcore_mpc8xx.c
@@ -0,0 +1,1400 @@
+/*
+ * Copyright (C) 2006 by Bryan O'Donoghue, CodeHermit
+ * bodonoghue@CodeHermit.ie
+ *
+ * References
+ * DasUBoot/drivers/usbdcore_omap1510.c, for design and implementation ideas.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+/*
+ * Notes :
+ * 1.	#define __SIMULATE_ERROR__ to inject a CRC error into every 2nd TX
+ *		packet to force the USB re-transmit protocol.
+ *
+ * 2.	#define __DEBUG_UDC__ to switch on debug tracing to serial console
+ *	be careful that tracing doesn't create Hiesen-bugs with respect to
+ *	response timeouts to control requests.
+ *
+ * 3.	This driver should be able to support any higher level driver that
+ *	that wants to do either of the two standard UDC implementations
+ *	Control-Bulk-Interrupt or  Bulk-IN/Bulk-Out standards. Hence
+ *	gserial and cdc_acm should work with this code.
+ *
+ * 4.	NAK events never actually get raised at all, the documentation
+ *	is just wrong !
+ *
+ * 5.	For some reason, cbd_datlen is *always* +2 the value it should be.
+ *	this means that having an RX cbd of 16 bytes is not possible, since
+ *	the same size is reported for 14 bytes received as 16 bytes received
+ *	until we can find out why this happens, RX cbds must be limited to 8
+ *	bytes. TODO: check errata for this behaviour.
+ *
+ * 6.	Right now this code doesn't support properly powering up with the USB
+ *	cable attached to the USB host my development board the Adder87x doesn't
+ *	have a pull-up fitted to allow this, so it is necessary to power the
+ *	board and *then* attached the USB cable to the host. However somebody
+ *	with a different design in their board may be able to keep the cable
+ *	constantly connected and simply enable/disable a pull-up  re
+ *	figure 31.1 in MPC885RM.pdf instead of having to power up the board and
+ *	then attach the cable !
+ *
+ */
+#include <common.h>
+#include <config.h>
+
+#if defined(CONFIG_MPC885_FAMILY) && defined(CONFIG_USB_DEVICE)
+#include <commproc.h>
+#include "usbdcore.h"
+#include "usbdcore_mpc8xx.h"
+#include "usbdcore_ep0.h"
+
+#define ERR(fmt, args...)\
+	serial_printf("ERROR : [%s] %s:%d: "fmt,\
+				__FILE__,__FUNCTION__,__LINE__, ##args)
+#ifdef __DEBUG_UDC__
+#define DBG(fmt,args...)\
+		serial_printf("[%s] %s:%d: "fmt,\
+				__FILE__,__FUNCTION__,__LINE__, ##args)
+#else
+#define DBG(fmt,args...)
+#endif
+
+/* Static Data */
+#ifdef __SIMULATE_ERROR__
+static char err_poison_test = 0;
+#endif
+static struct mpc8xx_ep ep_ref[MAX_ENDPOINTS];
+static u32 address_base = STATE_NOT_READY;
+static mpc8xx_udc_state_t udc_state = 0;
+static struct usb_device_instance *udc_device = 0;
+static volatile usb_epb_t *endpoints[MAX_ENDPOINTS];
+static volatile cbd_t *tx_cbd[TX_RING_SIZE];
+static volatile cbd_t *rx_cbd[RX_RING_SIZE];
+static volatile immap_t *immr = 0;
+static volatile cpm8xx_t *cp = 0;
+static volatile usb_pram_t *usb_paramp = 0;
+static volatile usb_t *usbp = 0;
+static int rx_ct = 0;
+static int tx_ct = 0;
+
+/* Static Function Declarations */
+static void mpc8xx_udc_state_transition_up (usb_device_state_t initial,
+					    usb_device_state_t final);
+static void mpc8xx_udc_state_transition_down (usb_device_state_t initial,
+					      usb_device_state_t final);
+static void mpc8xx_udc_stall (unsigned int ep);
+static void mpc8xx_udc_flush_tx_fifo (int epid);
+static void mpc8xx_udc_flush_rx_fifo (void);
+static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi,
+				struct urb *tx_urb);
+static void mpc8xx_udc_dump_request (struct usb_device_request *request);
+static void mpc8xx_udc_clock_init (volatile immap_t * immr,
+				   volatile cpm8xx_t * cp);
+static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi);
+static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_cbd_init (void);
+static void mpc8xx_udc_endpoint_init (void);
+static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size);
+static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment);
+static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_set_nak (unsigned int ep);
+static short mpc8xx_udc_handle_txerr (void);
+static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid);
+
+/******************************************************************************
+			       Global Linkage
+ *****************************************************************************/
+
+/* udc_init
+ *
+ * Do initial bus gluing
+ */
+int udc_init (void)
+{
+	/* Init various pointers */
+	immr = (immap_t *) CFG_IMMR;
+	cp = (cpm8xx_t *) & (immr->im_cpm);
+	usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]);
+	usbp = (usb_t *) & (cp->cp_scc[0]);
+
+	memset (ep_ref, 0x00, (sizeof (struct mpc8xx_ep) * MAX_ENDPOINTS));
+
+	udc_device = 0;
+	udc_state = STATE_NOT_READY;
+
+	usbp->usmod = 0x00;
+	usbp->uscom = 0;
+
+	/* Set USB Frame #0, Respond at Address & Get a clock source  */
+	usbp->usaddr = 0x00;
+	mpc8xx_udc_clock_init (immr, cp);
+
+	/* PA15, PA14 as perhiperal USBRXD and USBOE */
+	immr->im_ioport.iop_padir &= ~0x0003;
+	immr->im_ioport.iop_papar |= 0x0003;
+
+	/* PC11/PC10 as peripheral USBRXP USBRXN */
+	immr->im_ioport.iop_pcso |= 0x0030;
+
+	/* PC7/PC6 as perhiperal USBTXP and USBTXN */
+	immr->im_ioport.iop_pcdir |= 0x0300;
+	immr->im_ioport.iop_pcpar |= 0x0300;
+
+	/* Set the base address */
+	address_base = (u32) (cp->cp_dpmem + CPM_USB_BASE);
+
+	/* Initialise endpoints and circular buffers */
+	mpc8xx_udc_endpoint_init ();
+	mpc8xx_udc_cbd_init ();
+
+	/* Assign allocated Dual Port Endpoint descriptors */
+	usb_paramp->ep0ptr = (u32) endpoints[0];
+	usb_paramp->ep1ptr = (u32) endpoints[1];
+	usb_paramp->ep2ptr = (u32) endpoints[2];
+	usb_paramp->ep3ptr = (u32) endpoints[3];
+	usb_paramp->frame_n = 0;
+
+	DBG ("ep0ptr=0x%08x ep1ptr=0x%08x ep2ptr=0x%08x ep3ptr=0x%08x\n",
+	     usb_paramp->ep0ptr, usb_paramp->ep1ptr, usb_paramp->ep2ptr,
+	     usb_paramp->ep3ptr);
+
+	return 0;
+}
+
+/* udc_irq
+ *
+ * Poll for whatever events may have occured
+ */
+void udc_irq (void)
+{
+	int epid = 0;
+	volatile cbd_t *rx_cbdp = 0;
+	volatile cbd_t *rx_cbdp_base = 0;
+
+	if (udc_state != STATE_READY) {
+		return;
+	}
+
+	if (usbp->usber & USB_E_BSY) {
+		/* This shouldn't happen. If it does then it's a bug ! */
+		usbp->usber |= USB_E_BSY;
+		mpc8xx_udc_flush_rx_fifo ();
+	}
+
+	/* Scan all RX/Bidirectional Endpoints for RX data. */
+	for (epid = 0; epid < MAX_ENDPOINTS; epid++) {
+		if (!ep_ref[epid].prx) {
+			continue;
+		}
+		rx_cbdp = rx_cbdp_base = ep_ref[epid].prx;
+
+		do {
+			if (!(rx_cbdp->cbd_sc & RX_BD_E)) {
+
+				if (rx_cbdp->cbd_sc & 0x1F) {
+					/* Corrupt data discard it.
+					 * Controller has NAK'd this packet.
+					 */
+					mpc8xx_udc_clear_rxbd (rx_cbdp);
+
+				} else {
+					if (!epid) {
+						mpc8xx_udc_ep0_rx (rx_cbdp);
+
+					} else {
+						/* Process data */
+						mpc8xx_udc_set_nak (epid);
+						mpc8xx_udc_epn_rx (epid, rx_cbdp);
+						mpc8xx_udc_clear_rxbd (rx_cbdp);
+					}
+				}
+
+				/* Advance RX CBD pointer */
+				mpc8xx_udc_advance_rx (&rx_cbdp, epid);
+				ep_ref[epid].prx = rx_cbdp;
+			} else {
+				/* Advance RX CBD pointer */
+				mpc8xx_udc_advance_rx (&rx_cbdp, epid);
+			}
+
+		} while (rx_cbdp != rx_cbdp_base);
+	}
+
+	/* Handle TX events as appropiate, the correct place to do this is
+	 * in a tx routine. Perhaps TX on epn was pre-empted by ep0
+	 */
+
+	if (usbp->usber & USB_E_TXB) {
+		usbp->usber |= USB_E_TXB;
+	}
+
+	if (usbp->usber & (USB_TX_ERRMASK)) {
+		mpc8xx_udc_handle_txerr ();
+	}
+
+	/* Switch to the default state, respond at the default address */
+	if (usbp->usber & USB_E_RESET) {
+		usbp->usber |= USB_E_RESET;
+		usbp->usaddr = 0x00;
+		udc_device->device_state = STATE_DEFAULT;
+	}
+
+	/* if(usbp->usber&USB_E_IDLE){
+	   We could suspend here !
+	   usbp->usber|=USB_E_IDLE;
+	   DBG("idle state change\n");
+	   }
+	   if(usbp->usbs){
+	   We could resume here when IDLE is deasserted !
+	   Not worth doing, so long as we are self powered though.
+	   }
+	*/
+
+	return;
+}
+
+/* udc_endpoint_write
+ *
+ * Write some data to an endpoint
+ */
+int udc_endpoint_write (struct usb_endpoint_instance *epi)
+{
+	int ep = 0;
+	short epid = 1, unnak = 0, ret = 0;
+
+	if (udc_state != STATE_READY) {
+		ERR ("invalid udc_state != STATE_READY!\n");
+		return -1;
+	}
+
+	if (!udc_device || !epi) {
+		return -1;
+	}
+
+	if (udc_device->device_state != STATE_CONFIGURED) {
+		return -1;
+	}
+
+	ep = epi->endpoint_address & 0x03;
+	if (ep >= MAX_ENDPOINTS) {
+		return -1;
+	}
+
+	/* Set NAK for all RX endpoints during TX */
+	for (epid = 1; epid < MAX_ENDPOINTS; epid++) {
+
+		/* Don't set NAK on DATA IN/CONTROL endpoints */
+		if (ep_ref[epid].sc & USB_DIR_IN) {
+			continue;
+		}
+
+		if (!(usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK))) {
+			unnak |= 1 << epid;
+		}
+
+		mpc8xx_udc_set_nak (epid);
+	}
+
+	mpc8xx_udc_init_tx (&udc_device->bus->endpoint_array[ep],
+			    epi->tx_urb);
+	ret = mpc8xx_udc_ep_tx (&udc_device->bus->endpoint_array[ep]);
+
+	/* Remove temporary NAK */
+	for (epid = 1; epid < MAX_ENDPOINTS; epid++) {
+		if (unnak & (1 << epid)) {
+			udc_unset_nak (epid);
+		}
+	}
+
+	return ret;
+}
+
+/* mpc8xx_udc_assign_urb
+ *
+ * Associate a given urb to an endpoint TX or RX transmit/receive buffers
+ */
+static int mpc8xx_udc_assign_urb (int ep, char direction)
+{
+	struct usb_endpoint_instance *epi = 0;
+
+	if (ep >= MAX_ENDPOINTS) {
+		goto err;
+	}
+	epi = &udc_device->bus->endpoint_array[ep];
+	if (!epi) {
+		goto err;
+	}
+
+	if (!ep_ref[ep].urb) {
+		ep_ref[ep].urb = usbd_alloc_urb (udc_device, udc_device->bus->endpoint_array);
+		if (!ep_ref[ep].urb) {
+			goto err;
+		}
+	} else {
+		ep_ref[ep].urb->actual_length = 0;
+	}
+
+	switch (direction) {
+	case USB_DIR_IN:
+		epi->tx_urb = ep_ref[ep].urb;
+		break;
+	case USB_DIR_OUT:
+		epi->rcv_urb = ep_ref[ep].urb;
+		break;
+	default:
+		goto err;
+	}
+	return 0;
+
+      err:
+	udc_state = STATE_ERROR;
+	return -1;
+}
+
+/* udc_setup_ep
+ *
+ * Associate U-Boot software endpoints to mpc8xx endpoint parameter ram
+ * Isochronous endpoints aren't yet supported!
+ */
+void udc_setup_ep (struct usb_device_instance *device, unsigned int ep,
+		   struct usb_endpoint_instance *epi)
+{
+	uchar direction = 0;
+	int ep_attrib = 0;
+
+	if (epi && (ep < MAX_ENDPOINTS)) {
+
+		if (ep == 0) {
+			if (epi->rcv_attributes != USB_ENDPOINT_XFER_CONTROL
+			    || epi->tx_attributes !=
+			    USB_ENDPOINT_XFER_CONTROL) {
+
+				/* ep0 must be a control endpoint */
+				udc_state = STATE_ERROR;
+				return;
+
+			}
+			if (!(ep_ref[ep].sc & EP_ATTACHED)) {
+				mpc8xx_udc_cbd_attach (ep, epi->tx_packetSize,
+						       epi->rcv_packetSize);
+			}
+			usbp->usep[ep] = 0x0000;
+			return;
+		}
+
+		if ((epi->endpoint_address & USB_ENDPOINT_DIR_MASK)
+		    == USB_DIR_IN) {
+
+			direction = 1;
+			ep_attrib = epi->tx_attributes;
+			epi->rcv_packetSize = 0;
+			ep_ref[ep].sc |= USB_DIR_IN;
+		} else {
+
+			direction = 0;
+			ep_attrib = epi->rcv_attributes;
+			epi->tx_packetSize = 0;
+			ep_ref[ep].sc &= ~USB_DIR_IN;
+		}
+
+		if (mpc8xx_udc_assign_urb (ep, epi->endpoint_address
+					   & USB_ENDPOINT_DIR_MASK)) {
+			return;
+		}
+
+		switch (ep_attrib) {
+		case USB_ENDPOINT_XFER_CONTROL:
+			if (!(ep_ref[ep].sc & EP_ATTACHED)) {
+				mpc8xx_udc_cbd_attach (ep,
+						       epi->tx_packetSize,
+						       epi->rcv_packetSize);
+			}
+			usbp->usep[ep] = ep << 12;
+			epi->rcv_urb = epi->tx_urb = ep_ref[ep].urb;
+
+			break;
+		case USB_ENDPOINT_XFER_BULK:
+		case USB_ENDPOINT_XFER_INT:
+			if (!(ep_ref[ep].sc & EP_ATTACHED)) {
+				if (direction) {
+					mpc8xx_udc_cbd_attach (ep,
+							       epi->tx_packetSize,
+							       0);
+				} else {
+					mpc8xx_udc_cbd_attach (ep,
+							       0,
+							       epi->rcv_packetSize);
+				}
+			}
+			usbp->usep[ep] = (ep << 12) | ((ep_attrib) << 8);
+
+			break;
+		case USB_ENDPOINT_XFER_ISOC:
+		default:
+			serial_printf ("Error endpoint attrib %d>3\n", ep_attrib);
+			udc_state = STATE_ERROR;
+			break;
+		}
+	}
+
+}
+
+/* udc_connect
+ *
+ * Move state, switch on the USB
+ */
+void udc_connect (void)
+{
+	/* Enable pull-up resistor on D+
+	 * TODO: fit a pull-up resistor to drive SE0 for > 2.5us
+	 */
+
+	if (udc_state != STATE_ERROR) {
+		udc_state = STATE_READY;
+		usbp->usmod |= USMOD_EN;
+	}
+}
+
+/* udc_disconnect
+ *
+ * Disconnect is not used but, is included for completeness
+ */
+void udc_disconnect (void)
+{
+	/* Disable pull-up resistor on D-
+	 * TODO: fix a pullup resistor to control this
+	 */
+
+	if (udc_state != STATE_ERROR) {
+		udc_state = STATE_NOT_READY;
+	}
+	usbp->usmod &= ~USMOD_EN;
+}
+
+/* udc_enable
+ *
+ * Grab an EP0 URB, register interest in a subset of USB events
+ */
+void udc_enable (struct usb_device_instance *device)
+{
+	if (udc_state == STATE_ERROR) {
+		return;
+	}
+
+	udc_device = device;
+
+	if (!ep_ref[0].urb) {
+		ep_ref[0].urb = usbd_alloc_urb (device, device->bus->endpoint_array);
+	}
+
+	/* Register interest in all events except SOF, enable transceiver */
+	usbp->usber = 0x03FF;
+	usbp->usbmr = 0x02F7;
+
+	return;
+}
+
+/* udc_disable
+ *
+ * disable the currently hooked device
+ */
+void udc_disable (void)
+{
+	int i = 0;
+
+	if (udc_state == STATE_ERROR) {
+		DBG ("Won't disable UDC. udc_state==STATE_ERROR !\n");
+		return;
+	}
+
+	udc_device = 0;
+
+	for (; i < MAX_ENDPOINTS; i++) {
+		if (ep_ref[i].urb) {
+			usbd_dealloc_urb (ep_ref[i].urb);
+			ep_ref[i].urb = 0;
+		}
+	}
+
+	usbp->usbmr = 0x00;
+	usbp->usmod = ~USMOD_EN;
+	udc_state = STATE_NOT_READY;
+}
+
+/* udc_startup_events
+ *
+ * Enable the specified device
+ */
+void udc_startup_events (struct usb_device_instance *device)
+{
+	udc_enable (device);
+	if (udc_state == STATE_READY) {
+		usbd_device_event_irq (device, DEVICE_CREATE, 0);
+	}
+}
+
+/* udc_set_nak
+ *
+ * Allow upper layers to signal lower layers should not accept more RX data
+ *
+ */
+void udc_set_nak (int epid)
+{
+	if (epid) {
+		mpc8xx_udc_set_nak (epid);
+	}
+}
+
+/* udc_unset_nak
+ *
+ * Suspend sending of NAK tokens for DATA OUT tokens on a given endpoint.
+ * Switch off NAKing on this endpoint to accept more data output from host.
+ *
+ */
+void udc_unset_nak (int epid)
+{
+	if (epid > MAX_ENDPOINTS) {
+		return;
+	}
+
+	if (usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK)) {
+		usbp->usep[epid] &= ~(USEP_THS_NAK | USEP_RHS_NAK);
+		__asm__ ("eieio");
+	}
+}
+
+/******************************************************************************
+			      Static Linkage
+******************************************************************************/
+
+/* udc_state_transition_up
+ * udc_state_transition_down
+ *
+ * Helper functions to implement device state changes.	The device states and
+ * the events that transition between them are:
+ *
+ *				STATE_ATTACHED
+ *				||	/\
+ *				\/	||
+ *	DEVICE_HUB_CONFIGURED			DEVICE_HUB_RESET
+ *				||	/\
+ *				\/	||
+ *				STATE_POWERED
+ *				||	/\
+ *				\/	||
+ *	DEVICE_RESET				DEVICE_POWER_INTERRUPTION
+ *				||	/\
+ *				\/	||
+ *				STATE_DEFAULT
+ *				||	/\
+ *				\/	||
+ *	DEVICE_ADDRESS_ASSIGNED			DEVICE_RESET
+ *				||	/\
+ *				\/	||
+ *				STATE_ADDRESSED
+ *				||	/\
+ *				\/	||
+ *	DEVICE_CONFIGURED			DEVICE_DE_CONFIGURED
+ *				||	/\
+ *				\/	||
+ *				STATE_CONFIGURED
+ *
+ * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED
+ * to STATE_CONFIGURED) from the specified initial state to the specified final
+ * state, passing through each intermediate state on the way.  If the initial
+ * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
+ * no state transitions will take place.
+ *
+ * udc_state_transition_down transitions down (in the direction from
+ * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
+ * specified final state, passing through each intermediate state on the way.
+ * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
+ * state, then no state transitions will take place.
+ *
+ */
+
+static void mpc8xx_udc_state_transition_up (usb_device_state_t initial,
+					    usb_device_state_t final)
+{
+	if (initial < final) {
+		switch (initial) {
+		case STATE_ATTACHED:
+			usbd_device_event_irq (udc_device,
+					       DEVICE_HUB_CONFIGURED, 0);
+			if (final == STATE_POWERED)
+				break;
+		case STATE_POWERED:
+			usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+			if (final == STATE_DEFAULT)
+				break;
+		case STATE_DEFAULT:
+			usbd_device_event_irq (udc_device,
+					       DEVICE_ADDRESS_ASSIGNED, 0);
+			if (final == STATE_ADDRESSED)
+				break;
+		case STATE_ADDRESSED:
+			usbd_device_event_irq (udc_device, DEVICE_CONFIGURED,
+					       0);
+		case STATE_CONFIGURED:
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+static void mpc8xx_udc_state_transition_down (usb_device_state_t initial,
+					      usb_device_state_t final)
+{
+	if (initial > final) {
+		switch (initial) {
+		case STATE_CONFIGURED:
+			usbd_device_event_irq (udc_device,
+					       DEVICE_DE_CONFIGURED, 0);
+			if (final == STATE_ADDRESSED)
+				break;
+		case STATE_ADDRESSED:
+			usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+			if (final == STATE_DEFAULT)
+				break;
+		case STATE_DEFAULT:
+			usbd_device_event_irq (udc_device,
+					       DEVICE_POWER_INTERRUPTION, 0);
+			if (final == STATE_POWERED)
+				break;
+		case STATE_POWERED:
+			usbd_device_event_irq (udc_device, DEVICE_HUB_RESET,
+					       0);
+		case STATE_ATTACHED:
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+/* mpc8xx_udc_stall
+ *
+ * Force returning of STALL tokens on the given endpoint. Protocol or function
+ * STALL conditions are permissable here
+ */
+static void mpc8xx_udc_stall (unsigned int ep)
+{
+	usbp->usep[ep] |= STALL_BITMASK;
+}
+
+/* mpc8xx_udc_set_nak
+ *
+ * Force returning of NAK responses for the given endpoint as a kind of very
+ * simple flow control
+ */
+static void mpc8xx_udc_set_nak (unsigned int ep)
+{
+	usbp->usep[ep] |= NAK_BITMASK;
+	__asm__ ("eieio");
+}
+
+/* mpc8xx_udc_handle_txerr
+ *
+ * Handle errors relevant to TX. Return a status code to allow calling
+ * indicative of what if anything happened
+ */
+static short mpc8xx_udc_handle_txerr ()
+{
+	short ep = 0, ret = 0;
+
+	for (; ep < TX_RING_SIZE; ep++) {
+		if (usbp->usber & (0x10 << ep)) {
+
+			/* Timeout or underrun */
+			if (tx_cbd[ep]->cbd_sc & 0x06) {
+				ret = 1;
+				mpc8xx_udc_flush_tx_fifo (ep);
+
+			} else {
+				if (usbp->usep[ep] & STALL_BITMASK) {
+					if (!ep) {
+						usbp->usep[ep] &= ~STALL_BITMASK;
+					}
+				}	/* else NAK */
+			}
+			usbp->usber |= (0x10 << ep);
+		}
+	}
+	return ret;
+}
+
+/* mpc8xx_udc_advance_rx
+ *
+ * Advance cbd rx
+ */
+static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid)
+{
+	if ((*rx_cbdp)->cbd_sc & RX_BD_W) {
+		*rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CFG_IMMR);
+
+	} else {
+		(*rx_cbdp)++;
+	}
+}
+
+
+/* mpc8xx_udc_flush_tx_fifo
+ *
+ * Flush a given TX fifo. Assumes one tx cbd per endpoint
+ */
+static void mpc8xx_udc_flush_tx_fifo (int epid)
+{
+	volatile cbd_t *tx_cbdp = 0;
+
+	if (epid > MAX_ENDPOINTS) {
+		return;
+	}
+
+	/* TX stop */
+	immr->im_cpm.cp_cpcr = ((epid << 2) | 0x1D01);
+	__asm__ ("eieio");
+	while (immr->im_cpm.cp_cpcr & 0x01);
+
+	usbp->uscom = 0x40 | 0;
+
+	/* reset ring */
+	tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CFG_IMMR);
+	tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W);
+
+
+	endpoints[epid]->tptr = endpoints[epid]->tbase;
+	endpoints[epid]->tstate = 0x00;
+	endpoints[epid]->tbcnt = 0x00;
+
+	/* TX start */
+	immr->im_cpm.cp_cpcr = ((epid << 2) | 0x2D01);
+	__asm__ ("eieio");
+	while (immr->im_cpm.cp_cpcr & 0x01);
+
+	return;
+}
+
+/* mpc8xx_udc_flush_rx_fifo
+ *
+ * For the sake of completeness of the namespace, it seems like
+ * a good-design-decision (tm) to include mpc8xx_udc_flush_rx_fifo();
+ * If RX_BD_E is true => a driver bug either here or in an upper layer
+ * not polling frequently enough. If RX_BD_E is true we have told the host
+ * we have accepted data but, the CPM found it had no-where to put that data
+ * which needless to say would be a bad thing.
+ */
+static void mpc8xx_udc_flush_rx_fifo ()
+{
+	int i = 0;
+
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) {
+			ERR ("buf %p used rx data len = 0x%x sc=0x%x!\n",
+			     rx_cbd[i], rx_cbd[i]->cbd_datlen,
+			     rx_cbd[i]->cbd_sc);
+
+		}
+	}
+	ERR ("BUG : Input over-run\n");
+}
+
+/* mpc8xx_udc_clear_rxbd
+ *
+ * Release control of RX CBD to CP.
+ */
+static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp)
+{
+	rx_cbdp->cbd_datlen = 0x0000;
+	rx_cbdp->cbd_sc = ((rx_cbdp->cbd_sc & RX_BD_W) | (RX_BD_E | RX_BD_I));
+	__asm__ ("eieio");
+}
+
+/* mpc8xx_udc_tx_irq
+ *
+ * Parse for tx timeout, control RX or USB reset/busy conditions
+ * Return -1 on timeout, -2 on fatal error, else return zero
+ */
+static int mpc8xx_udc_tx_irq (int ep)
+{
+	int i = 0;
+
+	if (usbp->usber & (USB_TX_ERRMASK)) {
+		if (mpc8xx_udc_handle_txerr ()) {
+			/* Timeout, controlling function must retry send */
+			return -1;
+		}
+	}
+
+	if (usbp->usber & (USB_E_RESET | USB_E_BSY)) {
+		/* Fatal, abandon TX transaction */
+		return -2;
+	}
+
+	if (usbp->usber & USB_E_RXB) {
+		for (i = 0; i < RX_RING_SIZE; i++) {
+			if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) {
+				if ((rx_cbd[i] == ep_ref[0].prx) || ep) {
+					return -2;
+				}
+			}
+		}
+	}
+
+	return 0;
+}
+
+/* mpc8xx_udc_ep_tx
+ *
+ * Transmit in a re-entrant fashion outbound USB packets.
+ * Implement retry/timeout mechanism described in USB specification
+ * Toggle DATA0/DATA1 pids as necessary
+ * Introduces non-standard tx_retry. The USB standard has no scope for slave
+ * devices to give up TX, however tx_retry stops us getting stuck in an endless
+ * TX loop.
+ */
+static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
+{
+	struct urb *urb = epi->tx_urb;
+	volatile cbd_t *tx_cbdp = 0;
+	unsigned int ep = 0, pkt_len = 0, x = 0, tx_retry = 0;
+	int ret = 0;
+
+	if (!epi || (epi->endpoint_address & 0x03) >= MAX_ENDPOINTS || !urb) {
+		return -1;
+	}
+
+	ep = epi->endpoint_address & 0x03;
+	tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+
+	if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) {
+		mpc8xx_udc_flush_tx_fifo (ep);
+		usbp->usber |= USB_E_TXB;
+	};
+
+	while (tx_retry++ < 100) {
+		ret = mpc8xx_udc_tx_irq (ep);
+		if (ret == -1) {
+			/* ignore timeout here */
+		} else if (ret == -2) {
+			/* Abandon TX */
+			mpc8xx_udc_flush_tx_fifo (ep);
+			return -1;
+		}
+
+		tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+		while (tx_cbdp->cbd_sc & TX_BD_R) {
+		};
+		tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W);
+
+		pkt_len = urb->actual_length - epi->sent;
+
+		if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) {
+			pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT);
+		}
+
+		for (x = 0; x < pkt_len; x++) {
+			*((unsigned char *) (tx_cbdp->cbd_bufaddr + x)) =
+				urb->buffer[epi->sent + x];
+		}
+		tx_cbdp->cbd_datlen = pkt_len;
+		tx_cbdp->cbd_sc |= (CBD_TX_BITMASK | ep_ref[ep].pid);
+		__asm__ ("eieio");
+
+#ifdef __SIMULATE_ERROR__
+		if (++err_poison_test == 2) {
+			err_poison_test = 0;
+			tx_cbdp->cbd_sc &= ~TX_BD_TC;
+		}
+#endif
+
+		usbp->uscom = (USCOM_STR | ep);
+
+		while (!(usbp->usber & USB_E_TXB)) {
+			ret = mpc8xx_udc_tx_irq (ep);
+			if (ret == -1) {
+				/* TX timeout */
+				break;
+			} else if (ret == -2) {
+				if (usbp->usber & USB_E_TXB) {
+					usbp->usber |= USB_E_TXB;
+				}
+				mpc8xx_udc_flush_tx_fifo (ep);
+				return -1;
+			}
+		};
+
+		if (usbp->usber & USB_E_TXB) {
+			usbp->usber |= USB_E_TXB;
+		}
+
+		/* ACK must be present <= 18bit times from TX */
+		if (ret == -1) {
+			continue;
+		}
+
+		/* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */
+		epi->sent += pkt_len;
+		epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize);
+		TOGGLE_TX_PID (ep_ref[ep].pid);
+
+		if (epi->sent >= epi->tx_urb->actual_length) {
+
+			epi->tx_urb->actual_length = 0;
+			epi->sent = 0;
+
+			if (ep_ref[ep].sc & EP_SEND_ZLP) {
+				ep_ref[ep].sc &= ~EP_SEND_ZLP;
+			} else {
+				return 0;
+			}
+		}
+	}
+
+	ERR ("TX fail, endpoint 0x%x tx bytes 0x%x/0x%x\n", ep, epi->sent,
+	     epi->tx_urb->actual_length);
+
+	return -1;
+}
+
+/* mpc8xx_udc_dump_request
+ *
+ * Dump a control request to console
+ */
+static void mpc8xx_udc_dump_request (struct usb_device_request *request)
+{
+	DBG ("bmRequestType:%02x bRequest:%02x wValue:%04x "
+	     "wIndex:%04x wLength:%04x ?\n",
+	     request->bmRequestType,
+	     request->bRequest,
+	     request->wValue, request->wIndex, request->wLength);
+
+	return;
+}
+
+/* mpc8xx_udc_ep0_rx_setup
+ *
+ * Decode received ep0 SETUP packet. return non-zero on error
+ */
+static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp)
+{
+	unsigned int x = 0;
+	struct urb *purb = ep_ref[0].urb;
+	struct usb_endpoint_instance *epi =
+		&udc_device->bus->endpoint_array[0];
+
+	for (; x < rx_cbdp->cbd_datlen; x++) {
+		*(((unsigned char *) &ep_ref[0].urb->device_request) + x) =
+			*((unsigned char *) (rx_cbdp->cbd_bufaddr + x));
+	}
+
+	mpc8xx_udc_clear_rxbd (rx_cbdp);
+
+	if (ep0_recv_setup (purb)) {
+		mpc8xx_udc_dump_request (&purb->device_request);
+		return -1;
+	}
+
+	if ((purb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
+	    == USB_REQ_HOST2DEVICE) {
+
+		switch (purb->device_request.bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			/* Send the Status OUT ZLP */
+			ep_ref[0].pid = TX_BD_PID_DATA1;
+			purb->actual_length = 0;
+			mpc8xx_udc_init_tx (epi, purb);
+			mpc8xx_udc_ep_tx (epi);
+
+			/* Move to the addressed state */
+			usbp->usaddr = udc_device->address;
+			mpc8xx_udc_state_transition_up (udc_device->device_state,
+							STATE_ADDRESSED);
+			return 0;
+
+		case USB_REQ_SET_CONFIGURATION:
+			if (!purb->device_request.wValue) {
+				/* Respond at default address */
+				usbp->usaddr = 0x00;
+				mpc8xx_udc_state_transition_down (udc_device->device_state,
+								  STATE_ADDRESSED);
+			} else {
+				/* TODO: Support multiple configurations */
+				mpc8xx_udc_state_transition_up (udc_device->device_state,
+								STATE_CONFIGURED);
+				for (x = 1; x < MAX_ENDPOINTS; x++) {
+					if ((udc_device->bus->endpoint_array[x].endpoint_address & USB_ENDPOINT_DIR_MASK)
+					    == USB_DIR_IN) {
+						ep_ref[x].pid = TX_BD_PID_DATA0;
+					} else {
+						ep_ref[x].pid = RX_BD_PID_DATA0;
+					}
+					/* Set configuration must unstall endpoints */
+					usbp->usep[x] &= ~STALL_BITMASK;
+				}
+			}
+			break;
+		default:
+			/* CDC/Vendor specific */
+			break;
+		}
+
+		/* Send ZLP as ACK in Status OUT phase */
+		ep_ref[0].pid = TX_BD_PID_DATA1;
+		purb->actual_length = 0;
+		mpc8xx_udc_init_tx (epi, purb);
+		mpc8xx_udc_ep_tx (epi);
+
+	} else {
+
+		if (purb->actual_length) {
+			ep_ref[0].pid = TX_BD_PID_DATA1;
+			mpc8xx_udc_init_tx (epi, purb);
+
+			if (!(purb->actual_length % EP0_MAX_PACKET_SIZE)) {
+				ep_ref[0].sc |= EP_SEND_ZLP;
+			}
+
+			if (purb->device_request.wValue ==
+			    USB_DESCRIPTOR_TYPE_DEVICE) {
+				if (le16_to_cpu (purb->device_request.wLength)
+				    > purb->actual_length) {
+					/* Send EP0_MAX_PACKET_SIZE bytes
+					 * unless correct size requested.
+					 */
+					if (purb->actual_length > epi->tx_packetSize) {
+						purb->actual_length = epi->tx_packetSize;
+					}
+				}
+			}
+			mpc8xx_udc_ep_tx (epi);
+
+		} else {
+			/* Corrupt SETUP packet? */
+			ERR ("Zero length data or SETUP with DATA-IN phase ?\n");
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/* mpc8xx_udc_init_tx
+ *
+ * Setup some basic parameters for a TX transaction
+ */
+static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi,
+				struct urb *tx_urb)
+{
+	epi->sent = 0;
+	epi->last = 0;
+	epi->tx_urb = tx_urb;
+}
+
+/* mpc8xx_udc_ep0_rx
+ *
+ * Receive ep0/control USB data. Parse and possibly send a response.
+ */
+static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp)
+{
+	if (rx_cbdp->cbd_sc & RX_BD_PID_SETUP) {
+
+		/* Unconditionally accept SETUP packets */
+		if (mpc8xx_udc_ep0_rx_setup (rx_cbdp)) {
+			mpc8xx_udc_stall (0);
+		}
+
+	} else {
+
+		mpc8xx_udc_clear_rxbd (rx_cbdp);
+
+		if ((rx_cbdp->cbd_datlen - 2)) {
+			/* SETUP with a DATA phase
+			 * outside of SETUP packet.
+			 * Reply with STALL.
+			 */
+			mpc8xx_udc_stall (0);
+		}
+	}
+}
+
+/* mpc8xx_udc_epn_rx
+ *
+ * Receive some data from cbd into USB system urb data abstraction
+ * Upper layers should NAK if there is insufficient RX data space
+ */
+static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp)
+{
+	struct usb_endpoint_instance *epi = 0;
+	struct urb *urb = 0;
+	unsigned int x = 0;
+
+	if (epid >= MAX_ENDPOINTS || !rx_cbdp->cbd_datlen) {
+		return 0;
+	}
+
+	/* USB 2.0 PDF section 8.6.4
+	 * Discard data with invalid PID it is a resend.
+	 */
+	if (ep_ref[epid].pid != (rx_cbdp->cbd_sc & 0xC0)) {
+		return 1;
+	}
+	TOGGLE_RX_PID (ep_ref[epid].pid);
+
+	epi = &udc_device->bus->endpoint_array[epid];
+	urb = epi->rcv_urb;
+
+	for (; x < (rx_cbdp->cbd_datlen - 2); x++) {
+		*((unsigned char *) (urb->buffer + urb->actual_length + x)) =
+			*((unsigned char *) (rx_cbdp->cbd_bufaddr + x));
+	}
+
+	if (x) {
+		usbd_rcv_complete (epi, x, 0);
+		if (ep_ref[epid].urb->status == RECV_ERROR) {
+			DBG ("RX error unset NAK\n");
+			udc_unset_nak (epid);
+		}
+	}
+	return x;
+}
+
+/* mpc8xx_udc_clock_init
+ *
+ * Obtain a clock reference for Full Speed Signaling
+ */
+static void mpc8xx_udc_clock_init (volatile immap_t * immr,
+				   volatile cpm8xx_t * cp)
+{
+
+#if defined(CFG_USB_EXTC_CLK)
+
+	/* This has been tested with a 48MHz crystal on CLK6 */
+	switch (CFG_USB_EXTC_CLK) {
+	case 1:
+		immr->im_ioport.iop_papar |= 0x0100;
+		immr->im_ioport.iop_padir &= ~0x0100;
+		cp->cp_sicr |= 0x24;
+		break;
+	case 2:
+		immr->im_ioport.iop_papar |= 0x0200;
+		immr->im_ioport.iop_padir &= ~0x0200;
+		cp->cp_sicr |= 0x2D;
+		break;
+	case 3:
+		immr->im_ioport.iop_papar |= 0x0400;
+		immr->im_ioport.iop_padir &= ~0x0400;
+		cp->cp_sicr |= 0x36;
+		break;
+	case 4:
+		immr->im_ioport.iop_papar |= 0x0800;
+		immr->im_ioport.iop_padir &= ~0x0800;
+		cp->cp_sicr |= 0x3F;
+		break;
+	default:
+		udc_state = STATE_ERROR;
+		break;
+	}
+
+#elif defined(CFG_USB_BRGCLK)
+
+	/* This has been tested with brgclk == 50MHz */
+	DECLARE_GLOBAL_DATA_PTR;
+	int divisor = 0;
+
+	if (gd->cpu_clk < 48000000L) {
+		ERR ("brgclk is too slow for full-speed USB!\n");
+		udc_state = STATE_ERROR;
+		return;
+	}
+
+	/* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48Mhz)
+	 * but, can /probably/ live with close-ish alternative rates.
+	 */
+	divisor = (gd->cpu_clk / 48000000L) - 1;
+	cp->cp_sicr &= ~0x0000003F;
+
+	switch (CFG_USB_BRGCLK) {
+	case 1:
+		cp->cp_brgc1 |= (divisor | CPM_BRG_EN);
+		cp->cp_sicr &= ~0x2F;
+		break;
+	case 2:
+		cp->cp_brgc2 |= (divisor | CPM_BRG_EN);
+		cp->cp_sicr |= 0x00000009;
+		break;
+	case 3:
+		cp->cp_brgc3 |= (divisor | CPM_BRG_EN);
+		cp->cp_sicr |= 0x00000012;
+		break;
+	case 4:
+		cp->cp_brgc4 = (divisor | CPM_BRG_EN);
+		cp->cp_sicr |= 0x0000001B;
+		break;
+	default:
+		udc_state = STATE_ERROR;
+		break;
+	}
+
+#else
+#error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined"
+#endif
+
+}
+
+/* mpc8xx_udc_cbd_attach
+ *
+ * attach a cbd to and endpoint
+ */
+static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size)
+{
+
+	if (!tx_cbd[ep] || !rx_cbd[ep] || ep >= MAX_ENDPOINTS) {
+		udc_state = STATE_ERROR;
+		return;
+	}
+
+	if (tx_size > USB_MAX_PKT || rx_size > USB_MAX_PKT ||
+	    (!tx_size && !rx_size)) {
+		udc_state = STATE_ERROR;
+		return;
+	}
+
+	/* Attach CBD to appropiate Parameter RAM Endpoint data structure */
+	if (rx_size) {
+		endpoints[ep]->rbase = (u32) rx_cbd[rx_ct];
+		endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
+		rx_ct++;
+
+		if (!ep) {
+
+			endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
+			rx_cbd[rx_ct]->cbd_sc |= RX_BD_W;
+			rx_ct++;
+
+		} else {
+			rx_ct += 2;
+			endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
+			rx_cbd[rx_ct]->cbd_sc |= RX_BD_W;
+			rx_ct++;
+		}
+
+		/* Where we expect to RX data on this endpoint */
+		ep_ref[ep].prx = rx_cbd[rx_ct - 1];
+	} else {
+
+		ep_ref[ep].prx = 0;
+		endpoints[ep]->rbase = 0;
+		endpoints[ep]->rbptr = 0;
+	}
+
+	if (tx_size) {
+		endpoints[ep]->tbase = (u32) tx_cbd[tx_ct];
+		endpoints[ep]->tbptr = (u32) tx_cbd[tx_ct];
+		tx_ct++;
+	} else {
+		endpoints[ep]->tbase = 0;
+		endpoints[ep]->tbptr = 0;
+	}
+
+	endpoints[ep]->tstate = 0;
+	endpoints[ep]->tbcnt = 0;
+	endpoints[ep]->mrblr = EP_MAX_PKT;
+	endpoints[ep]->rfcr = 0x18;
+	endpoints[ep]->tfcr = 0x18;
+	ep_ref[ep].sc |= EP_ATTACHED;
+
+	DBG ("ep %d rbase 0x%08x rbptr 0x%08x tbase 0x%08x tbptr 0x%08x prx = %p\n",
+		ep, endpoints[ep]->rbase, endpoints[ep]->rbptr,
+		endpoints[ep]->tbase, endpoints[ep]->tbptr,
+		ep_ref[ep].prx);
+
+	return;
+}
+
+/* mpc8xx_udc_cbd_init
+ *
+ * Allocate space for a cbd and allocate TX/RX data space
+ */
+static void mpc8xx_udc_cbd_init (void)
+{
+	int i = 0;
+
+	for (; i < TX_RING_SIZE; i++) {
+		tx_cbd[i] = (cbd_t *)
+			mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int));
+	}
+
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		rx_cbd[i] = (cbd_t *)
+			mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int));
+	}
+
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		tx_cbd[i]->cbd_bufaddr =
+			mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int));
+
+		tx_cbd[i]->cbd_sc = (TX_BD_I | TX_BD_W);
+		tx_cbd[i]->cbd_datlen = 0x0000;
+	}
+
+
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		rx_cbd[i]->cbd_bufaddr =
+			mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int));
+		rx_cbd[i]->cbd_sc = (RX_BD_I | RX_BD_E);
+		rx_cbd[i]->cbd_datlen = 0x0000;
+
+	}
+
+	return;
+}
+
+/* mpc8xx_udc_endpoint_init
+ *
+ * Attach an endpoint to some dpram
+ */
+static void mpc8xx_udc_endpoint_init (void)
+{
+	int i = 0;
+
+	for (; i < MAX_ENDPOINTS; i++) {
+		endpoints[i] = (usb_epb_t *)
+			mpc8xx_udc_alloc (sizeof (usb_epb_t), 32);
+	}
+}
+
+/* mpc8xx_udc_alloc
+ *
+ * Grab the address of some dpram
+ */
+static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment)
+{
+	u32 retaddr = address_base;
+
+	while (retaddr % alignment) {
+		retaddr++;
+	}
+	address_base += data_size;
+
+	return retaddr;
+}
+
+#endif /* CONFIG_MPC885_FAMILY && CONFIG_USB_DEVICE) */
diff --git a/drivers/usbdcore_omap1510.c b/drivers/usbdcore_omap1510.c
index 1d54a635755..84bb936d869 100644
--- a/drivers/usbdcore_omap1510.c
+++ b/drivers/usbdcore_omap1510.c
@@ -1517,4 +1517,31 @@ void udc_startup_events (struct usb_device_instance *device)
 	udc_enable (device);
 }
 
