summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-08-01 22:48:16 +0000
committerwdenk <wdenk>2004-08-01 22:48:16 +0000
commit281e00a3be453a169d854f824a460359d10f92bb (patch)
tree43dab398f1d6f601bb44df108427f7e0c611d68d
parentcfca5e604d5692f081cc1a9185ca5dc6dc77599d (diff)
* Code cleanup
* Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
-rw-r--r--CHANGELOG13
-rw-r--r--MAKEALL9
-rw-r--r--Makefile17
-rw-r--r--board/lwmon/lwmon.c8
-rw-r--r--board/mx1ads/mx1ads.c44
-rw-r--r--board/mx1ads/syncflash.c42
-rw-r--r--board/mx1ads/u-boot.lds3
-rw-r--r--board/mx1fs2/Makefile (renamed from cpu/mc9328/Makefile)24
-rw-r--r--board/mx1fs2/config.mk10
-rw-r--r--board/mx1fs2/flash.c914
-rw-r--r--board/mx1fs2/intel.h99
-rw-r--r--board/mx1fs2/memsetup.S188
-rw-r--r--board/mx1fs2/mx1fs2.c125
-rw-r--r--board/mx1fs2/u-boot.lds56
-rw-r--r--board/netphone/phone_console.c1
-rw-r--r--board/sbc8560/sbc8560.c4
-rw-r--r--board/scb9328/Makefile (renamed from cpu/mc9328/config.mk)30
-rw-r--r--board/scb9328/config.mk10
-rw-r--r--board/scb9328/flash.c321
-rw-r--r--board/scb9328/intel.h99
-rw-r--r--board/scb9328/memsetup.S203
-rw-r--r--board/scb9328/scb9328.c73
-rw-r--r--board/scb9328/u-boot.lds56
-rw-r--r--board/total5200/total5200.c2
-rw-r--r--common/Makefile2
-rw-r--r--common/cmd_bmp.c9
-rw-r--r--common/cmd_nvedit.c6
-rw-r--r--common/devices.c4
-rw-r--r--common/serial.c196
-rw-r--r--cpu/arm720t/cpu.c2
-rw-r--r--cpu/arm920t/Makefile6
-rw-r--r--cpu/arm920t/imx_generic.c90
-rw-r--r--cpu/arm920t/imx_interrupts.c117
-rw-r--r--cpu/arm920t/imx_speed.c102
-rw-r--r--cpu/arm920t/interrupts.c143
-rw-r--r--cpu/arm920t/s3c24x0_interrupts.c180
-rw-r--r--cpu/arm920t/s3c24x0_serial.c (renamed from cpu/arm920t/serial.c)34
-rw-r--r--cpu/arm920t/s3c24x0_speed.c (renamed from cpu/arm920t/speed.c)6
-rw-r--r--cpu/arm920t/start.S24
-rw-r--r--cpu/mc9328/cpu.c183
-rw-r--r--cpu/mc9328/interrupts.c249
-rw-r--r--cpu/mc9328/serial.c133
-rw-r--r--cpu/mc9328/start.S388
-rw-r--r--cpu/mpc824x/cpu_init.c6
-rw-r--r--cpu/mpc85xx/speed.c1
-rw-r--r--cpu/mpc8xx/scc.c6
-rw-r--r--cpu/mpc8xx/serial.c234
-rw-r--r--cpu/mpc8xx/spi.c10
-rw-r--r--doc/README.serial_multi37
-rw-r--r--drivers/Makefile14
-rw-r--r--drivers/cfb_console.c1
-rw-r--r--drivers/dm9000x.c590
-rw-r--r--drivers/dm9000x.h119
-rw-r--r--drivers/serial_imx.c201
-rw-r--r--include/asm-arm/arch-arm920t/imx-regs.h571
-rw-r--r--include/common.h20
-rw-r--r--include/commproc.h5
-rw-r--r--include/configs/PPChameleonEVB.h9
-rw-r--r--include/configs/Total5200.h1
-rw-r--r--include/configs/lwmon.h18
-rw-r--r--include/configs/mx1ads.h89
-rw-r--r--include/configs/mx1fs2.h291
-rw-r--r--include/configs/scb9328.h357
-rw-r--r--include/devices.h2
-rw-r--r--include/mc9328.h1051
-rw-r--r--include/mpc824x.h1
-rw-r--r--include/serial.h30
-rw-r--r--lib_arm/board.c3
-rw-r--r--lib_ppc/board.c6
-rw-r--r--post/ether.c27
-rw-r--r--post/uart.c53
71 files changed, 5489 insertions, 2489 deletions
diff --git a/CHANGELOG b/CHANGELOG
index eb19c0e83ce..e9a7998dc1f 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,12 +2,23 @@
Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Sascha Hauer, 28 Jun:
+ - add generic support for Motorola i.MX architecture
+ - add support for mx1ads, mx1fs2 and scb9328 boards
+
+* Patches by Marc Leeman, 23 Jul 2004:
+ - Add define for the PCI/Memory Buffer Configuration Register
+ - corrected comments in cpu/mpc824x/cpu_init.c
+
+* Add support for multiple serial interfaces
+ (for example to allow modem dial-in / dial-out)
+
* Patch by Stefan Roese, 15 Jul 2004:
cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
* Fix NSCU config; add ethernet wakeup code.
-* Add link for preloader for Motorola Coldfire to RAEDME.m68k
+* Add link for preloader for Motorola Coldfire to README.m68k
* Patch by Michael Bendzick, 12 Jul 2004:
fix output formatting in drivers/cfi_flash.c
diff --git a/MAKEALL b/MAKEALL
index a4f29440213..131dc37ed0c 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -139,11 +139,10 @@ LIST_ARM7="B2 ep7312 evb4510 impa7 modnet50"
#########################################################################
LIST_ARM9=" \
- at91rm9200dk integratorcp integratorap \
- lpd7a400 mx1ads omap1510inn \
- omap1610h2 omap1610inn omap730p2 \
- smdk2400 smdk2410 trab \
- VCMA9 versatile \
+ at91rm9200dk integratorcp integratorap lpd7a400 \
+ mx1ads mx1fs2 omap1510inn omap1610h2 \
+ omap1610inn omap730p2 scb9328 smdk2400 \
+ smdk2410 trab VCMA9 versatile \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 1601d7de80b..5da162838da 100644
--- a/Makefile
+++ b/Makefile
@@ -757,6 +757,7 @@ PLU405_config: unconfig
PMC405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd
+PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
PPChameleonEVB_ME_25_config \
PPChameleonEVB_HI_25_config \
@@ -1154,6 +1155,12 @@ lpd7a400_config \
lpd7a404_config: unconfig
@./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
+mx1ads_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t mx1ads
+
+mx1fs2_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t mx1fs2
+
omap1510inn_config : unconfig
@./mkconfig $(@:_config=) arm arm925t omap1510inn
@@ -1192,6 +1199,9 @@ omap730p2_cs3boot_config : unconfig
fi;
@./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2
+scb9328_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t scb9328
+
smdk2400_config : unconfig
@./mkconfig $(@:_config=) arm arm920t smdk2400
@@ -1240,13 +1250,6 @@ B2_config : unconfig
@./mkconfig $(@:_config=) arm s3c44b0 B2 dave
#########################################################################
-## MC9328 (Dragonball) Systems
-#########################################################################
-
-mx1ads_config : unconfig
- @./mkconfig $(@:_config=) arm mc9328 mx1ads
-
-#########################################################################
## ARM720T Systems
#########################################################################
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index 6776dbf4740..904e7ea98c5 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -40,6 +40,7 @@ V* Verification: dzu@denx.de
#include <command.h>
#include <malloc.h>
#include <post.h>
+#include <serial.h>
#include <linux/types.h>
#include <linux/string.h> /* for strdup */
@@ -468,6 +469,13 @@ int board_postclk_init (void)
return (0);
}
+struct serial_device * default_serial_console (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ return gd->do_mdm_init ? &serial_scc_device : &serial_smc_device;
+}
+
static void kbd_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
index 453e4bb0a0c..661fbab0ab4 100644
--- a/board/mx1ads/mx1ads.c
+++ b/board/mx1ads/mx1ads.c
@@ -23,9 +23,9 @@
* MA 02111-1307 USA
*/
-
#include <common.h>
-#include <mc9328.h>
+/*#include <mc9328.h>*/
+#include <asm/arch-arm920t/imx-regs.h>
/* ------------------------------------------------------------------------- */
@@ -67,7 +67,6 @@ static inline void delay (unsigned long loops) {
* Miscellaneous platform dependent initialisations
*/
-
void SetAsynchMode(void) {
__asm__ (
"mrc p15,0,r0,c1,c0,0 \n"
@@ -85,42 +84,34 @@ int board_init (void) {
volatile unsigned int tmp;
- mc9328sid = MX1_SIDR;
+ mc9328sid = SIDR;
- MX1_GPCR = 0x000003AB; /* I/O pad driving strength */
+ GPCR = 0x000003AB; /* I/O pad driving strength */
/* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */
/* MX1_CS1L = 0x11110601; */
- MX1_MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */
-
-/* MX1_MPCTL0 = 0x003f1437; */ /* setting for 192 MHz MCU PLL CLK */
+ MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */
/* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and
* BCLK divider to 2 (i.e. BCLK to 48 MHz)
*/
- MX1_CSCR = 0xAF000403;
+ CSCR = 0xAF000403;
- MX1_CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */
- MX1_CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */
+ CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */
+ CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */
/* setup cs4 for cs8900 ethernet */
- MX1_CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */
- MX1_CS4L = 0x00001501;
+ CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */
+ CS4L = 0x00001501;
- MX1_GIUS_A &= 0xFF3FFFFF;
- MX1_GPR_A &= 0xFF3FFFFF;
+ GIUS(0) &= 0xFF3FFFFF;
+ GPR(0) &= 0xFF3FFFFF;
tmp = *(unsigned int *)(0x1500000C);
tmp = *(unsigned int *)(0x1500000C);
-/* setup timer 1 as system timer */
-
- MX1_TPRER1 = 0x1f; /* divide by 32 */
- MX1_TCTL1 = 0x19; /* clock in from 32k Osc. */
-
-
SetAsynchMode();
gd->bd->bi_arch_number = 160; /* Arch number of MX1ADS Board */
@@ -131,19 +122,19 @@ int board_init (void) {
dcache_enable();
/* set PERCLKs */
- MX1_PCDR = 0x00000055; /* set PERCLKS */
+ PCDR = 0x00000055; /* set PERCLKS */
/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes
* PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place
* all sources selected as normal interrupt
*/
- MX1_INTTYPEH = 0;
- MX1_INTTYPEL = 0;
+/* MX1_INTTYPEH = 0;
+ MX1_INTTYPEL = 0;
+*/
return 0;
}
-
int board_late_init(void) {
setenv("stdout", "serial");
@@ -163,13 +154,10 @@ int board_late_init(void) {
default :
printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid);
break;
-
}
-
return 0;
}
-
int dram_init (void) {
DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c
index 09fc0f86e45..eb7fde5071a 100644
--- a/board/mx1ads/syncflash.c
+++ b/board/mx1ads/syncflash.c
@@ -24,7 +24,8 @@
*/
#include <common.h>
-#include <mc9328.h>
+/*#include <mc9328.h>*/
+#include <asm/arch/imx-regs.h>
typedef unsigned long * p_u32;
@@ -33,27 +34,26 @@ typedef unsigned long * p_u32;
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* Following Setting is for CSD1 */
-#define SFCTL 0x00221004
-#define reg_SFCTL __REG(SFCTL)
+#define SFCTL 0x00221004
+#define reg_SFCTL __REG(SFCTL)
-#define SYNCFLASH_A10 (0x00100000)
+#define SYNCFLASH_A10 (0x00100000)
-#define CMD_NORMAL (0x81020300) /* Normal Mode */
-#define CMD_PREC (CMD_NORMAL + 0x10000000) /* Precharge Command */
-#define CMD_AUTO (CMD_NORMAL + 0x20000000) /* Auto Refresh Command */
-#define CMD_LMR (CMD_NORMAL + 0x30000000) /* Load Mode Register Command */
-#define CMD_LCR (CMD_NORMAL + 0x60000000) /* LCR Command */
-#define CMD_PROGRAM (CMD_NORMAL + 0x70000000)
+#define CMD_NORMAL (0x81020300) /* Normal Mode */
+#define CMD_PREC (CMD_NORMAL + 0x10000000) /* Precharge Command */
+#define CMD_AUTO (CMD_NORMAL + 0x20000000) /* Auto Refresh Command */
+#define CMD_LMR (CMD_NORMAL + 0x30000000) /* Load Mode Register Command */
+#define CMD_LCR (CMD_NORMAL + 0x60000000) /* LCR Command */
+#define CMD_PROGRAM (CMD_NORMAL + 0x70000000)
-#define MODE_REG_VAL (CFG_FLASH_BASE+0x0008CC00) /* Cas Latency 3 */
+#define MODE_REG_VAL (CFG_FLASH_BASE+0x0008CC00) /* Cas Latency 3 */
/* LCR Command */
-#define LCR_READSTATUS (0x0001C000) /* 0x70 */
-#define LCR_ERASE_CONFIRM (0x00008000) /* 0x20 */
-#define LCR_ERASE_NVMODE (0x0000C000) /* 0x30 */
-#define LCR_PROG_NVMODE (0x00028000) /* 0xA0 */
-#define LCR_SR_CLEAR (0x00014000) /* 0x50 */
-
+#define LCR_READSTATUS (0x0001C000) /* 0x70 */
+#define LCR_ERASE_CONFIRM (0x00008000) /* 0x20 */
+#define LCR_ERASE_NVMODE (0x0000C000) /* 0x30 */
+#define LCR_PROG_NVMODE (0x00028000) /* 0xA0 */
+#define LCR_SR_CLEAR (0x00014000) /* 0x50 */
/* Get Status register */
u32 SF_SR(void) {
@@ -82,7 +82,6 @@ u8 SF_Ready(void) {
if ((tmp & 0x00000080) && (tmp & 0x0000001C)) {
printf ("SyncFlash Error code %08x\n",tmp);
-
};
if (tmp == 0x00800080) /* Test Bit 7 of SR */
@@ -98,7 +97,6 @@ void SF_PrechargeAll(void) {
reg_SFCTL = CMD_PREC; /* Set Precharge Command */
tmp = __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */
-
}
/* set SyncFlash to normal mode */
@@ -128,7 +126,6 @@ void SF_Erase(u32 RowAddress) {
while(!SF_Ready());
}
-
void SF_NvmodeErase(void) {
SF_PrechargeAll();
@@ -149,10 +146,8 @@ void SF_NvmodeWrite(void) {
reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
__REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; /* Confirm not needed */
-
}
-
/****************************************************************************************/
ulong flash_init(void) {
@@ -195,7 +190,6 @@ ulong flash_init(void) {
return FLASH_BANK_SIZE;
}
-
void flash_print_info (flash_info_t *info) {
int i;
@@ -209,7 +203,6 @@ void flash_print_info (flash_info_t *info) {
break;
}
-
switch (info->flash_id & FLASH_TYPEMASK) {
case (FLASH_MT28S4M16LC & FLASH_TYPEMASK):
printf("2x FLASH_MT28S4M16LC (16MB Total)\n");
@@ -236,7 +229,6 @@ void flash_print_info (flash_info_t *info) {
printf ("\n");
}
-
/*-----------------------------------------------------------------------*/
int flash_erase (flash_info_t *info, int s_first, int s_last) {
diff --git a/board/mx1ads/u-boot.lds b/board/mx1ads/u-boot.lds
index 53743cdb80e..649216abda0 100644
--- a/board/mx1ads/u-boot.lds
+++ b/board/mx1ads/u-boot.lds
@@ -23,7 +23,6 @@
* MA 02111-1307 USA
*/
-
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
@@ -34,7 +33,7 @@ SECTIONS
. = ALIGN(4);
.text :
{
- cpu/mc9328/start.o (.text)
+ cpu/arm920t/start.o (.text)
*(.text)
}
diff --git a/cpu/mc9328/Makefile b/board/mx1fs2/Makefile
index fccc6ab9123..86aef5c3da8 100644
--- a/cpu/mc9328/Makefile
+++ b/board/mx1fs2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = lib$(BOARD).a
-START = start.o
-OBJS = serial.o interrupts.o cpu.o
+OBJS := mx1fs2.o flash.o
+SOBJS := memsetup.o
-all: .depend $(START) $(LIB)
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-sinclude .depend
+-include .depend
#########################################################################
diff --git a/board/mx1fs2/config.mk b/board/mx1fs2/config.mk
new file mode 100644
index 00000000000..59ab542465f
--- /dev/null
+++ b/board/mx1fs2/config.mk
@@ -0,0 +1,10 @@
+#
+# This config file is used for compilation of IMX sources
+#
+# You might change location of U-Boot in memory by setting right TEXT_BASE.
+# This allows for example having one copy located at the end of ram and stored
+# in flash device and later on while developing use other location to test
+# the code in RAM device only.
+#
+
+TEXT_BASE = 0x08f00000
diff --git a/board/mx1fs2/flash.c b/board/mx1fs2/flash.c
new file mode 100644
index 00000000000..3a79a9eb4b1
--- /dev/null
+++ b/board/mx1fs2/flash.c
@@ -0,0 +1,914 @@
+/*
+ * (C) 2000-2004 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) 2003 August Hoeraendl, Logotronic GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#undef CONFIG_FLASH_16BIT
+
+#include <common.h>
+
+#if defined CFG_JFFS_CUSTOM_PART
+#include <jffs2/jffs2.h>
+#endif
+
+#define FLASH_BANK_SIZE MX1FS2_FLASH_BANK_SIZE
+#define MAIN_SECT_SIZE MX1FS2_FLASH_SECT_SIZE
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*
+ * NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
+ * has nothing to do with the flash chip being 8-bit or 16-bit.
+ */
+#ifdef CONFIG_FLASH_16BIT
+typedef unsigned short FLASH_PORT_WIDTH;
+typedef volatile unsigned short FLASH_PORT_WIDTHV;
+
+#define FLASH_ID_MASK 0xFFFF
+#else
+typedef unsigned long FLASH_PORT_WIDTH;
+typedef volatile unsigned long FLASH_PORT_WIDTHV;
+
+#define FLASH_ID_MASK 0xFFFFFFFF
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define ORMASK(size) ((-size) & OR_AM_MSK)
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+#if 0
+static ulong flash_get_size(FPWV * addr, flash_info_t * info);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+#endif
+static void flash_reset(flash_info_t * info);
+static int write_word_intel(flash_info_t * info, FPWV * dest, FPW data);
+static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data);
+#define write_word(in, de, da) write_word_amd(in, de, da)
+#ifdef CFG_FLASH_PROTECTION
+static void flash_sync_real_protect(flash_info_t * info);
+#endif
+
+#if defined CFG_JFFS_CUSTOM_PART
+
+/**
+ * jffs2_part_info - get information about a JFFS2 partition
+ *
+ * @part_num: number of the partition you want to get info about
+ * @return: struct part_info* in case of success, 0 if failure
+ */
+
+static struct part_info part;
+static int current_part = -1;
+
+struct part_info *
+jffs2_part_info(int part_num)
+{
+ void *jffs2_priv_saved = part.jffs2_priv;
+
+ printf("jffs2_part_info: part_num=%i\n", part_num);
+
+ if (current_part == part_num)
+ return &part;
+
+ /* rootfs */
+ if (part_num == 0) {
+ memset(&part, 0, sizeof (part));
+
+ part.offset = (char *) MX1FS2_JFFS2_PART0_START;
+ part.size = MX1FS2_JFFS2_PART0_SIZE;
+
+ /* Mark the struct as ready */
+ current_part = part_num;
+
+ printf("part.offset = 0x%08x\n", (unsigned int) part.offset);
+ printf("part.size = 0x%08x\n", (unsigned int) part.size);
+ }
+
+ /* userfs */
+ if (part_num == 1) {
+ memset(&part, 0, sizeof (part));
+
+ part.offset = (char *) MX1FS2_JFFS2_PART1_START;
+ part.size = MX1FS2_JFFS2_PART1_SIZE;
+
+ /* Mark the struct as ready */
+ current_part = part_num;
+
+ printf("part.offset = 0x%08x\n", (unsigned int) part.offset);
+ printf("part.size = 0x%08x\n", (unsigned int) part.size);
+ }
+
+ if (current_part == part_num) {
+ part.usr_priv = &current_part;
+ part.jffs2_priv = jffs2_priv_saved;
+ return &part;
+ }
+
+ printf("jffs2_part_info: end of partition table\n");
+ return 0;
+}
+#endif /* CFG_JFFS_CUSTOM_PART */
+
+/*-----------------------------------------------------------------------
+ * flash_init()
+ *
+ * sets up flash_info and returns size of FLASH (bytes)
+ */
+ulong
+flash_init(void)
+{
+ int i, j;
+ ulong size = 0;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ ulong flashbase = 0;
+ flash_info[i].flash_id =
+ (FLASH_MAN_AMD & FLASH_VENDMASK) |
+ (FLASH_AM640U & FLASH_TYPEMASK);
+ flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+ memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ switch (i) {
+ case 0:
+ flashbase = MX1FS2_FLASH_BASE;
+ break;
+ default:
+ panic("configured too many flash banks!\n");
+ break;
+ }
+ for (j = 0; j < flash_info[i].sector_count; j++) {
+ flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE;
+ }
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + _bss_start - _armboot_start,
+ &flash_info[0]);
+
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void
+flash_reset(flash_info_t * info)
+{
+ FPWV *base = (FPWV *) (info->start[0]);
+
+ /* Put FLASH back in read mode */
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
+ *base = (FPW) 0x00FF00FF; /* Intel Read Mode */
+ else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
+ *base = (FPW) 0x00F000F0; /* AMD Read Mode */
+}
+
+/*-----------------------------------------------------------------------
+ */
+#if 0
+static void
+flash_get_offsets(ulong base, flash_info_t * info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
+ && (info->flash_id & FLASH_BTYPE)) {
+ int bootsect_size; /* number of bytes/boot sector */
+ int sect_size; /* number of bytes/regular sector */
+
+ bootsect_size = 0x00002000 * (sizeof (FPW) / 2);
+ sect_size = 0x00010000 * (sizeof (FPW) / 2);
+
+ /* set sector offsets for bottom boot block type */
+ for (i = 0; i < 8; ++i) {
+ info->start[i] = base + (i * bootsect_size);
+ }
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = base + ((i - 7) * sect_size);
+ }
+ } else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
+ && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
+
+ int sect_size; /* number of bytes/sector */
+
+ sect_size = 0x00010000 * (sizeof (FPW) / 2);
+
+ /* set up sector start address table (uniform sector type) */
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * sect_size);
+ }
+}
+#endif /* 0 */
+
+/*-----------------------------------------------------------------------
+ */
+
+void
+flash_print_info(flash_info_t * info)
+{
+ int i;
+ uchar *boottype;
+ uchar *bootletter;
+ uchar *fmt;
+ uchar botbootletter[] = "B";
+ uchar topbootletter[] = "T";
+ uchar botboottype[] = "bottom boot sector";
+ uchar topboottype[] = "top boot sector";
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ printf("AMD ");
+ break;
+ case FLASH_MAN_BM:
+ printf("BRIGHT MICRO ");
+ break;
+ case FLASH_MAN_FUJ:
+ printf("FUJITSU ");
+ break;
+ case FLASH_MAN_SST:
+ printf("SST ");
+ break;
+ case FLASH_MAN_STM:
+ printf("STM ");
+ break;
+ case FLASH_MAN_INTEL:
+ printf("INTEL ");
+ break;
+ default:
+ printf("Unknown Vendor ");
+ break;
+ }
+
+ /* check for top or bottom boot, if it applies */
+ if (info->flash_id & FLASH_BTYPE) {
+ boottype = botboottype;
+ bootletter = botbootletter;
+ } else {
+ boottype = topboottype;
+ bootletter = topbootletter;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM640U:
+ fmt = "29LV641D (64 Mbit, uniform sectors)\n";
+ break;
+ case FLASH_28F800C3B:
+ case FLASH_28F800C3T:
+ fmt = "28F800C3%s (8 Mbit, %s)\n";
+ break;
+ case FLASH_INTEL800B:
+ case FLASH_INTEL800T:
+ fmt = "28F800B3%s (8 Mbit, %s)\n";
+ break;
+ case FLASH_28F160C3B:
+ case FLASH_28F160C3T:
+ fmt = "28F160C3%s (16 Mbit, %s)\n";
+ break;
+ case FLASH_INTEL160B:
+ case FLASH_INTEL160T:
+ fmt = "28F160B3%s (16 Mbit, %s)\n";
+ break;
+ case FLASH_28F320C3B:
+ case FLASH_28F320C3T:
+ fmt = "28F320C3%s (32 Mbit, %s)\n";
+ break;
+ case FLASH_INTEL320B:
+ case FLASH_INTEL320T:
+ fmt = "28F320B3%s (32 Mbit, %s)\n";
+ break;
+ case FLASH_28F640C3B:
+ case FLASH_28F640C3T:
+ fmt = "28F640C3%s (64 Mbit, %s)\n";
+ break;
+ case FLASH_INTEL640B:
+ case FLASH_INTEL640T:
+ fmt = "28F640B3%s (64 Mbit, %s)\n";
+ break;
+ default:
+ fmt = "Unknown Chip Type\n";
+ break;
+ }
+
+ printf(fmt, bootletter, boottype);
+
+ printf(" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf(" Sector Start Addresses:");
+
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0) {
+ printf("\n ");
+ }
+
+ printf(" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+
+ printf("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+#if 0
+ulong
+flash_get_size(FPWV * addr, flash_info_t * info)
+{
+ /* Write auto select command: read Manufacturer ID */
+
+ /* Write auto select command sequence and test FLASH answer */
+ addr[0x0555] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */
+ addr[0x02AA] = (FPW) 0x00550055; /* for AMD, Intel ignores this */
+ addr[0x0555] = (FPW) 0x00900090; /* selects Intel or AMD */
+
+ /* The manufacturer codes are only 1 byte, so just use 1 byte.
+ * This works for any bus width and any FLASH device width.
+ */
+ switch (addr[0] & 0xff) {
+
+ case (uchar) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+
+ case (uchar) INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ break;
+ }
+
+ /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
+ if (info->flash_id != FLASH_UNKNOWN)
+ switch (addr[1]) {
+
+ case (FPW) AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */
+ info->flash_id += FLASH_AM640U;
+ info->sector_count = 128;
+ info->size = 0x00800000 * (sizeof (FPW) / 2);
+ break; /* => 8 or 16 MB */
+
+ case (FPW) INTEL_ID_28F800C3B:
+ info->flash_id += FLASH_28F800C3B;
+ info->sector_count = 23;
+ info->size = 0x00100000 * (sizeof (FPW) / 2);
+ break; /* => 1 or 2 MB */
+
+ case (FPW) INTEL_ID_28F800B3B:
+ info->flash_id += FLASH_INTEL800B;
+ info->sector_count = 23;
+ info->size = 0x00100000 * (sizeof (FPW) / 2);
+ break; /* => 1 or 2 MB */
+
+ case (FPW) INTEL_ID_28F160C3B:
+ info->flash_id += FLASH_28F160C3B;
+ info->sector_count = 39;
+ info->size = 0x00200000 * (sizeof (FPW) / 2);
+ break; /* => 2 or 4 MB */
+
+ case (FPW) INTEL_ID_28F160B3B:
+ info->flash_id += FLASH_INTEL160B;
+ info->sector_count = 39;
+ info->size = 0x00200000 * (sizeof (FPW) / 2);
+ break; /* => 2 or 4 MB */
+
+ case (FPW) INTEL_ID_28F320C3B:
+ info->flash_id += FLASH_28F320C3B;
+ info->sector_count = 71;
+ info->size = 0x00400000 * (sizeof (FPW) / 2);
+ break; /* => 4 or 8 MB */
+
+ case (FPW) INTEL_ID_28F320B3B:
+ info->flash_id += FLASH_INTEL320B;
+ info->sector_count = 71;
+ info->size = 0x00400000 * (sizeof (FPW) / 2);
+ break; /* => 4 or 8 MB */
+
+ case (FPW) INTEL_ID_28F640C3B:
+ info->flash_id += FLASH_28F640C3B;
+ info->sector_count = 135;
+ info->size = 0x00800000 * (sizeof (FPW) / 2);
+ break; /* => 8 or 16 MB */
+
+ case (FPW) INTEL_ID_28F640B3B:
+ info->flash_id += FLASH_INTEL640B;
+ info->sector_count = 135;
+ info->size = 0x00800000 * (sizeof (FPW) / 2);
+ break; /* => 8 or 16 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* => no or unknown flash */
+ }
+
+ flash_get_offsets((ulong) addr, info);
+
+ /* Put FLASH back in read mode */
+ flash_reset(info);
+
+ return (info->size);
+}
+#endif /* 0 */
+
+#ifdef CFG_FLASH_PROTECTION
+/*-----------------------------------------------------------------------
+ */
+
+static void
+flash_sync_real_protect(flash_info_t * info)
+{
+ FPWV *addr = (FPWV *) (info->start[0]);
+ FPWV *sect;
+ int i;
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F800C3B:
+ case FLASH_28F800C3T:
+ case FLASH_28F160C3B:
+ case FLASH_28F160C3T:
+ case FLASH_28F320C3B:
+ case FLASH_28F320C3T:
+ case FLASH_28F640C3B:
+ case FLASH_28F640C3T:
+ /* check for protected sectors */
+ *addr = (FPW) 0x00900090;
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02.
+ * D0 = 1 for each device if protected.
+ * If at least one device is protected the sector is marked
+ * protected, but mixed protected and unprotected devices
+ * within a sector should never happen.
+ */
+ sect = (FPWV *) (info->start[i]);
+ info->protect[i] =
+ (sect[2] & (FPW) (0x00010001)) ? 1 : 0;
+ }
+
+ /* Put FLASH back in read mode */
+ flash_reset(info);
+ break;
+
+ case FLASH_AM640U:
+ default:
+ /* no hardware protect that we support */
+ break;
+ }
+}
+#endif
+
+/*-----------------------------------------------------------------------
+ */
+
+int
+flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+ FPWV *addr;
+ int flag, prot, sect;
+ int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
+ ulong start, now, last;
+ int rcode = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("- missing\n");
+ } else {
+ printf("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_INTEL800B:
+ case FLASH_INTEL160B:
+ case FLASH_INTEL320B:
+ case FLASH_INTEL640B:
+ case FLASH_28F800C3B:
+ case FLASH_28F160C3B:
+ case FLASH_28F320C3B:
+ case FLASH_28F640C3B:
+ case FLASH_AM640U:
+ break;
+ case FLASH_UNKNOWN:
+ default:
+ printf("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf("\n");
+ }
+
+ start = get_timer(0);
+ last = start;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last && rcode == 0; sect++) {
+
+ if (info->protect[sect] != 0) /* protected, skip it */
+ continue;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr = (FPWV *) (info->start[sect]);
+ if (intel) {
+ *addr = (FPW) 0x00500050; /* clear status register */
+ *addr = (FPW) 0x00200020; /* erase setup */
+ *addr = (FPW) 0x00D000D0; /* erase confirm */
+ } else {
+ /* must be AMD style if not Intel */
+ FPWV *base; /* first address in bank */
+
+ base = (FPWV *) (info->start[0]);
+ base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
+ base[0x02AA] = (FPW) 0x00550055; /* unlock */
+ base[0x0555] = (FPW) 0x00800080; /* erase mode */
+ base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
+ base[0x02AA] = (FPW) 0x00550055; /* unlock */
+ *addr = (FPW) 0x00300030; /* erase sector */
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 50us for AMD, 80us for Intel.
+ * Let's wait 1 ms.
+ */
+ udelay(1000);
+
+ while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if ((now = get_timer(0)) - start > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+
+ if (intel) {
+ /* suspend erase */
+ *addr = (FPW) 0x00B000B0;
+ }
+
+ flash_reset(info); /* reset to read mode */
+ rcode = 1; /* failed */
+ break;
+ }
+
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ }
+
+ flash_reset(info); /* reset to read mode */
+ }
+
+ printf(" done\n");
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int
+bad_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
+ int bytes; /* number of bytes to program in current word */
+ int left; /* number of bytes left to program */
+ int i, res;
+
+ for (left = cnt, res = 0;
+ left > 0 && res == 0;
+ addr += sizeof (data), left -= sizeof (data) - bytes) {
+
+ bytes = addr & (sizeof (data) - 1);
+ addr &= ~(sizeof (data) - 1);
+
+ /* combine source and destination data so can program
+ * an entire word of 16 or 32 bits
+ */
+ for (i = 0; i < sizeof (data); i++) {
+ data <<= 8;
+ if (i < bytes || i - bytes >= left)
+ data += *((uchar *) addr + i);
+ else
+ data += *src++;
+ }
+
+ /* write one word to the flash */
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ res = write_word_amd(info, (FPWV *) addr, data);
+ break;
+ case FLASH_MAN_INTEL:
+ res = write_word_intel(info, (FPWV *) addr, data);
+ break;
+ default:
+ /* unknown flash type, error! */
+ printf("missing or unknown FLASH type\n");
+ res = 1; /* not really a timeout, but gives error */
+ break;
+ }
+ }
+
+ return (res);
+}
+
+/**
+ * write_buf: - Copy memory to flash.
+ *
+ * @param info:
+ * @param src: source of copy transaction
+ * @param addr: where to copy to
+ * @param cnt: number of bytes to copy
+ *
+ * @return error code
+ */
+
+int
+write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ FPW data;
+ int l;
+ int i, rc;
+
+ wp = (addr & ~1); /* get lower word aligned address */
+
+ /* handle unaligned start bytes */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 8);
+ }
+ for (; i < 2 && cnt > 0; ++i) {
+ data = (data >> 8) | (*src++ << 8);
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 2; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 8);
+ }
+
+ if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 2;
+ }
+
+ /* handle word aligned part */
+ while (cnt >= 2) {
+ /* data = *((vushort*)src); */
+ data = *((FPW *) src);
+ if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
+ return (rc);
+ }
+ src += sizeof (FPW);
+ wp += sizeof (FPW);
+ cnt -= sizeof (FPW);
+ }
+
+ if (cnt == 0)
+ return ERR_OK;
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
+ data = (data >> 8) | (*src++ << 8);
+ --cnt;
+ }
+ for (; i < 2; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 8);
+ }
+
+ return write_word(info, (FPWV *)wp, data);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash for AMD FLASH
+ * A word is 16 or 32 bits, whichever the bus width of the flash bank
+ * (not an individual chip) is.
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int
+write_word_amd(flash_info_t * info, FPWV * dest, FPW data)
+{
+ ulong start;
+ int flag;
+ int res = 0; /* result, assume success */
+ FPWV *base; /* first address in flash bank */
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dest & data) != data) {
+ return (2);
+ }
+
+ base = (FPWV *) (info->start[0]);
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
+ base[0x02AA] = (FPW) 0x00550055; /* unlock */
+ base[0x0555] = (FPW) 0x00A000A0; /* selects program mode */
+
+ *dest = data; /* start programming the data */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer(0);
+
+ /* data polling for D7 */
+ while (res == 0
+ && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
+ if (get_timer(0) - start > CFG_FLASH_WRITE_TOUT) {
+ *dest = (FPW) 0x00F000F0; /* reset bank */
+ printf("SHA timeout\n");
+ res = 1;
+ }
+ }
+
+ return (res);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash for Intel FLASH
+ * A word is 16 or 32 bits, whichever the bus width of the flash bank
+ * (not an individual chip) is.
