dts: add device tree for STM32MP157C-ED1 board

Add minimal devicetree for STM32MP157C-ED1 board,
with only the devices to allow boot from SDCARD:
- RCC for clock and reset
- UART4 for console
- I2C and PMIC
- DDR
- SDMMC0 for SDCard

Waiting Kernel upstream for alignment.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>

9 files changed, 1357 insertions, 0 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 83e13ec915..7dd1dffae5 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -500,6 +500,9 @@ dtb-$(CONFIG_ARCH_ASPEED) += ast2500-evb.dtb
 
 dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
 
+dtb-$(CONFIG_TARGET_STM32MP1) += \
+	stm32mp157c-ed1.dtb
+
 targets += $(dtb-y)
 
 # Add any required device tree compiler flags here
diff --git a/arch/arm/dts/stm32mp15-ddr.dtsi b/arch/arm/dts/stm32mp15-ddr.dtsi
new file mode 100644
index 0000000000..ddfa0794d9
--- /dev/null
+++ b/arch/arm/dts/stm32mp15-ddr.dtsi
@@ -0,0 +1,155 @@
+/*
+ * Copyright : STMicroelectronics 2018
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
+ */
+
+/ {
+	soc {
+		ddr: ddr@0x5A003000{
+			u-boot,dm-pre-reloc;
+
+			compatible = "st,stm32mp1-ddr";
+
+			reg = <0x5A003000 0x550
+			       0x5A004000 0x234>;
+
+			clocks = <&rcc_clk AXIDCG>,
+				 <&rcc_clk DDRC1>,
+				 <&rcc_clk DDRC2>,
+				 <&rcc_clk DDRPHYC>,
+				 <&rcc_clk DDRCAPB>,
+				 <&rcc_clk DDRPHYCAPB>;
+
+			clock-names = "axidcg",
+				      "ddrc1",
+				      "ddrc2",
+				      "ddrphyc",
+				      "ddrcapb",
+				      "ddrphycapb";
+
+			st,mem-name = DDR_MEM_NAME;
+			st,mem-speed = <DDR_MEM_SPEED>;
+			st,mem-size = <DDR_MEM_SIZE>;
+
+			st,ctl-reg = <
+				DDR_MSTR
+				DDR_MRCTRL0
+				DDR_MRCTRL1
+				DDR_DERATEEN
+				DDR_DERATEINT
+				DDR_PWRCTL
+				DDR_PWRTMG
+				DDR_HWLPCTL
+				DDR_RFSHCTL0
+				DDR_RFSHCTL3
+				DDR_CRCPARCTL0
+				DDR_ZQCTL0
+				DDR_DFITMG0
+				DDR_DFITMG1
+				DDR_DFILPCFG0
+				DDR_DFIUPD0
+				DDR_DFIUPD1
+				DDR_DFIUPD2
+				DDR_DFIPHYMSTR
+				DDR_ODTMAP
+				DDR_DBG0
+				DDR_DBG1
+				DDR_DBGCMD
+				DDR_POISONCFG
+				DDR_PCCFG
+			>;
+
+			st,ctl-timing = <
+				DDR_RFSHTMG
+				DDR_DRAMTMG0
+				DDR_DRAMTMG1
+				DDR_DRAMTMG2
+				DDR_DRAMTMG3
+				DDR_DRAMTMG4
+				DDR_DRAMTMG5
+				DDR_DRAMTMG6
+				DDR_DRAMTMG7
+				DDR_DRAMTMG8
+				DDR_DRAMTMG14
+				DDR_ODTCFG
+			>;
+
+			st,ctl-map = <
+				DDR_ADDRMAP1
+				DDR_ADDRMAP2
+				DDR_ADDRMAP3
+				DDR_ADDRMAP4
+				DDR_ADDRMAP5
+				DDR_ADDRMAP6
+				DDR_ADDRMAP9
+				DDR_ADDRMAP10
+				DDR_ADDRMAP11
+			>;
+
+			st,ctl-perf = <
+				DDR_SCHED
+				DDR_SCHED1
+				DDR_PERFHPR1
+				DDR_PERFLPR1
+				DDR_PERFWR1
+				DDR_PCFGR_0
+				DDR_PCFGW_0
+				DDR_PCFGQOS0_0
+				DDR_PCFGQOS1_0
+				DDR_PCFGWQOS0_0
+				DDR_PCFGWQOS1_0
+				DDR_PCFGR_1
+				DDR_PCFGW_1
+				DDR_PCFGQOS0_1
+				DDR_PCFGQOS1_1
+				DDR_PCFGWQOS0_1
+				DDR_PCFGWQOS1_1
+			>;
+
+			st,phy-reg = <
+				DDR_PGCR
+				DDR_ACIOCR
+				DDR_DXCCR
+				DDR_DSGCR
+				DDR_DCR
+				DDR_ODTCR
+				DDR_ZQ0CR1
