summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-02-23 19:30:57 +0000
committerwdenk <wdenk>2004-02-23 19:30:57 +0000
commit2d1a537d87727907bf4d888760cba4abc0b52ad3 (patch)
tree29deb37d04cc84308f57ec4274bea7efad743536
parent3f85ce27858c44ee75d3650a53154ebcec0e24f2 (diff)
* Patch by Thomas Elste, 10 Feb 2004:
Add support for NET+50 CPU and ModNET50 board * Patch by Sam Song, 10 Feb 2004: Fix typos in cfi_flash.c * Patch by Leon Kukovec, 10 Feb 2004 Fixed long dir entry slot id calculation in get_vfatname * Patch by Robin Gilks, 10 Feb 2004: add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==, !=, <>, <, >, <=, >=)
-rw-r--r--CHANGELOG13
-rw-r--r--Makefile3
-rw-r--r--README1
-rw-r--r--board/modnet50/Makefile47
-rw-r--r--board/modnet50/config.mk29
-rw-r--r--board/modnet50/flash.c536
-rw-r--r--board/modnet50/memsetup.S204
-rw-r--r--board/modnet50/modnet50.c52
-rw-r--r--board/modnet50/u-boot.lds68
-rw-r--r--common/Makefile6
-rw-r--r--common/cmd_itest.c197
-rw-r--r--common/cmd_mem.c2
-rw-r--r--common/hush.c2
-rw-r--r--cpu/arm720t/Makefile2
-rw-r--r--cpu/arm720t/cpu.c4
-rw-r--r--cpu/arm720t/interrupts.c25
-rw-r--r--cpu/arm720t/serial.c4
-rw-r--r--cpu/arm720t/serial_netarm.c185
-rw-r--r--cpu/arm720t/start.S72
-rw-r--r--doc/README.commands.itest16
-rw-r--r--doc/README.modnet5062
-rw-r--r--drivers/Makefile14
-rw-r--r--drivers/cfi_flash.c7
-rw-r--r--drivers/netarm_eth.c359
-rw-r--r--drivers/netarm_eth.h42
-rw-r--r--fs/fat/fat.c11
-rw-r--r--include/asm-arm/arch-arm720t/netarm_dma_module.h184
-rw-r--r--include/asm-arm/arch-arm720t/netarm_eni_module.h121
-rw-r--r--include/asm-arm/arch-arm720t/netarm_eth_module.h160
-rw-r--r--include/asm-arm/arch-arm720t/netarm_gen_module.h170
-rw-r--r--include/asm-arm/arch-arm720t/netarm_mem_module.h158
-rw-r--r--include/asm-arm/arch-arm720t/netarm_registers.h80
-rw-r--r--include/asm-arm/arch-arm720t/netarm_ser_module.h347
-rw-r--r--include/cmd_confdefs.h1
-rw-r--r--include/configs/modnet50.h179
-rw-r--r--include/fat.h4
36 files changed, 3340 insertions, 27 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 0c324153718..b6eaa89148f 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,19 @@
Changes for U-Boot 1.0.2:
======================================================================
+* Patch by Thomas Elste, 10 Feb 2004:
+ Add support for NET+50 CPU and ModNET50 board
+
+* Patch by Sam Song, 10 Feb 2004:
+ Fix typos in cfi_flash.c
+
+* Patch by Leon Kukovec, 10 Feb 2004
+ Fixed long dir entry slot id calculation in get_vfatname
+
+* Patch by Robin Gilks, 10 Feb 2004:
+ add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
+ !=, <>, <, >, <=, >=)
+
* Fix problem with side effects in macros in include/usb.h
* Patch by David Benson, 13 Nov 2003:
diff --git a/Makefile b/Makefile
index 965b93ddf3e..3525d87dbd5 100644
--- a/Makefile
+++ b/Makefile
@@ -959,6 +959,9 @@ impa7_config : unconfig
ep7312_config : unconfig
@./mkconfig $(@:_config=) arm arm720t ep7312
+modnet50_config : unconfig
+ @./mkconfig $(@:_config=) arm arm720t modnet50
+
#########################################################################
## XScale Systems
#########################################################################
diff --git a/README b/README
index 41e99e329f8..2c568201610 100644
--- a/README
+++ b/README
@@ -644,6 +644,7 @@ The following options need to be configured:
CFG_CMD_IMLS List all found images
CFG_CMD_IMMAP * IMMR dump support
CFG_CMD_IRQ * irqinfo
+ CFG_CMD_ITEST * Integer/string test of 2 values
CFG_CMD_JFFS2 * JFFS2 Support
CFG_CMD_KGDB * kgdb
CFG_CMD_LOADB loadb
diff --git a/board/modnet50/Makefile b/board/modnet50/Makefile
new file mode 100644
index 00000000000..7dbcc1c9378
--- /dev/null
+++ b/board/modnet50/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := modnet50.o flash.o
+SOBJS := memsetup.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/modnet50/config.mk b/board/modnet50/config.mk
new file mode 100644
index 00000000000..49d4836c0ac
--- /dev/null
+++ b/board/modnet50/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x00f00000
+#CROSS_COMPILE = arm-elf-
diff --git a/board/modnet50/flash.c b/board/modnet50/flash.c
new file mode 100644
index 00000000000..fc04d9124ea
--- /dev/null
+++ b/board/modnet50/flash.c
@@ -0,0 +1,536 @@
+/*
+ * (C) Copyright 2002
+ * MAZeT GmbH <www.mazet.de>
+ * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
+ *
+ * The most stuff comes from PPCBoot and Linux.
+ *
+ * IMMS gGmbH <www.imms.de>
+ * Thomas Elste <info@elste.org>
+ *
+ * Modifications for ModNET50 Board
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/netarm_registers.h>
+
+#define SCR (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_SYSTEM_CONTROL))
+
+#define ALIGN_ABORT_OFF SCR = SCR & ~NETARM_GEN_SYS_CFG_ALIGN_ABORT
+#define ALIGN_ABORT_ON SCR = SCR | NETARM_GEN_SYS_CFG_ALIGN_ABORT
+
+#define PROG_ADDR (0x555*2)
+#define SETUP_ADDR (0x555*2)
+#define ID_ADDR (0x555*2)
+#define UNLOCK_ADDR1 (0x555*2)
+#define UNLOCK_ADDR2 (0x2AA*2)
+
+#define UNLOCK_CMD1 (0xAA)
+#define UNLOCK_CMD2 (0x55)
+#define ERASE_SUSPEND_CMD (0xB0)
+#define ERASE_RESUME_CMD (0x30)
+#define RESET_CMD (0xF0)
+#define ID_CMD (0x90)
+#define SECERASE_CMD (0x30)
+#define CHIPERASE_CMD (0x10)
+#define PROG_CMD (0xa0)
+#define SETUP_CMD (0x80)
+
+#define DQ2 (0x04)
+#define DQ3 (DQ2*2)
+#define DQ5 (DQ3*4)
+#define DQ6 (DQ5*2)
+
+#define WRITE_UNLOCK(addr) { \
+ *(volatile __u16*)(addr + UNLOCK_ADDR1) = (__u16)UNLOCK_CMD1; \
+ *(volatile __u16*)(addr + UNLOCK_ADDR2) = (__u16)UNLOCK_CMD2; \
+}
+
+#define CONFIG_AM29_RESERVED (0)
+#define K (1024)
+#define MB (4)
+
+#define CELL_SIZE (64*K)
+#define DEVICE_SIZE (MB*K*K)
+#define CELLS_PER_DEVICE (DEVICE_SIZE/CELL_SIZE)
+#define RESERVED_CELLS (CONFIG_AM29_RESERVED*K)/CELL_SIZE
+#define MAX_FLASH_DEVICES (1)
+#define AVAIL_SIZE (DEVICE_SIZE*MAX_FLASH_DEVICES - RESERVED_CELLS*CELL_SIZE)
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+static __u16 toggling_bits;
+
+
+/*-----------------------------------------------------------------------
+ */
+ulong flash_get_size (ulong baseaddr, flash_info_t * info)
+{
+ short i;
+ __u16 flashtest;
+
+ /* Write auto select command sequence and test FLASH answer */
+ WRITE_UNLOCK (baseaddr);
+ *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD;
+ flashtest /* manufacturer ID */ = *(volatile __u16 *) (baseaddr);
+ *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD;
+
+ switch ((__u32) ((flashtest << 16) + flashtest)) {
+ case AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD & FLASH_VENDMASK;
+ break;
+ case FUJ_MANUFACT:
+ info->flash_id = FLASH_MAN_FUJ & FLASH_VENDMASK;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ /* Write auto select command sequence and test FLASH answer */
+ WRITE_UNLOCK (baseaddr);
+ *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD;
+ flashtest /* device ID */ = *(volatile __u16 *) (baseaddr + 2);
+ *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD;
+
+ /* toggling_bits = (flashtest == TOSHIBA)?(DQ6):(DQ2|DQ6); */
+ toggling_bits = (DQ2 | DQ6);
+
+ switch ((__u32) ((flashtest << 16) + flashtest)) {
+ case AMD_ID_LV160B:
+ info->flash_id +=
+ (FLASH_AM160LV | FLASH_AM160B) & FLASH_TYPEMASK;
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ info->size = CFG_FLASH_SIZE;
+ /* 1*16K Boot Block
+ 2*8K Parameter Block
+ 1*32K Small Main Block */
+ info->start[0] = baseaddr;
+ info->start[1] = baseaddr + 0x4000;
+ info->start[2] = baseaddr + 0x6000;
+ info->start[3] = baseaddr + 0x8000;
+ for (i = 1; i < info->sector_count; i++)
+ info->start[3 + i] = baseaddr + i * CFG_MAIN_SECT_SIZE;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* no or unknown flash */
+ }
+
+ for (i = 0; i < info->sector_count; i++) {
+ /* Write auto select command sequence and test FLASH answer */
+ WRITE_UNLOCK (info->start[i]);
+ *(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) ID_CMD;
+ flashtest /* protected verify */ = *(volatile __u16 *) (info->start[i] + 4);
+ *(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) RESET_CMD;
+ if (flashtest & 0x0001) {
+ info->protect[i] = 1; /* D0 = 1 if protected */
+ } else {
+ info->protect[i] = 0;
+ }
+ }
+ return (info->size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+ulong flash_init (void)
+{
+ ulong size = 0;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here (only one bank) */
+ size = flash_get_size (CFG_FLASH_BASE, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN || size == 0) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size, size >> 20);
+ }
+
+ /*
+ * protect monitor and environment sectors
+ */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ printf ("AMD ");
+ break;
+ case FLASH_MAN_FUJ:
+ printf ("Fujitsu ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AMDL323B:
+ printf ("29DL323B (32 M, bottom sector)\n");
+ break;
+ case (FLASH_AM160LV | FLASH_AM160B):
+ printf ("29LV160BE (1M x 16, bottom sector)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 4) == 0)
+ printf ("\n ");
+ printf (" S%02d @ 0x%08lX%s", i,
+ info->start[i], info->protect[i] ? " !" : " ");
+ }
+ printf ("\n");
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_check_protection (flash_info_t * info, int s_first, int s_last)
+{
+ int sect, prot = 0;
+
+ for (sect = s_first; sect <= s_last; sect++)
+ if (info->protect[sect])
+ prot++;
+ if (prot)
+ printf ("- can't erase %d protected sectors\n", prot);
+ return prot;
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_check_erase_amd (ulong start)
+{
+ __u16 v1, v2;
+
+ v1 = *(volatile __u16 *) (start);
+ v2 = *(volatile __u16 *) (start);
+
+ if (((v1 ^ v2) & toggling_bits) == toggling_bits) {
+ if (((v1 | v2) & DQ5) == DQ5) {
+ printf ("[DQ5] ");
+ /* OOPS: exceeded timing limits */
+
+ v1 = *(volatile __u16 *) (start);
+ v2 = *(volatile __u16 *) (start);
+
+ if (((v1 ^ v2) & toggling_bits) == toggling_bits) {
+
+ printf ("[%s] ",
+ ((toggling_bits & (DQ2 | DQ6)) ==
+ (DQ2 | DQ6)) ? "DQ2,DQ6" : "DQ6");
+
+ /* OOPS: there is an erasure in progress,
+ * try to reset chip */
+ *(volatile __u16 *) (start) =
+ (__u16) RESET_CMD;
+
+ return 1; /* still busy */
+ }
+ }
+ return 1; /* still busy */
+ }
+ return 0; /* be free */
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ int flag, sect, setup_offset = 0;
+ int rc = ERR_OK;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ return ERR_UNKNOWN_FLASH_TYPE;
+ }
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ printf ("- no sectors to erase\n");
+ return ERR_INVAL;
+ }
+
+ if (flash_check_protection (info, s_first, s_last))
+ return ERR_PROTECTED;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_FUJ:
+ case FLASH_MAN_AMD:
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (FLASH_AM160LV | FLASH_AM160B):
+ setup_offset = UNLOCK_ADDR1; /* just the adress for setup_cmd differs */
+ case FLASH_AMDL323B:
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ flag = disable_interrupts ();
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last && !ctrlc ();
+ sect++) {
+ printf ("Erasing sector %2d ... ", sect);
+
+ if (info->protect[sect] == 0) {
+ /* not protected */
+ /* Write sector erase command sequence */
+ WRITE_UNLOCK (info->start[0]);
+ *(volatile __u16 *) (info->start[0] +
+ setup_offset) =
+ (__u16) SETUP_CMD;
+ WRITE_UNLOCK (info->start[0]);
+ *(volatile __u16 *) (info->
+ start[sect]) =
+ (__u16) SECERASE_CMD;
+
+ /* wait some time */
+ reset_timer_masked ();
+ while (get_timer_masked () < 1000) {
+ }
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+ while (flash_check_erase_amd (info->start[sect])) {
+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ printf ("timeout!\n");
+ /* OOPS: reach timeout,
+ * try to reset chip
+ */
+ *(volatile __u16 *) (info-> start[sect]) = (__u16) RESET_CMD;
+ rc = ERR_TIMOUT;
+ goto outahere_323B;
+ }
+ }
+ printf ("ok.\n");
+ } else {
+ printf ("protected!\n");
+ }
+ }
+ if (ctrlc ())
+ printf ("User Interrupt!\n");
+outahere_323B:
+ /* allow flash to settle - wait 10 ms */
+ udelay_masked (10000);
+ if (flag)
+ enable_interrupts ();
+ return rc;
+ default:
+ printf ("- unknown chip type\n");
+ return ERR_UNKNOWN_FLASH_TYPE;
+ }
+ break;
+ default:
+ printf ("- unknown vendor ");
+ return ERR_UNKNOWN_FLASH_VENDOR;
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_check_write_amd (ulong dest)
+{
+ __u16 v1, v2;
+
+ v1 = *(volatile __u16 *) (dest);
+ v2 = *(volatile __u16 *) (dest);
+
+ /* DQ6 toggles during write */
+ if (((v1 ^ v2) & DQ6) == DQ6) {
+ if (((v1 | v2) & DQ5) == DQ5) {
+ printf ("[DQ5] @ %08lX\n", dest);
+
+ /* OOPS: exceeded timing limits,
+ * try to reset chip */
+ *(volatile __u16 *) (dest) = (__u16) RESET_CMD;
+ return 0; /* be free */
+ }
+ return 1; /* still busy */
+ }
+
+ return 0; /* be free */
