Merge git://git.denx.de/u-boot-sunxi

14 files changed, 748 insertions, 171 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 6fe93a83745..3426a983cb2 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -349,25 +349,28 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
 	sun8i-a83t-cubietruck-plus.dtb \
 	sun8i-a83t-tbs-a711.dts
 dtb-$(CONFIG_MACH_SUN8I_H3) += \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
 	sun8i-h2-plus-orangepi-zero.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
 	sun8i-h3-libretech-all-h3-cc.dtb \
+	sun8i-h3-nanopi-m1.dtb \
+	sun8i-h3-nanopi-m1-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb \
 	sun8i-h3-orangepi-2.dtb \
 	sun8i-h3-orangepi-lite.dtb \
 	sun8i-h3-orangepi-one.dtb \
 	sun8i-h3-orangepi-pc.dtb \
 	sun8i-h3-orangepi-pc-plus.dtb \
 	sun8i-h3-orangepi-plus.dtb \
-	sun8i-h3-orangepi-plus2e.dtb \
-	sun8i-h3-nanopi-m1.dtb \
-	sun8i-h3-nanopi-m1-plus.dtb \
-	sun8i-h3-nanopi-neo.dtb \
-	sun8i-h3-nanopi-neo-air.dtb
+	sun8i-h3-orangepi-plus2e.dtb
 dtb-$(CONFIG_MACH_SUN8I_R40) += \
-	sun8i-r40-bananapi-m2-ultra.dtb
+	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-v40-bananapi-m2-berry.dtb
 dtb-$(CONFIG_MACH_SUN8I_V3S) += \
 	sun8i-v3s-licheepi-zero.dtb
 dtb-$(CONFIG_MACH_SUN50I_H5) += \
+	sun50i-h5-libretech-all-h3-cc.dtb \
 	sun50i-h5-nanopi-neo2.dtb \
 	sun50i-h5-nanopi-neo-plus2.dtb \
 	sun50i-h5-orangepi-pc2.dtb \
diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
new file mode 100644
index 00000000000..a7e53c5c26b
--- /dev/null
+++ b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H5";
+	compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
new file mode 100644
index 00000000000..4db0d4bb65e
--- /dev/null
+++ b/arch/arm/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H2+";
+	compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus";
+};
diff --git a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts
index 1fcb16c7eb9..50f2fb30d2d 100644
--- a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts
@@ -5,170 +5,9 @@
 
 /dts-v1/;
 #include "sun8i-h3.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sunxi-libretech-all-h3-cc.dtsi"
 
 / {
 	model = "Libre Computer Board ALL-H3-CC H3";
 	compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
-
-	aliases {
-		ethernet0 = &emac;
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pwr_led {
-			label = "librecomputer:green:pwr";
-			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
-			default-state = "on";
-		};
-
-		status_led {
-			label = "librecomputer:blue:status";
-			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "power";
-			linux,code = <KEY_POWER>;
-			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-		};
-	};
-
-	reg_vcc1v2: vcc1v2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v2";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_vcc5v0>;
-		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
-		enable-active-high;
-	};
-
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&reg_vcc5v0>;
-	};
-
-	/* This represents the board's 5V input */
-	reg_vcc5v0: vcc5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_vcc_dram: vcc-dram {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc-dram";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_vcc5v0>;
-		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
-		enable-active-high;
-	};
-
-	reg_vcc_io: vcc-io {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc-io";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_vcc3v3>;
-		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
-	};
-
-	reg_vdd_cpux: vdd-cpux {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-cpux";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_vcc5v0>;
-		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
-		enable-active-high;
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&ehci2 {
-	status = "okay";
-};
-
-&ehci3 {
-	status = "okay";
-};
-
-&emac {
-	phy-handle = <&int_mii_phy>;
-	phy-mode = "mii";
-	allwinner,leds-active-low;
-	status = "okay";
-};
-
-&ir {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ir_pins_a>;
-	status = "okay";
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
-	vmmc-supply = <&reg_vcc_io>;
-	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-	cd-inverted;
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&ohci2 {
-	status = "okay";
-};
-
-&ohci3 {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
-&usbphy {
-	/* VBUS on USB ports are always on */
-	usb0_vbus-supply = <&reg_vcc5v0>;
-	usb1_vbus-supply = <&reg_vcc5v0>;
-	usb2_vbus-supply = <&reg_vcc5v0>;
-	usb3_vbus-supply = <&reg_vcc5v0>;
-	status = "okay";
 };
diff --git a/arch/arm/dts/sun8i-r40.dtsi b/arch/arm/dts/sun8i-r40.dtsi
index 48ec2e855a2..0aa76a2f10a 100644
--- a/arch/arm/dts/sun8i-r40.dtsi
+++ b/arch/arm/dts/sun8i-r40.dtsi
@@ -43,6 +43,8 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
 
