ENGR00137791 MX53: Update for MFG tool

- Add MFG tool support for MX53 SMD and MX53 LOCO
  boards
- Update mx53 ARD MFG defconfig to pass compile

Signed-off-by: Lily Zhang <r58066@freescale.com>

5 files changed, 504 insertions, 9 deletions

diff --git a/Makefile b/Makefile
index 978c05f46d..1e7093e050 100644
--- a/Makefile
+++ b/Makefile
@@ -3276,9 +3276,12 @@ mx51_3stack_android_config	\
 mx51_3stack_config	: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51_3stack freescale mx51
 
+mx53_smd_mfg_config             \
 mx53_smd_android_config		\
 mx53_smd_config		:unconfig
 	$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx53_smd freescale mx53
+
+mx53_loco_mfg_config		\
 mx53_loco_config	:unconfig
 	$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx53_loco freescale mx53
 
diff --git a/board/freescale/mx53_ard/mx53_ard.c b/board/freescale/mx53_ard/mx53_ard.c
index ffc2498c46..8fddfdab4d 100755
--- a/board/freescale/mx53_ard/mx53_ard.c
+++ b/board/freescale/mx53_ard/mx53_ard.c
@@ -1,7 +1,7 @@
 /*
  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
  *
- * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * (C) Copyright 2009-2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -524,17 +524,10 @@ void weim_cs1_settings()
 
 #ifdef CONFIG_CMD_MMC
 
-#if defined(CONFIG_MX53_ARD)
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
 	{MMC_SDHC1_BASE_ADDR, 1, 1},
 	{MMC_SDHC2_BASE_ADDR, 1, 1},
 };
-#else
-struct fsl_esdhc_cfg esdhc_cfg[2] = {
-	{MMC_SDHC1_BASE_ADDR, 1, 1},
-	{MMC_SDHC3_BASE_ADDR, 1, 1},
-};
-#endif
 
 #ifdef CONFIG_DYNAMIC_MMC_DEVNO
 int get_mmc_env_devno()
diff --git a/include/configs/mx53_ard_mfg.h b/include/configs/mx53_ard_mfg.h
index 488d4d175a..b8cfa901f7 100755
--- a/include/configs/mx53_ard_mfg.h
+++ b/include/configs/mx53_ard_mfg.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
  *
  * MFG Configuration settings for the MX53-ARD Freescale board.
  *
@@ -95,6 +95,7 @@
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_DNS
+#define CONFIG_CMD_IIM
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_ENV
 