+/**
+ * udc_irq - do pseudo interrupts
+ */
+void udc_irq(void)
+{
+	/* Loop while we have interrupts.
+	 * If we don't do this, the input chain
+	 * polling delay is likely to miss
+	 * host requests.
+	 */
+	while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) {
+		/* Handle any new IRQs */
+		omap1510_udc_irq ();
+		omap1510_udc_noniso_irq ();
+	}
+}
+
+/* Flow control */
+void udc_set_nak(int epid)
+{
+	/* TODO: implement this functionality in omap1510 */
+}
+
+void udc_unset_nak (int epid)
+{
+	/* TODO: implement this functionality in omap1510 */
+}
 #endif
diff --git a/drivers/usbtty.c b/drivers/usbtty.c
index ce4a12e16e0..d41a00b8cf4 100644
--- a/drivers/usbtty.c
+++ b/drivers/usbtty.c
@@ -2,6 +2,9 @@
  * (C) Copyright 2003
  * Gerry Hamel, geh@ti.com, Texas Instruments
  *
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, bodonoghue@codehermit.ie
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -25,20 +28,42 @@
 #include <circbuf.h>
 #include <devices.h>
 #include "usbtty.h"
+#include "usb_cdc_acm.h"
+#include "usbdescriptors.h"
+#include <config.h>		/* If defined, override Linux identifiers with
+			   	 * vendor specific ones */
 