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int
+write_word_intel(flash_info_t * info, FPWV * dest, FPW data)
+{
+ ulong start;
+ int flag;
+ int res = 0; /* result, assume success */
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dest & data) != data) {
+ return (2);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *dest = (FPW) 0x00500050; /* clear status register */
+ *dest = (FPW) 0x00FF00FF; /* make sure in read mode */
+ *dest = (FPW) 0x00400040; /* program setup */
+
+ *dest = data; /* start programming the data */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer(0);
+
+ while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *dest = (FPW) 0x00B000B0; /* Suspend program */
+ res = 1;
+ }
+ }
+
+ if (res == 0 && (*dest & (FPW) 0x00100010))
+ res = 1; /* write failed, time out error is close enough */
+
+ *dest = (FPW) 0x00500050; /* clear status register */
+ *dest = (FPW) 0x00FF00FF; /* make sure in read mode */
+
+ return (res);
+}
+
+#ifdef CFG_FLASH_PROTECTION
+/*-----------------------------------------------------------------------
+ */
+int
+flash_real_protect(flash_info_t * info, long sector, int prot)
+{
+ int rcode = 0; /* assume success */
+ FPWV *addr; /* address of sector */
+ FPW value;
+
+ addr = (FPWV *) (info->start[sector]);
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F800C3B:
+ case FLASH_28F800C3T:
+ case FLASH_28F160C3B:
+ case FLASH_28F160C3T:
+ case FLASH_28F320C3B:
+ case FLASH_28F320C3T:
+ case FLASH_28F640C3B:
+ case FLASH_28F640C3T:
+ flash_reset(info); /* make sure in read mode */
+ *addr = (FPW) 0x00600060L; /* lock command setup */
+ if (prot)
+ *addr = (FPW) 0x00010001L; /* lock sector */
+ else
+ *addr = (FPW) 0x00D000D0L; /* unlock sector */
+ flash_reset(info); /* reset to read mode */
+
+ /* now see if it really is locked/unlocked as requested */
+ *addr = (FPW) 0x00900090;
+ /* read sector protection at sector address, (A7 .. A0) = 0x02.
+ * D0 = 1 for each device if protected.
+ * If at least one device is protected the sector is marked
+ * protected, but return failure. Mixed protected and
+ * unprotected devices within a sector should never happen.
+ */
+ value = addr[2] & (FPW) 0x00010001;
+ if (value == 0)
+ info->protect[sector] = 0;
+ else if (value == (FPW) 0x00010001)
+ info->protect[sector] = 1;
+ else {
+ /* error, mixed protected and unprotected */
+ rcode = 1;
+ info->protect[sector] = 1;
+ }
+ if (info->protect[sector] != prot)
+ rcode = 1; /* failed to protect/unprotect as requested */
+
+ /* reload all protection bits from hardware for now */
+ flash_sync_real_protect(info);
+ break;
+
+ case FLASH_AM640U:
+ default:
+ /* no hardware protect that we support */
+ info->protect[sector] = prot;
+ break;
+ }
+
+ return rcode;
+}
+#endif
diff --git a/board/mx1fs2/intel.h b/board/mx1fs2/intel.h
new file mode 100644
index 00000000000..8db5dd4f64c
--- /dev/null
+++ b/board/mx1fs2/intel.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2002 ETC s.r.o.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the ETC s.r.o. nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Written by Marcel Telka <marcel@telka.sk>, 2002.
+ *
+ * Documentation:
+ * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
+ * 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
+ * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
+ * 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
+ *
+ * This file is taken from OpenWinCE project hosted by SourceForge.net
+ *
+ */
+
+#ifndef FLASH_INTEL_H
+#define FLASH_INTEL_H
+
+#include <common.h>
+
+/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
+
+#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */
+
+/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
+
+#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */
+
+/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
+
+#define CFI_CHIP_INTEL_28F320J3A 0x0016
+#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A"
+#define CFI_CHIP_INTEL_28F640J3A 0x0017
+#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A"
+#define CFI_CHIP_INTEL_28F128J3A 0x0018
+#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A"
+
+/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
+
+#define CFI_CHIP_INTEL_28F640K3 0x8801
+#define CFI_CHIPN_INTEL_28F640K3 "28F640K3"
+#define CFI_CHIP_INTEL_28F128K3 0x8802
+#define CFI_CHIPN_INTEL_28F128K3 "28F128K3"
+#define CFI_CHIP_INTEL_28F256K3 0x8803
+#define CFI_CHIPN_INTEL_28F256K3 "28F256K3"
+#define CFI_CHIP_INTEL_28F640K18 0x8805
+#define CFI_CHIPN_INTEL_28F640K18 "28F640K18"
+#define CFI_CHIP_INTEL_28F128K18 0x8806
+#define CFI_CHIPN_INTEL_28F128K18 "28F128K18"
+#define CFI_CHIP_INTEL_28F256K18 0x8807
+#define CFI_CHIPN_INTEL_28F256K18 "28F256K18"
+
+#endif /* FLASH_INTEL_H */
diff --git a/board/mx1fs2/memsetup.S b/board/mx1fs2/memsetup.S
new file mode 100644
index 00000000000..5ec751b73dd
--- /dev/null
+++ b/board/mx1fs2/memsetup.S
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ * 02111-1307, USA.
+ *
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/imx-regs.h>
+
+.globl memsetup
+memsetup:
+
+ mov r10, lr
+
+/* Change PERCLK1DIV to 14 ie 14+1 */
+ ldr r0, =PCDR
+ ldr r1, =CFG_PCDR_VAL
+ str r1, [r0]
+
+/* set MCU PLL Control Register 0 */
+
+ ldr r0, =MPCTL0
+ ldr r1, =CFG_MPCTL0_VAL
+ str r1, [r0]
+
+/* set MCU PLL Control Register 1 */
+
+ ldr r0, =MPCTL1
+ ldr r1, =CFG_MPCTL1_VAL
+ str r1, [r0]
+
+/* set mpll restart bit */
+ ldr r0, =CSCR
+ ldr r1, [r0]
+ orr r1,r1,#(1<<21)
+ str r1, [r0]
+
+ mov r2,#0x10
+1:
+ mov r3,#0x2000
+2:
+ subs r3,r3,#1
+ bne 2b
+
+ subs r2,r2,#1
+ bne 1b
+
+/* set System PLL Control Register 0 */
+
+ ldr r0, =SPCTL0
+ ldr r1, =CFG_SPCTL0_VAL
+ str r1, [r0]
+
+/* set System PLL Control Register 1 */
+
+ ldr r0, =SPCTL1
+ ldr r1, =CFG_SPCTL1_VAL
+ str r1, [r0]
+
+/* set spll restart bit */
+ ldr r0, =CSCR
+ ldr r1, [r0]
+ orr r1,r1,#(1<<22)
+ str r1, [r0]
+
+ mov r2,#0x10
+1:
+ mov r3,#0x2000
+2:
+ subs r3,r3,#1
+ bne 2b
+
+ subs r2,r2,#1
+ bne 1b
+
+ ldr r0, =CSCR
+ ldr r1, =CFG_CSCR_VAL
+ str r1, [r0]
+
+ ldr r0, =GPCR
+ ldr r1, =CFG_GPCR_VAL
+ str r1, [r0]
+
+/*
+ * I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
+ * this.....
+ *
+ * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
+ * register 1, this stops it using the output of the PLL and thus runs at the
+ * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
+ * use the value set in the CM_OSC registers...regardless of what you set it
+ * too! Thus, although i thought i was running at 140MHz, i'm actually running
+ * at 40!..
+ *
+ * Slapping this into my bootloader does the trick...
+ *
+ * MRC p15,0,r0,c1,c0,0 ; read core configuration register
+ * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode
+ * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration
+ * register
+ *
+ */
+ MRC p15,0,r0,c1,c0,0
+/* ORR r0,r0,#0xC0000000 async mode */
+/* ORR r0,r0,#0x40000000 sync mode */
+ ORR r0,r0,#0xC0000000
+ MCR p15,0,r0,c1,c0,0
+
+ ldr r0, =GIUS(0)
+ ldr r1, =CFG_GIUS_A_VAL
+ str r1, [r0]
+
+ ldr r0, =FMCR
+ ldr r1, =CFG_FMCR_VAL
+ str r1, [r0]
+
+ ldr r0, =CS0U
+ ldr r1, =CFG_CS0U_VAL
+ str r1, [r0]
+
+ ldr r0, =CS0L
+ ldr r1, =CFG_CS0L_VAL
+ str r1, [r0]
+
+ ldr r0, =CS1U
+ ldr r1, =CFG_CS1U_VAL
+ str r1, [r0]
+
+ ldr r0, =CS1L
+ ldr r1, =CFG_CS1L_VAL
+ str r1, [r0]
+
+ ldr r0, =CS4U
+ ldr r1, =CFG_CS4U_VAL
+ str r1, [r0]
+
+ ldr r0, =CS4L
+ ldr r1, =CFG_CS4L_VAL
+ str r1, [r0]
+
+ ldr r0, =CS5U
+ ldr r1, =CFG_CS5U_VAL
+ str r1, [r0]
+
+ ldr r0, =CS5L
+ ldr r1, =CFG_CS5L_VAL
+ str r1, [r0]
+
+/* SDRAM Setup */
+
+ ldr r1,=0x00221000 /* adr of SDCTRL0 */
+ ldr r0,=0x92120200
+ str r0,[r1,#0] /* put in precharge command mode */
+ ldr r2,=0x08200000 /* adr for precharge cmd */
+ ldr r0,[r2,#0] /* precharge */
+ ldr r0,=0xA2120200
+ ldr r2,=0x08000000 /* start of SDRAM */
+ str r0,[r1,#0] /* put in auto-refresh mode */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,[r2,#0] /* auto-refresh */
+ ldr r0,=0xB2120200
+ ldr r2,=0x08111800
+ str r0,[r1,#0] /* setup for mode register of SDRAM */
+ ldr r0,[r2,#0] /* program mode register */
+ ldr r0,=0x82124267
+ str r0,[r1,#0] /* back to normal operation */
+
+ mov pc,r10
diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c
new file mode 100644
index 00000000000..f51085a9791
--- /dev/null
+++ b/board/mx1fs2/mx1fs2.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#include <asm/arch/imx-regs.h>
+
+#define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
+
+extern void imx_gpio_mode(int gpio_mode);
+
+static void logo_init(void)
+{
+ imx_gpio_mode(PD15_PF_LD0);
+ imx_gpio_mode(PD16_PF_LD1);
+ imx_gpio_mode(PD17_PF_LD2);
+ imx_gpio_mode(PD18_PF_LD3);
+ imx_gpio_mode(PD19_PF_LD4);
+ imx_gpio_mode(PD20_PF_LD5);
+ imx_gpio_mode(PD21_PF_LD6);
+ imx_gpio_mode(PD22_PF_LD7);
+ imx_gpio_mode(PD23_PF_LD8);
+ imx_gpio_mode(PD24_PF_LD9);
+ imx_gpio_mode(PD25_PF_LD10);
+ imx_gpio_mode(PD26_PF_LD11);
+ imx_gpio_mode(PD27_PF_LD12);
+ imx_gpio_mode(PD28_PF_LD13);
+ imx_gpio_mode(PD29_PF_LD14);
+ imx_gpio_mode(PD30_PF_LD15);
+ imx_gpio_mode(PD14_PF_FLM_VSYNC);
+ imx_gpio_mode(PD13_PF_LP_HSYNC);
+ imx_gpio_mode(PD6_PF_LSCLK);
+ imx_gpio_mode(GPIO_PORTD | GPIO_OUT | GPIO_GPIO);
+ imx_gpio_mode(PD11_PF_CONTRAST);
+ imx_gpio_mode(PD10_PF_SPL_SPR);
+
+ LCDC_RMCR = 0x00000000;
+ LCDC_PCR = PCR_COLOR | PCR_PBSIZ_8 | PCR_BPIX_16 | PCR_PCD(5);
+ LCDC_HCR = HCR_H_WIDTH(2);
+ LCDC_VCR = VCR_V_WIDTH(2);
+
+ LCDC_PWMR = 0x00000380; /* contrast to 0x80 middle (is best !!!) */
+ LCDC_SSA = 0x10040000; /* image in flash */
+
+ LCDC_SIZE = SIZE_XMAX(320) | SIZE_YMAX(240); /* screen size */
+
+ LCDC_VPW = 0x000000A0; /* Virtual Page Width Register */
+ LCDC_POS = 0x00000000; /* panning offset 0 (0 pixel offset) */
+
+ /* disable Cursor */
+ LCDC_CPOS = 0x00000000;
+
+ /* fixed burst length */
+ LCDC_DMACR = DMACR_BURST | DMACR_HM(8) | DMACR_TM(2);
+
+ /* enable LCD */
+ DR(3) |= 0x00001000;
+ LCDC_RMCR = RMCR_LCDC_EN;
+
+}
+
+int
+board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_arch_number = 470;
+ gd->bd->bi_boot_params = 0x08000100;
+serial_init();
+ logo_init();
+ return 0;
+}
+
+int
+dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+#if ( CONFIG_NR_DRAM_BANKS > 0 )
+ gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1;
+ gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE;
+#endif
+ return 0;
+}
+
+/**
+ * show_boot_progress: - indicate state of the boot process
+ *
+ * @param status: Status number - see README for details.
+ *
+ */
+
+void
+show_boot_progress(int status)
+{
+ /* We use this as a hook to disable serial ports just before booting
+ * This way we suppress the "uncompressing linux..." message
+ */
+#ifdef CONFIG_SILENT_CONSOLE
+ if( status == 8) {
+ if( getenv("silent") != NULL ) {
+ *(volatile unsigned long *)0x206080 &= ~1;
+ *(volatile unsigned long *)0x207080 &= ~1;
+ }
+ }
+#endif
+ return;
+}
diff --git a/board/mx1fs2/u-boot.lds b/board/mx1fs2/u-boot.lds
new file mode 100644
index 00000000000..5076303c7ef
--- /dev/null
+++ b/board/mx1fs2/u-boot.lds
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm920t/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/board/netphone/phone_console.c b/board/netphone/phone_console.c
index dd599693784..408ada01692 100644
--- a/board/netphone/phone_console.c
+++ b/board/netphone/phone_console.c
@@ -326,7 +326,6 @@ int phone_getc(void)
int drv_phone_init(void)
{
device_t console_dev;
- char *penv;
console_init();
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index a784e3426a1..1aed61b6dd4 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -256,11 +256,13 @@ long int initdram (int board_type)
long dram_size = 0;
extern long spd_sdram (void);
volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#if 0
#if !defined(CONFIG_RAM_AS_FLASH)
volatile ccsr_lbc_t *lbc= &immap->im_lbc;
sys_info_t sysinfo;
uint temp_lbcdll = 0;
#endif
+#endif /* 0 */
#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
volatile ccsr_gur_t *gur= &immap->im_gur;
#endif
@@ -279,7 +281,7 @@ long int initdram (int board_type)
dram_size = fixed_sdram ();
#endif
-#if XXX
+#if 0
#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
get_sys_info(&sysinfo);
/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
diff --git a/cpu/mc9328/config.mk b/board/scb9328/Makefile
index cef7d26f1cb..212efcc4e55 100644
--- a/cpu/mc9328/config.mk
+++ b/board/scb9328/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -21,7 +21,27 @@
# MA 02111-1307 USA
#
-PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
- -mshort-load-bytes -msoft-float
+include $(TOPDIR)/config.mk
-PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4
+LIB = lib$(BOARD).a
+
+OBJS := scb9328.o flash.o
+SOBJS := memsetup.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/scb9328/config.mk b/board/scb9328/config.mk
new file mode 100644
index 00000000000..8d1d79ac906
--- /dev/null
+++ b/board/scb9328/config.mk
@@ -0,0 +1,10 @@
+#
+# This config file is used for compilation of scb93328 sources
+#
+# You might change location of U-Boot in memory by setting right TEXT_BASE.
+# This allows for example having one copy located at the end of ram and stored
+# in flash device and later on while developing use other location to test
+# the code in RAM device only.
+#
+
+TEXT_BASE = 0x08f00000
diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c
new file mode 100644
index 00000000000..1b56f8c6aaa
--- /dev/null
+++ b/board/scb9328/flash.c
@@ -0,0 +1,321 @@
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This code was inspired by Marius Groeger and Kyle Harris code
+ * available in other board ports for U-Boot
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ */
+
+#include <common.h>
+#include "intel.h"
+
+
+/*
+ * This code should handle CFI FLASH memory device. This code is very
+ * minimalistic approach without many essential error handling code as well.
+ * Because U-Boot actually is missing smart handling of FLASH device,
+ * we just set flash_id to anything else to FLASH_UNKNOW, so common code
+ * can call us without any restrictions.
+ * TODO: Add CFI Query, to be able to determine FLASH device.
+ * TODO: Add error handling code
+ * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but
+ * hopefully may work with other configurations.
+ */
+
+#if ( SCB9328_FLASH_BUS_WIDTH == 1 )
+# define FLASH_BUS vu_char
+# if ( SCB9328_FLASH_INTERLEAVE == 1 )
+# define FLASH_CMD( x ) x
+# else
+# error "With 8bit bus only one chip is allowed"
+# endif
+
+
+#elif ( SCB9328_FLASH_BUS_WIDTH == 2 )
+# define FLASH_BUS vu_short
+# if ( SCB9328_FLASH_INTERLEAVE == 1 )
+# define FLASH_CMD( x ) x
+# elif ( SCB9328_FLASH_INTERLEAVE == 2 )
+# define FLASH_CMD( x ) (( x << 8 )| x )
+# else
+# error "With 16bit bus only 1 or 2 chip(s) are allowed"
+# endif
+
+
+#elif ( SCB9328_FLASH_BUS_WIDTH == 4 )
+# define FLASH_BUS vu_long
+# if ( SCB9328_FLASH_INTERLEAVE == 1 )
+# define FLASH_CMD( x ) x
+# elif ( SCB9328_FLASH_INTERLEAVE == 2 )
+# define FLASH_CMD( x ) (( x << 16 )| x )
+# elif ( SCB9328_FLASH_INTERLEAVE == 4 )
+# define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x )
+# else
+# error "With 32bit bus only 1,2 or 4 chip(s) are allowed"
+# endif
+
+#else
+# error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration"
+#endif
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+static FLASH_BUS flash_status_reg (void)
+{
+
+ FLASH_BUS *addr = (FLASH_BUS *) 0;
+
+ *addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
+
+ return *addr;
+}
+
+static int flash_ready (ulong timeout)
+{
+ int ok = 1;
+
+ reset_timer_masked ();
+ while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) !=
+ FLASH_CMD (CFI_INTEL_SR_READY)) {
+ if (get_timer_masked () > timeout && timeout != 0) {
+ ok = 0;
+ break;
+ }
+ }
+ return ok;
+}
+
+#if ( CFG_MAX_FLASH_BANKS != 1 )
+# error "SCB9328 platform has only one flash bank!"
+#endif
+
+
+ulong flash_init (void)
+{
+ int i;
+ unsigned long address = SCB9328_FLASH_BASE;
+
+ flash_info[0].size = SCB9328_FLASH_BANK_SIZE;
+ flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
+ flash_info[0].flash_id = INTEL_MANUFACT;
+ memset (flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
+
+ for (i = 0; i < CFG_MAX_FLASH_SECT; i++) {
+ flash_info[0].start[i] = address;
+#ifdef SCB9328_FLASH_UNLOCK
+ /* Some devices are hw locked after start. */
+ *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP);
+ *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK);
+ flash_ready (0);
+ *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+#endif
+ address += SCB9328_FLASH_SECT_SIZE;
+ }
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+ return SCB9328_FLASH_BANK_SIZE;
+}
+
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ printf (" Intel vendor\n");
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if (!(i % 5)) {
+ printf ("\n");
+ }
+
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+}
+
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ int flag, non_protected = 0, sector;
+ int rc = ERR_OK;
+
+ FLASH_BUS *address;
+
+ for (sector = s_first; sector <= s_last; sector++) {
+ if (!info->protect[sector]) {
+ non_protected++;
+ }
+ }
+
+ if (!non_protected) {
+ return ERR_PROTECTED;
+ }
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ flag = disable_interrupts ();
+
+
+ /* Start erase on unprotected sectors */
+ for (sector = s_first; sector <= s_last && !ctrlc (); sector++) {
+ if (info->protect[sector]) {
+ printf ("Protected sector %2d skipping...\n", sector);
+ continue;
+ } else {
+ printf ("Erasing sector %2d ... ", sector);
+ }
+
+ address = (FLASH_BUS *) (info->start[sector]);
+
+ *address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
+ *address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
+ if (flash_ready (CFG_FLASH_ERASE_TOUT)) {
+ *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
+ printf ("ok.\n");
+ } else {
+ *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
+ rc = ERR_TIMOUT;
+ printf ("timeout! Aborting...\n");
+ break;
+ }
+ *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+ }
+ if (ctrlc ())
+ printf ("User Interrupt!\n");
+
+ /* allow flash to settle - wait 10 ms */
+ udelay_masked (10000);
+ if (flag) {
+ enable_interrupts ();
+ }
+
+ return rc;
+}
+
+static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
+{
+ FLASH_BUS *address = (FLASH_BUS *) dest;
+ int rc = ERR_OK;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*address & data) != data) {
+ return ERR_NOT_ERASED;
+ }
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+
+ flag = disable_interrupts ();
+
+ *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
+ *address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
+ *address = data;
+
+ if (!flash_ready (CFG_FLASH_WRITE_TOUT)) {
+ *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
+ rc = ERR_TIMOUT;
+ printf ("timeout! Aborting...\n");
+ }
+
+ *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+ if (flag) {
+ enable_interrupts ();
+ }
+
+ return rc;
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong read_addr, write_addr;
+ FLASH_BUS data;
+ int i, result = ERR_OK;
+
+
+ read_addr = addr & ~(sizeof (FLASH_BUS) - 1);
+ write_addr = read_addr;
+ if (read_addr != addr) {
+ data = 0;
+ for (i = 0; i < sizeof (FLASH_BUS); i++) {
+ if (read_addr < addr || cnt == 0) {
+ data |= *((uchar *) read_addr) << i * 8;
+ } else {
+ data |= (*src++) << i * 8;
+ cnt--;
+ }
+ read_addr++;
+ }
+ if ((result = write_data (info, write_addr, data)) != ERR_OK) {
+ return result;
+ }
+ write_addr += sizeof (FLASH_BUS);
+ }
+ for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) {
+ if ((result = write_data (info, write_addr,
+ *((FLASH_BUS *) src))) != ERR_OK) {
+ return result;
+ }
+ write_addr += sizeof (FLASH_BUS);
+ src += sizeof (FLASH_BUS);
+ }
+ if (cnt > 0) {
+ read_addr = write_addr;
+ data = 0;
+ for (i = 0; i < sizeof (FLASH_BUS); i++) {
+ if (cnt > 0) {
+ data |= (*src++) << i * 8;
+ cnt--;
+ } else {
+ data |= *((uchar *) read_addr) << i * 8;
+ }
+ read_addr++;
+ }
+ if ((result = write_data (info, write_addr, data)) != 0) {
+ return result;
+ }
+ }
+ return ERR_OK;
+}
diff --git a/board/scb9328/intel.h b/board/scb9328/intel.h
new file mode 100644
index 00000000000..77498b6e1df
--- /dev/null
+++ b/board/scb9328/intel.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2002 ETC s.r.o.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the ETC s.r.o. nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Written by Marcel Telka <marcel@telka.sk>, 2002.
+ *
+ * Documentation:
+ * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
+ * 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
+ * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
+ * 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
+ *
+ * This file is taken from OpenWinCE project hosted by SourceForge.net
+ *
+ */
+
+#ifndef FLASH_INTEL_H
+#define FLASH_INTEL_H
+
+#include <common.h>
+
+/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
+
+#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
+#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */
+
+/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
+
+#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */
+
+/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
+
+#define CFI_CHIP_INTEL_28F320J3A 0x0016
+#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A"
+#define CFI_CHIP_INTEL_28F640J3A 0x0017
+#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A"
+#define CFI_CHIP_INTEL_28F128J3A 0x0018
+#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A"
+
+/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
+
+#define CFI_CHIP_INTEL_28F640K3 0x8801
+#define CFI_CHIPN_INTEL_28F640K3 "28F640K3"
+#define CFI_CHIP_INTEL_28F128K3 0x8802
+#define CFI_CHIPN_INTEL_28F128K3 "28F128K3"
+#define CFI_CHIP_INTEL_28F256K3 0x8803
+#define CFI_CHIPN_INTEL_28F256K3 "28F256K3"
+#define CFI_CHIP_INTEL_28F640K18 0x8805
+#define CFI_CHIPN_INTEL_28F640K18 "28F640K18"
+#define CFI_CHIP_INTEL_28F128K18 0x8806
+#define CFI_CHIPN_INTEL_28F128K18 "28F128K18"
+#define CFI_CHIP_INTEL_28F256K18 0x8807
+#define CFI_CHIPN_INTEL_28F256K18 "28F256K18"
+
+#endif /* FLASH_INTEL_H */
diff --git a/board/scb9328/memsetup.S b/board/scb9328/memsetup.S
new file mode 100644
index 00000000000..be5650a45f7
--- /dev/null
+++ b/board/scb9328/memsetup.S
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ * 02111-1307, USA.
+ *
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/imx-regs.h>
+
+.globl memsetup
+memsetup:
+
+ mov r10, lr
+
+/* Change PERCLK1DIV to 14 ie 14+1 */
+ ldr r0, =PCDR
+ ldr r1, =CFG_PCDR_VAL
+ str r1, [r0]
+
+/* set MCU PLL Control Register 0 */
+
+ ldr r0, =MPCTL0
+ ldr r1, =CFG_MPCTL0_VAL
+ str r1, [r0]
+
+/* set mpll restart bit */
+ ldr r0, =CSCR
+ ldr r1, [r0]
+ orr r1,r1,#(1<<21)
+ str r1, [r0]
+
+ mov r2,#0x10
+1:
+ mov r3,#0x2000
+2:
+ subs r3,r3,#1
+ bne 2b
+
+ subs r2,r2,#1
+ bne 1b
+
+/* set System PLL Control Register 0 */
+
+ ldr r0, =SPCTL0
+ ldr r1, =CFG_SPCTL0_VAL
+ str r1, [r0]
+
+/* set spll restart bit */
+ ldr r0, =CSCR
+ ldr r1, [r0]
+ orr r1,r1,#(1<<22)
+ str r1, [r0]
+
+ mov r2,#0x10
+1:
+ mov r3,#0x2000
+2:
+ subs r3,r3,#1
+ bne 2b
+
+ subs r2,r2,#1
+ bne 1b
+
+ ldr r0, =CSCR
+ ldr r1, =CFG_CSCR_VAL
+ str r1, [r0]
+
+/* I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
+ *this.....
+ *
+ * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
+ * register 1, this stops it using the output of the PLL and thus runs at the
+ * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
+ * use the value set in the CM_OSC registers...regardless of what you set it
+ * too! Thus, although i thought i was running at 140MHz, i'm actually running
+ * at 40!..
+
+ * Slapping this into my bootloader does the trick...
+
+ * MRC p15,0,r0,c1,c0,0 ; read core configuration register
+ * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode
+ * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration
+ * register
+ */
+ MRC p15,0,r0,c1,c0,0
+ ORR r0,r0,#0xC0000000
+ MCR p15,0,r0,c1,c0,0
+
+ ldr r0, =GPR(0)
+ ldr r1, =CFG_GPR_A_VAL
+ str r1, [r0]
+
+ ldr r0, =GIUS(0)
+ ldr r1, =CFG_GIUS_A_VAL
+ str r1, [r0]
+
+/* CS3 becomes CS3 by clearing reset default bit 1 in FMCR */
+
+ ldr r0, =FMCR
+ ldr r1, =CFG_FMCR_VAL
+ str r1, [r0]
+
+ ldr r0, =CS0U
+ ldr r1, =CFG_CS0U_VAL
+ str r1, [r0]
+
+ ldr r0, =CS0L
+ ldr r1, =CFG_CS0L_VAL
+ str r1, [r0]
+
+ ldr r0, =CS1U
+ ldr r1, =CFG_CS1U_VAL
+ str r1, [r0]
+
+ ldr r0, =CS1L
+ ldr r1, =CFG_CS1L_VAL
+ str r1, [r0]
+
+ ldr r0, =CS2U
+ ldr r1, =CFG_CS2U_VAL
+ str r1, [r0]
+
+ ldr r0, =CS2L
+ ldr r1, =CFG_CS2L_VAL
+ str r1, [r0]
+
+ ldr r0, =CS3U
+ ldr r1, =CFG_CS3U_VAL
+ str r1, [r0]
+
+ ldr r0, =CS3L
+ ldr r1, =CFG_CS3L_VAL
+ str r1, [r0]
+
+ ldr r0, =CS4U
+ ldr r1, =CFG_CS4U_VAL
+ str r1, [r0]
+
+ ldr r0, =CS4L
+ ldr r1, =CFG_CS4L_VAL
+ str r1, [r0]
+
+ ldr r0, =CS5U
+ ldr r1, =CFG_CS5U_VAL
+ str r1, [r0]
+
+ ldr r0, =CS5L
+ ldr r1, =CFG_CS5L_VAL
+ str r1, [r0]
+
+/* SDRAM Setup */
+
+ ldr r0, =SDCTL0
+ ldr r1, =PRECHARGE_CMD
+ str r1, [r0]
+
+ ldr r0, =0x08200000
+ ldr r1, =0x0 /* Issue Precharge all Command */
+ str r1, [r0]
+
+ ldr r0, =SDCTL0
+ ldr r1, =AUTOREFRESH_CMD
+ str r1, [r0]
+
+ ldr r0, =0x08000000
+ ldr r1, =0x0 /* Issue AutoRefresh Command */
+ str r1, [r0]
+ str r1, [r0]
+ str r1, [r0]
+ str r1, [r0]
+ str r1, [r0]
+ str r1, [r0]
+ str r1, [r0]
+ str r1, [r0]
+
+ ldr r0, =SDCTL0
+ ldr r1, =0xb10a8300
+ str r1, [r0]
+
+ ldr r0, =0x08223000 /* CAS Latency 2 */
+ ldr r1, =0x0 /* Issue Mode Register Command, Burst Length = 8 */
+ str r1, [r0]
+
+ ldr r0, =SDCTL0
+ ldr r1, =0x810a8200 /* Set to Normal Mode CAS 2 */
+ str r1, [r0]
+
+ mov pc,r10
diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c
new file mode 100644
index 00000000000..a1fe0aefeb3
--- /dev/null
+++ b/board/scb9328/scb9328.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+int board_init( void ){
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_arch_number = 508;
+ gd->bd->bi_boot_params = 0x08000100;
+
+ return 0;
+}
+
+int dram_init( void ){
+ DECLARE_GLOBAL_DATA_PTR;
+
+#if ( CONFIG_NR_DRAM_BANKS > 0 )
+ gd->bd->bi_dram[0].start = SCB9328_SDRAM_1;
+ gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE;
+#endif
+#if ( CONFIG_NR_DRAM_BANKS > 1 )
+ gd->bd->bi_dram[1].start = SCB9328_SDRAM_2;
+ gd->bd->bi_dram[1].size = SCB9328_SDRAM_2_SIZE;
+#endif
+#if ( CONFIG_NR_DRAM_BANKS > 2 )
+ gd->bd->bi_dram[2].start = SCB9328_SDRAM_3;
+ gd->bd->bi_dram[2].size = SCB9328_SDRAM_3_SIZE;
+#endif
+#if ( CONFIG_NR_DRAM_BANKS > 3 )
+ gd->bd->bi_dram[3].start = SCB9328_SDRAM_4;
+ gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE;
+#endif
+
+ return 0;
+}
+
+/**
+ * show_boot_progress: - indicate state of the boot process
+ *
+ * @param status: Status number - see README for details.
+ *
+ * The CSB226 does only have 3 LEDs, so we switch them on at the most
+ * important states (1, 5, 15).
