STiH410-B2260: Add device tree

This device tree has been extracted from v4.9 kernel

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

15 files changed, 3967 insertions, 1 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index eb68c204bb5..231ebfa7db8 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -339,6 +339,8 @@ dtb-$(CONFIG_ARCH_BCM283X) += \
 
 dtb-$(CONFIG_ARCH_ASPEED) += ast2500-evb.dtb
 
+dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
+
 targets += $(dtb-y)
 
 # Add any required device tree compiler flags here
diff --git a/arch/arm/dts/st-pincfg.h b/arch/arm/dts/st-pincfg.h
new file mode 100644
index 00000000000..4851c387d52
--- /dev/null
+++ b/arch/arm/dts/st-pincfg.h
@@ -0,0 +1,71 @@
+#ifndef _ST_PINCFG_H_
+#define _ST_PINCFG_H_
+
+/* Alternate functions */
+#define ALT1	1
+#define ALT2	2
+#define ALT3	3
+#define ALT4	4
+#define ALT5	5
+#define ALT6	6
+#define ALT7	7
+
+/* Output enable */
+#define OE			(1 << 27)
+/* Pull Up */
+#define PU			(1 << 26)
+/* Open Drain */
+#define OD			(1 << 25)
+#define RT			(1 << 23)
+#define INVERTCLK		(1 << 22)
+#define CLKNOTDATA		(1 << 21)
+#define DOUBLE_EDGE		(1 << 20)
+#define CLK_A			(0 << 18)
+#define CLK_B			(1 << 18)
+#define CLK_C			(2 << 18)
+#define CLK_D			(3 << 18)
+
+/* User-frendly defines for Pin Direction */
+		/* oe = 0, pu = 0, od = 0 */
+#define IN			(0)
+		/* oe = 0, pu = 1, od = 0 */
+#define IN_PU			(PU)
+		/* oe = 1, pu = 0, od = 0 */
+#define OUT			(OE)
+		/* oe = 1, pu = 0, od = 1 */
+#define BIDIR			(OE | OD)
+		/* oe = 1, pu = 1, od = 1 */
+#define BIDIR_PU		(OE | PU | OD)
+
+/* RETIME_TYPE */
+/*
+ * B Mode
+ * Bypass retime with optional delay parameter
+ */
+#define BYPASS		(0)
+/*
+ * R0, R1, R0D, R1D modes
+ * single-edge data non inverted clock, retime data with clk
+ */
+#define SE_NICLK_IO	(RT)
+/*
+ * RIV0, RIV1, RIV0D, RIV1D modes
+ * single-edge data inverted clock, retime data with clk
+ */
+#define SE_ICLK_IO	(RT | INVERTCLK)
+/*
+ * R0E, R1E, R0ED, R1ED modes
+ * double-edge data, retime data with clk
+ */
+#define DE_IO		(RT | DOUBLE_EDGE)
+/*
+ * CIV0, CIV1 modes with inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define ICLK		(RT | CLKNOTDATA | INVERTCLK)
+/*
+ * CLK0, CLK1 modes with non-inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define NICLK		(RT | CLKNOTDATA)
+#endif /* _ST_PINCFG_H_ */
diff --git a/arch/arm/dts/stih407-clock.dtsi b/arch/arm/dts/stih407-clock.dtsi
new file mode 100644
index 00000000000..13029c03d7c
--- /dev/null
+++ b/arch/arm/dts/stih407-clock.dtsi
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <dt-bindings/clock/stih407-clks.h>
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed 30MHz oscillator inputs to SoC
+		 */
+		clk_sysin: clk-sysin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: clk-m-a9-periphs {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+
+			clocks = <&clk_m_a9>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * A9 PLL.
+		 */
+		clockgen-a9@92b0000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x92b0000 0xffff>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-clkgen-plla9";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks.
+		 */
+		clk_m_a9: clk-m-a9@92b0000 {
+			#clock-cells = <0>;
+			compatible = "st,stih407-clkgen-a9-mux";
+			reg = <0x92b0000 0x10000>;
+
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_s_c0_flexgen 13>,
+				 <&clk_m_a9_ext2f_div2>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+
+			clocks = <&clk_s_c0_flexgen 13>;
+
+			clock-output-names = "clk-m-a9-ext2f-div2";
+
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * Bootloader initialized system infrastructure clock for
+		 * serial devices.
+		 */
+		clk_ext2f_a9: clockgen-c0@13 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			clock-output-names = "clk-s-icn-reg-0";
+		};
+
+		clockgen-a@090ff000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x90ff000 0x1000>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll-ofd-0";
+			};
+
+			clk_s_a0_flexgen: clk-s-a0-flexgen {
+				compatible = "st,flexgen";
+
+				#clock-cells = <1>;
+
+				clocks = <&clk_s_a0_pll 0>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-ic-lmi0";
+			};
+		};
+
+		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs-pll";
+			reg = <0x9103000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-c0-fs0-ch0",
+					     "clk-s-c0-fs0-ch1",
+					     "clk-s-c0-fs0-ch2",
+					     "clk-s-c0-fs0-ch3";
+		};
+
+		clk_s_c0: clockgen-c@09103000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9103000 0x1000>;
+
+			clk_s_c0_pll0: clk-s-c0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll0-odf-0";
+			};
+
+			clk_s_c0_pll1: clk-s-c0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll1";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll1-odf-0";
+			};
+
+			clk_s_c0_flexgen: clk-s-c0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_c0_pll0 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_quadfs 0>,
+					 <&clk_s_c0_quadfs 1>,
+					 <&clk_s_c0_quadfs 2>,
+					 <&clk_s_c0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-icn-gpu",
+						     "clk-fdma",
+						     "clk-nand",
+						     "clk-hva",
+						     "clk-proc-stfe",
+						     "clk-proc-tp",
+						     "clk-rx-icn-dmu",
+						     "clk-rx-icn-hva",
+						     "clk-icn-cpu",
+						     "clk-tx-icn-dmu",
+						     "clk-mmc-0",
+						     "clk-mmc-1",
+						     "clk-jpegdec",
+						     "clk-ext2fa9",
+						     "clk-ic-bdisp-0",
+						     "clk-ic-bdisp-1",
+						     "clk-pp-dmu",
+						     "clk-vid-dmu",
+						     "clk-dss-lpc",
+						     "clk-st231-aud-0",
+						     "clk-st231-gp-1",
+						     "clk-st231-dmu",
+						     "clk-icn-lmi",
+						     "clk-tx-icn-disp-1",
+						     "clk-icn-sbc",
+						     "clk-stfe-frc2",
+						     "clk-eth-phy",
+						     "clk-eth-ref-phyclk",
+						     "clk-flash-promip",
+						     "clk-main-disp",
+						     "clk-aux-disp",
+						     "clk-compo-dvp";
+			};
+		};
+
+		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9104000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d0-fs0-ch0",
+					     "clk-s-d0-fs0-ch1",
+					     "clk-s-d0-fs0-ch2",
+					     "clk-s-d0-fs0-ch3";
+		};
+
+		clockgen-d0@09104000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9104000 0x1000>;
+
+			clk_s_d0_flexgen: clk-s-d0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-audio", "st,flexgen";
+
+				clocks = <&clk_s_d0_quadfs 0>,
+					 <&clk_s_d0_quadfs 1>,
+					 <&clk_s_d0_quadfs 2>,
+					 <&clk_s_d0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-pcm-0",
+						     "clk-pcm-1",
+						     "clk-pcm-2",
+						     "clk-spdiff";
+			};
+		};
+
+		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9106000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d2-fs0-ch0",
+					     "clk-s-d2-fs0-ch1",
+					     "clk-s-d2-fs0-ch2",
+					     "clk-s-d2-fs0-ch3";
+		};
+
+		clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clockgen-d2@x9106000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9106000 0x1000>;
+
+			clk_s_d2_flexgen: clk-s-d2-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-video", "st,flexgen";
+
+				clocks = <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 2>,
+					 <&clk_s_d2_quadfs 3>,
+					 <&clk_sysin>,
+					 <&clk_sysin>,
+					 <&clk_tmdsout_hdmi>;
+
+				clock-output-names = "clk-pix-main-disp",
+						     "clk-pix-pip",
+						     "clk-pix-gdp1",
+						     "clk-pix-gdp2",
+						     "clk-pix-gdp3",
+						     "clk-pix-gdp4",
+						     "clk-pix-aux-disp",
+						     "clk-denc",
+						     "clk-pix-hddac",
+						     "clk-hddac",
+						     "clk-sddac",
+						     "clk-pix-dvo",
+						     "clk-dvo",
+						     "clk-pix-hdmi",
+						     "clk-tmds-hdmi",
+						     "clk-ref-hdmiphy";
+						     };
+		};
+
+		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9107000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d3-fs0-ch0",
+					     "clk-s-d3-fs0-ch1",
+					     "clk-s-d3-fs0-ch2",
+					     "clk-s-d3-fs0-ch3";
+		};
+
+		clockgen-d3@9107000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9107000 0x1000>;
+
+			clk_s_d3_flexgen: clk-s-d3-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d3_quadfs 0>,
+					 <&clk_s_d3_quadfs 1>,
+					 <&clk_s_d3_quadfs 2>,
+					 <&clk_s_d3_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-stfe-frc1",
+						     "clk-tsout-0",
+						     "clk-tsout-1",
+						     "clk-mchi",
+						     "clk-vsens-compo",
+						     "clk-frc1-remote",
+						     "clk-lpc-0",
+						     "clk-lpc-1";
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/stih407-family.dtsi b/arch/arm/dts/stih407-family.dtsi
new file mode 100644
index 00000000000..af66b534717
--- /dev/null
+++ b/arch/arm/dts/stih407-family.dtsi
@@ -0,0 +1,977 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-pinctrl.dtsi"
+#include <dt-bindings/mfd/st-lpc.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/stih407-resets.h>
+#include <dt-bindings/interrupt-controller/irq-st.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dmu_reserved: rproc@44000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x44000000 0x01000000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
+
+					 /* kHz     uV   */
+			operating-points = <1500000 0
+					    1200000 0
+					    800000  0
+					    500000  0>;
+
+			clocks = <&clk_m_a9>;
+			clock-names = "cpu";
+			clock-latency = <100000>;
+			st,syscfg = <&syscfg_core 0x8e0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
+
+					 /* kHz     uV   */
+			operating-points = <1500000 0
+					    1200000 0
+					    800000  0
+					    500000  0>;
+		};
+	};
+
+	intc: interrupt-controller@08761000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x08761000 0x1000>, <0x08760100 0x100>;
+	};
+
+	scu@08760000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x08760000 0x1000>;
+	};
+
+	timer@08760200 {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x08760200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&arm_periph_clk>;
+	};
+
+	l2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0x08762000 0x1000>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	arm-pmu {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pwm_regulator: pwm-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 3 8448>;
