summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-01-02 15:01:32 +0000
committerwdenk <wdenk>2004-01-02 15:01:32 +0000
commit63f3491242df8e6bd1b5df7296f28959989e2eaf (patch)
tree7af4bc5c75cdc9ee45cc4c7c6e144a79845b6ae6
parentd4ca31c40e8888b36635967522ec7ea03fd7e70b (diff)
* Patch by André Schwarz, 8 Dec 2003:
fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM): - TX and RX deskriptors must be quad-word aligned - does not work with only one TX deskriptor - standard reset method does not work * Patch by Masami Komiya, 08 Dec 2003: add RTL8139 ethernet driver * Patches by Ed Okerson, 07 Dec 2003: - fix ethernet for the AU1x00 processors in little-endian mode. - extend memsetup.S for the AU1x00 processors in BE and LE modes
-rw-r--r--CHANGELOG13
-rw-r--r--board/dbau1x00/memsetup.S386
-rw-r--r--cpu/mips/au1x00_eth.c9
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/dc2114x.c55
-rw-r--r--drivers/rtl8139.c539
-rw-r--r--net/eth.c4
7 files changed, 927 insertions, 81 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 4745c8f511e..2c8c336e264 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,19 @@
Changes since U-Boot 1.0.0:
======================================================================
+* Patch by André Schwarz, 8 Dec 2003:
+ fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
+ - TX and RX deskriptors must be quad-word aligned
+ - does not work with only one TX deskriptor
+ - standard reset method does not work
+
+* Patch by Masami Komiya, 08 Dec 2003:
+ add RTL8139 ethernet driver
+
+* Patches by Ed Okerson, 07 Dec 2003:
+ - fix ethernet for the AU1x00 processors in little-endian mode.
+ - extend memsetup.S for the AU1x00 processors in BE and LE modes
+
* Minor code cleanup (coding style)
* Patch by Reinhard Meyer, 30 Dec 2003:
diff --git a/board/dbau1x00/memsetup.S b/board/dbau1x00/memsetup.S
index 6c61e6fac35..d2a17a01b07 100644
--- a/board/dbau1x00/memsetup.S
+++ b/board/dbau1x00/memsetup.S
@@ -4,114 +4,358 @@
#include <version.h>
#include <asm/regdef.h>
#include <asm/au1x00.h>
+#include <asm/mipsregs.h>
+
+#define AU1500_SYS_ADDR 0xB1900000
+#define sys_endian 0x0038
+#define CP0_Config0 $16
+#define MEM_1MS ((396000000/1000000) * 1000)
+
+ .text
+ .set noreorder
+ .set mips32
.globl memsetup
memsetup:
+ /*
+ * Step 1) Establish CPU endian mode.
+ * Db1500-specific:
+ * Switch S1.1 Off(bit7 reads 1) is Little Endian
+ * Switch S1.1 On (bit7 reads 0) is Big Endian
+ */
+ li t0, MEM_STCFG1
+ li t1, 0x00000080
+ sw t1, 0(t0)
+
+ li t0, MEM_STTIME1
+ li t1, 0x22080a20
+ sw t1, 0(t0)
+
+ li t0, MEM_STADDR1
+ li t1, 0x10c03f00
+ sw t1, 0(t0)
+
+ li t0, 0xAE000008
+ lw t1,0(t0)
+ andi t1,t1,0x80
+ beq zero,t1,big_endian
+ nop
+little_endian:
+
+ /* Change Au1 core to little endian */
+ li t0, AU1500_SYS_ADDR
+ li t1, 1
+ sw t1, sys_endian(t0)
+ mfc0 t2, CP0_CONFIG
+ mtc0 t2, CP0_CONFIG
+ nop
+ nop
+
+ /* Big Endian is default so nothing to do but fall through */
+
+big_endian:
+
+ /*
+ * Step 2) Establish Status Register
+ * (set BEV, clear ERL, clear EXL, clear IE)
+ */
+ li t1, 0x00400000
+ mtc0 t1, CP0_STATUS
+
+ /*
+ * Step 3) Establish CP0 Config0
+ * (set OD, set K0=3)
+ */
+ li t1, 0x00080003
+ mtc0 t1, CP0_CONFIG
+
+ /*
+ * Step 4) Disable Watchpoint facilities
+ */
+ li t1, 0x00000000
+ mtc0 t1, CP0_WATCHLO
+ mtc0 t1, CP0_IWATCHLO
+ /*
+ * Step 5) Disable the performance counters
+ */
+ mtc0 zero, CP0_PERFORMANCE
+ nop
+
+ /*
+ * Step 6) Establish EJTAG Debug register
+ */
+ mtc0 zero, CP0_DEBUG
+ nop
+
+ /*
+ * Step 7) Establish Cause
+ * (set IV bit)
+ */
+ li t1, 0x00800000
+ mtc0 t1, CP0_CAUSE
+
+ /* Establish Wired (and Random) */
+ mtc0 zero, CP0_WIRED
+ nop
+
/* First setup pll:s to make serial work ok */
/* We have a 12 MHz crystal */
- li t0, SYS_CPUPLL
- li t1, 0x21 /* 396 MHz */
- sw t1, 0(t0)
+ li t0, SYS_CPUPLL