 #if 0
-#define TTYDBG(fmt,args...) serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
+#define TTYDBG(fmt,args...)\
+	serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
 #else
 #define TTYDBG(fmt,args...) do{}while(0)
 #endif
 
-#if 0
-#define TTYERR(fmt,args...) serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
+#if 1
+#define TTYERR(fmt,args...)\
+	serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,\
+	__LINE__,##args)
 #else
 #define TTYERR(fmt,args...) do{}while(0)
 #endif
 
 /*
+ * Defines
+ */
+#define NUM_CONFIGS    1
+#define MAX_INTERFACES 2
+#define NUM_ENDPOINTS  3
+#define ACM_TX_ENDPOINT 3
+#define ACM_RX_ENDPOINT 2
+#define GSERIAL_TX_ENDPOINT 2
+#define GSERIAL_RX_ENDPOINT 1
+#define NUM_ACM_INTERFACES 2
+#define NUM_GSERIAL_INTERFACES 1
+#define CONFIG_USBD_DATA_INTERFACE_STR "Bulk Data Interface"
+#define CONFIG_USBD_CTRL_INTERFACE_STR "Control Interface"
+
+/*
  * Buffers to hold input and output data
  */
 #define USBTTY_BUFFER_SIZE 256
@@ -50,157 +75,336 @@ static circbuf_t usbtty_output;
  * Instance variables
  */
 static device_t usbttydev;
-static struct usb_device_instance	 device_instance[1];
-static struct usb_bus_instance		 bus_instance[1];
+static struct usb_device_instance device_instance[1];
+static struct usb_bus_instance bus_instance[1];
 static struct usb_configuration_instance config_instance[NUM_CONFIGS];
-static struct usb_interface_instance	 interface_instance[NUM_INTERFACES];
-static struct usb_alternate_instance	 alternate_instance[NUM_INTERFACES];
-static struct usb_endpoint_instance	 endpoint_instance[NUM_ENDPOINTS+1]; /* one extra for control endpoint */
-
-/*
- * Static allocation of urbs
- */
-#define RECV_ENDPOINT 1
-#define TX_ENDPOINT 2
+static struct usb_interface_instance interface_instance[MAX_INTERFACES];
+static struct usb_alternate_instance alternate_instance[MAX_INTERFACES];
+/* one extra for control endpoint */
+static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1];
 
 /*
  * Global flag
  */
 int usbtty_configured_flag = 0;
 
-
 /*
  * Serial number
  */
 static char serial_number[16];
 
+
 /*
- * Descriptors
+ * Descriptors, Strings, Local variables.
  */
+
+/* defined and used by usbdcore_ep0.c */
+extern struct usb_string_descriptor **usb_strings;
+
+/* Indicies, References */
+static unsigned short rx_endpoint = 0;
+static unsigned short tx_endpoint = 0;
+static unsigned short interface_count = 0;
+static struct usb_string_descriptor *usbtty_string_table[STR_COUNT];
+
+/* USB Descriptor Strings */
 static u8 wstrLang[4] = {4,USB_DT_STRING,0x9,0x4};
 static u8 wstrManufacturer[2 + 2*(sizeof(CONFIG_USBD_MANUFACTURER)-1)];
 static u8 wstrProduct[2 + 2*(sizeof(CONFIG_USBD_PRODUCT_NAME)-1)];
 static u8 wstrSerial[2 + 2*(sizeof(serial_number) - 1)];
 static u8 wstrConfiguration[2 + 2*(sizeof(CONFIG_USBD_CONFIGURATION_STR)-1)];
-static u8 wstrInterface[2 + 2*(sizeof(CONFIG_USBD_INTERFACE_STR)-1)];
-
-static struct usb_string_descriptor *usbtty_string_table[] = {
-  (struct usb_string_descriptor*)wstrLang,
-  (struct usb_string_descriptor*)wstrManufacturer,
-  (struct usb_string_descriptor*)wstrProduct,
-  (struct usb_string_descriptor*)wstrSerial,
-  (struct usb_string_descriptor*)wstrConfiguration,
-  (struct usb_string_descriptor*)wstrInterface
-};
-extern struct usb_string_descriptor **usb_strings; /* defined and used by omap1510_ep0.c */
+static u8 wstrDataInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
+static u8 wstrCtrlInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
 
+/* Standard USB Data Structures */
+static struct usb_interface_descriptor interface_descriptors[MAX_INTERFACES];
+static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS];
+static struct usb_configuration_descriptor	*configuration_descriptor = 0;
 static struct usb_device_descriptor device_descriptor = {
-  bLength:	      sizeof(struct usb_device_descriptor),
-  bDescriptorType:    USB_DT_DEVICE,
-  bcdUSB:	      USB_BCD_VERSION,
-  bDeviceClass:	      USBTTY_DEVICE_CLASS,
-  bDeviceSubClass:    USBTTY_DEVICE_SUBCLASS,
-  bDeviceProtocol:    USBTTY_DEVICE_PROTOCOL,
-  bMaxPacketSize0:    EP0_MAX_PACKET_SIZE,
-  idVendor:	      CONFIG_USBD_VENDORID,
-  idProduct:	      CONFIG_USBD_PRODUCTID,
-  bcdDevice:	      USBTTY_BCD_DEVICE,
-  iManufacturer:      STR_MANUFACTURER,
-  iProduct:	      STR_PRODUCT,
-  iSerialNumber:      STR_SERIAL,
-  bNumConfigurations: NUM_CONFIGS
-  };
-static struct usb_configuration_descriptor config_descriptors[NUM_CONFIGS] = {
-  {
-    bLength:		 sizeof(struct usb_configuration_descriptor),
-    bDescriptorType:	 USB_DT_CONFIG,
-    wTotalLength:	 (sizeof(struct usb_configuration_descriptor)*NUM_CONFIGS) +
-			 (sizeof(struct usb_interface_descriptor)*NUM_INTERFACES) +
-			 (sizeof(struct usb_endpoint_descriptor)*NUM_ENDPOINTS),
-    bNumInterfaces:	 NUM_INTERFACES,
-    bConfigurationValue: 1,
-    iConfiguration:	 STR_CONFIG,
-    bmAttributes:	 BMATTRIBUTE_SELF_POWERED | BMATTRIBUTE_RESERVED,
-    bMaxPower:		 USBTTY_MAXPOWER
-  },
-};
-static struct usb_interface_descriptor interface_descriptors[NUM_INTERFACES] = {
-  {
-    bLength:		 sizeof(struct usb_interface_descriptor),
-    bDescriptorType:	 USB_DT_INTERFACE,
-    bInterfaceNumber:	 0,
-    bAlternateSetting:	 0,
-    bNumEndpoints:	 NUM_ENDPOINTS,
-    bInterfaceClass:	 USBTTY_INTERFACE_CLASS,
-    bInterfaceSubClass:	 USBTTY_INTERFACE_SUBCLASS,
-    bInterfaceProtocol:	 USBTTY_INTERFACE_PROTOCOL,
-    iInterface:		 STR_INTERFACE
-  },
+	.bLength = sizeof(struct usb_device_descriptor),
+	.bDescriptorType =	USB_DT_DEVICE,
+	.bcdUSB = 		cpu_to_le16(USB_BCD_VERSION),
+	.bDeviceSubClass =	0x00,
+	.bDeviceProtocol =	0x00,
+	.bMaxPacketSize0 =	EP0_MAX_PACKET_SIZE,
+	.idVendor =		cpu_to_le16(CONFIG_USBD_VENDORID),
+	.bcdDevice =		cpu_to_le16(USBTTY_BCD_DEVICE),
+	.iManufacturer =	STR_MANUFACTURER,
+	.iProduct =		STR_PRODUCT,
+	.iSerialNumber =	STR_SERIAL,
+	.bNumConfigurations =	NUM_CONFIGS
 };
-static struct usb_endpoint_descriptor ep_descriptors[NUM_ENDPOINTS] = {
-  {
-    bLength:		 sizeof(struct usb_endpoint_descriptor),
-    bDescriptorType:	 USB_DT_ENDPOINT,
-    bEndpointAddress:	 CONFIG_USBD_SERIAL_OUT_ENDPOINT | USB_DIR_OUT,
-    bmAttributes:	 USB_ENDPOINT_XFER_BULK,
-    wMaxPacketSize:	 CONFIG_USBD_SERIAL_OUT_PKTSIZE,
-    bInterval:		 0
-  },
-  {
-    bLength:		 sizeof(struct usb_endpoint_descriptor),
-    bDescriptorType:	 USB_DT_ENDPOINT,
-    bEndpointAddress:	 CONFIG_USBD_SERIAL_IN_ENDPOINT | USB_DIR_IN,
-    bmAttributes:	 USB_ENDPOINT_XFER_BULK,
-    wMaxPacketSize:	 CONFIG_USBD_SERIAL_IN_PKTSIZE,
-    bInterval:		 0
-  },
-  {
-    bLength:		 sizeof(struct usb_endpoint_descriptor),
-    bDescriptorType:	 USB_DT_ENDPOINT,
-    bEndpointAddress:	 CONFIG_USBD_SERIAL_INT_ENDPOINT | USB_DIR_IN,
-    bmAttributes:	 USB_ENDPOINT_XFER_INT,
-    wMaxPacketSize:	 CONFIG_USBD_SERIAL_INT_PKTSIZE,
-    bInterval:		 0
-  },
+
+
+/*
+ * Static CDC ACM specific descriptors
+ */
+
+struct acm_config_desc {
+	struct usb_configuration_descriptor configuration_desc;
+
+	/* Master Interface */
+	struct usb_interface_descriptor interface_desc;
+
+	struct usb_class_header_function_descriptor usb_class_header;
+	struct usb_class_call_management_descriptor usb_class_call_mgt;
+	struct usb_class_abstract_control_descriptor usb_class_acm;
+	struct usb_class_union_function_descriptor usb_class_union;
+	struct usb_endpoint_descriptor notification_endpoint;
+
+	/* Slave Interface */
+	struct usb_interface_descriptor data_class_interface;
+	struct usb_endpoint_descriptor
+		data_endpoints[NUM_ENDPOINTS-1] __attribute__((packed));
+} __attribute__((packed));
+
+static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = {
+	{
+		.configuration_desc ={
+			.bLength =
+				sizeof(struct usb_configuration_descriptor),
+    			.bDescriptorType = USB_DT_CONFIG,
+			.wTotalLength =
+				cpu_to_le16(sizeof(struct acm_config_desc)),
+	    		.bNumInterfaces = NUM_ACM_INTERFACES,
+    			.bConfigurationValue = 1,
+			.iConfiguration = STR_CONFIG,
+			.bmAttributes =
+				BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
+			.bMaxPower = USBTTY_MAXPOWER
+		},
+		/* Interface 1 */
+		.interface_desc = {
+			.bLength  = sizeof(struct usb_interface_descriptor),
+			.bDescriptorType = USB_DT_INTERFACE,
+			.bInterfaceNumber = 0,
+			.bAlternateSetting = 0,
+			.bNumEndpoints = 0x01,
+			.bInterfaceClass =
+				COMMUNICATIONS_INTERFACE_CLASS_CONTROL,
+			.bInterfaceSubClass = COMMUNICATIONS_ACM_SUBCLASS,
+			.bInterfaceProtocol = COMMUNICATIONS_V25TER_PROTOCOL,
+			.iInterface = STR_CTRL_INTERFACE,
+		},
+		.usb_class_header = {
+			.bFunctionLength	=
+				sizeof(struct usb_class_header_function_descriptor),
+			.bDescriptorType	= CS_INTERFACE,
+			.bDescriptorSubtype	= USB_ST_HEADER,
+			.bcdCDC	= cpu_to_le16(110),
+		},
+		.usb_class_call_mgt = {
+			.bFunctionLength	=
+				sizeof(struct usb_class_call_management_descriptor),
+			.bDescriptorType	= CS_INTERFACE,
+			.bDescriptorSubtype	= USB_ST_CMF,
+			.bmCapabilities		= 0x00,
+			.bDataInterface		= 0x01,
+		},
+		.usb_class_acm = {
+			.bFunctionLength	=
+				sizeof(struct usb_class_abstract_control_descriptor),
+			.bDescriptorType	= CS_INTERFACE,
+			.bDescriptorSubtype	= USB_ST_ACMF,
+			.bmCapabilities		= 0x00,
+		},
+		.usb_class_union = {
+			.bFunctionLength	=
+				sizeof(struct usb_class_union_function_descriptor),
+			.bDescriptorType	= CS_INTERFACE,
+			.bDescriptorSubtype	= USB_ST_UF,
+			.bMasterInterface	= 0x00,
+			.bSlaveInterface0	= 0x01,
+		},
+		.notification_endpoint = {
+			.bLength =
+				sizeof(struct usb_endpoint_descriptor),
+			.bDescriptorType	= USB_DT_ENDPOINT,
+			.bEndpointAddress	= 0x01 | USB_DIR_IN,
+			.bmAttributes		= USB_ENDPOINT_XFER_INT,
+			.wMaxPacketSize
+				= cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
+			.bInterval		= 0xFF,
+		},
+
+		/* Interface 2 */
+		.data_class_interface = {
+			.bLength		=
+				sizeof(struct usb_interface_descriptor),
+			.bDescriptorType	= USB_DT_INTERFACE,
+			.bInterfaceNumber	= 0x01,
+			.bAlternateSetting	= 0x00,
+			.bNumEndpoints		= 0x02,
+			.bInterfaceClass	=
+				COMMUNICATIONS_INTERFACE_CLASS_DATA,
+			.bInterfaceSubClass	= DATA_INTERFACE_SUBCLASS_NONE,
+			.bInterfaceProtocol	= DATA_INTERFACE_PROTOCOL_NONE,
+			.iInterface		= STR_DATA_INTERFACE,
+		},
+		.data_endpoints = {
+			{
+				.bLength		=
+					sizeof(struct usb_endpoint_descriptor),
+				.bDescriptorType	= USB_DT_ENDPOINT,
+				.bEndpointAddress	= 0x02 | USB_DIR_OUT,
+				.bmAttributes		=
+					USB_ENDPOINT_XFER_BULK,
+				.wMaxPacketSize		=
+					cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
+				.bInterval		= 0xFF,
+			},
+			{
+				.bLength		=
+					sizeof(struct usb_endpoint_descriptor),
+				.bDescriptorType	= USB_DT_ENDPOINT,
+				.bEndpointAddress	= 0x03 | USB_DIR_IN,
+				.bmAttributes		=
+					USB_ENDPOINT_XFER_BULK,
+				.wMaxPacketSize		=
+					cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
+				.bInterval		= 0xFF,
+			},
+		},
+	},
 };
-static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS] = {
-  &(ep_descriptors[0]),
-  &(ep_descriptors[1]),
-  &(ep_descriptors[2]),
+
+static struct rs232_emu rs232_desc={
+		.dter 		=  	115200,
+	   	.stop_bits	=	0x00,
+	   	.parity		=	0x00,
+		.data_bits	=	0x08
 };
 