+ */
+
+void show_boot_progress (int status)
+{
+ return;
+}
diff --git a/board/scb9328/u-boot.lds b/board/scb9328/u-boot.lds
new file mode 100644
index 00000000000..5076303c7ef
--- /dev/null
+++ b/board/scb9328/u-boot.lds
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm920t/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c
index 4ec7b96c49d..1a35187260a 100644
--- a/board/total5200/total5200.c
+++ b/board/total5200/total5200.c
@@ -265,7 +265,7 @@ static const S1D_REGS init_regs [] =
void video_get_info_str (int line_number, char *info)
{
if (line_number == 1) {
-#if CONFIG_MGT5100
+#ifdef CONFIG_MGT5100
strcpy (info, " Total5100");
#elif CONFIG_TOTAL5200_REV==1
strcpy (info, " Total5200");
diff --git a/common/Makefile b/common/Makefile
index 4a36673b449..943da5e4752 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -45,7 +45,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o \
env_nand.o env_dataflash.o env_flash.o env_eeprom.o env_nvram.o env_nowhere.o exports.o \
flash.o fpga.o \
hush.o kgdb.o lists.o lynxkdi.o memsize.o miiphybb.o miiphyutil.o \
- s_record.o soft_i2c.o soft_spi.o spartan2.o \
+ s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o \
usb.o usb_kbd.o usb_storage.o \
virtex2.o xilinx.o circbuf.o
diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c
index c1d4c0b90a6..3a971334bb0 100644
--- a/common/cmd_bmp.c
+++ b/common/cmd_bmp.c
@@ -123,14 +123,15 @@ static int bmp_info(ulong addr)
*/
static int bmp_display(ulong addr, int x, int y)
{
-#ifdef CONFIG_LCD
- extern int lcd_display_bitmap (ulong, int, int);
+#if defined(CONFIG_LCD)
+ extern int lcd_display_bitmap (ulong, int, int);
return (lcd_display_bitmap (addr, x, y));
-#endif
-#ifdef CONFIG_VIDEO
+#elif defined(CONFIG_VIDEO)
extern int video_display_bitmap (ulong, int, int);
return (video_display_bitmap (addr, x, y));
+#else
+# error bmp_display() requires CONFIG_LCD or CONFIG_VIDEO
#endif
}
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index aaf6de902b5..3510561428a 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -43,6 +43,7 @@
#include <command.h>
#include <environment.h>
#include <watchdog.h>
+#include <serial.h>
#include <linux/stddef.h>
#include <asm/byteorder.h>
#if (CONFIG_COMMANDS & CFG_CMD_NET)
@@ -216,6 +217,11 @@ int _do_setenv (int flag, int argc, char *argv[])
/* Try assigning specified device */
if (console_assign (console, argv[2]) < 0)
return 1;
+
+#ifdef CONFIG_SERIAL_MULTI
+ if (serial_assign (argv[2]) < 0)
+ return 1;
+#endif
}
/*
diff --git a/common/devices.c b/common/devices.c
index 7c859521a3b..b37c99a69b2 100644
--- a/common/devices.c
+++ b/common/devices.c
@@ -26,6 +26,7 @@
#include <stdarg.h>
#include <malloc.h>
#include <devices.h>
+#include <serial.h>
#ifdef CONFIG_LOGBUFFER
#include <logbuff.h>
#endif
@@ -194,6 +195,9 @@ int devices_init (void)
drv_logbuff_init ();
#endif
drv_system_init ();
+#ifdef CONFIG_SERIAL_MULTI
+ serial_devices_init ();
+#endif
#ifdef CONFIG_USB_TTY
drv_usbtty_init ();
#endif
diff --git a/common/serial.c b/common/serial.c
new file mode 100644
index 00000000000..f89bb0a7a2c
--- /dev/null
+++ b/common/serial.c
@@ -0,0 +1,196 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <serial.h>
+#include <devices.h>
+
+#if defined(CONFIG_SERIAL_MULTI)
+
+static struct serial_device *serial_devices = NULL;
+static struct serial_device *serial_current = NULL;
+
+#ifndef CONFIG_LWMON
+struct serial_device * default_serial_console (void)
+{
+#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
+ return &serial_smc_device;
+#elif defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) \
+ || defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
+ return &serial_scc_device;
+#else
+#error No default console
+#endif
+}
+#endif
+
+static int serial_register(struct serial_device* dev)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ dev->init += gd->reloc_off;
+ dev->setbrg += gd->reloc_off;
+ dev->getc += gd->reloc_off;
+ dev->tstc += gd->reloc_off;
+ dev->putc += gd->reloc_off;
+ dev->puts += gd->reloc_off;
+
+ dev->next = serial_devices;
+ serial_devices = dev;
+
+ return 0;
+}
+
+void serial_initialize(void)
+{
+#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2)
+ serial_register(&serial_smc_device);
+#endif
+#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) \
+ || defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
+ serial_register(&serial_scc_device);
+#endif
+
+ serial_assign(default_serial_console()->name);
+}
+
+void serial_devices_init(void)
+{
+ device_t dev;
+ struct serial_device *s = serial_devices;
+
+ while (s)
+ {
+ memset (&dev, 0, sizeof (dev));
+
+ strcpy (dev.name, s->name);
+ dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT;
+
+ dev.start = s->init;
+ dev.putc = s->putc;
+ dev.puts = s->puts;
+ dev.getc = s->getc;
+ dev.tstc = s->tstc;
+
+ device_register (&dev);
+
+ s = s->next;
+ }
+}
+
+int serial_assign(char * name)
+{
+ struct serial_device *s;
+
+ for (s = serial_devices; s; s = s->next)
+ {
+ if (strcmp(s->name, name) == 0)
+ {
+ serial_current = s;
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+void serial_reinit_all(void)
+{
+ struct serial_device *s;
+
+ for (s = serial_devices; s; s = s->next)
+ {
+ s->init();
+ }
+}
+
+int serial_init(void)
+{
+ if (!serial_current)
+ {
+ struct serial_device *dev = default_serial_console();
+ return dev->init();
+ }
+
+ return serial_current->init();
+}
+
+void serial_setbrg(void)
+{
+ if (!serial_current)
+ {
+ struct serial_device *dev = default_serial_console();
+ dev->setbrg();
+ return;
+ }
+
+ serial_current->setbrg();
+}
+
+int serial_getc(void)
+{
+ if (!serial_current)
+ {
+ struct serial_device *dev = default_serial_console();
+ return dev->getc();
+ }
+
+ return serial_current->getc();
+}
+
+int serial_tstc(void)
+{
+ if (!serial_current)
+ {
+ struct serial_device *dev = default_serial_console();
+ return dev->tstc();
+ }
+
+ return serial_current->tstc();
+}
+
+void serial_putc(const char c)
+{
+ if (!serial_current)
+ {
+ struct serial_device *dev = default_serial_console();
+ dev->putc(c);
+ return;
+ }
+
+ serial_current->putc(c);
+}
+
+void serial_puts(const char *s)
+{
+ if (!serial_current)
+ {
+ struct serial_device *dev = default_serial_console();
+ dev->puts(s);
+ return;
+ }
+
+ serial_current->puts(s);
+}
+
+#endif /* CONFIG_SERIAL_MULTI */
diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c
index 58eab4e550e..ef3fbf35d18 100644
--- a/cpu/arm720t/cpu.c
+++ b/cpu/arm720t/cpu.c
@@ -41,8 +41,6 @@ int cpu_init (void)
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
diff --git a/cpu/arm920t/Makefile b/cpu/arm920t/Makefile
index 605adf301f0..68a33d65594 100644
--- a/cpu/arm920t/Makefile
+++ b/cpu/arm920t/Makefile
@@ -26,7 +26,11 @@ include $(TOPDIR)/config.mk
LIB = lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o speed.o usb_ohci.o
+OBJS = cpu.o \
+ imx_generic.o imx_interrupts.o imx_speed.o \
+ interrupts.o \
+ s3c24x0_interrupts.o s3c24x0_serial.o s3c24x0_speed.o \
+ usb_ohci.o
all: .depend $(START) $(LIB)
diff --git a/cpu/arm920t/imx_generic.c b/cpu/arm920t/imx_generic.c
new file mode 100644
index 00000000000..aa7c8c159dc
--- /dev/null
+++ b/cpu/arm920t/imx_generic.c
@@ -0,0 +1,90 @@
+/*
+ * arch/arm/mach-imx/generic.c
+ *
+ * author: Sascha Hauer
+ * Created: april 20th, 2004
+ * Copyright: Synertronixx GmbH
+ *
+ * Common code for i.MX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_IMX
+
+#include <asm/arch/imx-regs.h>
+
+void imx_gpio_mode(int gpio_mode)
+{
+ unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+ unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> 5;
+ unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> 10;
+ unsigned int tmp;
+
+ /* Pullup enable */
+ if(gpio_mode & GPIO_PUEN)
+ PUEN(port) |= (1<<pin);
+ else
+ PUEN(port) &= ~(1<<pin);
+
+ /* Data direction */
+ if(gpio_mode & GPIO_OUT)
+ DDIR(port) |= 1<<pin;
+ else
+ DDIR(port) &= ~(1<<pin);
+
+ /* Primary / alternate function */
+ if(gpio_mode & GPIO_AF)
+ GPR(port) |= (1<<pin);
+ else
+ GPR(port) &= ~(1<<pin);
+
+ /* use as gpio? */
+ if( ocr == 3 )
+ GIUS(port) |= (1<<pin);
+ else
+ GIUS(port) &= ~(1<<pin);
+
+ /* Output / input configuration */
+ /* FIXME: I'm not very sure about OCR and ICONF, someone
+ * should have a look over it
+ */
+ if(pin<16) {
+ tmp = OCR1(port);
+ tmp &= ~( 3<<(pin*2));
+ tmp |= (ocr << (pin*2));
+ OCR1(port) = tmp;
+
+ if( gpio_mode & GPIO_AOUT )
+ ICONFA1(port) &= ~( 3<<(pin*2));
+ if( gpio_mode & GPIO_BOUT )
+ ICONFB1(port) &= ~( 3<<(pin*2));
+ } else {
+ tmp = OCR2(port);
+ tmp &= ~( 3<<((pin-16)*2));
+ tmp |= (ocr << ((pin-16)*2));
+ OCR2(port) = tmp;
+
+ if( gpio_mode & GPIO_AOUT )
+ ICONFA2(port) &= ~( 3<<((pin-16)*2));
+ if( gpio_mode & GPIO_BOUT )
+ ICONFB2(port) &= ~( 3<<((pin-16)*2));
+ }
+}
+
+#endif /* CONFIG_IMX */
diff --git a/cpu/arm920t/imx_interrupts.c b/cpu/arm920t/imx_interrupts.c
new file mode 100644
index 00000000000..12ae2faf28d
--- /dev/null
+++ b/cpu/arm920t/imx_interrupts.c
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined (CONFIG_IMX)
+
+#include <arm920t.h>
+#include <asm/arch/imx-regs.h>
+
+int interrupt_init (void)
+{
+ int i;
+ /* setup GP Timer 1 */
+ TCTL1 = TCTL_SWR;
+ for ( i=0; i<100; i++) TCTL1 = 0; /* We have no udelay by now */
+ TPRER1 = get_PERCLK1() / 1000000; /* 1 MHz */
+ TCTL1 |= TCTL_FRR | (1<<1); /* Freerun Mode, PERCLK1 input */
+
+ reset_timer_masked();
+
+ return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+ reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+ return get_timer_masked ();
+}
+
+void set_timer (ulong t)
+{
+ /* nop */
+}
+
+void reset_timer_masked (void)
+{
+ TCTL1 &= ~TCTL_TEN;
+ TCTL1 |= TCTL_TEN; /* Enable timer */
+}
+
+ulong get_timer_masked (void)
+{
+ return TCN1;
+}
+
+void udelay_masked (unsigned long usec)
+{
+ ulong start = get_timer_masked();
+
+ while (get_timer_masked () - start < usec )
+ /*NOP*/;
+}
+
+void udelay (unsigned long usec)
+{
+ udelay_masked(usec);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+ ulong tbclk;
+
+ tbclk = CFG_HZ;
+
+ return tbclk;
+}
+
+#endif /* defined (CONFIG_IMX) */
diff --git a/cpu/arm920t/imx_speed.c b/cpu/arm920t/imx_speed.c
new file mode 100644
index 00000000000..1e296987d6a
--- /dev/null
+++ b/cpu/arm920t/imx_speed.c
@@ -0,0 +1,102 @@
+/*
+ *
+ * (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#if defined (CONFIG_IMX)
+
+#include <asm/arch/imx-regs.h>
+
+/* ------------------------------------------------------------------------- */
+/* NOTE: This describes the proper use of this file.
+ *
+ * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
+ * SH FIXME: 16780000 in our case
+ * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
+ * the specified bus in HZ.
+ */
+/* ------------------------------------------------------------------------- */
+
+ulong get_systemPLLCLK(void)
+{
+ /* FIXME: We assume System_SEL = 0 here */
+ u32 spctl0 = SPCTL0;
+ u32 mfi = (spctl0 >> 10) & 0xf;
+ u32 mfn = spctl0 & 0x3f;
+ u32 mfd = (spctl0 >> 16) & 0x3f;
+ u32 pd = (spctl0 >> 26) & 0xf;
+
+ mfi = mfi<=5 ? 5 : mfi;
+
+ return (2*(CONFIG_SYSPLL_CLK_FREQ>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
+}
+
+ulong get_mcuPLLCLK(void)
+{
+ /* FIXME: We assume System_SEL = 0 here */
+ u32 mpctl0 = MPCTL0;
+ u32 mfi = (mpctl0 >> 10) & 0xf;
+ u32 mfn = mpctl0 & 0x3f;
+ u32 mfd = (mpctl0 >> 16) & 0x3f;
+ u32 pd = (mpctl0 >> 26) & 0xf;
+
+ mfi = mfi<=5 ? 5 : mfi;
+
+ return (2*(CONFIG_SYS_CLK_FREQ>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
+}
+
+ulong get_FCLK(void)
+{
+ return (( CSCR>>15)&1) ? get_mcuPLLCLK()>>1 : get_mcuPLLCLK();
+}
+
+/* return HCLK frequency */
+ulong get_HCLK(void)
+{
+ u32 bclkdiv = (( CSCR >> 10 ) & 0xf) + 1;
+ printf("bclkdiv: %d\n", bclkdiv);
+ return get_systemPLLCLK() / bclkdiv;
+}
+
+/* return BCLK frequency */
+ulong get_BCLK(void)
+{
+ return get_HCLK();
+}
+
+ulong get_PERCLK1(void)
+{
+ return get_systemPLLCLK() / (((PCDR) & 0xf)+1);
+}
+
+ulong get_PERCLK2(void)
+{
+ return get_systemPLLCLK() / (((PCDR>>4) & 0xf)+1);
+}
+
+ulong get_PERCLK3(void)
+{
+ return get_systemPLLCLK() / (((PCDR>>16) & 0x7f)+1);
+}
+
+#endif /* defined (CONFIG_IMX) */
diff --git a/cpu/arm920t/interrupts.c b/cpu/arm920t/interrupts.c
index 521c4f479df..ea58f154d40 100644
--- a/cpu/arm920t/interrupts.c
+++ b/cpu/arm920t/interrupts.c
@@ -30,25 +30,11 @@
*/
#include <common.h>
-#include <arm920t.h>
-#if defined(CONFIG_S3C2400)
-#include <s3c2400.h>
-#elif defined(CONFIG_S3C2410)
-#include <s3c2410.h>
-#endif
+#include <arm920t.h>
#include <asm/proc-armv/ptrace.h>
extern void reset_cpu(ulong addr);
-int timer_load_val = 0;
-
-/* macro to read the 16 bit timer */
-static inline ulong READ_TIMER(void)
-{
- S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
-
- return (timers->TCNTO4 & 0xffff);
-}
#ifdef CONFIG_USE_IRQ
/* enable IRQ interrupts */
@@ -182,130 +168,3 @@ void do_irq (struct pt_regs *pt_regs)
show_regs (pt_regs);
bad_mode ();
}
-
-static ulong timestamp;
-static ulong lastdec;
-
-int interrupt_init (void)
-{
- S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
-
- /* use PWM Timer 4 because it has no output */
- /* prescaler for Timer 4 is 16 */
- timers->TCFG0 = 0x0f00;
- if (timer_load_val == 0)
- {
- /*
- * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
- * (default) and prescaler = 16. Should be 10390
- * @33.25MHz and 15625 @ 50 MHz
- */
- timer_load_val = get_PCLK()/(2 * 16 * 100);
- }
- /* load value for 10 ms timeout */
- lastdec = timers->TCNTB4 = timer_load_val;
- /* auto load, manual update of Timer 4 */
- timers->TCON = (timers->TCON & ~0x0700000) | 0x600000;
- /* auto load, start Timer 4 */
- timers->TCON = (timers->TCON & ~0x0700000) | 0x500000;
- timestamp = 0;
-
- return (0);
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer (void)
-{
- reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
- return get_timer_masked () - base;
-}
-
-void set_timer (ulong t)
-{
- timestamp = t;
-}
-
-void udelay (unsigned long usec)
-{
- ulong tmo;
- ulong start = get_timer(0);
-
- tmo = usec / 1000;
- tmo *= (timer_load_val * 100);
- tmo /= 1000;
-
- while ((ulong)(get_timer_masked () - start) < tmo)
- /*NOP*/;
-}
-
-void reset_timer_masked (void)
-{
- /* reset time */
- lastdec = READ_TIMER();
- timestamp = 0;
-}
-
-ulong get_timer_masked (void)
-{
- ulong now = READ_TIMER();
-
- if (lastdec >= now) {
- /* normal mode */
- timestamp += lastdec - now;
- } else {
- /* we have an overflow ... */
- timestamp += lastdec + timer_load_val - now;
- }
- lastdec = now;
-
- return timestamp;
-}
-
-void udelay_masked (unsigned long usec)
-{
- ulong tmo;
-
- tmo = usec / 1000;
- tmo *= (timer_load_val * 100);
- tmo /= 1000;
-
- reset_timer_masked ();
-
- while (get_timer_masked () < tmo)
- /*NOP*/;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
- ulong tbclk;
-
-#if defined(CONFIG_SMDK2400) || defined(CONFIG_TRAB)
- tbclk = timer_load_val * 100;
-#elif defined(CONFIG_SMDK2410) || defined(CONFIG_VCMA9)
- tbclk = CFG_HZ;
-#else
-# error "tbclk not configured"
-#endif
-
- return tbclk;
-}
diff --git a/cpu/arm920t/s3c24x0_interrupts.c b/cpu/arm920t/s3c24x0_interrupts.c
new file mode 100644
index 00000000000..92298b09f02
--- /dev/null
+++ b/cpu/arm920t/s3c24x0_interrupts.c
@@ -0,0 +1,180 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
+
+#include <arm920t.h>
+#if defined(CONFIG_S3C2400)
+#include <s3c2400.h>
+#elif defined(CONFIG_S3C2410)
+#include <s3c2410.h>
+#endif
+
+extern void reset_cpu(ulong addr);
+int timer_load_val = 0;
+
+/* macro to read the 16 bit timer */
+static inline ulong READ_TIMER(void)
+{
+ S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
+
+ return (timers->TCNTO4 & 0xffff);
+}
+
+static ulong timestamp;
+static ulong lastdec;
+
+int interrupt_init (void)
+{
+ S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
+
+ /* use PWM Timer 4 because it has no output */
+ /* prescaler for Timer 4 is 16 */
+ timers->TCFG0 = 0x0f00;
+ if (timer_load_val == 0)
+ {
+ /*
+ * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
+ * (default) and prescaler = 16. Should be 10390
+ * @33.25MHz and 15625 @ 50 MHz
+ */
+ timer_load_val = get_PCLK()/(2 * 16 * 100);
+ }
+ /* load value for 10 ms timeout */
+ lastdec = timers->TCNTB4 = timer_load_val;
+ /* auto load, manual update of Timer 4 */
+ timers->TCON = (timers->TCON & ~0x0700000) | 0x600000;
+ /* auto load, start Timer 4 */
+ timers->TCON = (timers->TCON & ~0x0700000) | 0x500000;
+ timestamp = 0;
+
+ return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+ reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+ return get_timer_masked () - base;
+}
+
+void set_timer (ulong t)
+{
+ timestamp = t;
+}
+
+void udelay (unsigned long usec)
+{
+ ulong tmo;
+ ulong start = get_timer(0);
+
+ tmo = usec / 1000;
+ tmo *= (timer_load_val * 100);
+ tmo /= 1000;
+
+ while ((ulong)(get_timer_masked () - start) < tmo)
+ /*NOP*/;
+}
+
+void reset_timer_masked (void)
+{
+ /* reset time */
+ lastdec = READ_TIMER();
+ timestamp = 0;
+}
+
+ulong get_timer_masked (void)
+{
+ ulong now = READ_TIMER();
+
+ if (lastdec >= now) {
+ /* normal mode */
+ timestamp += lastdec - now;
+ } else {
+ /* we have an overflow ... */
+ timestamp += lastdec + timer_load_val - now;
+ }
+ lastdec = now;
+
+ return timestamp;
+}
+
+void udelay_masked (unsigned long usec)
+{
+ ulong tmo;
+
+ tmo = usec / 1000;
+ tmo *= (timer_load_val * 100);
+ tmo /= 1000;
+
+ reset_timer_masked ();
+
+ while (get_timer_masked () < tmo)
+ /*NOP*/;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+ ulong tbclk;
+
+#if defined(CONFIG_SMDK2400) || defined(CONFIG_TRAB)
+ tbclk = timer_load_val * 100;
+#elif defined(CONFIG_SMDK2410) || defined(CONFIG_VCMA9)
+ tbclk = CFG_HZ;
+#else
+# error "tbclk not configured"
+#endif
+
+ return tbclk;
+}
+
+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
diff --git a/cpu/arm920t/serial.c b/cpu/arm920t/s3c24x0_serial.c
index 1749e820a12..83274432e4b 100644
--- a/cpu/arm920t/serial.c
+++ b/cpu/arm920t/s3c24x0_serial.c
@@ -1,24 +1,26 @@
- /*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <common.h>
+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
+
#if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB)
#include <s3c2400.h>
#elif defined(CONFIG_S3C2410)
@@ -176,3 +178,5 @@ serial_puts (const char *s)
serial_putc (*s++);
}
}
+
+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
diff --git a/cpu/arm920t/speed.c b/cpu/arm920t/s3c24x0_speed.c
index 1f435436b0d..e0dca625635 100644
--- a/cpu/arm920t/speed.c
+++ b/cpu/arm920t/s3c24x0_speed.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2001-2002
+ * (C) Copyright 2001-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2002
@@ -30,6 +30,8 @@
*/
#include <common.h>
+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
+
#if defined(CONFIG_S3C2400)
#include <s3c2400.h>
#elif defined(CONFIG_S3C2410)
@@ -95,3 +97,5 @@ ulong get_UCLK(void)
{
return(get_PLLCLK(UPLL));
}
+
+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 0e372d0e4ce..78c470d7b69 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -118,20 +118,17 @@ reset:
/* turn off the watchdog */
#if defined(CONFIG_S3C2400)
-#define pWTCON 0x15300000
-/* Interupt-Controller base addresses */
-#define INTMSK 0x14400008
-/* clock divisor register */
-#define CLKDIVN 0x14800014
+# define pWTCON 0x15300000
+# define INTMSK 0x14400008 /* Interupt-Controller base addresses */
+# define CLKDIVN 0x14800014 /* clock divisor register */
#elif defined(CONFIG_S3C2410)
-#define pWTCON 0x53000000
-/* Interupt-Controller base addresses */
-#define INTMSK 0x4A000008
-#define INTSUBMSK 0x4A00001C
-/* clock divisor register */
-#define CLKDIVN 0x4C000014
+# define pWTCON 0x53000000
+# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */
+# define INTSUBMSK 0x4A00001C
+# define CLKDIVN 0x4C000014 /* clock divisor register */
#endif
+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
ldr r0, =pWTCON
mov r1, #0x0
str r1, [r0]
@@ -142,17 +139,18 @@ reset:
mov r1, #0xffffffff
ldr r0, =INTMSK
str r1, [r0]
-#if defined(CONFIG_S3C2410)
+# if defined(CONFIG_S3C2410)
ldr r1, =0x3ff
ldr r0, =INTSUBMSK
str r1, [r0]
-#endif
+# endif
/* FCLK:HCLK:PCLK = 1:2:4 */
/* default FCLK is 120 MHz ! */
ldr r0, =CLKDIVN
mov r1, #3
str r1, [r0]
+#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 */
/*
* we do sys-critical inits only at reboot,
diff --git a/cpu/mc9328/cpu.c b/cpu/mc9328/cpu.c
deleted file mode 100644
index 2a2b5780171..00000000000
--- a/cpu/mc9328/cpu.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- */
-
-#include <common.h>
-#include <command.h>
-#include <arm920t.h>
-
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1 (void)
-{
- unsigned long value;
-
- __asm__ __volatile__(
- "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
- : "=r" (value)
- :
- : "memory");
-
-#ifdef MMU_DEBUG
- printf ("p15/c1 is = %08lx\n", value);
-#endif
- return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1 (unsigned long value)
-{
-#ifdef MMU_DEBUG
- printf ("write %08lx to p15/c1\n", value);
-#endif
- __asm__ __volatile__(
- "mcr p15, 0, %0, c1, c0, 0 @ write it back\n"
- :
- : "r" (value)
- : "memory");
-
- read_p15_c1 ();
-}
-
-static void cp_delay (void)
-{
- volatile int i;
-
- /* copro seems to need some delay between reading and writing */
- for (i = 0; i < 100; i++);
-}
-
-/* See also ARM Ref. Man. */
-#define C1_MMU (1<<0) /* mmu off/on */
-#define C1_ALIGN (1<<1) /* alignment faults off/on */
-#define C1_DC (1<<2) /* dcache off/on */
-#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
-#define C1_SYS_PROT (1<<8) /* system protection */
-#define C1_ROM_PROT (1<<9) /* ROM protection */
-#define C1_IC (1<<12) /* icache off/on */
-#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
-#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */
-
-int cpu_init (void)
-{
- /*
- * setup up stacks if necessary
- */
-#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
- IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
- FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
-#endif
- return 0;
-}
-
-int cleanup_before_linux (void)
-{
- /*
- * this function is called just before we call linux
- * it prepares the processor for linux
- *
- * we turn off caches etc ...
- */
-
- unsigned long i;
-
- disable_interrupts ();
-
- /* turn off I/D-cache */
- asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
- i &= ~(C1_DC | C1_IC);
- asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-
- /* flush I/D-cache */
- i = 0;
- asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
- return (0);
-}
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- extern void reset_cpu (ulong addr);
-
- disable_interrupts ();
- reset_cpu (0);
- /*NOTREACHED*/
- return (0);
-}
-
-void icache_enable (void)
-{
- ulong reg;
-
- reg = read_p15_c1 ();
- cp_delay ();
- write_p15_c1 (reg | C1_IC);
-}
-
-void icache_disable (void)
-{
- ulong reg;
-
- reg = read_p15_c1 ();
- cp_delay ();
- write_p15_c1 (reg & ~C1_IC);
-}
-
-int icache_status (void)
-{
- return (read_p15_c1 () & C1_IC) != 0;
-}
-
-#ifdef USE_920T_MMU
-/* It makes no sense to use the dcache if the MMU is not enabled */
-void dcache_enable (void)
-{
- ulong reg;
-
- reg = read_p15_c1 ();
- cp_delay ();
- write_p15_c1 (reg | C1_DC);
-}
-
-void dcache_disable (void)
-{
- ulong reg;
-
- reg = read_p15_c1 ();
- cp_delay ();
- reg &= ~C1_DC;
- write_p15_c1 (reg);
-}
-
-int dcache_status (void)
-{
- return (read_p15_c1 () & C1_DC) != 0;
-}
-#endif
diff --git a/cpu/mc9328/interrupts.c b/cpu/mc9328/interrupts.c
deleted file mode 100644
index 2407db609fe..00000000000
--- a/cpu/mc9328/interrupts.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <arm920t.h>
-#include <mc9328.h>
-
-#include <asm/proc-armv/ptrace.h>
-
-extern void reset_cpu(ulong addr);
-int timer_load_val = 0;
-
-#ifdef CONFIG_USE_IRQ
-/* enable IRQ interrupts */
-void enable_interrupts (void)
-{
- unsigned long temp;
- __asm__ __volatile__("mrs %0, cpsr\n"
- "bic %0, %0, #0x80\n"
- "msr cpsr_c, %0"
- : "=r" (temp)
- :
- : "memory");
-}
-
-
-/*
- * disable IRQ/FIQ interrupts
- * returns true if interrupts had been enabled before we disabled them
- */
-int disable_interrupts (void)
-{
- unsigned long old,temp;
- __asm__ __volatile__("mrs %0, cpsr\n"
- "orr %1, %0, #0xc0\n"
- "msr cpsr_c, %1"
- : "=r" (old), "=r" (temp)
- :
- : "memory");
- return (old & 0x80) == 0;
-}
-#else
-void enable_interrupts (void)
-{
- return;
-}
-int disable_interrupts (void)
-{
- return 0;
-}
-#endif
-
-
-void bad_mode (void)
-{
- panic ("Resetting CPU ...\n");
- reset_cpu (0);
-}
-
-void show_regs (struct pt_regs *regs)
-{
- unsigned long flags;
- const char *processor_modes[] = {
- "USER_26", "FIQ_26", "IRQ_26", "SVC_26",
- "UK4_26", "UK5_26", "UK6_26", "UK7_26",
- "UK8_26", "UK9_26", "UK10_26", "UK11_26",
- "UK12_26", "UK13_26", "UK14_26", "UK15_26",
- "USER_32", "FIQ_32", "IRQ_32", "SVC_32",
- "UK4_32", "UK5_32", "UK6_32", "ABT_32",
- "UK8_32", "UK9_32", "UK10_32", "UND_32",
- "UK12_32", "UK13_32", "UK14_32", "SYS_32",
- };
-
- flags = condition_codes (regs);
-
- printf ("pc : [<%08lx>] lr : [<%08lx>]\n"
- "sp : %08lx ip : %08lx fp : %08lx\n",
- instruction_pointer (regs),
- regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
- printf ("r10: %08lx r9 : %08lx r8 : %08lx\n",
- regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
- printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
- regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
- printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
- regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
- printf ("Flags: %c%c%c%c",
- flags & CC_N_BIT ? 'N' : 'n',
- flags & CC_Z_BIT ? 'Z' : 'z',
- flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
- printf (" IRQs %s FIQs %s Mode %s%s\n",
- interrupts_enabled (regs) ? "on" : "off",
- fast_interrupts_enabled (regs) ? "on" : "off",
- processor_modes[processor_mode (regs)],
- thumb_mode (regs) ? " (T)" : "");
-}
-
-void do_undefined_instruction (struct pt_regs *pt_regs)
-{
- printf ("undefined instruction\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
-void do_software_interrupt (struct pt_regs *pt_regs)
-{
- printf ("software interrupt\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
-void do_prefetch_abort (struct pt_regs *pt_regs)
-{
- printf ("prefetch abort\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
-void do_data_abort (struct pt_regs *pt_regs)
-{
- printf ("data abort\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
-void do_not_used (struct pt_regs *pt_regs)
-{
- printf ("not used\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
-void do_fiq (struct pt_regs *pt_regs)
-{
- printf ("fast interrupt request\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
-void do_irq (struct pt_regs *pt_regs)
-{
- printf ("interrupt request\n");
- show_regs (pt_regs);
- bad_mode ();
-}
-
-
-int interrupt_init (void)
-{
-
-/* we don't use interrupt */
- return(0);
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer (void)
-{
- reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
- return get_timer_masked ();
-}
-
-void set_timer (ulong t)
-{
-/* Nop */
-}
-
-void udelay (unsigned long usec)
-{
- udelay_masked (usec);
-}
-
-void reset_timer_masked (void)
-{
- u32 tmp;
- MX1_TCTL1 = 0x09;
- tmp = 0x1f; /* a little delay for timer to reset */
- MX1_TPRER1 = 0x1f;
- MX1_TCTL1 = 0x19;
-}
-
-ulong get_timer_masked (void)
-{
- return MX1_TCN1;
-}
-
-void udelay_masked (unsigned long usec)
-{
- ulong tmo;
-
- tmo = usec / 1000;
- tmo *= CFG_HZ;
- tmo /= 1000;
-
- reset_timer_masked ();
-
- while (get_timer_masked () < tmo);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-
-ulong get_tbclk (void) {
- return CFG_HZ;
-}
diff --git a/cpu/mc9328/serial.c b/cpu/mc9328/serial.c
deleted file mode 100644
index 8dcfb80274c..00000000000
--- a/cpu/mc9328/serial.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * cpu/mc9328/serial.c
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mc9328.h>
-
-#if defined(CONFIG_UART1)
-/* GPIO PORT B */
-
-#define reg_GIUS MX1_GIUS_C
-#define reg_GPR MX1_GPR_B
-#define GPIO_MASK 0xFFFFE1FF
-#define UART_BASE 0x00206000
-
-#elif defined (CONFIG_UART2)
-/* GPIO PORT C */
-
-#define reg_GIUS MX1_GIUS_C
-#define reg_GPR MX1_GPR_C
-#define GPIO_MASK 0x0FFFFFFF
-#define UART_BASE 0x207000
-
-#endif
-
-#define reg_URXD (*((volatile u32 *)(UART_BASE+0x00)))
-#define reg_UTXD (*((volatile u32 *)(UART_BASE+0x40)))
-#define reg_UCR1 (*((volatile u32 *)(UART_BASE+0x80)))
-#define reg_UCR2 (*((volatile u32 *)(UART_BASE+0x84)))
-#define reg_UCR3 (*((volatile u32 *)(UART_BASE+0x88)))
-#define reg_UCR4 (*((volatile u32 *)(UART_BASE+0x8C)))
-#define reg_UFCR (*((volatile u32 *)(UART_BASE+0x90)))
-#define reg_USR1 (*((volatile u32 *)(UART_BASE+0x94)))
-#define reg_USR2 (*((volatile u32 *)(UART_BASE+0x98)))
-#define reg_UESC (*((volatile u32 *)(UART_BASE+0x9C)))
-#define reg_UTIM (*((volatile u32 *)(UART_BASE+0xA0)))
-#define reg_UBIR (*((volatile u32 *)(UART_BASE+0xA4)))
-#define reg_UBMR (*((volatile u32 *)(UART_BASE+0xA8)))
-#define reg_UBRC (*((volatile u32 *)(UART_BASE+0xAC)))
-
-#define TXFE_MASK 0x4000 /* Tx buffer empty */
-#define RDR_MASK 0x0001 /* receive data ready */
-
-void serial_setbrg (void) {
-
- /* config I/O pins for UART */
- reg_GIUS &= GPIO_MASK;
- reg_GPR &= GPIO_MASK;
-
- /* config UART */
- reg_UCR1 = 5;
- reg_UCR2 = 0x4027;
- reg_UCR4 = 1;
- reg_UFCR = 0xA81;
-
- reg_UBIR = 0xF;
- reg_UBMR = 0x8A;
- reg_UBRC = 8;
-}
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-
-int serial_init (void) {
- serial_setbrg ();
-
- return (0);
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-int serial_getc (void) {
-
- while (!(reg_USR2 & RDR_MASK)) ; /* wait until RDR bit set */
-
- return (u8)reg_URXD;
-}
-
-/*
- * Output a single byte to the serial port.
- */
-void serial_putc (const char c) {
-
- while (!(reg_USR2 & TXFE_MASK)); /* wait until TXFE bit set */
-
- reg_UTXD = (u16) c;
-
- if (c == '\n') { /* carriage return ? append line-feed */
- while (!(reg_USR2 & TXFE_MASK)); /* wait until TXFE bit set */
- reg_UTXD = '\r';
- }
-
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-int serial_tstc (void) {
- return reg_USR2 & RDR_MASK;
-}
-
-void serial_puts (const char *s) {
- while (*s) {
- serial_putc (*s++);
- }
-}
diff --git a/cpu/mc9328/start.S b/cpu/mc9328/start.S
deleted file mode 100644
index edfce121b7f..00000000000
--- a/cpu/mc9328/start.S
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- * armboot - Startup Code for ARM920 CPU-core
- *
- * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
- * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
- * Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/*
- *************************************************************************
- *
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start: b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-
- .balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * relocate armboot to ram
- * setup stack
- * jump to second stage
- *
- *************************************************************************
- */
-
-_TEXT_BASE:
- .word TEXT_BASE
-
-.globl _armboot_start
-_armboot_start:
- .word _start
-
-/*
- * These are defined in the board-specific linker script.
- */
-.globl _bss_start
-_bss_start:
- .word __bss_start
-
-.globl _bss_end
-_bss_end:
- .word _end
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-
-/*
- * the actual reset code
- */
-
-reset:
- /*
- * set the cpu to SVC32 mode
- */
- mrs r0,cpsr
- bic r0,r0,#0x1f
- orr r0,r0,#0xd3
- msr cpsr,r0
-
- /*
- * we do sys-critical inits only at reboot,
- * not when booting from ram!
- */
-#ifdef CONFIG_INIT_CRITICAL
- bl cpu_init_crit
-#endif
-
-relocate: /* relocate U-Boot to RAM */
- adr r0, _start /* r0 <- current position of code */
- ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
- cmp r0, r1 /* don't reloc during debug */
- beq stack_setup
-
- ldr r2, _armboot_start
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end addreee [r2] */
- ble copy_loop
-
- /* Set up the stack */
-stack_setup:
- ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
- sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
- sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
-#ifdef CONFIG_USE_IRQ
- sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
- sub sp, r0, #12 /* leave 3 words for abort-stack */
-
-clear_bss:
- ldr r0, _bss_start /* find start of bss segment */
- ldr r1, _bss_end /* stop here */
- mov r2, #0x00000000 /* clear */
-
-clbss_l:str r2, [r0] /* clear loop... */
- add r0, r0, #4
- cmp r0, r1
- bne clbss_l
-
- ldr pc, _start_armboot
-
-_start_armboot: .word start_armboot
-
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-
-cpu_init_crit:
- /*
- * flush v4 I/D caches
- */
- mov r0, #0
- mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
- mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
-
- /*
- * disable MMU stuff and caches
- */
- mrc p15, 0, r0, c1, c0, 0
- bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
- bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
- orr r0, r0, #0x00000002 @ set bit 2 (A) Align
- orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
- mcr p15, 0, r0, c1, c0, 0
-
-
- /*
- * before relocating, we have to setup RAM timing
- * because memory timing is board-dependend, you will
- * find a memsetup.S in your board directory.
- */
- mov ip, lr
- bl memsetup
- mov lr, ip
-
- mov pc, lr
-
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- ldr r2, _armboot_start
- sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
- sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
- ldmia r2, {r2 - r3} @ get pc, cpsr
- add r0, sp, #S_FRAME_SIZE @ restore sp_SVC
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, _armboot_start @ setup our mode stack
- sub r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
- sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-
- str lr, [r13] @ save caller lr / spsr
- mrs lr, spsr
- str lr, [r13, #4]
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13
- mov lr, pc
- movs pc, lr
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
-
- .align 5
-.globl reset_cpu
-reset_cpu:
- mov ip, #0
- mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
- mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4)
- mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
- bic ip, ip, #0x000f @ ............wcam
- bic ip, ip, #0x2100 @ ..v....s........