@@ -150,6 +151,15 @@
 #define CONFIG_DISCOVER_PHY
 
 /*
+ * FUSE Configs
+  * */
+#ifdef CONFIG_CMD_IIM
+	#define CONFIG_IMX_IIM
+	#define IMX_IIM_BASE    IIM_BASE_ADDR
+	#define CONFIG_IIM_MAC_BANK     1
+	#define CONFIG_IIM_MAC_ROW      9
+#endif
+/*
  * I2C Configs
  */
 #define CONFIG_CMD_I2C          1
diff --git a/include/configs/mx53_loco_mfg.h b/include/configs/mx53_loco_mfg.h
new file mode 100644
index 0000000000..b4ca85230c
--- /dev/null
+++ b/include/configs/mx53_loco_mfg.h
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX53-LOCO Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx53.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_MFG    1
+#define CONFIG_ARMV7		/* This is armv7 Cortex-A8 CPU core */
+#define CONFIG_MXC
+#define CONFIG_MX53
+#define CONFIG_MX53_LOCO
+#define CONFIG_FLASH_HEADER
+#define CONFIG_FLASH_HEADER_OFFSET 0x400
+#define CONFIG_MX53_CLK32	32768
+
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_ARCH_MMU
+
+#define CONFIG_MX53_HCLK_FREQ	24000000
+#define CONFIG_SYS_PLL2_FREQ    400
+#define CONFIG_SYS_AHB_PODF     2
+#define CONFIG_SYS_AXIA_PODF    0
+#define CONFIG_SYS_AXIB_PODF    1
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+#define BOARD_LATE_INIT
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_NET_RETRY_COUNT  100
+#define CONFIG_NET_MULTI 1
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_ENV
+
+#define CONFIG_CMD_IIM
+
+#define CONFIG_CMD_CLOCK
+#define CONFIG_REF_CLK_FREQ CONFIG_MX53_HCLK_FREQ
+
+#define CONFIG_CMD_SATA
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY	0
+
+#define CONFIG_PRIME	"FEC0"
+
+#define CONFIG_LOADADDR		0x70800000	/* loadaddr env var */
+#define CONFIG_RD_LOADADDR	(CONFIG_LOADADDR + 0x300000)
+
+#define CONFIG_BOOTARGS	"console=ttymxc0,115200 "\
+		"rdinit=/linuxrc"
+#define CONFIG_BOOTCOMMAND	"bootm 0x70800000 0x70B00000"
+#define CONFIG_ENV_IS_EMBEDDED
+#define CONFIG_ARP_TIMEOUT	200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"MX53-LOCO-MFG U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10000
+
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ				1000
+
+#define CONFIG_CMDLINE_EDITING	1
+
+#define CONFIG_FEC0_IOBASE	FEC_BASE_ADDR
+#define CONFIG_FEC0_PINMUX	-1
+#define CONFIG_FEC0_PHY_ADDR	-1
+#define CONFIG_FEC0_MIIBASE	-1
+
+#define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM
+#define CONFIG_IIM_MAC_ADDR_OFFSET      0x24
+
+#define CONFIG_MXC_FEC
+#define CONFIG_MII
+#define CONFIG_MII_GASKET
+#define CONFIG_DISCOVER_PHY
+
+/*
+ * FUSE Configs
+ * */
+#ifdef CONFIG_CMD_IIM
+	#define CONFIG_IMX_IIM
+	#define IMX_IIM_BASE    IIM_BASE_ADDR
+	#define CONFIG_IIM_MAC_BANK     1
+	#define CONFIG_IIM_MAC_ROW      9
+#endif
+
+/*
+ * I2C Configs
+ */
+#define CONFIG_CMD_I2C          1
+#define CONFIG_HARD_I2C         1
+#define CONFIG_I2C_MXC          1
+#define CONFIG_SYS_I2C_PORT             I2C1_BASE_ADDR
+#define CONFIG_SYS_I2C_SPEED            100000
+#define CONFIG_SYS_I2C_SLAVE            0xfe
+
+/*
+ * MMC Configs
+ */
+#ifdef CONFIG_CMD_MMC
+	#define CONFIG_MMC				1
+	#define CONFIG_GENERIC_MMC
+	#define CONFIG_IMX_MMC
+	#define CONFIG_SYS_FSL_ESDHC_NUM        2
+	#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+	#define CONFIG_SYS_MMC_ENV_DEV  0
+	#define CONFIG_DOS_PARTITION	1
+	#define CONFIG_CMD_FAT		1
+	#define CONFIG_CMD_EXT2		1
+
+	/* detect whether ESDHC1 or ESDHC3 is boot device */
+	#define CONFIG_DYNAMIC_MMC_DEVNO
+
+	#define CONFIG_BOOT_PARTITION_ACCESS
+	#define CONFIG_EMMC_DDR_MODE
+	/* port 1 (ESDHC3) is 8 bit */
+	#define CONFIG_MMC_8BIT_PORTS	0x2
+
+#endif
+
+/*
+ * SATA Configs
+ */
+#ifdef CONFIG_CMD_SATA
+  #define CONFIG_DWC_AHSATA
+  #define CONFIG_SYS_SATA_MAX_DEVICE      1
+  #define CONFIG_DWC_AHSATA_PORT_ID       0
+  #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
+  #define CONFIG_LBA48
+  #define CONFIG_LIBATA
+#endif
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	2
+#define PHYS_SDRAM_1		CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
+#define PHYS_SDRAM_2		CSD1_BASE_ADDR
+#define PHYS_SDRAM_2_SIZE	(512 * 1024 * 1024)
+#define iomem_valid_addr(addr, size) \
+	((addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)) \
+	|| (addr >= PHYS_SDRAM_2 && addr <= (PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE)))
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SECT_SIZE    (128 * 1024)