+ li t1, 0x21 /* 396 MHz */
+ sw t1, 0(t0)
sync
nop
+ nop
+ /* wait 1mS for clocks to settle */
+ li t1, MEM_1MS
+1: add t1, -1
+ bne t1, zero, 1b
+ nop
/* Setup AUX PLL */
- li t0, SYS_AUXPLL
- li t1, 8 /* 96 MHz */
- sw t1, 0(t0) /* aux pll */
+ li t0, SYS_AUXPLL
+ li t1, 0x20 /* 96 MHz */
+ sw t1, 0(t0) /* aux pll */
sync
-/* SDCS 0,1 SDRAM */
- li t0, MEM_SDMODE0
- li t1, 0x005522AA
- sw t1, 0(t0)
+ /* Static memory controller */
- li t0, MEM_SDMODE1
- li t1, 0x005522AA
- sw t1, 0(t0)
+ /* RCE0 AMD 29LV640M MirrorBit Flash */
+ li t0, MEM_STCFG0
+ li t1, 0x00000013
+ sw t1, 0(t0)
- li t0, MEM_SDADDR0
- li t1, 0x001003F8
- sw t1, 0(t0)
+ li t0, MEM_STTIME0
+ li t1, 0x040181D7
+ sw t1, 0(t0)
+ li t0, MEM_STADDR0
+ li t1, 0x11E03F80
+ sw t1, 0(t0)
- li t0, MEM_SDADDR1
- li t1, 0x001023F8
- sw t1, 0(t0)
- sync
+ /* RCE1 CPLD Board Logic */
+ li t0, MEM_STCFG1
+ li t1, 0x00000080
+ sw t1, 0(t0)
- li t0, MEM_SDREFCFG
- li t1, 0x64000C24 /* Disable */
- sw t1, 0(t0)
- sync
+ li t0, MEM_STTIME1
+ li t1, 0x22080a20
+ sw t1, 0(t0)
- li t0, MEM_SDPRECMD
- sw zero, 0(t0)
- sync
+ li t0, MEM_STADDR1
+ li t1, 0x10c03f00
+ sw t1, 0(t0)
+
+ /* RCE2 CPLD Board Logic */
+ li t0, MEM_STCFG2
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, MEM_STTIME2
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, MEM_STADDR2
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ /* RCE3 PCMCIA 250ns */
+ li t0, MEM_STCFG3
+ li t1, 0x00000002
+ sw t1, 0(t0)
+
+ li t0, MEM_STTIME3
+ li t1, 0x280E3E07
+ sw t1, 0(t0)
+
+ li t0, MEM_STADDR3
+ li t1, 0x10000000
+ sw t1, 0(t0)
- li t0, MEM_SDAUTOREF
- sw zero, 0(t0)
- sync
- sw zero, 0(t0)
sync
- li t0, MEM_SDREFCFG
- li t1, 0x66000C24 /* Enable */
- sw t1, 0(t0)
+ /* Set peripherals to a known state */
+ li t0, IC0_CFG0CLR
+ li t1, 0xFFFFFFFF
+ sw t1, 0(t0)
+
+ li t0, IC0_CFG0CLR
+ sw t1, 0(t0)
+
+ li t0, IC0_CFG1CLR
+ sw t1, 0(t0)
+
+ li t0, IC0_CFG2CLR
+ sw t1, 0(t0)
+
+ li t0, IC0_SRCSET
+ sw t1, 0(t0)
+
+ li t0, IC0_ASSIGNSET
+ sw t1, 0(t0)
+
+ li t0, IC0_WAKECLR
+ sw t1, 0(t0)
+
+ li t0, IC0_RISINGCLR
+ sw t1, 0(t0)
+
+ li t0, IC0_FALLINGCLR
+ sw t1, 0(t0)
+
+ li t0, IC0_TESTBIT
+ li t1, 0x00000000
+ sw t1, 0(t0)
sync
- li t0, MEM_SDWRMD0
- li t1, 0x00000033
- sw t1, 0(t0)
+ li t0, IC1_CFG0CLR
+ li t1, 0xFFFFFFFF
+ sw t1, 0(t0)
+
+ li t0, IC1_CFG0CLR
+ sw t1, 0(t0)
+
+ li t0, IC1_CFG1CLR
+ sw t1, 0(t0)
+
+ li t0, IC1_CFG2CLR
+ sw t1, 0(t0)
+
+ li t0, IC1_SRCSET
+ sw t1, 0(t0)
+
+ li t0, IC1_ASSIGNSET
+ sw t1, 0(t0)
+
+ li t0, IC1_WAKECLR
+ sw t1, 0(t0)
+
+ li t0, IC1_RISINGCLR
+ sw t1, 0(t0)
+
+ li t0, IC1_FALLINGCLR
+ sw t1, 0(t0)
+
+ li t0, IC1_TESTBIT
+ li t1, 0x00000000
+ sw t1, 0(t0)
sync
- li t0, MEM_SDWRMD1
- li t1, 0x00000033
- sw t1, 0(t0)
+ li t0, SYS_FREQCTRL0
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, SYS_FREQCTRL1
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, SYS_CLKSRC
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, SYS_PININPUTEN
+ li t1, 0x00000000
+ sw t1, 0(t0)
sync
- /* Static memory controller */
+ li t0, 0xB1100100
+ li t1, 0x00000000
+ sw t1, 0(t0)
- /* RCE0 AMD 29LV640M MirrorBit Flash */
- li t0, MEM_STCFG0
- li t1, 0x00000003
- sw t1, 0(t0)
+ li t0, 0xB1400100
+ li t1, 0x00000000
+ sw t1, 0(t0)
- li t0, MEM_STTIME0
- li t1, 0x22080b20
- sw t1, 0(t0)
- li t0, MEM_STADDR0
- li t1, 0x11E03F80
- sw t1, 0(t0)
+ li t0, SYS_WAKEMSK
+ li t1, 0x00000000
+ sw t1, 0(t0)
- /* RCE1 CPLD Board Logic */
- li t0, MEM_STCFG1
- li t1, 0x00000080
- sw t1, 0(t0)
+ li t0, SYS_WAKESRC
+ li t1, 0x00000000
+ sw t1, 0(t0)
- li t0, MEM_STTIME1
- li t1, 0x22080a20
- sw t1, 0(t0)
+ /* wait 1mS before setup */
+ li t1, MEM_1MS
+1: add t1, -1
+ bne t1, zero, 1b
+ nop
- li t0, MEM_STADDR1
- li t1, 0x10c03f00
- sw t1, 0(t0)
+/* SDCS 0,1 SDRAM */
+ li t0, MEM_SDMODE0
+ li t1, 0x005522AA
+ sw t1, 0(t0)