- mcr p15, 0, ip, c1, c0, 0 @ ctrl register
- mov pc, r0
diff --git a/cpu/mpc824x/cpu_init.c b/cpu/mpc824x/cpu_init.c
index 08f5c4ab13a..d0c7a3bcabc 100644
--- a/cpu/mpc824x/cpu_init.c
+++ b/cpu/mpc824x/cpu_init.c
@@ -108,7 +108,7 @@ cpu_init_f (void)
CONFIG_READ_BYTE(PCMBCR,val);
/* in order not to corrupt data which is being read over the PCI bus
- * with the PPC as master, we need to reduce the number of PCMRBs to 1,
+ * with the PPC as slave, we need to reduce the number of PCMRBs to 1,
* 4.11 in the processor user manual
* */
@@ -117,6 +117,10 @@ cpu_init_f (void)
#else
CONFIG_WRITE_BYTE(PCMBCR,(val|0x80)); /* 2 PCMRBs */
CONFIG_WRITE_BYTE(PCMBCR,(val|0x40)); /* 3 PCMRBs */
+ /* default, 4 PCMRBs are used, so don't change the
+ * register is this is _really_ what you want: data
+ * corruption with no performance gain
+ */
#endif
#endif
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index d40cd8c486c..787f7fadc98 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -33,7 +33,6 @@
void get_sys_info (sys_info_t * sysInfo)
{
- DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_gur_t *gur = &immap->im_gur;
uint plat_ratio,e500_ratio;
diff --git a/cpu/mpc8xx/scc.c b/cpu/mpc8xx/scc.c
index 78b2f9914dd..6b9110f1301 100644
--- a/cpu/mpc8xx/scc.c
+++ b/cpu/mpc8xx/scc.c
@@ -193,6 +193,10 @@ static int scc_init (struct eth_device *dev, bd_t * bis)
volatile immap_t *immr = (immap_t *) CFG_IMMR;
+#if defined(CONFIG_LWMON)
+ reset_phy();
+#endif
+
#ifdef CONFIG_FADS
#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC860T)
/* The MPC86xADS/FADS860T don't use the MODEM_EN or DATA_VOICE signals. */
@@ -550,6 +554,8 @@ static void scc_halt (struct eth_device *dev)
immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ immr->im_ioport.iop_pcso &= ~(PC_ENET_CLSN | PC_ENET_RENA);
}
#if 0
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
index 71f3ae1f458..fa0405f198d 100644
--- a/cpu/mpc8xx/serial.c
+++ b/cpu/mpc8xx/serial.c
@@ -24,49 +24,44 @@
#include <common.h>
#include <commproc.h>
#include <command.h>
+#include <serial.h>
#include <watchdog.h>
#if !defined(CONFIG_8xx_CONS_NONE) /* No Console at all */
#if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */
#define SMC_INDEX 0
-#undef SCC_INDEX
#define PROFF_SMC PROFF_SMC1
#define CPM_CR_CH_SMC CPM_CR_CH_SMC1
#elif defined(CONFIG_8xx_CONS_SMC2) /* Console on SMC2 */
#define SMC_INDEX 1
-#undef SCC_INDEX
#define PROFF_SMC PROFF_SMC2
#define CPM_CR_CH_SMC CPM_CR_CH_SMC2
-#elif defined(CONFIG_8xx_CONS_SCC1) /* Console on SCC1 */
-#undef SMC_INDEX
+#endif /* CONFIG_8xx_CONS_SMCx */
+
+#if defined(CONFIG_8xx_CONS_SCC1) /* Console on SCC1 */
#define SCC_INDEX 0
#define PROFF_SCC PROFF_SCC1
#define CPM_CR_CH_SCC CPM_CR_CH_SCC1
#elif defined(CONFIG_8xx_CONS_SCC2) /* Console on SCC2 */
-#undef SMC_INDEX
#define SCC_INDEX 1
#define PROFF_SCC PROFF_SCC2
#define CPM_CR_CH_SCC CPM_CR_CH_SCC2
#elif defined(CONFIG_8xx_CONS_SCC3) /* Console on SCC3 */
-#undef SMC_INDEX
#define SCC_INDEX 2
#define PROFF_SCC PROFF_SCC3
#define CPM_CR_CH_SCC CPM_CR_CH_SCC3
#elif defined(CONFIG_8xx_CONS_SCC4) /* Console on SCC4 */
-#undef SMC_INDEX
#define SCC_INDEX 3
#define PROFF_SCC PROFF_SCC4
#define CPM_CR_CH_SCC CPM_CR_CH_SCC4
-#else /* CONFIG_8xx_CONS_? */
-#error "console not correctly defined"
-#endif
+#endif /* CONFIG_8xx_CONS_SCCx */
static void serial_setdivisor(volatile cpm8xx_t *cp)
{
@@ -96,7 +91,23 @@ static void serial_setdivisor(volatile cpm8xx_t *cp)
* as serial console interface.
*/
-int serial_init (void)
+static void smc_setbrg (void)
+{
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+
+ /* Set up the baud rate generator.
+ * See 8xx_io/commproc.c for details.
+ *
+ * Wire BRG1 to SMCx
+ */
+
+ cp->cp_simode = 0x00000000;
+
+ serial_setdivisor(cp);
+}
+
+static int smc_init (void)
{
volatile immap_t *im = (immap_t *)CFG_IMMR;
volatile smc_t *sp;
@@ -217,7 +228,7 @@ int serial_init (void)
/* Set up the baud rate generator.
*/
- serial_setbrg ();
+ smc_setbrg ();
/* Make the first buffer the only buffer.
*/
@@ -247,39 +258,8 @@ int serial_init (void)
return (0);
}
-void
-serial_setbrg (void)
-{
- volatile immap_t *im = (immap_t *)CFG_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-
- /* Set up the baud rate generator.
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SMCx
- */
-
- cp->cp_simode = 0x00000000;
-
- serial_setdivisor(cp);
-}
-
-#ifdef CONFIG_MODEM_SUPPORT
-void disable_putc(void)
-{
- DECLARE_GLOBAL_DATA_PTR;
- gd->be_quiet = 1;
-}
-
-void enable_putc(void)
-{
- DECLARE_GLOBAL_DATA_PTR;
- gd->be_quiet = 0;
-}
-#endif
-
-void
-serial_putc(const char c)
+static void
+smc_putc(const char c)
{
volatile cbd_t *tbdf;
volatile char *buf;
@@ -295,7 +275,7 @@ serial_putc(const char c)
#endif
if (c == '\n')
- serial_putc ('\r');
+ smc_putc ('\r');
up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
@@ -317,8 +297,16 @@ serial_putc(const char c)
}
}
-int
-serial_getc(void)
+static void
+smc_puts (const char *s)
+{
+ while (*s) {
+ smc_putc (*s++);
+ }
+}
+
+static int
+smc_getc(void)
{
volatile cbd_t *rbdf;
volatile unsigned char *buf;
@@ -344,8 +332,8 @@ serial_getc(void)
return(c);
}
-int
-serial_tstc()
+static int
+smc_tstc(void)
{
volatile cbd_t *rbdf;
volatile smc_uart_t *up;
@@ -359,9 +347,41 @@ serial_tstc()
return(!(rbdf->cbd_sc & BD_SC_EMPTY));
}
-#else /* ! CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2 */
+struct serial_device serial_smc_device =
+{
+ "serial_smc",
+ "SMC",
+ smc_init,
+ smc_setbrg,
+ smc_getc,
+ smc_tstc,
+ smc_putc,
+ smc_puts,
+};
+
+#endif /* CONFIG_8xx_CONS_SMC1 || CONFIG_8xx_CONS_SMC2 */
+
+#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
+ defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
+
+static void
+scc_setbrg (void)
+{
+ volatile immap_t *im = (immap_t *)CFG_IMMR;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
-int serial_init (void)
+ /* Set up the baud rate generator.
+ * See 8xx_io/commproc.c for details.
+ *
+ * Wire BRG1 to SCCx
+ */
+
+ cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
+
+ serial_setdivisor(cp);
+}
+
+static int scc_init (void)
{
volatile immap_t *im = (immap_t *)CFG_IMMR;
volatile scc_t *sp;
@@ -426,7 +446,7 @@ int serial_init (void)
#ifdef CFG_ALLOC_DPRAM
dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
#else
- dpaddr = CPM_SERIAL_BASE ;
+ dpaddr = CPM_SERIAL2_BASE ;
#endif
/* Enable SDMA.
@@ -446,7 +466,7 @@ int serial_init (void)
/* Set up the baud rate generator.
*/
- serial_setbrg ();
+ scc_setbrg ();
/* Set up the uart parameters in the parameter ram.
*/
@@ -497,9 +517,11 @@ int serial_init (void)
/* Set UART mode, clock divider 16 on Tx and Rx
*/
+ sp->scc_gsmrl &= ~0xF;
sp->scc_gsmrl |=
(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+ sp->scc_psmr = 0;
sp->scc_psmr |= SCU_PSMR_CL;
/* Mask all interrupts and remove anything pending.
@@ -521,25 +543,8 @@ int serial_init (void)
return (0);
}
-void
-serial_setbrg (void)
-{
- volatile immap_t *im = (immap_t *)CFG_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-
- /* Set up the baud rate generator.
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SCCx
- */
-
- cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
-
- serial_setdivisor(cp);
-}
-
-void
-serial_putc(const char c)
+static void
+scc_putc(const char c)
{
volatile cbd_t *tbdf;
volatile char *buf;
@@ -547,8 +552,15 @@ serial_putc(const char c)
volatile immap_t *im = (immap_t *)CFG_IMMR;
volatile cpm8xx_t *cpmp = &(im->im_cpm);
+#ifdef CONFIG_MODEM_SUPPORT
+ DECLARE_GLOBAL_DATA_PTR;
+
+ if (gd->be_quiet)
+ return;
+#endif
+
if (c == '\n')
- serial_putc ('\r');
+ scc_putc ('\r');
up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
@@ -570,8 +582,16 @@ serial_putc(const char c)
}
}
-int
-serial_getc(void)
+static void
+scc_puts (const char *s)
+{
+ while (*s) {
+ scc_putc (*s++);
+ }
+}
+
+static int
+scc_getc(void)
{
volatile cbd_t *rbdf;
volatile unsigned char *buf;
@@ -597,8 +617,8 @@ serial_getc(void)
return(c);
}
-int
-serial_tstc()
+static int
+scc_tstc(void)
{
volatile cbd_t *rbdf;
volatile scc_uart_t *up;
@@ -612,36 +632,66 @@ serial_tstc()
return(!(rbdf->cbd_sc & BD_SC_EMPTY));
}
-#endif /* CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2 */
-
+struct serial_device serial_scc_device =
+{
+ "serial_scc",
+ "SCC",
+ scc_init,
+ scc_setbrg,
+ scc_getc,
+ scc_tstc,
+ scc_putc,
+ scc_puts,
+};
+
+#endif /* CONFIG_8xx_CONS_SCCx */
-void
-serial_puts (const char *s)
+#ifdef CONFIG_MODEM_SUPPORT
+void disable_putc(void)
{
- while (*s) {
- serial_putc (*s++);
- }
+ DECLARE_GLOBAL_DATA_PTR;
+ gd->be_quiet = 1;
}
+void enable_putc(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ gd->be_quiet = 0;
+}
+#endif
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
void
kgdb_serial_init(void)
{
+ int i = -1;
+
+ if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
+ {
#if defined(CONFIG_8xx_CONS_SMC1)
- serial_printf("[on SMC1] ");
+ i = 1;
#elif defined(CONFIG_8xx_CONS_SMC2)
- serial_printf("[on SMC2] ");
-#elif defined(CONFIG_8xx_CONS_SCC1)
- serial_printf("[on SCC1] ");
+ i = 2;
+#endif
+ }
+ else if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
+ {
+#if defined(CONFIG_8xx_CONS_SCC1)
+ i = 1;
#elif defined(CONFIG_8xx_CONS_SCC2)
- serial_printf("[on SCC2] ");
+ i = 2;
#elif defined(CONFIG_8xx_CONS_SCC3)
- serial_printf("[on SCC3] ");
+ i = 3;
#elif defined(CONFIG_8xx_CONS_SCC4)
- serial_printf("[on SCC4] ");
+ i = 4;
#endif
+ }
+
+ if (i >= 0)
+ {
+ serial_printf("[on %s%d] ", default_serial_console()->ctlr, i);
+ }
}
void
diff --git a/cpu/mpc8xx/spi.c b/cpu/mpc8xx/spi.c
index 5d752077339..9213d101a72 100644
--- a/cpu/mpc8xx/spi.c
+++ b/cpu/mpc8xx/spi.c
@@ -39,7 +39,7 @@
#include <linux/ctype.h>
#include <malloc.h>
#include <post.h>
-#include <net.h>
+#include <serial.h>
#if (defined(CONFIG_SPI)) || (CONFIG_POST & CFG_POST_SPI)
@@ -542,13 +542,13 @@ int spi_post_test (int flags)
cp->cp_spmode &= ~SPMODE_LOOP;
/*
- * SCC2 Ethernet parameter RAM space overlaps
+ * SCC2 parameter RAM space overlaps
* the SPI parameter RAM space. So we need to restore
- * the SCC2 configuration if it is used by UART or Ethernet.
+ * the SCC2 configuration if it is used by UART.
*/
-#if defined(CONFIG_8xx_CONS_SCC2)
- serial_init ();
+#if !defined(CONFIG_8xx_CONS_NONE)
+ serial_reinit_all ();
#endif
if (res != 0) {
diff --git a/doc/README.serial_multi b/doc/README.serial_multi
new file mode 100644
index 00000000000..1d73376b2c7
--- /dev/null
+++ b/doc/README.serial_multi
@@ -0,0 +1,37 @@
+The support for multiple serial interfaces as implemented is mainly
+intended to allow for modem dial-in / dial-out while still being able
+to use a serial console on a (different) serial port.
+
+At the moment, the ports must be split on a SMC and a SCC port on a
+8xx processor; other configurations are not (yet) supported.
+
+Support for hardware handshake has not been implemented yet (but is
+in the works).
+
+*) The default console depends on the keys pressed:
+ - SMC if keys not pressed (modem not enabled)
+ - SCC if keys pressed (modem enabled)
+
+*) The console can be switched to SCC by any of the following commands:
+
+ setenv stdout serial_scc
+ setenv stdin serial_scc
+ setenv stderr serial_scc
+
+*) The console can be switched to SMC by any of the following commands:
+
+ setenv stdout serial_smc
+ setenv stdin serial_smc
+ setenv stderr serial_smc
+
+*) If a file descriptor is set to "serial" then the current serial device
+will be used which, in turn, can be switched by above commands.
+
+*) The baudrate is the same for all serial devices. But it can be switched
+just after switching the console:
+
+ setenv sout serial_scc; setenv baudrate 38400
+
+After that press 'enter' at the SCC console. Note that baudrates <38400
+are not allowed on LWMON with watchdog enabled (see CFG_BAUDRATE_TABLE in
+include/configs/lwmon.h).
diff --git a/drivers/Makefile b/drivers/Makefile
index 11738b99993..afca70e2d0c 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -29,23 +29,23 @@ LIB = libdrivers.a
OBJS = 3c589.o 5701rls.o ali512x.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
- cs8900.o ct69000.o dataflash.o dc2114x.o \
+ cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
e1000.o eepro100.o \
i8042.o i82365.o inca-ip_sw.o keyboard.o \
lan91c96.o natsemi.o netarm_eth.o \
- ns16550.o ns8382x.o ns87308.o \
+ ns16550.o ns8382x.o ns87308.o omap1510_i2c.o \
pci.o pci_auto.o pci_indirect.o \
pcnet.o plb2800_eth.o \
ps2ser.o ps2mult.o pc_keyb.o \
rtl8019.o rtl8139.o rtl8169.o \
s3c24x0_i2c.o s3c4510b_eth.o s3c4510b_uart.o \
sed13806.o sed156x.o \
- serial.o serial_max3100.o serial_pl010.o serial_pl011.o \
- serial_xuartlite.o sl811_usb.o \
- smc91111.o smiLynxEM.o status_led.o sym53c8xx.o \
- ti_pci1410a.o tigon3.o w83c553f.o omap1510_i2c.o \
+ serial.o serial_imx.o serial_max3100.o \
+ serial_pl010.o serial_pl011.o serial_xuartlite.o \
+ sl811_usb.o smc91111.o smiLynxEM.o status_led.o sym53c8xx.o \
+ ti_pci1410a.o tigon3.o \
usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
- videomodes.o
+ videomodes.o w83c553f.o
all: $(LIB)
diff --git a/drivers/cfb_console.c b/drivers/cfb_console.c
index 6a8df79277a..3d26ae2d508 100644
--- a/drivers/cfb_console.c
+++ b/drivers/cfb_console.c
@@ -1169,7 +1169,6 @@ int drv_video_init (void)
{
int skip_dev_init;
device_t console_dev;
- char *penv;
skip_dev_init = 0;
diff --git a/drivers/dm9000x.c b/drivers/dm9000x.c
new file mode 100644
index 00000000000..0e475d47237
--- /dev/null
+++ b/drivers/dm9000x.c
@@ -0,0 +1,590 @@
+/*
+ dm9000.c: Version 1.2 12/15/2003
+
+ A Davicom DM9000 ISA NIC fast Ethernet driver for Linux.
+ Copyright (C) 1997 Sten Wang
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
+
+V0.11 06/20/2001 REG_0A bit3=1, default enable BP with DA match
+ 06/22/2001 Support DM9801 progrmming
+ E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
+ E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
+ R17 = (R17 & 0xfff0) | NF + 3
+ E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
+ R17 = (R17 & 0xfff0) | NF
+
+v1.00 modify by simon 2001.9.5
+ change for kernel 2.4.x
+
+v1.1 11/09/2001 fix force mode bug
+
+v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>:
+ Fixed phy reset.
+ Added tx/rx 32 bit mode.
+ Cleaned up for kernel merge.
+
+--------------------------------------
+
+ 12/15/2003 Initial port to u-boot by Sascha Hauer <saschahauer@web.de>
+
+TODO: Homerun NIC and longrun NIC are not functional, only internal at the
+ moment.
+*/
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_DRIVER_DM9000
+
+#include "dm9000x.h"
+
+/* Board/System/Debug information/definition ---------------- */
+
+#define DM9801_NOISE_FLOOR 0x08
+#define DM9802_NOISE_FLOOR 0x05
+
+/* #define CONFIG_DM9000_DEBUG */
+
+#ifdef CONFIG_DM9000_DEBUG
+#define DM9000_DBG(fmt,args...) printf(fmt ,##args)
+#else /* */
+#define DM9000_DBG(fmt,args...)
+#endif /* */
+enum DM9000_PHY_mode { DM9000_10MHD = 0, DM9000_100MHD =
+ 1, DM9000_10MFD = 4, DM9000_100MFD = 5, DM9000_AUTO =
+ 8, DM9000_1M_HPNA = 0x10
+};
+enum DM9000_NIC_TYPE { FASTETHER_NIC = 0, HOMERUN_NIC = 1, LONGRUN_NIC = 2
+};
+
+/* Structure/enum declaration ------------------------------- */
+typedef struct board_info {
+ u32 runt_length_counter; /* counter: RX length < 64byte */
+ u32 long_length_counter; /* counter: RX length > 1514byte */
+ u32 reset_counter; /* counter: RESET */
+ u32 reset_tx_timeout; /* RESET caused by TX Timeout */
+ u32 reset_rx_status; /* RESET caused by RX Statsus wrong */
+ u16 tx_pkt_cnt;
+ u16 queue_start_addr;
+ u16 dbug_cnt;
+ u8 phy_addr;
+ u8 device_wait_reset; /* device state */
+ u8 nic_type; /* NIC type */
+ unsigned char srom[128];
+} board_info_t;
+board_info_t dmfe_info;
+
+/* For module input parameter */
+static int media_mode = DM9000_AUTO;
+static u8 nfloor = 0;
+
+/* function declaration ------------------------------------- */
+int eth_init(bd_t * bd);
+int eth_send(volatile void *, int);
+int eth_rx(void);
+void eth_halt(void);
+static int dm9000_probe(void);
+static u16 phy_read(int);
+static void phy_write(int, u16);
+static u16 read_srom_word(int);
+static u8 DM9000_ior(int);
+static void DM9000_iow(int reg, u8 value);
+
+/* DM9000 network board routine ---------------------------- */
+
+#define DM9000_outb(d,r) ( *(volatile u8 *)r = d )
+#define DM9000_outw(d,r) ( *(volatile u16 *)r = d )
+#define DM9000_outl(d,r) ( *(volatile u32 *)r = d )
+#define DM9000_inb(r) (*(volatile u8 *)r)
+#define DM9000_inw(r) (*(volatile u16 *)r)
+#define DM9000_inl(r) (*(volatile u32 *)r)
+
+#ifdef CONFIG_DM9000_DEBUG
+static void
+dump_regs(void)
+{
+ DM9000_DBG("\n");
+ DM9000_DBG("NCR (0x00): %02x\n", DM9000_ior(0));
+ DM9000_DBG("NSR (0x01): %02x\n", DM9000_ior(1));
+ DM9000_DBG("TCR (0x02): %02x\n", DM9000_ior(2));
+ DM9000_DBG("TSRI (0x03): %02x\n", DM9000_ior(3));
+ DM9000_DBG("TSRII (0x04): %02x\n", DM9000_ior(4));
+ DM9000_DBG("RCR (0x05): %02x\n", DM9000_ior(5));
+ DM9000_DBG("RSR (0x06): %02x\n", DM9000_ior(6));
+ DM9000_DBG("ISR (0xFE): %02x\n", DM9000_ior(ISR));
+ DM9000_DBG("\n");
+}
+#endif /* */
+
+/*
+ Search DM9000 board, allocate space and register it
+*/
+int
+dm9000_probe(void)
+{
+ u32 id_val;
+ id_val = DM9000_ior(DM9000_VIDL);
+ id_val |= DM9000_ior(DM9000_VIDH) << 8;
+ id_val |= DM9000_ior(DM9000_PIDL) << 16;
+ id_val |= DM9000_ior(DM9000_PIDH) << 24;
+ if (id_val == DM9000_ID) {
+ printf("dm9000 i/o: 0x%x, id: 0x%x \n", CONFIG_DM9000_BASE,
+ id_val);
+ return 0;
+ } else {
+ printf("dm9000 not found at 0x%08x id: 0x%08x\n",
+ CONFIG_DM9000_BASE, id_val);
+ return -1;
+ }
+}
+
+/* Set PHY operationg mode
+*/
+static void
+set_PHY_mode(void)
+{
+ u16 phy_reg4 = 0x01e1, phy_reg0 = 0x1000;
+ if (!(media_mode & DM9000_AUTO)) {
+ switch (media_mode) {
+ case DM9000_10MHD:
+ phy_reg4 = 0x21;
+ phy_reg0 = 0x0000;
+ break;
+ case DM9000_10MFD:
+ phy_reg4 = 0x41;
+ phy_reg0 = 0x1100;
+ break;
+ case DM9000_100MHD:
+ phy_reg4 = 0x81;
+ phy_reg0 = 0x2000;
+ break;
+ case DM9000_100MFD:
+ phy_reg4 = 0x101;
+ phy_reg0 = 0x3100;
+ break;
+ }
+ phy_write(4, phy_reg4); /* Set PHY media mode */
+ phy_write(0, phy_reg0); /* Tmp */
+ }
+ DM9000_iow(DM9000_GPCR, 0x01); /* Let GPIO0 output */
+ DM9000_iow(DM9000_GPR, 0x00); /* Enable PHY */
+}
+
+/*
+ Init HomeRun DM9801
+*/
+static void
+program_dm9801(u16 HPNA_rev)
+{
+ __u16 reg16, reg17, reg24, reg25;
+ if (!nfloor)
+ nfloor = DM9801_NOISE_FLOOR;
+ reg16 = phy_read(16);
+ reg17 = phy_read(17);
+ reg24 = phy_read(24);
+ reg25 = phy_read(25);
+ switch (HPNA_rev) {
+ case 0xb900: /* DM9801 E3 */
+ reg16 |= 0x1000;
+ reg25 = ((reg24 + nfloor) & 0x00ff) | 0xf000;
+ break;
+ case 0xb901: /* DM9801 E4 */
+ reg25 = ((reg24 + nfloor) & 0x00ff) | 0xc200;
+ reg17 = (reg17 & 0xfff0) + nfloor + 3;
+ break;
+ case 0xb902: /* DM9801 E5 */
+ case 0xb903: /* DM9801 E6 */
+ default:
+ reg16 |= 0x1000;
+ reg25 = ((reg24 + nfloor - 3) & 0x00ff) | 0xc200;
+ reg17 = (reg17 & 0xfff0) + nfloor;
+ }
+ phy_write(16, reg16);
+ phy_write(17, reg17);
+ phy_write(25, reg25);
+}
+
+/*
+ Init LongRun DM9802
+*/
+static void
+program_dm9802(void)
+{
+ __u16 reg25;
+ if (!nfloor)
+ nfloor = DM9802_NOISE_FLOOR;
+ reg25 = phy_read(25);
+ reg25 = (reg25 & 0xff00) + nfloor;
+ phy_write(25, reg25);
+}
+
+/* Identify NIC type
+*/
+static void
+identify_nic(void)
+{
+ struct board_info *db = &dmfe_info; /* Point a board information structure */
+ u16 phy_reg3;
+ DM9000_iow(DM9000_NCR, NCR_EXT_PHY);
+ phy_reg3 = phy_read(3);
+ switch (phy_reg3 & 0xfff0) {
+ case 0xb900:
+ if (phy_read(31) == 0x4404) {
+ db->nic_type = HOMERUN_NIC;
+ program_dm9801(phy_reg3);
+ DM9000_DBG("found homerun NIC\n");
+ } else {
+ db->nic_type = LONGRUN_NIC;
+ DM9000_DBG("found longrun NIC\n");
+ program_dm9802();
+ }
+ break;
+ default:
+ db->nic_type = FASTETHER_NIC;
+ break;
+ }
+ DM9000_iow(DM9000_NCR, 0);
+}
+
+/* General Purpose dm9000 reset routine */
+static void
+dm9000_reset(void)
+{
+ DM9000_DBG("resetting\n");
+ DM9000_iow(DM9000_NCR, NCR_RST);
+ udelay(1000); /* delay 1ms */
+}
+
+/* Initilize dm9000 board
+*/
+int
+eth_init(bd_t * bd)
+{
+ int i, oft, lnk;
+ DM9000_DBG("eth_init()\n");
+
+ /* RESET device */
+ dm9000_reset();
+ dm9000_probe();
+
+ /* NIC Type: FASTETHER, HOMERUN, LONGRUN */
+ identify_nic();
+
+ /* GPIO0 on pre-activate PHY */
+ DM9000_iow(DM9000_GPR, 0x00); /*REG_1F bit0 activate phyxcer */
+
+ /* Set PHY */
+ set_PHY_mode();
+
+ /* Program operating register */
+ DM9000_iow(DM9000_NCR, 0x0); /* only intern phy supported by now */
+ DM9000_iow(DM9000_TCR, 0); /* TX Polling clear */
+ DM9000_iow(DM9000_BPTR, 0x3f); /* Less 3Kb, 200us */
+ DM9000_iow(DM9000_FCTR, FCTR_HWOT(3) | FCTR_LWOT(8)); /* Flow Control : High/Low Water */
+ DM9000_iow(DM9000_FCR, 0x0); /* SH FIXME: This looks strange! Flow Control */
+ DM9000_iow(DM9000_SMCR, 0); /* Special Mode */
+ DM9000_iow(DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END); /* clear TX status */
+ DM9000_iow(DM9000_ISR, 0x0f); /* Clear interrupt status */
+
+ /* Set Node address */
+ for (i = 0; i < 6; i++)
+ ((u16 *) bd->bi_enetaddr)[i] = read_srom_word(i);
+ printf("MAC: %02x:%02x:%02x:%02x:%02x:%02x\n", bd->bi_enetaddr[0],
+ bd->bi_enetaddr[1], bd->bi_enetaddr[2], bd->bi_enetaddr[3],
+ bd->bi_enetaddr[4], bd->bi_enetaddr[5]);
+ for (i = 0, oft = 0x10; i < 6; i++, oft++)
+ DM9000_iow(oft, bd->bi_enetaddr[i]);
+ for (i = 0, oft = 0x16; i < 8; i++, oft++)
+ DM9000_iow(oft, 0xff);
+
+ /* read back mac, just to be sure */
+ for (i = 0, oft = 0x10; i < 6; i++, oft++)
+ DM9000_DBG("%02x:", DM9000_ior(oft));
+ DM9000_DBG("\n");
+
+ /* Activate DM9000 */
+ DM9000_iow(DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN); /* RX enable */
+ DM9000_iow(DM9000_IMR, IMR_PAR); /* Enable TX/RX interrupt mask */
+ i = 0;
+ while (!(phy_read(1) & 0x20)) { /* autonegation complete bit */
+ udelay(1000);
+ i++;
+ if (i == 10000) {
+ printf("could not establish link\n");
+ return 0;
+ }
+ }
+
+ /* see what we've got */
+ lnk = phy_read(17) >> 12;
+ printf("operating at ");
+ switch (lnk) {
+ case 1:
+ printf("10M half duplex ");
+ break;
+ case 2:
+ printf("10M full duplex ");
+ break;
+ case 4:
+ printf("100M half duplex ");
+ break;
+ case 8:
+ printf("100M full duplex ");
+ break;
+ default:
+ printf("unknown: %d ", lnk);
+ break;
+ }
+ printf("mode\n");
+ return 0;
+}
+
+/*
+ Hardware start transmission.
+ Send a packet to media from the upper layer.
+*/
+int
+eth_send(volatile void *packet, int length)
+{
+ char *data_ptr;
+ u32 tmplen, i;
+ int tmo;
+ DM9000_DBG("eth_send: length: %d\n", length);
+ for (i = 0; i < length; i++) {
+ if (i % 8 == 0)
+ DM9000_DBG("\nSend: 02x: ", i);
+ DM9000_DBG("%02x ", ((unsigned char *) packet)[i]);
+ } DM9000_DBG("\n");
+
+ /* Move data to DM9000 TX RAM */
+ data_ptr = (char *) packet;
+ DM9000_outb(DM9000_MWCMD, DM9000_IO);
+
+#ifdef CONFIG_DM9000_USE_8BIT
+ /* Byte mode */
+ for (i = 0; i < length; i++)
+ DM9000_outb((data_ptr[i] & 0xff), DM9000_DATA);
+
+#endif /* */
+#ifdef CONFIG_DM9000_USE_16BIT
+ tmplen = (length + 1) / 2;
+ for (i = 0; i < tmplen; i++)
+ DM9000_outw(((u16 *) data_ptr)[i], DM9000_DATA);
+
+#endif /* */
+#ifdef CONFIG_DM9000_USE_32BIT
+ tmplen = (length + 3) / 4;
+ for (i = 0; i < tmplen; i++)
+ DM9000_outl(((u32 *) data_ptr)[i], DM9000_DATA);
+
+#endif /* */
+
+ /* Set TX length to DM9000 */
+ DM9000_iow(DM9000_TXPLL, length & 0xff);
+ DM9000_iow(DM9000_TXPLH, (length >> 8) & 0xff);
+
+ /* Issue TX polling command */
+ DM9000_iow(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
+
+ /* wait for end of transmission */
+ tmo = get_timer(0) + 5 * CFG_HZ;
+ while (DM9000_ior(DM9000_TCR) & TCR_TXREQ) {
+ if (get_timer(0) >= tmo) {
+ printf("transmission timeout\n");
+ break;
+ }
+ }
+ DM9000_DBG("transmit done\n\n");
+ return 0;
+}
+
+/*
+ Stop the interface.
+ The interface is stopped when it is brought.
+*/
+void
+eth_halt(void)
+{
+ DM9000_DBG("eth_halt\n");
+
+ /* RESET devie */
+ phy_write(0, 0x8000); /* PHY RESET */
+ DM9000_iow(DM9000_GPR, 0x01); /* Power-Down PHY */
+ DM9000_iow(DM9000_IMR, 0x80); /* Disable all interrupt */
+ DM9000_iow(DM9000_RCR, 0x00); /* Disable RX */
+}
+
+/*
+ Received a packet and pass to upper layer
+*/
+int
+eth_rx(void)
+{
+ u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
+ u16 RxStatus, RxLen = 0;
+ u32 tmplen, i;
+
+ /* Check packet ready or not */
+ DM9000_ior(DM9000_MRCMDX); /* Dummy read */
+ rxbyte = DM9000_inb(DM9000_DATA); /* Got most updated data */
+ if (rxbyte == 0)
+ return 0;
+
+ /* Status check: this byte must be 0 or 1 */
+ if (rxbyte > 1) {
+ DM9000_iow(DM9000_RCR, 0x00); /* Stop Device */
+ DM9000_iow(DM9000_ISR, 0x80); /* Stop INT request */
+ DM9000_DBG("rx status check: %d\n", rxbyte);
+ }
+ DM9000_DBG("receiving packet\n");
+
+ /* A packet ready now & Get status/length */
+ DM9000_outb(DM9000_MRCMD, DM9000_IO);
+
+#ifdef CONFIG_DM9000_USE_8BIT
+ RxStatus = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
+ RxLen = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
+
+#endif /* */
+#ifdef CONFIG_DM9000_USE_16BIT
+ RxStatus = DM9000_inw(DM9000_DATA);
+ RxLen = DM9000_inw(DM9000_DATA);
+
+#endif /* */
+#ifdef CONFIG_DM9000_USE_32BIT
+ tmpdata = DM9000_inl(DM9000_DATA);
+ RxStatus = tmpdata;
+ RxLen = tmpdata >> 16;
+
+#endif /* */
+ DM9000_DBG("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
+
+ /* Move data from DM9000 */
+ /* Read received packet from RX SRAM */
+#ifdef CONFIG_DM9000_USE_8BIT
+ for (i = 0; i < RxLen; i++)
+ rdptr[i] = DM9000_inb(DM9000_DATA);
+
+#endif /* */
+#ifdef CONFIG_DM9000_USE_16BIT
+ tmplen = (RxLen + 1) / 2;
+ for (i = 0; i < tmplen; i++)
+ ((u16 *) rdptr)[i] = DM9000_inw(DM9000_DATA);
+
+#endif /* */
+#ifdef CONFIG_DM9000_USE_32BIT
+ tmplen = (RxLen + 3) / 4;
+ for (i = 0; i < tmplen; i++)
+ ((u32 *) rdptr)[i] = DM9000_inl(DM9000_DATA);
+
+#endif /* */
+ if ((RxStatus & 0xbf00) || (RxLen < 0x40)
+ || (RxLen > DM9000_PKT_MAX)) {
+ if (RxStatus & 0x100) {
+ printf("rx fifo error\n");
+ }
+ if (RxStatus & 0x200) {
+ printf("rx crc error\n");
+ }
+ if (RxStatus & 0x8000) {
+ printf("rx length error\n");
+ }
+ if (RxLen > DM9000_PKT_MAX) {
+ printf("rx length too big\n");
+ dm9000_reset();
+ }
+ } else {
+
+ /* Pass to upper layer */
+ DM9000_DBG("passing packet to upper layer\n");
+ NetReceive(NetRxPackets[0], RxLen);
+ return RxLen;
+ }
+ return 0;
+}
+
+/*
+ Read a word data from SROM
+*/
+static u16
+read_srom_word(int offset)
+{
+ DM9000_iow(DM9000_EPAR, offset);
+ DM9000_iow(DM9000_EPCR, 0x4);
+ udelay(200);
+ DM9000_iow(DM9000_EPCR, 0x0);
+ return (DM9000_ior(DM9000_EPDRL) + (DM9000_ior(DM9000_EPDRH) << 8));
+}
+
+/*
+ Read a byte from I/O port
+*/
+static u8
+DM9000_ior(int reg)
+{
+ DM9000_outb(reg, DM9000_IO);
+ return DM9000_inb(DM9000_DATA);
+}
+
+/*
+ Write a byte to I/O port
+*/
+static void
+DM9000_iow(int reg, u8 value)
+{
+ DM9000_outb(reg, DM9000_IO);
+ DM9000_outb(value, DM9000_DATA);
+}
+
+/*
+ Read a word from phyxcer
+*/
+static u16
+phy_read(int reg)
+{
+ u16 val;
+
+ /* Fill the phyxcer register into REG_0C */
+ DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
+ DM9000_iow(DM9000_EPCR, 0xc); /* Issue phyxcer read command */
+ udelay(100); /* Wait read complete */
+ DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer read command */
+ val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
+
+ /* The read data keeps on REG_0D & REG_0E */
+ DM9000_DBG("phy_read(%d): %d\n", reg, val);
+ return val;
+}
+
+/*
+ Write a word to phyxcer
+*/
+static void
+phy_write(int reg, u16 value)
+{
+
+ /* Fill the phyxcer register into REG_0C */
+ DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Fill the written data into REG_0D & REG_0E */
+ DM9000_iow(DM9000_EPDRL, (value & 0xff));
+ DM9000_iow(DM9000_EPDRH, ((value >> 8) & 0xff));
+ DM9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */
+ udelay(500); /* Wait write complete */
+ DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */
+ DM9000_DBG("phy_write(reg:%d, value:%d)\n", reg, value);
+}
+#endif /* CONFIG_DRIVER_DM9000 */
diff --git a/drivers/dm9000x.h b/drivers/dm9000x.h
new file mode 100644
index 00000000000..f47ff8cb344
--- /dev/null
+++ b/drivers/dm9000x.h
@@ -0,0 +1,119 @@
+/*
+ * dm9000 Ethernet
+ */
+
+#ifdef CONFIG_DRIVER_DM9000
+
+#define DM9000_ID 0x90000A46
+#define DM9000_PKT_MAX 1536 /* Received packet max size */
+#define DM9000_PKT_RDY 0x01 /* Packet ready to receive */
+
+/* although the registers are 16 bit, they are 32-bit aligned.