 / {
 	#address-cells = <1>;
@@ -114,6 +116,39 @@
 		#size-cells = <1>;
 		ranges;
 
+		nmi_intc: interrupt-controller@1c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc0_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-r40-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@1c20800 {
 			compatible = "allwinner,sun8i-r40-pinctrl";
 			reg = <0x01c20800 0x400>;
@@ -132,6 +167,14 @@
 				bias-pull-up;
 			};
 
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
 			uart0_pb_pins: uart0_pb_pins {
 				pins = "PB22", "PB23";
 				function = "uart0";
diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
new file mode 100644
index 00000000000..193d9b29ecd
--- /dev/null
+++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi M2 Berry";
+	compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi
new file mode 100644
index 00000000000..5d01bba180e
--- /dev/null
+++ b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "librecomputer:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		};
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>;
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	/* VBUS on USB ports are always on */
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	usb3_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 6dd48c02651..1bb2fa8f518 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -126,6 +126,11 @@ M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
 F:	configs/bananapi_m1_plus_defconfig
 
+BANANAPI M2 BERRY
+M:	Jagan Teki <jagan@amarulasolutions.com>
+S:	Maintained
+F:	configs/bananapi_m2_berry_defconfig
+
 BANANAPI M2 ULTRA BOARD
 M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained
@@ -266,10 +271,12 @@ M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
 S:	Maintained
 F:	configs/MSI_Primo81_defconfig
 
-LIBRETECH ALL-H3-CC H3 BOARD
+LIBRETECH ALL-H3-CC BOARDS
 M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained
+F:	configs/libretech_all_h3_cc_h2_plus_defconfig
 F:	configs/libretech_all_h3_cc_h3_defconfig
+F:	configs/libretech_all_h3_cc_h5_defconfig
 