- /* RCE3 PCMCIA 250ns */
- li t0, MEM_STCFG3
- li t1, 0x00000002
- sw t1, 0(t0)
+ li t0, MEM_SDMODE1
+ li t1, 0x005522AA
+ sw t1, 0(t0)
+ li t0, MEM_SDMODE2
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ li t0, MEM_SDADDR0
+ li t1, 0x001003F8
+ sw t1, 0(t0)
+
+
+ li t0, MEM_SDADDR1
+ li t1, 0x001023F8
+ sw t1, 0(t0)
+
+ li t0, MEM_SDADDR2
+ li t1, 0x00000000
+ sw t1, 0(t0)
+
+ sync
+
+ li t0, MEM_SDREFCFG
+ li t1, 0x64000C24 /* Disable */
+ sw t1, 0(t0)
+ sync
+
+ li t0, MEM_SDPRECMD
+ sw zero, 0(t0)
+ sync
+
+ li t0, MEM_SDAUTOREF
+ sw zero, 0(t0)
+ sync
+ sw zero, 0(t0)
+ sync
+
+ li t0, MEM_SDREFCFG
+ li t1, 0x66000C24 /* Enable */
+ sw t1, 0(t0)
+ sync
+
+ li t0, MEM_SDWRMD0
+ li t1, 0x00000033
+ sw t1, 0(t0)
+ sync
+
+ li t0, MEM_SDWRMD1
+ li t1, 0x00000033
+ sw t1, 0(t0)
+ sync
+
+ /* wait 1mS after setup */
+ li t1, MEM_1MS
+1: add t1, -1
+ bne t1, zero, 1b
+ nop
- li t0, MEM_STTIME3
- li t1, 0x280E3E07
- sw t1, 0(t0)
+ li t0, SYS_PINFUNC
+ li t1, 0x00008080
+ sw t1, 0(t0)
- li t0, MEM_STADDR3
- li t1, 0x10000000
- sw t1, 0(t0)
+ li t0, SYS_TRIOUTCLR
+ li t1, 0x00001FFF
+ sw t1, 0(t0)
+ li t0, SYS_OUTPUTCLR
+ li t1, 0x00008000
+ sw t1, 0(t0)
sync
j ra
diff --git a/cpu/mips/au1x00_eth.c b/cpu/mips/au1x00_eth.c
index ae51b754a37..4f68a9b02a0 100644
--- a/cpu/mips/au1x00_eth.c
+++ b/cpu/mips/au1x00_eth.c
@@ -187,19 +187,24 @@ static int au1x00_init(struct eth_device* dev, bd_t * bd){
}
/* Put mac addr in little endian */
- /* FIXME Check this for little endian mode */
#define ea eth_get_dev()->enetaddr
*mac_addr_high = (ea[5] << 8) | (ea[4] ) ;
*mac_addr_low = (ea[3] << 24) | (ea[2] << 16) |
(ea[1] << 8) | (ea[0] ) ;
#undef ea
-
*mac_mcast_low = 0;
*mac_mcast_high = 0;
+ /* Make sure the MAC buffer is in the correct endian mode */
+#ifdef __LITTLE_ENDIAN
+ *mac_ctrl = MAC_FULL_DUPLEX;
+ udelay(1);
+ *mac_ctrl = MAC_FULL_DUPLEX|MAC_RX_ENABLE|MAC_TX_ENABLE;
+#else
*mac_ctrl = MAC_BIG_ENDIAN|MAC_FULL_DUPLEX;
udelay(1);
*mac_ctrl = MAC_BIG_ENDIAN|MAC_FULL_DUPLEX|MAC_RX_ENABLE|MAC_TX_ENABLE;
+#endif
return(1);
}
diff --git a/drivers/Makefile b/drivers/Makefile
index 1ee520f2a2a..15fb3788035 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -36,7 +36,7 @@ OBJS = 3c589.o 5701rls.o ali512x.o \
ns16550.o ns8382x.o ns87308.o \
pci.o pci_auto.o pci_indirect.o \
pcnet.o plb2800_eth.o \
- rtl8019.o \
+ rtl8019.o rtl8139.o \
s3c24x0_i2c.o sed13806.o serial.o \
serial_max3100.o \
smc91111.o smiLynxEM.o sym53c8xx.o \
diff --git a/drivers/dc2114x.c b/drivers/dc2114x.c
index 75bc618502b..9c7b5e9b69b 100644
--- a/drivers/dc2114x.c
+++ b/drivers/dc2114x.c
@@ -98,6 +98,15 @@
#define POLL_DEMAND 1
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+#define RESET_DM9102(dev) {\
+ unsigned long i;\
+ i=INL(dev, 0x0);\
+ udelay(1000);\
+ OUTL(dev, i | BMR_SWR, DE4X5_BMR);\
+ udelay(1000);\
+}
+#else
#define RESET_DE4X5(dev) {\
int i;\
i=INL(dev, DE4X5_BMR);\
@@ -109,6 +118,7 @@
for (i=0;i<5;i++) {INL(dev, DE4X5_BMR); udelay(10000);}\
udelay(1000);\
}
+#endif
#define START_DE4X5(dev) {\
s32 omr; \
@@ -125,7 +135,11 @@
}
#define NUM_RX_DESC PKTBUFSRX
-#define NUM_TX_DESC 1 /* Number of TX descriptors */
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+ #define NUM_TX_DESC 1 /* Number of TX descriptors */
+#else
+ #define NUM_TX_DESC 4
+#endif
#define RX_BUFF_SZ PKTSIZE_ALIGN
#define TOUT_LOOP 1000000
@@ -133,7 +147,6 @@
#define SETUP_FRAME_LEN 192
#define ETH_ALEN 6
-
struct de4x5_desc {
volatile s32 status;
u32 des1;
@@ -141,8 +154,8 @@ struct de4x5_desc {
u32 next;
};
-static struct de4x5_desc rx_ring[NUM_RX_DESC]; /* RX descriptor ring */
-static struct de4x5_desc tx_ring[NUM_TX_DESC]; /* TX descriptor ring */
+static struct de4x5_desc rx_ring[NUM_RX_DESC] __attribute__ ((aligned(32))); /* RX descriptor ring */