+ */
+
+#define DM9000_NCR 0x00
+#define DM9000_NSR 0x01
+#define DM9000_TCR 0x02
+#define DM9000_TSR1 0x03
+#define DM9000_TSR2 0x04
+#define DM9000_RCR 0x05
+#define DM9000_RSR 0x06
+#define DM9000_ROCR 0x07
+#define DM9000_BPTR 0x08
+#define DM9000_FCTR 0x09
+#define DM9000_FCR 0x0A
+#define DM9000_EPCR 0x0B
+#define DM9000_EPAR 0x0C
+#define DM9000_EPDRL 0x0D
+#define DM9000_EPDRH 0x0E
+#define DM9000_WCR 0x0F
+
+#define DM9000_PAR 0x10
+#define DM9000_MAR 0x16
+
+#define DM9000_GPCR 0x1e
+#define DM9000_GPR 0x1f
+#define DM9000_TRPAL 0x22
+#define DM9000_TRPAH 0x23
+#define DM9000_RWPAL 0x24
+#define DM9000_RWPAH 0x25
+
+#define DM9000_VIDL 0x28
+#define DM9000_VIDH 0x29
+#define DM9000_PIDL 0x2A
+#define DM9000_PIDH 0x2B
+
+#define DM9000_CHIPR 0x2C
+#define DM9000_SMCR 0x2F
+
+#define DM9000_PHY 0x40 /* PHY address 0x01 */
+
+#define DM9000_MRCMDX 0xF0
+#define DM9000_MRCMD 0xF2
+#define DM9000_MRRL 0xF4
+#define DM9000_MRRH 0xF5
+#define DM9000_MWCMDX 0xF6
+#define DM9000_MWCMD 0xF8
+#define DM9000_MWRL 0xFA
+#define DM9000_MWRH 0xFB
+#define DM9000_TXPLL 0xFC
+#define DM9000_TXPLH 0xFD
+#define DM9000_ISR 0xFE
+#define DM9000_IMR 0xFF
+
+#define NCR_EXT_PHY (1<<7)
+#define NCR_WAKEEN (1<<6)
+#define NCR_FCOL (1<<4)
+#define NCR_FDX (1<<3)
+#define NCR_LBK (3<<1)
+#define NCR_RST (1<<0)
+
+#define NSR_SPEED (1<<7)
+#define NSR_LINKST (1<<6)
+#define NSR_WAKEST (1<<5)
+#define NSR_TX2END (1<<3)
+#define NSR_TX1END (1<<2)
+#define NSR_RXOV (1<<1)
+
+#define TCR_TJDIS (1<<6)
+#define TCR_EXCECM (1<<5)
+#define TCR_PAD_DIS2 (1<<4)
+#define TCR_CRC_DIS2 (1<<3)
+#define TCR_PAD_DIS1 (1<<2)
+#define TCR_CRC_DIS1 (1<<1)
+#define TCR_TXREQ (1<<0)
+
+#define TSR_TJTO (1<<7)
+#define TSR_LC (1<<6)
+#define TSR_NC (1<<5)
+#define TSR_LCOL (1<<4)
+#define TSR_COL (1<<3)
+#define TSR_EC (1<<2)
+
+#define RCR_WTDIS (1<<6)
+#define RCR_DIS_LONG (1<<5)
+#define RCR_DIS_CRC (1<<4)
+#define RCR_ALL (1<<3)
+#define RCR_RUNT (1<<2)
+#define RCR_PRMSC (1<<1)
+#define RCR_RXEN (1<<0)
+
+#define RSR_RF (1<<7)
+#define RSR_MF (1<<6)
+#define RSR_LCS (1<<5)
+#define RSR_RWTO (1<<4)
+#define RSR_PLE (1<<3)
+#define RSR_AE (1<<2)
+#define RSR_CE (1<<1)
+#define RSR_FOE (1<<0)
+
+#define FCTR_HWOT(ot) (( ot & 0xf ) << 4 )
+#define FCTR_LWOT(ot) ( ot & 0xf )
+
+#define IMR_PAR (1<<7)
+#define IMR_ROOM (1<<3)
+#define IMR_ROM (1<<2)
+#define IMR_PTM (1<<1)
+#define IMR_PRM (1<<0)
+
+#endif
diff --git a/drivers/serial_imx.c b/drivers/serial_imx.c
new file mode 100644
index 00000000000..9dbaa569a09
--- /dev/null
+++ b/drivers/serial_imx.c
@@ -0,0 +1,201 @@
+/*
+ * (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#if defined (CONFIG_IMX)
+
+#include <asm/arch/imx-regs.h>
+
+#ifndef CONFIG_IMX_SERIAL_NONE
+
+#if defined CONFIG_IMX_SERIAL1
+#define UART_BASE IMX_UART1_BASE
+#elif defined CONFIG_IMX_SERIAL2
+#define UART_BASE IMX_UART2_BASE
+#else
+#error "define CONFIG_IMX_SERIAL1, CONFIG_IMX_SERIAL2 or CONFIG_IMX_SERIAL_NONE"
+#endif
+
+struct imx_serial {
+ volatile uint32_t urxd[16];
+ volatile uint32_t utxd[16];
+ volatile uint32_t ucr1;
+ volatile uint32_t ucr2;
+ volatile uint32_t ucr3;
+ volatile uint32_t ucr4;
+ volatile uint32_t ufcr;
+ volatile uint32_t usr1;
+ volatile uint32_t usr2;
+ volatile uint32_t uesc;
+ volatile uint32_t utim;
+ volatile uint32_t ubir;
+ volatile uint32_t ubmr;
+ volatile uint32_t ubrc;
+ volatile uint32_t bipr[4];
+ volatile uint32_t bmpr[4];
+ volatile uint32_t uts;
+};
+
+void serial_setbrg (void)
+{
+ serial_init();
+}
+
+extern void imx_gpio_mode(int gpio_mode);
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+ volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+#ifdef CONFIG_IMX_SERIAL1
+ imx_gpio_mode(PC11_PF_UART1_TXD);
+ imx_gpio_mode(PC12_PF_UART1_RXD);
+#else
+ imx_gpio_mode(PB30_PF_UART2_TXD);
+ imx_gpio_mode(PB31_PF_UART2_RXD);
+#endif
+
+ /* Disable UART */
+ base->ucr1 &= ~UCR1_UARTEN;
+
+ /* Set to default POR state */
+
+ base->ucr1 = 0x00000004;
+ base->ucr2 = 0x00000000;
+ base->ucr3 = 0x00000000;
+ base->ucr4 = 0x00008040;
+ base->uesc = 0x0000002B;
+ base->utim = 0x00000000;
+ base->ubir = 0x00000000;
+ base->ubmr = 0x00000000;
+ base->uts = 0x00000000;
+ /* Set clocks */
+ base->ucr4 |= UCR4_REF16;
+
+ /* Configure FIFOs */
+ base->ufcr = 0xa81;
+
+ /* Set the numerator value minus one of the BRM ratio */
+ base->ubir = (CONFIG_BAUDRATE / 100) - 1;
+
+ /* Set the denominator value minus one of the BRM ratio */
+ base->ubmr = 10000 - 1;
+
+ /* Set to 8N1 */
+ base->ucr2 &= ~UCR2_PREN;
+ base->ucr2 |= UCR2_WS;
+ base->ucr2 &= ~UCR2_STPB;
+
+ /* Ignore RTS */
+ base->ucr2 |= UCR2_IRTS;
+
+ /* Enable UART */
+ base->ucr1 |= UCR1_UARTEN | UCR1_UARTCLKEN;
+
+ /* Enable FIFOs */
+ base->ucr2 |= UCR2_SRST | UCR2_RXEN | UCR2_TXEN;
+
+ /* Clear status flags */
+ base->usr2 |= USR2_ADET |
+ USR2_DTRF |
+ USR2_IDLE |
+ USR2_IRINT |
+ USR2_WAKE |
+ USR2_RTSF |
+ USR2_BRCD |
+ USR2_ORE |
+ USR2_RDR;
+
+ /* Clear status flags */
+ base->usr1 |= USR1_PARITYERR |
+ USR1_RTSD |
+ USR1_ESCF |
+ USR1_FRAMERR |
+ USR1_AIRINT |
+ USR1_AWAKE;
+ return (0);
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is successful, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+ volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+ unsigned char ch;
+
+ while(base->uts & UTS_RXEMPTY);
+
+ ch = (char)base->urxd[0];
+
+ return ch;
+}
+
+#ifdef CONFIG_HWFLOW
+static int hwflow = 0; /* turned off by default */
+int hwflow_onoff(int on)
+{
+}
+#endif
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+ volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+
+ /* Wait for Tx FIFO not full */
+ while (base->uts & UTS_TXFULL);
+
+ base->utxd[0] = c;
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ serial_putc ('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc (void)
+{
+ volatile struct imx_serial* base = (struct imx_serial *)UART_BASE;
+
+ /* If receive fifo is empty, return false */
+ if (base->uts & UTS_RXEMPTY)
+ return 0;
+ return 1;
+}
+
+void
+serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+#endif /* CONFIG_IMX_SERIAL_NONE */
+#endif /* defined CONFIG_IMX */
diff --git a/include/asm-arm/arch-arm920t/imx-regs.h b/include/asm-arm/arch-arm920t/imx-regs.h
new file mode 100644
index 00000000000..1486b74c2a3
--- /dev/null
+++ b/include/asm-arm/arch-arm920t/imx-regs.h
@@ -0,0 +1,571 @@
+#ifndef _IMX_REGS_H
+#define _IMX_REGS_H
+/* ------------------------------------------------------------------------
+ * Motorola IMX system registers
+ * ------------------------------------------------------------------------
+ *
+ */
+
+# ifndef __ASSEMBLY__
+# define __REG(x) (*((volatile u32 *)(x)))
+# define __REG2(x,y) \
+ ( __builtin_constant_p(y) ? (__REG((x) + (y))) \
+ : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
+# else
+# define __REG(x) (x)
+# define __REG2(x,y) ((x)+(y))
+#endif
+
+#define IMX_IO_BASE 0x00200000
+
+/*
+ * Register BASEs, based on OFFSETs
+ *
+ */
+#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE)
+#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE)
+#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE)
+#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE)
+#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE)
+#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE)
+#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE)
+#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE)
+#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE)
+#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE)
+#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE)
+#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE)
+#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE)
+#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE)
+#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE)
+#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE)
+#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE)
+#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE)
+#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE)
+#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE)
+#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE)
+#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE)
+#define IMX_SYSCTRL_BASE (0x1B800 + IMX_IO_BASE)
+#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE)
+#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE)
+#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE)
+#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE)
+#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE)
+#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE)
+
+/* SYSCTRL Registers */
+#define SIDR __REG(IMX_SYSCTRL_BASE + 0x4) /* Silicon ID Register */
+#define FMCR __REG(IMX_SYSCTRL_BASE + 0x8) /* Function Multiplex Control Register */
+#define GPCR __REG(IMX_SYSCTRL_BASE + 0xC) /* Function Multiplex Control Register */
+
+/* Chip Select Registers */
+#define CS0U __REG(IMX_EIM_BASE) /* Chip Select 0 Upper Register */
+#define CS0L __REG(IMX_EIM_BASE + 0x4) /* Chip Select 0 Lower Register */
+#define CS1U __REG(IMX_EIM_BASE + 0x8) /* Chip Select 1 Upper Register */
+#define CS1L __REG(IMX_EIM_BASE + 0xc) /* Chip Select 1 Lower Register */
+#define CS2U __REG(IMX_EIM_BASE + 0x10) /* Chip Select 2 Upper Register */
+#define CS2L __REG(IMX_EIM_BASE + 0x14) /* Chip Select 2 Lower Register */
+#define CS3U __REG(IMX_EIM_BASE + 0x18) /* Chip Select 3 Upper Register */
+#define CS3L __REG(IMX_EIM_BASE + 0x1c) /* Chip Select 3 Lower Register */
+#define CS4U __REG(IMX_EIM_BASE + 0x20) /* Chip Select 4 Upper Register */
+#define CS4L __REG(IMX_EIM_BASE + 0x24) /* Chip Select 4 Lower Register */
+#define CS5U __REG(IMX_EIM_BASE + 0x28) /* Chip Select 5 Upper Register */
+#define CS5L __REG(IMX_EIM_BASE + 0x2c) /* Chip Select 5 Lower Register */
+#define EIM __REG(IMX_EIM_BASE + 0x30) /* EIM Configuration Register */
+
+/* SDRAM controller registers */
+
+#define SDCTL0 __REG(IMX_SDRAMC_BASE) /* SDRAM 0 Control Register */
+#define SDCTL1 __REG(IMX_SDRAMC_BASE + 0x4) /* SDRAM 1 Control Register */
+#define SDMISC __REG(IMX_SDRAMC_BASE + 0x14) /* Miscellaneous Register */
+#define SDRST __REG(IMX_SDRAMC_BASE + 0x18) /* SDRAM Reset Register */
+
+/* PLL registers */
+#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */
+#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */
+#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */
+#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */
+#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
+#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
+
+#define CSCR_MPLL_RESTART (1<<21)
+
+/*
+ * GPIO Module and I/O Multiplexer
+ * x = 0..3 for reg_A, reg_B, reg_C, reg_D
+ */
+#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
+#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
+#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
+#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
+#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
+#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
+#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
+#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
+#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
+#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
+#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
+#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
+#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
+#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
+#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
+#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
+#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
+
+#define GPIO_PIN_MASK 0x1f
+#define GPIO_PORT_MASK (0x3 << 5)
+
+#define GPIO_PORTA (0<<5)
+#define GPIO_PORTB (1<<5)
+#define GPIO_PORTC (2<<5)
+#define GPIO_PORTD (3<<5)
+
+#define GPIO_OUT (1<<7)
+#define GPIO_IN (0<<7)
+#define GPIO_PUEN (1<<8)
+
+#define GPIO_PF (0<<9)
+#define GPIO_AF (1<<9)
+
+#define GPIO_OCR_MASK (3<<10)
+#define GPIO_AIN (0<<10)
+#define GPIO_BIN (1<<10)
+#define GPIO_CIN (2<<10)
+#define GPIO_GPIO (3<<10)
+
+#define GPIO_AOUT (1<<12)
+#define GPIO_BOUT (1<<13)
+
+/* assignements for GPIO alternate/primary functions */
+
+/* FIXME: This list is not completed. The correct directions are
+ * missing on some (many) pins
+ */
+#define PA0_PF_A24 ( GPIO_PORTA | GPIO_PF | 0 )
+#define PA0_AIN_SPI2_CLK ( GPIO_PORTA | GPIO_OUT | GPIO_AIN | 0 )
+#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 )
+#define PA1_AOUT_SPI2_RXD ( GPIO_PORTA | GPIO_IN | GPIO_AOUT | 1 )
+#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 )
+#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
+#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 )
+#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 )
+#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 )
+#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 )
+#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 )
+#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 )
+#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 )
+#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 )
+#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 )
+#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 )
+#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 )
+#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 )
+#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
+#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
+#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
+#define PA17_AIN_SPI2_SS ( GPIO_PORTA | GPIO_AIN | 17 )
+#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
+#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
+#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
+#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 )
+#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 )
+#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 )
+#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 )
+#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
+#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 )
+#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
+#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 )
+#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
+#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 )
+#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
+#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 )
+#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
+#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 )
+#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
+#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 )
+#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
+#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 )
+#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 )
+#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
+#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 )
+#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 )
+#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 )
+#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 )
+#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 )
+#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 11 )
+#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 )
+#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | GPIO_OUT | 12 )
+#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 )
+#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_OUT | GPIO_PUEN | 13 )
+#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 )
+#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 )
+#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 )
+#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
+#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
+#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 )
+#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 )
+#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 )
+#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 )
+#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 )
+#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 )
+#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 )
+#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 )
+#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 )
+#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 )
+#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
+#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
+#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
+#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
+#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 )
+#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 )
+#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
+#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
+#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 )
+#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 )
+#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
+#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
+#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
+#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
+#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
+#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 )
+#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 )
+#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 )
+#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 )
+#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
+#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 )
+#define PD7_AF_UART2_DTR ( GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
+#define PD7_AIN_SPI2_SCLK ( GPIO_PORTD | GPIO_AIN | 7 )
+#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 )
+#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
+#define PD8_AIN_SPI2_SS ( GPIO_PORTD | GPIO_AIN | 8 )
+#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 )
+#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
+#define PD9_AOUT_SPI2_RXD ( GPIO_PORTD | GPIO_IN | GPIO_AOUT | 9 )
+#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
+#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
+#define PD10_AIN_SPI2_TXD ( GPIO_PORTD | GPIO_OUT | GPIO_AIN | 10 )
+#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
+#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
+#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
+#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
+#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
+#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
+#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
+#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
+#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
+#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
+#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
+#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
+#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
+#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
+#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
+#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
+#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
+#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
+#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
+#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
+#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 )
+#define PD31_BIN_SPI2_TXD ( GPIO_PORTD | GPIO_BIN | 31 )
+
+/*
+ * DMA Controller
+ */
+#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */
+#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */
+#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */
+#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */
+#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */
+#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */
+#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */
+#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */
+#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */
+#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */
+#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */
+#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */
+#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */
+#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */
+#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */
+#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */
+#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */
+#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */
+#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */
+#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */
+#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */
+#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */
+
+/* TODO: define DMA_REQ lines */
+
+#define DCR_DRST (1<<1)
+#define DCR_DEN (1<<0)
+#define DBTOCR_EN (1<<15)
+#define DBTOCR_CNT(x) ((x) & 0x7fff )
+#define CNTR_CNT(x) ((x) & 0xffffff )
+#define CCR_DMOD_LINEAR ( 0x0 << 12 )
+#define CCR_DMOD_2D ( 0x1 << 12 )
+#define CCR_DMOD_FIFO ( 0x2 << 12 )
+#define CCR_DMOD_EOBFIFO ( 0x3 << 12 )
+#define CCR_SMOD_LINEAR ( 0x0 << 10 )
+#define CCR_SMOD_2D ( 0x1 << 10 )
+#define CCR_SMOD_FIFO ( 0x2 << 10 )
+#define CCR_SMOD_EOBFIFO ( 0x3 << 10 )
+#define CCR_MDIR_DEC (1<<9)
+#define CCR_MSEL_B (1<<8)
+#define CCR_DSIZ_32 ( 0x0 << 6 )
+#define CCR_DSIZ_8 ( 0x1 << 6 )
+#define CCR_DSIZ_16 ( 0x2 << 6 )
+#define CCR_SSIZ_32 ( 0x0 << 4 )
+#define CCR_SSIZ_8 ( 0x1 << 4 )
+#define CCR_SSIZ_16 ( 0x2 << 4 )
+#define CCR_REN (1<<3)
+#define CCR_RPT (1<<2)
+#define CCR_FRC (1<<1)
+#define CCR_CEN (1<<0)
+#define RTOR_EN (1<<15)
+#define RTOR_CLK (1<<14)
+#define RTOR_PSC (1<<13)
+
+/*
+ * LCD Controller
+ */
+
+#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00)
+
+#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04)
+#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
+#define SIZE_YMAX(y) ( (y) & 0x1ff )
+
+#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08)
+#define VPW_VPW(x) ( (x) & 0x3ff )
+
+#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C)
+#define CPOS_CC1 (1<<31)
+#define CPOS_CC0 (1<<30)
+#define CPOS_OP (1<<28)
+#define CPOS_CXP(x) (((x) & 3ff) << 16)
+#define CPOS_CYP(y) ((y) & 0x1ff)
+
+#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10)
+#define LCWHB_BK_EN (1<<31)
+#define LCWHB_CW(w) (((w) & 0x1f) << 24)
+#define LCWHB_CH(h) (((h) & 0x1f) << 16)
+#define LCWHB_BD(x) ((x) & 0xff)
+
+#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14)
+#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
+#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
+#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
+
+#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18)
+#define PCR_TFT (1<<31)
+#define PCR_COLOR (1<<30)
+#define PCR_PBSIZ_1 (0<<28)
+#define PCR_PBSIZ_2 (1<<28)
+#define PCR_PBSIZ_4 (2<<28)
+#define PCR_PBSIZ_8 (3<<28)
+#define PCR_BPIX_1 (0<<25)
+#define PCR_BPIX_2 (1<<25)
+#define PCR_BPIX_4 (2<<25)
+#define PCR_BPIX_8 (3<<25)
+#define PCR_BPIX_12 (4<<25)
+#define PCR_BPIX_16 (4<<25)
+#define PCR_PIXPOL (1<<24)
+#define PCR_FLMPOL (1<<23)
+#define PCR_LPPOL (1<<22)
+#define PCR_CLKPOL (1<<21)
+#define PCR_OEPOL (1<<20)
+#define PCR_SCLKIDLE (1<<19)
+#define PCR_END_SEL (1<<18)
+#define PCR_END_BYTE_SWAP (1<<17)
+#define PCR_REV_VS (1<<16)
+#define PCR_ACD_SEL (1<<15)
+#define PCR_ACD(x) (((x) & 0x7f) << 8)
+#define PCR_SCLK_SEL (1<<7)
+#define PCR_SHARP (1<<6)
+#define PCR_PCD(x) ((x) & 0x3f)
+
+#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C)
+#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26)
+#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
+#define HCR_H_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20)
+#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26)
+#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
+#define VCR_V_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_POS __REG(IMX_LCDC_BASE+0x24)
+#define POS_POS(x) ((x) & 1f)
+
+#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28)
+#define LSCR1_GRAY1(x) (((x) & 0xf) << 4)
+#define LSCR1_GRAY2(x) ((x) & 0xf)
+
+#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C)
+#define PWMR_CLS(x) (((x) & 0x1ff) << 16)
+#define PWMR_LDMSK (1<<15)
+#define PWMR_SCR1 (1<<10)
+#define PWMR_SCR0 (1<<9)
+#define PWMR_CC_EN (1<<8)
+#define PWMR_PW(x) ((x) & 0xff)
+
+#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30)
+#define DMACR_BURST (1<<31)
+#define DMACR_HM(x) (((x) & 0xf) << 16)
+#define DMACR_TM(x) ((x) &0xf)
+
+#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34)
+#define RMCR_LCDC_EN (1<<1)
+#define RMCR_SELF_REF (1<<0)
+
+#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38)
+#define LCDICR_INT_SYN (1<<2)
+#define LCDICR_INT_CON (1)
+
+#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40)
+#define LCDISR_UDR_ERR (1<<3)
+#define LCDISR_ERR_RES (1<<2)
+#define LCDISR_EOF (1<<1)
+#define LCDISR_BOF (1<<0)
+/*
+ * UART Module
+ */
+#define URXD0(x) __REG2( IMX_UART1_BASE + 0x0, ((x) & 1) << 12) /* Receiver Register */
+#define URTX0(x) __REG2( IMX_UART1_BASE + 0x40, ((x) & 1) << 12) /* Transmitter Register */
+#define UCR1(x) __REG2( IMX_UART1_BASE + 0x80, ((x) & 1) << 12) /* Control Register 1 */
+#define UCR2(x) __REG2( IMX_UART1_BASE + 0x84, ((x) & 1) << 12) /* Control Register 2 */
+#define UCR3(x) __REG2( IMX_UART1_BASE + 0x88, ((x) & 1) << 12) /* Control Register 3 */
+#define UCR4(x) __REG2( IMX_UART1_BASE + 0x8c, ((x) & 1) << 12) /* Control Register 4 */
+#define UFCR(x) __REG2( IMX_UART1_BASE + 0x90, ((x) & 1) << 12) /* FIFO Control Register */
+#define USR1(x) __REG2( IMX_UART1_BASE + 0x94, ((x) & 1) << 12) /* Status Register 1 */
+#define USR2(x) __REG2( IMX_UART1_BASE + 0x98, ((x) & 1) << 12) /* Status Register 2 */
+#define UESC(x) __REG2( IMX_UART1_BASE + 0x9c, ((x) & 1) << 12) /* Escape Character Register */
+#define UTIM(x) __REG2( IMX_UART1_BASE + 0xa0, ((x) & 1) << 12) /* Escape Timer Register */
+#define UBIR(x) __REG2( IMX_UART1_BASE + 0xa4, ((x) & 1) << 12) /* BRM Incremental Register */
+#define UBMR(x) __REG2( IMX_UART1_BASE + 0xa8, ((x) & 1) << 12) /* BRM Modulator Register */
+#define UBRC(x) __REG2( IMX_UART1_BASE + 0xac, ((x) & 1) << 12) /* Baud Rate Count Register */
+#define BIPR1(x) __REG2( IMX_UART1_BASE + 0xb0, ((x) & 1) << 12) /* Incremental Preset Register 1 */
+#define BIPR2(x) __REG2( IMX_UART1_BASE + 0xb4, ((x) & 1) << 12) /* Incremental Preset Register 2 */
+#define BIPR3(x) __REG2( IMX_UART1_BASE + 0xb8, ((x) & 1) << 12) /* Incremental Preset Register 3 */
+#define BIPR4(x) __REG2( IMX_UART1_BASE + 0xbc, ((x) & 1) << 12) /* Incremental Preset Register 4 */
+#define BMPR1(x) __REG2( IMX_UART1_BASE + 0xc0, ((x) & 1) << 12) /* BRM Modulator Register 1 */
+#define BMPR2(x) __REG2( IMX_UART1_BASE + 0xc4, ((x) & 1) << 12) /* BRM Modulator Register 2 */
+#define BMPR3(x) __REG2( IMX_UART1_BASE + 0xc8, ((x) & 1) << 12) /* BRM Modulator Register 3 */
+#define BMPR4(x) __REG2( IMX_UART1_BASE + 0xcc, ((x) & 1) << 12) /* BRM Modulator Register 4 */
+#define UTS(x) __REG2( IMX_UART1_BASE + 0xd0, ((x) & 1) << 12) /* UART Test Register */
+
+/* UART Control Register Bit Fields.*/
+#define URXD_CHARRDY (1<<15)
+#define URXD_ERR (1<<14)
+#define URXD_OVRRUN (1<<13)
+#define URXD_FRMERR (1<<12)
+#define URXD_BRK (1<<11)
+#define URXD_PRERR (1<<10)
+#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */
+#define UCR1_ADBR (1<<14) /* Auto detect baud rate */
+#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */
+#define UCR1_IDEN (1<<12) /* Idle condition interrupt */
+#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */
+#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */
+#define UCR1_IREN (1<<7) /* Infrared interface enable */
+#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */
+#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
+#define UCR1_SNDBRK (1<<4) /* Send break */
+#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
+#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
+#define UCR1_DOZE (1<<1) /* Doze */
+#define UCR1_UARTEN (1<<0) /* UART enabled */
+#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */
+#define UCR2_IRTS (1<<14) /* Ignore RTS pin */
+#define UCR2_CTSC (1<<13) /* CTS pin control */
+#define UCR2_CTS (1<<12) /* Clear to send */
+#define UCR2_ESCEN (1<<11) /* Escape enable */
+#define UCR2_PREN (1<<8) /* Parity enable */
+#define UCR2_PROE (1<<7) /* Parity odd/even */
+#define UCR2_STPB (1<<6) /* Stop */
+#define UCR2_WS (1<<5) /* Word size */
+#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */
+#define UCR2_TXEN (1<<2) /* Transmitter enabled */
+#define UCR2_RXEN (1<<1) /* Receiver enabled */
+#define UCR2_SRST (1<<0) /* SW reset */
+#define UCR3_DTREN (1<<13) /* DTR interrupt enable */
+#define UCR3_PARERREN (1<<12) /* Parity enable */
+#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */
+#define UCR3_DSR (1<<10) /* Data set ready */
+#define UCR3_DCD (1<<9) /* Data carrier detect */
+#define UCR3_RI (1<<8) /* Ring indicator */
+#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
+#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
+#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
+#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
+#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
+#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
+#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
+#define UCR3_BPEN (1<<0) /* Preset registers enable */
+#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
+#define UCR4_INVR (1<<9) /* Inverted infrared reception */
+#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */
+#define UCR4_WKEN (1<<7) /* Wake interrupt enable */
+#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */
+#define UCR4_IRSC (1<<5) /* IR special case */
+#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */
+#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */
+#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */
+#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */
+#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */
+#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */
+#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */
+#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */
+#define USR1_RTSS (1<<14) /* RTS pin status */
+#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */
+#define USR1_RTSD (1<<12) /* RTS delta */
+#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
+#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
+#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
+#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
+#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
+#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
+#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */
+#define USR2_ADET (1<<15) /* Auto baud rate detect complete */
+#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */
+#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */
+#define USR2_IDLE (1<<12) /* Idle condition */
+#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */
+#define USR2_WAKE (1<<7) /* Wake */
+#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */
+#define USR2_TXDC (1<<3) /* Transmitter complete */
+#define USR2_BRCD (1<<2) /* Break condition */
+#define USR2_ORE (1<<1) /* Overrun error */
+#define USR2_RDR (1<<0) /* Recv data ready */
+#define UTS_FRCPERR (1<<13) /* Force parity error */
+#define UTS_LOOP (1<<12) /* Loop tx and rx */
+#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */
+#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */
+#define UTS_TXFULL (1<<4) /* TxFIFO full */
+#define UTS_RXFULL (1<<3) /* RxFIFO full */
+#define UTS_SOFTRST (1<<0) /* Software reset */
+
+/* General purpose timers registers */
+#define TCTL1 __REG(IMX_TIM1_BASE)
+#define TPRER1 __REG(IMX_TIM1_BASE + 0x4)
+#define TCMP1 __REG(IMX_TIM1_BASE + 0x8)
+#define TCR1 __REG(IMX_TIM1_BASE + 0xc)
+#define TCN1 __REG(IMX_TIM1_BASE + 0x10)
+#define TSTAT1 __REG(IMX_TIM1_BASE + 0x14)
+#define TCTL2 __REG(IMX_TIM2_BASE)
+#define TPRER2 __REG(IMX_TIM2_BASE + 0x4)
+#define TCMP2 __REG(IMX_TIM2_BASE + 0x8)
+#define TCR2 __REG(IMX_TIM2_BASE + 0xc)
+#define TCN2 __REG(IMX_TIM2_BASE + 0x10)
+#define TSTAT2 __REG(IMX_TIM2_BASE + 0x14)
+
+/* General purpose timers bitfields */
+#define TCTL_SWR (1<<15) /* Software reset */
+#define TCTL_FRR (1<<8) /* Freerun / restart */
+#define TCTL_CAP (3<<6) /* Capture Edge */
+#define TCTL_OM (1<<5) /* output mode */
+#define TCTL_IRQEN (1<<4) /* interrupt enable */
+#define TCTL_CLKSOURCE (7<<1) /* Clock source */
+#define TCTL_TEN (1) /* Timer enable */
+#define TPRER_PRES (0xff) /* Prescale */
+#define TSTAT_CAPT (1<<1) /* Capture event */
+#define TSTAT_COMP (1) /* Compare event */
+
+#endif /* _IMX_REGS_H */
diff --git a/include/common.h b/include/common.h
index 02efba3c7af..48e38b965dd 100644
--- a/include/common.h
+++ b/include/common.h
@@ -126,6 +126,17 @@ typedef void (interrupt_handler_t)(void *);
# endif
#endif
+#ifndef CONFIG_SERIAL_MULTI
+
+#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2) \
+ || defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) \
+ || defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
+
+#define CONFIG_SERIAL_MULTI 1
+
+#endif
+
+#endif /* CONFIG_SERIAL_MULTI */
/*
* General Purpose Utilities
@@ -403,6 +414,15 @@ ulong get_PLLCLK (void);
#if defined CONFIG_INCA_IP
uint incaip_get_cpuclk (void);
#endif
+#if defined(CONFIG_IMX)
+ulong get_systemPLLCLK(void);
+ulong get_FCLK(void);
+ulong get_HCLK(void);
+ulong get_BCLK(void);
+ulong get_PERCLK1(void);
+ulong get_PERCLK2(void);
+ulong get_PERCLK3(void);
+#endif
ulong get_bus_freq (ulong);
#if defined(CONFIG_MPC85xx)
diff --git a/include/commproc.h b/include/commproc.h
index f87620ebf13..83119717a9c 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -74,9 +74,10 @@
#define CPM_I2C_BASE 0x0820
#define CPM_SPI_BASE 0x0840
#define CPM_FEC_BASE 0x0860
-#define CPM_WLKBD_BASE 0x0880
+#define CPM_SERIAL2_BASE 0x0880
#define CPM_SCC_BASE 0x0900
#define CPM_POST_BASE 0x0980
+#define CPM_WLKBD_BASE 0x0a00
#endif
@@ -1041,7 +1042,7 @@ typedef struct scc_enet {
/*** LWMON **********************************************************/
-#if defined(CONFIG_LWMON) && !defined(CONFIG_8xx_CONS_SCC2)
+#if defined(CONFIG_LWMON)
/* Bits in parallel I/O port registers that have to be set/cleared
* to configure the pins for SCC2 use.