-/* utility function for converting char* to wide string used by USB */
-static void str2wide (char *str, u16 * wide)
-{
-	int i;
 
-	for (i = 0; i < strlen (str) && str[i]; i++)
-		wide[i] = (u16) str[i];
-}
+/*
+ * Static Generic Serial specific data
+ */
+
+
+struct gserial_config_desc {
+
+	struct usb_configuration_descriptor configuration_desc;
+	struct usb_interface_descriptor
+		interface_desc[NUM_GSERIAL_INTERFACES] __attribute__((packed));
+	struct usb_endpoint_descriptor
+		data_endpoints[NUM_ENDPOINTS] __attribute__((packed));
+
+} __attribute__((packed));
+
+static struct gserial_config_desc
+gserial_configuration_descriptors[NUM_CONFIGS] ={
+	{
+		.configuration_desc ={
+			.bLength = sizeof(struct usb_configuration_descriptor),
+			.bDescriptorType = USB_DT_CONFIG,
+			.wTotalLength =
+				cpu_to_le16(sizeof(struct gserial_config_desc)),
+			.bNumInterfaces = NUM_GSERIAL_INTERFACES,
+			.bConfigurationValue = 1,
+			.iConfiguration = STR_CONFIG,
+			.bmAttributes =
+				BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
+			.bMaxPower = USBTTY_MAXPOWER
+		},
+		.interface_desc = {
+			{
+				.bLength  =
+					sizeof(struct usb_interface_descriptor),
+				.bDescriptorType = USB_DT_INTERFACE,
+				.bInterfaceNumber = 0,
+				.bAlternateSetting = 0,
+				.bNumEndpoints = NUM_ENDPOINTS,
+				.bInterfaceClass =
+					COMMUNICATIONS_INTERFACE_CLASS_VENDOR,
+				.bInterfaceSubClass =
+					COMMUNICATIONS_NO_SUBCLASS,
+				.bInterfaceProtocol =
+					COMMUNICATIONS_NO_PROTOCOL,
+				.iInterface = STR_DATA_INTERFACE
+			},
+  		},
+		.data_endpoints  = {
+			{
+				.bLength =
+					sizeof(struct usb_endpoint_descriptor),
+				.bDescriptorType =	USB_DT_ENDPOINT,
+				.bEndpointAddress =	0x01 | USB_DIR_OUT,
+				.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+				.wMaxPacketSize =
+					cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE),
+				.bInterval=		0xFF,
+			},
+			{
+				.bLength =
+					sizeof(struct usb_endpoint_descriptor),
+				.bDescriptorType =	USB_DT_ENDPOINT,
+				.bEndpointAddress =	0x02 | USB_DIR_IN,
+				.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+				.wMaxPacketSize =
+					cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE),
+				.bInterval = 		0xFF,
+			},
+			{
+				.bLength =
+					sizeof(struct usb_endpoint_descriptor),
+				.bDescriptorType =	USB_DT_ENDPOINT,
+				.bEndpointAddress =	0x03 | USB_DIR_IN,
+				.bmAttributes =		USB_ENDPOINT_XFER_INT,
+    				.wMaxPacketSize =
+					cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
+				.bInterval =		0xFF,
+			},
+		},
+	},
+};
 
 /*
- * Prototypes
+ * Static Function Prototypes
  */
+
 static void usbtty_init_strings (void);
 static void usbtty_init_instances (void);
 static void usbtty_init_endpoints (void);
-
+static void usbtty_init_terminal_type(short type);
 static void usbtty_event_handler (struct usb_device_instance *device,
-				  usb_device_event_t event, int data);
+				usb_device_event_t event, int data);
+static int usbtty_cdc_setup(struct usb_device_request *request,
+				struct urb *urb);
 static int usbtty_configured (void);
-
 static int write_buffer (circbuf_t * buf);
 static int fill_buffer (circbuf_t * buf);
 
 void usbtty_poll (void);
-static void pretend_interrupts (void);
 
+/* utility function for converting char* to wide string used by USB */
+static void str2wide (char *str, u16 * wide)
+{
+	int i;
+	for (i = 0; i < strlen (str) && str[i]; i++){
+		#if defined(__LITTLE_ENDIAN__)
+			wide[i] = (u16) str[i];
+		#elif defined(__BIG_ENDIAN__)
+			wide[i] = ((u16)(str[i])<<8);
+		#else
+			#error "__LITTLE_ENDIAN__ or __BIG_ENDIAN__ undefined"
+		#endif
+	}
+}
 
 /*
  * Test whether a character is in the RX buffer
  */
+
 int usbtty_tstc (void)
 {
+	struct usb_endpoint_instance *endpoint =
+		&endpoint_instance[rx_endpoint];
+
+	/* If no input data exists, allow more RX to be accepted */
+	if(usbtty_input.size <= 0){
+		udc_unset_nak(endpoint->endpoint_address&0x03);
+	}
+
 	usbtty_poll ();
 	return (usbtty_input.size > 0);
 }
@@ -210,15 +414,21 @@ int usbtty_tstc (void)
  * otherwise. When the function is succesfull, the character read is
  * written into its argument c.
  */
+
 int usbtty_getc (void)
 {
 	char c;
+	struct usb_endpoint_instance *endpoint =
+		&endpoint_instance[rx_endpoint];
 
 	while (usbtty_input.size <= 0) {
+		udc_unset_nak(endpoint->endpoint_address&0x03);
 		usbtty_poll ();
 	}
 
 	buf_pop (&usbtty_input, &c, 1);
+	udc_set_nak(endpoint->endpoint_address&0x03);
+
 	return c;
 }
 
@@ -238,7 +448,6 @@ void usbtty_putc (const char c)
 	}
 }
 
-
 /* usbtty_puts() helper function for finding the next '\n' in a string */
 static int next_nl_pos (const char *s)
 {
@@ -252,8 +461,9 @@ static int next_nl_pos (const char *s)
 }
 
 /*
- * Output a string to the usb client port.
+ * Output a string to the usb client port - implementing flow control
  */
+
 static void __usbtty_puts (const char *str, int len)
 {
 	int maxlen = usbtty_output.totalsize;
@@ -261,22 +471,19 @@ static void __usbtty_puts (const char *str, int len)
 
 	/* break str into chunks < buffer size, if needed */
 	while (len > 0) {
-		space = maxlen - usbtty_output.size;
+		usbtty_poll ();
 
+		space = maxlen - usbtty_output.size;
 		/* Empty buffer here, if needed, to ensure space... */
-		if (space <= 0) {
+		if (space) {
 			write_buffer (&usbtty_output);
-			space = maxlen - usbtty_output.size;
-			if (space <= 0) {
-				space = len;	/* allow old data to be overwritten. */
-			}
-		}
 
-		n = MIN (space, MIN (len, maxlen));
-		buf_push (&usbtty_output, str, n);
+			n = MIN (space, MIN (len, maxlen));
+			buf_push (&usbtty_output, str, n);
 
-		str += n;
-		len -= n;
+			str += n;
+			len -= n;
+		}
 	}
 }
 
@@ -313,8 +520,10 @@ int drv_usbtty_init (void)
 {
 	int rc;
 	char * sn;
+	char * tt;
 	int snlen;
 
+	/* Ger seiral number */
 	if (!(sn = getenv("serial#"))) {
 		sn = "000000000000";
 	}
@@ -327,6 +536,14 @@ int drv_usbtty_init (void)
 	memcpy (serial_number, sn, snlen);
 	serial_number[snlen] = '\0';
 
+	/* Decide on which type of UDC device to be.
+	 */
+
+	if(!(tt = getenv("usbtty"))) {
+		tt = "generic";
+	}
+	usbtty_init_terminal_type(strcmp(tt,"cdc_acm"));
+
 	/* prepare buffers... */
 	buf_init (&usbtty_input, USBTTY_BUFFER_SIZE);
 	buf_init (&usbtty_output, USBTTY_BUFFER_SIZE);
@@ -337,7 +554,7 @@ int drv_usbtty_init (void)
 	usbtty_init_strings ();
 	usbtty_init_instances ();
 
-	udc_startup_events (device_instance);	/* Enable our device, initialize udc pointers */
+	udc_startup_events (device_instance);/* Enable dev, init udc pointers */
 	udc_connect ();		/* Enable pullup for host detection */
 
 	usbtty_init_endpoints ();
@@ -362,30 +579,48 @@ static void usbtty_init_strings (void)
 {
 	struct usb_string_descriptor *string;
 
+	usbtty_string_table[STR_LANG] =
+		(struct usb_string_descriptor*)wstrLang;
+
 	string = (struct usb_string_descriptor *) wstrManufacturer;
-	string->bLength = sizeof (wstrManufacturer);
+	string->bLength = sizeof(wstrManufacturer);
 	string->bDescriptorType = USB_DT_STRING;
 	str2wide (CONFIG_USBD_MANUFACTURER, string->wData);
+	usbtty_string_table[STR_MANUFACTURER]=string;
+
 
 	string = (struct usb_string_descriptor *) wstrProduct;
-	string->bLength = sizeof (wstrProduct);
+	string->bLength = sizeof(wstrProduct);
 	string->bDescriptorType = USB_DT_STRING;
 	str2wide (CONFIG_USBD_PRODUCT_NAME, string->wData);
+	usbtty_string_table[STR_PRODUCT]=string;
+
 
 	string = (struct usb_string_descriptor *) wstrSerial;
-	string->bLength = 2 + 2*strlen(serial_number);
+	string->bLength = sizeof(serial_number);
 	string->bDescriptorType = USB_DT_STRING;
 	str2wide (serial_number, string->wData);
+	usbtty_string_table[STR_SERIAL]=string;
+
 
 	string = (struct usb_string_descriptor *) wstrConfiguration;
-	string->bLength = sizeof (wstrConfiguration);
+	string->bLength = sizeof(wstrConfiguration);
 	string->bDescriptorType = USB_DT_STRING;
 	str2wide (CONFIG_USBD_CONFIGURATION_STR, string->wData);
+	usbtty_string_table[STR_CONFIG]=string;
 