+static struct de4x5_desc tx_ring[NUM_TX_DESC] __attribute__ ((aligned(32))); /* TX descriptor ring */
static int rx_new; /* RX descriptor ring pointer */
static int tx_new; /* TX descriptor ring pointer */
@@ -188,6 +201,9 @@ static void OUTL(struct eth_device* dev, int command, u_long addr)
static struct pci_device_id supported[] = {
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST },
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142 },
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ { PCI_VENDOR_ID_DAVICOM, PCI_DEVICE_ID_DAVICOM_DM9102A },
+#endif
{ }
};
@@ -211,10 +227,12 @@ int dc21x4x_initialize(bd_t *bis)
/* Get the chip configuration revision register. */
pci_read_config_dword(devbusfn, PCI_REVISION_ID, &cfrv);
+#ifndef CONFIG_TULIP_FIX_DAVICOM
if ((cfrv & CFRV_RN) < DC2114x_BRK ) {
printf("Error: The chip is not DC21143.\n");
continue;
}
+#endif
pci_read_config_word(devbusfn, PCI_COMMAND, &status);
status |=
@@ -265,7 +283,12 @@ int dc21x4x_initialize(bd_t *bis)
dev = (struct eth_device*) malloc(sizeof *dev);
- sprintf(dev->name, "dc21x4x#%d", card_number);
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ sprintf(dev->name, "Davicom#%d", card_number);
+#else
+ sprintf(dev->name, "dc21x4x#%d", card_number);
+#endif
+
#ifdef CONFIG_TULIP_USE_IO
dev->iobase = pci_io_to_phys(devbusfn, iobase);
#else
@@ -282,8 +305,9 @@ int dc21x4x_initialize(bd_t *bis)
udelay(10 * 1000);
- read_hw_addr(dev, bis);
-
+#ifndef CONFIG_TULIP_FIX_DAVICOM
+ read_hw_addr(dev, bis);
+#endif
eth_register(dev);
card_number++;
@@ -300,7 +324,11 @@ static int dc21x4x_init(struct eth_device* dev, bd_t* bis)
/* Ensure we're not sleeping. */
pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP);
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ RESET_DM9102(dev);
+#else
RESET_DE4X5(dev);
+#endif
if ((INL(dev, DE4X5_STS) & (STS_TS | STS_RS)) != 0) {
printf("Error: Cannot reset ethernet controller.\n");
@@ -317,14 +345,23 @@ static int dc21x4x_init(struct eth_device* dev, bd_t* bis)
rx_ring[i].status = cpu_to_le32(R_OWN);
rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
rx_ring[i].buf = cpu_to_le32(phys_to_bus((u32) NetRxPackets[i]));
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ rx_ring[i].next = cpu_to_le32(phys_to_bus((u32) &rx_ring[(i+1) % NUM_RX_DESC]));
+#else
rx_ring[i].next = 0;
+#endif
}
for (i=0; i < NUM_TX_DESC; i++) {
tx_ring[i].status = 0;
tx_ring[i].des1 = 0;
tx_ring[i].buf = 0;
+
+#ifdef CONFIG_TULIP_FIX_DAVICOM
+ tx_ring[i].next = cpu_to_le32(phys_to_bus((u32) &tx_ring[(i+1) % NUM_TX_DESC]));
+#else
tx_ring[i].next = 0;
+#endif
}
rxRingSize = NUM_RX_DESC;
@@ -383,12 +420,14 @@ static int dc21x4x_send(struct eth_device* dev, volatile void *packet, int lengt
printf("TX error status = 0x%08X\n",
le32_to_cpu(tx_ring[tx_new].status));
#endif
+ tx_ring[tx_new].status = 0x0;
goto Done;
}
status = length;
Done:
+ tx_new = (tx_new+1) % NUM_TX_DESC;
return status;
}
@@ -485,6 +524,8 @@ static void send_setup_frame(struct eth_device* dev, bd_t *bis)
if (le32_to_cpu(tx_ring[tx_new].status) != 0x7FFFFFFF) {
printf("TX error status2 = 0x%08X\n", le32_to_cpu(tx_ring[tx_new].status));
}
+ tx_new = (tx_new+1) % NUM_TX_DESC;
+
Done:
return;
}
diff --git a/drivers/rtl8139.c b/drivers/rtl8139.c
new file mode 100644
index 00000000000..5b14e717dc9
--- /dev/null
+++ b/drivers/rtl8139.c
@@ -0,0 +1,539 @@
+/*
+ * rtl8139.c : U-Boot driver for the RealTek RTL8139
+ *
+ * Masami Komiya (mkomiya@sonare.it)
+ *
+ * Most part is taken from rtl8139.c of etherboot
+ *
+ */
+
+/* rtl8139.c - etherboot driver for the Realtek 8139 chipset
+
+ ported from the linux driver written by Donald Becker
+ by Rainer Bawidamann (Rainer.Bawidamann@informatik.uni-ulm.de) 1999
+
+ This software may be used and distributed according to the terms
+ of the GNU Public License, incorporated herein by reference.