*/
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index bb8ce43babf..b1f41a17279 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -43,6 +43,9 @@
* CONFIG_PPCHAMELEON_CLK_25
* CONFIG_PPCHAMELEON_CLK_33
*/
+#if (!defined(CONFIG_PPCHAMELEON_CLK_25) && !defined(CONFIG_PPCHAMELEON_CLK_33))
+#define CONFIG_PPCHAMELEON_CLK_33
+#endif
#if (defined(CONFIG_PPCHAMELEON_CLK_25) && defined(CONFIG_PPCHAMELEON_CLK_33))
#error "* Two external frequencies (SysClk) are defined! *"
@@ -74,11 +77,11 @@
#ifdef CONFIG_PPCHAMELEON_CLK_25
- #define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
+# define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
#elif (defined (CONFIG_PPCHAMELEON_CLK_33))
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+# define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
#else
-#error "* External frequency (SysClk) not defined! *"
+# error "* External frequency (SysClk) not defined! *"
#endif
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 830bf81a451..47f24be5206 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -64,6 +64,7 @@
* Video console
*/
#if 1
+#define CONFIG_VIDEO
#define CONFIG_VIDEO_SED13806
#define CONFIG_VIDEO_SED13806_16BPP
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index d944ed88cdd..a76ec23652b 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -47,11 +47,9 @@
#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/
-#if 1
+#define CONFIG_SERIAL_MULTI 1
#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
-#else
-#define CONFIG_8xx_CONS_SCC2
-#endif
+#define CONFIG_8xx_CONS_SCC2 1 /* Console is on SCC2 */
#define CONFIG_BAUDRATE 115200 /* with watchdog >= 38400 needed */
@@ -151,17 +149,6 @@
#define CFG_CMD_POST_DIAG 0
#endif
-#ifdef CONFIG_8xx_CONS_SCC2 /* Can't use ethernet, then */
-#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~CFG_CMD_NET) | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_IDE | \
- CFG_CMD_BSP | \
- CFG_CMD_BMP | \
- CFG_CMD_POST_DIAG )
-#else
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DHCP | \
@@ -172,7 +159,6 @@
CFG_CMD_BSP | \
CFG_CMD_BMP | \
CFG_CMD_POST_DIAG )
-#endif
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 5cf092af550..df951e2d745 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -16,7 +16,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -25,7 +25,6 @@
* MA 02111-1307 USA
*/
-
#ifndef __CONFIG_H
#define __CONFIG_H
@@ -40,14 +39,19 @@
* (easy to change)
*/
#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_MC9328 1 /* It's a Motorola MC9328 SoC */
-#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */
-
-#define BOARD_LATE_INIT 1
+#define CONFIG_IMX 1 /* It's a Motorola MC9328 SoC */
+#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/*
+ * Select serial console configuration
+ */
+#define CONFIG_IMX_SERIAL1 /* internal uart 1 */
+/* #define _CONFIG_UART2 */ /* internal uart 2 */
+/* #define CONFIG_SILENT_CONSOLE */ /* use this to disable output */
+#define BOARD_LATE_INIT 1
#define USE_920T_MMU 1
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#if 0
#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
@@ -60,6 +64,8 @@
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+
+
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
@@ -67,13 +73,13 @@
*/
#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
#define CS8900_BASE 0x15000300
-#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
/*
* select serial console configuration
*/
-#define CONFIG_UART1 1
+/* #define CONFIG_UART1 */
/* #define CONFIG_UART2 1 */
#define CONFIG_BAUDRATE 115200
@@ -85,24 +91,20 @@
#define CONFIG_COMMANDS \
(CONFIG_CMD_DFL | \
CFG_CMD_CACHE | \
- /*CFG_CMD_NAND |*/ \
- /*CFG_CMD_EEPROM |*/ \
- /*CFG_CMD_I2C |*/ \
- /*CFG_CMD_USB |*/ \
- CFG_CMD_REGINFO | \
+ CFG_CMD_REGINFO | \
CFG_CMD_ELF)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/docbp mem=48M"
+#define CONFIG_BOOTARGS "root=/dev/msdk mem=48M"
#define CONFIG_ETHADDR 08:00:3e:26:0a:5c
-#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.0.22
#define CONFIG_SERVERIP 192.168.0.11
#define CONFIG_BOOTFILE "mx1ads"
-/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */
+#define CONFIG_BOOTCOMMAND "tftp; bootm"
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
@@ -114,10 +116,10 @@
* Miscellaneous configurable options
*/
-#define CFG_HUSH_PARSER 1
+#define CFG_HUSH_PARSER 1
#define CFG_PROMPT_HUSH_PS2 "> "
-#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LONGHELP /* undef to save memory */
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT "MX1ADS$ " /* Monitor Command Prompt */
@@ -125,21 +127,20 @@
#define CFG_PROMPT "MX1ADS=> " /* Monitor Command Prompt */
#endif
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
/* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x09000000 /* memtest works on */
#define CFG_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR 0x08800000 /* default load address */
-
-
-#define CFG_HZ 1000
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#define CFG_LOAD_ADDR 0x08800000 /* default load address */
+/*#define CFG_HZ 1000 */
+#define CFG_HZ 3686400
+#define CFG_CPUSPEED 0x141
/* valid baudrates */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
@@ -159,27 +160,35 @@
* Physical Memory Map
*/
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
+#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */
+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
-#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define CFG_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */
-#define CFG_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */
-#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
-
+#define CFG_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */
+#define CFG_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */
+#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
-
#define CONFIG_SYNCFLASH 1
#define PHYS_FLASH_SIZE 0x01000000
#define CFG_MAX_FLASH_SECT (16)
-#define CFG_ENV_ADDR (CFG_FLASH_BASE+0x00ff0000)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE+0x00ff8000)
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SIZE 0x0f000 /* Total Size of Environment Sector */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x04000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x100000
+
+/*-----------------------------------------------------------------------
+ * Enable passing ATAGS
+ */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+
+#define CONFIG_SYS_CLK_FREQ 16780000
+#define CONFIG_SYSPLL_CLK_FREQ 16000000
+
#endif /* __CONFIG_H */
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
new file mode 100644
index 00000000000..61a3b29612e
--- /dev/null
+++ b/include/configs/mx1fs2.h
@@ -0,0 +1,291 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */
+#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */
+#define CONFIG_MX1FS2 1 /* on a mx1fs2 board */
+#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
+
+/*
+ * Select serial console configuration
+ */
+#undef _CONFIG_UART1 /* internal uart 1 */
+#define _CONFIG_UART2 /* internal uart 2 */
+#undef _CONFIG_UART3 /* internal uart 3 */
+#undef _CONFIG_UART4 /* internal uart 4 */
+#undef CONFIG_SILENT_CONSOLE /* use this to disable output */
+
+/*
+ * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
+ * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
+ * functionality or size of u-boot code.
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ & ~CFG_CMD_LOADS \
+ & ~CFG_CMD_CONSOLE \
+ & ~CFG_CMD_AUTOSCRIPT \
+ & ~CFG_CMD_NET \
+ & ~CFG_CMD_PING \
+ & ~CFG_CMD_DHCP \
+ | CFG_CMD_JFFS2 \
+ )
+
+#include <cmd_confdefs.h>
+
+/*
+ * Boot options. Setting delay to -1 stops autostart count down.
+ */
+#define CONFIG_BOOTDELAY 10
+#define CONFIG_BOOTARGS "root=/dev/mtdblock4 console=ttySMX0,115200n8 rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND "bootm 10080000"
+#define CONFIG_SHOW_BOOT_PROGRESS
+
+/*
+ * General options for u-boot. Modify to save memory foot print
+ */
+#define CFG_LONGHELP /* undef saves memory */
+#define CFG_PROMPT "mx1fs2> " /* prompt string */
+#define CFG_CBSIZE 256 /* console I/O buffer */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size */
+#define CFG_MAXARGS 16 /* max command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* boot args buf size */
+
+#define CFG_MEMTEST_START 0x08100000 /* memtest test area */
+#define CFG_MEMTEST_END 0x08F00000
+
+#undef CFG_CLKS_IN_HZ /* use HZ for freq. display */
+
+#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED 0x141 /* core clock - register value */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_BAUDRATE 115200
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
+#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
+#define CONFIG_INITRD_TAG 1 /* send initrd params */
+#undef CONFIG_VFD /* do not send framebuffer setup */
+
+#define CFG_JFFS_CUSTOM_PART
+/*
+ * Malloc pool need to host env + 128 Kb reserve for other allocations.
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + (128<<10) )
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+#define CONFIG_STACKSIZE (120<<10) /* stack size */
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */
+#endif
+
+/* SDRAM Setup Values
+ * 0x910a8300 Precharge Command CAS 3
+ * 0x910a8200 Precharge Command CAS 2
+ *
+ * 0xa10a8300 AutoRefresh Command CAS 3
+ * 0xa10a8200 Set AutoRefresh Command CAS 2
+ */
+#define PRECHARGE_CMD 0x910a8300
+#define AUTOREFRESH_CMD 0xa10a8300
+
+#define CONFIG_INIT_CRITICAL
+
+#define BUS32BIT_VERSION
+/*
+ * SDRAM Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
+#define MX1FS2_SDRAM_1 0x08000000 /* SDRAM bank #1 */
+#ifdef BUS32BIT_VERSION
+#define MX1FS2_SDRAM_1_SIZE (0x04000000 - 0x100000) /* 64 MB - 1M Framebuffer */
+#else
+#define MX1FS2_SDRAM_1_SIZE (0x01FC0000 - 0x100000) /* 32 MB - 1M Framebuffer */
+#endif
+/*
+ * Flash Controller settings
+ */
+
+#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */
+
+#ifdef BUS32BIT_VERSION
+#define MX1FS2_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */
+#define MX1FS2_FLASH_INTERLEAVE 2 /* ... made of 2 chips */
+#define MX1FS2_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank*/
+#define MX1FS2_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
+#define MX1FS2_JFFS2_PART0_START 0x10200000
+#define MX1FS2_JFFS2_PART0_SIZE 0x00500000
+#define MX1FS2_JFFS2_PART1_START 0x10700000
+#define MX1FS2_JFFS2_PART1_SIZE 0x00900000
+#else
+#define MX1FS2_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
+#define MX1FS2_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
+#define MX1FS2_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank*/
+#define MX1FS2_FLASH_SECT_SIZE 0x00010000 /* size of erase sector */
+#endif
+#define MX1FS2_FLASH_BASE 0x10000000 /* location of flash memory */
+#define MX1FS2_FLASH_UNLOCK 1 /* perform hw unlock first */
+
+/* This should be defined if CFI FLASH device is present. Actually benefit
+ is not so clear to me. In other words we can provide more informations
+ to user, but this expects more complex flash handling we do not provide
+ now.*/
+#undef CFG_FLASH_CFI
+
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* timeout for Erase operation */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* timeout for Write operation */
+
+#define CFG_FLASH_BASE MX1FS2_FLASH_BASE
+
+/*
+ * This is setting for JFFS2 support in u-boot.
+ * Right now there is no gain for user, but later on booting kernel might be
+ * possible. Consider using XIP kernel running from flash to save RAM
+ * footprint.
+ * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ */
+#define CFG_JFFS2_FIRST_BANK 0
+#define CFG_JFFS2_FIRST_SECTOR 5
+#define CFG_JFFS2_NUM_BANKS 1
+
+/*
+ * Environment setup. Definitions of monitor location and size with
+ * definition of environment setup ends up in 2 possibilities.
+ * 1. Embeded environment - in u-boot code is space for environment
+ * 2. Environment is read from predefined sector of flash
+ * Right now we support 2. possiblity, but expecting no env placed
+ * on mentioned address right now. This also needs to provide whole
+ * sector for it - for us 256Kb is really waste of memory. U-boot uses
+ * default env. and until kernel parameters could be sent to kernel
+ * env. has no sense to us.
+ */
+
+#define CFG_MONITOR_BASE 0x10000000
+#define CFG_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0x10020000 /* absolute address for now */
+#define CFG_ENV_SIZE 0x20000
+
+#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */
+
+/* Setup CS4 and CS5 */
+#define CFG_GIUS_A_VAL 0x0003fffe
+
+/*
+ * CSxU_VAL:
+ * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32
+ * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC |
+ *
+ * CSxL_VAL:
+ * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0
+ * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN|
+ */
+
+#define CFG_CS0U_VAL 0x00008C00
+#define CFG_CS0L_VAL 0x22222601
+#define CFG_CS1U_VAL 0x00008C00
+#define CFG_CS1L_VAL 0x22222301
+#define CFG_CS4U_VAL 0x00008C00
+#define CFG_CS4L_VAL 0x22222301
+#define CFG_CS5U_VAL 0x00008C00
+#define CFG_CS5L_VAL 0x22222301
+
+/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
+ f_ref=16,777MHz
+
+ 0x002a141f: 191,9944MHz
+ 0x040b2007: 144MHz
+ 0x042a141f: 96MHz
+ 0x0811140d: 64MHz
+ 0x040e200e: 150MHz
+ 0x00321431: 200MHz
+
+ 0x08001800: 64MHz mit 16er Quarz
+ 0x04001800: 96MHz mit 16er Quarz
+ 0x04002400: 144MHz mit 16er Quarz
+
+ 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
+ |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */
+
+#define CFG_MPCTL0_VAL 0x07E723AD
+#define CFG_MPCTL1_VAL 0x00000040
+#define CFG_PCDR_VAL 0x00010005
+#define CFG_GPCR_VAL 0x00000FFB
+
+#define USE_16M_OSZI /* If you have one, you want to use it
+ The internal 32kHz oszillator jitters */
+#ifdef USE_16M_OSZI
+
+#define CFG_SPCTL0_VAL 0x04001401
+#define CFG_SPCTL1_VAL 0x0C000040
+#define CFG_CSCR_VAL 0x07030003
+#define CONFIG_SYS_CLK_FREQ 16780000
+#define CONFIG_SYSPLL_CLK_FREQ 16000000
+
+#else
+
+#define CFG_SPCTL0_VAL 0x07E716D1
+#define CFG_CSCR_VAL 0x06000003
+#define CONFIG_SYS_CLK_FREQ 16780000
+#define CONFIG_SYSPLL_CLK_FREQ 16780000
+
+#endif
+
+/*
+ * Well this has to be defined, but on the other hand it is used differently
+ * one may expect. For instance loadb command do not cares :-)
+ * So advice is - do not relay on this...
+ */
+#define CFG_LOAD_ADDR 0x08400000
+
+#define CFG_FMCR_VAL 0x00000003 /* Reset Default */
+
+/* Bit[0:3] contain PERCLK1DIV for UART 1
+ 0x000b00b ->b<- -> 192MHz/12=16MHz
+ 0x000b00b ->8<- -> 144MHz/09=16MHz
+ 0x000b00b ->3<- -> 64MHz/4=16MHz */
+
+#ifdef _CONFIG_UART1
+#define CONFIG_IMX_SERIAL1
+#elif defined _CONFIG_UART2
+#define CONFIG_IMX_SERIAL2
+#elif defined _CONFIG_UART3 | defined _CONFIG_UART4
+#define CONFIG_IMX_SERIAL_NONE
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_CLK 3686400
+#define CFG_NS16550_REG_SIZE 1
+#define CONFIG_CONS_INDEX 1
+#ifdef _CONFIG_UART3
+#define CFG_NS16550_COM1 0x15000000
+#elif defined _CONFIG_UART4
+#define CFG_NS16550_COM1 0x16000000
+#endif
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
new file mode 100644
index 00000000000..6cd91269d43
--- /dev/null
+++ b/include/configs/scb9328.h
@@ -0,0 +1,357 @@
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ * 2003/13/06 Initial MP10 Support copied from wepep250
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */
+#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */
+#define CONFIG_SCB9328 1 /* on a scb9328tronix board */
+#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
+
+#define CONFIG_IMX_SERIAL1
+/*
+ * Select serial console configuration
+ */
+
+
+/*
+ * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
+ * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
+ * functionality or size of u-boot code.
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ & ~CFG_CMD_LOADS \
+ & ~CFG_CMD_CONSOLE \
+ & ~CFG_CMD_AUTOSCRIPT \
+ | CFG_CMD_NET \
+ | CFG_CMD_PING \
+ | CFG_CMD_DHCP \
+ )
+
+#include <cmd_confdefs.h>
+
+/*
+ * Boot options. Setting delay to -1 stops autostart count down.
+ * NOTE: Sending parameters to kernel depends on kernel version and
+ * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
+ * parameters at all! Do not get confused by them so.
+ */
+#define CONFIG_BOOTDELAY -1
+#define CONFIG_BOOTARGS "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328"
+#define CONFIG_BOOTCOMMAND "bootm 10040000"
+#define CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_ETHADDR 80:81:82:83:84:85
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 10.10.10.9
+#define CONFIG_SERVERIP 10.10.10.10
+
+/*
+ * General options for u-boot. Modify to save memory foot print
+ */
+#define CFG_LONGHELP /* undef saves memory */
+#define CFG_PROMPT "scb9328> " /* prompt string */
+#define CFG_CBSIZE 256 /* console I/O buffer */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size */
+#define CFG_MAXARGS 16 /* max command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* boot args buf size */
+
+#define CFG_MEMTEST_START 0x08100000 /* memtest test area */
+#define CFG_MEMTEST_END 0x08F00000
+
+#undef CFG_CLKS_IN_HZ /* use HZ for freq. display */
+
+#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED 0x141 /* core clock - register value */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_BAUDRATE 115200
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
+#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
+#define CONFIG_INITRD_TAG 1 /* send initrd params */
+#undef CONFIG_VFD /* do not send framebuffer setup */
+
+
+/*
+ * Malloc pool need to host env + 128 Kb reserve for other allocations.
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + (128<<10) )
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+#define CONFIG_STACKSIZE (120<<10) /* stack size */
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */
+#endif
+
+/* SDRAM Setup Values
+0x910a8300 Precharge Command CAS 3
+0x910a8200 Precharge Command CAS 2
+
+0xa10a8300 AutoRefresh Command CAS 3
+0xa10a8200 Set AutoRefresh Command CAS 2 */
+
+#define PRECHARGE_CMD 0x910a8200
+#define AUTOREFRESH_CMD 0xa10a8200
+#define CONFIG_INIT_CRITICAL
+
+/*
+ * SDRAM Memory Map
+ */
+/* SH FIXME */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
+#define SCB9328_SDRAM_1 0x08000000 /* SDRAM bank #1 */
+#define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */
+
+/*
+ * Flash Controller settings
+ */
+
+/*
+ * Hardware drivers
+ */
+
+
+/*
+ * Configuration for FLASH memory for the Synertronixx board
+ */
+
+/* #define SCB9328_FLASH_32M */
+
+/* 32MB */
+#ifdef SCB9328_FLASH_32M
+#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */
+#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
+#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
+#define SCB9328_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank */
+#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
+#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */
+#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */
+#else
+
+/* 16MB */
+#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */
+#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
+#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
+#define SCB9328_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank */
+#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
+#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */
+#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */
+#endif /* SCB9328_FLASH_32M */
+
+/* This should be defined if CFI FLASH device is present. Actually benefit
+ is not so clear to me. In other words we can provide more informations
+ to user, but this expects more complex flash handling we do not provide
+ now.*/
+#undef CFG_FLASH_CFI
+
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* timeout for Erase operation */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* timeout for Write operation */
+
+#define CFG_FLASH_BASE SCB9328_FLASH_BASE
+
+/*
+ * This is setting for JFFS2 support in u-boot.
+ * Right now there is no gain for user, but later on booting kernel might be
+ * possible. Consider using XIP kernel running from flash to save RAM
+ * footprint.
+ * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ */
+#define CFG_JFFS2_FIRST_BANK 0
+#define CFG_JFFS2_FIRST_SECTOR 5
+#define CFG_JFFS2_NUM_BANKS 1
+
+/*
+ * Environment setup. Definitions of monitor location and size with
+ * definition of environment setup ends up in 2 possibilities.
+ * 1. Embeded environment - in u-boot code is space for environment
+ * 2. Environment is read from predefined sector of flash
+ * Right now we support 2. possiblity, but expecting no env placed
+ * on mentioned address right now. This also needs to provide whole
+ * sector for it - for us 256Kb is really waste of memory. U-boot uses
+ * default env. and until kernel parameters could be sent to kernel
+ * env. has no sense to us.
+ */
+
+/* Setup for PA23 which is Reset Default PA23 but has to become
+ CS5 */
+
+#define CFG_GPR_A_VAL 0x00800000
+#define CFG_GIUS_A_VAL 0x0043fffe
+
+#define CFG_MONITOR_BASE 0x10000000
+#define CFG_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0x10020000 /* absolute address for now */
+#define CFG_ENV_SIZE 0x20000
+
+#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */
+
+/*
+ * CSxU_VAL:
+ * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32
+ * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC |
+ *
+ * CSxL_VAL:
+ * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0
+ * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN|
+ */
+
+#define CFG_CS0U_VAL 0x000F2000
+#define CFG_CS0L_VAL 0x11110d01
+#define CFG_CS1U_VAL 0x000F0a00
+#define CFG_CS1L_VAL 0x11110601
+#define CFG_CS2U_VAL 0x0
+#define CFG_CS2L_VAL 0x0
+
+#define CFG_CS3U_VAL 0x000FFFFF
+#define CFG_CS3L_VAL 0x00000303
+
+#define CFG_CS4U_VAL 0x000F0a00
+#define CFG_CS4L_VAL 0x11110301
+
+/* CNC == 3 too long
+ #define CFG_CS5U_VAL 0x0000C210 */
+
+/* #define CFG_CS5U_VAL 0x00008400
+ mal laenger mahcen, ob der bei 150MHz laenger haelt dann und
+ kaum langsamer ist */
+/* #define CFG_CS5U_VAL 0x00009400
+ #define CFG_CS5L_VAL 0x11010D03 */
+
+#define CFG_CS5U_VAL 0x00008400
+#define CFG_CS5L_VAL 0x00000D03
+
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DM9000_BASE 0x16000000
+#define DM9000_IO CONFIG_DM9000_BASE
+#define DM9000_DATA (CONFIG_DM9000_BASE+4)
+/* #define CONFIG_DM9000_USE_8BIT */
+#define CONFIG_DM9000_USE_16BIT
+/* #define CONFIG_DM9000_USE_32BIT */
+
+/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
+ f_ref=16,777MHz
+
+ 0x002a141f: 191,9944MHz
+ 0x040b2007: 144MHz
+ 0x042a141f: 96MHz
+ 0x0811140d: 64MHz
+ 0x040e200e: 150MHz
+ 0x00321431: 200MHz
+
+ 0x08001800: 64MHz mit 16er Quarz
+ 0x04001800: 96MHz mit 16er Quarz
+ 0x04002400: 144MHz mit 16er Quarz
+
+ 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
+ |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */
+
+#define CPU200
+
+#ifdef CPU200
+#define CFG_MPCTL0_VAL 0x00321431
+#else
+#define CFG_MPCTL0_VAL 0x040e200e
+#endif
+
+/* #define BUS64 */
+#define BUS72
+
+#ifdef BUS72
+#define CFG_SPCTL0_VAL 0x04002400
+#endif
+
+#ifdef BUS96
+#define CFG_SPCTL0_VAL 0x04001800
+#endif
+
+#ifdef BUS64
+#define CFG_SPCTL0_VAL 0x08001800
+#endif
+
+/* Das ist der BCLK Divider, der aus der System PLL
+ BCLK und HCLK erzeugt:
+ 31 | xxxx xxxx xxxx xxxx xx10 11xx xxxx xxxx | 0
+ 0x2f008403 : 192MHz/2=96MHz, 144MHz/2=72MHz PRESC=1->BCLKDIV=2
+ 0x2f008803 : 192MHz/3=64MHz, 240MHz/3=80MHz PRESC=1->BCLKDIV=2
+ 0x2f001003 : 192MHz/5=38,4MHz
+ 0x2f000003 : 64MHz/1
+ Bit 22: SPLL Restart
+ Bit 21: MPLL Restart */
+
+#ifdef BUS64
+#define CFG_CSCR_VAL 0x2f030003
+#endif
+
+#ifdef BUS72
+#define CFG_CSCR_VAL 0x2f030403
+#endif
+
+/*
+ * Well this has to be defined, but on the other hand it is used differently
+ * one may expect. For instance loadb command do not cares :-)
+ * So advice is - do not relay on this...
+ */
+#define CFG_LOAD_ADDR 0x08400000
+
+#define MHZ16QUARZINUSE
+
+#ifdef MHZ16QUARZINUSE
+#define CONFIG_SYSPLL_CLK_FREQ 16000000
+#else
+#define CONFIG_SYSPLL_CLK_FREQ 16780000
+#endif
+
+#define CONFIG_SYS_CLK_FREQ 16780000
+
+/* FMCR Bit 0 becomes 0 to make CS3 CS3 :P */
+#define CFG_FMCR_VAL 0x00000001
+
+/* Bit[0:3] contain PERCLK1DIV for UART 1
+ 0x000b00b ->b<- -> 192MHz/12=16MHz
+ 0x000b00b ->8<- -> 144MHz/09=16MHz
+ 0x000b00b ->3<- -> 64MHz/4=16MHz */
+
+#ifdef BUS96
+#define CFG_PCDR_VAL 0x000b00b5
+#endif
+
+#ifdef BUS64
+#define CFG_PCDR_VAL 0x000b00b3
+#endif
+
+#ifdef BUS72
+#define CFG_PCDR_VAL 0x000b00b8
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/devices.h b/include/devices.h
index 9f2a0c34acc..09c2c5f511f 100644
--- a/include/devices.h
+++ b/include/devices.h
@@ -39,7 +39,7 @@
typedef struct {
int flags; /* Device flags: input/output/system */
int ext; /* Supported extensions */
- char name[8]; /* Device name */
+ char name[16]; /* Device name */
/* GENERAL functions */
diff --git a/include/mc9328.h b/include/mc9328.h
deleted file mode 100644
index 2a6e7577fb3..00000000000
--- a/include/mc9328.h
+++ /dev/null
@@ -1,1051 +0,0 @@
-/*
- * include/mc9328.h
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __MC9328_H__
-#define __MC9328_H__
-
-typedef volatile unsigned long VU32;
-typedef VU32 * P_VU32;
-
-#define __REG(x) (*((volatile u32 *)(x)))
-
-/*
- * MX1 Chip selects & internal memory's
- */
-#define MX1_DMI_PHYS 0x00000000 /* double map image */
-#define MX1_BROM_PHYS 0x00100000 /* Bootstrape ROM */
-#define MX1_ESRAM_PHYS 0x00300000 /* Embedded SRAM (128KB)*/
-
-#define MX1_CSD0_PHYS 0x08000000 /* CSD0 64MB (SDRAM) */
-#define MX1_CSD1_PHYS 0x0C000000 /* CSD1 64MB (SDRAM) */
-#define MX1_CS0_PHYS 0x10000000 /* CS0 32MB (Flash) */
-#define MX1_CS1_PHYS 0x12000000 /* CS1 16MB (Flash) */
-#define MX1_CS2_PHYS 0x13000000 /* CS2 16MB (Ext SRAM) */
-#define MX1_CS3_PHYS 0x14000000 /* CS3 16MB (Spare) */
-#define MX1_CS4_PHYS 0x15000000 /* CS4 16MB (Spare) */
-#define MX1_CS5_PHYS 0x16000000 /* CS5 16MB (Spare) */
-
-/*
- * MX1 Watchdog registers
- */
-#define MX1_WCR __REG(0x00201000) /* Watchdog Control Register */
-#define MX1_WSR __REG(0x00201004) /* Watchdog Service Register */
-#define MX1_WSTR __REG(0x00201008) /* Watchdog Status Register */
-
-/*
- * MX1 Timer registers
- */
-#define MX1_TCTL1 __REG(0x00202000) /* Timer 1 Control Register */
-#define MX1_TPRER1 __REG(0x00202004) /* Timer 1 Prescaler Register */
-#define MX1_TCMP1 __REG(0x00202008) /* Timer 1 Compare Register */
-#define MX1_TCR1 __REG(0x0020200C) /* Timer 1 Capture Register */
-#define MX1_TCN1 __REG(0x00202010) /* Timer 1 Counter Register */
-#define MX1_TSTAT1 __REG(0x00202014) /* Timer 1 Status Register */
-
-#define MX1_TCTL2 __REG(0x00203000) /* Timer 2 Control Register */
-#define MX1_TPRER2 __REG(0x00203004) /* Timer 2 Prescaler Register */
-#define MX1_TCMP2 __REG(0x00203008) /* Timer 2 Compare Register */
-#define MX1_TCR2 __REG(0x0020300C) /* Timer 2 Capture Register */
-#define MX1_TCN2 __REG(0x00203010) /* Timer 2 Counter Register */
-#define MX1_TSTAT2 __REG(0x00203014) /* Timer 2 Status Register */
-
-/*
- * MX1 RTC registers
- */
-#define MX1_HOURMIN __REG(0x00204000) /* RTC Hour & Min Counter Registers */
-#define MX1_SECONDS __REG(0x00204004) /* RTC Seconds Counter Registers */
-#define MX1_ALRM_HM __REG(0x00204008) /* RTC Hour & Min Alarm Registers */
-#define MX1_ALRM_SEC __REG(0x0020400C) /* RTC Seconds Alarm Registers */
-#define MX1_RCCTL __REG(0x00204010) /* RTC Control Registers */
-#define MX1_RTCISR __REG(0x00204014) /* RTC Interrupt Status Registers */
-#define MX1_RTCIENR __REG(0x00204018) /* RTC Interrupt Enable Registers */
-#define MX1_STPWCH __REG(0x0020401C) /* RTC Stopwatch Minutes Registers */
-#define MX1_DAYR __REG(0x00204020) /* RTC Days Counter Registers */
-#define MX1_DAYALARM __REG(0x00204020) /* RTC Day Alarm Registers */
-
-/*
- * MX1 LCD Controller registers
- */
-#define MX1_SSA __REG(0x00205000) /* Screen Start Address Register */
-#define MX1_SIZE __REG(0x00205004) /* Size Register */
-#define MX1_VPW __REG(0x00205008) /* Virtual Page Width Register */
-#define MX1_CPOS __REG(0x0020500C) /* LCD Cursor Position Register */
-#define MX1_LCWHB __REG(0x00205010) /* LCD Cursor Width Height & Blink Register */
-#define MX1_LCHCC __REG(0x00205014) /* LCD Color Cursor Mapping Register */
-#define MX1_PCR __REG(0x00205018) /* LCD Panel Configuration Register */
-#define MX1_HCR __REG(0x0020501C) /* Horizontal Configuration Register */
-#define MX1_VCR __REG(0x00205020) /* Vertical Configuration Register */
-#define MX1_POS __REG(0x00205024) /* Panning Offset Register */
-#define MX1_LGPMR __REG(0x00205028) /* LCD Gray Palette Mapping Register */
-#define MX1_PWMR __REG(0x0020502C) /* PWM Contrast Control Register */
-#define MX1_DMACR __REG(0x00205030) /* DMA Control Register */
-#define MX1_RMCR __REG(0x00205034) /* Refresh Mode Control Register */
-#define MX1_LCDICR __REG(0x00205038) /* Interrupt Configuration Register */
-#define MX1_LCDISR __REG(0x00205040) /* Interrupt Status Register */
-
-/*
- * MX1 UART registers
- */
-
-/* UART 1 */
-#define MX1_URX0D_1 __REG(0x00206000) /* UART 1 Receiver Register 0 */
-#define MX1_URX1D_1 __REG(0x00206004) /* UART 1 Receiver Register 1 */
-#define MX1_URX2D_1 __REG(0x00206008) /* UART 1 Receiver Register 2 */
-#define MX1_URX3D_1 __REG(0x0020600C) /* UART 1 Receiver Register 3 */
-#define MX1_URX4D_1 __REG(0x00206010) /* UART 1 Receiver Register 4 */