-	string = (struct usb_string_descriptor *) wstrInterface;
-	string->bLength = sizeof (wstrInterface);
+
+	string = (struct usb_string_descriptor *) wstrDataInterface;
+	string->bLength = sizeof(wstrDataInterface);
 	string->bDescriptorType = USB_DT_STRING;
-	str2wide (CONFIG_USBD_INTERFACE_STR, string->wData);
+	str2wide (CONFIG_USBD_DATA_INTERFACE_STR, string->wData);
+	usbtty_string_table[STR_DATA_INTERFACE]=string;
+
+	string = (struct usb_string_descriptor *) wstrCtrlInterface;
+	string->bLength = sizeof(wstrCtrlInterface);
+	string->bDescriptorType = USB_DT_STRING;
+	str2wide (CONFIG_USBD_CTRL_INTERFACE_STR, string->wData);
+	usbtty_string_table[STR_CTRL_INTERFACE]=string;
 
 	/* Now, initialize the string table for ep0 handling */
 	usb_strings = usbtty_string_table;
@@ -400,6 +635,7 @@ static void usbtty_init_instances (void)
 	device_instance->device_state = STATE_INIT;
 	device_instance->device_descriptor = &device_descriptor;
 	device_instance->event = usbtty_event_handler;
+	device_instance->cdc_recv_setup = usbtty_cdc_setup;
 	device_instance->bus = bus_instance;
 	device_instance->configurations = NUM_CONFIGS;
 	device_instance->configuration_instance_array = config_instance;
@@ -415,8 +651,8 @@ static void usbtty_init_instances (void)
 	/* configuration instance */
 	memset (config_instance, 0,
 		sizeof (struct usb_configuration_instance));
-	config_instance->interfaces = NUM_INTERFACES;
-	config_instance->configuration_descriptor = config_descriptors;
+	config_instance->interfaces = interface_count;
+	config_instance->configuration_descriptor = configuration_descriptor;
 	config_instance->interface_instance_array = interface_instance;
 
 	/* interface instance */
@@ -447,17 +683,22 @@ static void usbtty_init_instances (void)
 			sizeof (struct usb_endpoint_instance));
 
 		endpoint_instance[i].endpoint_address =
-			ep_descriptors[i - 1].bEndpointAddress;
+			ep_descriptor_ptrs[i - 1]->bEndpointAddress;
 
-		endpoint_instance[i].rcv_packetSize =
-			ep_descriptors[i - 1].wMaxPacketSize;
 		endpoint_instance[i].rcv_attributes =
-			ep_descriptors[i - 1].bmAttributes;
+			ep_descriptor_ptrs[i - 1]->bmAttributes;
+
+		endpoint_instance[i].rcv_packetSize =
+			le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
+
+		endpoint_instance[i].tx_attributes =
+			ep_descriptor_ptrs[i - 1]->bmAttributes;
 
 		endpoint_instance[i].tx_packetSize =
-			ep_descriptors[i - 1].wMaxPacketSize;
+			le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
+
 		endpoint_instance[i].tx_attributes =
-			ep_descriptors[i - 1].bmAttributes;
+			ep_descriptor_ptrs[i - 1]->bmAttributes;
 
 		urb_link_init (&endpoint_instance[i].rcv);
 		urb_link_init (&endpoint_instance[i].rdy);
@@ -480,13 +721,79 @@ static void usbtty_init_endpoints (void)
 	int i;
 
 	bus_instance->max_endpoints = NUM_ENDPOINTS + 1;
-	for (i = 0; i <= NUM_ENDPOINTS; i++) {
+	for (i = 1; i <= NUM_ENDPOINTS; i++) {
 		udc_setup_ep (device_instance, i, &endpoint_instance[i]);
 	}
 }
 
+/* usbtty_init_terminal_type
+ *
+ * Do some late binding for our device type.
+ */
+static void usbtty_init_terminal_type(short type)
+{
+	switch(type){
+		/* CDC ACM */
+		case 0:
+			/* Assign endpoint descriptors */
+			ep_descriptor_ptrs[0] =
+				&acm_configuration_descriptors[0].notification_endpoint;
+			ep_descriptor_ptrs[1] =
+				&acm_configuration_descriptors[0].data_endpoints[0];
+			ep_descriptor_ptrs[2] =
+				&acm_configuration_descriptors[0].data_endpoints[1];
+
+			/* Enumerate Device Descriptor */
+			device_descriptor.bDeviceClass =
+				COMMUNICATIONS_DEVICE_CLASS;
+			device_descriptor.idProduct =
+				cpu_to_le16(CONFIG_USBD_PRODUCTID_CDCACM);
+
+			/* Assign endpoint indices */
+			tx_endpoint = ACM_TX_ENDPOINT;
+			rx_endpoint = ACM_RX_ENDPOINT;
+
+			/* Configuration Descriptor */
+			configuration_descriptor =
+				(struct usb_configuration_descriptor*)
+				&acm_configuration_descriptors;
+
+			/* Interface count */
+			interface_count = NUM_ACM_INTERFACES;
+		break;
+
+		/* BULK IN/OUT & Default */
+		case 1:
+		default:
+			/* Assign endpoint descriptors */
+			ep_descriptor_ptrs[0] =
+				&gserial_configuration_descriptors[0].data_endpoints[0];
+			ep_descriptor_ptrs[1] =
+				&gserial_configuration_descriptors[0].data_endpoints[1];
+			ep_descriptor_ptrs[2] =
+				&gserial_configuration_descriptors[0].data_endpoints[2];
+
+			/* Enumerate Device Descriptor */
+			device_descriptor.bDeviceClass = 0xFF;
+			device_descriptor.idProduct =
+				cpu_to_le16(CONFIG_USBD_PRODUCTID_GSERIAL);
+
+			/* Assign endpoint indices */
+			tx_endpoint = GSERIAL_TX_ENDPOINT;
+			rx_endpoint = GSERIAL_RX_ENDPOINT;
+
+			/* Configuration Descriptor */
+			configuration_descriptor =
+				(struct usb_configuration_descriptor*)
+				&gserial_configuration_descriptors;
+
+			/* Interface count */
+			interface_count = NUM_GSERIAL_INTERFACES;
+		break;
+	}
+}
 
-/*********************************************************************************/
+/******************************************************************************/
 
 static struct urb *next_urb (struct usb_device_instance *device,
 			     struct usb_endpoint_instance *endpoint)
@@ -526,27 +833,39 @@ static int write_buffer (circbuf_t * buf)
 		return 0;
 	}
 
-	if (buf->size) {
+	struct usb_endpoint_instance *endpoint =
+			&endpoint_instance[tx_endpoint];
+	struct urb *current_urb = NULL;
 
-		struct usb_endpoint_instance *endpoint =
-			&endpoint_instance[TX_ENDPOINT];
-		struct urb *current_urb = NULL;
+	current_urb = next_urb (device_instance, endpoint);
+	/* TX data still exists - send it now
+	 */
+	if(endpoint->sent < current_urb->actual_length){
+		if(udc_endpoint_write (endpoint)){
+			/* Write pre-empted by RX */
+			return -1;
+		}
+	}
+
+	if (buf->size) {
 		char *dest;
 
 		int space_avail;
 		int popnum, popped;
 		int total = 0;
 
-		/* Break buffer into urb sized pieces, and link each to the endpoint */
+		/* Break buffer into urb sized pieces,
+		 * and link each to the endpoint
+		 */
 		while (buf->size > 0) {
-			current_urb = next_urb (device_instance, endpoint);
+
 			if (!current_urb) {
 				TTYERR ("current_urb is NULL, buf->size %d\n",
 					buf->size);
 				return total;
 			}
 
-			dest = current_urb->buffer +
+			dest = (char*)current_urb->buffer +
 				current_urb->actual_length;
 
 			space_avail =
@@ -562,14 +881,19 @@ static int write_buffer (circbuf_t * buf)
 			current_urb->actual_length += popped;
 			total += popped;
 
-			/* If endpoint->last == 0, then transfers have not started on this endpoint */
+			/* If endpoint->last == 0, then transfers have
+			 * not started on this endpoint
+			 */
 			if (endpoint->last == 0) {
-				udc_endpoint_write (endpoint);
+				if(udc_endpoint_write (endpoint)){
+					/* Write pre-empted by RX */
+					return -1;
+				}
 			}
 
-		}		/* end while */
+		}/* end while */
 		return total;
-	}			/* end if tx_urb */
+	}
 
 	return 0;
 }
@@ -577,18 +901,22 @@ static int write_buffer (circbuf_t * buf)
 static int fill_buffer (circbuf_t * buf)
 {
 	struct usb_endpoint_instance *endpoint =
-		&endpoint_instance[RECV_ENDPOINT];
+		&endpoint_instance[rx_endpoint];
 
 	if (endpoint->rcv_urb && endpoint->rcv_urb->actual_length) {
-		unsigned int nb = endpoint->rcv_urb->actual_length;
+		unsigned int nb = 0;
 		char *src = (char *) endpoint->rcv_urb->buffer;
+		unsigned int rx_avail = buf->totalsize - buf->size;
+
+		if(rx_avail >= endpoint->rcv_urb->actual_length){
 
-		buf_push (buf, src, nb);
-		endpoint->rcv_urb->actual_length = 0;
+			nb = endpoint->rcv_urb->actual_length;
+			buf_push (buf, src, nb);
+			endpoint->rcv_urb->actual_length = 0;
 
+		}
 		return nb;
 	}
-
 	return 0;
 }
 
@@ -597,7 +925,7 @@ static int usbtty_configured (void)
 	return usbtty_configured_flag;
 }
 
-/*********************************************************************************/
+/******************************************************************************/
 
 static void usbtty_event_handler (struct usb_device_instance *device,
 				  usb_device_event_t event, int data)
@@ -619,8 +947,34 @@ static void usbtty_event_handler (struct usb_device_instance *device,
 	}
 }
 
-/*********************************************************************************/
+/******************************************************************************/
+
+int usbtty_cdc_setup(struct usb_device_request *request, struct urb *urb)
+{
+	switch (request->bRequest){
+
+	   	case ACM_SET_CONTROL_LINE_STATE:	/* Implies DTE ready */
+			break;
+	   	case ACM_SEND_ENCAPSULATED_COMMAND :	/* Required */
+			break;
+		case ACM_SET_LINE_ENCODING :		/* DTE stop/parity bits
+							 * per character */
+			break;
+	   	case ACM_GET_ENCAPSULATED_RESPONSE :	/* request response */
+			break;
+		case ACM_GET_LINE_ENCODING :		/* request DTE rate,
+							 * stop/parity bits */
+			memcpy (urb->buffer , &rs232_desc, sizeof(rs232_desc));
+			urb->actual_length = sizeof(rs232_desc);
+
+			break;
+	 	default:
+			return 1;
+	}
+	return 0;
+}
 
+/******************************************************************************/
 
 /*
  * Since interrupt handling has not yet been implemented, we use this function
@@ -630,36 +984,29 @@ static void usbtty_event_handler (struct usb_device_instance *device,
 void usbtty_poll (void)
 {
 	/* New interrupts? */
-	pretend_interrupts ();
+	udc_irq();
 
-	/* Write any output data to host buffer (do this before checking interrupts to avoid missing one) */
+	/* Write any output data to host buffer
+	 * (do this before checking interrupts to avoid missing one)
+	 */
 	if (usbtty_configured ()) {
 		write_buffer (&usbtty_output);
 	}
 
 	/* New interrupts? */
-	pretend_interrupts ();
+	udc_irq();
 
-	/* Check for new data from host.. (do this after checking interrupts to get latest data) */
+	/* Check for new data from host..
+	 * (do this after checking interrupts to get latest data)
+	 */
 	if (usbtty_configured ()) {
 		fill_buffer (&usbtty_input);
 	}
 
 	/* New interrupts? */
-	pretend_interrupts ();
-}
+	udc_irq();
 
-static void pretend_interrupts (void)
-{
-	/* Loop while we have interrupts.
-	 * If we don't do this, the input chain
-	 * polling delay is likely to miss
-	 * host requests.
-	 */
-	while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) {
-		/* Handle any new IRQs */
-		omap1510_udc_irq ();
-		omap1510_udc_noniso_irq ();
-	}
 }
+
+
 #endif
diff --git a/drivers/usbtty.h b/drivers/usbtty.h
index 79c2fe57d7a..8154e3072ef 100644
--- a/drivers/usbtty.h
+++ b/drivers/usbtty.h
@@ -2,6 +2,9 @@
  * (C) Copyright 2003
  * Gerry Hamel, geh@ti.com, Texas Instruments
  *
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, bodonoghue@codehermit.ie, CodeHermit
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -21,44 +24,47 @@
 #ifndef __USB_TTY_H__
 #define __USB_TTY_H__
 
-
 #include "usbdcore.h"
+#if defined(CONFIG_PPC)
+#include "usbdcore_mpc8xx.h"
+#elif defined(CONFIG_ARM)
 #include "usbdcore_omap1510.h"
+#endif
 
+#include <version_autogenerated.h>
 
-#define NUM_CONFIGS    1
-#define NUM_INTERFACES 1
-#define NUM_ENDPOINTS  3
+/* If no VendorID/ProductID is defined in config.h, pretend to be Linux
+ * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */
 
-#define EP0_MAX_PACKET_SIZE 64
+#define CONFIG_USBD_VENDORID 0x0525 	/* Linux/NetChip */
+#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6	/* gserial */
+#define CONFIG_USBD_PRODUCTID_CDCACM  0xa4a7	/* CDC ACM */
+#define CONFIG_USBD_MANUFACTURER "Das U-Boot"
+#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION
 
-#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"
-#define CONFIG_USBD_INTERFACE_STR     "Simple Serial Data Interface - Bulk Mode"
 
+#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"
 
-#define CONFIG_USBD_SERIAL_OUT_ENDPOINT 2
-#define CONFIG_USBD_SERIAL_OUT_PKTSIZE	64
-#define CONFIG_USBD_SERIAL_IN_ENDPOINT	1
-#define CONFIG_USBD_SERIAL_IN_PKTSIZE	64
-#define CONFIG_USBD_SERIAL_INT_ENDPOINT 5
-#define CONFIG_USBD_SERIAL_INT_PKTSIZE	16
-
+#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT
+#define CONFIG_USBD_SERIAL_OUT_PKTSIZE	UDC_OUT_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_IN_ENDPOINT	UDC_IN_ENDPOINT
+#define CONFIG_USBD_SERIAL_IN_PKTSIZE	UDC_IN_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT
+#define CONFIG_USBD_SERIAL_INT_PKTSIZE	UDC_INT_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_BULK_PKTSIZE	UDC_BULK_PACKET_SIZE
 