 NANOPI-M1 BOARD
 M:	Mylène Josserand <mylene.josserand@free-electrons.com>
diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig
new file mode 100644
index 00000000000..9d75108d048
--- /dev/null
+++ b/configs/bananapi_m2_berry_defconfig
@@ -0,0 +1,14 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN8I_R40=y
+CONFIG_DRAM_CLK=576
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MMC0_CD_PIN="PH13"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-v40-bananapi-m2-berry"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_AXP_DLDO4_VOLT=2500
+CONFIG_AXP_ELDO3_VOLT=1200
diff --git a/configs/libretech_all_h3_cc_h2_plus_defconfig b/configs/libretech_all_h3_cc_h2_plus_defconfig
new file mode 100644
index 00000000000..0cbcd48aadb
--- /dev/null
+++ b/configs/libretech_all_h3_cc_h2_plus_defconfig
@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN8I_H3=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-libretech-all-h3-cc"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/libretech_all_h3_cc_h3_defconfig b/configs/libretech_all_h3_cc_h3_defconfig
index 6072680e471..185facdf3ea 100644
--- a/configs/libretech_all_h3_cc_h3_defconfig
+++ b/configs/libretech_all_h3_cc_h3_defconfig
@@ -5,10 +5,8 @@ CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=672
 CONFIG_DRAM_ZQ=3881979
 CONFIG_DRAM_ODT_EN=y
-CONFIG_R_I2C_ENABLE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-libretech-all-h3-cc"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
diff --git a/configs/libretech_all_h3_cc_h5_defconfig b/configs/libretech_all_h3_cc_h5_defconfig
new file mode 100644
index 00000000000..061bddc8fd5
--- /dev/null
+++ b/configs/libretech_all_h3_cc_h5_defconfig
@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H5=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h3-cc"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/include/dt-bindings/clock/sun8i-r40-ccu.h b/include/dt-bindings/clock/sun8i-r40-ccu.h
new file mode 100644
index 00000000000..4fa5f69fc29
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-r40-ccu.h
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_R40_H_
+#define _DT_BINDINGS_CLK_SUN8I_R40_H_
+
+#define CLK_CPU			24
+
+#define CLK_BUS_MIPI_DSI	29
+#define CLK_BUS_CE		30
+#define CLK_BUS_DMA		31
+#define CLK_BUS_MMC0		32
+#define CLK_BUS_MMC1		33
+#define CLK_BUS_MMC2		34
+#define CLK_BUS_MMC3		35
+#define CLK_BUS_NAND		36
+#define CLK_BUS_DRAM		37
+#define CLK_BUS_EMAC		38
+#define CLK_BUS_TS		39
+#define CLK_BUS_HSTIMER		40
+#define CLK_BUS_SPI0		41
+#define CLK_BUS_SPI1		42
+#define CLK_BUS_SPI2		43
+#define CLK_BUS_SPI3		44
+#define CLK_BUS_SATA		45
+#define CLK_BUS_OTG		46
+#define CLK_BUS_EHCI0		47
+#define CLK_BUS_EHCI1		48
+#define CLK_BUS_EHCI2		49
+#define CLK_BUS_OHCI0		50
+#define CLK_BUS_OHCI1		51
+#define CLK_BUS_OHCI2		52
+#define CLK_BUS_VE		53
+#define CLK_BUS_MP		54
+#define CLK_BUS_DEINTERLACE	55
+#define CLK_BUS_CSI0		56
+#define CLK_BUS_CSI1		57
+#define CLK_BUS_HDMI1		58
+#define CLK_BUS_HDMI0		59
+#define CLK_BUS_DE		60
+#define CLK_BUS_TVE0		61
+#define CLK_BUS_TVE1		62
+#define CLK_BUS_TVE_TOP		63
+#define CLK_BUS_GMAC		64
+#define CLK_BUS_GPU		65
+#define CLK_BUS_TVD0		66
+#define CLK_BUS_TVD1		67
+#define CLK_BUS_TVD2		68
+#define CLK_BUS_TVD3		69
+#define CLK_BUS_TVD_TOP		70
+#define CLK_BUS_TCON_LCD0	71
+#define CLK_BUS_TCON_LCD1	72
+#define CLK_BUS_TCON_TV0	73
+#define CLK_BUS_TCON_TV1	74
+#define CLK_BUS_TCON_TOP	75
+#define CLK_BUS_CODEC		76
+#define CLK_BUS_SPDIF		77
+#define CLK_BUS_AC97		78
+#define CLK_BUS_PIO		79
+#define CLK_BUS_IR0		80
+#define CLK_BUS_IR1		81
+#define CLK_BUS_THS		82
+#define CLK_BUS_KEYPAD		83
+#define CLK_BUS_I2S0		84
+#define CLK_BUS_I2S1		85
+#define CLK_BUS_I2S2		86
+#define CLK_BUS_I2C0		87
+#define CLK_BUS_I2C1		88
+#define CLK_BUS_I2C2		89
+#define CLK_BUS_I2C3		90
+#define CLK_BUS_CAN		91
+#define CLK_BUS_SCR		92
+#define CLK_BUS_PS20		93
+#define CLK_BUS_PS21		94
+#define CLK_BUS_I2C4		95
+#define CLK_BUS_UART0		96
+#define CLK_BUS_UART1		97
+#define CLK_BUS_UART2		98
+#define CLK_BUS_UART3		99
+#define CLK_BUS_UART4		100
+#define CLK_BUS_UART5		101