+#define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
+
+#define CONFIG_ENV_IS_NOWHERE
+
+#endif				/* __CONFIG_H */
diff --git a/include/configs/mx53_smd_mfg.h b/include/configs/mx53_smd_mfg.h
new file mode 100644
index 0000000000..2a2e4cd7ec
--- /dev/null
+++ b/include/configs/mx53_smd_mfg.h
@@ -0,0 +1,245 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX53-SMD Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx53.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_MFG	1
+#define CONFIG_ARMV7		/* This is armv7 Cortex-A8 CPU core */
+#define CONFIG_MXC
+#define CONFIG_MX53
+#define CONFIG_MX53_SMD
+#define CONFIG_FLASH_HEADER
+#define CONFIG_FLASH_HEADER_OFFSET 0x400
+#define CONFIG_MX53_CLK32	32768
+
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_ARCH_MMU
+
+#define CONFIG_MX53_HCLK_FREQ	24000000
+#define CONFIG_SYS_PLL2_FREQ    400
+#define CONFIG_SYS_AHB_PODF     2
+#define CONFIG_SYS_AXIA_PODF    0
+#define CONFIG_SYS_AXIB_PODF    1
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+#define BOARD_LATE_INIT
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MXC_UART 1
+#define CONFIG_UART_BASE_ADDR   UART1_BASE_ADDR
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_NET_RETRY_COUNT  100
+#define CONFIG_NET_MULTI 1
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_ENV
+
+#define CONFIG_CMD_IIM
+
+#define CONFIG_CMD_CLOCK
+#define CONFIG_REF_CLK_FREQ CONFIG_MX53_HCLK_FREQ
+
+#define CONFIG_CMD_SATA
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY	0
+
+#define CONFIG_PRIME	"FEC0"
+
+#define CONFIG_LOADADDR		0x70800000	/* loadaddr env var */
+#define CONFIG_RD_LOADADDR	(CONFIG_LOADADDR + 0x300000)
+
+#define CONFIG_BOOTARGS	"console=ttymxc0,115200 "\
+			"rdinit=/linuxrc"
+#define CONFIG_BOOTCOMMAND	"bootm 0x70800000 0x70B00000"
+#define CONFIG_ENV_IS_EMBEDDED
+
+#define CONFIG_ARP_TIMEOUT	200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"MX53-SMD-MFG U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10000
+
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ				1000
+
+#define CONFIG_CMDLINE_EDITING	1
+
+#define CONFIG_FEC0_IOBASE	FEC_BASE_ADDR
+#define CONFIG_FEC0_PINMUX	-1
+#define CONFIG_FEC0_PHY_ADDR	-1
+#define CONFIG_FEC0_MIIBASE	-1
+
+#define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM
+#define CONFIG_IIM_MAC_ADDR_OFFSET      0x24
+
+#define CONFIG_MXC_FEC
+#define CONFIG_MII
+#define CONFIG_MII_GASKET
+#define CONFIG_DISCOVER_PHY
+
+/*
+ * FUSE Configs
+ * */
+#ifdef CONFIG_CMD_IIM
+	#define CONFIG_IMX_IIM
+	#define IMX_IIM_BASE    IIM_BASE_ADDR
+	#define CONFIG_IIM_MAC_BANK     1
+	#define CONFIG_IIM_MAC_ROW      9
+#endif
+
+/*
+ * I2C Configs
+ */
+#define CONFIG_CMD_I2C          1
+#define CONFIG_HARD_I2C         1
+#define CONFIG_I2C_MXC          1
+#define CONFIG_SYS_I2C_PORT             I2C1_BASE_ADDR
+#define CONFIG_SYS_I2C_SPEED            100000
+#define CONFIG_SYS_I2C_SLAVE            0xfe
+
+/*
+ * MMC Configs
+ */
+#ifdef CONFIG_CMD_MMC
+	#define CONFIG_MMC				1
+	#define CONFIG_GENERIC_MMC
+	#define CONFIG_IMX_MMC
+	#define CONFIG_SYS_FSL_ESDHC_NUM        2
+	#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+	#define CONFIG_SYS_MMC_ENV_DEV  0
+	#define CONFIG_DOS_PARTITION	1
+	#define CONFIG_CMD_FAT		1
+	#define CONFIG_CMD_EXT2		1
+
+	/* detect whether ESDHC1 or ESDHC3 is boot device */
+	#define CONFIG_DYNAMIC_MMC_DEVNO
+
+	#define CONFIG_BOOT_PARTITION_ACCESS
+	#define CONFIG_EMMC_DDR_MODE
+	/* port 1 (ESDHC3) is 8 bit */
+	#define CONFIG_MMC_8BIT_PORTS	0x2
+
+#endif
+
+/*
+ * SATA Configs
+ */
+#ifdef CONFIG_CMD_SATA
+  #define CONFIG_DWC_AHSATA
+  #define CONFIG_SYS_SATA_MAX_DEVICE      1
+  #define CONFIG_DWC_AHSATA_PORT_ID       0
+  #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
+  #define CONFIG_LBA48
+  #define CONFIG_LIBATA
+#endif
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	2
+#define PHYS_SDRAM_1		CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
+#define PHYS_SDRAM_2		CSD1_BASE_ADDR
+#define PHYS_SDRAM_2_SIZE	(512 * 1024 * 1024)
+#define iomem_valid_addr(addr, size) \
+	((addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)) \
+	|| (addr >= PHYS_SDRAM_2 && addr <= (PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE)))
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SECT_SIZE    (128 * 1024)
+#define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
+
+#define CONFIG_ENV_IS_NOWHERE
+
+#endif				/* __CONFIG_H */