+		regulator-name = "CPU_1V0_AVS";
+		regulator-min-microvolt = <784000>;
+		regulator-max-microvolt = <1299000>;
+		regulator-always-on;
+		max-duty-cycle = <255>;
+		status = "okay";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible = "simple-bus";
+
+		restart {
+			compatible = "st,stih407-restart";
+			st,syscfg = <&syscfg_sbc_reg>;
+			status = "okay";
+		};
+
+		powerdown: powerdown-controller {
+			compatible = "st,stih407-powerdown";
+			#reset-cells = <1>;
+		};
+
+		softreset: softreset-controller {
+			compatible = "st,stih407-softreset";
+			#reset-cells = <1>;
+		};
+
+		picophyreset: picophyreset-controller {
+			compatible = "st,stih407-picophyreset";
+			#reset-cells = <1>;
+		};
+
+		syscfg_sbc: sbc-syscfg@9620000 {
+			compatible = "st,stih407-sbc-syscfg", "syscon";
+			reg = <0x9620000 0x1000>;
+		};
+
+		syscfg_front: front-syscfg@9280000 {
+			compatible = "st,stih407-front-syscfg", "syscon";
+			reg = <0x9280000 0x1000>;
+		};
+
+		syscfg_rear: rear-syscfg@9290000 {
+			compatible = "st,stih407-rear-syscfg", "syscon";
+			reg = <0x9290000 0x1000>;
+		};
+
+		syscfg_flash: flash-syscfg@92a0000 {
+			compatible = "st,stih407-flash-syscfg", "syscon";
+			reg = <0x92a0000 0x1000>;
+		};
+
+		syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
+			compatible = "st,stih407-sbc-reg-syscfg", "syscon";
+			reg = <0x9600000 0x1000>;
+		};
+
+		syscfg_core: core-syscfg@92b0000 {
+			compatible = "st,stih407-core-syscfg", "syscon";
+			reg = <0x92b0000 0x1000>;
+		};
+
+		syscfg_lpm: lpm-syscfg@94b5100 {
+			compatible = "st,stih407-lpm-syscfg", "syscon";
+			reg = <0x94b5100 0x1000>;
+		};
+
+		irq-syscfg {
+			compatible    = "st,stih407-irq-syscfg";
+			st,syscfg     = <&syscfg_core>;
+			st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+					<ST_IRQ_SYSCFG_PMU_1>;
+			st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+					<ST_IRQ_SYSCFG_DISABLED>;
+		};
+
+		/* Display */
+		vtg_main: sti-vtg-main@8d02800 {
+			compatible = "st,vtg";
+			reg = <0x8d02800 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+		};
+
+		vtg_aux: sti-vtg-aux@8d00200 {
+			compatible = "st,vtg";
+			reg = <0x8d00200 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+		};
+
+		serial@9830000 {
+			compatible = "st,asc";
+			reg = <0x9830000 0x2c>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial0>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			status = "disabled";
+		};
+
+		serial@9831000 {
+			compatible = "st,asc";
+			reg = <0x9831000 0x2c>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial1>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			status = "disabled";
+		};
+
+		serial@9832000 {
+			compatible = "st,asc";
+			reg = <0x9832000 0x2c>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial2>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			status = "disabled";
+		};
+
+		/* SBC_ASC0 - UART10 */
+		sbc_serial0: serial@9530000 {
+			compatible = "st,asc";
+			reg = <0x9530000 0x2c>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial0>;
+			clocks = <&clk_sysin>;
+
+			status = "disabled";
+		};
+
+		serial@9531000 {
+			compatible = "st,asc";
+			reg = <0x9531000 0x2c>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial1>;
+			clocks = <&clk_sysin>;
+
+			status = "disabled";
+		};
+
+		i2c@9840000 {
+			compatible = "st,comms-ssc4-i2c";
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x9840000 0x110>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9841000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9842000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9843000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9844000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9845000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9845000 0x110>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c5_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+
+		/* SSCs on SBC */
+		i2c@9540000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9540000 0x110>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c10_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9541000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9541000 0x110>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c11_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb2_picophy0: phy1 {
+			compatible = "st,stih407-usb2-phy";
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0x100 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY2_RESET>;
+			reset-names = "global", "port";
+		};
+
+		miphy28lp_phy: miphy28lp@9b22000 {
+			compatible = "st,miphy28lp-phy";
+			st,syscfg = <&syscfg_core>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+
+			phy_port0: port@9b22000 {
+				reg = <0x9b22000 0xff>,
+				      <0x9b09000 0xff>,
+				      <0x9b04000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x114 0x818 0xe0 0xec>;
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
+			};
+
+			phy_port1: port@9b2a000 {
+				reg = <0x9b2a000 0xff>,
+				      <0x9b19000 0xff>,
+				      <0x9b14000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
+			};
+
+			phy_port2: port@8f95000 {
+				reg = <0x8f95000 0xff>,
+				      <0x8f90000 0xff>;
+				reg-names = "pipew",
+					    "usb3-up";
+
+				st,syscfg = <0x11c 0x820>;
+
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
+			};
+		};
+
+		spi@9840000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9840000 0x110>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-0 = <&pinctrl_spi0_default>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9841000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1_default>;
+
+			status = "disabled";
+		};
+
+		spi@9842000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi2_default>;
+
+			status = "disabled";
+		};
+
+		spi@9843000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi3_default>;
+
+			status = "disabled";
+		};
+
+		spi@9844000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi4_default>;
+
+			status = "disabled";
+		};
+
+		/* SBC SSC */
+		spi@9540000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9540000 0x110>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi10_default>;
+
+			status = "disabled";
+		};
+
+		spi@9541000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9541000 0x110>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi11_default>;
+
+			status = "disabled";
+		};
+
+		spi@9542000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9542000 0x110>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi12_default>;
+
+			status = "disabled";
+		};
+
+		mmc0: sdhci@09060000 {
+			compatible = "st,sdhci-stih407", "st,sdhci";
+			status = "disabled";
+			reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
+			reg-names = "mmc", "top-mmc-delay";
+			interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
+			interrupt-names = "mmcirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mmc0>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
+			bus-width = <8>;
+		};
+
+		mmc1: sdhci@09080000 {
+			compatible = "st,sdhci-stih407", "st,sdhci";
+			status = "disabled";
+			reg = <0x09080000 0x7ff>;
+			reg-names = "mmc";
+			interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
+			interrupt-names = "mmcirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd1>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
+			resets = <&softreset STIH407_MMC1_SOFTRESET>;
+			bus-width = <4>;
+		};
+
+		/* Watchdog and Real-Time Clock */
+		lpc@8787000 {
+			compatible = "st,stih407-lpc";
+			reg = <0x8787000 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+			timeout-sec = <120>;
+			st,syscfg = <&syscfg_core>;
+			st,lpc-mode = <ST_LPC_MODE_WDT>;
+		};
+
+		lpc@8788000 {
+			compatible = "st,stih407-lpc";
+			reg = <0x8788000 0x1000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
+			st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
+		};
+
+		sata0: sata@9b20000 {
+			compatible = "st,ahci";
+			reg = <0x9b20000 0x1000>;
+
+			interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+			interrupt-names = "hostc";
+
+			phys = <&phy_port0 PHY_TYPE_SATA>;
+			phy-names = "ahci_phy";
+
+			resets = <&powerdown STIH407_SATA0_POWERDOWN>,
+				 <&softreset STIH407_SATA0_SOFTRESET>,
+				 <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+			reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
+
+			clock-names = "ahci_clk";
+			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+			ports-implemented = <0x1>;
+
+			status = "disabled";
+		};
+
+		sata1: sata@9b28000 {
+			compatible = "st,ahci";
+			reg = <0x9b28000 0x1000>;
+
+			interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
+			interrupt-names = "hostc";
+
+			phys = <&phy_port1 PHY_TYPE_SATA>;
+			phy-names = "ahci_phy";
+
+			resets = <&powerdown STIH407_SATA1_POWERDOWN>,
+				 <&softreset STIH407_SATA1_SOFTRESET>,
+				 <&softreset STIH407_SATA1_PWR_SOFTRESET>;
+			reset-names = "pwr-dwn",
+				      "sw-rst",
+				      "pwr-rst";
+
+			clock-names = "ahci_clk";
+			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+			ports-implemented = <0x1>;
+
+			status = "disabled";
+		};
+
+
+		st_dwc3: dwc3@8f94000 {
+			compatible	= "st,stih407-dwc3";
+			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
+			reg-names	= "reg-glue", "syscfg-reg";
+			st,syscfg	= <&syscfg_core>;
+			resets		= <&powerdown STIH407_USB3_POWERDOWN>,
+					  <&softreset STIH407_MIPHY2_SOFTRESET>;
+			reset-names	= "powerdown", "softreset";
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_usb3>;
+			ranges;
+
+			status = "disabled";
+
+			dwc3: dwc3@9900000 {
+				compatible	= "snps,dwc3";
+				reg		= <0x09900000 0x100000>;
+				interrupts	= <GIC_SPI 155 IRQ_TYPE_NONE>;
+				dr_mode		= "host";
+				phy-names	= "usb2-phy", "usb3-phy";
+				phys		= <&usb2_picophy0>,
+						  <&phy_port2 PHY_TYPE_USB3>;
+			};
+		};
+
+		/* COMMS PWM Module */
+		pwm0: pwm@9810000 {
+			compatible	= "st,sti-pwm";
+			#pwm-cells	= <2>;
+			reg		= <0x9810000 0x68>;
+			interrupts      = <GIC_SPI 128 IRQ_TYPE_NONE>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <1>;
+
+			status		= "disabled";
+		};
+
+		/* SBC PWM Module */
+		pwm1: pwm@9510000 {