-#define MX1_URX5D_1 __REG(0x00206014) /* UART 1 Receiver Register 5 */
-#define MX1_URX6D_1 __REG(0x00206018) /* UART 1 Receiver Register 6 */
-#define MX1_URX7D_1 __REG(0x0020601C) /* UART 1 Receiver Register 7 */
-#define MX1_URX8D_1 __REG(0x00206020) /* UART 1 Receiver Register 8 */
-#define MX1_URX9D_1 __REG(0x00206024) /* UART 1 Receiver Register 9 */
-#define MX1_URX10D_1 __REG(0x00206028) /* UART 1 Receiver Register 10 */
-#define MX1_URX11D_1 __REG(0x0020602C) /* UART 1 Receiver Register 11 */
-#define MX1_URX12D_1 __REG(0x00206030) /* UART 1 Receiver Register 12 */
-#define MX1_URX13D_1 __REG(0x00206034) /* UART 1 Receiver Register 13 */
-#define MX1_URX14D_1 __REG(0x00206038) /* UART 1 Receiver Register 14 */
-#define MX1_URX15D_1 __REG(0x0020603c) /* UART 1 Receiver Register 15 */
-
-#define MX1_UTX0D_1 __REG(0x00206040) /* UART 1 Transmitter Register 0 */
-#define MX1_UTX1D_1 __REG(0x00206044) /* UART 1 Transmitter Register 1 */
-#define MX1_UTX2D_1 __REG(0x00206048) /* UART 1 Transmitter Register 2 */
-#define MX1_UTX3D_1 __REG(0x0020604C) /* UART 1 Transmitter Register 3 */
-#define MX1_UTX4D_1 __REG(0x00206050) /* UART 1 Transmitter Register 4 */
-#define MX1_UTX5D_1 __REG(0x00206054) /* UART 1 Transmitter Register 5 */
-#define MX1_UTX6D_1 __REG(0x00206058) /* UART 1 Transmitter Register 6 */
-#define MX1_UTX7D_1 __REG(0x0020605C) /* UART 1 Transmitter Register 7 */
-#define MX1_UTX8D_1 __REG(0x00206060) /* UART 1 Transmitter Register 8 */
-#define MX1_UTX9D_1 __REG(0x00206064) /* UART 1 Transmitter Register 9 */
-#define MX1_UTX10D_1 __REG(0x00206068) /* UART 1 Transmitter Register 10 */
-#define MX1_UTX11D_1 __REG(0x0020606C) /* UART 1 Transmitter Register 11 */
-#define MX1_UTX12D_1 __REG(0x00206060) /* UART 1 Transmitter Register 12 */
-#define MX1_UTX13D_1 __REG(0x00206074) /* UART 1 Transmitter Register 13 */
-#define MX1_UTX14D_1 __REG(0x00206078) /* UART 1 Transmitter Register 14 */
-#define MX1_UTX15D_1 __REG(0x0020607c) /* UART 1 Transmitter Register 15 */
-
-#define MX1_UCR1_1 __REG(0x00206080) /* UART 1 Control Register 1 */
-#define MX1_UCR2_1 __REG(0x00206084) /* UART 1 Control Register 2 */
-#define MX1_UCR3_1 __REG(0x00206088) /* UART 1 Control Register 3 */
-#define MX1_UCR4_1 __REG(0x0020608C) /* UART 1 Control Register 4 */
-#define MX1_UFCR_1 __REG(0x00206090) /* UART 1 FIFO Control Register */
-#define MX1_USR1_1 __REG(0x00206094) /* UART 1 Status Register 1 */
-#define MX1_USR2_1 __REG(0x00206098) /* UART 1 Status Register 2 */
-#define MX1_UESC_1 __REG(0x0020609C) /* UART 1 Escape Character Register */
-#define MX1_UTIM_1 __REG(0x002060A0) /* UART 1 Escape Timer Register */
-#define MX1_UBIR_1 __REG(0x002060A4) /* UART 1 BRM Incremental Register */
-#define MX1_UBMR_1 __REG(0x002060A8) /* UART 1 BRM Modulator Register */
-#define MX1_UBRC_1 __REG(0x002060AC) /* UART 1 Baud Rate Count Register */
-#define MX1_BIPR1_1 __REG(0x002060B0) /* UART 1 BRM Incremental Preset Register 1 */
-#define MX1_BIPR2_1 __REG(0x002060B4) /* UART 1 BRM Incremental Preset Register 2 */
-#define MX1_BIPR3_1 __REG(0x002060B8) /* UART 1 BRM Incremental Preset Register 3 */
-#define MX1_BIPR4_1 __REG(0x002060BC) /* UART 1 BRM Incremental Preset Register 4 */
-#define MX1_BMPR1_1 __REG(0x002060C0) /* UART 1 BRM Modulator Preset Register 1 */
-#define MX1_BMPR2_1 __REG(0x002060C4) /* UART 1 BRM Modulator Preset Register 2 */
-#define MX1_BMPR3_1 __REG(0x002060C8) /* UART 1 BRM Modulator Preset Register 3 */
-#define MX1_BMPR4_1 __REG(0x002060CC) /* UART 1 BRM Modulator Preset Register 4 */
-#define MX1_UTS_1 __REG(0x002060D0) /* UART 1 Test Register 1 */
-
-/* UART 2 */
-#define MX1_URX0D_2 __REG(0x00207000) /* UART 2 Receiver Register 0 */
-#define MX1_URX1D_2 __REG(0x00207004) /* UART 2 Receiver Register 1 */
-#define MX1_URX2D_2 __REG(0x00207008) /* UART 2 Receiver Register 2 */
-#define MX1_URX3D_2 __REG(0x0020700C) /* UART 2 Receiver Register 3 */
-#define MX1_URX4D_2 __REG(0x00207010) /* UART 2 Receiver Register 4 */
-#define MX1_URX5D_2 __REG(0x00207014) /* UART 2 Receiver Register 5 */
-#define MX1_URX6D_2 __REG(0x00207018) /* UART 2 Receiver Register 6 */
-#define MX1_URX7D_2 __REG(0x0020701C) /* UART 2 Receiver Register 7 */
-#define MX1_URX8D_2 __REG(0x00207020) /* UART 2 Receiver Register 8 */
-#define MX1_URX9D_2 __REG(0x00207024) /* UART 2 Receiver Register 9 */
-#define MX1_URX10D_2 __REG(0x00207028) /* UART 2 Receiver Register 10 */
-#define MX1_URX11D_2 __REG(0x0020702C) /* UART 2 Receiver Register 11 */
-#define MX1_URX12D_2 __REG(0x00207030) /* UART 2 Receiver Register 12 */
-#define MX1_URX13D_2 __REG(0x00207034) /* UART 2 Receiver Register 13 */
-#define MX1_URX14D_2 __REG(0x00207038) /* UART 2 Receiver Register 14 */
-#define MX1_URX15D_2 __REG(0x0020703c) /* UART 2 Receiver Register 15 */
-
-#define MX1_UTX0D_2 __REG(0x00207040) /* UART 2 Transmitter Register 0 */
-#define MX1_UTX1D_2 __REG(0x00207044) /* UART 2 Transmitter Register 1 */
-#define MX1_UTX2D_2 __REG(0x00207048) /* UART 2 Transmitter Register 2 */
-#define MX1_UTX3D_2 __REG(0x0020704C) /* UART 2 Transmitter Register 3 */
-#define MX1_UTX4D_2 __REG(0x00207050) /* UART 2 Transmitter Register 4 */
-#define MX1_UTX5D_2 __REG(0x00207054) /* UART 2 Transmitter Register 5 */
-#define MX1_UTX6D_2 __REG(0x00207058) /* UART 2 Transmitter Register 6 */
-#define MX1_UTX7D_2 __REG(0x0020705C) /* UART 2 Transmitter Register 7 */
-#define MX1_UTX8D_2 __REG(0x00207060) /* UART 2 Transmitter Register 8 */
-#define MX1_UTX9D_2 __REG(0x00207064) /* UART 2 Transmitter Register 9 */
-#define MX1_UTX10D_2 __REG(0x00207068) /* UART 2 Transmitter Register 10 */
-#define MX1_UTX11D_2 __REG(0x0020706C) /* UART 2 Transmitter Register 11 */
-#define MX1_UTX12D_2 __REG(0x00207060) /* UART 2 Transmitter Register 12 */
-#define MX1_UTX13D_2 __REG(0x00207074) /* UART 2 Transmitter Register 13 */
-#define MX1_UTX14D_2 __REG(0x00207078) /* UART 2 Transmitter Register 14 */
-#define MX1_UTX15D_2 __REG(0x0020707c) /* UART 2 Transmitter Register 15 */
-
-#define MX1_UCR1_2 __REG(0x00207080) /* UART 2 Control Register 1 */
-#define MX1_UCR2_2 __REG(0x00207084) /* UART 2 Control Register 2 */
-#define MX1_UCR3_2 __REG(0x00207088) /* UART 2 Control Register 3 */
-#define MX1_UCR4_2 __REG(0x0020708C) /* UART 2 Control Register 4 */
-#define MX1_UFCR_2 __REG(0x00207090) /* UART 2 FIFO Control Register */
-#define MX1_USR1_2 __REG(0x00207094) /* UART 2 Status Register 1 */
-#define MX1_USR2_2 __REG(0x00207098) /* UART 2 Status Register 2 */
-#define MX1_UESC_2 __REG(0x0020709C) /* UART 2 Escape Character Register */
-#define MX1_UTIM_2 __REG(0x002070A0) /* UART 2 Escape Timer Register */
-#define MX1_UBIR_2 __REG(0x002070A4) /* UART 2 BRM Incremental Register */
-#define MX1_UBMR_2 __REG(0x002070A8) /* UART 2 BRM Modulator Register */
-#define MX1_UBRC_2 __REG(0x002070AC) /* UART 2 Baud Rate Count Register */
-#define MX1_BIPR1_2 __REG(0x002070B0) /* UART 2 BRM Incremental Preset Register 1 */
-#define MX1_BIPR2_2 __REG(0x002070B4) /* UART 2 BRM Incremental Preset Register 2 */
-#define MX1_BIPR3_2 __REG(0x002070B8) /* UART 2 BRM Incremental Preset Register 3 */
-#define MX1_BIPR4_2 __REG(0x002070BC) /* UART 2 BRM Incremental Preset Register 4 */
-#define MX1_BMPR1_2 __REG(0x002070C0) /* UART 2 BRM Modulator Preset Register 1 */
-#define MX1_BMPR2_2 __REG(0x002070C4) /* UART 2 BRM Modulator Preset Register 2 */
-#define MX1_BMPR3_2 __REG(0x002070C8) /* UART 2 BRM Modulator Preset Register 3 */
-#define MX1_BMPR4_2 __REG(0x002070CC) /* UART 2 BRM Modulator Preset Register 4 */
-#define MX1_UTS_2 __REG(0x002070D0) /* UART 2 Test Register 1 */
-
-/*
- * MX1 PWM registers
- */
-#define MX1_PWMC __REG(0x00208000) /* PWM Control Register */
-#define MX1_PWMS __REG(0x00208004) /* PWM Sample Register */
-#define MX1_PWMP __REG(0x00208008) /* PWM Period Register */
-#define MX1_PWMCNT __REG(0x0020800C) /* PWM Counter Register */
-
-/*
- * MX1 DMAC registers
- */
-#define MX1_DCR __REG(0x00209000) /* DMA Control Register */
-#define MX1_DISR __REG(0x00209004) /* DMA Interrupt Status Register */
-#define MX1_DIMR __REG(0x00209008) /* DMA Interrupt Mask Register */
-#define MX1_DBTOSR __REG(0x0020900C) /* DMA Burst Time-Out Status Register */
-#define MX1_DRTOSR __REG(0x00209010) /* DMA Request Time-Out Status Register */
-#define MX1_DSESR __REG(0x00209014) /* DMA Request Time-Out Status Register */
-#define MX1_DBOSR __REG(0x00209018) /* DMA Buffer Overflow Status Register */
-#define MX1_DBTOCR __REG(0x0020901C) /* DMA Burst Time-Out Control Register */
-
-#define MX1_WSRA __REG(0x00209040) /* DMA W-Size Register A */
-#define MX1_XSRA __REG(0x00209044) /* DMA X-Size Register A */
-#define MX1_YSRA __REG(0x00209048) /* DMA Y-Size Register A */
-
-#define MX1_WSRB __REG(0x0020904C) /* DMA W-Size Register B */
-#define MX1_XSRB __REG(0x00209050) /* DMA X-Size Register B */
-#define MX1_YSRB __REG(0x00209054) /* DMA Y-Size Register B */
-
-/* Channel 0 */
-
-#define MX1_SAR0 __REG(0x00209080) /* Channel 0 Source Address Register */
-#define MX1_DAR0 __REG(0x00209084) /* Channel 0 Destination Address Register */
-#define MX1_CNTR0 __REG(0x00209088) /* Channel 0 Count Register */
-#define MX1_CCR0 __REG(0x0020908C) /* Channel 0 Control Register */
-#define MX1_RSSR0 __REG(0x00209090) /* Channel 0 Request Source Select Register */
-#define MX1_BLR0 __REG(0x00209094) /* Channel 0 Burst Length Register */
-#define MX1_RTOR0 __REG(0x00209098) /* Channel 0 Request Time-Out Register */
-#define MX1_BUCR0 __REG(0x00209098) /* Channel 0 Bus Utilization Control Register */
-
-/* Channel 1 */
-
-#define MX1_SAR1 __REG(0x002090C0) /* Channel 1 Source Address Register */
-#define MX1_DAR1 __REG(0x002090C4) /* Channel 1 Destination Address Register */
-#define MX1_CNTR1 __REG(0x002090C8) /* Channel 1 Count Register */
-#define MX1_CCR1 __REG(0x002090CC) /* Channel 1 Control Register */
-#define MX1_RSSR1 __REG(0x002090D0) /* Channel 1 Request Source Select Register */
-#define MX1_BLR1 __REG(0x002090D4) /* Channel 1 Burst Length Register */
-#define MX1_RTOR1 __REG(0x002090D8) /* Channel 1 Request Time-Out Register */
-#define MX1_BUCR1 __REG(0x002090D8) /* Channel 1 Bus Utilization Control Register */
-
-/* Channel 2 */
-
-#define MX1_SAR2 __REG(0x00209100) /* Channel 2 Source Address Register */
-#define MX1_DAR2 __REG(0x00209104) /* Channel 2 Destination Address Register */
-#define MX1_CNTR2 __REG(0x00209108) /* Channel 2 Count Register */
-#define MX1_CCR2 __REG(0x0020910C) /* Channel 2 Control Register */
-#define MX1_RSSR2 __REG(0x00209110) /* Channel 2 Request Source Select Register */
-#define MX1_BLR2 __REG(0x00209114) /* Channel 2 Burst Length Register */
-#define MX1_RTOR2 __REG(0x00209118) /* Channel 2 Request Time-Out Register */
-#define MX1_BUCR2 __REG(0x00209118) /* Channel 2 Bus Utilization Control Register */
-
-/* Channel 3 */
-
-#define MX1_SAR3 __REG(0x00209140) /* Channel 3 Source Address Register */
-#define MX1_DAR3 __REG(0x00209144) /* Channel 3 Destination Address Register */
-#define MX1_CNTR3 __REG(0x00209148) /* Channel 3 Count Register */
-#define MX1_CCR3 __REG(0x0020914C) /* Channel 3 Control Register */
-#define MX1_RSSR3 __REG(0x00209150) /* Channel 3 Request Source Select Register */
-#define MX1_BLR3 __REG(0x00209154) /* Channel 3 Burst Length Register */
-#define MX1_RTOR3 __REG(0x00209158) /* Channel 3 Request Time-Out Register */
-#define MX1_BUCR3 __REG(0x00209158) /* Channel 3 Bus Utilization Control Register */
-
-/* Channel 4 */
-
-#define MX1_SAR4 __REG(0x00209180) /* Channel 4 Source Address Register */
-#define MX1_DAR4 __REG(0x00209184) /* Channel 4 Destination Address Register */
-#define MX1_CNTR4 __REG(0x00209188) /* Channel 4 Count Register */
-#define MX1_CCR4 __REG(0x0020918C) /* Channel 4 Control Register */
-#define MX1_RSSR4 __REG(0x00209190) /* Channel 4 Request Source Select Register */
-#define MX1_BLR4 __REG(0x00209194) /* Channel 4 Burst Length Register */
-#define MX1_RTOR4 __REG(0x00209198) /* Channel 4 Request Time-Out Register */
-#define MX1_BUCR4 __REG(0x00209198) /* Channel 4 Bus Utilization Control Register */
-
-/* Channel 5 */
-
-#define MX1_SAR5 __REG(0x002091C0) /* Channel 5 Source Address Register */
-#define MX1_DAR5 __REG(0x002091C4) /* Channel 5 Destination Address Register */
-#define MX1_CNTR5 __REG(0x002091C8) /* Channel 5 Count Register */
-#define MX1_CCR5 __REG(0x002091CC) /* Channel 5 Control Register */
-#define MX1_RSSR5 __REG(0x002091D0) /* Channel 5 Request Source Select Register */
-#define MX1_BLR5 __REG(0x002091D4) /* Channel 5 Burst Length Register */
-#define MX1_RTOR5 __REG(0x002091D8) /* Channel 5 Request Time-Out Register */
-#define MX1_BUCR5 __REG(0x002091D8) /* Channel 5 Bus Utilization Control Register */
-
-/* Channel 6 */
-
-#define MX1_SAR6 __REG(0x00209200) /* Channel 6 Source Address Register */
-#define MX1_DAR6 __REG(0x00209204) /* Channel 6 Destination Address Register */
-#define MX1_CNTR6 __REG(0x00209208) /* Channel 6 Count Register */
-#define MX1_CCR6 __REG(0x0020920C) /* Channel 6 Control Register */
-#define MX1_RSSR6 __REG(0x00209210) /* Channel 6 Request Source Select Register */
-#define MX1_BLR6 __REG(0x00209214) /* Channel 6 Burst Length Register */
-#define MX1_RTOR6 __REG(0x00209218) /* Channel 6 Request Time-Out Register */
-#define MX1_BUCR6 __REG(0x00209218) /* Channel 6 Bus Utilization Control Register */
-
-/* Channel 7 */
-
-#define MX1_SAR7 __REG(0x00209240) /* Channel 7 Source Address Register */
-#define MX1_DAR7 __REG(0x00209244) /* Channel 7 Destination Address Register */
-#define MX1_CNTR7 __REG(0x00209248) /* Channel 7 Count Register */
-#define MX1_CCR7 __REG(0x0020924C) /* Channel 7 Control Register */
-#define MX1_RSSR7 __REG(0x00209250) /* Channel 7 Request Source Select Register */
-#define MX1_BLR7 __REG(0x00209254) /* Channel 7 Burst Length Register */
-#define MX1_RTOR7 __REG(0x00209258) /* Channel 7 Request Time-Out Register */
-#define MX1_BUCR7 __REG(0x00209258) /* Channel 7 Bus Utilization Control Register */
-
-/* Channel 8 */
-
-#define MX1_SAR8 __REG(0x00209280) /* Channel 8 Source Address Register */
-#define MX1_DAR8 __REG(0x00209284) /* Channel 8 Destination Address Register */
-#define MX1_CNTR8 __REG(0x00209288) /* Channel 8 Count Register */
-#define MX1_CCR8 __REG(0x0020928C) /* Channel 8 Control Register */
-#define MX1_RSSR8 __REG(0x00209290) /* Channel 8 Request Source Select Register */
-#define MX1_BLR8 __REG(0x00209294) /* Channel 8 Burst Length Register */
-#define MX1_RTOR8 __REG(0x00209298) /* Channel 8 Request Time-Out Register */
-#define MX1_BUCR8 __REG(0x00209298) /* Channel 8 Bus Utilization Control Register */
-
-/* Channel 9 */
-
-#define MX1_SAR9 __REG(0x002092C0) /* Channel 9 Source Address Register */
-#define MX1_DAR9 __REG(0x002092C4) /* Channel 9 Destination Address Register */
-#define MX1_CNTR9 __REG(0x002092C8) /* Channel 9 Count Register */
-#define MX1_CCR9 __REG(0x002092CC) /* Channel 9 Control Register */
-#define MX1_RSSR9 __REG(0x002092D0) /* Channel 9 Request Source Select Register */
-#define MX1_BLR9 __REG(0x002092D4) /* Channel 9 Burst Length Register */
-#define MX1_RTOR9 __REG(0x002092D8) /* Channel 9 Request Time-Out Register */
-#define MX1_BUCR9 __REG(0x002092D8) /* Channel 9 Bus Utilization Control Register */
-
-/* Channel 10 */
-
-#define MX1_SAR10 __REG(0x00209300) /* Channel 10 Source Address Register */
-#define MX1_DAR10 __REG(0x00209304) /* Channel 10 Destination Address Register */
-#define MX1_CNTR10 __REG(0x00209308) /* Channel 10 Count Register */
-#define MX1_CCR10 __REG(0x0020930C) /* Channel 10 Control Register */
-#define MX1_RSSR10 __REG(0x00209310) /* Channel 10 Request Source Select Register */
-#define MX1_BLR10 __REG(0x00209314) /* Channel 10 Burst Length Register */
-#define MX1_RTOR10 __REG(0x00209318) /* Channel 10 Request Time-Out Register */
-#define MX1_BUCR10 __REG(0x00209318) /* Channel 10 Bus Utilization Control Register */
-
-#define MX1_TCR __REG(0x00209340) /* Test Control Register */
-#define MX1_TFIFOAR __REG(0x00209344) /* Test FIFO A Register */
-#define MX1_TDRR __REG(0x00209348) /* Test DMA Request Register */
-#define MX1_TDIPR __REG(0x0020934C) /* Test DMA In Progress Register */
-#define MX1_TFIFOBR __REG(0x00209350) /* Test FIFO B Register */
-
-/*
- * MX1 SIM registers
- */
-
-#define MX1_PORT_CNTL __REG(0x00211000) /* Port Control Register */
-#define MX1_CNTL __REG(0x00211004) /* Control Register */
-#define MX1_RCV_THRESHOLD __REG(0x00211008)/* Receive Threshold Register */
-#define MX1_ENABLE __REG(0x0021100C) /* Transmit/Receive Enable Register */
-#define MX1_XMT_STATUS __REG(0x00211010) /* Transmit Status Register */
-#define MX1_RCV_STATUS __REG(0x00211014) /* Receive Status Register */
-#define MX1_SIM_INT_MASK __REG(0x00211018) /* Interrupt Mask Register */
-#define MX1_XMT_BUF __REG(0x0021101C) /* Port Transmit Buffer Register */
-#define MX1_RCV_BUF __REG(0x00211020) /* Receive Buffer Register */
-#define MX1_PORT_DETECT __REG(0x00211024) /* Detect Register */
-#define MX1_XMT_THRESHOLD __REG(0x00211028)/* Transmit Threshold Register */
-#define MX1_GUARD_CNTL __REG(0x0021102C) /* Transmit Guard Control Register */
-#define MX1_OD_CONFIG __REG(0x00211030) /* Open-Drain Configuration Control Register */
-#define MX1_RESET_CNTL __REG(0x00211034) /* Reset Control Register */
-#define MX1_CHAR_WAIT __REG(0x00211038) /* Charactor Wait Timer Register */
-#define MX1_GPCNT __REG(0x0021103C) /* General Purpose Counter Register */
-#define MX1_DIVISOR __REG(0x00211040) /* Divisor Register */
-
-/*
- * MX1 USBD registers
- */
-
-#define MX1_USB_FRAME __REG(0x00212000) /* USB Frame Number and Match Register */
-#define MX1_USB_SPEC __REG(0x00212004) /* USB Spec & Release Number Register */
-#define MX1_USB_STAT __REG(0x00212008) /* USB Status Register */
-#define MX1_USB_CTRL __REG(0x0021200C) /* USB Control Register */
-#define MX1_USB_DADR __REG(0x00212010) /* USB Descriptor RAM Address Register */
-#define MX1_USB_DDAT __REG(0x00212014) /* USB Descriptor RAM/Endpoint buffer Data Register */
-#define MX1_USB_INTR __REG(0x00212018) /* USB Interrupt Status Register */
-#define MX1_USB_MASK __REG(0x0021201C) /* USB Interrupt Mask Register */
-#define MX1_USB_ENAB __REG(0x00212024) /* USB Enable Register */
-
-/* Endpoint 0 */
-#define MX1_USB_EP0_STAT __REG(0x00212030) /* Endpoint 0 Status/Control Register */
-#define MX1_USB_EP0_INTR __REG(0x00212034) /* Endpoint 0 Interrupt Status Register */
-#define MX1_USB_EP0_MASK __REG(0x00212038) /* Endpoint 0 Interrupt Mask Register */
-#define MX1_USB_EP0_FDAT __REG(0x0021203C) /* Endpoint 0 FIFO Data Register */
-#define MX1_USB_EP0_FSTAT __REG(0x00212040) /* Endpoint 0 FIFO Status Register */
-#define MX1_USB_EP0_FCTRL __REG(0x00212044) /* Endpoint 0 FIFO Control Register */
-#define MX1_USB_EP0_LRFP __REG(0x00212048) /* Endpoint 0 Last Read Frame Pointer Register */
-#define MX1_USB_EP0_LWFP __REG(0x0021204C) /* Endpoint 0 Last Write Frame Pointer Register */
-#define MX1_USB_EP0_FALRM __REG(0x00212050) /* Endpoint 0 FIFO Alarm Register */
-#define MX1_USB_EP0_FRDP __REG(0x00212054) /* Endpoint 0 FIFO Read Pointer Register */
-#define MX1_USB_EP0_FWRP __REG(0x00212058) /* Endpoint 0 FIFO Write Pointer Register */
-
-/* Endpoint 1 */
-#define MX1_USB_EP1_STAT __REG(0x00212060) /* Endpoint 1 Status/Control Register */
-#define MX1_USB_EP1_INTR __REG(0x00212064) /* Endpoint 1 Interrupt Status Register */
-#define MX1_USB_EP1_MASK __REG(0x00212068) /* Endpoint 1 Interrupt Mask Register */
-#define MX1_USB_EP1_FDAT __REG(0x0021206C) /* Endpoint 1 FIFO Data Register */
-#define MX1_USB_EP1_FSTAT __REG(0x00212070) /* Endpoint 1 FIFO Status Register */
-#define MX1_USB_EP1_FCTRL __REG(0x00212074) /* Endpoint 1 FIFO Control Register */
-#define MX1_USB_EP1_LRFP __REG(0x00212078) /* Endpoint 1 Last Read Frame Pointer Register */
-#define MX1_USB_EP1_LWFP __REG(0x0021207C) /* Endpoint 1 Last Write Frame Pointer Register */
-#define MX1_USB_EP1_FALRM __REG(0x00212080) /* Endpoint 1 FIFO Alarm Register */
-#define MX1_USB_EP1_FRDP __REG(0x00212084) /* Endpoint 1 FIFO Read Pointer Register */
-#define MX1_USB_EP1_FWRP __REG(0x00212088) /* Endpoint 1 FIFO Write Pointer Register */
-
-/* Endpoint 2 */
-#define MX1_USB_EP2_STAT __REG(0x00212090) /* Endpoint 2 Status/Control Register */
-#define MX1_USB_EP2_INTR __REG(0x00212094) /* Endpoint 2 Interrupt Status Register */
-#define MX1_USB_EP2_MASK __REG(0x00212098) /* Endpoint 2 Interrupt Mask Register */
-#define MX1_USB_EP2_FDAT __REG(0x0021209C) /* Endpoint 2 FIFO Data Register */
-#define MX1_USB_EP2_FSTAT __REG(0x002120A0) /* Endpoint 2 FIFO Status Register */
-#define MX1_USB_EP2_FCTRL __REG(0x002120A4) /* Endpoint 2 FIFO Control Register */
-#define MX1_USB_EP2_LRFP __REG(0x002120A8) /* Endpoint 2 Last Read Frame Pointer Register */
-#define MX1_USB_EP2_LWFP __REG(0x002120AC) /* Endpoint 2 Last Write Frame Pointer Register */
-#define MX1_USB_EP2_FALRM __REG(0x002120B0) /* Endpoint 2 FIFO Alarm Register */
-#define MX1_USB_EP2_FRDP __REG(0x002120B4) /* Endpoint 2 FIFO Read Pointer Register */
-#define MX1_USB_EP2_FWRP __REG(0x002120B8) /* Endpoint 2 FIFO Write Pointer Register */
-
-/* Endpoint 3 */
-#define MX1_USB_EP3_STAT __REG(0x002120C0) /* Endpoint 3 Status/Control Register */
-#define MX1_USB_EP3_INTR __REG(0x002120C4) /* Endpoint 3 Interrupt Status Register */
-#define MX1_USB_EP3_MASK __REG(0x002120C8) /* Endpoint 3 Interrupt Mask Register */
-#define MX1_USB_EP3_FDAT __REG(0x002120CC) /* Endpoint 3 FIFO Data Register */
-#define MX1_USB_EP3_FSTAT __REG(0x002120D0) /* Endpoint 3 FIFO Status Register */
-#define MX1_USB_EP3_FCTRL __REG(0x002120D4) /* Endpoint 3 FIFO Control Register */
-#define MX1_USB_EP3_LRFP __REG(0x002120D8) /* Endpoint 3 Last Read Frame Pointer Register */
-#define MX1_USB_EP3_LWFP __REG(0x002120DC) /* Endpoint 3 Last Write Frame Pointer Register */
-#define MX1_USB_EP3_FALRM __REG(0x002120E0) /* Endpoint 3 FIFO Alarm Register */
-#define MX1_USB_EP3_FRDP __REG(0x002120E4) /* Endpoint 3 FIFO Read Pointer Register */
-#define MX1_USB_EP3_FWRP __REG(0x002120E8) /* Endpoint 3 FIFO Write Pointer Register */
-
-/* Endpoint 4 */
-#define MX1_USB_EP4_STAT __REG(0x002120F0) /* Endpoint 4 Status/Control Register */
-#define MX1_USB_EP4_INTR __REG(0x002120F4) /* Endpoint 4 Interrupt Status Register */
-#define MX1_USB_EP4_MASK __REG(0x002120F8) /* Endpoint 4 Interrupt Mask Register */
-#define MX1_USB_EP4_FDAT __REG(0x002120FC) /* Endpoint 4 FIFO Data Register */
-#define MX1_USB_EP4_FSTAT __REG(0x00212100) /* Endpoint 4 FIFO Status Register */
-#define MX1_USB_EP4_FCTRL __REG(0x00212104) /* Endpoint 4 FIFO Control Register */
-#define MX1_USB_EP4_LRFP __REG(0x00212108) /* Endpoint 4 Last Read Frame Pointer Register */
-#define MX1_USB_EP4_LWFP __REG(0x0021210C) /* Endpoint 4 Last Write Frame Pointer Register */
-#define MX1_USB_EP4_FALRM __REG(0x00212110) /* Endpoint 4 FIFO Alarm Register */
-#define MX1_USB_EP4_FRDP __REG(0x00212114) /* Endpoint 4 FIFO Read Pointer Register */
-#define MX1_USB_EP4_FWRP __REG(0x00212118) /* Endpoint 4 FIFO Write Pointer Register */
-
-/* Endpoint 5 */
-#define MX1_USB_EP5_STAT __REG(0x00212120) /* Endpoint 5 Status/Control Register */
-#define MX1_USB_EP5_INTR __REG(0x00212124) /* Endpoint 5 Interrupt Status Register */
-#define MX1_USB_EP5_MASK __REG(0x00212128) /* Endpoint 5 Interrupt Mask Register */
-#define MX1_USB_EP5_FDAT __REG(0x0021212C) /* Endpoint 5 FIFO Data Register */
-#define MX1_USB_EP5_FSTAT __REG(0x00212130) /* Endpoint 5 FIFO Status Register */
-#define MX1_USB_EP5_FCTRL __REG(0x00212134) /* Endpoint 5 FIFO Control Register */
-#define MX1_USB_EP5_LRFP __REG(0x00212138) /* Endpoint 5 Last Read Frame Pointer Register */
-#define MX1_USB_EP5_LWFP __REG(0x0021213C) /* Endpoint 5 Last Write Frame Pointer Register */
-#define MX1_USB_EP5_FALRM __REG(0x00212140) /* Endpoint 5 FIFO Alarm Register */
-#define MX1_USB_EP5_FRDP __REG(0x00212144) /* Endpoint 5 FIFO Read Pointer Register */
-#define MX1_USB_EP5_FWRP __REG(0x00212148) /* Endpoint 5 FIFO Write Pointer Register */
-
-/*
- * MX1 SPI 1 registers
- */
-#define MX1_RXDATAREG1 __REG(0x00213000) /* SPI 1 Rx Data Register */
-#define MX1_TXDATAREG1 __REG(0x00213004) /* SPI 1 Tx Data Register */
-#define MX1_CONTROLREG1 __REG(0x00213008) /* SPI 1 Control Register */
-#define MX1_INTREG1 __REG(0x0021300C) /* SPI 1 Interrupt Control/Status Register */
-#define MX1_TESTREG1 __REG(0x00213010) /* SPI 1 Test Register */
-#define MX1_PERIODREG1 __REG(0x00213014) /* SPI 1 Sample Period Control Register */
-#define MX1_DMAREG1 __REG(0x00213018) /* SPI 1 DMA Control Register */
-#define MX1_RESETREG1 __REG(0x00213018) /* SPI 1 Soft Reset Register */
-
-/*
- * MX1 MMC/SDHC registers
- */
-#define MX1_STR_STP_CLK __REG(0x00214000) /* MMC/SD Clock Control Register */
-#define MX1_STATUS __REG(0x00214004) /* MMC/SD Status Register */
-#define MX1_CLK_RATE __REG(0x00214008) /* MMC/SD Clock Rate Register */
-#define MX1_CMD_DAT_CONT __REG(0x0021400C) /* MMC/SD Command & Data Control Register */
-#define MX1_RES_TO __REG(0x00214010) /* MMC/SD Response Time Out Register */
-#define MX1_READ_TO __REG(0x00214014) /* MMC/SD Read Time Out Register */
-#define MX1_BLK_LEN __REG(0x00214018) /* MMC/SD Block Length Register */
-#define MX1_NOB __REG(0x0021401C) /* MMC/SD Number of Block Register */
-#define MX1_REV_NO __REG(0x00214020) /* MMC/SD Revision Number Register */
-#define MX1_MMC_INT_MASK __REG(0x00214024) /* MMC/SD Interrupt Mask Register */
-#define MX1_CMD __REG(0x00214028) /* MMC/SD Command Number Register */
-#define MX1_ARGH __REG(0x0021402C) /* MMC/SD Higher Argument Register */
-#define MX1_ARGL __REG(0x00214030) /* MMC/SD Lower Argument Register */
-#define MX1_RES_FIFO __REG(0x00214034) /* MMC/SD Response FIFO Register */
-#define MX1_BUFFER_ACCESS __REG(0x00214038) /* MMC/SD Buffer Access Register */
-
-/*
- * MX1 ASP registers
- */
-#define MX1_ASP_PADFIFO __REG(0x00215000) /* Pen Sample FIFO */
-#define MX1_ASP_VADFIFO __REG(0x00215004) /* Voice ADC Register */
-#define MX1_ASP_VDAFIFO __REG(0x00215008) /* Voice DAC Register */
-#define MX1_ASP_VADCOEF __REG(0x0021500C) /* Voice ADC FIR Coefficients RAM */
-#define MX1_ASP_ACNTLCR __REG(0x00215010) /* Control Register */
-#define MX1_ASP_PSMPLRG __REG(0x00215014) /* Pen A/D Sample Rate Control Register */
-#define MX1_ASP_ICNTLR __REG(0x00215018) /* Interrupt Control Register */
-#define MX1_ASP_ISTATR __REG(0x0021501C) /* Interrupt/Error Status Register */
-#define MX1_ASP_VADGAIN __REG(0x00215020) /* Voice ADC Control Register */
-#define MX1_ASP_VDAGAIN __REG(0x00215024) /* Voice DAC Control Register */
-#define MX1_ASP_VDACOEF __REG(0x00215028) /* Voice DAC FIR Coefficients RAM */
-#define MX1_ASP_CLKDIV __REG(0x0021502C) /* Clock Divide Register */
-#define MX1_ASP_CMPCNTL __REG(0x0021502C) /* Compare Control Register */
-
-/*
- * MX1 BTA registers
- */
-
-/*
- * MX1 I2C registers
- */
-#define MX1_IADR __REG(0x00217000) /* I2C Address Register */
-#define MX1_IFDR __REG(0x00217004) /* I2C Frequency Divider Register */
-#define MX1_I2CR __REG(0x00217008) /* I2C Control Register */
-#define MX1_I2CSR __REG(0x0021700C) /* I2C Status Register */
-#define MX1_I2DR __REG(0x00217010) /* I2C Data I/O Register */
-
-/*
- * MX1 SSI registers
- */
-#define MX1_STX __REG(0x00218000) /* SSI Transmit Data Register */
-#define MX1_SRX __REG(0x00218004) /* SSI Receive Data Register */
-#define MX1_SCSR __REG(0x00218008) /* SSI Control/Status Register */
-#define MX1_STCR __REG(0x0021800C) /* SSI Transmit Configuration Register */
-#define MX1_SRCR __REG(0x00218010) /* SSI Recieve Configuration Register */
-#define MX1_STCCR __REG(0x00218014) /* SSI Transmit Clock Control Register */
-#define MX1_SRCCR __REG(0x00218018) /* SSI Receive Clock Control Register */
-#define MX1_STSR __REG(0x0021801C) /* SSI Time Slot Register */
-#define MX1_SFCSR __REG(0x00218020) /* SSI FIFO Control/Status Register */
-#define MX1_SOR __REG(0x00218024) /* SSI Option Register */
-
-/*
- * MX1 SPI 2 registers
- */
-#define MX1_RXDATAREG2 __REG(0x00219000) /* SPI 2 Rx Data Register */
-#define MX1_TXDATAREG2 __REG(0x00219004) /* SPI 2 Tx Data Register */
-#define MX1_CONTROLREG2 __REG(0x00219008) /* SPI 2 Control Register */
-#define MX1_INTREG2 __REG(0x0021900C) /* SPI 2 Interrupt Control/Status Register */
-#define MX1_TESTREG2 __REG(0x00219010) /* SPI 2 Test Register */
-#define MX1_PERIODREG2 __REG(0x00219014) /* SPI 2 Sample Period Control Register */
-#define MX1_DMAREG2 __REG(0x00219018) /* SPI 2 DMA Control Register */
-#define MX1_RESETREG2 __REG(0x00219018) /* SPI 2 Soft Reset Register */
-
-/*
- * MX1 MSHC registers
- */
-#define MX1_MSCMD __REG(0x0021A000) /* Memory Stick Command Register */
-#define MX1_MSCS __REG(0x0021A002) /* Memory Stick Control/Status Register */
-#define MX1_MSTDATA __REG(0x0021A004) /* Memory Stick Transmit FIFO Data Register */
-#define MX1_MSRDATA __REG(0x0021A004) /* Memory Stick Recieve FIFO Data Register */
-#define MX1_MSICS __REG(0x0021A006) /* Memory Stick Interrupt Control/Status Register */
-#define MX1_MSPPCD __REG(0x0021A008) /* Memory Stick Parallel Port Control/Data Register */
-#define MX1_MSC2 __REG(0x0021A00A) /* Memory Stick Control 2 Register */
-#define MX1_MSACD __REG(0x0021A00C) /* Memory Stick Auto Command Register */