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+static int write_word (flash_info_t * info, ulong dest, ushort data)
+{
+ int rc = ERR_OK;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*(__u16 *) (dest) & data) != data)
+ return ERR_NOT_ERASED;
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ flag = disable_interrupts ();
+
+ /* Write program command sequence */
+ WRITE_UNLOCK (info->start[0]);
+
+ /* Flash dependend program seqence */
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_FUJ:
+ case FLASH_MAN_AMD:
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (FLASH_AM160LV | FLASH_AM160B):
+ *(volatile __u16 *) (info->start[0] + UNLOCK_ADDR1) =
+ (__u16) PROG_CMD;
+ *(volatile __u16 *) (dest) = (__u16) data;
+ break;
+ case FLASH_AMDL323B:
+ *(volatile __u16 *) (dest) = (__u16) PROG_CMD;
+ *(volatile __u16 *) (dest) = (__u16) data;
+ break;
+ }
+ }
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ while (flash_check_write_amd (dest)) {
+ if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ printf ("timeout! @ %08lX\n", dest);
+ /* OOPS: reach timeout,
+ * try to reset chip */
+ *(volatile __u16 *) (dest) = (__u16) RESET_CMD;
+
+ rc = ERR_TIMOUT;
+ goto outahere_323B;
+ }
+ }
+
+ /* Check if Flash was (accurately) written */
+ if (*(__u16 *) (dest) != data)
+ rc = ERR_PROG_ERROR;
+
+outahere_323B:
+ if (flag)
+ enable_interrupts ();
+ return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ ushort data;
+ int l;
+ int i, rc;
+
+ wp = (addr & ~1); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 8);
+ }
+ for (; i < 2 && cnt > 0; ++i) {
+ data = (data >> 8) | (*src++ << 8);
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 2; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 8);
+ }
+
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 2;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 2) {
+ data = *((ushort *) src);
+ if ((rc = write_word (info, wp, data)) != 0)
+ return (rc);
+ src += 2;
+ wp += 2;
+ cnt -= 2;
+ }
+
+ if (cnt == 0)
+ return ERR_OK;
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
+ data = (data >> 8) | (*src++ << 8);
+ --cnt;
+ }
+ for (; i < 2; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 8);
+ }
+
+ return write_word (info, wp, data);
+}
diff --git a/board/modnet50/memsetup.S b/board/modnet50/memsetup.S
new file mode 100644
index 00000000000..674b1d2e058
--- /dev/null
+++ b/board/modnet50/memsetup.S
@@ -0,0 +1,204 @@
+/*
+ * Memory Setup stuff - taken from Linux
+ *
+ * Copyright (c) 2002 Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
+ * (c) 2004 IMMS gGmbH <www.imms.de>, Thomas Elste <info@elste.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/netarm_registers.h>
+
+
+/* some parameters for the board */
+#define FLASH_90ns_WAIT_STATES ((NETARM_PLL_COUNT_VAL + 2) / 3)
+#define FLASH_70ns_WAIT_STATES 4
+
+#define NETARM_MMAP_CS0_BASE (PHYS_FLASH_1)
+#if 1
+#define NETARM_MMAP_CS0_MASK (~(PHYS_FLASH_1_SIZE - 1))
+#else
+#define NETARM_MMAP_CS0_MASK (~(1000000 - 1))
+#endif
+#define NETARM_MMAP_CS1_BASE (PHYS_SDRAM_1)
+#define NETARM_MMAP_CS1_MASK (~(PHYS_SDRAM_1_SIZE - 1))
+#define NETARM_MMAP_CS2_BASE (PHYS_SDRAM_2)
+#define NETARM_MMAP_CS2_MASK (~(PHYS_SDRAM_2_SIZE - 1))
+#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE)
+#define NETARM_MMAP_CS3_BASE (PHYS_NVRAM_1)
+#define NETARM_MMAP_CS3_MASK (~(PHYS_NVRAM_SIZE - 1))
+#endif
+#define NETARM_MMAP_CS4_BASE (PHYS_EXT_1)
+#define NETARM_MMAP_CS4_MASK (~(PHYS_EXT_SIZE - 1))
+
+/* setting up the memory */
+.globl memsetup
+memsetup:
+
+#if defined(CONFIG_MODNET50)
+ ldr pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - TEXT_BASE)
+
+_jump_to_high:
+ /*
+ * MEM Config Reg
+ * ---------------------------------------------------
+ */
+ ldr r0, =NETARM_MEM_MODULE_BASE
+ ldr r1, =( NETARM_MEM_REFR_PERIOD_USEC(16) | \
+ NETARM_MEM_CFG_REFRESH_EN | \
+ NETARM_MEM_CFG_REFR_CYCLE_5CLKS )
+ str r1, [r0, #+NETARM_MEM_MODULE_CONFIG]
+
+
+memsetup_cs0:
+ /*
+ * Base Addr / Option Reg 0 (Flash)
+ * ---------------------------------------------------
+ */
+ ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS0_BASE) | \
+ NETARM_MEM_BAR_DRAM_FP | \
+ NETARM_MEM_BAR_DRAM_MUX_INT | \
+ NETARM_MEM_BAR_DRAM_MUX_BAL | \
+ NETARM_MEM_BAR_VALID )
+ str r1, [r0, #+NETARM_MEM_CS0_BASE_ADDR]
+
+ /* trust that the bus size for flash was strapped correctly */
+ /* this saves the bus width in r2 and then ORs it back in */
+ /* it's pretty safe assumption, otherwise it wouldn't boot */
+ ldr r2, [r0, #+NETARM_MEM_CS0_OPTIONS]
+ and r2, r2, #NETARM_MEM_OPT_BUS_SIZE_MASK
+
+/* just a test: assume 32 bit flash mem */
+/* mov r2, #NETARM_MEM_OPT_32BIT */
+
+ ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS0_MASK) | \
+ NETARM_MEM_OPT_WAIT_STATES(FLASH_70ns_WAIT_STATES) | \
+ NETARM_MEM_OPT_BCYC_4 | \
+ NETARM_MEM_OPT_BSIZE_16 | \
+ NETARM_MEM_OPT_16BIT | \
+ NETARM_MEM_OPT_READ_ASYNC | \
+ NETARM_MEM_OPT_WRITE_ASYNC )
+
+ orr r1, r1, r2
+ str r1, [r0, #+NETARM_MEM_CS0_OPTIONS]
+
+
+memsetup_cs1:
+ /*
+ * Base Addr / Option Reg 1 (DRAM #1)
+ * ---------------------------------------------------
+ */
+#ifdef CONFIG_NETARM_NET40_REV2
+ /* we have to config SDRAM in burst mode */
+ ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \
+ NETARM_MEM_OPT_BCYC_2 | \
+ NETARM_MEM_OPT_BSIZE_16 | \
+ NETARM_MEM_OPT_WAIT_STATES(0) | \
+ NETARM_MEM_OPT_32BIT | \
+ NETARM_MEM_OPT_READ_ASYNC | \
+ NETARM_MEM_OPT_WRITE_ASYNC )
+ str r1, [r0, #+NETARM_MEM_CS1_OPTIONS]
+
+ ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \
+ NETARM_MEM_BAR_DRAM_SYNC | \
+ NETARM_MEM_BAR_DRAM_MUX_INT | \
+ NETARM_MEM_BAR_DRAM_MUX_UNBAL | \
+ NETARM_MEM_BAR_DRAM_SEL | \
+ NETARM_MEM_BAR_BURST_EN | \
+ NETARM_MEM_BAR_VALID )
+ str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR]
+#else
+ /* we have to config FPDRAM in burst mode with smaller burst access size */
+ ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \
+ NETARM_MEM_OPT_BCYC_2 | \
+ NETARM_MEM_OPT_BSIZE_16 | \
+ NETARM_MEM_OPT_WAIT_STATES(0) | \
+ NETARM_MEM_OPT_32BIT | \
+ NETARM_MEM_OPT_READ_ASYNC | \
+ NETARM_MEM_OPT_WRITE_ASYNC )
+ str r1, [r0, #+NETARM_MEM_CS1_OPTIONS]
+
+ ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \
+ NETARM_MEM_BAR_DRAM_SYNC | \
+ NETARM_MEM_BAR_DRAM_MUX_INT | \
+ NETARM_MEM_BAR_DRAM_MUX_UNBAL | \
+ NETARM_MEM_BAR_DRAM_SEL | \
+ NETARM_MEM_BAR_BURST_EN | \
+ NETARM_MEM_BAR_VALID )
+ str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR]
+
+#endif /* CONFIG_NETARM_NET40_REV2 */
+
+
+memsetup_cs3:
+ /*
+ * Base Addr / Option Reg 3 (EEPROM, NVRAM)
+ * ---------------------------------------------------
+ */
+#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE)
+ ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS3_MASK) | \
+ NETARM_MEM_OPT_BCYC_3 | \
+ NETARM_MEM_OPT_BSIZE_2 | \
+ NETARM_MEM_OPT_WAIT_STATES(10) | \
+ NETARM_MEM_OPT_8BIT | \
+ NETARM_MEM_OPT_READ_ASYNC | \
+ NETARM_MEM_OPT_WRITE_ASYNC )
+ str r1, [r0, #+NETARM_MEM_CS3_OPTIONS]
+
+ ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS3_BASE) | \
+ NETARM_MEM_BAR_DRAM_FP | \
+ NETARM_MEM_BAR_DRAM_MUX_INT | \
+ NETARM_MEM_BAR_DRAM_MUX_BAL | \
+ NETARM_MEM_BAR_VALID )
+ str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR]
+#else
+ /* we don't need EEPROM --> no config */
+ ldr r1, =( 0 )
+ str r1, [r0, #+NETARM_MEM_CS3_OPTIONS]
+
+ ldr r1, =( 0 )
+ str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR]
+#endif
+
+
+#else
+/*
+#error "missing CONFIG_MODNET50 (see your config.h)"
+*/
+#endif /* CONFIG_MODNET50 */
+
+
+memsetup_end:
+ /*
+ * manipulate address in lr and ip to match new
+ * address space
+ */
+ ldr r3, =(NETARM_MMAP_CS0_BASE)
+ mov r0, lr
+ add r0, r3, r0
+ mov lr, r0
+ mov r0, ip
+ add r0, r3, r0
+ mov ip, r0
+
+ /* everything is fine now */
+ mov pc, lr
diff --git a/board/modnet50/modnet50.c b/board/modnet50/modnet50.c
new file mode 100644
index 00000000000..448c6233e9c
--- /dev/null
+++ b/board/modnet50/modnet50.c
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ /* address for the kernel command line */
+ gd->bd->bi_boot_params = 0x800;
+ return 0;
+}
+
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ if (CONFIG_NR_DRAM_BANKS == 2) {
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+ }
+ return (0);
+}
diff --git a/board/modnet50/u-boot.lds b/board/modnet50/u-boot.lds
new file mode 100644
index 00000000000..ac09f5fb7c0
--- /dev/null
+++ b/board/modnet50/u-boot.lds
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm720t/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/common/Makefile b/common/Makefile
index 66cb9ed8834..eccb4e46f09 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -34,7 +34,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o \
cmd_date.o cmd_dcr.o cmd_diag.o cmd_doc.o cmd_dtt.o \
cmd_eeprom.o cmd_elf.o \
cmd_fat.o cmd_fdc.o cmd_fdos.o cmd_flash.o cmd_fpga.o \
- cmd_i2c.o cmd_ide.o cmd_immap.o cmd_jffs2.o \
+ cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \
cmd_load.o cmd_log.o \
cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \
cmd_nand.o cmd_net.o cmd_nvedit.o \
@@ -44,10 +44,10 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o \
environment.o env_common.o \
env_dataflash.o env_flash.o env_eeprom.o env_nvram.o env_nowhere.o exports.o \
flash.o fpga.o \
- hush.o kgdb.o lists.o lynxkdi.o miiphybb.o miiphyutil.o \
+ hush.o kgdb.o lists.o lynxkdi.o memsize.o miiphybb.o miiphyutil.o \
s_record.o soft_i2c.o soft_spi.o spartan2.o \
usb.o usb_kbd.o usb_storage.o \
- virtex2.o xilinx.o memsize.o
+ virtex2.o xilinx.o
OBJS = $(AOBJS) $(COBJS)
diff --git a/common/cmd_itest.c b/common/cmd_itest.c
new file mode 100644
index 00000000000..9e920c9bdc7
--- /dev/null
+++ b/common/cmd_itest.c
@@ -0,0 +1,197 @@
+/*
+ * (C) Copyright 2003
+ * Tait Electronics Limited, Christchurch, New Zealand
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file provides a shell like 'test' function to return
+ * true/false from an integer or string compare of two memory
+ * locations or a location and a scalar/literal.
+ * A few parts were lifted from bash 'test' command
+ */
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+
+#define EQ 0
+#define NE 1
+#define LT 2
+#define GT 3
+#define LE 4
+#define GE 5
+
+struct op_tbl_s {
+ char *op; /* operator string */
+ int opcode; /* internal representation of opcode */
+};
+
+typedef struct op_tbl_s op_tbl_t;
+
+op_tbl_t op_table [] = {
+ { "-lt", LT },
+ { "<" , LT },
+ { "-gt", GT },
+ { ">" , GT },
+ { "-eq", EQ },
+ { "==" , EQ },
+ { "-ne", NE },
+ { "!=" , NE },
+ { "<>" , NE },
+ { "-ge", GE },
+ { ">=" , GE },
+ { "-le", LE },
+ { "<=" , LE },
+};
+
+#define op_tbl_size (sizeof(op_table)/sizeof(op_table[0]))
+
+extern int cmd_get_data_size(char* arg, int default_size);
+
+static long evalexp(char *s, int w)
+{
+ long l, *p;
+
+ /* if the parameter starts with a * then assume is a pointer to the value we want */
+ if (s[0] == '*') {
+ p = (long *)simple_strtoul(&s[1], NULL, 16);
+ l = *p;
+ } else {
+ l = simple_strtoul(s, NULL, 16);
+ }
+
+ return (l & ((1 << (w * 8)) - 1));
+}
+
+static char * evalstr(char *s)
+{
+ /* if the parameter starts with a * then assume a string pointer else its a literal */
+ if (s[0] == '*') {
+ return (char *)simple_strtoul(&s[1], NULL, 16);
+ } else {
+ return s;
+ }
+}
+
+static int stringcomp(char *s, char *t, int op)
+{
+ int n, p;
+ char *l, *r;
+
+ l = evalstr(s);
+ r = evalstr(t);
+
+ /* we'll do a compare based on the length of the shortest string */
+ n = min(strlen(l), strlen(r));
+
+ p = strncmp(l, r, n);
+ switch (op) {
+ case EQ: return (p == 0);
+ case NE: return (p != 0);
+ case LT: return (p < 0);
+ case GT: return (p > 0);
+ case LE: return (p <= 0);
+ case GE: return (p >= 0);
+ }
+ return (0);
+}
+
+static int arithcomp (char *s, char *t, int op, int w)
+{
+ long l, r;
+
+ l = evalexp (s, w);
+ r = evalexp (t, w);
+
+ switch (op) {
+ case EQ: return (l == r);
+ case NE: return (l != r);
+ case LT: return (l < r);
+ case GT: return (l > r);
+ case LE: return (l <= r);
+ case GE: return (l >= r);
+ }
+ return (0);
+}
+
+int binary_test (char *op, char *arg1, char *arg2, int w)
+{
+ int len, i;
+ op_tbl_t *optp;
+
+ len = strlen(op);
+
+ for (optp = (op_tbl_t *)&op_table, i = 0;
+ i < op_tbl_size;
+ optp++, i++) {
+
+ if ((strncmp (op, optp->op, len) == 0) && (len == strlen (optp->op))) {
+ if (w == 0) {
+ return (stringcomp(arg1, arg2, optp->opcode));
+ } else {
+ return (arithcomp (arg1, arg2, optp->opcode, w));
+ }
+ }
+ }
+
+ printf("Unknown operator '%s'\n", op);
+ return 0; /* op code not found */
+}
+
+/* command line interface to the shell test */
+int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
+{
+ int value, w;
+
+ /* Validate arguments */
+ if ((argc != 4)){
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ /* Check for a data width specification.
