diff options
author | Marek Vasut <marex@denx.de> | 2019-11-26 09:39:12 +0100 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2019-12-06 13:57:42 +0100 |
commit | edaec532120a12facf91d317e8884ec84d22316a (patch) | |
tree | 963bd1b0f92d6106cf6caf0b4b65a1729332e303 | |
parent | b6b6c1d7bdd51ac313831edb7b5cbff3f1b38170 (diff) |
ARM: imx: vining2000: Repair PCIe support
Ever since the conversion to DM PCI, the board was missing the PCIe DT
nodes, hence the PCI did not really work. Fill in the DT nodes and add
missing PCIe device reset.
Moreover, bring the PCIe power domain up before booting Linux. This is
mandatory to keep old broken vendor kernels working, as they do not do
so and depend on the bootloader to bring the power domain up.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
-rw-r--r-- | arch/arm/dts/imx6sx-softing-vining-2000.dts | 17 | ||||
-rw-r--r-- | board/softing/vining_2000/vining_2000.c | 28 |
2 files changed, 45 insertions, 0 deletions
diff --git a/arch/arm/dts/imx6sx-softing-vining-2000.dts b/arch/arm/dts/imx6sx-softing-vining-2000.dts index 371890ff608..78dd5755a37 100644 --- a/arch/arm/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/dts/imx6sx-softing-vining-2000.dts @@ -270,6 +270,17 @@ status = "okay"; }; +®_pcie { + regulator-always-on; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpios>; @@ -360,6 +371,12 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6SX_PAD_NAND_DATA02__GPIO4_IO_6 0x10b0 + >; + }; + pinctrl_pwm1: pwm1grp-1 { fsl,pins = < /* blue LED */ diff --git a/board/softing/vining_2000/vining_2000.c b/board/softing/vining_2000/vining_2000.c index b6f1415bb5a..fe47c365a12 100644 --- a/board/softing/vining_2000/vining_2000.c +++ b/board/softing/vining_2000/vining_2000.c @@ -406,6 +406,19 @@ int checkboard(void) return 0; } +#define PCIE_PHY_PUP_REQ BIT(7) + +void board_preboot_os(void) +{ + struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; + struct gpc *gpc_regs = (struct gpc *)GPC_BASE_ADDR; + + /* Bring the PCI power domain up, so that old vendorkernel works. */ + setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN); + setbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST); + setbits_le32(&gpc_regs->cntr, PCIE_PHY_PUP_REQ); +} + #ifdef CONFIG_SPL_BUILD #include <linux/libfdt.h> #include <spl.h> @@ -413,6 +426,10 @@ int checkboard(void) static struct fsl_esdhc_cfg usdhc_cfg = { USDHC4_BASE_ADDR }; +static iomux_v3_cfg_t const pcie_pads[] = { + MX6_PAD_NAND_DATA02__GPIO4_IO_6 | MUX_PAD_CTRL(GPIO_PAD_CTRL), +}; + static iomux_v3_cfg_t const uart_pads[] = { MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), @@ -431,6 +448,11 @@ static iomux_v3_cfg_t const usdhc4_pads[] = { MX6_PAD_SD4_DATA7__USDHC4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; +static void vining2000_spl_setup_iomux_pcie(void) +{ + imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads)); +} + static void vining2000_spl_setup_iomux_uart(void) { imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); @@ -574,11 +596,17 @@ void board_init_f(ulong dummy) ccgr_init(); /* iomux setup */ + vining2000_spl_setup_iomux_pcie(); vining2000_spl_setup_iomux_uart(); /* setup GP timer */ timer_init(); + /* reset the PCIe device */ + gpio_set_value(IMX_GPIO_NR(4, 6), 1); + udelay(50); + gpio_set_value(IMX_GPIO_NR(4, 6), 0); + /* UART clocks enabled and gd valid - init serial console */ preloader_console_init(); |