+			compatible	= "st,sti-pwm";
+			#pwm-cells	= <2>;
+			reg		= <0x9510000 0x68>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm1_chan0_default
+					&pinctrl_pwm1_chan1_default
+					&pinctrl_pwm1_chan2_default
+					&pinctrl_pwm1_chan3_default>;
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <4>;
+
+			status		= "disabled";
+		};
+
+		rng10: rng@08a89000 {
+			compatible      = "st,rng";
+			reg		= <0x08a89000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		rng11: rng@08a8a000 {
+			compatible      = "st,rng";
+			reg		= <0x08a8a000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			device_type = "network";
+			status = "disabled";
+			compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+			reg = <0x9630000 0x8000>, <0x80 0x4>;
+			reg-names = "stmmaceth", "sti-ethconf";
+
+			st,syscon = <&syscfg_sbc_reg 0x80>;
+			st,gmac_en;
+			resets = <&softreset STIH407_ETH1_SOFTRESET>;
+			reset-names = "stmmaceth";
+
+			interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
+				     <GIC_SPI 99 IRQ_TYPE_NONE>;
+			interrupt-names = "macirq", "eth_wake_irq";
+
+			/* DMA Bus Mode */
+			snps,pbl = <8>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_rgmii1>;
+
+			clock-names = "stmmaceth", "sti-ethclk";
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_ETH_PHY>;
+		};
+
+		cec: sti-cec@094a087c {
+			compatible = "st,stih-cec";
+			reg = <0x94a087c 0x64>;
+			clocks = <&clk_sysin>;
+			clock-names = "cec-clk";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+			interrupt-names = "cec-irq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_cec0_default>;
+			resets = <&softreset STIH407_LPM_SOFTRESET>;
+		};
+
+		rng10: rng@08a89000 {
+			compatible      = "st,rng";
+			reg		= <0x08a89000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		rng11: rng@08a8a000 {
+			compatible      = "st,rng";
+			reg		= <0x08a8a000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		mailbox0: mailbox@8f00000  {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f00000 0x1000>;
+			interrupts	= <GIC_SPI 1 IRQ_TYPE_NONE>;
+			#mbox-cells	= <2>;
+			mbox-name	= "a9";
+			status		= "okay";
+		};
+
+		mailbox1: mailbox@8f01000 {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f01000 0x1000>;
+			#mbox-cells	= <2>;
+			mbox-name	= "st231_gp_1";
+			status		= "okay";
+		};
+
+		mailbox2: mailbox@8f02000 {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f02000 0x1000>;
+			#mbox-cells	= <2>;
+			mbox-name	= "st231_gp_0";
+			status		= "okay";
+		};
+
+		mailbox3: mailbox@8f03000 {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f03000 0x1000>;
+			#mbox-cells	= <2>;
+			mbox-name	= "st231_audio_video";
+			status		= "okay";
+		};
+
+		st231_delta: st231-delta@44000000 {
+			compatible	= "st,st231-rproc";
+			memory-region	= <&dmu_reserved>;
+			resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
+			reset-names	= "sw_reset";
+			clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
+			clock-frequency	= <600000000>;
+			st,syscfg	= <&syscfg_core 0x224>;
+			#mbox-cells = <1>;
+			mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+			mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
+		};
+
+		/* fdma audio */
+		fdma0: dma-controller@8e20000 {
+			compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+			reg = <0x8e20000 0x8000>,
+			      <0x8e30000 0x3000>,
+			      <0x8e37000 0x1000>,
+			      <0x8e38000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+		};
+
+		/* fdma app */
+		fdma1: dma-controller@8e40000 {
+			compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
+			reg = <0x8e40000 0x8000>,
+			      <0x8e50000 0x3000>,
+			      <0x8e57000 0x1000>,
+			      <0x8e58000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+		};
+
+		/* fdma free running */
+		fdma2: dma-controller@8e60000 {
+			compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
+			reg = <0x8e60000 0x8000>,
+			      <0x8e70000 0x3000>,
+			      <0x8e77000 0x1000>,
+			      <0x8e78000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+		};
+
+		sti_sasg_codec: sti-sasg-codec {
+			compatible = "st,stih407-sas-codec";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+			st,syscfg = <&syscfg_core>;
+		};
+
+		sti_uni_player0: sti-uni-player@8d80000 {
+			compatible = "st,stih407-uni-player-hdmi";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
+			assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d80000 0x158>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 2 0 1>;
+			dma-names = "tx";
+
+			status		= "disabled";
+		};
+
+		sti_uni_player1: sti-uni-player@8d81000 {
+			compatible = "st,stih407-uni-player-pcm-out";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
+			assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d81000 0x158>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 3 0 1>;
+			dma-names = "tx";
+
+			status = "disabled";
+		};
+
+		sti_uni_player2: sti-uni-player@8d82000 {
+			compatible = "st,stih407-uni-player-dac";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+			assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d82000 0x158>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 4 0 1>;
+			dma-names = "tx";
+
+			status = "disabled";
+		};
+
+		sti_uni_player3: sti-uni-player@8d85000 {
+			compatible = "st,stih407-uni-player-spdif";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
+			assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d85000 0x158>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 7 0 1>;
+			dma-names = "tx";
+
+			status = "disabled";
+		};
+
+		sti_uni_reader0: sti-uni-reader@8d83000 {
+			compatible = "st,stih407-uni-reader-pcm_in";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			reg = <0x8d83000 0x158>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 5 0 1>;
+			dma-names = "rx";
+
+			status = "disabled";
+		};
+
+		sti_uni_reader1: sti-uni-reader@8d84000 {
+			compatible = "st,stih407-uni-reader-hdmi";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			reg = <0x8d84000 0x158>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 6 0 1>;
+			dma-names = "rx";
+
+			status = "disabled";
+		};
+
+		rc: rc@09518000 {
+			compatible = "st,comms-irb";
+			reg = <0x09518000 0x234>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_NONE>;
+			rx-mode = "infrared";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ir
+				     &pinctrl_uhf
+				     &pinctrl_tx
+				     &pinctrl_tx_od>;
+			clocks = <&clk_sysin>;
+			resets = <&softreset STIH407_IRB_SOFTRESET>;
+
+			status = "disabled";
+		};
+
+		socinfo {
+			compatible = "st,stih407-socinfo";
+			st,syscfg = <&syscfg_core>;
+		};
+	};
+};
diff --git a/arch/arm/dts/stih407-pinctrl.dtsi b/arch/arm/dts/stih407-pinctrl.dtsi
new file mode 100644
index 00000000000..f27ae21f676
--- /dev/null
+++ b/arch/arm/dts/stih407-pinctrl.dtsi
@@ -0,0 +1,1303 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+	aliases {
+		/* 0-5: PIO_SBC */
+		gpio0 = &pio0;
+		gpio1 = &pio1;
+		gpio2 = &pio2;
+		gpio3 = &pio3;
+		gpio4 = &pio4;
+		gpio5 = &pio5;
+		/* 10-19: PIO_FRONT0 */
+		gpio6 = &pio10;
+		gpio7 = &pio11;
+		gpio8 = &pio12;
+		gpio9 = &pio13;
+		gpio10 = &pio14;
+		gpio11 = &pio15;
+		gpio12 = &pio16;
+		gpio13 = &pio17;
+		gpio14 = &pio18;
+		gpio15 = &pio19;
+		/* 20: PIO_FRONT1 */
+		gpio16 = &pio20;
+		/* 30-35: PIO_REAR */
+		gpio17 = &pio30;
+		gpio18 = &pio31;
+		gpio19 = &pio32;
+		gpio20 = &pio33;
+		gpio21 = &pio34;
+		gpio22 = &pio35;
+		/* 40-42: PIO_FLASH */
+		gpio23 = &pio40;
+		gpio24 = &pio41;
+		gpio25 = &pio42;
+	};
+
+	soc {
+		pin-controller-sbc {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-sbc-pinctrl";
+			st,syscfg = <&syscfg_sbc>;
+			reg = <0x0961f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09610000 0x6000>;
+
+			pio0: gpio@09610000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO0";
+			};
+			pio1: gpio@09611000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO1";
+			};
+			pio2: gpio@09612000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO2";
+			};
+			pio3: gpio@09613000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO3";
+			};
+			pio4: gpio@09614000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO4";
+			};
+
+			pio5: gpio@09615000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO5";
+				st,retime-pin-mask = <0x3f>;
+			};
+
+			cec0 {
+				pinctrl_cec0_default: cec0-default {
+					st,pins {
+						hdmi_cec = <&pio2 4 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			rc {
+				pinctrl_ir: ir0 {
+					st,pins {
+						ir = <&pio4 0 ALT2 IN>;
+					};
+				};
+
+				pinctrl_uhf: uhf0 {
+					st,pins {
+						ir = <&pio4 1 ALT2 IN>;
+					};
+				};
+
+				pinctrl_tx: tx0 {
+					st,pins {
+						tx = <&pio4 2 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_tx_od: tx_od0 {
+					st,pins {
+						tx_od = <&pio4 3 ALT2 OUT>;
+					};
+				};
+			};
+
+			/* SBC_ASC0 - UART10 */
+			sbc_serial0 {
+				pinctrl_sbc_serial0: sbc_serial0-0 {
+					st,pins {
+						tx = <&pio3 4 ALT1 OUT>;
+						rx = <&pio3 5 ALT1 IN>;
+					};
+				};
+			};
+			/* SBC_ASC1 - UART11 */
+			sbc_serial1 {
+				pinctrl_sbc_serial1: sbc_serial1-0 {
+					st,pins {
+						tx = <&pio2 6 ALT3 OUT>;
+						rx = <&pio2 7 ALT3 IN>;
+					};
+				};
+			};
+
+			i2c10 {
+				pinctrl_i2c10_default: i2c10-default {
+					st,pins {
+						sda = <&pio4 6 ALT1 BIDIR>;
+						scl = <&pio4 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c11 {
+				pinctrl_i2c11_default: i2c11-default {
+					st,pins {
+						sda = <&pio5 1 ALT1 BIDIR>;
+						scl = <&pio5 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&pio4 0 ALT6 IN>;
+						keyin1 = <&pio4 5 ALT4 IN>;
+						keyin2 = <&pio0 4 ALT2 IN>;
+						keyin3 = <&pio2 6 ALT2 IN>;
+
+						keyout0 = <&pio4 6 ALT4 OUT>;
+						keyout1 = <&pio1 7 ALT2 OUT>;
+						keyout2 = <&pio0 6 ALT2 OUT>;
+						keyout3 = <&pio2 7 ALT2 OUT>;
+					};
+				};
+			};
+
+			gmac1 {
+				/*
+				 * Almost all the boards based on STiH407 SoC have an embedded
+				 * switch where the mdio/mdc have been used for managing the SMI
+				 * iface via I2C. For this reason these lines can be allocated
+				 * by using dedicated configuration (in case of there will be a
+				 * standard PHY transceiver on-board).