+				DDR_DX0GCR
+				DDR_DX1GCR
+				DDR_DX2GCR
+				DDR_DX3GCR
+			>;
+
+			st,phy-timing = <
+				DDR_PTR0
+				DDR_PTR1
+				DDR_PTR2
+				DDR_DTPR0
+				DDR_DTPR1
+				DDR_DTPR2
+				DDR_MR0
+				DDR_MR1
+				DDR_MR2
+				DDR_MR3
+			>;
+
+			st,phy-cal = <
+				DDR_DX0DLLCR
+				DDR_DX0DQTR
+				DDR_DX0DQSTR
+				DDR_DX1DLLCR
+				DDR_DX1DQTR
+				DDR_DX1DQSTR
+				DDR_DX2DLLCR
+				DDR_DX2DQTR
+				DDR_DX2DQSTR
+				DDR_DX3DLLCR
+				DDR_DX3DQTR
+				DDR_DX3DQSTR
+			>;
+
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
new file mode 100644
index 0000000000..352e470fa9
--- /dev/null
+++ b/arch/arm/dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
+ */
+
+/* STM32MP157C ED1 and ED2 BOARD configuration
+ * 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
+ * Reference used NT5CC256M16DP-DI from NANYA
+ *
+ * DDR type / Platform	DDR3/3L
+ * freq		533MHz
+ * width	32
+ * datasheet	0  = MT41J256M16-187 / DDR3-1066 bin G
+ * DDR density	8
+ * timing mode	optimized
+ * Scheduling/QoS options : type = 2
+ * address mapping : RBC
+ */
+
+#define DDR_MEM_NAME "DDR3-1066 bin G 2x4Gb 533MHz v1.36"
+#define DDR_MEM_SPEED 533
+#define DDR_MEM_SIZE 0x40000000
+
+#define DDR_MSTR 0x00040401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0081008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B2414
+#define DDR_DRAMTMG1 0x000A041C
+#define DDR_DRAMTMG2 0x0608090F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x08040608
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02060105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F070707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00001201
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100B03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100B03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100B03
+#define DDR_PCFGQOS1_1 0x00800100
+#define DDR_PCFGWQOS0_1 0x01100B03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200001F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x38D488D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000840
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000208
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x0000005B
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX0DLLCR 0x40000000
+#define DDR_DX0DQTR 0xFFFFFFFF
+#define DDR_DX0DQSTR 0x3DB02000
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX1DLLCR 0x40000000
+#define DDR_DX1DQTR 0xFFFFFFFF
+#define DDR_DX1DQSTR 0x3DB02000
+#define DDR_DX2GCR 0x0000CE81
+#define DDR_DX2DLLCR 0x40000000
+#define DDR_DX2DQTR 0xFFFFFFFF
+#define DDR_DX2DQSTR 0x3DB02000
+#define DDR_DX3GCR 0x0000CE81
+#define DDR_DX3DLLCR 0x40000000
+#define DDR_DX3DQTR 0xFFFFFFFF
+#define DDR_DX3DQSTR 0x3DB02000
+
+#include "stm32mp15-ddr.dtsi"
diff --git a/arch/arm/dts/stm32mp157-u-boot.dtsi b/arch/arm/dts/stm32mp157-u-boot.dtsi
new file mode 100644
index 0000000000..d374b2bc08
--- /dev/null
+++ b/arch/arm/dts/stm32mp157-u-boot.dtsi
@@ -0,0 +1,134 @@
+/*