+
+ changes to the original driver:
+ - removed support for interrupts, switching to polling mode (yuck!)
+ - removed support for the 8129 chip (external MII)
+
+*/
+
+/*********************************************************************/
+/* Revision History */
+/*********************************************************************/
+
+/*
+ 28 Dec 2002 ken_yap@users.sourceforge.net (Ken Yap)
+ Put in virt_to_bus calls to allow Etherboot relocation.
+
+ 06 Apr 2001 ken_yap@users.sourceforge.net (Ken Yap)
+ Following email from Hyun-Joon Cha, added a disable routine, otherwise
+ NIC remains live and can crash the kernel later.
+
+ 4 Feb 2000 espenlaub@informatik.uni-ulm.de (Klaus Espenlaub)
+ Shuffled things around, removed the leftovers from the 8129 support
+ that was in the Linux driver and added a bit more 8139 definitions.
+ Moved the 8K receive buffer to a fixed, available address outside the
+ 0x98000-0x9ffff range. This is a bit of a hack, but currently the only
+ way to make room for the Etherboot features that need substantial amounts
+ of code like the ANSI console support. Currently the buffer is just below
+ 0x10000, so this even conforms to the tagged boot image specification,
+ which reserves the ranges 0x00000-0x10000 and 0x98000-0xA0000. My
+ interpretation of this "reserved" is that Etherboot may do whatever it
+ likes, as long as its environment is kept intact (like the BIOS
+ variables). Hopefully fixed rtl_poll() once and for all. The symptoms
+ were that if Etherboot was left at the boot menu for several minutes, the
+ first eth_poll failed. Seems like I am the only person who does this.
+ First of all I fixed the debugging code and then set out for a long bug
+ hunting session. It took me about a week full time work - poking around
+ various places in the driver, reading Don Becker's and Jeff Garzik's Linux
+ driver and even the FreeBSD driver (what a piece of crap!) - and
+ eventually spotted the nasty thing: the transmit routine was acknowledging
+ each and every interrupt pending, including the RxOverrun and RxFIFIOver
+ interrupts. This confused the RTL8139 thoroughly. It destroyed the
+ Rx ring contents by dumping the 2K FIFO contents right where we wanted to
+ get the next packet. Oh well, what fun.
+
+ 18 Jan 2000 mdc@thinguin.org (Marty Connor)
+ Drastically simplified error handling. Basically, if any error
+ in transmission or reception occurs, the card is reset.
+ Also, pointed all transmit descriptors to the same buffer to
+ save buffer space. This should decrease driver size and avoid
+ corruption because of exceeding 32K during runtime.
+
+ 28 Jul 1999 (Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de)
+ rtl_poll was quite broken: it used the RxOK interrupt flag instead
+ of the RxBufferEmpty flag which often resulted in very bad
+ transmission performace - below 1kBytes/s.
+
+*/
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#ifdef __MIPS__
+static unsigned long mips_io_port_base = 0;
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+ defined(CONFIG_RTL8139)
+
+#define TICKS_PER_SEC CFG_HZ
+#define TICKS_PER_MS (TICKS_PER_SEC/1000)
+
+#define RTL_TIMEOUT (1*TICKS_PER_SEC)
+
+#define ETH_FRAME_LEN 1514
+#define ETH_ALEN 6
+#define ETH_ZLEN 60
+
+/* PCI Tuning Parameters
+ Threshold is bytes transferred to chip before transmission starts. */
+#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
+#define RX_FIFO_THRESH 4 /* Rx buffer level before first PCI xfer. */
+#define RX_DMA_BURST 4 /* Maximum PCI burst, '4' is 256 bytes */
+#define TX_DMA_BURST 4 /* Calculate as 16<<val. */
+#define NUM_TX_DESC 4 /* Number of Tx descriptor registers. */
+#define TX_BUF_SIZE ETH_FRAME_LEN /* FCS is added by the chip */
+#define RX_BUF_LEN_IDX 0 /* 0, 1, 2 is allowed - 8,16,32K rx buffer */
+#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
+
+#undef DEBUG_TX
+#undef DEBUG_RX
+
+#define currticks() get_timer(0)
+#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
+#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+
+/* Symbolic offsets to registers. */
+enum RTL8139_registers {
+ MAC0=0, /* Ethernet hardware address. */
+ MAR0=8, /* Multicast filter. */
+ TxStatus0=0x10, /* Transmit status (four 32bit registers). */
+ TxAddr0=0x20, /* Tx descriptors (also four 32bit). */
+ RxBuf=0x30, RxEarlyCnt=0x34, RxEarlyStatus=0x36,
+ ChipCmd=0x37, RxBufPtr=0x38, RxBufAddr=0x3A,
+ IntrMask=0x3C, IntrStatus=0x3E,
+ TxConfig=0x40, RxConfig=0x44,
+ Timer=0x48, /* general-purpose counter. */
+ RxMissed=0x4C, /* 24 bits valid, write clears. */
