diff options
| author | Tom Rini <trini@konsulko.com> | 2017-04-18 11:36:06 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2017-04-18 11:36:06 -0400 |
| commit | 3c476d841daa491f87c8f07851038afbdf4d90a8 (patch) | |
| tree | 131891877d7b9b112ebc8c05ab88d53b9b18b702 | |
| parent | 9481f186d0bb06e492f62144cacdb5a8367e3cd2 (diff) | |
| parent | e0dfec863e2ca5088dd797a5b6853d4c0df9002c (diff) | |
Merge git://git.denx.de/u-boot-fsl-qoriq
82 files changed, 740 insertions, 172 deletions
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 3a9913a86bc..5fac252c0e0 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -12,7 +12,7 @@ obj-y += cache_v7.o cache_v7_asm.o obj-y += cpu.o cp15.o obj-y += syslib.o -ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_ARCH_SUNXI)$(CONFIG_ARCH_SOCFPGA)$(CONFIG_ARCH_MX7ULP)$(CONFIG_LS102XA),) +ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_ARCH_SUNXI)$(CONFIG_ARCH_SOCFPGA)$(CONFIG_ARCH_MX7ULP)$(CONFIG_ARCH_LS1021A),) ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y) obj-y += lowlevel_init.o endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index b24462bede9..12fd80e7dbf 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -36,6 +36,7 @@ config ARCH_LS1046A select SYS_FSL_DDR_VER_50 select SYS_FSL_ERRATUM_A008336 select SYS_FSL_ERRATUM_A008511 + select SYS_FSL_ERRATUM_A008850 select SYS_FSL_ERRATUM_A009801 select SYS_FSL_ERRATUM_A009803 select SYS_FSL_ERRATUM_A009942 @@ -63,6 +64,8 @@ config ARCH_LS2080A select SYS_FSL_SEC_COMPAT_5 select SYS_FSL_SEC_LE select SYS_FSL_SRDS_2 + select FSL_TZASC_1 + select FSL_TZASC_2 select SYS_FSL_ERRATUM_A008336 select SYS_FSL_ERRATUM_A008511 select SYS_FSL_ERRATUM_A008514 @@ -171,6 +174,20 @@ config SYS_LS_PPA_FW_ADDR QSPI flash, this address is a directly memory-mapped. If it is in a serial accessed flash, such as NAND and SD card, it is a byte offset. + +config SYS_LS_PPA_ESBC_ADDR + hex "hdr address of PPA firmware loading from" + depends on FSL_LS_PPA && CHAIN_OF_TRUST + default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A + default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A + default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A + default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3 + help + If the PPA header firmware locate at XIP flash, such as NOR or + QSPI flash, this address is a directly memory-mapped. + If it is in a serial accessed flash, such as NAND and SD + card, it is a byte offset. + endmenu config SYS_FSL_ERRATUM_A010315 @@ -223,6 +240,12 @@ config SYS_FSL_SRDS_2 config SYS_HAS_SERDES bool +config FSL_TZASC_1 + bool + +config FSL_TZASC_2 + bool + endmenu menu "Layerscape clock tree configuration" diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index c9ab93e3d7c..e3ce0184d89 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -22,11 +22,11 @@ obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch2_serdes.o endif endif -ifneq ($(CONFIG_LS2080A),) +ifneq ($(CONFIG_ARCH_LS2080A),) obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o endif -ifneq ($(CONFIG_LS1043A),) +ifneq ($(CONFIG_ARCH_LS1043A),) obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o obj-$(CONFIG_ARMV8_PSCI) += ls1043a_psci.o endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index d446527616c..c24f3f173c0 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -92,7 +92,7 @@ static inline void early_mmu_setup(void) static void fix_pcie_mmu_map(void) { -#ifdef CONFIG_LS2080A +#ifdef CONFIG_ARCH_LS2080A unsigned int i; u32 svr, ver; struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); @@ -523,7 +523,7 @@ int timer_init(void) #ifdef CONFIG_FSL_LSCH3 u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR; #endif -#ifdef CONFIG_LS2080A +#ifdef CONFIG_ARCH_LS2080A u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET; u32 svr_dev_id; #endif @@ -541,7 +541,7 @@ int timer_init(void) out_le32(cltbenr, 0xf); #endif -#ifdef CONFIG_LS2080A +#ifdef CONFIG_ARCH_LS2080A /* * In certain Layerscape SoCs, the clock for each core's * has an enable bit in the PMU Physical Core Time Base Enable diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c index 762a95b945c..05c4577753a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c @@ -373,8 +373,8 @@ void ft_cpu_setup(void *blob, bd_t *bd) "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); #endif - do_fixup_by_compat_u32(blob, "fixed-clock", - "clock-frequency", CONFIG_SYS_CLK_FREQ, 1); + do_fixup_by_path_u32(blob, "/sysclk", "clock-frequency", + CONFIG_SYS_CLK_FREQ, 1); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S index a2185f2def2..f4273561040 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S @@ -76,7 +76,7 @@ ENTRY(lowlevel_init) #ifdef CONFIG_FSL_LSCH3 /* Set Wuo bit for RN-I 20 */ -#ifdef CONFIG_LS2080A +#ifdef CONFIG_ARCH_LS2080A ldr x0, =CCI_AUX_CONTROL_BASE(20) ldr