-#define MX1_MSFAECS __REG(0x0021A00E) /* Memory Stick FIFO Access Error Control/Status Register */
-#define MX1_MSCLKD __REG(0x0021A010) /* Memory Stick Serial Clock divider Register */
-#define MX1_MSDRQC __REG(0x0021A012) /* Memory Stick DMA Request Control Register */
-
-/*
- * MX1 PLLCLK registers
- */
-#define MX1_CSCR __REG(0x0021B000) /* Clock Source Control Register */
-#define MX1_MPCTL0 __REG(0x0021B004) /* MCU PLL Control Register 0 */
-#define MX1_MPCTL1 __REG(0x0021B008) /* MCU PLL & System Clock Control Register 1 */
-#define MX1_UPCTL0 __REG(0x0021B00C) /* USB PLL Control Register 0 */
-#define MX1_UPCTL1 __REG(0x0021B010) /* USB PLL Control Register 1 */
-#define MX1_PCDR __REG(0x0021B020) /* Peripheral Clock Divider Register */
-
-/*
- * MX1 RESET registers
- */
-#define MX1_RSR __REG(0x0021B800) /* Reset Source Register */
-
-/*
- * MX1 SYS CTRL registers
- */
-#define MX1_SIDR __REG(0x0021B804) /* Silicon ID Register */
-#define MX1_FMCR __REG(0x0021B808) /* Function MultiPlexing Control Register */
-#define MX1_GPCR __REG(0x0021B80C) /* Global Peripheral Control Register */
-
-/*
- * MX1 GPIO registers
- */
-
-/* Port A */
-#define MX1_DDIR_A __REG(0x0021C000) /* Port A Data Direction Register */
-#define MX1_OCR1_A __REG(0x0021C004) /* Port A Output Configuration Register 1 */
-#define MX1_OCR2_A __REG(0x0021C008) /* Port A Output Configuration Register 2 */
-#define MX1_ICONFA1_A __REG(0x0021C00C) /* Port A Input Configuration Register A1 */
-#define MX1_ICONFA2_A __REG(0x0021C010) /* Port A Input Configuration Register A2 */
-#define MX1_ICONFB1_A __REG(0x0021C014) /* Port A Input Configuration Register B1 */
-#define MX1_ICONFB2_A __REG(0x0021C018) /* Port A Input Configuration Register B2 */
-#define MX1_DR_A __REG(0x0021C01C) /* Port A Data Register */
-#define MX1_GIUS_A __REG(0x0021C020) /* Port A GPIO In Use Register */
-#define MX1_SSR_A __REG(0x0021C024) /* Port A Sample Status Register */
-#define MX1_ICR1_A __REG(0x0021C028) /* Port A Interrupt Configuration Register 1 */
-#define MX1_ICR2_A __REG(0x0021C02C) /* Port A Interrupt Configuration Register 2 */
-#define MX1_IMR_A __REG(0x0021C030) /* Port A Interrupt Mask Register */
-#define MX1_ISR_A __REG(0x0021C034) /* Port A Interrupt Status Register */
-#define MX1_GPR_A __REG(0x0021C038) /* Port A General Purpose Register */
-#define MX1_SWR_A __REG(0x0021C03C) /* Port A Software Reset Register */
-#define MX1_PUEN_A __REG(0x0021C040) /* Port A Pull Up Enable Register */
-
-/* Port B */
-#define MX1_DDIR_B __REG(0x0021C100) /* Port B Data Direction Register */
-#define MX1_OCR1_B __REG(0x0021C104) /* Port B Output Configuration Register 1 */
-#define MX1_OCR2_B __REG(0x0021C108) /* Port B Output Configuration Register 2 */
-#define MX1_ICONFA1_B __REG(0x0021C10C) /* Port B Input Configuration Register A1 */
-#define MX1_ICONFA2_B __REG(0x0021C110) /* Port B Input Configuration Register A2 */
-#define MX1_ICONFB1_B __REG(0x0021C114) /* Port B Input Configuration Register B1 */
-#define MX1_ICONFB2_B __REG(0x0021C118) /* Port B Input Configuration Register B2 */
-#define MX1_DR_B __REG(0x0021C11C) /* Port B Data Register */
-#define MX1_GIUS_B __REG(0x0021C120) /* Port B GPIO In Use Register */
-#define MX1_SSR_B __REG(0x0021C124) /* Port B Sample Status Register */
-#define MX1_ICR1_B __REG(0x0021C128) /* Port B Interrupt Configuration Register 1 */
-#define MX1_ICR2_B __REG(0x0021C12C) /* Port B Interrupt Configuration Register 2 */
-#define MX1_IMR_B __REG(0x0021C130) /* Port B Interrupt Mask Register */
-#define MX1_ISR_B __REG(0x0021C134) /* Port B Interrupt Status Register */
-#define MX1_GPR_B __REG(0x0021C138) /* Port B General Purpose Register */
-#define MX1_SWR_B __REG(0x0021C13C) /* Port B Software Reset Register */
-#define MX1_PUEN_B __REG(0x0021C140) /* Port B Pull Up Enable Register */
-
-/* Port C */
-#define MX1_DDIR_C __REG(0x0021C200) /* Port C Data Direction Register */
-#define MX1_OCR1_C __REG(0x0021C204) /* Port C Output Configuration Register 1 */
-#define MX1_OCR2_C __REG(0x0021C208) /* Port C Output Configuration Register 2 */
-#define MX1_ICONFA1_C __REG(0x0021C20C) /* Port C Input Configuration Register A1 */
-#define MX1_ICONFA2_C __REG(0x0021C210) /* Port C Input Configuration Register A2 */
-#define MX1_ICONFB1_C __REG(0x0021C214) /* Port C Input Configuration Register B1 */
-#define MX1_ICONFB2_C __REG(0x0021C218) /* Port C Input Configuration Register B2 */
-#define MX1_DR_C __REG(0x0021C21C) /* Port C Data Register */
-#define MX1_GIUS_C __REG(0x0021C220) /* Port C GPIO In Use Register */
-#define MX1_SSR_C __REG(0x0021C224) /* Port C Sample Status Register */
-#define MX1_ICR1_C __REG(0x0021C228) /* Port C Interrupt Configuration Register 1 */
-#define MX1_ICR2_C __REG(0x0021C22C) /* Port C Interrupt Configuration Register 2 */
-#define MX1_IMR_C __REG(0x0021C230) /* Port C Interrupt Mask Register */
-#define MX1_ISR_C __REG(0x0021C234) /* Port C Interrupt Status Register */
-#define MX1_GPR_C __REG(0x0021C238) /* Port C General Purpose Register */
-#define MX1_SWR_C __REG(0x0021C23C) /* Port C Software Reset Register */
-#define MX1_PUEN_C __REG(0x0021C240) /* Port C Pull Up Enable Register */
-
-/* Port D */
-#define MX1_DDIR_D __REG(0x0021C300) /* Port D Data Direction Register */
-#define MX1_OCR1_D __REG(0x0021C304) /* Port D Output Configuration Register 1 */
-#define MX1_OCR2_D __REG(0x0021C308) /* Port D Output Configuration Register 2 */
-#define MX1_ICONFA1_D __REG(0x0021C30C) /* Port D Input Configuration Register A1 */
-#define MX1_ICONFA2_D __REG(0x0021C310) /* Port D Input Configuration Register A2 */
-#define MX1_ICONFB1_D __REG(0x0021C314) /* Port D Input Configuration Register B1 */
-#define MX1_ICONFB2_D __REG(0x0021C318) /* Port D Input Configuration Register B2 */
-#define MX1_DR_D __REG(0x0021C31C) /* Port D Data Register */
-#define MX1_GIUS_D __REG(0x0021C320) /* Port D GPIO In Use Register */
-#define MX1_SSR_D __REG(0x0021C324) /* Port D Sample Status Register */
-#define MX1_ICR1_D __REG(0x0021C328) /* Port D Interrupt Configuration Register 1 */
-#define MX1_ICR2_D __REG(0x0021C32C) /* Port D Interrupt Configuration Register 2 */
-#define MX1_IMR_D __REG(0x0021C330) /* Port D Interrupt Mask Register */
-#define MX1_ISR_D __REG(0x0021C334) /* Port D Interrupt Status Register */
-#define MX1_GPR_D __REG(0x0021C338) /* Port D General Purpose Register */
-#define MX1_SWR_D __REG(0x0021C33C) /* Port D Software Reset Register */
-#define MX1_PUEN_D __REG(0x0021C340) /* Port D Pull Up Enable Register */
-
-/*
- * MX1 EIM registers
- */
-#define MX1_CS0U __REG(0x00220000) /* Chip Select 0 Upper Control Register */
-#define MX1_CS0L __REG(0x00220004) /* Chip Select 0 Lower Control Register */
-#define MX1_CS1U __REG(0x00220008) /* Chip Select 1 Upper Control Register */
-#define MX1_CS1L __REG(0x0022000C) /* Chip Select 1 Lower Control Register */
-#define MX1_CS2U __REG(0x00220010) /* Chip Select 2 Upper Control Register */
-#define MX1_CS2L __REG(0x00220014) /* Chip Select 2 Lower Control Register */
-#define MX1_CS3U __REG(0x00220018) /* Chip Select 3 Upper Control Register */
-#define MX1_CS3L __REG(0x0022001C) /* Chip Select 3 Lower Control Register */
-#define MX1_CS4U __REG(0x00220020) /* Chip Select 4 Upper Control Register */
-#define MX1_CS4L __REG(0x00220024) /* Chip Select 4 Lower Control Register */
-#define MX1_CS5U __REG(0x00220028) /* Chip Select 5 Upper Control Register */
-#define MX1_CS5L __REG(0x0022002C) /* Chip Select 5 Lower Control Register */
-#define MX1_WEIM __REG(0x00220030) /* weim cONFIGURATION Register */
-
-/*
- * MX1 SDRAMC registers
- */
-#define MX1_SDCTL0 __REG(0x00221000) /* SDRAM 0 Control Register */
-#define MX1_SDCTL1 __REG(0x00221004) /* SDRAM 1 Control Register */
-#define MX1_MISCELLANEOUS __REG(0x00221014) /* Miscellaneous Register */
-#define MX1_SDRST __REG(0x00221018) /* SDRAM Reset Register */
-
-/*
- * MX1 MMA registers
- */
-#define MX1_MMA_MAC_MOD __REG(0x00222000) /* MMA MAC Module Register */
-#define MX1_MMA_MAC_CTRL __REG(0x00222004) /* MMA MAC Control Register */
-#define MX1_MMA_MAC_MULT __REG(0x00222008) /* MMA MAC Multiply Counter Register */
-#define MX1_MMA_MAC_ACCU __REG(0x0022200C) /* MMA MAC Accumulate Counter Register */
-#define MX1_MMA_MAC_INTR __REG(0x00222010) /* MMA MAC Interrupt Register */
-#define MX1_MMA_MAC_INTR_MASK __REG(0x00222014) /* MMA MAC Interrupt Mask Register */
-#define MX1_MMA_MAC_FIFO __REG(0x00222018) /* MMA MAC FIFO Register */
-#define MX1_MMA_MAC_FIFO_STAT __REG(0x0022201C) /* MMA MAC FIFO Status Register */
-#define MX1_MMA_MAC_BURST __REG(0x00222020) /* MMA MAC Burst Count Register */
-#define MX1_MMA_MAC_BITSEL __REG(0x00222024) /* MMA MAC Bit Select Register */
-
-#define MX1_MMA_MAC_XBASE __REG(0x00222200) /* MMA MAC X Base Address Register */
-#define MX1_MMA_MAC_XINDEX __REG(0x00222204) /* MMA MAC X Index Register */
-#define MX1_MMA_MAC_XLENGTH __REG(0x00222208) /* MMA MAC X Length Register */
-#define MX1_MMA_MAC_XMODIFY __REG(0x0022220C) /* MMA MAC X Modify Register */
-#define MX1_MMA_MAC_XINCR __REG(0x00222210) /* MMA MAC X Increment Register */
-#define MX1_MMA_MAC_XCOUNT __REG(0x00222214) /* MMA MAC X Count Register */
-
-#define MX1_MMA_MAC_YBASE __REG(0x00222300) /* MMA MAC Y Base Address Register */
-#define MX1_MMA_MAC_YINDEX __REG(0x00222304) /* MMA MAC Y Index Register */
-#define MX1_MMA_MAC_YLENGTH __REG(0x00222308) /* MMA MAC Y Length Register */
-#define MX1_MMA_MAC_YMODIFY __REG(0x0022230C) /* MMA MAC Y Modify Register */
-#define MX1_MMA_MAC_YINCR __REG(0x00222310) /* MMA MAC Y Increment Register */
-#define MX1_MMA_MAC_YCOUNT __REG(0x00222314) /* MMA MAC Y Count Register */
-
-#define MX1_MMA_DCTCTRL __REG(0x00222400) /* DCT/iDCT Control Register */
-#define MX1_MMA_DCTVERSION __REG(0x00222404) /* DCT/iDCT Version Register */
-#define MX1_MMA_DCTIRQENA __REG(0x00222408) /* DCT/iDCT IRQ Enable Register */
-#define MX1_MMA_DCTIRQSTAT __REG(0x0022240C) /* DCT/iDCT IRQ Status Register */
-#define MX1_MMA_DCTSRCDATA __REG(0x00222410) /* DCT/iDCT Source Data Address */
-#define MX1_MMA_DCTDESDATA __REG(0x00222414) /* DCT/iDCT Destination Data Address */
-#define MX1_MMA_DCTXOFF __REG(0x00222418) /* DCT/iDCT X-Offset Address */
-#define MX1_MMA_DCTYOFF __REG(0x0022241C) /* DCT/iDCT Y-Offset Address */
-#define MX1_MMA_DCTXYCNT __REG(0x00222420) /* DCT/iDCT XY Count */
-#define MX1_MMA_DCTSKIP __REG(0x00222424) /* DCT/iDCT Skip Address */
-#define MX1_MMA_DCTFIFO __REG(0x00222500) /* DCT/iDCT Data FIFO */
-
-/*
- * MX1 AITC registers
- */
-#define MX1_INTCNTL __REG(0x00223000) /* Interrupt Control Register */
-#define MX1_NIMASK __REG(0x00223004) /* Normal Interrupt Mask Register */
-#define MX1_INTENNUM __REG(0x00223008) /* Interrupt Enable Number Register */
-#define MX1_INTDISNUM __REG(0x0022300C) /* Interrupt Disable Number Register */
-#define MX1_INTENABLEH __REG(0x00223010) /* Interrupt Enable Register High */
-#define MX1_INTENABLEL __REG(0x00223014) /* Interrupt Enable Register Low */
-#define MX1_INTTYPEH __REG(0x00223018) /* Interrupt Type Register High */
-#define MX1_INTTYPEL __REG(0x0022301C) /* Interrupt Type Register Low */
-#define MX1_NIPRIORITY7 __REG(0x00223020) /* Normal Interrupt Priority Level Register 7*/
-#define MX1_NIPRIORITY6 __REG(0x00223024) /* Normal Interrupt Priority Level Register 6*/
-#define MX1_NIPRIORITY5 __REG(0x00223028) /* Normal Interrupt Priority Level Register 5*/
-#define MX1_NIPRIORITY4 __REG(0x0022302C) /* Normal Interrupt Priority Level Register 4*/
-#define MX1_NIPRIORITY3 __REG(0x00223030) /* Normal Interrupt Priority Level Register 3*/
-#define MX1_NIPRIORITY2 __REG(0x00223034) /* Normal Interrupt Priority Level Register 2*/
-#define MX1_NIPRIORITY1 __REG(0x00223038) /* Normal Interrupt Priority Level Register 1*/
-#define MX1_NIPRIORITY0 __REG(0x0022303C) /* Normal Interrupt Priority Level Register 0*/
-#define MX1_NIVECSR __REG(0x00223040) /* Normal Interrupt Vector & Status Register */
-#define MX1_FIVECSR __REG(0x00223044) /* Fast Interrupt Vector & Status Register */
-#define MX1_INTSRCH __REG(0x00223048) /* Interrupt Source Register High */
-#define MX1_INTSRCL __REG(0x0022304C) /* Interrupt Source Register Low */
-#define MX1_INTFRCH __REG(0x00223050) /* Interrupt Force Register High */
-#define MX1_INTFRCL __REG(0x00223054) /* Interrupt Force Register Low */
-#define MX1_NIPNDH __REG(0x00223058) /* Normal Interrupt Pending Register High */
-#define MX1_NIPNDL __REG(0x0022305C) /* Normal Interrupt Pending Register Low */
-#define MX1_FIPNDH __REG(0x00223060) /* Fast Interrupt Pending Register High */
-#define MX1_FIPNDL __REG(0x00223064) /* Fast Interrupt Pending Register Low */
-
-/*
- * MX1 CSI registers
- */
-#define MX1_CSICR1 __REG(0x00224000) /* CSI Control Register 1 */
-#define MX1_CSICR2 __REG(0x00224004) /* CSI Control Register 2 */
-#define MX1_CSISR __REG(0x00224008) /* CSI Status Register 1 */
-#define MX1_CSISTATR __REG(0x0022400C) /* CSI Statistic FIFO Register 1 */
-#define MX1_CSIRXR __REG(0x00224010) /* CSI RxFIFO Register 1 */
-
-#endif /* __MC9328_H__ */
-
-#if 0
-/*
- MX1 dma definition
-*/
-
-#define MAX_DMA_ADDRESS 0xffffffff
-
-/*#define MAX_DMA_CHANNELS 0 */
-
-#define MAX_DMA_CHANNELS 11
-#define MAX_DMA_2D_REGSET 2
-
-/* MX1 DMA module registers' address */
-
-#define MX1_DMA_BASE IO_ADDRESS(0x00209000)
-#define MX1_DMA_DCR (MX1_DMA_BASE + 0x00) /* DMA control register */
-#define MX1_DMA_DISR (MX1_DMA_BASE + 0x04) /* DMA interrupt status register */
-#define MX1_DMA_DIMR (MX1_DMA_BASE + 0x08) /* DMA interrupt mask register */
-#define MX1_DMA_DBTOSR (MX1_DMA_BASE + 0x0C) /* DMA burst time-out status register */
-#define MX1_DMA_DRTOSR (MX1_DMA_BASE + 0x10) /* DMA request time-out status register */
-#define MX1_DMA_DSESR (MX1_DMA_BASE + 0x14) /* DMA transfer error status register */
-#define MX1_DMA_DBOSR (MX1_DMA_BASE + 0x18) /* DMA buffer overflow status register */
-#define MX1_DMA_DBTOCR (MX1_DMA_BASE + 0x1C) /* DMA burst time-out control register */
-#define MX1_DMA_WSRA (MX1_DMA_BASE + 0x40) /* W-size register A */
-#define MX1_DMA_XSRA (MX1_DMA_BASE + 0x44) /* X-size register A */
-#define MX1_DMA_YSRA (MX1_DMA_BASE + 0x48) /* Y-size register A */
-#define MX1_DMA_WSRB (MX1_DMA_BASE + 0x4C) /* W-size register B */
-#define MX1_DMA_XSRB (MX1_DMA_BASE + 0x50) /* X-size register B */
-#define MX1_DMA_YSRB (MX1_DMA_BASE + 0x54) /* Y-size register B */
-
-#define MX1_DMA_SAR0 (MX1_DMA_BASE + 0x80) /* source address register 0 */
-#define MX1_DMA_DAR0 (MX1_DMA_BASE + 0x84) /* destination address register 0 */
-#define MX1_DMA_CNTR0 (MX1_DMA_BASE + 0x88) /* count register 0 */
-#define MX1_DMA_CCR0 (MX1_DMA_BASE + 0x8C) /* channel control register 0 */
-#define MX1_DMA_RSSR0 (MX1_DMA_BASE + 0x90) /* request source select register 0 */
-#define MX1_DMA_BLR0 (MX1_DMA_BASE + 0x94) /* burst length register 0 */
-#define MX1_DMA_RTOR0 (MX1_DMA_BASE + 0x98) /* request time-out register 0 */
-#define MX1_DMA_BUCR0 (MX1_DMA_BASE + 0x98) /* bus utilization control register 0 */
-
-/* register set 1 to 10 are offseted by 0x40 each = 0x10 pointers away */
-
-#define DMA_REG_SET_OFS 0x10
-
-/* MX1 DMA module registers */
-#define _reg_DMA_DCR (*((P_VU32)MX1_DMA_DCR))
-#define _reg_DMA_DISR (*((P_VU32)MX1_DMA_DISR))
-#define _reg_DMA_DIMR (*((P_VU32)MX1_DMA_DIMR))
-#define _reg_DMA_DBTOSR (*((P_VU32)MX1_DMA_DBTOSR))
-#define _reg_DMA_DRTOSR (*((P_VU32)MX1_DMA_DRTOSR))
-#define _reg_DMA_DSESR (*((P_VU32)MX1_DMA_DSESR))
-#define _reg_DMA_DBOSR (*((P_VU32)MX1_DMA_DBOSR))
-#define _reg_DMA_DBTOCR (*((P_VU32)MX1_DMA_DBTOCR))
-#define _reg_DMA_WSRA (*((P_VU32)MX1_DMA_WSRA))
-#define _reg_DMA_XSRA (*((P_VU32)MX1_DMA_XSRA))
-#define _reg_DMA_YSRA (*((P_VU32)MX1_DMA_YSRA))
-#define _reg_DMA_WSRB (*((P_VU32)MX1_DMA_WSRB))
-#define _reg_DMA_XSRB (*((P_VU32)MX1_DMA_XSRB))
-#define _reg_DMA_YSRB (*((P_VU32)MX1_DMA_YSRB))
-#define _reg_DMA_SAR0 (*((P_VU32)MX1_DMA_SAR0))
-#define _reg_DMA_DAR0 (*((P_VU32)MX1_DMA_DAR0))
-#define _reg_DMA_CNTR0 (*((P_VU32)MX1_DMA_CNTR0))
-#define _reg_DMA_CCR0 (*((P_VU32)MX1_DMA_CCR0))
-#define _reg_DMA_RSSR0 (*((P_VU32)MX1_DMA_RSSR0))
-#define _reg_DMA_BLR0 (*((P_VU32)MX1_DMA_BLR0))
-#define _reg_DMA_RTOR0 (*((P_VU32)MX1_DMA_RTOR0))
-#define _reg_DMA_BUCR0 (*((P_VU32)MX1_DMA_BUCR0))
-
-/* DMA error type definition */
-#define MX1_DMA_ERR_BTO 0 /* burst time-out */
-#define MX1_DMA_ERR_RTO 1 /* request time-out */
-#define MX1_DMA_ERR_TE 2 /* transfer error */
-#define MX1_DMA_ERR_BO 3 /* buffer overflow */
-
-/* Embedded SRAM */
-
-#define MX1_SRAM_BASE 0x00300000
-#define MX1_SRAM_SIZE 0x00020000
-
-#define
-
-#define MX1ADS_SFLASH_BASE 0x0C000000
-#define MX1ADS_SFLASH_SIZE SZ_16M
-
-#define MX1ADS_IO_BASE 0x00200000
-#define MX1ADS_IO_SIZE SZ_256K
-
-#define MX1ADS_VID_BASE 0x00300000
-#define MX1ADS_VID_SIZE 0x26000
-
-#define MX1ADS_VID_START IO_ADDRESS(MX1ADS_VID_BASE)
-
-#define MX1_GPIO_BASE 0x0021C000 /* GPIO */
-#define MX1_EXT_UART_BASE 0x15000000 /* external UART */
-#define MX1_TMR1_BASE 0x00202000 /* Timer1 */
-#define MX1ADS_FLASH_BASE 0x0C000000 /* sync FLASH */
-#define MX1_ESRAM_BASE 0x00300000 /* embedded SRAM */
-#define MX1ADS_SDRAM_DISK_BASE 0x0B000000 /* SDRAM disk base (last 16M of SDRAM) */
-
-/* ------------------------------------------------------------------------
- * Motorola MX1 system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- * Register offests.
- *
- */
-
-#define MX1ADS_AIPI1_OFFSET 0x00000
-#define MX1ADS_WDT_OFFSET 0x01000
-#define MX1ADS_TIM1_OFFSET 0x02000
-#define MX1ADS_TIM2_OFFSET 0x03000
-#define MX1ADS_RTC_OFFSET 0x04000
-#define MX1ADS_LCDC_OFFSET 0x05000
-#define MX1ADS_UART1_OFFSET 0x06000
-#define MX1ADS_UART2_OFFSET 0x07000
-#define MX1ADS_PWM_OFFSET 0x08000
-#define MX1ADS_DMAC_OFFSET 0x09000
-#define MX1ADS_AIPI2_OFFSET 0x10000
-#define MX1ADS_SIM_OFFSET 0x11000
-#define MX1ADS_USBD_OFFSET 0x12000
-#define MX1ADS_SPI1_OFFSET 0x13000
-#define MX1ADS_MMC_OFFSET 0x14000
-#define MX1ADS_ASP_OFFSET 0x15000
-#define MX1ADS_BTA_OFFSET 0x16000
-#define MX1ADS_I2C_OFFSET 0x17000
-#define MX1ADS_SSI_OFFSET 0x18000
-#define MX1ADS_SPI2_OFFSET 0x19000
-#define MX1ADS_MSHC_OFFSET 0x1A000
-#define MX1ADS_PLL_OFFSET 0x1B000
-#define MX1ADS_GPIO_OFFSET 0x1C000
-#define MX1ADS_EIM_OFFSET 0x20000
-#define MX1ADS_SDRAMC_OFFSET 0x21000
-#define MX1ADS_MMA_OFFSET 0x22000
-#define MX1ADS_AITC_OFFSET 0x23000
-#define MX1ADS_CSI_OFFSET 0x24000
-
-/*
- * Register BASEs, based on OFFSETs
- *
- */
-
-#define MX1ADS_AIPI1_BASE (MX1ADS_AIPI1_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_WDT_BASE (MX1ADS_WDT_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_TIM1_BASE (MX1ADS_TIM1_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_TIM2_BASE (MX1ADS_TIM2_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_RTC_BASE (MX1ADS_RTC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_LCDC_BASE (MX1ADS_LCDC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_UART1_BASE (MX1ADS_UART1_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_UART2_BASE (MX1ADS_UART2_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_PWM_BASE (MX1ADS_PWM_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_DMAC_BASE (MX1ADS_DMAC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_AIPI2_BASE (MX1ADS_AIPI2_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_SIM_BASE (MX1ADS_SIM_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_USBD_BASE (MX1ADS_USBD_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_SPI1_BASE (MX1ADS_SPI1_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_MMC_BASE (MX1ADS_MMC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_ASP_BASE (MX1ADS_ASP_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_BTA_BASE (MX1ADS_BTA_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_I2C_BASE (MX1ADS_I2C_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_SSI_BASE (MX1ADS_SSI_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_SPI2_BASE (MX1ADS_SPI2_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_MSHC_BASE (MX1ADS_MSHC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_PLL_BASE (MX1ADS_PLL_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_GPIO_BASE (MX1ADS_GPIO_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_EIM_BASE (MX1ADS_EIM_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_SDRAMC_BASE (MX1ADS_SDRAMC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_MMA_BASE (MX1ADS_MMA_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_AITC_BASE (MX1ADS_AITC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_CSI_BASE (MX1ADS_CSI_OFFSET + MX1ADS_IO_BASE)
-
-/*
- * MX1 Interrupt numbers
- *
- */
-#define INT_SOFTINT 0
-#define CSI_INT 6
-#define DSPA_MAC_INT 7
-#define DSPA_INT 8
-#define COMP_INT 9
-#define MSHC_XINT 10
-#define GPIO_INT_PORTA 11
-#define GPIO_INT_PORTB 12
-#define GPIO_INT_PORTC 13
-#define LCDC_INT 14
-#define SIM_INT 15
-#define SIM_DATA_INT 16
-#define RTC_INT 17
-#define RTC_SAMINT 18
-#define UART2_MINT_PFERR 19
-#define UART2_MINT_RTS 20
-#define UART2_MINT_DTR 21
-#define UART2_MINT_UARTC 22
-#define UART2_MINT_TX 23
-#define UART2_MINT_RX 24
-#define UART1_MINT_PFERR 25
-#define UART1_MINT_RTS 26
-#define UART1_MINT_DTR 27
-#define UART1_MINT_UARTC 28
-#define UART1_MINT_TX 29
-#define UART1_MINT_RX 30
-#define VOICE_DAC_INT 31
-#define VOICE_ADC_INT 32
-#define PEN_DATA_INT 33
-#define PWM_INT 34
-#define SDHC_INT 35
-#define I2C_INT 39
-#define CSPI_INT 41
-#define SSI_TX_INT 42
-#define SSI_TX_ERR_INT 43
-#define SSI_RX_INT 44
-#define SSI_RX_ERR_INT 45
-#define TOUCH_INT 46
-#define USBD_INT0 47
-#define USBD_INT1 48
-#define USBD_INT2 49
-#define USBD_INT3 50
-#define USBD_INT4 51
-#define USBD_INT5 52
-#define USBD_INT6 53
-#define BTSYS_INT 55
-#define BTTIM_INT 56
-#define BTWUI_INT 57
-#define TIMER2_INT 58
-#define TIMER1_INT 59
-#define DMA_ERR 60
-#define DMA_INT 61
-#define GPIO_INT_PORTD 62
-
-#define MAXIRQNUM 62
-#define MAXFIQNUM 62
-#define MAXSWINUM 62
-
-#define TICKS_PER_uSEC 24
-
-/*
- * These are useconds NOT ticks.
- *
- */
-#define mSEC_1 1000
-#define mSEC_5 (mSEC_1 * 5)
-#define mSEC_10 (mSEC_1 * 10)
-#define mSEC_25 (mSEC_1 * 25)
-#define SEC_1 (mSEC_1 * 1000)
-
-#endif
diff --git a/include/mpc824x.h b/include/mpc824x.h
index 0cd7898e139..30fc795382f 100644
--- a/include/mpc824x.h
+++ b/include/mpc824x.h
@@ -297,6 +297,7 @@
#define PBESR 0x800000c7 /* PCI Bus Error Status Register */
#define PBEAR 0x800000c8 /* Processor/PCI Bus Error Status Register */
#define AMBOR 0x800000e0 /* Address Map B Options Register */
+#define PCMBCR 0x800000e1 /* PCI/Memory Buffer Configuration */
#define MCCR1 0x800000f0 /* Memory Control Configuration Register 1 */
#define MCCR2 0x800000f4 /* Memory Control Configuration Register 2 */
#define MCCR3 0x800000f8 /* Memory Control Configuration Register 3 */
diff --git a/include/serial.h b/include/serial.h
new file mode 100644
index 00000000000..c206540cc65
--- /dev/null
+++ b/include/serial.h
@@ -0,0 +1,30 @@
+#ifndef __SERIAL_H__
+#define __SERIAL_H__
+
+#define NAMESIZE 16
+#define CTLRSIZE 8
+
+struct serial_device {
+ char name[NAMESIZE];
+ char ctlr[CTLRSIZE];
+
+ int (*init) (void);
+ void (*setbrg) (void);
+ int (*getc) (void);
+ int (*tstc) (void);
+ void (*putc) (const char c);
+ void (*puts) (const char *s);
+
+ struct serial_device *next;
+};
+
+extern struct serial_device serial_smc_device;
+extern struct serial_device serial_scc_device;
+extern struct serial_device * default_serial_console (void);
+
+extern void serial_initialize(void);
+extern void serial_devices_init(void);
+extern int serial_assign(char * name);
+extern void serial_reinit_all(void);
+
+#endif
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 9cffb4ec24c..6f8c7fec6ff 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -250,6 +250,9 @@ void start_armboot (void)
#endif /* CONFIG_VFD */
#ifdef CONFIG_LCD
+# ifndef PAGE_SIZE
+# define PAGE_SIZE 4096
+# endif
/*
* reserve memory for LCD display (always full pages)
*/
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 42b467131fa..97753b3139a 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -48,6 +48,7 @@
#include <status_led.h>
#endif
#include <net.h>
+#include <serial.h>
#ifdef CFG_ALLOC_DPRAM
#if !(defined(CONFIG_8260)||defined(CONFIG_MPC8560))
#include <commproc.h>
@@ -582,6 +583,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
monitor_flash_len = (ulong)&__init_end - dest_addr;
+#ifdef CONFIG_SERIAL_MULTI
+ serial_initialize();
+#endif
+
/*
* We have to relocate the command table manually
*/
@@ -872,7 +877,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
defined(CONFIG_IP860) || \
defined(CONFIG_IVML24) || \
defined(CONFIG_IVMS8) || \
- defined(CONFIG_LWMON) || \
defined(CONFIG_MPC8260ADS) || \
defined(CONFIG_MPC8266ADS) || \
defined(CONFIG_MPC8560ADS) || \
diff --git a/post/ether.c b/post/ether.c
index 47aa3526b8f..660620e8f62 100644
--- a/post/ether.c
+++ b/post/ether.c
@@ -49,6 +49,7 @@
#include <command.h>
#include <net.h>
+#include <serial.h>
#define MIN_PACKET_LENGTH 64
#define MAX_PACKET_LENGTH 256
@@ -77,8 +78,6 @@ static struct {
static char *ctlr_name[1] = { "SCC" };
-static int used_by_uart[1] = { -1 };
-
/* Ethernet Transmit and Receive Buffers */
#define DBUF_LENGTH 1520
@@ -458,6 +457,7 @@ static void scc_halt (int scc_index)
immr->im_cpm.cp_scc[scc_index].scc_gsmrl &=
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ immr->im_ioport.iop_pcso &= ~(PC_ENET_CLSN | PC_ENET_RENA);
}
static int scc_send (int index, volatile void *packet, int length)
@@ -513,7 +513,7 @@ static int scc_recv (int index, void *packet, int max_length)
rxIdx++;
}
- Done:
+Done:
return length;
}
@@ -579,16 +579,10 @@ static int test_ctlr (int ctlr, int index)
res = 0;
- Done:
+Done:
ctlr_proc[ctlr].halt (index);
-#if !defined(CONFIG_8xx_CONS_NONE)
- if (used_by_uart[ctlr] == index) {
- serial_init ();
- }
-#endif
-
/*
* SCC2 Ethernet parameter RAM space overlaps
* the SPI parameter RAM space. So we need to restore
@@ -614,16 +608,6 @@ int ether_post_test (int flags)
int res = 0;
int i;
-#if defined(CONFIG_8xx_CONS_SCC1)
- used_by_uart[CTLR_SCC] = 0;
-#elif defined(CONFIG_8xx_CONS_SCC2)
- used_by_uart[CTLR_SCC] = 1;
-#elif defined(CONFIG_8xx_CONS_SCC3)
- used_by_uart[CTLR_SCC] = 2;
-#elif defined(CONFIG_8xx_CONS_SCC4)
- used_by_uart[CTLR_SCC] = 3;
-#endif
-
ctlr_proc[CTLR_SCC].init = scc_init;
ctlr_proc[CTLR_SCC].halt = scc_halt;
ctlr_proc[CTLR_SCC].send = scc_send;
@@ -635,6 +619,9 @@ int ether_post_test (int flags)
}
}
+#if !defined(CONFIG_8xx_CONS_NONE)
+ serial_reinit_all ();
+#endif
return res;
}
diff --git a/post/uart.c b/post/uart.c
index f6936ca7fcd..23bf036ba48 100644
--- a/post/uart.c
+++ b/post/uart.c
@@ -48,7 +48,7 @@
#error "Apparently a bad configuration, please fix."
#endif
#include <command.h>
-#include <net.h>
+#include <serial.h>
#define CTLR_SMC 0
#define CTLR_SCC 1
@@ -65,14 +65,13 @@ static int ctlr_list[][2] = { };
static struct {
void (*init) (int index);
+ void (*halt) (int index);
void (*putc) (int index, const char c);
int (*getc) (int index);
} ctlr_proc[2];
static char *ctlr_name[2] = { "SMC", "SCC" };
-static int used_by_uart[2] = { -1, -1 };
-
static int proff_smc[] = { PROFF_SMC1, PROFF_SMC2 };
static int proff_scc[] =
{ PROFF_SCC1, PROFF_SCC2, PROFF_SCC3, PROFF_SCC4 };
@@ -212,6 +211,10 @@ static void smc_init (int smc_index)
sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
}
+static void smc_halt(int smc_index)
+{
+}
+
static void smc_putc (int smc_index, const char c)
{
volatile cbd_t *tbdf;
@@ -419,6 +422,15 @@ static void scc_init (int scc_index)
sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
+static void scc_halt(int scc_index)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+ volatile scc_t *sp = (scc_t *) & (cp->cp_scc[scc_index]);
+
+ sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT | SCC_GSMRL_DIAG_LE);
+}
+
static void scc_putc (int scc_index, const char c)
{
volatile cbd_t *tbdf;
@@ -496,12 +508,6 @@ static int test_ctlr (int ctlr, int index)
char test_str[] = "*** UART Test String ***\r\n";
int i;
-#if !defined(CONFIG_8xx_CONS_NONE)
- if (used_by_uart[ctlr] == index) {
- while (ctlr_proc[ctlr].getc (index) != -1);
- }
-#endif
-
ctlr_proc[ctlr].init (index);
for (i = 0; i < sizeof (test_str) - 1; i++) {
@@ -512,13 +518,8 @@ static int test_ctlr (int ctlr, int index)
res = 0;
- Done:
-
-#if !defined(CONFIG_8xx_CONS_NONE)
- if (used_by_uart[ctlr] == index) {
- serial_init ();
- }
-#endif
+Done:
+ ctlr_proc[ctlr].halt (index);
if (res != 0) {
post_log ("uart %s%d test failed\n",
@@ -533,25 +534,13 @@ int uart_post_test (int flags)
int res = 0;
int i;
-#if defined(CONFIG_8xx_CONS_SMC1)
- used_by_uart[CTLR_SMC] = 0;
-#elif defined(CONFIG_8xx_CONS_SMC2)
- used_by_uart[CTLR_SMC] = 1;
-#elif defined(CONFIG_8xx_CONS_SCC1)
- used_by_uart[CTLR_SCC] = 0;
-#elif defined(CONFIG_8xx_CONS_SCC2)
- used_by_uart[CTLR_SCC] = 1;
-#elif defined(CONFIG_8xx_CONS_SCC3)
- used_by_uart[CTLR_SCC] = 2;
-#elif defined(CONFIG_8xx_CONS_SCC4)
- used_by_uart[CTLR_SCC] = 3;
-#endif
-
ctlr_proc[CTLR_SMC].init = smc_init;
+ ctlr_proc[CTLR_SMC].halt = smc_halt;
ctlr_proc[CTLR_SMC].putc = smc_putc;
ctlr_proc[CTLR_SMC].getc = smc_getc;
ctlr_proc[CTLR_SCC].init = scc_init;
+ ctlr_proc[CTLR_SCC].halt = scc_halt;
ctlr_proc[CTLR_SCC].putc = scc_putc;
ctlr_proc[CTLR_SCC].getc = scc_getc;
@@ -561,6 +550,10 @@ int uart_post_test (int flags)
}
}
+#if !defined(CONFIG_8xx_CONS_NONE)
+ serial_reinit_all ();
+#endif
+
return res;
}