+				 */
+				pinctrl_rgmii1: rgmii1-0 {
+					st,pins {
+
+						txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
+						rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+						clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>;
+					};
+				};
+
+				pinctrl_rgmii1_mdio: rgmii1-mdio {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+					};
+				};
+
+				pinctrl_rgmii1_mdio_1: rgmii1-mdio-1 {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
+				pinctrl_mii1: mii1 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						col = <&pio0 7 ALT1 IN BYPASS 1000>;
+
+						mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1: rmii1-0 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1_phyclk: rmii1_phyclk {
+					st,pins {
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext {
+					st,pins {
+						phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>;
+					};
+				};
+			};
+
+			pwm1 {
+				pinctrl_pwm1_chan0_default: pwm1-0-default {
+					st,pins {
+						pwm-out = <&pio3 0 ALT1 OUT>;
+						pwm-capturein = <&pio3 2 ALT1 IN>;
+					};
+				};
+				pinctrl_pwm1_chan1_default: pwm1-1-default {
+					st,pins {
+						pwm-capturein = <&pio4 3 ALT1 IN>;
+						pwm-out = <&pio4 4 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan2_default: pwm1-2-default {
+					st,pins {
+						pwm-out = <&pio4 6 ALT3 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan3_default: pwm1-3-default {
+					st,pins {
+						pwm-out = <&pio4 7 ALT3 OUT>;
+					};
+				};
+			};
+
+			spi10 {
+				pinctrl_spi10_default: spi10-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio4 6 ALT1 OUT>;
+						mrst = <&pio4 7 ALT1 IN>;
+						scl = <&pio4 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio4 6 ALT1 BIDIR_PU>;
+						scl = <&pio4 5 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi11 {
+				pinctrl_spi11_default: spi11-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 1 ALT2 OUT>;
+						mrst = <&pio3 0 ALT2 IN>;
+						scl = <&pio3 2 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 1 ALT2 BIDIR_PU>;
+						scl = <&pio3 2 ALT2 OUT>;
+					};
+				};
+			};
+
+			spi12 {
+				pinctrl_spi12_default: spi12-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 6 ALT2 OUT>;
+						mrst = <&pio3 4 ALT2 IN>;
+						scl = <&pio3 7 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 6 ALT2 BIDIR_PU>;
+						scl = <&pio3 7 ALT2 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0920f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09200000 0x10000>;
+
+			pio10: pio@09200000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO10";
+			};
+			pio11: pio@09201000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO11";
+			};
+			pio12: pio@09202000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO12";
+			};
+			pio13: pio@09203000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO13";
+			};
+			pio14: pio@09204000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO14";
+			};
+			pio15: pio@09205000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO15";
+			};
+			pio16: pio@09206000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x100>;
+				st,bank-name = "PIO16";
+			};
+			pio17: pio@09207000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x100>;
+				st,bank-name = "PIO17";
+			};
+			pio18: pio@09208000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x100>;
+				st,bank-name = "PIO18";
+			};
+			pio19: pio@09209000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x100>;
+				st,bank-name = "PIO19";
+			};
+
+			/* Comms */
+			serial0 {
+				pinctrl_serial0: serial0-0 {
+					st,pins {
+						tx = <&pio17 0 ALT1 OUT>;
+						rx = <&pio17 1 ALT1 IN>;
+					};
+				};
+				pinctrl_serial0_rts: serial0_rts {
+					st,pins {
+						rts = <&pio17 3 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_serial0_cts: serial0_cts {
+					st,pins {
+						cts = <&pio17 2 ALT1 IN>;
+					};
+				};
+			};
+
+			serial1 {
+				pinctrl_serial1: serial1-0 {
+					st,pins {
+						tx = <&pio16 0 ALT1 OUT>;
+						rx = <&pio16 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial2 {
+				pinctrl_serial2: serial2-0 {
+					st,pins {
+						tx = <&pio15 0 ALT1 OUT>;
+						rx = <&pio15 1 ALT1 IN>;
+					};
+				};
+			};
+
+			mmc1 {
+				pinctrl_sd1: sd1-0 {
+					st,pins {
+						sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
+						sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
+						sd_led = <&pio16 6 ALT6 OUT>;
+						sd_pwren = <&pio16 7 ALT6 OUT>;
+						sd_cd = <&pio19 0 ALT6 IN>;
+						sd_wp = <&pio19 1 ALT6 IN>;
+					};
+				};
+			};
+
+
+			i2c0 {
+				pinctrl_i2c0_default: i2c0-default {
+					st,pins {
+						sda = <&pio10 6 ALT2 BIDIR>;
+						scl = <&pio10 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c1 {
+				pinctrl_i2c1_default: i2c1-default {
+					st,pins {
+						sda = <&pio11 1 ALT2 BIDIR>;
+						scl = <&pio11 0 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c2 {
+				pinctrl_i2c2_default: i2c2-default {
+					st,pins {
+						sda = <&pio15 6 ALT2 BIDIR>;
+						scl = <&pio15 5 ALT2 BIDIR>;
+					};
+				};
+
+				pinctrl_i2c2_alt2_1: i2c2-alt2-1 {
+					st,pins {
+						sda = <&pio12 6 ALT2 BIDIR>;
+						scl = <&pio12 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c3 {
+				pinctrl_i2c3_default: i2c3-alt1-0 {
+					st,pins {
+						sda = <&pio18 6 ALT1 BIDIR>;
+						scl = <&pio18 5 ALT1 BIDIR>;
+					};
+				};
+				pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
+					st,pins {
+						sda = <&pio17 7 ALT1 BIDIR>;
+						scl = <&pio17 6 ALT1 BIDIR>;
+					};
+				};
+				pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
+					st,pins {
+						sda = <&pio13 6 ALT3 BIDIR>;
+						scl = <&pio13 5 ALT3 BIDIR>;
+					};
+				};
+			};
+
+			spi0 {
+				pinctrl_spi0_default: spi0-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio10 6 ALT2 OUT>;
+						mrst = <&pio10 7 ALT2 IN>;
+						scl = <&pio10 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio10 6 ALT2 BIDIR_PU>;
+						scl = <&pio10 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio19 7 ALT1 OUT>;
+						mrst = <&pio19 5 ALT1 IN>;
+						scl = <&pio19 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio19 7 ALT1 BIDIR_PU>;
+						scl = <&pio19 6 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi1 {
+				pinctrl_spi1_default: spi1-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio11 1 ALT2 OUT>;
+						mrst = <&pio11 2 ALT2 IN>;
+						scl = <&pio11 0 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio11 1 ALT2 BIDIR_PU>;
+						scl = <&pio11 0 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 3 ALT1 OUT>;
+						mrst = <&pio14 4 ALT1 IN>;
+						scl = <&pio14 2 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 3 ALT1 BIDIR_PU>;
+						scl = <&pio14 2 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi2 {
+				pinctrl_spi2_default: spi2-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 OUT>;
+						mrst = <&pio12 7 ALT2 IN>;
+						scl = <&pio12 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 BIDIR_PU>;
+						scl = <&pio12 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 6 ALT1 OUT>;
+						mrst = <&pio14 7 ALT1 IN>;
+						scl = <&pio14 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 6 ALT1 BIDIR_PU>;
+						scl = <&pio14 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 {
+					st,pins {
+						mtsr = <&pio15 6 ALT2 OUT>;
+						mrst = <&pio15 7 ALT2 IN>;
+						scl = <&pio15 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 {
+					st,pins {
+						mtsr = <&pio15 6 ALT2 BIDIR_PU>;
+						scl = <&pio15 5 ALT2 OUT>;
+					};
+				};
+			};
+
+			spi3 {
+				pinctrl_spi3_default: spi3-4w-alt3-0 {
+					st,pins {
+						mtsr = <&pio13 6 ALT3 OUT>;
+						mrst = <&pio13 7 ALT3 IN>;
+						scl = <&pio13 5 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 {
+					st,pins {
+						mtsr = <&pio13 6 ALT3 BIDIR_PU>;
+						scl = <&pio13 5 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio17 7 ALT1 OUT>;
+						mrst = <&pio17 5 ALT1 IN>;
+						scl = <&pio17 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio17 7 ALT1 BIDIR_PU>;
+						scl = <&pio17 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 {
+					st,pins {
+						mtsr = <&pio18 6 ALT1 OUT>;
+						mrst = <&pio18 7 ALT1 IN>;
+						scl = <&pio18 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 {
+					st,pins {
+						mtsr = <&pio18 6 ALT1 BIDIR_PU>;
+						scl = <&pio18 5 ALT1 OUT>;
+					};
+				};
+			};
+
+			tsin0 {
+				pinctrl_tsin0_parallel: tsin0_parallel {
+					st,pins {
+						DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio10 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio10 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio10 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio11 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio11 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio11 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio11 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin0_serial: tsin0_serial {
+					st,pins {
+						DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin1 {
+				pinctrl_tsin1_parallel: tsin1_parallel {
+					st,pins {
+						DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio12 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio12 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio12 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio12 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio12 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio12 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio12 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin1_serial: tsin1_serial {
+					st,pins {
+						DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin2 {
+				pinctrl_tsin2_parallel: tsin2_parallel {
+					st,pins {
+						DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio13 5 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA5 = <&pio13 6 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA4 = <&pio13 7 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA3 = <&pio14 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio14 1 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA1 = <&pio14 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio14 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin2_serial: tsin2_serial {
+					st,pins {
+						DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin3 {
+				pinctrl_tsin3_serial: tsin3_serial {
+					st,pins {
+						DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin4 {
+				pinctrl_tsin4_serial_alt3: tsin4_serial_alt3 {
+					st,pins {
+						DATA7 = <&pio14 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio14 5 ALT3 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio14 3 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+						ERROR = <&pio14 2 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+						PKCLK = <&pio14 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin5 {
+				pinctrl_tsin5_serial_alt1: tsin5_serial_alt1 {
+					st,pins {
+						DATA7 = <&pio18 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio18 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio18 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio18 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio18 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin5_serial_alt2: tsin5_serial_alt2 {
+					st,pins {
+						DATA7 = <&pio19 4 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio19 3 ALT2 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio19 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio19 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio19 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsout0 {
+				pinctrl_tsout0_parallel: tsout0_parallel {
+					st,pins {
+						DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio12 1 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio12 2 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio12 3 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio12 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio12 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio12 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio12 7 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+						VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsout0_serial: tsout0_serial {
+					st,pins {
+						DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+						VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsout1 {
+				pinctrl_tsout1_serial: tsout1_serial {
+					st,pins {
+						DATA7 = <&pio19 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio19 3 ALT1 OUT NICLK 0 CLK_A>;
+						VALID = <&pio19 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio19 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio19 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			mtsin0 {
+				pinctrl_mtsin0_parallel: mtsin0_parallel {
+					st,pins {
+						DATA7 = <&pio10 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio10 5 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio10 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio10 7 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio11 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio11 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio11 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio11 3 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT3 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			systrace {
+				pinctrl_systrace_default: systrace-default {
+					st,pins {
+						trc_data0 = <&pio11 3 ALT5 OUT>;
+						trc_data1 = <&pio11 4 ALT5 OUT>;