x1, =0x00000010 bl ccn504_set_aux @@ -229,38 +229,40 @@ ENTRY(lowlevel_init) * NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just * placeholders. */ +#ifdef CONFIG_FSL_TZASC_1 ldr x1, =TZASC_GATE_KEEPER(0) ldr w0, [x1] /* Filter 0 Gate Keeper Register */ orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */ str w0, [x1] - ldr x1, =TZASC_GATE_KEEPER(1) - ldr w0, [x1] /* Filter 0 Gate Keeper Register */ - orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */ - str w0, [x1] - ldr x1, =TZASC_REGION_ATTRIBUTES_0(0) ldr w0, [x1] /* Region-0 Attributes Register */ orr w0, w0, #1 << 31 /* Set Sec global write en, Bit[31] */ orr w0, w0, #1 << 30 /* Set Sec global read en, Bit[30] */ str w0, [x1] + ldr x1, =TZASC_REGION_ID_ACCESS_0(0) + ldr w0, [x1] /* Region-0 Access Register */ + mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */ + str w0, [x1] +#endif +#ifdef CONFIG_FSL_TZASC_2 + ldr x1, =TZASC_GATE_KEEPER(1) + ldr w0, [x1] /* Filter 0 Gate Keeper Register */ + orr w0, w0, #1 << 0 /* Set open_request for Filter 0 */ + str w0, [x1] + ldr x1, =TZASC_REGION_ATTRIBUTES_0(1) ldr w0, [x1] /* Region-1 Attributes Register */ orr w0, w0, #1 << 31 /* Set Sec global write en, Bit[31] */ orr w0, w0, #1 << 30 /* Set Sec global read en, Bit[30] */ str w0, [x1] - ldr x1, =TZASC_REGION_ID_ACCESS_0(0) - ldr w0, [x1] /* Region-0 Access Register */ - mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */ - str w0, [x1] - ldr x1, =TZASC_REGION_ID_ACCESS_0(1) ldr w0, [x1] /* Region-1 Attributes Register */ mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */ str w0, [x1] - +#endif isb dsb sy #endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c index ab83e85adcd..4db3c76d729 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c @@ -70,6 +70,7 @@ static struct serdes_config serdes2_cfg_tbl[] = { SATA2 } }, {0x4A, {SGMII9, SGMII10, SGMII11, SGMII12, PCIE4, PCIE4, SATA1, SATA2 } }, + {0x51, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4 } }, {0x57, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SGMII15, SGMII16 } }, {} }; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c index b35ad5fb6f0..7f87bb86897 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c @@ -178,7 +178,7 @@ int ppa_init(void) ppa_img_addr = (uintptr_t)ppa_fit_addr; if (fsl_check_boot_mode_secure() != 0) { ret = fsl_secboot_validate(ppa_esbc_hdr, - CONFIG_PPA_KEY_HASH, + PPA_KEY_HASH, &ppa_img_addr); if (ret != 0) printf("PPA validation failed\n"); diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index 73a86807417..eb730e84a46 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -41,13 +41,31 @@ u32 spl_boot_mode(const u32 boot_device) } #ifdef CONFIG_SPL_BUILD + +void spl_board_init(void) +{ +#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_LSCH2) + /* + * In case of Secure Boot, the IBR configures the SMMU + * to allow only Secure transactions. + * SMMU must be reset in bypass mode. + * Set the ClientPD bit and Clear the USFCFG Bit + */ + u32 val; + val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_SCR0, val); + val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_NSCR0, val); +#endif +} + void board_init_f(ulong dummy) { /* Clear global data */ memset((void *)gd, 0, sizeof(gd_t)); board_early_init_f(); timer_init(); -#ifdef CONFIG_LS2080A +#ifdef CONFIG_ARCH_LS2080A env_init(); #endif get_clocks(); diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ce34e3eeff8..53fc936f022 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -166,7 +166,7 @@ dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \ am571x-idk.dtb dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb -dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \ +dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \ ls1021a-qds-lpuart.dtb \ ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \ ls1021a-iot-duart.dtb diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index b5b08aae232..93e6597d9e0 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -18,7 +18,7 @@ */ #define CONFIG_SYS_MEM_RESERVE_SECURE (2048 * 1024) /* 2MB */ -#ifdef CONFIG_LS2080A +#ifdef CONFIG_ARCH_LS2080A #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4, 4 } #define SRDS_MAX_LANES 8 #define CONFIG_SYS_PAGE_SIZE 0x10000 @@ -132,7 +132,7 @@ #define CONFIG_SYS_FSL_PEX_LUT_BE /* SoC related */ -#ifdef CONFIG_LS1043A +#ifdef CONFIG_ARCH_LS1043A #define CONFIG_SYS_FMAN_V3 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 7 @@ -185,7 +185,12 @@ #elif defined(CONFIG_ARCH_LS1012A) #define GICD_BASE 0x01401000 #define GICC_BASE 0x01402000 - +#define CONFIG_SYS_FSL_SFP_VER_3_2 +#define CONFIG_SYS_FSL_SEC_MON_BE +#define CONFIG_SYS_FSL_SFP_BE +#define CONFIG_SYS_FSL_SRK_LE +#define CONFIG_KEY_REVOCATION +#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 #define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) #define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE @@ -199,7 +204,7 @@ #define CONFIG_SYS_FSL_IFC_BE #define CONFIG_SYS_FSL_SFP_VER_3_2 -#define CONFIG_SYS_FSL_SNVS_LE +#define CONFIG_SYS_FSL_SEC_MON_BE #define CONFIG_SYS_FSL_SFP_BE #define CONFIG_SYS_FSL_SRK_LE #define CONFIG_KEY_REVOCATION diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index bcf3e3863e6..95c3e2fc086 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -249,7 +249,7 @@ static struct mm_region final_map[] = { PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, -#ifdef CONFIG_LS2080A +#ifdef CONFIG_ARCH_LS2080A { CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_SIZE, PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h index 70181c5077c..a8f9a505016 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h @@ -9,7 +9,7 @@ #include <config.h> -#ifdef CONFIG_LS2080A +#ifdef CONFIG_ARCH_LS2080A enum srds_prtcl { /* * Nobody will check whether the device 'NONE' has been configured, diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 2f7233f2feb..5c4da0f0e35 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -108,7 +108,7 @@ #define DCU_LAYER_MAX_NUM 16 -#ifdef CONFIG_LS102XA +#ifdef CONFIG_ARCH_LS1021A #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 #else diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h index 1ad221a9876..5674d37c04d 100644 --- a/arch/arm/include/asm/config.h +++ b/arch/arm/include/asm/config.h @@ -14,7 +14,7 @@ #define CONFIG_STATIC_RELA #endif -#if defined(CONFIG_LS102XA) || \ +#if defined(CONFIG_ARCH_LS1021A) || \ defined(CONFIG_CPU_PXA27X) || \ defined(CONFIG_CPU_MONAHANS) || \ defined(CONFIG_CPU_PXA25X) || \ diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index d98a1e8f89d..f5ca5d3b697 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -27,10 +27,11 @@ #define CONFIG_SPL_UBOOT_KEY_HASH NULL #endif /* ifdef CONFIG_SPL_BUILD */ +#define CONFIG_KEY_REVOCATION + #ifndef CONFIG_SPL_BUILD #define CONFIG_CMD_BLOB #define CONFIG_CMD_HASH -#define CONFIG_KEY_REVOCATION #ifndef CONFIG_SYS_RAMBOOT /* The key used for verification of next level images * is picked up from an Extension Table which has @@ -46,14 +47,15 @@ #endif -#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A) -/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit - * Similiarly for LS2080 +#if defined(CONFIG_FSL_LAYERSCAPE) +/* + * For fsl layerscape based platforms, ESBC image Address in Header + * is 64 bit. */ #define CONFIG_ESBC_ADDR_64BIT #endif -#ifdef CONFIG_LS2080A +#ifdef CONFIG_ARCH_LS2080A #define CONFIG_EXTRA_ENV \ "setenv fdt_high 0xa0000000;" \ "setenv initrd_high 0xcfffffff;" \ @@ -68,7 +70,7 @@ /* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from * Non-XIP Memory (Nand/SD)*/ #if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_FSL_LSCH3) || \ - defined(CONFIG_SD_BOOT) + defined(CONFIG_SD_BOOT) || defined(CONFIG_NAND_BOOT) #define CONFIG_BOOTSCRIPT_COPY_RAM #endif /* The address needs to be modified according to NOR, NAND, SD and @@ -86,16 +88,37 @@ /* For SD boot address and size are assigned in terms of sector * offset and no. of sectors respectively. */ -#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000900 +#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) +#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000920 +#else +#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000900 +#endif #define CONFIG_BS_ADDR_DEVICE 0x00000940 #define CONFIG_BS_HDR_SIZE 0x00000010 #define CONFIG_BS_SIZE 0x00000008 +#elif defined(CONFIG_NAND_BOOT) +#define CONFIG_BS_HDR_ADDR_DEVICE 0x00800000 +#define CONFIG_BS_ADDR_DEVICE 0x00802000 +#define CONFIG_BS_HDR_SIZE 0x00002000 +#define CONFIG_BS_SIZE 0x00001000 +#elif defined(CONFIG_QSPI_BOOT) +#ifdef CONFIG_ARCH_LS1046A +#define CONFIG_BS_HDR_ADDR_DEVICE 0x40780000 +#define CONFIG_BS_ADDR_DEVICE 0x40800000 +#elif defined(CONFIG_ARCH_LS1012A) +#define CONFIG_BS_HDR_ADDR_DEVICE 0x400c0000 +#define CONFIG_BS_ADDR_DEVICE 0x40060000 #else +#error "Platform not supported" +#endif +#define CONFIG_BS_HDR_SIZE 0x00002000 +#define CONFIG_BS_SIZE 0x00001000 +#else /* Default NOR Boot */ #define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000 #define CONFIG_BS_ADDR_DEVICE 0x60060000 #define CONFIG_BS_HDR_SIZE 0x00002000 #define CONFIG_BS_SIZE 0x00001000 -#endif /* #ifdef CONFIG_SD_BOOT */ +#endif #define CONFIG_BS_HDR_ADDR_RAM 0x81000000 #define CONFIG_BS_ADDR_RAM 0x81020000 #endif @@ -109,23 +132,13 @@ #endif #ifdef CONFIG_FSL_LS_PPA -#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP -#ifdef CONFIG_LS1043A -#define CONFIG_SYS_LS_PPA_ESBC_ADDR 0x600c0000 -#elif defined(CONFIG_FSL_LSCH3) -#define CONFIG_SYS_LS_PPA_ESBC_ADDR 0x580c40000 -#endif -#else -#error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined" -#endif /* ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP */ - /* Define the