 #define USBTTY_DEVICE_CLASS	COMMUNICATIONS_DEVICE_CLASS
-#define USBTTY_DEVICE_SUBCLASS	COMMUNICATIONS_NO_SUBCLASS
-#define USBTTY_DEVICE_PROTOCOL	COMMUNICATIONS_NO_PROTOCOL
-
-#define USBTTY_INTERFACE_CLASS	   0xFF /* Vendor Specific */
-#define USBTTY_INTERFACE_SUBCLASS  0x02
-#define USBTTY_INTERFACE_PROTOCOL  0x01
 
-#define USBTTY_BCD_DEVICE 0x0
-#define USBTTY_MAXPOWER	  0x0
+#define USBTTY_BCD_DEVICE 	0x00
+#define USBTTY_MAXPOWER	  	0x00
 
-#define STR_MANUFACTURER 1
-#define STR_PRODUCT	 2
-#define STR_SERIAL	 3
-#define STR_CONFIG	 4
-#define STR_INTERFACE	 5
+#define STR_LANG		0x00
+#define STR_MANUFACTURER	0x01
+#define STR_PRODUCT		0x02
+#define STR_SERIAL		0x03
+#define STR_CONFIG		0x04
+#define STR_DATA_INTERFACE	0x05
+#define STR_CTRL_INTERFACE	0x06
+#define STR_COUNT		0x07
 
 #endif
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index ebda7192ed0..e8cb29903be 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -592,9 +592,11 @@ typedef void		(*ExcpHndlr) (void) ;
 #define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
 #define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
 
+
 /*
  * USB Device Controller
  */
+#ifndef CONFIG_CPU_MONAHANS
 #define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
 #define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
 #define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
@@ -749,11 +751,28 @@ typedef void		(*ExcpHndlr) (void) ;
 #define USIR1_IR13	(1 << 5)	/* Interrup request ep 13 */
 #define USIR1_IR14	(1 << 6)	/* Interrup request ep 14 */
 #define USIR1_IR15	(1 << 7)	/* Interrup request ep 15 */
+#endif /* ! CONFIG_CPU_MONAHANS */
+
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+
+/*
+ * USB Client Controller (incomplete)
+ */
+#define UDCCR		__REG(0x40600000)
+#define UDCICR0		__REG(0x40600004)
+#define UDCCIR0		__REG(0x40600008)
+#define UDCISR0		__REG(0x4060000c)
+#define UDCSIR1		__REG(0x40600010)
+#define UDCFNR		__REG(0x40600014)
+#define UDCOTGICR	__REG(0x40600018)
+#define UDCOTGISR	__REG(0x4060001c)
+#define UP2OCR		__REG(0x40600020)
+#define UP3OCR		__REG(0x40600024)
 
-#if defined(CONFIG_PXA27X)
 /*
  * USB Host Controller
  */
+#define OHCI_REGS_BASE	0x4C000000	/* required for ohci driver */
 #define UHCREV		__REG(0x4C000000)
 #define UHCHCON		__REG(0x4C000004)
 #define UHCCOMS		__REG(0x4C000008)
diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h
new file mode 100644
index 00000000000..a4f7f9a28fb
--- /dev/null
+++ b/include/configs/AdderUSB.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2006 CodeHermit.
+ * Bryan O'Donoghue <bodonoghue@codehermit.ie>
+ *
+ * Provides support for USB console on the Analogue & Micro Adder87x
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ADDERUSB__
+#define __ADDERUSB__
+
+/* Include the board port */
+#include "Adder.h"
+
+#define CONFIG_USB_DEVICE		/* Include UDC driver */
+#define CONFIG_USB_TTY			/* Bind the TTY driver to UDC */
+#define CFG_USB_EXTC_CLK 0x02		/* Oscillator on EXTC_CLK 2 */
+#define CFG_USB_BRG_CLK	0x04		/* or use Baud rate generator 0x04 */
+#define CFG_CONSOLE_IS_IN_ENV		/* Console is in env */
+
+/* If you have a USB-IF assigned VendorID then you may wish to define
+ * your own vendor specific values either in BoardName.h or directly in
+ * usbd_vendor_info.h
+ */
+
+/*
+#define CONFIG_USBD_MANUFACTURER	"CodeHermit.ie"
+#define CONFIG_USBD_PRODUCT_NAME	"Das U-Boot"
+#define CONFIG_USBD_VENDORID		0xFFFF
+#define CONFIG_USBD_PRODUCTID_GSERIAL	0xFFFF
+#define CONFIG_USBD_PRODUCTID_CDCACM	0xFFFE
+*/
+
+#endif /* __ADDERUSB_H__ */
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 0d3825413ea..c380c545922 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -94,9 +94,16 @@
 
 /* USB */
 #if 1
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
 #define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT
+#define CFG_USB_OHCI_REGS_BASE	MPC5XXX_USB
+#define CFG_USB_OHCI_SLOT_NAME	"mpc5200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+
 #else
 #define ADD_USB_CMD             0
 #endif
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 7069b35ad60..5b011e82a36 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -146,9 +146,16 @@
 
 /* USB */
 #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
 #define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT
+#define CFG_USB_OHCI_REGS_BASE	MPC5XXX_USB
+#define CFG_USB_OHCI_SLOT_NAME	"mpc5200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+
 #else
 #define ADD_USB_CMD		0
 #endif
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 91284fdace8..4038f219602 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -94,12 +94,26 @@
 # define CONFIG_COMMANDS	((CONFIG_CMD_DFL \
 				  | CFG_CMD_ENV \
 				  | CFG_CMD_NAND \
-				  | CFG_CMD_I2C) \
+				  | CFG_CMD_I2C \
+				  | CFG_CMD_USB \
+				  | CFG_CMD_FAT) \
 				 & ~(CFG_CMD_NET \
 				     | CFG_CMD_FLASH \
 				     | CFG_CMD_IMLS))
 #endif
 
+/* USB */
+#define CONFIG_USB_OHCI_NEW	1
+#define CONFIG_USB_STORAGE      1
+#define CONFIG_DOS_PARTITION    1
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT	1
+#define CFG_USB_OHCI_REGS_BASE	OHCI_REGS_BASE
+#define CFG_USB_OHCI_SLOT_NAME	"delta"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	3
+
+#define LITTLEENDIAN            1       /* used by usb_ohci.c  */
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 04f1f240808..2cf78a3b150 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -101,12 +101,18 @@
 
 #undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
 
-#define CONFIG_USB_OHCI		1
+#define CONFIG_USB_OHCI_NEW	1
 #define CONFIG_USB_KEYBOARD	1
 #define CONFIG_USB_STORAGE	1
 #define CONFIG_DOS_PARTITION	1
 #define CONFIG_AT91C_PQFP_UHPBUG 1
 
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT		1
+#define CFG_USB_OHCI_REGS_BASE		AT91_USB_HOST_BASE
+#define CFG_USB_OHCI_SLOT_NAME		"at91rm9200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+
 #undef CONFIG_HARD_I2C
 
 #ifdef CONFIG_HARD_I2C
@@ -127,7 +133,7 @@
 #define CONFIG_COMMANDS		\
 		       ((CONFIG_CMD_DFL	| \
 			CFG_CMD_DATE	| \
-			CFG_CMD_DHCP 	| \
+			CFG_CMD_DHCP	| \
 			CFG_CMD_EEPROM	| \
 			CFG_CMD_I2C	| \
 			CFG_CMD_NFS	| \
@@ -136,7 +142,7 @@
 #else
 #define CONFIG_COMMANDS		\
 		       ((CONFIG_CMD_DFL	| \
-			CFG_CMD_DHCP 	| \
+			CFG_CMD_DHCP	| \
 			CFG_CMD_NFS	| \
 			CFG_CMD_SNTP	| \
 			CFG_CMD_USB      | \
@@ -156,7 +162,7 @@
 
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM		0x20000000
-#define PHYS_SDRAM_SIZE		0x08000000 	/* 128 megs */
+#define PHYS_SDRAM_SIZE		0x08000000	/* 128 megs */
 
 #define CFG_MEMTEST_START	PHYS_SDRAM
 #define CFG_MEMTEST_END		CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
diff --git a/include/configs/trab.h b/include/configs/trab.h
index a2dc8e7bff8..acf86d08ad2 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -80,10 +80,16 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /* USB stuff */
-#define CONFIG_USB_OHCI		1
+#define CONFIG_USB_OHCI_NEW	1
 #define CONFIG_USB_STORAGE	1
 #define CONFIG_DOS_PARTITION	1
 
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT	1
+#define CFG_USB_OHCI_REGS_BASE	S3C24X0_USB_HOST_BASE
+#define CFG_USB_OHCI_SLOT_NAME	"s3c2400"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+
 /*
  * Size of malloc() pool
  */
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 818462eedee..b59f75b9d0f 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -233,9 +233,15 @@
 
 #ifdef CONFIG_440EP
 /* USB */
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
 
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT	1
+#define CFG_USB_OHCI_REGS_BASE	(CFG_PERIPHERAL_BASE | 0x1000)
+#define CFG_USB_OHCI_SLOT_NAME	"ppc440"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
 
diff --git a/include/da9030.h b/include/da9030.h
index 41108b9b36f..3e3b2024156 100644
--- a/include/da9030.h
+++ b/include/da9030.h
@@ -104,3 +104,15 @@
 #define SYS_CONTROL_A_HWRES_ENABLE		(1<<2)
 #define SYS_CONTROL_A_WDOG_ACTION		(1<<3)
 #define SYS_CONTROL_A_WATCHDOG			(1<<7)
+
+#define MISC_CONTROLB_USB_INT_RISING		(1<<2)
+#define MISC_CONTROLB_SESSION_VALID_EN		(1<<3)
+
+#define USB_PUMP_USBVE				(1<<0)
+#define USB_PUMP_USBVEP				(1<<1)
+#define USB_PUMP_SRP_DETECT			(1<<2)
+#define USB_PUMP_SESSION_VALID			(1<<3)
+#define USB_PUMP_VBUS_VALID_4_0			(1<<4)
+#define USB_PUMP_VBUS_VALID_4_4			(1<<5)
+#define USB_PUMP_EN_USBVE			(1<<6)
+#define USB_PUMP_EN_USBVEP			(1<<7)
diff --git a/include/usb.h b/include/usb.h
index bf715540417..419a7e364a5 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -169,7 +169,7 @@ struct usb_device {
  * this is how the lowlevel part communicate with the outer world
  */
 
-#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined (CONFIG_USB_SL811HS)
+#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined (CONFIG_USB_SL811HS) || defined(CONFIG_USB_OHCI_NEW)
 int usb_lowlevel_init(void);
 int usb_lowlevel_stop(void);
 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len);
@@ -230,16 +230,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 
 /* big endian -> little endian conversion */
 /* some CPUs are already little endian e.g. the ARM920T */
-#ifdef LITTLEENDIAN
-#define swap_16(x) ((unsigned short)(x))
-#define swap_32(x) ((unsigned long)(x))
-#else
-#define swap_16(x) \
+#define __swap_16(x) \
 	({ unsigned short x_ = (unsigned short)x; \
 	 (unsigned short)( \
 		((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8) ); \
 	})
-#define swap_32(x) \
+#define __swap_32(x) \
 	({ unsigned long x_ = (unsigned long)x; \
 	 (unsigned long)( \
 		((x_ & 0x000000FFUL) << 24) | \
@@ -247,6 +243,13 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 		((x_ & 0x00FF0000UL) >>	 8) | \
 		((x_ & 0xFF000000UL) >> 24) ); \
 	})
+
+#ifdef LITTLEENDIAN
+# define swap_16(x) (x)
+# define swap_32(x) (x)
+#else
+# define swap_16(x) __swap_16(x)
+# define swap_32(x) __swap_32(x)
 #endif /* LITTLEENDIAN */
 
 /*
diff --git a/include/usb_cdc_acm.h b/include/usb_cdc_acm.h
new file mode 100644
index 00000000000..87bf50c52ba
--- /dev/null
+++ b/include/usb_cdc_acm.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, deckard@codehermit.ie, CodeHermit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/* ACM Control Requests */
+#define ACM_SEND_ENCAPSULATED_COMMAND	0x00
+#define ACM_GET_ENCAPSULATED_RESPONSE	0x01
+#define ACM_SET_COMM_FEATURE		0x02
+#define ACM_GET_COMM_FEATRUE		0x03
+#define ACM_CLEAR_COMM_FEATURE		0x04
+#define ACM_SET_LINE_ENCODING		0x20
+#define ACM_GET_LINE_ENCODING		0x21
+#define ACM_SET_CONTROL_LINE_STATE	0x22
+#define ACM_SEND_BREAK			0x23
+
+/* ACM Notification Codes */
+#define ACM_NETWORK_CONNECTION		0x00
+#define ACM_RESPONSE_AVAILABLE		0x01
+#define ACM_SERIAL_STATE		0x20
+
+/* Format of response expected by a ACM_GET_LINE_ENCODING request */
+struct rs232_emu{
+		unsigned long dter;
+		unsigned char stop_bits;
+		unsigned char parity;
+		unsigned char data_bits;
+}__attribute__((packed));
diff --git a/include/usbdcore.h b/include/usbdcore.h
index 6e92df13bd0..cb2be72804a 100644
--- a/include/usbdcore.h
+++ b/include/usbdcore.h
@@ -576,6 +576,9 @@ struct usb_device_instance {
 
 	void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data);
 