+ * Copyright : STMicroelectronics 2018
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
+ */
+
+/ {
+	aliases {
+		gpio0 = &gpioa;
+		gpio1 = &gpiob;
+		gpio2 = &gpioc;
+		gpio3 = &gpiod;
+		gpio4 = &gpioe;
+		gpio5 = &gpiof;
+		gpio6 = &gpiog;
+		gpio7 = &gpioh;
+		gpio8 = &gpioi;
+		gpio9 = &gpioj;
+		gpio10 = &gpiok;
+		gpio25 = &gpioz;
+	};
+
+	config {
+		u-boot,dm-pre-reloc;
+	};
+
+	clocks {
+		u-boot,dm-pre-reloc;
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&clk_hsi {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_hse {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_lse {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_lsi {
+	u-boot,dm-pre-reloc;
+};
+
+&clk_csi {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc_clk {
+	u-boot,dm-pre-reloc;
+};
+
+&rcc_rst {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_z {
+	u-boot,dm-pre-reloc;
+};
+
+&gpioa {
+	compatible = "st,stm32-gpio";
+	u-boot,dm-pre-reloc;
+};
+
+&gpiob {
+	compatible = "st,stm32-gpio";
+	u-boot,dm-pre-reloc;
+};
+
+&gpioc {
+	compatible = "st,stm32-gpio";
+	u-boot,dm-pre-reloc;
+};
+
+&gpiod {
+	compatible = "st,stm32-gpio";
+	u-boot,dm-pre-reloc;
+};
+
+&gpioe {
+	compatible = "st,stm32-gpio";
+	u-boot,dm-pre-reloc;
+};
+
+&gpiof {
+	compatible = "st,stm32-gpio";
+	u-boot,dm-pre-reloc;
+};
+
+&gpiog {
+	compatible = "st,stm32-gpio";
+	u-boot,dm-pre-reloc;
+};
+
+&gpioh {
+	compatible = "st,stm32-gpio";
+	u-boot,dm-pre-reloc;
+};
+
+&gpioi {
+	compatible = "st,stm32-gpio";
+	u-boot,dm-pre-reloc;
+};
+
+&gpioj {
+	compatible = "st,stm32-gpio";
+	u-boot,dm-pre-reloc;
+};
+
+&gpiok {
+	compatible = "st,stm32-gpio";
+	u-boot,dm-pre-reloc;
+};
+
+&gpioz {
+	compatible = "st,stm32-gpio";
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/stm32mp157.dtsi b/arch/arm/dts/stm32mp157.dtsi
new file mode 100644
index 0000000000..32d3984259
--- /dev/null
+++ b/arch/arm/dts/stm32mp157.dtsi
@@ -0,0 +1,303 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset-controller/stm32mp1-resets.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	aliases {
+		serial3 = &uart4;
+	};
+
+	intc: interrupt-controller@a0021000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xa0021000 0x1000>,
+		      <0xa0022000 0x2000>;
+	};
+
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		clk_hsi: clk-hsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <64000000>;
+		};
+
+		clk_lse: clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk_lsi: clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
+
+		clk_csi: clk-csi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <4000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		uart4: serial@40010000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40010000 0x400>;
+			clocks = <&rcc_clk UART4_K>;
+			status = "disabled";
+		};
+
+		rcc: rcc@50000000 {
+			compatible = "syscon", "simple-mfd";
+
+			reg = <0x50000000 0x1000>;
+
+			rcc_clk: rcc-clk@50000000 {
+				#clock-cells = <1>;