key hash here if SRK used for signing PPA image is * different from SRK hash put in SFP used for U-Boot. * Example - * #define CONFIG_PPA_KEY_HASH \ + * #define PPA_KEY_HASH \ * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b" */ -#define CONFIG_PPA_KEY_HASH NULL +#define PPA_KEY_HASH NULL #endif /* ifdef CONFIG_FSL_LS_PPA */ #include <config_fsl_chain_trust.h> diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index eb817f1e86f..63fdffddb1a 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1145,8 +1145,9 @@ switch_as: li r0,0 1: dcbz r0,r3 -#ifdef CONFIG_E6500 /* Lock/unlock L2 cache instead of L1 */ +#ifdef CONFIG_E6500 /* Lock/unlock L2 cache long with L1 */ dcbtls 2, r0, r3 + dcbtls 0, r0, r3 #else dcbtls 0, r0, r3 #endif @@ -1790,8 +1791,9 @@ unlock_ram_in_cache: slwi r4,r4,(10 - 1 - L1_CACHE_SHIFT) mtctr r4 1: dcbi r0,r3 -#ifdef CONFIG_E6500 /* lock/unlock L2 cache instead of L1 */ +#ifdef CONFIG_E6500 /* lock/unlock L2 cache long with L1 */ dcblc 2, r0, r3 + dcblc 0, r0, r3 #else dcblc r0,r3 #endif diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 1b7cf0996b0..2b5a2913ec9 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -100,11 +100,11 @@ #endif /* ifdef CONFIG_SPL_BUILD */ #define CONFIG_CMD_ESBC_VALIDATE -#define CONFIG_CMD_BLOB #define CONFIG_FSL_SEC_MON #define CONFIG_SHA_PROG_HW_ACCEL #ifndef CONFIG_SPL_BUILD +#define CONFIG_CMD_BLOB /* * fsl_setenv_chain_of_trust() must be called from * board_late_init() diff --git a/board/freescale/common/arm_sleep.c b/board/freescale/common/arm_sleep.c index 16fd445306e..6ed5d9ef1fa 100644 --- a/board/freescale/common/arm_sleep.c +++ b/board/freescale/common/arm_sleep.c @@ -13,7 +13,7 @@ #endif #include <asm/armv7.h> -#if defined(CONFIG_LS102XA) +#if defined(CONFIG_ARCH_LS1021A) #include <asm/arch/immap_ls102xa.h> #endif @@ -66,7 +66,7 @@ static void dp_ddr_restore(void) *dst++ = *src++; } -#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_LS102XA) +#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_ARCH_LS1021A) void ls1_psci_resume_fixup(void) { u32 tmp; @@ -104,7 +104,7 @@ static void dp_resume_prepare(void) #ifdef CONFIG_U_QE u_qe_resume(); #endif -#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_LS102XA) +#if defined(CONFIG_ARMV7_PSCI) && defined(CONFIG_ARCH_LS1021A) ls1_psci_resume_fixup(); #endif } diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c index 438e7819576..aad1b93d140 100644 --- a/board/freescale/common/fsl_chain_of_trust.c +++ b/board/freescale/common/fsl_chain_of_trust.c @@ -22,7 +22,7 @@ #include <asm/fsl_pamu.h> #endif -#ifdef CONFIG_LS102XA +#ifdef CONFIG_ARCH_LS1021A #include <asm/arch/immap_ls102xa.h> #endif diff --git a/board/freescale/common/fsl_validate.c b/board/freescale/common/fsl_validate.c index 7396aa2f698..ed48c5c8bd7 100644 --- a/board/freescale/common/fsl_validate.c +++ b/board/freescale/common/fsl_validate.c @@ -15,7 +15,7 @@ #include <u-boot/rsa-mod-exp.h> #include <hash.h> #include <fsl_secboot_err.h> -#ifdef CONFIG_LS102XA +#ifdef CONFIG_ARCH_LS1021A #include <asm/arch/immap_ls102xa.h> #endif @@ -393,6 +393,7 @@ static void fsl_secboot_bootscript_parse_failure(void) */ void fsl_secboot_handle_error(int error) { +#ifndef CONFIG_SPL_BUILD const struct fsl_secboot_errcode *e; for (e = fsl_secboot_errcodes; e->errcode != ERROR_ESBC_CLIENT_MAX; @@ -400,6 +401,9 @@ void fsl_secboot_handle_error(int error) if (e->errcode == error) printf("ERROR :: %x :: %s\n", error, e->name); } +#else + printf("ERROR :: %x\n", error); +#endif /* If Boot Mode is secure, transition the SNVS state and issue * reset based on type of failure and ITS setting. diff --git a/board/freescale/ls1012ardb/MAINTAINERS b/board/freescale/ls1012ardb/MAINTAINERS index 79a2a7dd247..2cb38e7405f 100644 --- a/board/freescale/ls1012ardb/MAINTAINERS +++ b/board/freescale/ls1012ardb/MAINTAINERS @@ -4,3 +4,7 @@ S: Maintained F: board/freescale/ls1012ardb/ F: include/configs/ls1012ardb.h F: configs/ls1012ardb_qspi_defconfig + +M: Sumit Garg <sumit.garg@nxp.com> +S: Maintained +F: configs/ls1012ardb_qspi_SECURE_BOOT_defconfig diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c index a23a23be1f0..a21e4c4aebc 100644 --- a/board/freescale/ls1012ardb/ls1012ardb.c +++ b/board/freescale/ls1012ardb/ls1012ardb.c @@ -22,6 +22,7 @@ #include <environment.h> #include <fsl_mmdc.h> #include <netdev.h> +#include <fsl_sec.h> DECLARE_GLOBAL_DATA_PTR; @@ -118,6 +119,10 @@ int board_init(void) gd->env_addr = (ulong)&default_environment[0]; #endif +#ifdef CONFIG_FSL_CAAM + sec_init(); +#endif + #ifdef CONFIG_FSL_LS_PPA ppa_init(); #endif diff --git a/board/freescale/ls1043aqds/Makefile b/board/freescale/ls1043aqds/Makefile index f727bfd622e..49d8d7d9b96 100644 --- a/board/freescale/ls1043aqds/Makefile +++ b/board/freescale/ls1043aqds/Makefile @@ -5,5 +5,7 @@ # obj-y += ddr.o +ifndef CONFIG_SPL_BUILD obj-y += eth.o +endif obj-y += ls1043aqds.o diff --git a/board/freescale/ls1043ardb/MAINTAINERS b/board/freescale/ls1043ardb/MAINTAINERS index 0503a3fcc96..87aa006455c 100644 --- a/board/freescale/ls1043ardb/MAINTAINERS +++ b/board/freescale/ls1043ardb/MAINTAINERS @@ -12,3 +12,5 @@ LS1043A_SECURE_BOOT BOARD M: Ruchika Gupta <ruchika.gupta@nxp.com> S: Maintained F: configs/ls1043ardb_SECURE_BOOT_defconfig +F: configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig +F: configs/ls1043ardb_nand_SECURE_BOOT_defconfig diff --git a/board/freescale/ls1043ardb/Makefile b/board/freescale/ls1043ardb/Makefile index 5fe1cc93932..2a4452e5ec1 100644 --- a/board/freescale/ls1043ardb/Makefile +++ b/board/freescale/ls1043ardb/Makefile @@ -4,7 +4,9 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += cpld.o obj-y += ddr.o obj-y += ls1043ardb.o +ifndef CONFIG_SPL_BUILD obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o +obj-y += cpld.o +endif diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index 728de2e3f17..9dc1cbc3436 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -27,6 +27,15 @@ DECLARE_GLOBAL_DATA_PTR; +int board_early_init_f(void) +{ + fsl_lsch2_early_init_f(); + + return 0; +} + +#ifndef CONFIG_SPL_BUILD + int checkboard(void) { static const char *freq[2] = {"100.00MHZ", "156.25MHZ"}; @@ -65,13 +74,6 @@ int checkboard(void) return 0; } -int board_early_init_f(void) -{ - fsl_lsch2_early_init_f(); - - return 0; -} - int board_init(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; @@ -213,3 +215,5 @@ u16 flash_read16(void *addr) return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); } + +#endif diff --git a/board/freescale/ls1046aqds/MAINTAINERS b/board/freescale/ls1046aqds/MAINTAINERS index b4549ae138d..6737d558ce0 100644 --- a/board/freescale/ls1046aqds/MAINTAINERS +++ b/board/freescale/ls1046aqds/MAINTAINERS @@ -8,3 +8,7 @@ F: configs/ls1046aqds_nand_defconfig F: configs/ls1046aqds_sdcard_ifc_defconfig F: configs/ls1046aqds_sdcard_qspi_defconfig F: configs/ls1046aqds_qspi_defconfig + +M: Sumit Garg <sumit.garg@nxp.com> +S: Maintained +F: configs/ls1046aqds_SECURE_BOOT_defconfig diff --git a/board/freescale/ls1046aqds/Makefile b/board/freescale/ls1046aqds/Makefile index df6e5461dbc..6267522cc26 100644 --- a/board/freescale/ls1046aqds/Makefile +++ b/board/freescale/ls1046aqds/Makefile @@ -5,5 +5,7 @@ # obj-y += ddr.o +ifndef CONFIG_SPL_BUILD obj-y += eth.o +endif obj-y += ls1046aqds.o diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c index 69fc15b6815..58ce75acf6c 100644 --- a/board/freescale/ls1046aqds/ls1046aqds.c +++ b/board/freescale/ls1046aqds/ls1046aqds.c @@ -22,6 +22,7 @@ #include <fsl_csu.h> #include <fsl_esdhc.h> #include <fsl_ifc.h> +#include <fsl_sec.h> #include <spl.h> #include "../common/vid.h" @@ -266,6 +267,24 @@ int board_init(void) if (adjust_vdd(0)) printf("Warning: Adjusting core voltage failed.\n"); +#ifdef CONFIG_SECURE_BOOT + /* + * In case of Secure Boot, the IBR configures the SMMU + * to allow only Secure transactions. + * SMMU must be reset in bypass mode. + * Set the ClientPD bit and Clear the USFCFG Bit + */ + u32 val; + val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_SCR0, val); + val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_NSCR0, val); +#endif + +#ifdef CONFIG_FSL_CAAM + sec_init(); +#endif + return 0; } diff --git a/board/freescale/ls1046ardb/Kconfig b/board/freescale/ls1046ardb/Kconfig index a62255c78db..b9f2ed7e4bb 100644 --- a/board/freescale/ls1046ardb/Kconfig +++ b/board/freescale/ls1046ardb/Kconfig @@ -12,5 +12,5 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1046ardb" - +source "board/freescale/common/Kconfig" endif diff --git a/board/freescale/ls1046ardb/MAINTAINERS b/board/freescale/ls1046ardb/MAINTAINERS index ff42bef090e..79a2290974f 100644 --- a/board/freescale/ls1046ardb/MAINTAINERS +++ b/board/freescale/ls1046ardb/MAINTAINERS @@ -7,3 +7,13 @@ F: include/configs/ls1046ardb.h F: configs/ls1046ardb_qspi_defconfig F: configs/ls1046ardb_sdcard_defconfig F: configs/ls1046ardb_emmc_defconfig + +LS1046A_SECURE_BOOT BOARD +M: Ruchika Gupta <ruchika.gupta@nxp.com> +S: Maintained +F: configs/ls1046ardb_SECURE_BOOT_defconfig +F: configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig + +M: Sumit Garg <sumit.garg@nxp.com> +S: Maintained +F: configs/ls1046ardb_qspi_SECURE_BOOT_defconfig diff --git a/board/freescale/ls1046ardb/Makefile b/board/freescale/ls1046ardb/Makefile index 348eb76ea75..b92ed0b3ec4 100644 --- a/board/freescale/ls1046ardb/Makefile +++ b/board/freescale/ls1046ardb/Makefile @@ -4,7 +4,9 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += cpld.o obj-y += ddr.o obj-y += ls1046ardb.o +ifndef CONFIG_SPL_BUILD obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o +obj-y += cpld.o +endif diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c index 02b6c4c3752..1dd5e698824 