+ Cfg9346=0x50, Config0=0x51, Config1=0x52,
+ TimerIntrReg=0x54, /* intr if gp counter reaches this value */
+ MediaStatus=0x58,
+ Config3=0x59,
+ MultiIntr=0x5C,
+ RevisionID=0x5E, /* revision of the RTL8139 chip */
+ TxSummary=0x60,
+ MII_BMCR=0x62, MII_BMSR=0x64, NWayAdvert=0x66, NWayLPAR=0x68,
+ NWayExpansion=0x6A,
+ DisconnectCnt=0x6C, FalseCarrierCnt=0x6E,
+ NWayTestReg=0x70,
+ RxCnt=0x72, /* packet received counter */
+ CSCR=0x74, /* chip status and configuration register */
+ PhyParm1=0x78,TwisterParm=0x7c,PhyParm2=0x80, /* undocumented */
+ /* from 0x84 onwards are a number of power management/wakeup frame
+ * definitions we will probably never need to know about. */
+};
+
+enum ChipCmdBits {
+ CmdReset=0x10, CmdRxEnb=0x08, CmdTxEnb=0x04, RxBufEmpty=0x01, };
+
+/* Interrupt register bits, using my own meaningful names. */
+enum IntrStatusBits {
+ PCIErr=0x8000, PCSTimeout=0x4000, CableLenChange= 0x2000,
+ RxFIFOOver=0x40, RxUnderrun=0x20, RxOverflow=0x10,
+ TxErr=0x08, TxOK=0x04, RxErr=0x02, RxOK=0x01,
+};
+enum TxStatusBits {
+ TxHostOwns=0x2000, TxUnderrun=0x4000, TxStatOK=0x8000,
+ TxOutOfWindow=0x20000000, TxAborted=0x40000000,
+ TxCarrierLost=0x80000000,
+};
+enum RxStatusBits {
+ RxMulticast=0x8000, RxPhysical=0x4000, RxBroadcast=0x2000,
+ RxBadSymbol=0x0020, RxRunt=0x0010, RxTooLong=0x0008, RxCRCErr=0x0004,
+ RxBadAlign=0x0002, RxStatusOK=0x0001,
+};
+
+enum MediaStatusBits {
+ MSRTxFlowEnable=0x80, MSRRxFlowEnable=0x40, MSRSpeed10=0x08,
+ MSRLinkFail=0x04, MSRRxPauseFlag=0x02, MSRTxPauseFlag=0x01,
+};
+
+enum MIIBMCRBits {
+ BMCRReset=0x8000, BMCRSpeed100=0x2000, BMCRNWayEnable=0x1000,
+ BMCRRestartNWay=0x0200, BMCRDuplex=0x0100,
+};
+
+enum CSCRBits {
+ CSCR_LinkOKBit=0x0400, CSCR_LinkChangeBit=0x0800,
+ CSCR_LinkStatusBits=0x0f000, CSCR_LinkDownOffCmd=0x003c0,
+ CSCR_LinkDownCmd=0x0f3c0,
+};
+
+/* Bits in RxConfig. */
+enum rx_mode_bits {
+ RxCfgWrap=0x80,
+ AcceptErr=0x20, AcceptRunt=0x10, AcceptBroadcast=0x08,
+ AcceptMulticast=0x04, AcceptMyPhys=0x02, AcceptAllPhys=0x01,
+};
+
+static int ioaddr;
+static unsigned int cur_rx,cur_tx;
+
+/* The RTL8139 can only transmit from a contiguous, aligned memory block. */
+static unsigned char tx_buffer[TX_BUF_SIZE] __attribute__((aligned(4)));
+static unsigned char rx_ring[RX_BUF_LEN+16] __attribute__((aligned(4)));
+
+static int rtl8139_probe(struct eth_device *dev, bd_t *bis);
+static int read_eeprom(int location, int addr_len);
+static void rtl_reset(struct eth_device *dev);
+static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length);
+static int rtl_poll(struct eth_device *dev);
+static void rtl_disable(struct eth_device *dev);
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139},
+ {}
+};
+
+int rtl8139_initialize(bd_t *bis)
+{
+ pci_dev_t devno;
+ int card_number = 0;
+ struct eth_device *dev;
+ u32 iobase;
+ int idx=0;
+
+ while(1){
+ /* Find RTL8139 */
+ if ((devno = pci_find_devices(supported, idx++)) < 0)
+ break;
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+ iobase &= ~0xf;
+
+ debug ("rtl8139: REALTEK RTL8139 @0x%x\n", iobase);
+
+ dev = (struct eth_device *)malloc(sizeof *dev);
+
+ sprintf (dev->name, "RTL8139#%d", card_number);
+
+ dev->priv = (void *) devno;
+ dev->iobase = (int)bus_to_phys(iobase);
+ dev->init = rtl8139_probe;
+ dev->halt = rtl_disable;
+ dev->send = rtl_transmit;
+ dev->recv = rtl_poll;
+
+ eth_register (dev);
+
+ card_number++;
+
+ pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20);
+
+ udelay (10 * 1000);
+ }
+
+ return card_number;
+}
+
+static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
+{
+ int i;
+ int speed10, fullduplex;
+ int addr_len;
+ unsigned short *ap = (unsigned short *)dev->enetaddr;
+
+ ioaddr = dev->iobase;
+
+ /* Bring the chip out of low-power mode. */
+ outb(0x00, ioaddr + Config1);
+
+ addr_len = read_eeprom(0,8) == 0x8129 ? 8 : 6;
+ for (i = 0; i < 3; i++)
+ *ap++ = read_eeprom(i + 7, addr_len);
+
+ speed10 = inb(ioaddr + MediaStatus) & MSRSpeed10;
+ fullduplex = inw(ioaddr + MII_BMCR) & BMCRDuplex;
+
+ rtl_reset(dev);
+
+ if (inb(ioaddr + MediaStatus) & MSRLinkFail) {
+ printf("Cable not connected or other link failure\n");
+ return(0);
+ }
+
+ return 1;
+}
+
+/* Serial EEPROM section. */
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
+#define EE_CS 0x08 /* EEPROM chip select. */
+#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
+#define EE_WRITE_0 0x00
+#define EE_WRITE_1 0x02
+#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
+#define EE_ENB (0x80 | EE_CS)
+
+/*
+ Delay between EEPROM clock transitions.