+				compatible = "st,stm32mp1-rcc-clk";
+			};
+
+			rcc_rst: rcc-reset@50000000 {
+				#reset-cells = <1>;
+				compatible = "st,stm32mp1-rcc-rst";
+			};
+		};
+
+		pinctrl: pin-controller {
+			compatible = "st,stm32mp157-pinctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50002000 0xa400>;
+			pins-are-numbered;
+
+			gpioa: gpio@50002000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc_clk GPIOA>;
+				st,bank-name = "GPIOA";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 0 16>;
+				status = "disabled";
+			};
+
+			gpiob: gpio@50003000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc_clk GPIOB>;
+				st,bank-name = "GPIOB";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 16 16>;
+				status = "disabled";
+			};
+
+			gpioc: gpio@50004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc_clk GPIOC>;
+				st,bank-name = "GPIOC";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 32 16>;
+				status = "disabled";
+			};
+
+			gpiod: gpio@50005000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x400>;
+				clocks = <&rcc_clk GPIOD>;
+				st,bank-name = "GPIOD";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 48 16>;
+				status = "disabled";
+			};
+
+			gpioe: gpio@50006000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x400>;
+				clocks = <&rcc_clk GPIOE>;
+				st,bank-name = "GPIOE";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 64 16>;
+				status = "disabled";
+			};
+
+			gpiof: gpio@50007000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x400>;
+				clocks = <&rcc_clk GPIOF>;
+				st,bank-name = "GPIOF";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 80 16>;
+				status = "disabled";
+			};
+
+			gpiog: gpio@50008000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x400>;
+				clocks = <&rcc_clk GPIOG>;
+				st,bank-name = "GPIOG";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 96 16>;
+				status = "disabled";
+			};
+
+			gpioh: gpio@50009000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x400>;
+				clocks = <&rcc_clk GPIOH>;
+				st,bank-name = "GPIOH";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 112 16>;
+				status = "disabled";
+			};
+
+			gpioi: gpio@5000a000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x400>;
+				clocks = <&rcc_clk GPIOI>;
+				st,bank-name = "GPIOI";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 128 16>;
+				status = "disabled";
+			};
+
+			gpioj: gpio@5000b000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x400>;
+				clocks = <&rcc_clk GPIOJ>;
+				st,bank-name = "GPIOJ";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 144 16>;
+				status = "disabled";
+			};
+
+			gpiok: gpio@5000c000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa000 0x400>;
+				clocks = <&rcc_clk GPIOK>;
+				st,bank-name = "GPIOK";
+				ngpios = <8>;
+				gpio-ranges = <&pinctrl 0 160 8>;
+				status = "disabled";
+			};
+		};
+
+		pinctrl_z: pin-controller-z {