+						trc_data2 = <&pio11 5 ALT5 OUT>;
+						trc_data3 = <&pio11 6 ALT5 OUT>;
+						trc_clk   = <&pio11 7 ALT5 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front1 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0921f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09210000 0x10000>;
+
+			pio20: pio@09210000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO20";
+			};
+
+			tsin4 {
+				pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
+					st,pins {
+						DATA7 = <&pio20 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio20 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio20 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio20 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio20 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+		};
+
+		pin-controller-rear {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-rear-pinctrl";
+			st,syscfg = <&syscfg_rear>;
+			reg = <0x0922f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09220000 0x6000>;
+
+			pio30: gpio@09220000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO30";
+			};
+			pio31: gpio@09221000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO31";
+			};
+			pio32: gpio@09222000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO32";
+			};
+			pio33: gpio@09223000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO33";
+			};
+			pio34: gpio@09224000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO34";
+			};
+			pio35: gpio@09225000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO35";
+				st,retime-pin-mask = <0x7f>;
+			};
+
+			dvo {
+				pinctrl_dvo: dvo {
+					st,pins {
+						hs = <&pio30 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						vs = <&pio30 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						de = <&pio30 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						ck = <&pio30 3 ALT2 (OE | CLKNOTDATA) 0>;
+						d0 = <&pio30 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d1 = <&pio30 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d2 = <&pio30 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d3 = <&pio30 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d4 = <&pio31 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d5 = <&pio31 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d6 = <&pio31 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d7 = <&pio31 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d8 = <&pio31 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d9 = <&pio31 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d10 = <&pio31 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d11 = <&pio31 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d12 = <&pio32 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d13 = <&pio32 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d14 = <&pio32 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d15 = <&pio32 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d16 = <&pio32 4 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d17 = <&pio32 5 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d18 = <&pio32 6 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d19 = <&pio32 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d20 = <&pio33 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d21 = <&pio33 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d22 = <&pio33 2 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						d23 = <&pio33 3 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			i2c4 {
+				pinctrl_i2c4_default: i2c4-default {
+					st,pins {
+						sda = <&pio30 1 ALT1 BIDIR>;
+						scl = <&pio30 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c5 {
+				pinctrl_i2c5_default: i2c5-default {
+					st,pins {
+						sda = <&pio34 4 ALT1 BIDIR>;
+						scl = <&pio34 3 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			usb3 {
+				pinctrl_usb3: usb3-2 {
+					st,pins {
+						usb-oc-detect = <&pio35 4 ALT1 IN>;
+						usb-pwr-enable = <&pio35 5 ALT1 OUT>;
+						usb-vbus-valid = <&pio35 6 ALT1 IN>;
+					};
+				};
+			};
+
+			pwm0 {
+				pinctrl_pwm0_chan0_default: pwm0-0-default {
+					st,pins {
+						pwm-capturein = <&pio31 0 ALT1 IN>;
+						pwm-out = <&pio31 1 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi4 {
+				pinctrl_spi4_default: spi4-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio30 1 ALT1 OUT>;
+						mrst = <&pio30 2 ALT1 IN>;
+						scl = <&pio30 0 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio30 1 ALT1 BIDIR_PU>;
+						scl = <&pio30 0 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 {
+					st,pins {
+						mtsr = <&pio34 1 ALT3 OUT>;
+						mrst = <&pio34 2 ALT3 IN>;
+						scl = <&pio34 0 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 {
+					st,pins {
+						mtsr = <&pio34 1 ALT3 BIDIR_PU>;
+						scl = <&pio34 0 ALT3 OUT>;
+					};
+				};
+			};
+
+			i2s_out {
+				pinctrl_i2s_8ch_out: i2s_8ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+						data1 = <&pio34 0 ALT1 OUT>;
+						data2 = <&pio34 1 ALT1 OUT>;
+						data3 = <&pio34 2 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_i2s_2ch_out: i2s_2ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+					};
+				};
+			};
+
+			i2s_in {
+				pinctrl_i2s_8ch_in: i2s_8ch_in{
+					st,pins {
+						mclk = <&pio32 5 ALT1 IN>;
+						lrclk = <&pio32 7 ALT1 IN>;
+						sclk = <&pio32 6 ALT1 IN>;
+						data0 = <&pio32 4 ALT1 IN>;
+						data1 = <&pio33 0 ALT1 IN>;
+						data2 = <&pio33 1 ALT1 IN>;
+						data3 = <&pio33 2 ALT1 IN>;
+						data4 = <&pio33 3 ALT1 IN>;
+					};
+				};
+
+				pinctrl_i2s_2ch_in: i2s_2ch_in{
+					st,pins {
+						mclk = <&pio32 5 ALT1 IN>;
+						lrclk = <&pio32 7 ALT1 IN>;
+						sclk = <&pio32 6 ALT1 IN>;
+						data0 = <&pio32 4 ALT1 IN>;
+					};
+				};
+			};
+
+			spdif_out {
+				pinctrl_spdif_out: spdif_out{
+					st,pins {
+						spdif_out = <&pio34 7 ALT1 OUT>;
+					};
+				};
+			};
+
+			serial3 {
+				pinctrl_serial3: serial3-0 {
+					st,pins {
+						tx = <&pio31 3 ALT1 OUT>;
+						rx = <&pio31 4 ALT1 IN>;
+					};
+				};
+			};
+		};
+
+		pin-controller-flash {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-flash-pinctrl";
+			st,syscfg = <&syscfg_flash>;
+			reg = <0x0923f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09230000 0x3000>;
+
+			pio40: gpio@09230000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x100>;
+				st,bank-name = "PIO40";
+			};
+			pio41: gpio@09231000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO41";
+			};
+			pio42: gpio@09232000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO42";
+			};
+
+			mmc0 {
+				pinctrl_mmc0: mmc0-0 {
+					st,pins {
+						emmc_clk = <&pio40 6 ALT1 BIDIR>;
+						emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+						emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
+						emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
+						emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
+						emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
+						emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
+						emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
+						emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
+						emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
+					};
+				};
+				pinctrl_sd0: sd0-0 {
+					st,pins {
+						sd_clk = <&pio40 6 ALT1 BIDIR>;
+						sd_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+						sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>;
+						sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>;
+						sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>;
+						sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>;
+						sd_led = <&pio42 0 ALT2 OUT>;
+						sd_pwren = <&pio42 2 ALT2 OUT>;
+						sd_vsel = <&pio42 3 ALT2 OUT>;
+						sd_cd = <&pio42 4 ALT2 IN>;
+						sd_wp = <&pio42 5 ALT2 IN>;
+					};
+				};
+			};
+
+			fsm {
+				pinctrl_fsm: fsm {
+					st,pins {
+						spi-fsm-clk = <&pio40 1 ALT1 OUT>;
+						spi-fsm-cs = <&pio40 0 ALT1 OUT>;
+						spi-fsm-mosi = <&pio40 2 ALT1 OUT>;
+						spi-fsm-miso = <&pio40 3 ALT1 IN>;
+						spi-fsm-hol = <&pio40 5 ALT1 OUT>;
+						spi-fsm-wp = <&pio40 4 ALT1 OUT>;
+					};
+				};
+			};
+
+			nand {
+				pinctrl_nand: nand {
+					st,pins {
+						nand_cs1 = <&pio40 6 ALT3 OUT>;
+						nand_cs0 = <&pio40 7 ALT3 OUT>;
+						nand_d0 = <&pio41 0 ALT3 BIDIR>;
+						nand_d1 = <&pio41 1 ALT3 BIDIR>;
+						nand_d2 = <&pio41 2 ALT3 BIDIR>;
+						nand_d3 = <&pio41 3 ALT3 BIDIR>;
+						nand_d4 = <&pio41 4 ALT3 BIDIR>;
+						nand_d5 = <&pio41 5 ALT3 BIDIR>;
+						nand_d6 = <&pio41 6 ALT3 BIDIR>;
+						nand_d7 = <&pio41 7 ALT3 BIDIR>;
+						nand_we = <&pio42 0 ALT3 OUT>;
+						nand_dqs = <&pio42 1 ALT3 OUT>;
+						nand_ale = <&pio42 2 ALT3 OUT>;
+						nand_cle = <&pio42 3 ALT3 OUT>;
+						nand_rnb = <&pio42 4 ALT3 IN>;
+						nand_oe = <&pio42 5 ALT3 OUT>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/stih410-b2260.dts b/arch/arm/dts/stih410-b2260.dts
new file mode 100644
index 00000000000..54250e25182
--- /dev/null
+++ b/arch/arm/dts/stih410-b2260.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
+ * Author: Patrice Chotard <patrice.chotard@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STiH410 B2260";
+	compatible = "st,stih410-b2260", "st,stih410";
+
+	chosen {
+		bootargs = "console=ttyAS1,115200";
+		linux,stdout-path = &uart1;
+		stdout-path = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	aliases {
+		ttyAS1 = &uart1;
+		ethernet0 = &ethernet0;
+	};
+
+	soc {
+
+		leds {
+			compatible = "gpio-leds";
+			user_green_1 {
+				label = "User_green_1";
+				gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "heartbeat";
+				default-state = "off";
+			};
+
+			user_green_2 {
+				label = "User_green_2";
+				gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			user_green_3 {
+				label = "User_green_3";
+				gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			user_green_4 {
+				label = "User_green_4";
+				gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			wifi_yellow {
+				label = "Wifi_yellow";
+				gpios = <&pio4 0 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "wifi-activity";
+				default-state = "off";
+			};
+
+			bt_blue {
+				label = "Bluetooth_blue";
+				gpios = <&pio3 3 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "hci0-power";
+				default-state = "off";
+			};
+		};
+
+		/* Low speed expansion connector */
+		uart0: serial@9830000 {
+			label = "LS-UART0";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		uart1: serial@9831000 {
+			label = "LS-UART1";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		spi0: spi@9844000 {
+			label = "LS-SPI0";
+			cs-gpios = <&pio30 3 0>;
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		i2c0: i2c@9840000 {
+			label = "LS-I2C0";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		i2c1: i2c@9841000 {
+			label = "LS-I2C1";
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		i2c2: i2c@9842000 {
+			label = "HS-I2C2";
+			pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		i2c3: i2c@9843000 {
+			label = "HS-I2C3";
+			pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
+			status = "okay";
+		};
+
+		mmc0: sdhci@09060000 {
+			pinctrl-0 = <&pinctrl_sd0>;
+			bus-width = <4>;
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		mmc1: sdhci@09080000 {
+			status = "okay";
+		};
+
+		pwm0: pwm@9810000 {
+			status = "okay";
+		};
+
+		pwm1: pwm@9510000 {
+			status = "okay";
+		};
+
+		usb2_picophy1: phy2 {
+			status = "okay";
+		};
+
+		usb2_picophy2: phy3 {
+			status = "okay";
+		};
+
+		ohci0: usb@9a03c00 {
+			status = "okay";
+		};
+
+		ehci0: usb@9a03e00 {
+			status = "okay";
+		};
+
+		ohci1: usb@9a83c00 {
+			status = "okay";
+		};
+
+		ehci1: usb@9a83e00 {
+			status = "okay";
+		};
+
+		st_dwc3: dwc3@8f94000 {
+			status = "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			phy-mode = "rgmii";
+			pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
+
+			snps,phy-bus-name = "stmmac";
+			snps,phy-bus-id = <0>;
+			snps,phy-addr = <0>;
+			snps,reset-gpio = <&pio0 7 0>;
+			snps,reset-active-low;
+			snps,reset-delays-us = <0 10000 1000000>;
+
+			status = "okay";
+		};
+
+		sti_uni_player0: sti-uni-player@8d80000 {
+			status = "okay";
+		};
+
+		/* SSC11 to HDMI */
+		hdmiddc: i2c@9541000 {
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <1>;
+			status = "okay";
+		};
+
+		miphy28lp_phy: miphy28lp@9b22000 {
+			phy_port1: port@9b2a000 {
+				st,osc-force-ext;
+			};
+		};
+
+		sata1: sata@9b28000 {
+			status = "okay";
+		};
+
+		sound {
+			compatible = "simple-audio-card";
+			simple-audio-card,name = "STI-B2260";
+			status = "okay";
+
+			simple-audio-card,dai-link@0 {
+				/* DAC */
+				format = "i2s";
+				mclk-fs = <128>;
+				cpu {
+					sound-dai = <&sti_uni_player0>;
+				};
+
+				codec {
+					sound-dai = <&sti_hdmi>;
+				};
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/dts/stih410-clock.dtsi b/arch/arm/dts/stih410-clock.dtsi
new file mode 100644
index 00000000000..8598effd6c0
--- /dev/null
+++ b/arch/arm/dts/stih410-clock.dtsi
@@ -0,0 +1,347 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <dt-bindings/clock/stih410-clks.h>
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		compatible = "st,stih410-clk", "simple-bus";
+
+		/*
+		 * Fixed 30MHz oscillator inputs to SoC
+		 */
+		clk_sysin: clk-sysin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+			clock-output-names = "CLK_SYSIN";
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: clk-m-a9-periphs {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_m_a9>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * A9 PLL.