+ * Defaults to long (4) if no specification.
+ * Uses -2 as 'width' for .s (string) so as not to upset existing code
+ */
+ switch (w = cmd_get_data_size(argv[0], 4)) {
+ case 1:
+ case 2:
+ case 4:
+ value = binary_test (argv[2], argv[1], argv[3], w);
+ break;
+ case -2:
+ value = binary_test (argv[2], argv[1], argv[3], 0);
+ break;
+ case -1:
+ default:
+ puts("Invalid data width specifier\n");
+ value = 0;
+ break;
+ }
+
+ return !value;
+}
+
+U_BOOT_CMD(
+ itest, 4, 0, do_itest,
+ "itest - return true/false on integer compare\n",
+ "[.b, .w, .l, .s] [*]value1 <op> [*]value2\n"
+);
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 6ccad70fe12..0a5cca9a938 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -53,6 +53,8 @@ int cmd_get_data_size(char* arg, int default_size)
return 2;
case 'l':
return 4;
+ case 's':
+ return -2;
default:
return -1;
}
diff --git a/common/hush.c b/common/hush.c
index 7e8a80deb96..4712adcbfc2 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -2173,7 +2173,7 @@ static int set_local_var(const char *s, int flg_export)
#ifdef __U_BOOT__
if (getenv(name) != NULL) {
printf ("ERROR: "
- "There is a global environmet variable with the same name.\n");
+ "There is a global environment variable with the same name.\n");
return -1;
}
#endif
diff --git a/cpu/arm720t/Makefile b/cpu/arm720t/Makefile
index 8c950daee85..f273d929973 100644
--- a/cpu/arm720t/Makefile
+++ b/cpu/arm720t/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o
+OBJS = serial.o serial_netarm.o interrupts.o cpu.o
all: .depend $(START) $(LIB)
diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c
index 5637eb672fa..0ad5481fd22 100644
--- a/cpu/arm720t/cpu.c
+++ b/cpu/arm720t/cpu.c
@@ -106,7 +106,9 @@ int cleanup_before_linux (void)
unsigned long i;
disable_interrupts ();
-
+#ifdef CONFIG_NETARM
+ return 0;
+#endif
/* turn off I-cache */
asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
i &= ~0x1000;
diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c
index b1ee188ff1d..0291193e832 100644
--- a/cpu/arm720t/interrupts.c
+++ b/cpu/arm720t/interrupts.c
@@ -30,14 +30,24 @@
#include <clps7111.h>
#include <asm/proc-armv/ptrace.h>
+#ifdef CONFIG_NETARM
+#include <asm/arch/netarm_registers.h>
+#endif
extern void reset_cpu(ulong addr);
+#ifndef CONFIG_NETARM
/* we always count down the max. */
#define TIMER_LOAD_VAL 0xffff
-
/* macro to read the 16 bit timer */
#define READ_TIMER (IO_TC1D & 0xffff)
+#else
+#define IRQEN (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE))
+#define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL))
+#define TM2STAT (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS))
+#define TIMER_LOAD_VAL NETARM_GEN_TSTAT_CTC_MASK
+#define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK)
+#endif
#ifdef CONFIG_USE_IRQ
/* enable IRQ/FIQ interrupts */
@@ -177,6 +187,18 @@ static ulong lastdec;
int interrupt_init (void)
{
+#ifdef CONFIG_NETARM
+ /* disable all interrupts */
+ IRQEN = 0;
+
+ /* operate timer 2 in non-prescale mode */
+ TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CFG_HZ) |
+ NETARM_GEN_TCTL_ENABLE |
+ NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
+
+ /* set timer 2 counter */
+ lastdec = TIMER_LOAD_VAL;
+#else
/* disable all interrupts */
IO_INTMR1 = 0;
@@ -188,6 +210,7 @@ int interrupt_init (void)
/* set timer 1 counter */
lastdec = IO_TC1D = TIMER_LOAD_VAL;
+#endif
timestamp = 0;
return (0);
diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c
index d38ac39472c..5c6a0cc555d 100644
--- a/cpu/arm720t/serial.c
+++ b/cpu/arm720t/serial.c
@@ -31,6 +31,8 @@
#include <common.h>
#include <clps7111.h>
+#ifndef CONFIG_NETARM
+
void serial_setbrg (void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -124,3 +126,5 @@ serial_puts (const char *s)
serial_putc (*s++);
}
}
+
+#endif /* CONFIG_NETARM */
diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c
new file mode 100644
index 00000000000..8cfe049b031
--- /dev/null
+++ b/cpu/arm720t/serial_netarm.c
@@ -0,0 +1,185 @@
+/*
+ * Serial Port stuff - taken from Linux
+ *
+ * (C) Copyright 2002
+ * MAZeT GmbH <www.mazet.de>
+ * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
+ *
+ * (c) 2004
+ * IMMS gGmbH <www.imms.de>
+ * Thomas Elste <info@elste.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/netarm_registers.h>
+
+#ifdef CONFIG_NETARM
+
+#define PORTA (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA))
+#define PORTB (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB))
+
+/* wait until transmitter is ready for another character */
+#define TXWAITRDY(registers) \
+{ \
+ ulong tmo = get_timer(0) + 1 * CFG_HZ; \
+ while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 ) { \
+ if (get_timer(0) > tmo) \
+ break; \
+ } \
+}
+
+
+volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0);
+volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1);
+
+extern void _netarm_led_FAIL1(void);
+
+/*
+ * Setup both serial i/f with given baudrate
+ */
+void serial_setbrg (void)
+{
+ /* get the gd pointer */
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* set 0 ... make sure pins are configured for serial */
+ PORTA = PORTB =
+ NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
+
+ /* first turn em off */
+ serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0;
+
+ /* clear match register, we don't need it */
+ serial_reg_ch1->rx_match = serial_reg_ch2->rx_match = 0;
+
+ /* setup bit rate generator and rx buffer gap timer (1 byte only) */
+ if ((gd->baudrate >= MIN_BAUD_RATE)
+ && (gd->baudrate <= MAX_BAUD_RATE)) {
+ serial_reg_ch1->bitrate = serial_reg_ch2->bitrate =
+ NETARM_SER_BR_X16 (gd->baudrate);
+ serial_reg_ch1->rx_buf_timer = serial_reg_ch2->rx_buf_timer =
+ 0;
+ serial_reg_ch1->rx_char_timer = serial_reg_ch2->rx_char_timer =
+ NETARM_SER_RXGAP (gd->baudrate);
+ } else {
+ hang ();
+ }
+
+ /* setup port mode */
+ serial_reg_ch1->ctrl_b = serial_reg_ch2->ctrl_b =
+ ( NETARM_SER_CTLB_RCGT_EN |
+ NETARM_SER_CTLB_UART_MODE);
+ serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a =
+ ( NETARM_SER_CTLA_ENABLE |
+ NETARM_SER_CTLA_P_NONE |
+ /* see errata */
+ NETARM_SER_CTLA_2STOP |
+ NETARM_SER_CTLA_8BITS |
+ NETARM_SER_CTLA_DTR_EN |
+ NETARM_SER_CTLA_RTS_EN);
+}
+
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+int serial_init (void)
+{
+ serial_setbrg ();
+ return 0;
+}
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+ volatile unsigned char *fifo;
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ serial_putc ('\r');
+
+ fifo = (volatile unsigned char *) &(serial_reg_ch1->fifo);
+ TXWAITRDY (serial_reg_ch1);
+ *fifo = c;
+}
+
+/*
+ * Test of a single byte from the serial port. Returns 1 on success, 0
+ * otherwise.
+ */
+int serial_tstc(void)
+{
+ return serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise.
+ */
+int serial_getc (void)
+{
+ unsigned int ch_uint;
+ volatile unsigned int *fifo;
+ volatile unsigned char *fifo_char = NULL;
+ int buf_count = 0;
+
+ while (!(serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY))
+ /* NOP */ ;
+
+ fifo = (volatile unsigned int *) &(serial_reg_ch1->fifo);
+ fifo_char = (unsigned char *) &ch_uint;
+ ch_uint = *fifo;
+
+ buf_count = NETARM_SER_STATA_RXFDB (serial_reg_ch1->status_a);
+ switch (buf_count) {
+ case NETARM_SER_STATA_RXFDB_4BYTES:
+ buf_count = 4;
+ break;
+ case NETARM_SER_STATA_RXFDB_3BYTES:
+ buf_count = 3;
+ break;
+ case NETARM_SER_STATA_RXFDB_2BYTES:
+ buf_count = 2;
+ break;
+ case NETARM_SER_STATA_RXFDB_1BYTES:
+ buf_count = 1;
+ break;
+ default:
+ /* panic, be never here */
+ }
+
+ serial_reg_ch1->status_a |= NETARM_SER_STATA_RX_CLOSED;
+
+ return ch_uint & 0xff;
+}
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+#endif /* CONFIG_NETARM */
diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
index 7fe36c6ded0..791049a2f54 100644
--- a/cpu/arm720t/start.S
+++ b/cpu/arm720t/start.S
@@ -26,7 +26,9 @@
#include <config.h>
#include <version.h>
-
+#ifdef CONFIG_NETARM
+#include <asm/arch/netarm_registers.h>
+#endif
/*
*************************************************************************
@@ -195,6 +197,7 @@ SYSCON3: .word 0x80002200
#define CLKCTL_73 0x6 /* 73.728 MHz */
cpu_init_crit:
+#ifndef CONFIG_NETARM
/*
* mask all IRQs by clearing all bits in the INTMRs
*/
@@ -221,6 +224,54 @@ cpu_init_crit:
bic r0, r0, #0x0000008f @ clear bits 7, 3:0 (B--- WCAM)
orr r0, r0, #0x00000002 @ set bit 2 (A) Align
mcr p15,0,r0,c1,c0
+#else /* CONFIG_NETARM */
+ /*
+ * prior to software reset : need to set pin PORTC4 to be *HRESET
+ */
+ ldr r0, =NETARM_GEN_MODULE_BASE
+ ldr r1, =(NETARM_GEN_PORT_MODE(0x10) | \
+ NETARM_GEN_PORT_DIR(0x10))
+ str r1, [r0, #+NETARM_GEN_PORTC]
+ /*
+ * software reset : see HW Ref. Guide 8.2.4 : Software Service register
+ * for an explanation of this process
+ */
+ ldr r0, =NETARM_GEN_MODULE_BASE
+ ldr r1, =NETARM_GEN_SW_SVC_RESETA
+ str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
+ ldr r1, =NETARM_GEN_SW_SVC_RESETB
+ str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
+ ldr r1, =NETARM_GEN_SW_SVC_RESETA
+ str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
+ ldr r1, =NETARM_GEN_SW_SVC_RESETB
+ str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
+ /*
+ * setup PLL and System Config
+ */
+ ldr r0, =NETARM_GEN_MODULE_BASE
+
+ ldr r1, =( NETARM_GEN_SYS_CFG_LENDIAN | \
+ NETARM_GEN_SYS_CFG_BUSFULL | \
+ NETARM_GEN_SYS_CFG_USER_EN | \
+ NETARM_GEN_SYS_CFG_ALIGN_ABORT | \
+ NETARM_GEN_SYS_CFG_BUSARB_INT | \
+ NETARM_GEN_SYS_CFG_BUSMON_EN )
+
+ str r1, [r0, #+NETARM_GEN_SYSTEM_CONTROL]
+
+ ldr r1, =( NETARM_GEN_PLL_CTL_PLLCNT(NETARM_PLL_COUNT_VAL) | \
+ NETARM_GEN_PLL_CTL_POLTST_DEF | \
+ NETARM_GEN_PLL_CTL_INDIV(1) | \
+ NETARM_GEN_PLL_CTL_ICP_DEF | \
+ NETARM_GEN_PLL_CTL_OUTDIV(2) )
+ str r1, [r0, #+NETARM_GEN_PLL_CONTROL]
+ /*
+ * mask all IRQs by clearing all bits in the INTMRs
+ */
+ mov r1, #0
+ ldr r0, =NETARM_GEN_MODULE_BASE
+ str r1, [r0, #+NETARM_GEN_INTR_ENABLE]
+#endif /* CONFIG_NETARM */
#ifdef CONFIG_ARM7_REVD
/* set clock speed */
@@ -415,6 +466,7 @@ fiq:
.align 5
.globl reset_cpu
reset_cpu:
+#ifndef CONFIG_NETARM
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4)
@@ -423,3 +475,21 @@ reset_cpu:
bic ip, ip, #0x2100 @ ..v....s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
+#else
+ ldr r1, =NETARM_MEM_MODULE_BASE
+ ldr r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR]
+ ldr r1, =0xFFFFF000
+ and r0, r1, r0
+ ldr r1, =(relocate-TEXT_BASE)
+ add r0, r1, r0
+ ldr r4, =NETARM_GEN_MODULE_BASE
+ ldr r1, =NETARM_GEN_SW_SVC_RESETA
+ str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
+ ldr r1, =NETARM_GEN_SW_SVC_RESETB
+ str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
+ ldr r1, =NETARM_GEN_SW_SVC_RESETA
+ str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
+ ldr r1, =NETARM_GEN_SW_SVC_RESETB
+ str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
+ mov pc, r0
+#endif
diff --git a/doc/README.commands.itest b/doc/README.commands.itest
new file mode 100644
index 00000000000..db54160e1fc
--- /dev/null
+++ b/doc/README.commands.itest
@@ -0,0 +1,16 @@
+A slow day today so here is a revised itest command with provisional
+support for comparing strings as well :-))
+
+Now table driven to allow the operators
+-eq, -ne, -lt, -gt, -le, -ge, ==, !=, <>, <, >, <=, >=
+
+Uses the expected command modifier for integer compares of width 1, 2 or
+4 bytes of .b, .w, .l and the new modifer of .s for a string compare.
+String comparison is over the length of the shorter, this hopefully
+avoids missing terminators when using an indirect pointer.
+
+eg.
+if itest.l *40000 == 12345678 then; ....
+if itest.w *40000 != 1234 then; ....
+if itest.b *40000 >= 12 then; ....
+if itest.s *40000 -eq hello then; ....
diff --git a/doc/README.modnet50 b/doc/README.modnet50
new file mode 100644
index 00000000000..de7165c927b
--- /dev/null
+++ b/doc/README.modnet50
@@ -0,0 +1,62 @@
+U-BOOT Port for FSForth ModNET50 Board
+--------------------------------------
+
+author: Thomas Elste <info@elste.org>
+ IMMS gGmbH <www.imms.de>
+
+The port based upon an early (partial complete)
+armboot-port from Stephan Linz for the ModNET50 Board.
+
+
+Overview:
+
+- board with Netsilicon NET+50 ARM7TDMI CPU without MMU
+- 16 MB SDRAM
+- 2 MB Flash (MBL29LV160BE)
+- 10/100 Ethernet PHY (LXT971A)
+
+
+Current Configuration (include/configs/modnet50.h):
+
+Memory Map: 0x00000000 - 0x00FFFFFF 16M SDRAM
+ 0x10000000 - 0x101FFFFF 2M Flash
+
+The Flash uses a BB-Architectur with 35 sectors
+(0:16K; 1,2:8K; 3:32K; 4-34:64K). U-Boot is located in
+the first 5 sectors.
+
+The environment is located at the end of the 4th Flash
+sector (0x1001C000-0x1001FFFF).
+
+Build:
+
+U-boot should be build by using the ELDK Toolchain (arm-linux-*).
+
+ make modnet50_config
+ make
+
+
+Status:
+
+Everything seems to work fine. Booting images was tested by
+booting uCLinux (with and without a separate ramdisk image) from
+flash.