+			compatible = "st,stm32mp157-z-pinctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x54004000 0x400>;
+			pins-are-numbered;
+
+			gpioz: gpio@54004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&rcc_clk GPIOZ>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				ngpios = <8>;
+				gpio-ranges = <&pinctrl_z 0 400 8>;
+				status = "disabled";
+			};
+		};
+
+		sdmmc1: sdmmc@58005000 {
+			compatible = "st,stm32-sdmmc2";
+			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+			reg-names = "sdmmc", "delay";
+			clocks = <&rcc_clk SDMMC1_K>;
+			resets = <&rcc_rst SDMMC1_R>;
+			st,idma = <1>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@5c002000 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x5c002000 0x400>;
+			interrupt-names = "event", "error", "wakeup";
+			clocks = <&rcc_clk I2C4_K>;
+			resets = <&rcc_rst I2C4_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			wakeup-source;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
new file mode 100644
index 0000000000..94d27fb398
--- /dev/null
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -0,0 +1,133 @@
+/*
+ * Copyright : STMicroelectronics 2018
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp157-u-boot.dtsi"
+#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc1;
+		i2c3 = &i2c4;
+	};
+};
+
+&uart4_pins_a {
+	u-boot,dm-pre-reloc;
+	pins1 {
+		u-boot,dm-pre-reloc;
+	};
+	pins2 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&i2c4_pins_a {
+	u-boot,dm-pre-reloc;
+	pins {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&uart4 {
+	u-boot,dm-pre-reloc;
+};
+
+&i2c4 {
+	u-boot,dm-pre-reloc;
+};
+
+&pmic {
+	u-boot,dm-pre-reloc;
+};
+
+/* CLOCK init */
+&rcc_clk {
+	st,clksrc = <
+		CLK_MPU_PLL1P
+		CLK_AXI_PLL2P
+		CLK_MCU_PLL3P
+		CLK_PLL12_HSE
+		CLK_PLL3_HSE
+		CLK_PLL4_HSE
+		CLK_RTC_LSE
+		CLK_MCO1_DISABLED
+		CLK_MCO2_DISABLED
+	>;
+
+	st,clkdiv = <
+		1 /*MPU*/
+		0 /*AXI*/
+		0 /*MCU*/
+		1 /*APB1*/
+		1 /*APB2*/
+		1 /*APB3*/
+		1 /*APB4*/
+		2 /*APB5*/
+		23 /*RTC*/
+		0 /*MCO1*/
+		0 /*MCO2*/
+	>;
+
+	st,pkcs = <
+		CLK_CKPER_DISABLED
+		CLK_SDMMC12_PLL3R
+		CLK_I2C46_PCLK5
+		CLK_I2C12_PCLK1
+		CLK_I2C35_PCLK1
+		CLK_UART1_PCLK5
+		CLK_UART24_PCLK1
+		CLK_UART35_PCLK1
+		CLK_UART6_PCLK2
+		CLK_UART78_PCLK1
+	>;
+
+	/* VCO = 1300.0 MHz => P = 650 (CPU) */
+	pll1: st,pll@0 {
+		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
+		frac = < 0x800 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+	pll2: st,pll@1 {
+		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+		frac = < 0x1400 >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 774.0 MHz => P = 194, Q = 37, R = 97 */
+	pll3: st,pll@2 {
+		cfg = < 3 128 3 20 7 PQR(1,1,1) >;
+		u-boot,dm-pre-reloc;
+	};
+
+	/* VCO = 508.0 MHz => P = 56, Q = 56, R = 56 */
+	pll4: st,pll@3 {
+		cfg = < 5 126 8 8 8 PQR(1,1,1) >;
+		u-boot,dm-pre-reloc;
+	};
+};
+
+/* SPL part **************************************/
+/* MMC1 boot */
+&sdmmc1_b4_pins_a {
+	u-boot,dm-spl;