+	/* Do cdc device specific control requests */
+	int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb);
+
 	/* bus interface */
 	struct usb_bus_instance *bus;	/* which bus interface driver */
 
diff --git a/include/usbdcore_mpc8xx.h b/include/usbdcore_mpc8xx.h
new file mode 100644
index 00000000000..9df62f4ca51
--- /dev/null
+++ b/include/usbdcore_mpc8xx.h
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2006 Bryan O'Donoghue, CodeHermit
+ * bodonoghue@codehermit.ie
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#include <commproc.h>
+
+/* Mode Register */
+#define USMOD_EN	0x01
+#define USMOD_HOST	0x02
+#define USMOD_TEST	0x04
+#define USMOD_SFTE	0x08
+#define USMOD_RESUME	0x40
+#define USMOD_LSS	0x80
+
+/* Endpoint Registers */
+#define USEP_RHS_NORM	0x00
+#define USEP_RHS_IGNORE	0x01
+#define USEP_RHS_NAK	0x02
+#define USEP_RHS_STALL	0x03
+
+#define USEP_THS_NORM	0x00
+#define USEP_THS_IGNORE	0x04
+#define USEP_THS_NAK	0x08
+#define USEP_THS_STALL	0x0C
+
+#define USEP_RTE	0x10
+#define USEP_MF		0x20
+
+#define USEP_TM_CONTROL	0x00
+#define USEP_TM_INT	0x100
+#define USEP_TM_BULK	0x200
+#define USEP_TM_ISO	0x300
+
+/* Command Register */
+#define USCOM_EP0	0x00
+#define USCOM_EP1	0x01
+#define USCOM_EP2	0x02
+#define USCOM_EP3	0x03
+
+#define USCOM_FLUSH	0x40
+#define USCOM_STR	0x80
+
+/* Event Register */
+#define USB_E_RXB	0x0001
+#define USB_E_TXB	0x0002
+#define USB_E_BSY	0x0004
+#define USB_E_SOF	0x0008
+#define USB_E_TXE1	0x0010
+#define USB_E_TXE2	0x0020
+#define USB_E_TXE3	0x0040
+#define USB_E_TXE4	0x0080
+#define USB_TX_ERRMASK (USB_E_TXE1|USB_E_TXE2|USB_E_TXE3|USB_E_TXE4)
+#define USB_E_IDLE	0x0100
+#define USB_E_RESET	0x0200
+
+/* Mask Register */
+#define USBS_IDLE	0x01
+
+/* RX Buffer Descriptor */
+#define RX_BD_OV	0x02
+#define RX_BD_CR	0x04
+#define RX_BD_AB	0x08
+#define RX_BD_NO	0x10
+#define RX_BD_PID_DATA0	0x00
+#define RX_BD_PID_DATA1	0x40
+#define RX_BD_PID_SETUP	0x80
+#define RX_BD_F		0x400
+#define RX_BD_L		0x800
+#define RX_BD_I		0x1000
+#define RX_BD_W		0x2000
+#define RX_BD_E		0x8000
+
+/* Useful masks */
+#define RX_BD_PID_BITMASK (RX_BD_PID_DATA1 | RX_BD_PID_SETUP)
+#define STALL_BITMASK (USEP_THS_STALL | USEP_RHS_STALL)
+#define NAK_BITMASK (USEP_THS_NAK | USEP_RHS_NAK)
+#define CBD_TX_BITMASK (TX_BD_R | TX_BD_L | TX_BD_TC | TX_BD_I | TX_BD_CNF)
+
+/* TX Buffer Descriptor */
+#define TX_BD_UN	0x02
+#define TX_BD_TO	0x04
+#define TX_BD_NO_PID	0x00
+#define TX_BD_PID_DATA0	0x80
+#define TX_BD_PID_DATA1	0xC0
+#define TX_BD_CNF	0x200
+#define TX_BD_TC	0x400
+#define TX_BD_L		0x800
+#define TX_BD_I		0x1000
+#define TX_BD_W		0x2000
+#define TX_BD_R		0x8000
+
+/* Implementation specific defines */
+
+#define EP_MIN_PACKET_SIZE 0x08
+#define MAX_ENDPOINTS	0x04
+#define FIFO_SIZE	0x10
+#define EP_MAX_PKT	FIFO_SIZE
+#define TX_RING_SIZE	0x04
+#define RX_RING_SIZE	0x06
+#define USB_MAX_PKT	0x40
+#define TOGGLE_TX_PID(x) x= ((~x)&0x40)|0x80
+#define TOGGLE_RX_PID(x) x^= 0x40
+#define EP_ATTACHED	0x01	/* Endpoint has a urb attached or not */
+#define EP_SEND_ZLP	0x02	/* Send ZLP y/n ? */
+
+#define PROFF_USB	0x00000000
+#define CPM_USB_BASE	0x00000A00
+
+/* UDC device defines */
+#define EP0_MAX_PACKET_SIZE	EP_MAX_PKT
+#define UDC_OUT_ENDPOINT	0x02
+#define UDC_OUT_PACKET_SIZE	EP_MIN_PACKET_SIZE
+#define UDC_IN_ENDPOINT		0x03
+#define UDC_IN_PACKET_SIZE	EP_MIN_PACKET_SIZE
+#define UDC_INT_ENDPOINT	0x01
+#define UDC_INT_PACKET_SIZE	UDC_IN_PACKET_SIZE
+#define UDC_BULK_PACKET_SIZE	EP_MIN_PACKET_SIZE
+
+struct mpc8xx_ep {
+	struct urb * urb;
+	unsigned char pid;
+	unsigned char sc;
+	volatile cbd_t * prx;
+};
+
+typedef struct mpc8xx_usb{
+	char usmod;	/* Mode Register */
+	char usaddr;	/* Slave Address Register */
+	char uscom;	/* Command Register */
+	char res1;	/* Reserved */
+	ushort usep[4];
+	ulong res2;	/* Reserved */
+	ushort usber;	/* Event Register */
+	ushort res3;	/* Reserved */
+	ushort usbmr;	/* Mask Register */
+	char res4;	/* Reserved */
+	char usbs;	/* Status Register */
+	char res5[8];	/* Reserved */
+}usb_t;
+
+typedef struct mpc8xx_parameter_ram{
+	ushort ep0ptr;	/* Endpoint Pointer Register 0 */
+	ushort ep1ptr;	/* Endpoint Pointer Register 1 */
+	ushort ep2ptr;	/* Endpoint Pointer Register 2 */
+	ushort ep3ptr;	/* Endpoint Pointer Register 3 */
+	uint rstate;	/* Receive state */
+	uint rptr;	/* Receive internal data pointer */
+	ushort frame_n;	/* Frame number */
+	ushort rbcnt;	/* Receive byte count */
+	uint rtemp;	/* Receive temp cp use only */
+	uint rxusb;	/* Rx Data Temp */
+	ushort rxuptr;	/* Rx microcode return address temp */
+}usb_pram_t;
+
+typedef struct endpoint_parameter_block_pointer{
+	ushort rbase;	/* RxBD base address */
+	ushort tbase;	/* TxBD base address */
+	char rfcr;	/* Rx Function code */
+	char tfcr;	/* Tx Function code */
+	ushort mrblr;	/* Maximum Receive Buffer Length */
+	ushort rbptr; 	/* RxBD pointer Next Buffer Descriptor */
+	ushort tbptr;	/* TxBD pointer Next Buffer Descriptor  */
+	ulong tstate;	/* Transmit internal state */
+	ulong tptr;	/* Transmit internal data pointer */
+	ushort tcrc;	/* Transmit temp CRC */
+	ushort tbcnt;	/* Transmit internal bye count */
+	ulong ttemp;	/* Tx temp */
+	ushort txuptr;	/* Tx microcode return address */
+	ushort res1;	/* Reserved */
+}usb_epb_t;
+
+typedef enum mpc8xx_udc_state{
+	STATE_NOT_READY,
+	STATE_ERROR,
+	STATE_READY,
+}mpc8xx_udc_state_t;
+
+/* Declarations */
+int udc_init(void);
+void udc_irq(void);
+int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
+void udc_setup_ep(struct usb_device_instance *device, unsigned int ep,
+		  struct usb_endpoint_instance *endpoint);
+void udc_connect(void);
+void udc_disconnect(void);
+void udc_enable(struct usb_device_instance *device);
+void udc_disable(void);
+void udc_startup_events(struct usb_device_instance *device);
+
+/* Flow control */
+void udc_set_nak(int epid);
+void udc_unset_nak (int epid);
diff --git a/include/usbdcore_omap1510.h b/include/usbdcore_omap1510.h
index 6ea333122fd..526fcd920db 100644
--- a/include/usbdcore_omap1510.h
+++ b/include/usbdcore_omap1510.h
@@ -161,10 +161,20 @@
 #define UDC_VBUS_CTRL	    (1 << 19)
 #define UDC_VBUS_MODE	    (1 << 18)
 
-
-void omap1510_udc_irq(void);
-void omap1510_udc_noniso_irq(void);
-
+/* OMAP Endpoint parameters */
+#define EP0_MAX_PACKET_SIZE 64
+#define UDC_OUT_ENDPOINT 2
+#define UDC_OUT_PACKET_SIZE 64
+#define UDC_IN_ENDPOINT	1
+#define UDC_IN_PACKET_SIZE 64
+#define UDC_INT_ENDPOINT 5
+#define UDC_INT_PKTSIZE	16
+#define UDC_BULK_PKTSIZE 16
+
+void udc_irq (void);
+/* Flow control */
+void udc_set_nak(int epid);
+void udc_unset_nak (int epid);
 
 /* Higher level functions for abstracting away from specific device */
 void udc_endpoint_write(struct usb_endpoint_instance *endpoint);
diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h
index 2d9f739343e..a752097e5bc 100644
--- a/include/usbdescriptors.h
+++ b/include/usbdescriptors.h
@@ -92,33 +92,42 @@
 #define COMMUNICATIONS_DEVICE_CLASS	0x02
 
 /* c.f. CDC 4.2 Table 15 */
-#define COMMUNICATIONS_INTERFACE_CLASS	0x02
+#define COMMUNICATIONS_INTERFACE_CLASS_CONTROL	0x02
+#define COMMUNICATIONS_INTERFACE_CLASS_DATA		0x0A
+#define COMMUNICATIONS_INTERFACE_CLASS_VENDOR	0x0FF
 
 /* c.f. CDC 4.3 Table 16 */
-#define COMMUNICATIONS_NO_SUBCLASS	0x00
+#define COMMUNICATIONS_NO_SUBCLASS		0x00
 #define COMMUNICATIONS_DLCM_SUBCLASS	0x01
-#define COMMUNICATIONS_ACM_SUBCLASS	0x02
-#define COMMUNICATIONS_TCM_SUBCLASS	0x03
+#define COMMUNICATIONS_ACM_SUBCLASS		0x02
+#define COMMUNICATIONS_TCM_SUBCLASS		0x03
 #define COMMUNICATIONS_MCCM_SUBCLASS	0x04
-#define COMMUNICATIONS_CCM_SUBCLASS	0x05
+#define COMMUNICATIONS_CCM_SUBCLASS		0x05
 #define COMMUNICATIONS_ENCM_SUBCLASS	0x06
 #define COMMUNICATIONS_ANCM_SUBCLASS	0x07
 
 /* c.f. WMCD 5.1 */
 #define COMMUNICATIONS_WHCM_SUBCLASS	0x08
-#define COMMUNICATIONS_DMM_SUBCLASS	0x09
+#define COMMUNICATIONS_DMM_SUBCLASS		0x09
 #define COMMUNICATIONS_MDLM_SUBCLASS	0x0a
 #define COMMUNICATIONS_OBEX_SUBCLASS	0x0b
 
-/* c.f. CDC 4.6 Table 18 */
+/* c.f. CDC 4.4 Table 17 */
+#define COMMUNICATIONS_NO_PROTOCOL		0x00
+#define COMMUNICATIONS_V25TER_PROTOCOL	0x01	/*Common AT Hayes compatible*/
+
+/* c.f. CDC 4.5 Table 18 */
 #define DATA_INTERFACE_CLASS		0x0a
 
+/* c.f. CDC 4.6 No Table */
+#define DATA_INTERFACE_SUBCLASS_NONE	0x00	/* No subclass pertinent */
+
 /* c.f. CDC 4.7 Table 19 */
-#define COMMUNICATIONS_NO_PROTOCOL	0x00
+#define DATA_INTERFACE_PROTOCOL_NONE	0x00	/* No class protcol required */
 
 
 /* c.f. CDC 5.2.3 Table 24 */
-#define CS_INTERFACE			0x24
+#define CS_INTERFACE		0x24
 #define CS_ENDPOINT			0x25
 
 /*
@@ -128,7 +137,7 @@
  * c.f. WMCD 5.3 Table 5.3
  */
 
-#define USB_ST_HEADER			0x00
+#define USB_ST_HEADER		0x00
 #define USB_ST_CMF			0x01
 #define USB_ST_ACMF			0x02
 #define USB_ST_DLMF			0x03
@@ -137,18 +146,18 @@
 #define USB_ST_UF			0x06
 #define USB_ST_CSF			0x07
 #define USB_ST_TOMF			0x08
-#define USB_ST_USBTF			0x09
+#define USB_ST_USBTF		0x09
 #define USB_ST_NCT			0x0a
 #define USB_ST_PUF			0x0b
 #define USB_ST_EUF			0x0c
 #define USB_ST_MCMF			0x0d
 #define USB_ST_CCMF			0x0e
 #define USB_ST_ENF			0x0f
-#define USB_ST_ATMNF			0x10
+#define USB_ST_ATMNF		0x10
 
 #define USB_ST_WHCM			0x11
 #define USB_ST_MDLM			0x12
-#define USB_ST_MDLMD			0x13
+#define USB_ST_MDLMD		0x13
 #define USB_ST_DMM			0x14
 #define USB_ST_OBEX			0x15
 #define USB_ST_CS			0x16
@@ -312,7 +321,8 @@ struct usb_class_union_function_descriptor {
 	u8 bDescriptorType;
 	u8 bDescriptorSubtype;	/* 0x06 */
 	u8 bMasterInterface;
-	u8 bSlaveInterface0[0];
+	/* u8 bSlaveInterface0[0]; */
+	u8 bSlaveInterface0;
 } __attribute__ ((packed));
 
 struct usb_class_country_selection_descriptor {
author	Markus Klotzbuecher <mk@denx.de>	2007-03-23 09:52:17 +0100
committer	Markus Klotzbuecher <mk@pollux.denx.de>	2007-03-23 09:52:17 +0100
commit	f2b07ebd32e42a5b1126c98efc768ddb8908de62 (patch)
tree	e2a374a15d0abf6872fbbdeecf8e34855e56d3c9
parent	44ba464b99001f8bd1c456a1e9d59726252f707a (diff)
parent	83dc830b1693252d996bda920cd5f3161d7c64a9 (diff)