+
+
+Files:
+
+cpu/arm720t/serial_netarm.c .. serial I/O for the cpu
+
+board/modnet50/memsetup.S .. memory setup for ModNET50
+board/modnet50/flash.c .. flash routines
+board/modnet50/modnet50.c .. some board init stuff
+
+drivers/netarm_eth.c .. ethernet driver for the NET+50 CPU
+drivers/netarm_eth.h .. header for ethernet driver
+
+include/configs/modnet50.h .. configuration file for ModNET50
+
+include/netarm_*.h .. register and macro definitions for
+ the NETARM CPU family
+
+doc/README.modnet50 .. this readme
diff --git a/drivers/Makefile b/drivers/Makefile
index 2999eb465a9..b333aed6786 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -32,24 +32,16 @@ OBJS = 3c589.o 5701rls.o ali512x.o \
cs8900.o ct69000.o dataflash.o dc2114x.o \
e1000.o eepro100.o \
i8042.o i82365.o inca-ip_sw.o \
- lan91c96.o natsemi.o \
+ lan91c96.o natsemi.o netarm_eth.o \
ns16550.o ns8382x.o ns87308.o \
pci.o pci_auto.o pci_indirect.o \
pcnet.o plb2800_eth.o \
ps2ser.o ps2mult.o pc_keyb.o keyboard.o \
rtl8019.o rtl8139.o \
- s3c24x0_i2c.o sed13806.o serial.o \
- serial_max3100.o \
- smc91111.o smiLynxEM.o sym53c8xx.o \
- status_led.o \
+ s3c24x0_i2c.o sed13806.o serial.o serial_max3100.o \
+ smc91111.o smiLynxEM.o status_led.o sym53c8xx.o \
ti_pci1410a.o tigon3.o w83c553f.o
-## Disabled for now:
-## cs8900.o ct69000.o dataflash.o dc2114x.o ds1722.o \
-## lan91c96.o mw_eeprom.o natsemi.o \
-## smc91111.o smiLynxEM.o spi_eeprom.o sym53c8xx.o \
-##
-
all: $(LIB)
$(LIB): $(OBJS)
diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c
index c6c2751d643..95179aeb65a 100644
--- a/drivers/cfi_flash.c
+++ b/drivers/cfi_flash.c
@@ -36,13 +36,14 @@
*
* Tested Architectures
* Port Width Chip Width # of banks Flash Chip Board
- * 32 16 1 23F128J3 seranoa/eagle
- * 64 16 1 23F128J3 seranoa/falcon
+ * 32 16 1 28F128J3 seranoa/eagle
+ * 64 16 1 28F128J3 seranoa/falcon
*
*/
/* The DEBUG define must be before common to enable debugging */
-#undef DEBUG
+/* #define DEBUG */
+
#include <common.h>
#include <asm/processor.h>
#ifdef CFG_FLASH_CFI_DRIVER
diff --git a/drivers/netarm_eth.c b/drivers/netarm_eth.c
new file mode 100644
index 00000000000..a15b653e736
--- /dev/null
+++ b/drivers/netarm_eth.c
@@ -0,0 +1,359 @@
+/*
+ * Copyright (C) 2004 IMMS gGmbH <www.imms.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * author(s): Thomas Elste, <info@elste.org>
+ * (some parts derived from uCLinux Netarm Ethernet Driver)
+ */
+
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include "netarm_eth.h"
+#include <asm/arch/netarm_registers.h>
+
+#ifdef CONFIG_DRIVER_NETARMETH
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+
+static int na_mii_poll_busy (void);
+
+static void na_get_mac_addr (void)
+{
+ unsigned short p[3];
+ char *m_addr;
+ char ethaddr[20];
+
+ m_addr = (char *) p;
+
+ p[0] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_1);
+ p[1] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_2);
+ p[2] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_3);
+
+ sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+ m_addr[0], m_addr[1],
+ m_addr[2], m_addr[3], m_addr[4], m_addr[5]);
+
+ printf ("HW-MAC Address: %s\n", ethaddr);
+
+ /* set env, todo: check if already an adress is set */
+ setenv ("ethaddr", ethaddr);
+}
+
+
+static void na_mii_write (int reg, int value)
+{
+ int mii_addr;
+
+ /* Select register */
+ mii_addr = CFG_ETH_PHY_ADDR + reg;
+ SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
+ /* Write value */
+ SET_EADDR (NETARM_ETH_MII_WRITE, value);
+ na_mii_poll_busy ();
+}
+
+static unsigned int na_mii_read (int reg)
+{
+ int mii_addr, val;
+
+ /* Select register */
+ mii_addr = CFG_ETH_PHY_ADDR + reg;
+ SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
+ /* do one management cycle */
+ SET_EADDR (NETARM_ETH_MII_CMD,
+ GET_EADDR (NETARM_ETH_MII_CMD) | NETARM_ETH_MIIC_RSTAT);
+ na_mii_poll_busy ();
+ /* Return read value */
+ val = GET_EADDR (NETARM_ETH_MII_READ);
+ return val;
+}
+
+static int na_mii_poll_busy (void)
+{
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+ while (get_timer_masked () < NA_MII_POLL_BUSY_DELAY) {
+ if (!(GET_EADDR (NETARM_ETH_MII_IND) & NETARM_ETH_MIII_BUSY)) {
+ return 1;
+ }
+ }
+ printf ("na_mii_busy timeout\n");
+ return (0);
+}
+
+static int na_mii_identify_phy (void)
+{
+ int id_reg_a = 0;
+
+ /* get phy id register */
+ id_reg_a = na_mii_read (MII_PHY_ID);
+
+ if (id_reg_a == 0x0043) {
+ /* This must be an Enable or a Lucent LU3X31 PHY chip */
+ return 1;
+ } else if (id_reg_a == 0x0013) {
+ /* it is an Intel LXT971A */
+ return 1;
+ }
+ return (0);
+}
+
+static int na_mii_negotiate (void)
+{
+ int i = 0;
+
+ /* Enable auto-negotiation */
+ na_mii_write (MII_PHY_AUTONEGADV, 0x01e1);
+ /* FIXME: 0x01E1 is 100Mb half and full duplex, 0x0061 is 10Mb only */
+ /* Restart auto-negotiation */
+ na_mii_write (MII_PHY_CONTROL, 0x1200);
+
+ /* status register is 0xffff after setting the autoneg restart bit */
+ while (na_mii_read (MII_PHY_STATUS) == 0xffff) {
+ i++;
+ }
+
+ /* na_mii_read uses the timer already, so we can't use it again for
+ timeout checking.
+ Instead we just try some times.
+ */
+ for (i = 0; i < 40000; i++) {
+ if ((na_mii_read (MII_PHY_STATUS) & 0x0024) == 0x0024) {
+ return 0;
+ }
+ }
+ /*
+ printf("*Warning* autonegotiation timeout, status: 0x%x\n",na_mii_read(MII_PHY_STATUS));
+ */
+ return (1);
+}
+
+static unsigned int na_mii_check_speed (void)
+{
+ unsigned int status;
+
+ /* Read Status register */
+ status = na_mii_read (MII_PHY_STATUS);
+ /* Check link status. If 0, default to 100 Mbps. */
+ if ((status & 0x0004) == 0) {
+ printf ("*Warning* no link detected, set default speed to 100Mbs\n");
+ return 1;
+ } else {
+ if ((na_mii_read (17) & 0x4000) != 0) {
+ printf ("100Mbs link detected\n");
+ return 1;
+ } else {
+ printf ("10Mbs link detected\n");
+ return 0;
+ }
+ }
+ return 0;
+}
+
+static int reset_eth (void)
+{
+ int pt;
+
+ na_get_mac_addr ();
+ pt = na_mii_identify_phy ();
+
+ /* reset the phy */
+ na_mii_write (MII_PHY_CONTROL, 0x8000);
+ reset_timer_masked ();
+ while (get_timer_masked () < NA_MII_NEGOTIATE_DELAY) {
+ if ((na_mii_read (MII_PHY_STATUS) & 0x8000) == 0) {
+ break;
+ }
+ }
+ if (get_timer_masked () >= NA_MII_NEGOTIATE_DELAY)
+ printf ("phy reset timeout\n");
+
+ /* set the PCS reg */
+ SET_EADDR (NETARM_ETH_PCS_CFG, NETARM_ETH_PCSC_CLKS_25M |
+ NETARM_ETH_PCSC_ENJAB | NETARM_ETH_PCSC_NOCFR);
+
+ na_mii_negotiate ();
+ na_mii_check_speed ();
+
+ /* Delay 10 millisecond. (Maybe this should be 1 second.) */
+ udelay (10000);
+
+ /* Turn receive on.
+ Enable statistics register autozero on read.
+ Do not insert MAC address on transmit.
+ Do not enable special test modes. */
+ SET_EADDR (NETARM_ETH_STL_CFG,
+ (NETARM_ETH_STLC_AUTOZ | NETARM_ETH_STLC_RXEN));
+
+ /* Set the inter-packet gap delay to 0.96us for MII.
+ The NET+ARM H/W Reference Guide indicates that the Back-to-back IPG
+ Gap Timer Register should be set to 0x15 and the Non Back-to-back IPG
+ Gap Timer Register should be set to 0x00000C12 for the MII PHY. */
+ SET_EADDR (NETARM_ETH_B2B_IPG_GAP_TMR, 0x15);
+ SET_EADDR (NETARM_ETH_NB2B_IPG_GAP_TMR, 0x00000C12);
+
+ /* Add CRC to end of packets.
+ Pad packets to minimum length of 64 bytes.
+ Allow unlimited length transmit packets.
+ Receive all broadcast packets.
+ NOTE: Multicast addressing is NOT enabled here currently. */
+ SET_EADDR (NETARM_ETH_MAC_CFG,
+ (NETARM_ETH_MACC_CRCEN |
+ NETARM_ETH_MACC_PADEN | NETARM_ETH_MACC_HUGEN));
+ SET_EADDR (NETARM_ETH_SAL_FILTER, NETARM_ETH_SALF_BROAD);
+
+ /* enable fifos */
+ SET_EADDR (NETARM_ETH_GEN_CTRL,
+ (NETARM_ETH_GCR_ERX | NETARM_ETH_GCR_ETX));
+
+ return (0);
+}
+
+
+extern int eth_init (bd_t * bd)
+{
+ reset_eth ();
+ return 0;
+}
+
+extern void eth_halt (void)
+{
+ SET_EADDR (NETARM_ETH_GEN_CTRL, 0);
+}
+
+/* Get a data block via Ethernet */
+extern int eth_rx (void)
+{
+ int i;
+ unsigned short rxlen;
+ unsigned int *addr;
+ unsigned int rxstatus, lastrxlen;
+ char *pa;
+
+ /* RXBR is 1, data block was received */
+ if ((GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXBR) == 0)
+ return 0;
+
+ /* get status register and the length of received block */
+ rxstatus = GET_EADDR (NETARM_ETH_RX_STAT);
+ rxlen = (rxstatus & NETARM_ETH_RXSTAT_SIZE) >> 16;
+
+ if (rxlen == 0)
+ return 0;
+
+ /* clear RXBR to make fifo available */
+ SET_EADDR (NETARM_ETH_GEN_STAT,
+ GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_RXBR);
+
+ /* clear TXBC to make fifo available */
+ /* According to NETARM50 data manual you just have to clear
+ RXBR but that has no effect. Only after clearing TXBC the
+ Fifo becomes readable. */
+ SET_EADDR (NETARM_ETH_GEN_STAT,
+ GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_TXBC);
+
+ addr = (unsigned int *) NetRxPackets[0];
+ pa = (char *) NetRxPackets[0];
+
+ /* read the fifo */
+ for (i = 0; i < rxlen / 4; i++) {
+ *addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
+ addr++;
+ }
+
+ if (GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXREGR) {
+ /* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */
+ lastrxlen =
+ (GET_EADDR (NETARM_ETH_GEN_STAT) &
+ NETARM_ETH_GST_RXFDB) >> 28;
+ *addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
+ switch (lastrxlen) {
+ case 1:
+ *addr &= 0xff000000;
+ break;
+ case 2:
+ *addr &= 0xffff0000;
+ break;
+ case 3:
+ *addr &= 0xffffff00;
+ break;
+ }
+ }
+
+ /* Pass the packet up to the protocol layers. */
+ NetReceive (NetRxPackets[0], rxlen);
+
+ return rxlen;
+}
+
+/* Send a data block via Ethernet. */
+extern int eth_send (volatile void *packet, int length)
+{
+ int i, length32;
+ char *pa;
+ unsigned int *pa32, lastp = 0, rest;
+
+ pa = (char *) packet;
+ pa32 = (unsigned int *) packet;
+ length32 = length / 4;
+ rest = length % 4;
+
+ /* make sure there's no garbage in the last word */
+ switch (rest) {
+ case 0:
+ lastp = pa32[length32];
+ length32--;
+ break;
+ case 1:
+ lastp = pa32[length32] & 0x000000ff;
+ break;
+ case 2:
+ lastp = pa32[length32] & 0x0000ffff;
+ break;
+ case 3:
+ lastp = pa32[length32] & 0x00ffffff;
+ break;
+ }
+
+ /* write to the fifo */
+ for (i = 0; i < length32; i++)
+ SET_EADDR (NETARM_ETH_FIFO_DAT1, pa32[i]);
+
+ /* the last word is written to an extra register, this
+ starts the transmission */
+ SET_EADDR (NETARM_ETH_FIFO_DAT2, lastp);
+
+ /* NETARM_ETH_TXSTAT_TXOK should be checked, to know if the transmission
+ went fine. But we can't use the timer for a timeout loop because
+ of it is used already in upper layers. So we just try some times. */
+ i = 0;
+ while (i < 50000) {
+ if ((GET_EADDR (NETARM_ETH_TX_STAT) & NETARM_ETH_TXSTAT_TXOK)
+ == NETARM_ETH_TXSTAT_TXOK)
+ return 0;
+ i++;
+ }
+
+ printf ("eth_send timeout\n");
+ return 1;
+}
+
+#endif /* COMMANDS & CFG_NET */
+
+#endif /* CONFIG_DRIVER_NETARMETH */
diff --git a/drivers/netarm_eth.h b/drivers/netarm_eth.h
new file mode 100644
index 00000000000..8edab82da3e
--- /dev/null
+++ b/drivers/netarm_eth.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2003 IMMS gGmbH <www.imms.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * author(s): Thomas Elste, <info@elste.org>
+ */
+
+#include <asm/types.h>
+#include <config.h>
+
+#ifdef CONFIG_DRIVER_NETARMETH
+
+#define SET_EADDR(ad,val) *(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE) = val
+#define GET_EADDR(ad) (*(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE))
+
+#define NA_MII_POLL_BUSY_DELAY 900
+
+/* MII negotiation timeout value
+ 500 jiffies = 5 seconds */
+#define NA_MII_NEGOTIATE_DELAY 30
+
+/* Registers in the physical layer chip */
+#define MII_PHY_CONTROL 0
+#define MII_PHY_STATUS 1
+#define MII_PHY_ID 2
+#define MII_PHY_AUTONEGADV 4
+
+#endif /* CONFIG_DRIVER_NETARMETH */
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index f02c404a8bd..daa70349d27 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -432,12 +432,13 @@ get_vfatname(fsdata *mydata, int curclust, __u8 *cluster,
dir_entry *realdent;
dir_slot *slotptr = (dir_slot*) retdent;
__u8 *nextclust = cluster + mydata->clust_size * SECTOR_SIZE;
- __u8 counter = slotptr->id & 0xf;
+ __u8 counter = (slotptr->id & ~LAST_LONG_ENTRY_MASK) & 0xff;
int idx = 0;
while ((__u8*)slotptr < nextclust) {
if (counter == 0) break;
- if ((slotptr->id & 0x0f) != counter) return -1;
+ if (((slotptr->id & ~LAST_LONG_ENTRY_MASK) & 0xff) != counter)
+ return -1;
slotptr++;
counter--;
}
@@ -475,7 +476,7 @@ get_vfatname(fsdata *mydata, int curclust, __u8 *cluster,
do {
slotptr--;
if (slot2str(slotptr, l_name, &idx)) break;
- } while (!(slotptr->id & 0x40));
+ } while (!(slotptr->id & LAST_LONG_ENTRY_MASK));
l_name[idx] = '\0';
if (*l_name == DELETED_FLAG) *l_name = '\0';
@@ -536,7 +537,7 @@ static dir_entry *get_dentfromdir (fsdata * mydata, int startsect,
if ((dentptr->attr & ATTR_VOLUME)) {
#ifdef CONFIG_SUPPORT_VFAT
if ((dentptr->attr & ATTR_VFAT) &&
- (dentptr->name[0] & 0x40)) {
+ (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) {
prevcksum = ((dir_slot *) dentptr)
->alias_checksum;
get_vfatname (mydata, curclust, get_dentfromdir_block,
@@ -799,7 +800,7 @@ do_fat_read (const char *filename, void *buffer, unsigned long maxsize,
if ((dentptr->attr & ATTR_VOLUME)) {
#ifdef CONFIG_SUPPORT_VFAT
if ((dentptr->attr & ATTR_VFAT) &&
- (dentptr->name[0] & 0x40)) {
+ (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) {
prevcksum = ((dir_slot *) dentptr)->alias_checksum;
get_vfatname (mydata, 0, do_fat_read_block, dentptr, l_name);
if (dols == LS_ROOT) {
diff --git a/include/asm-arm/arch-arm720t/netarm_dma_module.h b/include/asm-arm/arch-arm720t/netarm_dma_module.h
new file mode 100644
index 00000000000..c5170359a25
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_dma_module.h
@@ -0,0 +1,184 @@
+/*
+ * include/asm-armnommu/arch-netarm/netarm_dma_module.h
+ *
+ * Copyright (C) 2000 NETsilicon, Inc.