+	pins {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc1_dir_pins_a {
+	u-boot,dm-spl;
+	pins {
+		u-boot,dm-spl;
+	};
+};
+
+&sdmmc1 {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
new file mode 100644
index 0000000000..4b20fabb71
--- /dev/null
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -0,0 +1,167 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+/ {
+	model = "STMicroelectronics STM32MP157C pmic eval daughter";
+	compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory {
+		reg = <0xC0000000 0x40000000>;
+	};
+};
+
+&gpioa {
+	status = "okay";
+};
+
+&gpiob {
+	status = "okay";
+};
+
+&gpioc {
+	status = "okay";
+};
+
+&gpiod {
+	status = "okay";
+};
+
+&gpioe {
+	status = "okay";
+};
+
+&gpiof {
+	status = "okay";
+};
+
+&gpiog {
+	status = "okay";
+};
+
+&gpioh {
+	status = "okay";
+};
+
+&gpioi {
+	status = "okay";
+};
+
+&gpioj {
+	status = "okay";
+};
+
+&gpiok {
+	status = "okay";
+};
+
+&gpioz {
+	status = "okay";
+};
+
+&pinctrl {
+	uart4_pins_a: uart4@0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_pins_a: sdmmc1-b4@0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_dir_pins_a: sdmmc1-dir@0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF11)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+};
+
+&pinctrl_z {
+	i2c4_pins_a: i2c4@0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+				 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	pmic: stpmu1@33 {
+		compatible = "st,stpmu1";
+		reg = <0x33>;
+		interrupts = <0 2>;
+		interrupt-parent = <&gpioa>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	broken-cd;
+	st,dirpol;
+	st,negedge;
+	st,pin-ckin;
+	bus-width = <4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
diff --git a/include/dt-bindings/clock/stm32mp1-clks.h b/include/dt-bindings/clock/stm32mp1-clks.h
new file mode 100644
index 0000000000..16431581b9
--- /dev/null
+++ b/include/dt-bindings/clock/stm32mp1-clks.h
@@ -0,0 +1,243 @@
+/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Gabriel Fernandez <gabriel.fernandez@st.com> for STMicroelectronics.
+ */
+/* OSCILLATOR clocks */
+#define CK_HSE 0
+#define CK_CSI 1
+#define CK_LSI 2
+#define CK_LSE 3
+#define CK_HSI 4
+#define CK_HSE_DIV2 5
+
+/* Bus clocks */
+#define TIM2 6
+#define TIM3 7
+#define TIM4 8
+#define TIM5 9
+#define TIM6 10
+#define TIM7 11
+#define TIM12 12
+#define TIM13 13
+#define TIM14 14
+#define LPTIM1 15
+#define SPI2 16
+#define SPI3 17
+#define USART2 18
+#define USART3 19
+#define UART4 20
+#define UART5 21
+#define UART7 22
+#define UART8 23
+#define I2C1 24
+#define I2C2 25
+#define I2C3 26
+#define I2C5 27
+#define SPDIF 28
+#define CEC 29
+#define DAC12 30
+#define MDIO 31
+#define TIM1 32
+#define TIM8 33
+#define TIM15 34
+#define TIM16 35
+#define TIM17 36
+#define SPI1 37
+#define SPI4 38
+#define SPI5 39
+#define USART6 40
+#define SAI1 41
+#define SAI2 42
+#define SAI3 43
+#define DFSDM 44
+#define FDCAN 45
+#define LPTIM2 46
+#define LPTIM3 47
+#define LPTIM4 48