100644 --- a/board/freescale/ls1046ardb/ls1046ardb.c +++ b/board/freescale/ls1046ardb/ls1046ardb.c @@ -21,9 +21,18 @@ #include <fsl_esdhc.h> #include <power/mc34vr500_pmic.h> #include "cpld.h" +#include <fsl_sec.h> DECLARE_GLOBAL_DATA_PTR; +int board_early_init_f(void) +{ + fsl_lsch2_early_init_f(); + + return 0; +} + +#ifndef CONFIG_SPL_BUILD int checkboard(void) { static const char *freq[2] = {"100.00MHZ", "156.25MHZ"}; @@ -56,13 +65,6 @@ int checkboard(void) return 0; } -int board_early_init_f(void) -{ - fsl_lsch2_early_init_f(); - - return 0; -} - int board_init(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; @@ -71,6 +73,24 @@ int board_init(void) enable_layerscape_ns_access(); #endif +#ifdef CONFIG_SECURE_BOOT + /* + * In case of Secure Boot, the IBR configures the SMMU + * to allow only Secure transactions. + * SMMU must be reset in bypass mode. + * Set the ClientPD bit and Clear the USFCFG Bit + */ + u32 val; + val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_SCR0, val); + val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_NSCR0, val); +#endif + +#ifdef CONFIG_FSL_CAAM + sec_init(); +#endif + #ifdef CONFIG_FSL_LS_PPA ppa_init(); #endif @@ -161,3 +181,4 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } +#endif diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index 56f7c1a9099..f370f72baa6 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -167,6 +167,13 @@ unsigned long get_board_ddr_clk(void) return CONFIG_DDR_CLK_FREQ; } +#ifdef CONFIG_TARGET_T1024RDB +void board_reset(void) +{ + CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET); +} +#endif + int misc_init_r(void) { return 0; diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig new file mode 100644 index 00000000000..97f49d5bd57 --- /dev/null +++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig @@ -0,0 +1,48 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1012ARDB=y +CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" +# CONFIG_CMD_IMLS is not set +CONFIG_SYS_NS16550=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-rdb" +CONFIG_FSL_LS_PPA=y +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPI_FLASH=y +# CONFIG_SYS_MALLOC_F is not set +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SECURE_BOOT=y +CONFIG_QSPI_BOOT=y +CONFIG_BOOTDELAY=10 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_RSA=y +CONFIG_RSA_SOFTWARE_EXP=y diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig index 6f86877e7e2..861d49bb02a 100644 --- a/configs/ls1043ardb_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_SECURE_BOOT_defconfig @@ -3,6 +3,7 @@ CONFIG_TARGET_LS1043ARDB=y CONFIG_SECURE_BOOT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" CONFIG_FIT=y +CONFIG_FSL_LS_PPA=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=10 diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig new file mode 100644 index 00000000000..66c89fa5320 --- /dev/null +++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig @@ -0,0 +1,57 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1043ARDB=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT" +CONFIG_NAND_BOOT=y +CONFIG_SECURE_BOOT=y +CONFIG_BOOTDELAY=10 +CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 +CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PXE=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_RSA=y +CONFIG_SPL_RSA=y +CONFIG_SPL_CRYPTO_SUPPORT=y +CONFIG_SPL_HASH_SUPPORT=y diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig new file mode 100644 index 00000000000..3f35d6493f7 --- /dev/null +++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig @@ -0,0 +1,57 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1043ARDB=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" +CONFIG_SECURE_BOOT=y +CONFIG_SD_BOOT=y +CONFIG_BOOTDELAY=10 +CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 +CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PXE=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_RSA=y +CONFIG_SPL_RSA=y +CONFIG_SPL_CRYPTO_SUPPORT=y +CONFIG_SPL_HASH_SUPPORT=y diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index 02b5b5434af..d34a253f113 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -18,7 +18,6 @@ CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GPT=y diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig new file mode 100644 index 00000000000..dc16fa0b8fa --- /dev/null +++ b/configs/ls1046aqds_SECURE_BOOT_defconfig @@ -0,0 +1,39 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1046AQDS=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SECURE_BOOT=y +CONFIG_BOOTDELAY=10 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_RSA=y diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig index 66b4fd1c9ff..b9329337eca 100644 --- a/configs/ls1046aqds_defconfig +++ b/configs/ls1046aqds_defconfig @@ -36,3 +36,4 @@ CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_FSL_LS_PPA=y diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig index 85ef8e0ff26..c282a64da67 100644 --- a/configs/ls1046aqds_lpuart_defconfig +++ b/configs/ls1046aqds_lpuart_defconfig @@ -32,3 +32,4 @@ CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_FSL_LS_PPA=y diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig index f0730b626af..923d41755e3 100644 --- a/configs/ls1046aqds_nand_defconfig +++ b/configs/ls1046aqds_nand_defconfig @@ -41,3 +41,4 @@ CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_FSL_LS_PPA=y diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig index 6520cebd5dd..5d7da728d26 100644 --- a/configs/ls1046aqds_qspi_defconfig +++ b/configs/ls1046aqds_qspi_defconfig @@ -38,3 +38,4 @@ CONFIG_FSL_DSPI=y CONFIG_FSL_QSPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_FSL_LS_PPA=y diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig index 16bb94dc2f6..7e8f1a18f3c 100644 --- a/configs/ls1046aqds_sdcard_ifc_defconfig +++ b/configs/ls1046aqds_sdcard_ifc_defconfig @@ -42,3 +42,4 @@ CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_FSL_LS_PPA=y diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig index 9e78115e2de..1707bc4a637 100644 --- a/configs/ls1046aqds_sdcard_qspi_defconfig +++ b/configs/ls1046aqds_sdcard_qspi_defconfig @@ -43,3 +43,4 @@ CONFIG_FSL_DSPI=y CONFIG_FSL_QSPI=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_FSL_LS_PPA=y diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig new file mode 100644 index 00000000000..af14e194679 --- /dev/null +++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig @@ -0,0 +1,37 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1046ARDB=y +CONFIG_FSL_LS_PPA=y +CONFIG_QSPI_AHB_INIT=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_QSPI_BOOT=y +CONFIG_SECURE_BOOT=y +CONFIG_BOOTDELAY=10 +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_FSL_QSPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_RSA=y diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig new file mode 100644 index 00000000000..a41ec80d3ad --- /dev/null +++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig @@ -0,0 +1,45 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1046ARDB=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL" +CONFIG_SECURE_BOOT=y +CONFIG_SD_BOOT=y +CONFIG_BOOTDELAY=10 +CONFIG_SPL=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_FSL_QSPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_RSA=y +CONFIG_SPL_RSA=y +CONFIG_SPL_CRYPTO_SUPPORT=y +CONFIG_SPL_HASH_SUPPORT=y diff --git a/configs/ls2080a_emu_defconfig b/configs/ls2080a_emu_defconfig index edf76851a30..6211b6b5af2 100644 --- a/configs/ls2080a_emu_defconfig +++ b/configs/ls2080a_emu_defconfig @@ -5,7 +5,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="EMU,LS2080A" +CONFIG_SYS_EXTRA_OPTIONS="EMU" CONFIG_BOOTDELAY=10 # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_CONSOLE is not set diff --git a/configs/ls2080a_simu_defconfig b/configs/ls2080a_simu_defconfig index 5cc9316a20a..b6f7709af2b 100644 --- a/configs/ls2080a_simu_defconfig +++ b/configs/ls2080a_simu_defconfig @@ -5,7 +5,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="SIMU, LS2080A" +CONFIG_SYS_EXTRA_OPTIONS="SIMU" CONFIG_BOOTDELAY=10 # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_CONSOLE is not set diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig index 6ab9703c45e..45e5d87f361 100644 --- a/configs/ls2080aqds_SECURE_BOOT_defconfig +++ b/configs/ls2080aqds_SECURE_BOOT_defconfig @@ -7,7 +7,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="LS2080A" CONFIG_BOOTDELAY=10 CONFIG_CMD_GREPENV=y CONFIG_CMD_GPT=y diff --git a/configs/ls2080aqds_defconfig b/configs/ls2080aqds_defconfig index fb9a3e4041f..770dea06056 100644 --- a/configs/ls2080aqds_defconfig +++ b/configs/ls2080aqds_defconfig @@ -7,7 +7,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="LS2080A" CONFIG_BOOTDELAY=10 CONFIG_CMD_GREPENV=y CONFIG_CMD_GPT=y diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig index 2a649c576d3..aa4f1345586 100644 --- a/configs/ls2080aqds_nand_defconfig +++ b/configs/ls2080aqds_nand_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A" +CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig index a81e7c69452..6deb0acbd23 100644 --- a/configs/ls2080aqds_qspi_defconfig +++ b/configs/ls2080aqds_qspi_defconfig @@ -5,7 +5,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT,LS2080A" +CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" CONFIG_QSPI_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_CMD_GREPENV=y diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig index 70baf0efc8d..19c9db5ae83 100644 --- a/configs/ls2080ardb_SECURE_BOOT_defconfig +++ b/configs/ls2080ardb_SECURE_BOOT_defconfig @@ -7,7 +7,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="LS2080A" CONFIG_BOOTDELAY=10 