+ * Copyright (C) 2000 WireSpeed Communications Corporation
+ *
+ * This software is copyrighted by WireSpeed. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall WireSpeed
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Joe deBlaquiere
+ * David Smith
+ */
+
+#ifndef __NETARM_DMA_MODULE_REGISTERS_H
+#define __NETARM_DMA_MODULE_REGISTERS_H
+
+/* GEN unit register offsets */
+
+#define NETARM_DMA_MODULE_BASE (0xFF900000)
+
+#define get_dma_reg_addr(c) ((volatile unsigned int *)(NETARM_DMA_MODULE_BASE + (c)))
+
+#define NETARM_DMA1A_BFR_DESCRPTOR_PTR (0x00)
+#define NETARM_DMA1A_CONTROL (0x10)
+#define NETARM_DMA1A_STATUS (0x14)
+#define NETARM_DMA1B_BFR_DESCRPTOR_PTR (0x20)
+#define NETARM_DMA1B_CONTROL (0x30)
+#define NETARM_DMA1B_STATUS (0x34)
+#define NETARM_DMA1C_BFR_DESCRPTOR_PTR (0x40)
+#define NETARM_DMA1C_CONTROL (0x50)
+#define NETARM_DMA1C_STATUS (0x54)
+#define NETARM_DMA1D_BFR_DESCRPTOR_PTR (0x60)
+#define NETARM_DMA1D_CONTROL (0x70)
+#define NETARM_DMA1D_STATUS (0x74)
+
+#define NETARM_DMA2_BFR_DESCRPTOR_PTR (0x80)
+#define NETARM_DMA2_CONTROL (0x90)
+#define NETARM_DMA2_STATUS (0x94)
+
+#define NETARM_DMA3_BFR_DESCRPTOR_PTR (0xA0)
+#define NETARM_DMA3_CONTROL (0xB0)
+#define NETARM_DMA3_STATUS (0xB4)
+
+#define NETARM_DMA4_BFR_DESCRPTOR_PTR (0xC0)
+#define NETARM_DMA4_CONTROL (0xD0)
+#define NETARM_DMA4_STATUS (0xD4)
+
+#define NETARM_DMA5_BFR_DESCRPTOR_PTR (0xE0)
+#define NETARM_DMA5_CONTROL (0xF0)
+#define NETARM_DMA5_STATUS (0xF4)
+
+#define NETARM_DMA6_BFR_DESCRPTOR_PTR (0x100)
+#define NETARM_DMA6_CONTROL (0x110)
+#define NETARM_DMA6_STATUS (0x114)
+
+#define NETARM_DMA7_BFR_DESCRPTOR_PTR (0x120)
+#define NETARM_DMA7_CONTROL (0x130)
+#define NETARM_DMA7_STATUS (0x134)
+
+#define NETARM_DMA8_BFR_DESCRPTOR_PTR (0x140)
+#define NETARM_DMA8_CONTROL (0x150)
+#define NETARM_DMA8_STATUS (0x154)
+
+#define NETARM_DMA9_BFR_DESCRPTOR_PTR (0x160)
+#define NETARM_DMA9_CONTROL (0x170)
+#define NETARM_DMA9_STATUS (0x174)
+
+#define NETARM_DMA10_BFR_DESCRPTOR_PTR (0x180)
+#define NETARM_DMA10_CONTROL (0x190)
+#define NETARM_DMA10_STATUS (0x194)
+
+/* select bitfield defintions */
+
+/* DMA Control Register ( 0xFF90_0XX0 ) */
+
+#define NETARM_DMA_CTL_ENABLE (0x80000000)
+
+#define NETARM_DMA_CTL_ABORT (0x40000000)
+
+#define NETARM_DMA_CTL_BUS_100_PERCENT (0x00000000)
+#define NETARM_DMA_CTL_BUS_75_PERCENT (0x10000000)
+#define NETARM_DMA_CTL_BUS_50_PERCENT (0x20000000)
+#define NETARM_DMA_CTL_BUS_25_PERCENT (0x30000000)
+
+#define NETARM_DMA_CTL_BUS_MASK (0x30000000)
+
+#define NETARM_DMA_CTL_MODE_FB_TO_MEM (0x00000000)
+#define NETARM_DMA_CTL_MODE_FB_FROM_MEM (0x04000000)
+#define NETARM_DMA_CTL_MODE_MEM_TO_MEM (0x08000000)
+
+#define NETARM_DMA_CTL_BURST_NONE (0x00000000)
+#define NETARM_DMA_CTL_BURST_8_BYTE (0x01000000)
+#define NETARM_DMA_CTL_BURST_16_BYTE (0x02000000)
+
+#define NETARM_DMA_CTL_BURST_MASK (0x03000000)
+
+#define NETARM_DMA_CTL_SRC_INCREMENT (0x00200000)
+
+#define NETARM_DMA_CTL_DST_INCREMENT (0x00100000)
+
+/* these apply only to ext xfers on DMA 3 or 4 */
+
+#define NETARM_DMA_CTL_CH_3_4_REQ_EXT (0x00800000)
+
+#define NETARM_DMA_CTL_CH_3_4_DATA_32 (0x00000000)
+#define NETARM_DMA_CTL_CH_3_4_DATA_16 (0x00010000)
+#define NETARM_DMA_CTL_CH_3_4_DATA_8 (0x00020000)
+
+#define NETARM_DMA_CTL_STATE(X) ((X) & 0xFC00)
+#define NETARM_DMA_CTL_INDEX(X) ((X) & 0x03FF)
+
+/* DMA Status Register ( 0xFF90_0XX4 ) */
+
+#define NETARM_DMA_STAT_NC_INTPEN (0x80000000)
+#define NETARM_DMA_STAT_EC_INTPEN (0x40000000)
+#define NETARM_DMA_STAT_NR_INTPEN (0x20000000)
+#define NETARM_DMA_STAT_CA_INTPEN (0x10000000)
+#define NETARM_DMA_STAT_INTPEN_MASK (0xF0000000)
+
+#define NETARM_DMA_STAT_NC_INT_EN (0x00800000)
+#define NETARM_DMA_STAT_EC_INT_EN (0x00400000)
+#define NETARM_DMA_STAT_NR_INT_EN (0x00200000)
+#define NETARM_DMA_STAT_CA_INT_EN (0x00100000)
+#define NETARM_DMA_STAT_INT_EN_MASK (0x00F00000)
+
+#define NETARM_DMA_STAT_WRAP (0x00080000)
+#define NETARM_DMA_STAT_IDONE (0x00040000)
+#define NETARM_DMA_STAT_LAST (0x00020000)
+#define NETARM_DMA_STAT_FULL (0x00010000)
+
+#define NETARM_DMA_STAT_BUFLEN(X) ((X) & 0x7FFF)
+
+/* DMA Buffer Descriptor Word 0 bitfields. */
+
+#define NETARM_DMA_BD0_WRAP (0x80000000)
+#define NETARM_DMA_BD0_IDONE (0x40000000)
+#define NETARM_DMA_BD0_LAST (0x20000000)
+#define NETARM_DMA_BD0_BUFPTR_MASK (0x1FFFFFFF)
+
+/* DMA Buffer Descriptor Word 1 bitfields. */
+
+#define NETARM_DMA_BD1_STATUS_MASK (0xFFFF0000)
+#define NETARM_DMA_BD1_FULL (0x00008000)
+#define NETARM_DMA_BD1_BUFLEN_MASK (0x00007FFF)
+
+#ifndef __ASSEMBLER__
+
+typedef struct __NETARM_DMA_Buff_Desc_FlyBy
+{
+ unsigned int word0;
+ unsigned int word1;
+} NETARM_DMA_Buff_Desc_FlyBy, *pNETARM_DMA_Buff_Desc_FlyBy ;
+
+typedef struct __NETARM_DMA_Buff_Desc_M_to_M
+{
+ unsigned int word0;
+ unsigned int word1;
+ unsigned int word2;
+ unsigned int word3;
+} NETARM_DMA_Buff_Desc_M_to_M, *pNETARM_DMA_Buff_Desc_M_to_M ;
+
+#endif
+
+#endif
+
diff --git a/include/asm-arm/arch-arm720t/netarm_eni_module.h b/include/asm-arm/arch-arm720t/netarm_eni_module.h
new file mode 100644
index 00000000000..317b354513e
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_eni_module.h
@@ -0,0 +1,121 @@
+/*
+ * include/asm-armnommu/arch-netarm/netarm_eni_module.h
+ *
+ * Copyright (C) 2000 NETsilicon, Inc.
+ * Copyright (C) 2000 WireSpeed Communications Corporation
+ *
+ * This software is copyrighted by WireSpeed. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall WireSpeed
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : David Smith
+ */
+
+#ifndef __NETARM_ENI_MODULE_REGISTERS_H
+#define __NETARM_ENI_MODULE_REGISTERS_H
+
+/* ENI unit register offsets */
+
+/* #ifdef CONFIG_ARCH_NETARM */
+#define NETARM_ENI_MODULE_BASE (0xFFA00000)
+/* #endif / * CONFIG_ARCH_NETARM */
+
+#define get_eni_reg_addr(c) ((volatile unsigned int *)(NETARM_ENI_MODULE_BASE + (c)))
+#define get_eni_ctl_reg_addr(minor) \
+ (get_eni_reg_addr(NETARM_ENI_1284_PORT1_CONTROL) + (minor))
+
+#define NETARM_ENI_GENERAL_CONTROL (0x00)
+#define NETARM_ENI_STATUS_CONTROL (0x04)
+#define NETARM_ENI_FIFO_MODE_DATA (0x08)
+
+#define NETARM_ENI_1284_PORT1_CONTROL (0x10)
+#define NETARM_ENI_1284_PORT2_CONTROL (0x14)
+#define NETARM_ENI_1284_PORT3_CONTROL (0x18)
+#define NETARM_ENI_1284_PORT4_CONTROL (0x1c)
+
+#define NETARM_ENI_1284_CHANNEL1_DATA (0x20)
+#define NETARM_ENI_1284_CHANNEL2_DATA (0x24)
+#define NETARM_ENI_1284_CHANNEL3_DATA (0x28)
+#define NETARM_ENI_1284_CHANNEL4_DATA (0x2c)
+
+#define NETARM_ENI_ENI_CONTROL (0x30)
+#define NETARM_ENI_ENI_PULSED_INTR (0x34)
+#define NETARM_ENI_ENI_SHARED_RAM_ADDR (0x38)
+#define NETARM_ENI_ENI_SHARED (0x3c)
+
+/* select bitfield defintions */
+
+/* General Control Register (0xFFA0_0000) */
+
+#define NETARM_ENI_GCR_ENIMODE_IEEE1284 (0x00000001)
+#define NETARM_ENI_GCR_ENIMODE_SHRAM16 (0x00000004)
+#define NETARM_ENI_GCR_ENIMODE_SHRAM8 (0x00000005)
+#define NETARM_ENI_GCR_ENIMODE_FIFO16 (0x00000006)
+#define NETARM_ENI_GCR_ENIMODE_FIFO8 (0x00000007)
+
+#define NETARM_ENI_GCR_ENIMODE_MASK (0x00000007)
+
+/* IEEE 1284 Port Control Registers 1-4 (0xFFA0_0010, 0xFFA0_0014,
+ 0xFFA0_0018, 0xFFA0_001c) */
+
+#define NETARM_ENI_1284PC_PORT_ENABLE (0x80000000)
+#define NETARM_ENI_1284PC_DMA_ENABLE (0x40000000)
+#define NETARM_ENI_1284PC_OBE_INT_EN (0x20000000)
+#define NETARM_ENI_1284PC_ACK_INT_EN (0x10000000)
+#define NETARM_ENI_1284PC_ECP_MODE (0x08000000)
+#define NETARM_ENI_1284PC_LOOPBACK_MODE (0x04000000)
+
+#define NETARM_ENI_1284PC_STROBE_TIME0 (0x00000000) /* 0.5 uS */
+#define NETARM_ENI_1284PC_STROBE_TIME1 (0x01000000) /* 1.0 uS */
+#define NETARM_ENI_1284PC_STROBE_TIME2 (0x02000000) /* 5.0 uS */
+#define NETARM_ENI_1284PC_STROBE_TIME3 (0x03000000) /* 10.0 uS */
+#define NETARM_ENI_1284PC_STROBE_MASK (0x03000000)
+
+#define NETARM_ENI_1284PC_MAN_STROBE_EN (0x00800000)
+#define NETARM_ENI_1284PC_FAST_MODE (0x00400000)
+#define NETARM_ENI_1284PC_BIDIR_MODE (0x00200000)
+
+#define NETARM_ENI_1284PC_MAN_STROBE (0x00080000)
+#define NETARM_ENI_1284PC_AUTO_FEED (0x00040000)
+#define NETARM_ENI_1284PC_INIT (0x00020000)
+#define NETARM_ENI_1284PC_HSELECT (0x00010000)
+#define NETARM_ENI_1284PC_FE_INT_EN (0x00008000)
+#define NETARM_ENI_1284PC_EPP_MODE (0x00004000)
+#define NETARM_ENI_1284PC_IBR_INT_EN (0x00002000)
+#define NETARM_ENI_1284PC_IBR (0x00001000)
+
+#define NETARM_ENI_1284PC_RXFDB_1BYTE (0x00000400)
+#define NETARM_ENI_1284PC_RXFDB_2BYTE (0x00000800)
+#define NETARM_ENI_1284PC_RXFDB_3BYTE (0x00000c00)
+#define NETARM_ENI_1284PC_RXFDB_4BYTE (0x00000000)
+
+#define NETARM_ENI_1284PC_RBCC (0x00000200)
+#define NETARM_ENI_1284PC_RBCT (0x00000100)
+#define NETARM_ENI_1284PC_ACK (0x00000080)
+#define NETARM_ENI_1284PC_FIFO_E (0x00000040)
+#define NETARM_ENI_1284PC_OBE (0x00000020)
+#define NETARM_ENI_1284PC_ACK_INT (0x00000010)
+#define NETARM_ENI_1284PC_BUSY (0x00000008)
+#define NETARM_ENI_1284PC_PE (0x00000004)
+#define NETARM_ENI_1284PC_PSELECT (0x00000002)
+#define NETARM_ENI_1284PC_FAULT (0x00000001)
+
+#endif /* __NETARM_ENI_MODULE_REGISTERS_H */
diff --git a/include/asm-arm/arch-arm720t/netarm_eth_module.h b/include/asm-arm/arch-arm720t/netarm_eth_module.h
new file mode 100644
index 00000000000..8f2f36981a3
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_eth_module.h
@@ -0,0 +1,160 @@
+/*
+ * include/asm-armnommu/arch-netarm/netarm_eth_module.h
+ *
+ * Copyright (C) 2000 NETsilicon, Inc.