+		 */
+		clockgen-a9@92b0000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x92b0000 0xffff>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-clkgen-plla9";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks.
+		 */
+		clk_m_a9: clk-m-a9@92b0000 {
+			#clock-cells = <0>;
+			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0x92b0000 0x10000>;
+
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_s_c0_flexgen 13>,
+				 <&clk_m_a9_ext2f_div2>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+
+			clocks = <&clk_s_c0_flexgen 13>;
+
+			clock-output-names = "clk-m-a9-ext2f-div2";
+
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * Bootloader initialized system infrastructure clock for
+		 * serial devices.
+		 */
+		clk_ext2f_a9: clockgen-c0@13 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			clock-output-names = "clk-s-icn-reg-0";
+		};
+
+		clockgen-a@090ff000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x90ff000 0x1000>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll-ofd-0";
+				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
+			};
+
+			clk_s_a0_flexgen: clk-s-a0-flexgen {
+				compatible = "st,flexgen";
+
+				#clock-cells = <1>;
+
+				clocks = <&clk_s_a0_pll 0>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-ic-lmi0",
+						     "clk-ic-lmi1";
+				clock-critical = <CLK_IC_LMI0>;
+			};
+		};
+
+		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs-pll";
+			reg = <0x9103000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-c0-fs0-ch0",
+					     "clk-s-c0-fs0-ch1",
+					     "clk-s-c0-fs0-ch2",
+					     "clk-s-c0-fs0-ch3";
+			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
+		};
+
+		clk_s_c0: clockgen-c@09103000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9103000 0x1000>;
+
+			clk_s_c0_pll0: clk-s-c0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll0-odf-0";
+				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
+			};
+
+			clk_s_c0_pll1: clk-s-c0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll1";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll1-odf-0";
+			};
+
+			clk_s_c0_flexgen: clk-s-c0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_c0_pll0 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_quadfs 0>,
+					 <&clk_s_c0_quadfs 1>,
+					 <&clk_s_c0_quadfs 2>,
+					 <&clk_s_c0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-icn-gpu",
+						     "clk-fdma",
+						     "clk-nand",
+						     "clk-hva",
+						     "clk-proc-stfe",
+						     "clk-proc-tp",
+						     "clk-rx-icn-dmu",
+						     "clk-rx-icn-hva",
+						     "clk-icn-cpu",
+						     "clk-tx-icn-dmu",
+						     "clk-mmc-0",
+						     "clk-mmc-1",
+						     "clk-jpegdec",
+						     "clk-ext2fa9",
+						     "clk-ic-bdisp-0",
+						     "clk-ic-bdisp-1",
+						     "clk-pp-dmu",
+						     "clk-vid-dmu",
+						     "clk-dss-lpc",
+						     "clk-st231-aud-0",
+						     "clk-st231-gp-1",
+						     "clk-st231-dmu",
+						     "clk-icn-lmi",
+						     "clk-tx-icn-disp-1",
+						     "clk-icn-sbc",
+						     "clk-stfe-frc2",
+						     "clk-eth-phy",
+						     "clk-eth-ref-phyclk",
+						     "clk-flash-promip",
+						     "clk-main-disp",
+						     "clk-aux-disp",
+						     "clk-compo-dvp",
+						     "clk-tx-icn-hades",
+						     "clk-rx-icn-hades",
+						     "clk-icn-reg-16",
+						     "clk-pp-hades",
+						     "clk-clust-hades",
+						     "clk-hwpe-hades",
+						     "clk-fc-hades";
+				clock-critical = <CLK_ICN_CPU>,
+						 <CLK_TX_ICN_DMU>,
+						 <CLK_EXT2F_A9>,
+						 <CLK_ICN_LMI>,
+						 <CLK_ICN_SBC>;
+			};
+		};
+
+		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9104000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d0-fs0-ch0",
+					     "clk-s-d0-fs0-ch1",
+					     "clk-s-d0-fs0-ch2",
+					     "clk-s-d0-fs0-ch3";
+		};
+
+		clockgen-d0@09104000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9104000 0x1000>;
+
+			clk_s_d0_flexgen: clk-s-d0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-audio", "st,flexgen";
+
+				clocks = <&clk_s_d0_quadfs 0>,
+					 <&clk_s_d0_quadfs 1>,
+					 <&clk_s_d0_quadfs 2>,
+					 <&clk_s_d0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-pcm-0",
+						     "clk-pcm-1",
+						     "clk-pcm-2",
+						     "clk-spdiff",
+						     "clk-pcmr10-master",
+						     "clk-usb2-phy";
+			};
+		};
+
+		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9106000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d2-fs0-ch0",
+					     "clk-s-d2-fs0-ch1",
+					     "clk-s-d2-fs0-ch2",
+					     "clk-s-d2-fs0-ch3";
+		};
+
+		clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clockgen-d2@x9106000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9106000 0x1000>;
+
+			clk_s_d2_flexgen: clk-s-d2-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-video", "st,flexgen";
+
+				clocks = <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 2>,
+					 <&clk_s_d2_quadfs 3>,
+					 <&clk_sysin>,
+					 <&clk_sysin>,
+					 <&clk_tmdsout_hdmi>;
+
+				clock-output-names = "clk-pix-main-disp",
+						     "clk-pix-pip",
+						     "clk-pix-gdp1",
+						     "clk-pix-gdp2",
+						     "clk-pix-gdp3",
+						     "clk-pix-gdp4",
+						     "clk-pix-aux-disp",
+						     "clk-denc",
+						     "clk-pix-hddac",
+						     "clk-hddac",
+						     "clk-sddac",
+						     "clk-pix-dvo",
+						     "clk-dvo",
+						     "clk-pix-hdmi",
+						     "clk-tmds-hdmi",
+						     "clk-ref-hdmiphy";
+						     };
+		};
+
+		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9107000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d3-fs0-ch0",
+					     "clk-s-d3-fs0-ch1",
+					     "clk-s-d3-fs0-ch2",
+					     "clk-s-d3-fs0-ch3";
+		};
+
+		clockgen-d3@9107000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9107000 0x1000>;
+
+			clk_s_d3_flexgen: clk-s-d3-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d3_quadfs 0>,
+					 <&clk_s_d3_quadfs 1>,
+					 <&clk_s_d3_quadfs 2>,
+					 <&clk_s_d3_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-stfe-frc1",
+						     "clk-tsout-0",
+						     "clk-tsout-1",
+						     "clk-mchi",
+						     "clk-vsens-compo",
+						     "clk-frc1-remote",
+						     "clk-lpc-0",
+						     "clk-lpc-1";
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/stih410-pinctrl.dtsi b/arch/arm/dts/stih410-pinctrl.dtsi
new file mode 100644
index 00000000000..b3e9dfc81c0
--- /dev/null
+++ b/arch/arm/dts/stih410-pinctrl.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+/ {
+
+	soc {
+		pin-controller-rear {
+
+			usb0 {
+				pinctrl_usb0: usb2-0 {
+					st,pins {
+						usb-oc-detect = <&pio35 0 ALT1 IN>;
+						usb-pwr-enable = <&pio35 1 ALT1 OUT>;
+					};
+				};
+			};
+
+			usb1 {
+				pinctrl_usb1: usb2-1 {
+					st,pins {
+						usb-oc-detect = <&pio35 2 ALT1 IN>;
+						usb-pwr-enable = <&pio35 3 ALT1 OUT>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/stih410.dtsi b/arch/arm/dts/stih410.dtsi
new file mode 100644
index 00000000000..f118a9e51c4
--- /dev/null
+++ b/arch/arm/dts/stih410.dtsi
@@ -0,0 +1,454 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih410-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stih410-pinctrl.dtsi"
+/ {
+	aliases {
+		bdisp0 = &bdisp0;
+	};
+
+	cpus {
+		cpu@0 {
+			st,syscfg = <&syscfg_core 0x8e0>;
+			st,syscfg-eng = <&syscfg_opp 0x4 0x0>;
+			clocks = <&clk_m_a9>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+		cpu@1 {
+			clocks = <&clk_m_a9>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@1500000000 {
+			opp-supported-hw = <0xffffffff  0xffffffff  0xffffffff>;
+			opp-hz = /bits/ 64 <1500000000>;
+			clock-latency-ns = <10000000>;
+			opp-suspend;
+		};
+		opp@1200000000 {
+			opp-supported-hw = <0xffffffff  0xffffffff  0xffffffff>;
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <10000000>;
+		};
+		opp@800000000 {
+			opp-supported-hw = <0xffffffff  0xffffffff  0xffffffff>;
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <10000000>;
+		};
+		opp@400000000 {
+			opp-supported-hw = <0xffffffff  0xffffffff  0xffffffff>;
+			opp-hz = /bits/ 64 <400000000>;
+			clock-latency-ns = <10000000>;
+		};
+	};
+
+	soc {
+		syscfg_opp: @08a6583c {
+			compatible = "syscon";
+			reg = <0x08a6583c 0x8>;
+		};
+
+		usb2_picophy1: phy2 {
+			compatible = "st,stih407-usb2-phy";
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0xf8 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY0_RESET>;
+			reset-names = "global", "port";
+
+			status = "disabled";
+		};
+
+		usb2_picophy2: phy3 {
+			compatible = "st,stih407-usb2-phy";
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0xfc 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY1_RESET>;
+			reset-names = "global", "port";
+
+			status = "disabled";
+		};
+