+#define CLK_BUS_UART6		102
+#define CLK_BUS_UART7		103
+#define CLK_BUS_DBG		104
+
+#define CLK_THS			105
+#define CLK_NAND		106
+#define CLK_MMC0		107
+#define CLK_MMC1		108
+#define CLK_MMC2		109
+#define CLK_MMC3		110
+#define CLK_TS			111
+#define CLK_CE			112
+#define CLK_SPI0		113
+#define CLK_SPI1		114
+#define CLK_SPI2		115
+#define CLK_SPI3		116
+#define CLK_I2S0		117
+#define CLK_I2S1		118
+#define CLK_I2S2		119
+#define CLK_AC97		120
+#define CLK_SPDIF		121
+#define CLK_KEYPAD		122
+#define CLK_SATA		123
+#define CLK_USB_PHY0		124
+#define CLK_USB_PHY1		125
+#define CLK_USB_PHY2		126
+#define CLK_USB_OHCI0		127
+#define CLK_USB_OHCI1		128
+#define CLK_USB_OHCI2		129
+#define CLK_IR0			130
+#define CLK_IR1			131
+
+#define CLK_DRAM_VE		133
+#define CLK_DRAM_CSI0		134
+#define CLK_DRAM_CSI1		135
+#define CLK_DRAM_TS		136
+#define CLK_DRAM_TVD		137
+#define CLK_DRAM_MP		138
+#define CLK_DRAM_DEINTERLACE	139
+#define CLK_DE			140
+#define CLK_MP			141
+#define CLK_TCON_LCD0		142
+#define CLK_TCON_LCD1		143
+#define CLK_TCON_TV0		144
+#define CLK_TCON_TV1		145
+#define CLK_DEINTERLACE		146
+#define CLK_CSI1_MCLK		147
+#define CLK_CSI_SCLK		148
+#define CLK_CSI0_MCLK		149
+#define CLK_VE			150
+#define CLK_CODEC		151
+#define CLK_AVS			152
+#define CLK_HDMI		153
+#define CLK_HDMI_SLOW		154
+
+#define CLK_DSI_DPHY		156
+#define CLK_TVE0		157
+#define CLK_TVE1		158
+#define CLK_TVD0		159
+#define CLK_TVD1		160
+#define CLK_TVD2		161
+#define CLK_TVD3		162
+#define CLK_GPU			163
+#define CLK_OUTA		164
+#define CLK_OUTB		165
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_R40_H_ */
diff --git a/include/dt-bindings/reset/sun8i-r40-ccu.h b/include/dt-bindings/reset/sun8i-r40-ccu.h
new file mode 100644
index 00000000000..c5ebcf6672e
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-r40-ccu.h
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_R40_H_
+#define _DT_BINDINGS_RST_SUN8I_R40_H_
+
+#define RST_USB_PHY0		0
+#define RST_USB_PHY1		1
+#define RST_USB_PHY2		2
+
+#define RST_DRAM		3
+#define RST_MBUS		4
+
+#define RST_BUS_MIPI_DSI	5
+#define RST_BUS_CE		6
+#define RST_BUS_DMA		7
+#define RST_BUS_MMC0		8
+#define RST_BUS_MMC1		9
+#define RST_BUS_MMC2		10
+#define RST_BUS_MMC3		11
+#define RST_BUS_NAND		12
+#define RST_BUS_DRAM		13
+#define RST_BUS_EMAC		14
+#define RST_BUS_TS		15
+#define RST_BUS_HSTIMER		16
+#define RST_BUS_SPI0		17
+#define RST_BUS_SPI1		18
+#define RST_BUS_SPI2		19
+#define RST_BUS_SPI3		20
+#define RST_BUS_SATA		21
+#define RST_BUS_OTG		22
+#define RST_BUS_EHCI0		23
+#define RST_BUS_EHCI1		24
+#define RST_BUS_EHCI2		25
+#define RST_BUS_OHCI0		26
+#define RST_BUS_OHCI1		27
+#define RST_BUS_OHCI2		28
+#define RST_BUS_VE		29
+#define RST_BUS_MP		30
+#define RST_BUS_DEINTERLACE	31
+#define RST_BUS_CSI0		32
+#define RST_BUS_CSI1		33
+#define RST_BUS_HDMI0		34
+#define RST_BUS_HDMI1		35
+#define RST_BUS_DE		36
+#define RST_BUS_TVE0		37
+#define RST_BUS_TVE1		38
+#define RST_BUS_TVE_TOP		39
+#define RST_BUS_GMAC		40
+#define RST_BUS_GPU		41
+#define RST_BUS_TVD0		42
+#define RST_BUS_TVD1		43
+#define RST_BUS_TVD2		44
+#define RST_BUS_TVD3		45
+#define RST_BUS_TVD_TOP		46
+#define RST_BUS_TCON_LCD0	47
+#define RST_BUS_TCON_LCD1	48
+#define RST_BUS_TCON_TV0	49
+#define RST_BUS_TCON_TV1	50
+#define RST_BUS_TCON_TOP	51
+#define RST_BUS_DBG		52
+#define RST_BUS_LVDS		53
+#define RST_BUS_CODEC		54
+#define RST_BUS_SPDIF		55
+#define RST_BUS_AC97		56
+#define RST_BUS_IR0		57
+#define RST_BUS_IR1		58
+#define RST_BUS_THS		59
+#define RST_BUS_KEYPAD		60
+#define RST_BUS_I2S0		61
+#define RST_BUS_I2S1		62
+#define RST_BUS_I2S2		63
+#define RST_BUS_I2C0		64
+#define RST_BUS_I2C1		65
+#define RST_BUS_I2C2		66
+#define RST_BUS_I2C3		67
+#define RST_BUS_CAN		68
+#define RST_BUS_SCR		69
+#define RST_BUS_PS20		70
+#define RST_BUS_PS21		71
+#define RST_BUS_I2C4		72
+#define RST_BUS_UART0		73
+#define RST_BUS_UART1		74
+#define RST_BUS_UART2		75
+#define RST_BUS_UART3		76
+#define RST_BUS_UART4		77
+#define RST_BUS_UART5		78
+#define RST_BUS_UART6		79
+#define RST_BUS_UART7		80
+
+#endif /* _DT_BINDINGS_RST_SUN8I_R40_H_ */