+ * Copyright (C) 2000 WireSpeed Communications Corporation
+ *
+ * This software is copyrighted by WireSpeed. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall WireSpeed
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Jackie Smith Cashion
+ * David Smith
+ */
+
+#ifndef __NETARM_ETH_MODULE_REGISTERS_H
+#define __NETARM_ETH_MODULE_REGISTERS_H
+
+/* ETH unit register offsets */
+
+#define NETARM_ETH_MODULE_BASE (0xFF800000)
+
+#define get_eth_reg_addr(c) ((volatile unsigned int *)(NETARM_ETH_MODULE_BASE + (c)))
+
+#define NETARM_ETH_GEN_CTRL (0x000) /* Ethernet Gen Control Reg */
+#define NETARM_ETH_GEN_STAT (0x004) /* Ethernet Gen Status Reg */
+#define NETARM_ETH_FIFO_DAT1 (0x008) /* Fifo Data Reg 1 */
+#define NETARM_ETH_FIFO_DAT2 (0x00C) /* Fifo Data Reg 2 */
+#define NETARM_ETH_TX_STAT (0x010) /* Transmit Status Reg */
+#define NETARM_ETH_RX_STAT (0x014) /* Receive Status Reg */
+
+#define NETARM_ETH_MAC_CFG (0x400) /* MAC Configuration Reg */
+#define NETARM_ETH_PCS_CFG (0x408) /* PCS Configuration Reg */
+#define NETARM_ETH_STL_CFG (0x410) /* STL Configuration Reg */
+#define NETARM_ETH_B2B_IPG_GAP_TMR (0x440) /* Back-to-back IPG
+ Gap Timer Reg */
+#define NETARM_ETH_NB2B_IPG_GAP_TMR (0x444) /* Non Back-to-back
+ IPG Gap Timer Reg */
+#define NETARM_ETH_MII_CMD (0x540) /* MII (PHY) Command Reg */
+#define NETARM_ETH_MII_ADDR (0x544) /* MII Address Reg */
+#define NETARM_ETH_MII_WRITE (0x548) /* MII Write Data Reg */
+#define NETARM_ETH_MII_READ (0x54C) /* MII Read Data Reg */
+#define NETARM_ETH_MII_IND (0x550) /* MII Indicators Reg */
+#define NETARM_ETH_MIB_CRCEC (0x580) /* (MIB) CRC Error Counter */
+#define NETARM_ETH_MIB_AEC (0x584) /* Alignment Error Counter */
+#define NETARM_ETH_MIB_CEC (0x588) /* Code Error Counter */
+#define NETARM_ETH_MIB_LFC (0x58C) /* Long Frame Counter */
+#define NETARM_ETH_MIB_SFC (0x590) /* Short Frame Counter */
+#define NETARM_ETH_MIB_LCC (0x594) /* Late Collision Counter */
+#define NETARM_ETH_MIB_EDC (0x598) /* Excessive Deferral
+ Counter */
+#define NETARM_ETH_MIB_MCC (0x59C) /* Maximum Collision Counter */
+#define NETARM_ETH_SAL_FILTER (0x5C0) /* SAL Station Address
+ Filter Reg */
+#define NETARM_ETH_SAL_STATION_ADDR_1 (0x5C4) /* SAL Station Address
+ Reg */
+#define NETARM_ETH_SAL_STATION_ADDR_2 (0x5C8)
+#define NETARM_ETH_SAL_STATION_ADDR_3 (0x5CC)
+#define NETARM_ETH_SAL_HASH_TBL_1 (0x5D0) /* SAL Multicast Hash Table*/
+#define NETARM_ETH_SAL_HASH_TBL_2 (0x5D4)
+#define NETARM_ETH_SAL_HASH_TBL_3 (0x5D8)
+#define NETARM_ETH_SAL_HASH_TBL_4 (0x5DC)
+
+/* select bitfield defintions */
+
+/* Ethernet General Control Register (0xFF80_0000) */
+
+#define NETARM_ETH_GCR_ERX (0x80000000) /* Enable Receive FIFO */
+#define NETARM_ETH_GCR_ERXDMA (0x40000000) /* Enable Receive DMA */
+#define NETARM_ETH_GCR_ETX (0x00800000) /* Enable Transmit FIFO */
+#define NETARM_ETH_GCR_ETXDMA (0x00400000) /* Enable Transmit DMA */
+#define NETARM_ETH_GCR_ETXWM_50 (0x00100000) /* Transmit FIFO Water
+ Mark. Start transmit
+ when FIFO is 50%
+ full. */
+#define NETARM_ETH_GCR_PNA (0x00000400) /* pSOS pNA Buffer
+ Descriptor Format */
+
+/* Ethernet General Status Register (0xFF80_0004) */
+
+#define NETARM_ETH_GST_RXFDB (0x30000000)
+#define NETARM_ETH_GST_RXREGR (0x08000000) /* Receive Register
+ Ready */
+#define NETARM_ETH_GST_RXFIFOH (0x04000000)
+#define NETARM_ETH_GST_RXBR (0x02000000)
+#define NETARM_ETH_GST_RXSKIP (0x01000000)
+
+#define NETARM_ETH_GST_TXBC (0x00020000)
+
+
+/* Ethernet Transmit Status Register (0xFF80_0010) */
+
+#define NETARM_ETH_TXSTAT_TXOK (0x00008000)
+
+
+/* Ethernet Receive Status Register (0xFF80_0014) */
+
+#define NETARM_ETH_RXSTAT_SIZE (0xFFFF0000)
+#define NETARM_ETH_RXSTAT_RXOK (0x00002000)
+
+
+/* PCS Configuration Register (0xFF80_0408) */
+
+#define NETARM_ETH_PCSC_NOCFR (0x1) /* Disable Ciphering */
+#define NETARM_ETH_PCSC_ENJAB (0x2) /* Enable Jabber Protection */
+#define NETARM_ETH_PCSC_CLKS_25M (0x0) /* 25 MHz Clock Speed Select */
+#define NETARM_ETH_PCSC_CLKS_33M (0x4) /* 33 MHz Clock Speed Select */
+
+/* STL Configuration Register (0xFF80_0410) */
+
+#define NETARM_ETH_STLC_RXEN (0x2) /* Enable Packet Receiver */
+#define NETARM_ETH_STLC_AUTOZ (0x4) /* Auto Zero Statistics */
+
+/* MAC Configuration Register (0xFF80_0400) */
+
+#define NETARM_ETH_MACC_HUGEN (0x1) /* Enable Unlimited Transmit
+ Frame Sizes */
+#define NETARM_ETH_MACC_PADEN (0x4) /* Automatic Pad Fill Frames
+ to 64 Bytes */
+#define NETARM_ETH_MACC_CRCEN (0x8) /* Append CRC to Transmit
+ Frames */
+
+/* MII (PHY) Command Register (0xFF80_0540) */
+
+#define NETARM_ETH_MIIC_RSTAT (0x1) /* Single Scan for Read Data */
+
+/* MII Indicators Register (0xFF80_0550) */
+
+#define NETARM_ETH_MIII_BUSY (0x1) /* MII I/F Busy with
+ Read/Write */
+
+/* SAL Station Address Filter Register (0xFF80_05C0) */
+
+#define NETARM_ETH_SALF_PRO (0x8) /* Enable Promiscuous Mode */
+#define NETARM_ETH_SALF_PRM (0x4) /* Accept All Multicast
+ Packets */
+#define NETARM_ETH_SALF_PRA (0x2) /* Accept Mulitcast Packets
+ using Hash Table */
+#define NETARM_ETH_SALF_BROAD (0x1) /* Accept All Broadcast
+ Packets */
+
+
+#endif /* __NETARM_GEN_MODULE_REGISTERS_H */
diff --git a/include/asm-arm/arch-arm720t/netarm_gen_module.h b/include/asm-arm/arch-arm720t/netarm_gen_module.h
new file mode 100644
index 00000000000..6ab5cc10faf
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_gen_module.h
@@ -0,0 +1,170 @@
+/*
+ * include/asm-armnommu/arch-netarm/netarm_gen_module.h
+ *
+ * Copyright (C) 2000, 2001 NETsilicon, Inc.
+ * Copyright (C) 2000, 2001 Red Hat, Inc.
+ *
+ * This software is copyrighted by Red Hat. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall Red Hat
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Joe deBlaquiere
+ */
+
+#ifndef __NETARM_GEN_MODULE_REGISTERS_H
+#define __NETARM_GEN_MODULE_REGISTERS_H
+
+/* GEN unit register offsets */
+
+#define NETARM_GEN_MODULE_BASE (0xFFB00000)
+
+#define get_gen_reg_addr(c) ((volatile unsigned int *)(NETARM_GEN_MODULE_BASE + (c)))
+
+#define NETARM_GEN_SYSTEM_CONTROL (0x00)
+#define NETARM_GEN_STATUS_CONTROL (0x04)
+#define NETARM_GEN_PLL_CONTROL (0x08)
+#define NETARM_GEN_SOFTWARE_SERVICE (0x0c)
+
+#define NETARM_GEN_TIMER1_CONTROL (0x10)
+#define NETARM_GEN_TIMER1_STATUS (0x14)
+#define NETARM_GEN_TIMER2_CONTROL (0x18)
+#define NETARM_GEN_TIMER2_STATUS (0x1c)
+
+#define NETARM_GEN_PORTA (0x20)
+#define NETARM_GEN_PORTB (0x24)
+#define NETARM_GEN_PORTC (0x28)
+
+#define NETARM_GEN_INTR_ENABLE (0x30)
+#define NETARM_GEN_INTR_ENABLE_SET (0x34)
+#define NETARM_GEN_INTR_ENABLE_CLR (0x38)
+#define NETARM_GEN_INTR_STATUS_EN (0x34)
+#define NETARM_GEN_INTR_STATUS_RAW (0x38)
+
+#define NETARM_GEN_CACHE_CONTROL1 (0x40)
+#define NETARM_GEN_CACHE_CONTROL2 (0x44)
+
+/* select bitfield definitions */
+
+/* System Control Register ( 0xFFB0_0000 ) */
+
+#define NETARM_GEN_SYS_CFG_LENDIAN (0x80000000)
+#define NETARM_GEN_SYS_CFG_BENDIAN (0x00000000)
+
+#define NETARM_GEN_SYS_CFG_BUSQRTR (0x00000000)
+#define NETARM_GEN_SYS_CFG_BUSHALF (0x20000000)
+#define NETARM_GEN_SYS_CFG_BUSFULL (0x40000000)
+
+#define NETARM_GEN_SYS_CFG_BCLK_DISABLE (0x10000000)
+
+#define NETARM_GEN_SYS_CFG_WDOG_EN (0x01000000)
+#define NETARM_GEN_SYS_CFG_WDOG_IRQ (0x00000000)
+#define NETARM_GEN_SYS_CFG_WDOG_FIQ (0x00400000)
+#define NETARM_GEN_SYS_CFG_WDOG_RST (0x00800000)
+#define NETARM_GEN_SYS_CFG_WDOG_24 (0x00000000)
+#define NETARM_GEN_SYS_CFG_WDOG_26 (0x00100000)
+#define NETARM_GEN_SYS_CFG_WDOG_28 (0x00200000)
+#define NETARM_GEN_SYS_CFG_WDOG_29 (0x00300000)
+
+#define NETARM_GEN_SYS_CFG_BUSMON_EN (0x00040000)
+#define NETARM_GEN_SYS_CFG_BUSMON_128 (0x00000000)
+#define NETARM_GEN_SYS_CFG_BUSMON_64 (0x00010000)
+#define NETARM_GEN_SYS_CFG_BUSMON_32 (0x00020000)
+#define NETARM_GEN_SYS_CFG_BUSMON_16 (0x00030000)
+
+#define NETARM_GEN_SYS_CFG_USER_EN (0x00008000)
+#define NETARM_GEN_SYS_CFG_BUSER_EN (0x00004000)
+
+#define NETARM_GEN_SYS_CFG_BUSARB_INT (0x00002000)
+#define NETARM_GEN_SYS_CFG_BUSARB_EXT (0x00000000)
+
+#define NETARM_GEN_SYS_CFG_DMATST (0x00001000)
+
+#define NETARM_GEN_SYS_CFG_TEALAST (0x00000800)
+
+#define NETARM_GEN_SYS_CFG_ALIGN_ABORT (0x00000400)
+
+#define NETARM_GEN_SYS_CFG_CACHE_EN (0x00000200)
+
+#define NETARM_GEN_SYS_CFG_WRI_BUF_EN (0x00000100)
+
+#define NETARM_GEN_SYS_CFG_CACHE_INIT (0x00000080)
+
+/* PLL Control Register ( 0xFFB0_0008 ) */
+
+#define NETARM_GEN_PLL_CTL_PLLCNT_MASK (0x0F000000)
+
+#define NETARM_GEN_PLL_CTL_PLLCNT(x) (((x)<<24) & \
+ NETARM_GEN_PLL_CTL_PLLCNT_MASK)
+
+/* Defaults for POLTST and ICP Fields in PLL CTL */
+#define NETARM_GEN_PLL_CTL_OUTDIV(x) (x)
+#define NETARM_GEN_PLL_CTL_INDIV(x) ((x)<<6)
+#define NETARM_GEN_PLL_CTL_POLTST_DEF (0x00000E00)
+#define NETARM_GEN_PLL_CTL_ICP_DEF (0x0000003C)
+
+
+/* Software Service Register ( 0xFFB0_000C ) */
+
+#define NETARM_GEN_SW_SVC_RESETA (0x123)
+#define NETARM_GEN_SW_SVC_RESETB (0x321)
+
+/* PORT C Register ( 0xFFB0_0028 ) */
+
+#define NETARM_GEN_PORT_MODE(x) (((x)<<24) + (0xFF00))
+#define NETARM_GEN_PORT_DIR(x) (((x)<<16) + (0xFF00))
+
+/* Timer Registers ( 0xFFB0_0010 0xFFB0_0018 ) */
+
+#define NETARM_GEN_TCTL_ENABLE (0x80000000)
+#define NETARM_GEN_TCTL_INT_ENABLE (0x40000000)
+
+#define NETARM_GEN_TCTL_USE_IRQ (0x00000000)
+#define NETARM_GEN_TCTL_USE_FIQ (0x20000000)
+
+#define NETARM_GEN_TCTL_USE_PRESCALE (0x10000000)
+#define NETARM_GEN_TCTL_INIT_COUNT(x) ((x) & 0x1FF)
+
+#define NETARM_GEN_TSTAT_INTPEN (0x40000000)
+#define NETARM_GEN_TSTAT_CTC_MASK (0x000001FF)
+
+/* prescale to msecs conversion */
+
+#define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 20480 ) * ( 0x1FF - ( (x) & \
+ NETARM_GEN_TSTAT_CTC_MASK ) + \
+ 1 ) ) / (NETARM_XTAL_FREQ/1000) )
+
+#define NETARM_GEN_TIMER_SET_HZ(x) ( ( ((NETARM_XTAL_FREQ/(20480*(x)))-1) & \
+ NETARM_GEN_TSTAT_CTC_MASK ) | \
+ NETARM_GEN_TCTL_USE_PRESCALE )
+
+#if 0
+/* ifdef CONFIG_NETARM_PLL_BYPASS else */
+#error test
+#define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 4096 ) * ( 0x1FF - ( (x) & \
+ NETARM_GEN_TSTAT_CTC_MASK ) + \
+ 1 ) ) / (NETARM_XTAL_FREQ/1000) )
+
+#define NETARM_GEN_TIMER_SET_HZ(x) ( ( ((NETARM_XTAL_FREQ/(4096*(x)))-1) & \
+ NETARM_GEN_TSTAT_CTC_MASK ) | \
+ NETARM_GEN_TCTL_USE_PRESCALE )
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-arm720t/netarm_mem_module.h b/include/asm-arm/arch-arm720t/netarm_mem_module.h
new file mode 100644
index 00000000000..02ca9fb5714
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_mem_module.h
@@ -0,0 +1,158 @@
+/*
+ * include/asm-armnommu/arch-netarm/netarm_mem_module.h
+ *
+ * Copyright (C) 2000, 2001 NETsilicon, Inc.