+		ohci0: usb@9a03c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a03c00 0x100>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ehci0: usb@9a03e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a03e00 0x100>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ohci1: usb@9a83c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a83c00 0x100>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy2>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ehci1: usb@9a83e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a83e00 0x100>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy2>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		sti-display-subsystem {
+			compatible = "st,sti-display-subsystem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 1>,
+					  <&clk_s_c0_pll1 0>,
+					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP4>;
+
+			assigned-clock-parents = <0>,
+						 <0>,
+						 <0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>;
+
+			assigned-clock-rates = <297000000>,
+					       <297000000>,
+					       <0>,
+					       <400000000>,
+					       <400000000>;
+
+			ranges;
+
+			sti-compositor@9d11000 {
+				compatible = "st,stih407-compositor";
+				reg = <0x9d11000 0x1000>;
+
+				clock-names = "compo_main",
+					      "compo_aux",
+					      "pix_main",
+					      "pix_aux",
+					      "pix_gdp1",
+					      "pix_gdp2",
+					      "pix_gdp3",
+					      "pix_gdp4",
+					      "main_parent",
+					      "aux_parent";
+
+				clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP4>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+
+				reset-names = "compo-main", "compo-aux";
+				resets = <&softreset STIH407_COMPO_SOFTRESET>,
+					 <&softreset STIH407_COMPO_SOFTRESET>;
+				st,vtg = <&vtg_main>, <&vtg_aux>;
+			};
+
+			sti-tvout@8d08000 {
+				compatible = "st,stih407-tvout";
+				reg = <0x8d08000 0x1000>;
+				reg-names = "tvout-reg";
+				reset-names = "tvout";
+				resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+						  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+						  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+						  <&clk_s_d0_flexgen CLK_PCM_0>,
+						  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+						  <&clk_s_d2_flexgen CLK_HDDAC>;
+
+				assigned-clock-parents = <&clk_s_d2_quadfs 0>,
+							 <&clk_tmdsout_hdmi>,
+							 <&clk_s_d2_quadfs 0>,
+							 <&clk_s_d0_quadfs 0>,
+							 <&clk_s_d2_quadfs 0>,
+							 <&clk_s_d2_quadfs 0>;
+			};
+
+			sti_hdmi: sti-hdmi@8d04000 {
+				compatible = "st,stih407-hdmi";
+				#sound-dai-cells = <0>;
+				reg = <0x8d04000 0x1000>;
+				reg-names = "hdmi-reg";
+				interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+				interrupt-names	= "irq";
+				clock-names = "pix",
+					      "tmds",
+					      "phy",
+					      "audio",
+					      "main_parent",
+					      "aux_parent";
+
+				clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+					 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+					 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+					 <&clk_s_d0_flexgen CLK_PCM_0>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+
+				hdmi,hpd-gpio = <&pio5 3>;
+				reset-names = "hdmi";
+				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+				ddc = <&hdmiddc>;
+			};
+
+			sti-hda@8d02000 {
+				compatible = "st,stih407-hda";
+				status = "disabled";
+				reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+				reg-names = "hda-reg", "video-dacs-ctrl";
+				clock-names = "pix",
+					      "hddac",
+					      "main_parent",
+					      "aux_parent";
+				clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+					 <&clk_s_d2_flexgen CLK_HDDAC>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+			};
+
+			sti-dvo@8d00400 {
+				compatible = "st,stih407-dvo";
+				status = "disabled";
+				reg = <0x8d00400 0x200>;
+				reg-names = "dvo-reg";
+				clock-names = "dvo_pix",
+					      "dvo",
+					      "main_parent",
+					      "aux_parent";
+				clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>,
+					 <&clk_s_d2_flexgen CLK_DVO>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dvo>;
+			};
+
+			sti-hqvdp@9c000000 {
+				compatible = "st,stih407-hqvdp";
+				reg = <0x9C00000 0x100000>;
+				clock-names = "hqvdp", "pix_main";
+				clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
+				reset-names = "hqvdp";
+				resets = <&softreset STIH407_HDQVDP_SOFTRESET>;
+				st,vtg = <&vtg_main>;
+			};
+		};
+
+		bdisp0:bdisp@9f10000 {
+			compatible = "st,stih407-bdisp";
+			reg = <0x9f10000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
+			clock-names = "bdisp";
+			clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
+		};
+
+		hva@8c85000 {
+			compatible = "st,st-hva";
+			reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
+			reg-names = "hva_registers", "hva_esram";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
+				     <GIC_SPI 59 IRQ_TYPE_NONE>;
+			clock-names = "clk_hva";
+			clocks = <&clk_s_c0_flexgen CLK_HVA>;
+		};
+
+		thermal@91a0000 {
+			compatible = "st,stih407-thermal";
+			reg = <0x91a0000 0x28>;
+			clock-names = "thermal";
+			clocks = <&clk_sysin>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		g1@8c80000 {
+			compatible = "st,g1";
+			reg = <0x8c80000 0x194>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
+		};
+
+		temp0{
+			compatible = "st,stih407-thermal";
+			reg = <0x91a0000 0x28>;
+			clock-names = "thermal";
+			clocks = <&clk_sysin>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		delta0 {
+			compatible = "st,delta";
+			clock-names = "delta", "delta-st231", "delta-flash-promip";
+			clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+			    <&clk_s_c0_flexgen CLK_ST231_DMU>,
+			    <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+		};
+
+		h264pp0: h264pp@8c00000 {
+			compatible = "st,h264pp";
+			reg = <0x8c00000 0x20000>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>;
+			clock-names = "clk_h264pp_0";
+			clocks = <&clk_s_c0_flexgen CLK_PP_DMU>;
+		};
+
+		mali: mali@09f00000 {
+			compatible	= "arm,mali-400";
+			reg		= <0x09f00000 0x10000>;
+			interrupts	= <GIC_SPI 49 IRQ_TYPE_NONE>,
+					  <GIC_SPI 50 IRQ_TYPE_NONE>,
+					  <GIC_SPI 41 IRQ_TYPE_NONE>,
+					  <GIC_SPI 45 IRQ_TYPE_NONE>,
+					  <GIC_SPI 42 IRQ_TYPE_NONE>,
+					  <GIC_SPI 46 IRQ_TYPE_NONE>,
+					  <GIC_SPI 43 IRQ_TYPE_NONE>,
+					  <GIC_SPI 47 IRQ_TYPE_NONE>,
+					  <GIC_SPI 44 IRQ_TYPE_NONE>,
+					  <GIC_SPI 48 IRQ_TYPE_NONE>;
+			interrupt-names = "IRQGP",
+					  "IRQGPMMU",
+					  "IRQPP0",
+					  "IRQPPMMU0",
+					  "IRQPP1",
+					  "IRQPPMMU1",
+					  "IRQPP2",
+					  "IRQPPMMU2",
+					  "IRQPP3",
+					  "IRQPPMMU3";
+			clock-names	= "gpu-clk";
+			clocks		= <&clk_s_c0_flexgen CLK_ICN_GPU>;
+			reset-names	= "gpu";
+			resets		= <&softreset STIH407_GPU_SOFTRESET>;
+		};
+
+		delta0 {
+			compatible = "st,st-delta";
+			clock-names = "delta",
+				      "delta-st231",
+				      "delta-flash-promip";
+			clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+				 <&clk_s_c0_flexgen CLK_ST231_DMU>,
+				 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+		};
+
+		h264pp0: h264pp@8c00000 {
+			compatible = "st,h264pp";
+			reg = <0x8c00000 0x20000>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>;
+			clock-names = "clk_h264pp_0";
+			clocks = <&clk_s_c0_flexgen CLK_PP_DMU>;
+		};
+
+		mali: mali@09f00000 {
+			compatible	= "arm,mali-400";
+			reg		= <0x09f00000 0x10000>;
+			interrupts	= <GIC_SPI 49 IRQ_TYPE_NONE>,
+					  <GIC_SPI 50 IRQ_TYPE_NONE>,
+					  <GIC_SPI 41 IRQ_TYPE_NONE>,
+					  <GIC_SPI 45 IRQ_TYPE_NONE>,
+					  <GIC_SPI 42 IRQ_TYPE_NONE>,
+					  <GIC_SPI 46 IRQ_TYPE_NONE>,
+					  <GIC_SPI 43 IRQ_TYPE_NONE>,
+					  <GIC_SPI 47 IRQ_TYPE_NONE>,
+					  <GIC_SPI 44 IRQ_TYPE_NONE>,
+					  <GIC_SPI 48 IRQ_TYPE_NONE>;
+			interrupt-names = "IRQGP",
+					  "IRQGPMMU",
+					  "IRQPP0",
+					  "IRQPPMMU0",
+					  "IRQPP1",
+					  "IRQPPMMU1",
+					  "IRQPP2",
+					  "IRQPPMMU2",
+					  "IRQPP3",
+					  "IRQPPMMU3";
+			clock-names	= "gpu-clk";
+			clocks		= <&clk_s_c0_flexgen CLK_ICN_GPU>;
+			reset-names	= "gpu";
+			resets		= <&softreset STIH407_GPU_SOFTRESET>;
+		};
+
+		hva@8c85000{
+			compatible = "st,st-hva";
+			reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
+			reg-names = "hva_registers", "hva_esram";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
+				     <GIC_SPI 59 IRQ_TYPE_NONE>;
+			clock-names = "clk_hva";
+			clocks = <&clk_s_c0_flexgen CLK_HVA>;
+		};
+	};
+};
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index ea5ea087f37..ddef59a3c01 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -301,7 +301,7 @@ config MMC_SDHCI_SPEAR
 
 config MMC_SDHCI_STI
 	bool "SDHCI support for STMicroelectronics SoC"
-	depends on MMC_SDHCI
+	depends on MMC_SDHCI && OF_CONTROL
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  on STMicroelectronics STiH410 SoC.