+ No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
+*/
+
+#define eeprom_delay() inl(ee_addr)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD (5)
+#define EE_READ_CMD (6)
+#define EE_ERASE_CMD (7)
+
+static int read_eeprom(int location, int addr_len)
+{
+ int i;
+ unsigned int retval = 0;
+ long ee_addr = ioaddr + Cfg9346;
+ int read_cmd = location | (EE_READ_CMD << addr_len);
+
+ outb(EE_ENB & ~EE_CS, ee_addr);
+ outb(EE_ENB, ee_addr);
+ eeprom_delay();
+
+ /* Shift the read command bits out. */
+ for (i = 4 + addr_len; i >= 0; i--) {
+ int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+ outb(EE_ENB | dataval, ee_addr);
+ eeprom_delay();
+ outb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+ eeprom_delay();
+ }
+ outb(EE_ENB, ee_addr);
+ eeprom_delay();
+
+ for (i = 16; i > 0; i--) {
+ outb(EE_ENB | EE_SHIFT_CLK, ee_addr);
+ eeprom_delay();
+ retval = (retval << 1) | ((inb(ee_addr) & EE_DATA_READ) ? 1 : 0);
+ outb(EE_ENB, ee_addr);
+ eeprom_delay();
+ }
+
+ /* Terminate the EEPROM access. */
+ outb(~EE_CS, ee_addr);
+ eeprom_delay();
+ return retval;
+}
+
+static const unsigned int rtl8139_rx_config =
+ (RX_BUF_LEN_IDX << 11) |
+ (RX_FIFO_THRESH << 13) |
+ (RX_DMA_BURST << 8);
+
+static void set_rx_mode(struct eth_device *dev) {
+ unsigned int mc_filter[2];
+ int rx_mode;
+ /* !IFF_PROMISC */
+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+
+ outl(rtl8139_rx_config | rx_mode, ioaddr + RxConfig);
+
+ outl(mc_filter[0], ioaddr + MAR0 + 0);
+ outl(mc_filter[1], ioaddr + MAR0 + 4);
+}
+
+static void rtl_reset(struct eth_device *dev)
+{
+ int i;
+
+ outb(CmdReset, ioaddr + ChipCmd);
+
+ cur_rx = 0;
+ cur_tx = 0;
+
+ /* Give the chip 10ms to finish the reset. */
+ for (i=0; i<100; ++i){
+ if ((inb(ioaddr + ChipCmd) & CmdReset) == 0) break;
+ udelay (100); /* wait 100us */
+ }
+
+
+ for (i = 0; i < ETH_ALEN; i++)
+ outb(dev->enetaddr[i], ioaddr + MAC0 + i);
+
+ /* Must enable Tx/Rx before setting transfer thresholds! */
+ outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
+ outl((RX_FIFO_THRESH<<13) | (RX_BUF_LEN_IDX<<11) | (RX_DMA_BURST<<8),
+ ioaddr + RxConfig); /* accept no frames yet! */
+ outl((TX_DMA_BURST<<8)|0x03000000, ioaddr + TxConfig);
+
+ /* The Linux driver changes Config1 here to use a different LED pattern
+ * for half duplex or full/autodetect duplex (for full/autodetect, the
+ * outputs are TX/RX, Link10/100, FULL, while for half duplex it uses
+ * TX/RX, Link100, Link10). This is messy, because it doesn't match
+ * the inscription on the mounting bracket. It should not be changed
+ * from the configuration EEPROM default, because the card manufacturer
+ * should have set that to match the card. */
+
+#ifdef DEBUG_RX
+ printf("rx ring address is %X\n",(unsigned long)rx_ring);
+#endif
+ outl(phys_to_bus((int)rx_ring), ioaddr + RxBuf);
+
+ /* If we add multicast support, the MAR0 register would have to be
+ * initialized to 0xffffffffffffffff (two 32 bit accesses). Etherboot
+ * only needs broadcast (for ARP/RARP/BOOTP/DHCP) and unicast. */
+
+ outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
+
+ outl(rtl8139_rx_config, ioaddr + RxConfig);
+
+ /* Start the chip's Tx and Rx process. */
+ outl(0, ioaddr + RxMissed);
+
+ /* set_rx_mode */
+ set_rx_mode(dev);
+
+ /* Disable all known interrupts by setting the interrupt mask. */
+ outw(0, ioaddr + IntrMask);
+}
+
+static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length)
+{
+ unsigned int status, to;
+ unsigned long txstatus;
+ unsigned int len = length;
+
+ ioaddr = dev->iobase;
+
+ memcpy((char *)tx_buffer, (char *)packet, (int)length);
+
+#ifdef DEBUG_TX
+ printf("sending %d bytes\n", len);
+#endif
+
+ /* Note: RTL8139 doesn't auto-pad, send minimum payload (another 4
+ * bytes are sent automatically for the FCS, totalling to 64 bytes). */
+ while (len < ETH_ZLEN) {