+ * Copyright (C) 2000, 2001 Red Hat, Inc.
+ *
+ * This software is copyrighted by Red Hat. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall Red Hat
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Joe deBlaquiere
+ */
+
+#ifndef __NETARM_MEM_MODULE_REGISTERS_H
+#define __NETARM_MEM_MODULE_REGISTERS_H
+
+/* GEN unit register offsets */
+
+#define NETARM_MEM_MODULE_BASE (0xFFC00000)
+
+#define NETARM_MEM_MODULE_CONFIG (0x00)
+#define NETARM_MEM_CS0_BASE_ADDR (0x10)
+#define NETARM_MEM_CS0_OPTIONS (0x14)
+#define NETARM_MEM_CS1_BASE_ADDR (0x20)
+#define NETARM_MEM_CS1_OPTIONS (0x24)
+#define NETARM_MEM_CS2_BASE_ADDR (0x30)
+#define NETARM_MEM_CS2_OPTIONS (0x34)
+#define NETARM_MEM_CS3_BASE_ADDR (0x40)
+#define NETARM_MEM_CS3_OPTIONS (0x44)
+#define NETARM_MEM_CS4_BASE_ADDR (0x50)
+#define NETARM_MEM_CS4_OPTIONS (0x54)
+
+/* select bitfield defintions */
+
+/* Module Configuration Register ( 0xFFC0_0000 ) */
+
+#define NETARM_MEM_CFG_REFR_COUNT_MASK (0xFF000000)
+#define NETARM_MEM_CFG_REFRESH_EN (0x00800000)
+
+#define NETARM_MEM_CFG_REFR_CYCLE_8CLKS (0x00000000)
+#define NETARM_MEM_CFG_REFR_CYCLE_6CLKS (0x00200000)
+#define NETARM_MEM_CFG_REFR_CYCLE_5CLKS (0x00400000)
+#define NETARM_MEM_CFG_REFR_CYCLE_4CLKS (0x00600000)
+
+#define NETARM_MEM_CFG_PORTC_AMUX (0x00100000)
+
+#define NETARM_MEM_CFG_A27_ADDR (0x00080000)
+#define NETARM_MEM_CFG_A27_CS0OE (0x00000000)
+
+#define NETARM_MEM_CFG_A26_ADDR (0x00040000)
+#define NETARM_MEM_CFG_A26_CS0WE (0x00000000)
+
+#define NETARM_MEM_CFG_A25_ADDR (0x00020000)
+#define NETARM_MEM_CFG_A25_BLAST (0x00000000)
+
+#define NETARM_MEM_CFG_PORTC_AMUX2 (0x00010000)
+
+
+/* range on this period is about 1 to 275 usec (with 18.432MHz clock) */
+/* the expression will round down, so make sure to reverse it to verify */
+/* it is what you want. period = [( count + 1 ) * 20] / Fcrystal */
+/* (note: Fxtal = Fcrystal/5, see HWRefGuide sections 8.2.5 and 11.3.2) */
+
+#define NETARM_MEM_REFR_PERIOD_USEC(p) (NETARM_MEM_CFG_REFR_COUNT_MASK & \
+ (((((NETARM_XTAL_FREQ/(1000))*p)/(20000) \
+ ) - (1) ) << (24)))
+
+#if 0
+/* range on this period is about 1 to 275 usec (with 18.432MHz clock) */
+/* the expression will round down, so make sure to reverse it toverify */
+/* it is what you want. period = [( count + 1 ) * 4] / Fxtal */
+
+#define NETARM_MEM_REFR_PERIOD_USEC(p) (NETARM_MEM_CFG_REFR_COUNT_MASK & \
+ (((((NETARM_XTAL_FREQ/(1000))*p)/(4000) \
+ ) - (1) ) << (24)))
+#endif
+
+/* Base Address Registers (0xFFC0_00X0) */
+
+#define NETARM_MEM_BAR_BASE_MASK (0xFFFFF000)
+
+/* macro to define base */
+
+#define NETARM_MEM_BAR_BASE(x) ((x) & NETARM_MEM_BAR_BASE_MASK)
+
+#define NETARM_MEM_BAR_DRAM_FP (0x00000000)
+#define NETARM_MEM_BAR_DRAM_EDO (0x00000100)
+#define NETARM_MEM_BAR_DRAM_SYNC (0x00000200)
+
+#define NETARM_MEM_BAR_DRAM_MUX_INT (0x00000000)
+#define NETARM_MEM_BAR_DRAM_MUX_EXT (0x00000080)
+
+#define NETARM_MEM_BAR_DRAM_MUX_BAL (0x00000000)
+#define NETARM_MEM_BAR_DRAM_MUX_UNBAL (0x00000020)
+
+#define NETARM_MEM_BAR_1BCLK_IDLE (0x00000010)
+
+#define NETARM_MEM_BAR_DRAM_SEL (0x00000008)
+
+#define NETARM_MEM_BAR_BURST_EN (0x00000004)
+
+#define NETARM_MEM_BAR_WRT_PROT (0x00000002)
+
+#define NETARM_MEM_BAR_VALID (0x00000001)
+
+/* Option Registers (0xFFC0_00X4) */
+
+/* macro to define which bits of the base are significant */
+
+#define NETARM_MEM_OPT_BASE_USE(x) ((x) & NETARM_MEM_BAR_BASE_MASK)
+
+#define NETARM_MEM_OPT_WAIT_MASK (0x00000F00)
+
+#define NETARM_MEM_OPT_WAIT_STATES(x) (((x) << 8 ) & NETARM_MEM_OPT_WAIT_MASK )
+
+#define NETARM_MEM_OPT_BCYC_1 (0x00000000)
+#define NETARM_MEM_OPT_BCYC_2 (0x00000040)
+#define NETARM_MEM_OPT_BCYC_3 (0x00000080)
+#define NETARM_MEM_OPT_BCYC_4 (0x000000C0)
+
+#define NETARM_MEM_OPT_BSIZE_2 (0x00000000)
+#define NETARM_MEM_OPT_BSIZE_4 (0x00000010)
+#define NETARM_MEM_OPT_BSIZE_8 (0x00000020)
+#define NETARM_MEM_OPT_BSIZE_16 (0x00000030)
+
+#define NETARM_MEM_OPT_32BIT (0x00000000)
+#define NETARM_MEM_OPT_16BIT (0x00000004)
+#define NETARM_MEM_OPT_8BIT (0x00000008)
+#define NETARM_MEM_OPT_32BIT_EXT_ACK (0x0000000C)
+
+#define NETARM_MEM_OPT_BUS_SIZE_MASK (0x0000000C)
+
+#define NETARM_MEM_OPT_READ_ASYNC (0x00000000)
+#define NETARM_MEM_OPT_READ_SYNC (0x00000002)
+
+#define NETARM_MEM_OPT_WRITE_ASYNC (0x00000000)
+#define NETARM_MEM_OPT_WRITE_SYNC (0x00000001)
+
+#endif
+
diff --git a/include/asm-arm/arch-arm720t/netarm_registers.h b/include/asm-arm/arch-arm720t/netarm_registers.h
new file mode 100644
index 00000000000..231a37843ec
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_registers.h
@@ -0,0 +1,80 @@
+/*
+ * linux/include/asm-arm/arch-netarm/netarm_registers.h
+ *
+ * Copyright (C) 2000, 2001 NETsilicon, Inc.
+ * Copyright (C) 2000, 2001 WireSpeed Communications Corporation
+ *
+ * This software is copyrighted by WireSpeed. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall WireSpeed
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Joe deBlaquiere
+ */
+
+#ifndef __NET_ARM_REGISTERS_H
+#define __NET_ARM_REGISTERS_H
+
+#include <config.h>
+
+/* fundamental constants : */
+/* the input crystal/clock frequency ( in Hz ) */
+#define NETARM_XTAL_FREQ_25MHz (18432000)
+#define NETARM_XTAL_FREQ_33MHz (23698000)
+#define NETARM_XTAL_FREQ_EMLIN1 (20000000)
+
+/* the frequency of SYS_CLK */
+#if defined(CONFIG_NETARM_EMLIN)
+
+/* EMLIN board: 33 MHz (exp.) */
+#define NETARM_PLL_COUNT_VAL 6
+#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz
+
+#elif defined(CONFIG_NETARM_NET40_REV2)
+
+/* NET+40 Rev2 boards: 33 MHz (with NETARM_XTAL_FREQ_25MHz) */
+#define NETARM_PLL_COUNT_VAL 6
+#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz
+
+#elif defined(CONFIG_NETARM_NET40_REV4)
+
+/* NET+40 Rev4 boards with EDO must clock slower: 25 MHz (with
+ NETARM_XTAL_FREQ_25MHz) 4 */
+#define NETARM_PLL_COUNT_VAL 4
+#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz
+
+#else /* CONFIG_NETARM_NET50 */
+
+/* NET+50 boards: 40 MHz (with NETARM_XTAL_FREQ_25MHz) */
+#define NETARM_PLL_COUNT_VAL 8
+#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz
+
+#endif
+
+/* #include "arm_registers.h" */
+#include <asm/arch/netarm_gen_module.h>
+#include <asm/arch/netarm_mem_module.h>
+#include <asm/arch/netarm_ser_module.h>
+#include <asm/arch/netarm_eni_module.h>
+#include <asm/arch/netarm_dma_module.h>
+#include <asm/arch/netarm_eth_module.h>
+
+#endif
+
diff --git a/include/asm-arm/arch-arm720t/netarm_ser_module.h b/include/asm-arm/arch-arm720t/netarm_ser_module.h
new file mode 100644
index 00000000000..fceabd173e6
--- /dev/null
+++ b/include/asm-arm/arch-arm720t/netarm_ser_module.h
@@ -0,0 +1,347 @@
+/*
+ * linux/include/asm-arm/arch-netarm/netarm_ser_module.h
+ *
+ * Copyright (C) 2000 NETsilicon, Inc.
+ * Copyright (C) 2000 Red Hat, Inc.