+#define LPTIM5 49
+#define SAI4 50
+#define SYSCFG 51
+#define VREF 52
+#define TMPSENS 53
+#define PMBCTRL 54
+#define HDP 55
+#define LTDC 56
+#define DSI 57
+#define IWDG2 58
+#define USBPHY 59
+#define STGENRO 60
+#define SPI6 61
+#define I2C4 62
+#define I2C6 63
+#define USART1 64
+#define RTCAPB 65
+#define TZC 66
+#define TZPC 67
+#define IWDG1 68
+#define BSEC 69
+#define STGEN 70
+#define DMA1 71
+#define DMA2 72
+#define DMAMUX 73
+#define ADC12 74
+#define USBO 75
+#define SDMMC3 76
+#define DCMI 77
+#define CRYP2 78
+#define HASH2 79
+#define RNG2 80
+#define CRC2 81
+#define HSEM 82
+#define IPCC 83
+#define GPIOA 84
+#define GPIOB 85
+#define GPIOC 86
+#define GPIOD 87
+#define GPIOE 88
+#define GPIOF 89
+#define GPIOG 90
+#define GPIOH 91
+#define GPIOI 92
+#define GPIOJ 93
+#define GPIOK 94
+#define GPIOZ 95
+#define CRYP1 96
+#define HASH1 97
+#define RNG1 98
+#define BKPSRAM 99
+#define MDMA 100
+#define DMA2D 101
+#define GPU 102
+#define ETHCK 103
+#define ETHTX 104
+#define ETHRX 105
+#define ETHMAC 106
+#define FMC 107
+#define QSPI 108
+#define SDMMC1 109
+#define SDMMC2 110
+#define CRC1 111
+#define USBH 112
+#define ETHSTP 113
+
+/* Kernel clocks */
+#define SDMMC1_K 114
+#define SDMMC2_K 115
+#define SDMMC3_K 116
+#define FMC_K 117
+#define QSPI_K 118
+#define ETHMAC_K 119
+#define RNG1_K 120
+#define RNG2_K 121
+#define GPU_K 122
+#define USBPHY_K 123
+#define STGEN_K 124
+#define SPDIF_K 125
+#define SPI1_K 126
+#define SPI2_K 127
+#define SPI3_K 128
+#define SPI4_K 129
+#define SPI5_K 130
+#define SPI6_K 131
+#define CEC_K 132
+#define I2C1_K 133
+#define I2C2_K 134
+#define I2C3_K 135
+#define I2C4_K 136
+#define I2C5_K 137
+#define I2C6_K 138
+#define LPTIM1_K 139
+#define LPTIM2_K 140
+#define LPTIM3_K 141
+#define LPTIM4_K 142
+#define LPTIM5_K 143
+#define USART1_K 144
+#define USART2_K 145
+#define USART3_K 146
+#define UART4_K 147
+#define UART5_K 148
+#define USART6_K 149
+#define UART7_K 150
+#define UART8_K 151
+#define DFSDM_K 152
+#define FDCAN_K 153
+#define SAI1_K 154
+#define SAI2_K 155
+#define SAI3_K 156
+#define SAI4_K 157
+#define ADC12_K 158
+#define DSI_K 159
+#define ADFSDM_K 160
+#define USBO_K 161
+#define LTDC_K 162
+
+/* PLL */
+#define PLL1 163
+#define PLL2 164
+#define PLL3 165
+#define PLL4 166
+
+/* ODF */
+#define PLL1_P 167
+#define PLL1_Q 168
+#define PLL1_R 169
+#define PLL2_P 170
+#define PLL2_Q 171
+#define PLL2_R 172
+#define PLL3_P 173
+#define PLL3_Q 174
+#define PLL3_R 175
+#define PLL4_P 176
+#define PLL4_Q 177
+#define PLL4_R 178
+
+/* AUX */
+#define RTC 179
+
+/* MCLK */
+#define CK_PER 180
+#define CK_MPU 181
+#define CK_AXI 182
+#define CK_MCU 183
+
+/* Time base */
+#define TIM2_K 184
+#define TIM3_K 185
+#define TIM4_K 186
+#define TIM5_K 187
+#define TIM6_K 188
+#define TIM7_K 189
+#define TIM12_K 190
+#define TIM13_K 191
+#define TIM14_K 192
+#define TIM1_K 193
+#define TIM8_K 194
+#define TIM15_K 195
+#define TIM16_K 196
+#define TIM17_K 197
+