+ tx_buffer[len++] = '\0';
+ }
+
+ outl(phys_to_bus((int)tx_buffer), ioaddr + TxAddr0 + cur_tx*4);
+ outl(((TX_FIFO_THRESH<<11) & 0x003f0000) | len,
+ ioaddr + TxStatus0 + cur_tx*4);
+
+ to = currticks() + RTL_TIMEOUT;
+
+ do {
+ status = inw(ioaddr + IntrStatus);
+ /* Only acknlowledge interrupt sources we can properly handle
+ * here - the RxOverflow/RxFIFOOver MUST be handled in the
+ * rtl_poll() function. */
+ outw(status & (TxOK | TxErr | PCIErr), ioaddr + IntrStatus);
+ if ((status & (TxOK | TxErr | PCIErr)) != 0) break;
+ } while (currticks() < to);
+
+ txstatus = inl(ioaddr + TxStatus0 + cur_tx*4);
+
+ if (status & TxOK) {
+ cur_tx = (cur_tx + 1) % NUM_TX_DESC;
+#ifdef DEBUG_TX
+ printf("tx done (%d ticks), status %hX txstatus %X\n",
+ to-currticks(), status, txstatus);
+#endif
+ return length;
+ } else {
+#ifdef DEBUG_TX
+ printf("tx timeout/error (%d ticks), status %hX txstatus %X\n",
+ currticks()-to, status, txstatus);
+#endif
+ rtl_reset(dev);
+
+ return 0;
+ }
+}
+
+static int rtl_poll(struct eth_device *dev)
+{
+ unsigned int status;
+ unsigned int ring_offs;
+ unsigned int rx_size, rx_status;
+ int length=0;
+
+ ioaddr = dev->iobase;
+
+ if (inb(ioaddr + ChipCmd) & RxBufEmpty) {
+ return 0;
+ }
+
+ status = inw(ioaddr + IntrStatus);
+ /* See below for the rest of the interrupt acknowledges. */
+ outw(status & ~(RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
+
+#ifdef DEBUG_RX
+ printf("rtl_poll: int %hX ", status);
+#endif
+
+ ring_offs = cur_rx % RX_BUF_LEN;
+ rx_status = *(unsigned int*)KSEG1ADDR((rx_ring + ring_offs));
+ rx_size = rx_status >> 16;
+ rx_status &= 0xffff;
+
+ if ((rx_status & (RxBadSymbol|RxRunt|RxTooLong|RxCRCErr|RxBadAlign)) ||
+ (rx_size < ETH_ZLEN) || (rx_size > ETH_FRAME_LEN + 4)) {
+ printf("rx error %hX\n", rx_status);
+ rtl_reset(dev); /* this clears all interrupts still pending */
+ return 0;
+ }
+
+ /* Received a good packet */
+ length = rx_size - 4; /* no one cares about the FCS */
+ if (ring_offs+4+rx_size-4 > RX_BUF_LEN) {
+ int semi_count = RX_BUF_LEN - ring_offs - 4;
+ unsigned char rxdata[RX_BUF_LEN];
+
+ memcpy(rxdata, rx_ring + ring_offs + 4, semi_count);
+ memcpy(&(rxdata[semi_count]), rx_ring, rx_size-4-semi_count);
+
+ NetReceive(rxdata, length);
+#ifdef DEBUG_RX
+ printf("rx packet %d+%d bytes", semi_count,rx_size-4-semi_count);
+#endif
+ } else {
+ NetReceive(rx_ring + ring_offs + 4, length);
+#ifdef DEBUG_RX
+ printf("rx packet %d bytes", rx_size-4);
+#endif
+ }
+
+ cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
+ outw(cur_rx - 16, ioaddr + RxBufPtr);
+ /* See RTL8139 Programming Guide V0.1 for the official handling of
+ * Rx overflow situations. The document itself contains basically no
+ * usable information, except for a few exception handling rules. */
+ outw(status & (RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
+ return length;
+}
+
+static void rtl_disable(struct eth_device *dev)
+{
+ int i;
+
+ /* reset the chip */
+ outb(CmdReset, ioaddr + ChipCmd);
+
+ /* Give the chip 10ms to finish the reset. */
+ for (i=0; i<100; ++i){
+ if ((inb(ioaddr + ChipCmd) & CmdReset) == 0) break;
+ udelay (100); /* wait 100us */
+ }
+}
+#endif /* CFG_CMD_NET && CONFIG_NET_MULTI && CONFIG_RTL8139 */
diff --git a/net/eth.c b/net/eth.c
index f295782e8ae..e60098f5d04 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -47,6 +47,7 @@ extern int mpc5xxx_fec_initialize(bd_t*);
extern int skge_initialize(bd_t*);
extern int tsec_initialize(bd_t*);
extern int au1x00_enet_initialize(bd_t*);
+extern int rtl8139_initialize(bd_t*);
static struct eth_device *eth_devices, *eth_current;
@@ -154,6 +155,9 @@ int eth_initialize(bd_t *bis)
#if defined(CONFIG_AU1X00)
au1x00_enet_initialize(bis);
#endif
+#if defined(CONFIG_RTL8139)
+ rtl8139_initialize(bis);
+#endif
if (!eth_devices) {
puts ("No ethernet found.\n");