+ *
+ * This software is copyrighted by Red Hat. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall Red Hat
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Joe deBlaquiere
+ * Clark Williams
+ */
+
+#ifndef __NETARM_SER_MODULE_REGISTERS_H
+#define __NETARM_SER_MODULE_REGISTERS_H
+
+#ifndef __ASSEMBLER__
+
+/* (--sub)#include "types.h" */
+
+/* serial channel control structure */
+typedef struct {
+ u32 ctrl_a;
+ u32 ctrl_b;
+ u32 status_a;
+ u32 bitrate;
+ u32 fifo;
+ u32 rx_buf_timer;
+ u32 rx_char_timer;
+ u32 rx_match;
+ u32 rx_match_mask;
+ u32 ctrl_c;
+ u32 status_b;
+ u32 status_c;
+ u32 fifo_last;
+ u32 unused[3];
+} netarm_serial_channel_t;
+
+#endif
+
+/* SER unit register offsets */
+
+/* #ifdef CONFIG_ARCH_NETARM */
+#define NETARM_SER_MODULE_BASE (0xFFD00000)
+/* #else */
+/* extern serial_channel_t netarm_dummy_registers[]; */
+/* #define NETARM_SER_MODULE_BASE (netarm_dummy_registers) */
+/* #ifndef NETARM_XTAL_FREQ */
+/* #define NETARM_XTAL_FREQ 18432000 */
+/* #endif */
+/* #endif */
+
+/* calculate the sysclk value from the pll setting */
+#define NETARM_PLLED_SYSCLK_FREQ (( NETARM_XTAL_FREQ / 5 ) * \
+ ( NETARM_PLL_COUNT_VAL + 3 ))
+
+#define get_serial_channel(c) (&(((netarm_serial_channel_t *)NETARM_SER_MODULE_BASE)[c]))
+
+#define NETARM_SER_CH1_CTRL_A (0x00)
+#define NETARM_SER_CH1_CTRL_B (0x04)
+#define NETARM_SER_CH1_STATUS_A (0x08)
+#define NETARM_SER_CH1_BITRATE (0x0C)
+#define NETARM_SER_CH1_FIFO (0x10)
+#define NETARM_SER_CH1_RX_BUF_TMR (0x14)
+#define NETARM_SER_CH1_RX_CHAR_TMR (0x18)
+#define NETARM_SER_CH1_RX_MATCH (0x1c)
+#define NETARM_SER_CH1_RX_MATCH_MASK (0x20)
+#define NETARM_SER_CH1_CTRL_C (0x24)
+#define NETARM_SER_CH1_STATUS_B (0x28)
+#define NETARM_SER_CH1_STATUS_C (0x2c)
+#define NETARM_SER_CH1_FIFO_LAST (0x30)
+
+#define NETARM_SER_CH2_CTRL_A (0x40)
+#define NETARM_SER_CH2_CTRL_B (0x44)
+#define NETARM_SER_CH2_STATUS_A (0x48)
+#define NETARM_SER_CH2_BITRATE (0x4C)
+#define NETARM_SER_CH2_FIFO (0x50)
+#define NETARM_SER_CH2_RX_BUF_TMR (0x54)
+#define NETARM_SER_CH2_RX_CHAR_TMR (0x58)
+#define NETARM_SER_CH2_RX_MATCH (0x5c)
+#define NETARM_SER_CH2_RX_MATCH_MASK (0x60)
+#define NETARM_SER_CH2_CTRL_C (0x64)
+#define NETARM_SER_CH2_STATUS_B (0x68)
+#define NETARM_SER_CH2_STATUS_C (0x6c)
+#define NETARM_SER_CH2_FIFO_LAST (0x70)
+
+/* select bitfield defintions */
+
+/* Control Register A */
+
+#define NETARM_SER_CTLA_ENABLE (0x80000000)
+#define NETARM_SER_CTLA_BRK (0x40000000)
+
+#define NETARM_SER_CTLA_STICKP (0x20000000)
+
+#define NETARM_SER_CTLA_P_EVEN (0x18000000)
+#define NETARM_SER_CTLA_P_ODD (0x08000000)
+#define NETARM_SER_CTLA_P_NONE (0x00000000)
+
+/* if you read the errata, you will find that the STOP bits don't work right */
+#define NETARM_SER_CTLA_2STOP (0x00000000)
+#define NETARM_SER_CTLA_3STOP (0x04000000)
+
+#define NETARM_SER_CTLA_5BITS (0x00000000)
+#define NETARM_SER_CTLA_6BITS (0x01000000)
+#define NETARM_SER_CTLA_7BITS (0x02000000)
+#define NETARM_SER_CTLA_8BITS (0x03000000)
+
+#define NETARM_SER_CTLA_CTSTX (0x00800000)
+#define NETARM_SER_CTLA_RTSRX (0x00400000)
+
+#define NETARM_SER_CTLA_LOOP_REM (0x00200000)
+#define NETARM_SER_CTLA_LOOP_LOC (0x00100000)
+
+#define NETARM_SER_CTLA_GPIO2 (0x00080000)
+#define NETARM_SER_CTLA_GPIO1 (0x00040000)
+
+#define NETARM_SER_CTLA_DTR_EN (0x00020000)
+#define NETARM_SER_CTLA_RTS_EN (0x00010000)
+
+#define NETARM_SER_CTLA_IE_RX_BRK (0x00008000)
+#define NETARM_SER_CTLA_IE_RX_FRMERR (0x00004000)
+#define NETARM_SER_CTLA_IE_RX_PARERR (0x00002000)
+#define NETARM_SER_CTLA_IE_RX_OVERRUN (0x00001000)
+#define NETARM_SER_CTLA_IE_RX_RDY (0x00000800)
+#define NETARM_SER_CTLA_IE_RX_HALF (0x00000400)
+#define NETARM_SER_CTLA_IE_RX_FULL (0x00000200)
+#define NETARM_SER_CTLA_IE_RX_DMAEN (0x00000100)
+#define NETARM_SER_CTLA_IE_RX_DCD (0x00000080)
+#define NETARM_SER_CTLA_IE_RX_RI (0x00000040)
+#define NETARM_SER_CTLA_IE_RX_DSR (0x00000020)
+
+#define NETARM_SER_CTLA_IE_RX_ALL (NETARM_SER_CTLA_IE_RX_BRK \
+ |NETARM_SER_CTLA_IE_RX_FRMERR \
+ |NETARM_SER_CTLA_IE_RX_PARERR \
+ |NETARM_SER_CTLA_IE_RX_OVERRUN \
+ |NETARM_SER_CTLA_IE_RX_RDY \
+ |NETARM_SER_CTLA_IE_RX_HALF \
+ |NETARM_SER_CTLA_IE_RX_FULL \
+ |NETARM_SER_CTLA_IE_RX_DMAEN \
+ |NETARM_SER_CTLA_IE_RX_DCD \
+ |NETARM_SER_CTLA_IE_RX_RI \
+ |NETARM_SER_CTLA_IE_RX_DSR)
+
+#define NETARM_SER_CTLA_IE_TX_CTS (0x00000010)
+#define NETARM_SER_CTLA_IE_TX_EMPTY (0x00000008)
+#define NETARM_SER_CTLA_IE_TX_HALF (0x00000004)
+#define NETARM_SER_CTLA_IE_TX_FULL (0x00000002)
+#define NETARM_SER_CTLA_IE_TX_DMAEN (0x00000001)
+
+#define NETARM_SER_CTLA_IE_TX_ALL (NETARM_SER_CTLA_IE_TX_CTS \
+ |NETARM_SER_CTLA_IE_TX_EMPTY \
+ |NETARM_SER_CTLA_IE_TX_HALF \
+ |NETARM_SER_CTLA_IE_TX_FULL \
+ |NETARM_SER_CTLA_IE_TX_DMAEN)
+
+/* Control Register B */
+
+#define NETARM_SER_CTLB_MATCH1_EN (0x80000000)
+#define NETARM_SER_CTLB_MATCH2_EN (0x40000000)
+#define NETARM_SER_CTLB_MATCH3_EN (0x20000000)
+#define NETARM_SER_CTLB_MATCH4_EN (0x10000000)
+
+#define NETARM_SER_CTLB_RBGT_EN (0x08000000)
+#define NETARM_SER_CTLB_RCGT_EN (0x04000000)
+
+#define NETARM_SER_CTLB_UART_MODE (0x00000000)
+#define NETARM_SER_CTLB_HDLC_MODE (0x00100000)
+#define NETARM_SER_CTLB_SPI_MAS_MODE (0x00200000)
+#define NETARM_SER_CTLB_SPI_SLV_MODE (0x00300000)
+
+#define NETARM_SER_CTLB_REV_BIT_ORDER (0x00080000)
+
+#define NETARM_SER_CTLB_MAM1 (0x00040000)
+#define NETARM_SER_CTLB_MAM2 (0x00020000)
+
+/* Status Register A */
+
+#define NETARM_SER_STATA_MATCH1 (0x80000000)
+#define NETARM_SER_STATA_MATCH2 (0x40000000)
+#define NETARM_SER_STATA_MATCH3 (0x20000000)
+#define NETARM_SER_STATA_MATCH4 (0x10000000)
+
+#define NETARM_SER_STATA_BGAP (0x80000000)
+#define NETARM_SER_STATA_CGAP (0x40000000)
+
+#define NETARM_SER_STATA_RX_1B (0x00100000)
+#define NETARM_SER_STATA_RX_2B (0x00200000)
+#define NETARM_SER_STATA_RX_3B (0x00300000)
+#define NETARM_SER_STATA_RX_4B (0x00000000)
+
+/* downshifted values */
+
+#define NETARM_SER_STATA_RXFDB_1BYTES (0x001)
+#define NETARM_SER_STATA_RXFDB_2BYTES (0x002)
+#define NETARM_SER_STATA_RXFDB_3BYTES (0x003)
+#define NETARM_SER_STATA_RXFDB_4BYTES (0x000)
+
+#define NETARM_SER_STATA_RXFDB_MASK (0x00300000)
+#define NETARM_SER_STATA_RXFDB(x) (((x) & NETARM_SER_STATA_RXFDB_MASK) \
+ >> 20)
+
+#define NETARM_SER_STATA_DCD (0x00080000)
+#define NETARM_SER_STATA_RI (0x00040000)
+#define NETARM_SER_STATA_DSR (0x00020000)
+#define NETARM_SER_STATA_CTS (0x00010000)
+
+#define NETARM_SER_STATA_RX_BRK (0x00008000)
+#define NETARM_SER_STATA_RX_FRMERR (0x00004000)
+#define NETARM_SER_STATA_RX_PARERR (0x00002000)
+#define NETARM_SER_STATA_RX_OVERRUN (0x00001000)
+#define NETARM_SER_STATA_RX_RDY (0x00000800)
+#define NETARM_SER_STATA_RX_HALF (0x00000400)
+#define NETARM_SER_STATA_RX_CLOSED (0x00000200)
+#define NETARM_SER_STATA_RX_FULL (0x00000100)
+#define NETARM_SER_STATA_RX_DCD (0x00000080)
+#define NETARM_SER_STATA_RX_RI (0x00000040)
+#define NETARM_SER_STATA_RX_DSR (0x00000020)
+
+#define NETARM_SER_STATA_TX_CTS (0x00000010)
+#define NETARM_SER_STATA_TX_RDY (0x00000008)
+#define NETARM_SER_STATA_TX_HALF (0x00000004)
+#define NETARM_SER_STATA_TX_FULL (0x00000002)
+#define NETARM_SER_STATA_TX_DMAEN (0x00000001)
+
+/* you have to clear all receive signals to get the fifo to move forward */
+#define NETARM_SER_STATA_CLR_ALL (NETARM_SER_STATA_RX_BRK | \
+ NETARM_SER_STATA_RX_FRMERR | \
+ NETARM_SER_STATA_RX_PARERR | \
+ NETARM_SER_STATA_RX_OVERRUN | \
+ NETARM_SER_STATA_RX_HALF | \
+ NETARM_SER_STATA_RX_CLOSED | \
+ NETARM_SER_STATA_RX_FULL | \
+ NETARM_SER_STATA_RX_DCD | \
+ NETARM_SER_STATA_RX_RI | \
+ NETARM_SER_STATA_RX_DSR | \
+ NETARM_SER_STATA_TX_CTS )
+
+/* Bit Rate Registers */
+
+#define NETARM_SER_BR_EN (0x80000000)
+#define NETARM_SER_BR_TMODE (0x40000000)
+
+#define NETARM_SER_BR_RX_CLK_INT (0x00000000)
+#define NETARM_SER_BR_RX_CLK_EXT (0x20000000)
+#define NETARM_SER_BR_TX_CLK_INT (0x00000000)
+#define NETARM_SER_BR_TX_CLK_EXT (0x10000000)
+
+#define NETARM_SER_BR_RX_CLK_DRV (0x08000000)
+#define NETARM_SER_BR_TX_CLK_DRV (0x04000000)
+
+#define NETARM_SER_BR_CLK_EXT_5 (0x00000000)
+#define NETARM_SER_BR_CLK_SYSTEM (0x01000000)
+#define NETARM_SER_BR_CLK_OUT1A (0x02000000)
+#define NETARM_SER_BR_CLK_OUT2A (0x03000000)
+
+#define NETARM_SER_BR_TX_CLK_INV (0x00800000)
+#define NETARM_SER_BR_RX_CLK_INV (0x00400000)
+
+/* complete settings assuming system clock input is 18MHz */
+
+#define NETARM_SER_BR_MASK (0x000007FF)
+
+/* bit rate determined from equation Fbr = Fxtal / [ 10 * ( N + 1 ) ] */
+/* from section 7.5.4 of HW Ref Guide */
+
+/* #ifdef CONFIG_NETARM_PLL_BYPASS */
+#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \
+ NETARM_SER_BR_RX_CLK_INT | \
+ NETARM_SER_BR_TX_CLK_INT | \
+ NETARM_SER_BR_CLK_EXT_5 | \
+ ( ( ( ( NETARM_XTAL_FREQ / \
+ ( x * 10 ) ) - 1 ) / 16 ) & \
+ NETARM_SER_BR_MASK ) )
+/*
+#else
+#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \
+ NETARM_SER_BR_RX_CLK_INT | \
+ NETARM_SER_BR_TX_CLK_INT | \
+ NETARM_SER_BR_CLK_SYSTEM | \
+ ( ( ( ( NETARM_PLLED_SYSCLK_FREQ / \
+ ( x * 2 ) ) - 1 ) / 16 ) & \
+ NETARM_SER_BR_MASK ) )
+#endif
+*/
+
+/* Receive Buffer Gap Timer */
+
+#define NETARM_SER_RX_GAP_TIMER_EN (0x80000000)
+#define NETARM_SER_RX_GAP_MASK (0x00003FFF)
+
+/* rx gap is a function of bit rate x */
+
+/* #ifdef CONFIG_NETARM_PLL_BYPASS */
+#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
+ ( ( ( ( 10 * NETARM_XTAL_FREQ ) / \
+ ( x * 5 * 512 ) ) - 1 ) & \
+ NETARM_SER_RX_GAP_MASK ) )
+/*
+#else
+#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
+ ( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) / \
+ ( x * 512 ) ) - 1 ) & \
+ NETARM_SER_RX_GAP_MASK ) )
+#endif
+*/
+
+#if 0
+#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
+ ( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) / \
+ ( x * 5 * 512 ) ) - 1 ) & \
+ NETARM_SER_RX_GAP_MASK ) )
+#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \
+ ( ( ( ( 10 * NETARM_XTAL_FREQ ) / \
+ ( x * 512 ) ) - 1 ) & \
+ NETARM_SER_RX_GAP_MASK ) )
+#endif
+
+#define MIN_BAUD_RATE 600
+#define MAX_BAUD_RATE 115200
+
+/* the default BAUD rate for the BOOTLOADER, there is a separate */
+/* setting in the serial driver <arch/armnommu/drivers/char/serial-netarm.h> */
+#define DEFAULT_BAUD_RATE 9600
+#define NETARM_SER_FIFO_SIZE 32
+#define MIN_GAP 0
+
+#endif
diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h
index ebea56b8444..af5654cd675 100644
--- a/include/cmd_confdefs.h
+++ b/include/cmd_confdefs.h
@@ -85,6 +85,7 @@
#define CFG_CMD_MMC 0x0008000000000000U /* MMC support */
#define CFG_CMD_FAT 0x0010000000000000U /* FAT support */
#define CFG_CMD_IMLS 0x0020000000000000U /* List all found images */
+#define CFG_CMD_ITEST 0x0040000000000000U /* Integer (and string) test */
#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFU /* ALL commands */
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
new file mode 100644
index 00000000000..fd1b47c4fc4
--- /dev/null
+++ b/include/configs/modnet50.h
@@ -0,0 +1,179 @@
+/*
+ * (C) Copyright 2004
+ * IMMS, gGmbH <www.imms.de>
+ * Thomas Elste <info@elste.org>
+ *
+ * Configuation settings for ModNET50 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start u-boot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
+#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
+#define CONFIG_NETARM /* it's a Netsiclicon NET+ARM */
+#undef CONFIG_NETARM_NET40_REV2 /* it's a Net+40 Rev. 2 */
+#undef CONFIG_NETARM_NET40_REV4 /* it's a Net+40 Rev. 4 */
+#define CONFIG_NETARM_NET50 /* it's a Net+50 */
+
+#define CONFIG_MODNET50 1 /* on an ModNET50 Board */
+
+#undef CONFIG_USE_IRQ /* don't need them anymore */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_NETARMETH 1
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 38400
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_JFFS2))
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.30.2
+#define CONFIG_SERVERIP 192.168.30.122
+#define CFG_ETH_PHY_ADDR 0x100
+#define CONFIG_CMDLINE_TAG /* submit bootargs to kernel */
+
+/*#define CONFIG_BOOTDELAY 10*/
+/* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */
+#define CONFIG_BOOTCOMMAND "bootm 0x10020000 0x100a0000"
+#define CONFIG_BOOTARGS "console=ttyS0,38400 initrd=0x100a0040,530K root=/dev/ram keepinitrd"
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "modnet50 # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0x00500000 /* default load address */
+
+#define CFG_HZ 900 /* decrementer freq: 2 kHz */
+
+ /* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+*/
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */
+#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
+#define PHYS_SDRAM_2 0x01000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_2_SIZE 0x01000000 /* 16 MB */
+
+#define PHYS_FLASH_1 0x10000000 /* Flash Bank #1 */
+#define PHYS_FLASH_1_SIZE 0x00200000 /* 2 MB (one chip only, 16bit access) */
+
+#define PHYS_FLASH_2 0x10200001
+#define PHYS_FLASH_2_SIZE 0x00200000
+
+#define CONFIG_NETARM_EEPROM
+/* #ifdef CONFIG_NETARM_EEPROM */
+#define PHYS_NVRAM_1 0x20000000 /* EEPROM Bank #1 */
+#define PHYS_NVRAM_SIZE 0x00002000 /* 8 KB */
+/* #endif */
+
+#define PHYS_EXT_1 0x30000000 /* Extensions Bank #1 */
+#define PHYS_EXT_SIZE 0x01000000 /* 32 MB memory mapped I/O */
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CFG_FLASH_SIZE PHYS_FLASH_1_SIZE
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
+#define CFG_MAIN_SECT_SIZE 0x00010000 /* main size of sectors on one chip */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
+
+/* environment settings */
+#define CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_NOWHERE
+
+#define CFG_ENV_ADDR 0x1001C000 /* environment start address */
+#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x4000 /* max size for environment */
+
+/* Flash banks JFFS2 should use */
+#define CFG_JFFS2_FIRST_BANK 0
+#define CFG_JFFS2_FIRST_SECTOR 8
+#define CFG_JFFS2_NUM_BANKS 2
+
+#endif /* __CONFIG_H */
diff --git a/include/fat.h b/include/fat.h
index 8fffb420b6d..13910f984a2 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -67,6 +67,10 @@
#define DELETED_FLAG ((char)0xe5) /* Marks deleted files when in name[0] */
#define aRING 0x05 /* Used to represent 'å' in name[0] */
+/* Indicates that the entry is the last long entry in a set of long
+ * dir entries
+ */
+#define LAST_LONG_ENTRY_MASK 0x40
/* Flags telling whether we should read a file or list a directory */
#define LS_NO 0