+/* MCO clocks */
+#define CK_MCO1 198
+#define CK_MCO2 199
+
+/* TRACE & DEBUG clocks */
+#define DBG 200
+#define CK_DBG 201
+#define CK_TRACE 202
+
+/* DDR */
+#define DDRC1 203
+#define DDRC1LP 204
+#define DDRC2 205
+#define DDRC2LP 206
+#define DDRPHYC 207
+#define DDRPHYCLP 208
+#define DDRCAPB 209
+#define DDRCAPBLP 210
+#define AXIDCG 211
+#define DDRPHYCAPB 212
+#define DDRPHYCAPBLP 213
+#define DDRPERFM 214
+
+#define STM32MP1_LAST_CLK 215
diff --git a/include/dt-bindings/reset-controller/stm32mp1-resets.h b/include/dt-bindings/reset-controller/stm32mp1-resets.h
new file mode 100644
index 0000000000..f279f8f51d
--- /dev/null
+++ b/include/dt-bindings/reset-controller/stm32mp1-resets.h
@@ -0,0 +1,97 @@
+#define	LTDC_R		3072
+#define	DSI_R		3076
+#define DDRPERFM_R	3080
+#define	USBPHY_R	3088
+#define	SPI6_R		3136
+#define	I2C4_R		3138
+#define	I2C6_R		3139
+#define	USART1_R	3140
+#define	STGEN_R		3156
+#define	GPIOZ_R		3200
+#define	CRYP1_R		3204
+#define	HASH1_R		3205
+#define	RNG1_R		3206
+#define AXIM_R		3216
+#define	GPU_R		3269
+#define	ETHMAC_R	3274
+#define	FMC_R		3276
+#define	QSPI_R		3278
+#define	SDMMC1_R	3280
+#define	SDMMC2_R	3281
+#define	CRC1_R		3284
+#define	USBH_R		3288
+#define	MDMA_R		3328
+#define MCU_R		8225
+#define	TIM2_R		19456
+#define	TIM3_R		19457
+#define	TIM4_R		19458
+#define	TIM5_R		19459
+#define	TIM6_R		19460
+#define	TIM7_R		19461
+#define	TIM12_R		16462
+#define	TIM13_R		16463
+#define	TIM14_R		16464
+#define	LPTIM1_R	19465
+#define	SPI2_R		19467
+#define	SPI3_R		19468
+#define	USART2_R	19470
+#define	USART3_R	19471
+#define	UART4_R		19472
+#define	UART5_R		19473
+#define	UART7_R		19474
+#define	UART8_R		19475
+#define	I2C1_R		19477
+#define	I2C2_R		19478
+#define	I2C3_R		19479
+#define	I2C5_R		19480
+#define	SPDIF_R		19482
+#define	CEC_R		19483
+#define	DAC12_R		19485
+#define	MDIO_R		19847
+#define	TIM1_R		19520
+#define	TIM8_R		19521
+#define	TIM15_R		19522
+#define	TIM16_R		19523
+#define	TIM17_R		19524
+#define	SPI1_R		19528
+#define	SPI4_R		19529
+#define	SPI5_R		19530
+#define	USART6_R	19533
+#define	SAI1_R		19536
+#define	SAI2_R		19537
+#define	SAI3_R		19538
+#define	DFSDM_R		19540
+#define	FDCAN_R		19544
+#define	LPTIM2_R	19584
+#define	LPTIM3_R	19585
+#define	LPTIM4_R	19586
+#define	LPTIM5_R	19587
+#define	SAI4_R		19592
+#define	SYSCFG_R	19595
+#define	VREF_R		19597
+#define	TMPSENS_R	19600
+#define	PMBCTRL_R	19601
+#define	DMA1_R		19648
+#define	DMA2_R		19649
+#define	DMAMUX_R	19650
+#define	ADC12_R		19653
+#define	USBO_R		19656
+#define	SDMMC3_R	19664
+#define	CAMITF_R	19712
+#define	CRYP2_R		19716
+#define	HASH2_R		19717
+#define	RNG2_R		19718
+#define	CRC2_R		19719
+#define	HSEM_R		19723
+#define	MBOX_R		19724
+#define	GPIOA_R		19776
+#define	GPIOB_R		19777
+#define	GPIOC_R		19778
+#define	GPIOD_R		19779
+#define	GPIOE_R		19780
+#define	GPIOF_R		19781
+#define	GPIOG_R		19782
+#define	GPIOH_R		19783
+#define	GPIOI_R		19784
+#define	GPIOJ_R		19785
+#define	GPIOK_R		19786