kgdb: Remove unused serial related options

We have a few CONFIG options for KGDB that are not referenced, remove
them.

Signed-off-by: Tom Rini <trini@konsulko.com>

17 files changed, 0 insertions, 74 deletions

diff --git a/README b/README
index 28eb920359..9a81de300b 100644
--- a/README
+++ b/README
@@ -647,11 +647,6 @@ The following options need to be configured:
 		time on others. This setting #define's the initial
 		value of the "loads_echo" environment variable.
 
-- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined)
-		CONFIG_KGDB_BAUDRATE
-		Select one of the baudrates listed in
-		CONFIG_SYS_BAUDRATE_TABLE, see below.
-
 - Removal of commands
 		If no commands are needed to boot, you can disable
 		CONFIG_CMDLINE to remove them. In this case, the command line
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 26c6180d3a..72119a1cf0 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -321,10 +321,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(256 << 20) /* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index fc9d94984e..fe156e7815 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -288,10 +288,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index f7d05ffa89..5c54bad496 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -415,10 +415,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index e1e0717991..3a9ea03292 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -278,10 +278,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 02b0b71ada..922f0661ab 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -619,10 +619,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20) /* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
 
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 6da44e7ab8..1e75066eb1 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -466,10 +466,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory for Linux */
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 3ae8a14c94..e4629946dd 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -584,10 +584,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 910baef00c..7c48c3af71 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -592,10 +592,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Dynamic MTD Partition support with mtdparts
  */
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 315d1f7b01..57640acfc9 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -585,11 +585,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 6824be9e75..6f27386d2b 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -540,11 +540,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 54db021ec9..b7cbf87d30 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -214,10 +214,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 01f4dba9e9..79fca968dc 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -466,10 +466,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 49dbbf07f8..5833611056 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -597,10 +597,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
 
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/pxa-common.h b/include/configs/pxa-common.h
index 52d77e06ac..7a78f98eb1 100644
--- a/include/configs/pxa-common.h
+++ b/include/configs/pxa-common.h
@@ -9,13 +9,6 @@
 #define	__CONFIG_PXA_COMMON_H__
 
 /*
- * KGDB
- */
-#ifdef	CONFIG_CMD_KGDB
-#define	CONFIG_KGDB_BAUDRATE		230400
-#endif
-
-/*
  * OHCI USB
  */
 #ifdef	CONFIG_CMD_USB
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 4fd119ce85..454dbd30b6 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -203,10 +203,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
 
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
-#endif
-
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index 4b39faabab..486b5ca776 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -44,10 +44,6 @@
 	"ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000"
 #endif
 
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE			115200
-#endif
-
 /*
  * Miscellaneous configurable options
  */