diff --git a/include/dt-bindings/clock/stih407-clks.h b/include/dt-bindings/clock/stih407-clks.h
new file mode 100644
index 00000000000..082edd9badf
--- /dev/null
+++ b/include/dt-bindings/clock/stih407-clks.h
@@ -0,0 +1,90 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH407 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH407
+#define _DT_BINDINGS_CLK_STIH407
+
+/* CLOCKGEN A0 */
+#define CLK_IC_LMI0		0
+#define CLK_IC_LMI1		1
+
+/* CLOCKGEN C0 */
+#define CLK_ICN_GPU		0
+#define CLK_FDMA		1
+#define CLK_NAND		2
+#define CLK_HVA			3
+#define CLK_PROC_STFE		4
+#define CLK_PROC_TP		5
+#define CLK_RX_ICN_DMU		6
+#define CLK_RX_ICN_DISP_0	6
+#define CLK_RX_ICN_DISP_1	6
+#define CLK_RX_ICN_HVA		7
+#define CLK_RX_ICN_TS		7
+#define CLK_ICN_CPU		8
+#define CLK_TX_ICN_DMU		9
+#define CLK_TX_ICN_HVA		9
+#define CLK_TX_ICN_TS		9
+#define CLK_ICN_COMPO		9
+#define CLK_MMC_0		10
+#define CLK_MMC_1		11
+#define CLK_JPEGDEC		12
+#define CLK_ICN_REG		13
+#define CLK_TRACE_A9		13
+#define CLK_PTI_STM		13
+#define CLK_EXT2F_A9		13
+#define CLK_IC_BDISP_0		14
+#define CLK_IC_BDISP_1		15
+#define CLK_PP_DMU		16
+#define CLK_VID_DMU		17
+#define CLK_DSS_LPC		18
+#define CLK_ST231_AUD_0		19
+#define CLK_ST231_GP_0		19
+#define CLK_ST231_GP_1		20
+#define CLK_ST231_DMU		21
+#define CLK_ICN_LMI		22
+#define CLK_TX_ICN_DISP_0	23
+#define CLK_TX_ICN_DISP_1	23
+#define CLK_ICN_SBC		24
+#define CLK_STFE_FRC2		25
+#define CLK_ETH_PHY		26
+#define CLK_ETH_REF_PHYCLK	27
+#define CLK_FLASH_PROMIP	28
+#define CLK_MAIN_DISP		29
+#define CLK_AUX_DISP		30
+#define CLK_COMPO_DVP		31
+
+/* CLOCKGEN D0 */
+#define CLK_PCM_0		0
+#define CLK_PCM_1		1
+#define CLK_PCM_2		2
+#define CLK_SPDIFF		3
+
+/* CLOCKGEN D2 */
+#define CLK_PIX_MAIN_DISP	0
+#define CLK_PIX_PIP		1
+#define CLK_PIX_GDP1		2
+#define CLK_PIX_GDP2		3
+#define CLK_PIX_GDP3		4
+#define CLK_PIX_GDP4		5
+#define CLK_PIX_AUX_DISP	6
+#define CLK_DENC		7
+#define CLK_PIX_HDDAC		8
+#define CLK_HDDAC		9
+#define CLK_SDDAC		10
+#define CLK_PIX_DVO		11
+#define CLK_DVO			12
+#define CLK_PIX_HDMI		13
+#define CLK_TMDS_HDMI		14
+#define CLK_REF_HDMIPHY		15
+
+/* CLOCKGEN D3 */
+#define CLK_STFE_FRC1		0
+#define CLK_TSOUT_0		1
+#define CLK_TSOUT_1		2
+#define CLK_MCHI		3
+#define CLK_VSENS_COMPO		4
+#define CLK_FRC1_REMOTE		5
+#define CLK_LPC_0		6
+#define CLK_LPC_1		7
+#endif
diff --git a/include/dt-bindings/clock/stih410-clks.h b/include/dt-bindings/clock/stih410-clks.h
new file mode 100644
index 00000000000..2097a4bbe15
--- /dev/null
+++ b/include/dt-bindings/clock/stih410-clks.h
@@ -0,0 +1,25 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH410 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH410
+#define _DT_BINDINGS_CLK_STIH410
+
+#include "stih407-clks.h"
+
+/* STiH410 introduces new clock outputs compared to STiH407 */
+
+/* CLOCKGEN C0 */
+#define CLK_TX_ICN_HADES	32
+#define CLK_RX_ICN_HADES	33
+#define CLK_ICN_REG_16		34
+#define CLK_PP_HADES		35
+#define CLK_CLUST_HADES		36
+#define CLK_HWPE_HADES		37
+#define CLK_FC_HADES		38
+
+/* CLOCKGEN D0 */
+#define CLK_PCMR10_MASTER	4
+#define CLK_USB2_PHY		5
+
+#endif
diff --git a/include/dt-bindings/interrupt-controller/irq-st.h b/include/dt-bindings/interrupt-controller/irq-st.h
new file mode 100644
index 00000000000..6baa9ad2644
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/irq-st.h
@@ -0,0 +1,30 @@
+/*
+ *  include/linux/irqchip/irq-st.h
+ *
+ *  Copyright (C) 2014 STMicroelectronics All Rights Reserved
+ *
+ *  Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H
+
+#define ST_IRQ_SYSCFG_EXT_0		0
+#define ST_IRQ_SYSCFG_EXT_1		1
+#define ST_IRQ_SYSCFG_EXT_2		2
+#define ST_IRQ_SYSCFG_CTI_0		3
+#define ST_IRQ_SYSCFG_CTI_1		4
+#define ST_IRQ_SYSCFG_PMU_0		5
+#define ST_IRQ_SYSCFG_PMU_1		6
+#define ST_IRQ_SYSCFG_pl310_L2		7
+#define ST_IRQ_SYSCFG_DISABLED		0xFFFFFFFF
+
+#define ST_IRQ_SYSCFG_EXT_1_INV		0x1
+#define ST_IRQ_SYSCFG_EXT_2_INV		0x2
+#define ST_IRQ_SYSCFG_EXT_3_INV		0x4
+
+#endif
diff --git a/include/dt-bindings/mfd/st-lpc.h b/include/dt-bindings/mfd/st-lpc.h
new file mode 100644
index 00000000000..d05894afa7e
--- /dev/null
+++ b/include/dt-bindings/mfd/st-lpc.h
@@ -0,0 +1,16 @@
+/*
+ * This header provides shared DT/Driver defines for ST's LPC device
+ *
+ * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
+ *
+ * Author: Lee Jones <lee.jones@linaro.org> for STMicroelectronics
+ */
+
+#ifndef __DT_BINDINGS_ST_LPC_H__
+#define __DT_BINDINGS_ST_LPC_H__
+
+#define ST_LPC_MODE_RTC		0
+#define ST_LPC_MODE_WDT		1
+#define ST_LPC_MODE_CLKSRC	2
+
+#endif /* __DT_BINDINGS_ST_LPC_H__ */
diff --git a/include/dt-bindings/reset/stih407-resets.h b/include/dt-bindings/reset/stih407-resets.h
new file mode 100644
index 00000000000..4ab3a1c9495
--- /dev/null
+++ b/include/dt-bindings/reset/stih407-resets.h
@@ -0,0 +1,65 @@
+/*
+ * This header provides constants for the reset controller
+ * based peripheral powerdown requests on the STMicroelectronics
+ * STiH407 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH407
+#define _DT_BINDINGS_RESET_CONTROLLER_STIH407
+
+/* Powerdown requests control 0 */
+#define STIH407_EMISS_POWERDOWN		0
+#define STIH407_NAND_POWERDOWN		1
+
+/* Synp GMAC PowerDown */
+#define STIH407_ETH1_POWERDOWN		2
+
+/* Powerdown requests control 1 */
+#define STIH407_USB3_POWERDOWN		3
+#define STIH407_USB2_PORT1_POWERDOWN	4
+#define STIH407_USB2_PORT0_POWERDOWN	5
+#define STIH407_PCIE1_POWERDOWN		6
+#define STIH407_PCIE0_POWERDOWN		7
+#define STIH407_SATA1_POWERDOWN		8
+#define STIH407_SATA0_POWERDOWN		9
+
+/* Reset defines */
+#define STIH407_ETH1_SOFTRESET		0
+#define STIH407_MMC1_SOFTRESET		1
+#define STIH407_PICOPHY_SOFTRESET	2
+#define STIH407_IRB_SOFTRESET		3
+#define STIH407_PCIE0_SOFTRESET		4
+#define STIH407_PCIE1_SOFTRESET		5
+#define STIH407_SATA0_SOFTRESET		6
+#define STIH407_SATA1_SOFTRESET		7
+#define STIH407_MIPHY0_SOFTRESET	8
+#define STIH407_MIPHY1_SOFTRESET	9
+#define STIH407_MIPHY2_SOFTRESET	10
+#define STIH407_SATA0_PWR_SOFTRESET	11
+#define STIH407_SATA1_PWR_SOFTRESET	12
+#define STIH407_DELTA_SOFTRESET		13
+#define STIH407_BLITTER_SOFTRESET	14
+#define STIH407_HDTVOUT_SOFTRESET	15
+#define STIH407_HDQVDP_SOFTRESET	16
+#define STIH407_VDP_AUX_SOFTRESET	17
+#define STIH407_COMPO_SOFTRESET		18
+#define STIH407_HDMI_TX_PHY_SOFTRESET	19
+#define STIH407_JPEG_DEC_SOFTRESET	20
+#define STIH407_VP8_DEC_SOFTRESET	21
+#define STIH407_GPU_SOFTRESET		22
+#define STIH407_HVA_SOFTRESET		23
+#define STIH407_ERAM_HVA_SOFTRESET	24
+#define STIH407_LPM_SOFTRESET		25
+#define STIH407_KEYSCAN_SOFTRESET	26
+#define STIH407_USB2_PORT0_SOFTRESET	27
+#define STIH407_USB2_PORT1_SOFTRESET	28
+#define STIH407_ST231_AUD_SOFTRESET	29
+#define STIH407_ST231_DMU_SOFTRESET	30
+#define STIH407_ST231_GP0_SOFTRESET	31
+#define STIH407_ST231_GP1_SOFTRESET	32
+
+/* Picophy reset defines */
+#define STIH407_PICOPHY0_RESET		0
+#define STIH407_PICOPHY1_RESET		1
+#define STIH407_PICOPHY2_RESET		2
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH407 */