CONFIG_CMD_GREPENV=y CONFIG_CMD_GPT=y diff --git a/configs/ls2080ardb_defconfig b/configs/ls2080ardb_defconfig index a1e552d69a3..e0cb7f898e7 100644 --- a/configs/ls2080ardb_defconfig +++ b/configs/ls2080ardb_defconfig @@ -7,7 +7,6 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="LS2080A" CONFIG_BOOTDELAY=10 CONFIG_CMD_GREPENV=y CONFIG_CMD_GPT=y diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig index 81987fe6b3a..cd57374a4e7 100644 --- a/configs/ls2080ardb_nand_defconfig +++ b/configs/ls2080ardb_nand_defconfig @@ -10,7 +10,7 @@ CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A" +CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_ENV_SUPPORT=y diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c index 6125bbb558d..375ff9d0e38 100644 --- a/drivers/crypto/fsl/jobdesc.c +++ b/drivers/crypto/fsl/jobdesc.c @@ -204,7 +204,7 @@ void inline_cnstr_jobdesc_hash(uint32_t *desc, append_store(desc, dma_addr_out, storelen, LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_CONTEXT); } - +#ifndef CONFIG_SPL_BUILD void inline_cnstr_jobdesc_blob_encap(uint32_t *desc, uint8_t *key_idnfr, uint8_t *plain_txt, uint8_t *enc_blob, uint32_t in_sz) @@ -252,7 +252,7 @@ void inline_cnstr_jobdesc_blob_decap(uint32_t *desc, uint8_t *key_idnfr, append_operation(desc, OP_TYPE_DECAP_PROTOCOL | OP_PCLID_BLOB); } - +#endif /* * Descriptor to instantiate RNG State Handle 0 in normal mode and * load the JDKEK, TDKEK and TDSK registers diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c index c33777fc7dd..986eabfb088 100644 --- a/drivers/crypto/fsl/jr.c +++ b/drivers/crypto/fsl/jr.c @@ -341,7 +341,9 @@ static void desc_done(uint32_t status, void *arg) { struct result *x = arg; x->status = status; +#ifndef CONFIG_SPL_BUILD caam_jr_strstatus(status); +#endif x->done = 1; } @@ -435,7 +437,11 @@ static inline int sec_reset_idx(uint8_t sec_idx) return 0; } - +int sec_reset(void) +{ + return sec_reset_idx(0); +} +#ifndef CONFIG_SPL_BUILD static int instantiate_rng(uint8_t sec_idx) { struct result op; @@ -471,11 +477,6 @@ static int instantiate_rng(uint8_t sec_idx) return ret; } -int sec_reset(void) -{ - return sec_reset_idx(0); -} - static u8 get_rng_vid(uint8_t sec_idx) { ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx); @@ -560,7 +561,7 @@ static int rng_init(uint8_t sec_idx) return ret; } - +#endif int sec_init_idx(uint8_t sec_idx) { ccsr_sec_t *sec = (void *)SEC_ADDR(sec_idx); @@ -585,7 +586,7 @@ int sec_init_idx(uint8_t sec_idx) * For AXI Read - Cacheable, Read allocate * Only For LS2080a, to solve CAAM coherency issues */ -#ifdef CONFIG_LS2080A +#ifdef CONFIG_ARCH_LS2080A mcr = (mcr & ~MCFGR_AWCACHE_MASK) | (0xb << MCFGR_AWCACHE_SHIFT); mcr = (mcr & ~MCFGR_ARCACHE_MASK) | (0x6 << MCFGR_ARCACHE_SHIFT); #else @@ -633,7 +634,7 @@ int sec_init_idx(uint8_t sec_idx) pamu_enable(); #endif - +#ifndef CONFIG_SPL_BUILD if (get_rng_vid(sec_idx) >= 4) { if (rng_init(sec_idx) < 0) { printf("SEC%u: RNG instantiation failed\n", sec_idx); @@ -641,7 +642,7 @@ int sec_init_idx(uint8_t sec_idx) } printf("SEC%u: RNG instantiated\n", sec_idx); } - +#endif return ret; } diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c index cee97fe2323..b45a8797e44 100644 --- a/drivers/ddr/fsl/options.c +++ b/drivers/ddr/fsl/options.c @@ -33,7 +33,7 @@ struct dynamic_odt { /* Quad rank is not verified yet due availability. * Replacing 20 OHM with 34 OHM since DDR4 doesn't have 20 OHM option */ -static const struct dynamic_odt single_Q[4] = { +static __maybe_unused const struct dynamic_odt single_Q[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_CS_AND_OTHER_DIMM, @@ -60,7 +60,7 @@ static const struct dynamic_odt single_Q[4] = { } }; -static const struct dynamic_odt single_D[4] = { +static __maybe_unused const struct dynamic_odt single_D[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_ALL, @@ -77,7 +77,7 @@ static const struct dynamic_odt single_D[4] = { {0, 0, 0, 0} }; -static const struct dynamic_odt single_S[4] = { +static __maybe_unused const struct dynamic_odt single_S[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_ALL, @@ -89,7 +89,7 @@ static const struct dynamic_odt single_S[4] = { {0, 0, 0, 0}, }; -static const struct dynamic_odt dual_DD[4] = { +static __maybe_unused const struct dynamic_odt dual_DD[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_SAME_DIMM, @@ -116,7 +116,7 @@ static const struct dynamic_odt dual_DD[4] = { } }; -static const struct dynamic_odt dual_DS[4] = { +static __maybe_unused const struct dynamic_odt dual_DS[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_SAME_DIMM, @@ -137,7 +137,7 @@ static const struct dynamic_odt dual_DS[4] = { }, {0, 0, 0, 0} }; -static const struct dynamic_odt dual_SD[4] = { +static __maybe_unused const struct dynamic_odt dual_SD[4] = { { /* cs0 */ FSL_DDR_ODT_OTHER_DIMM, FSL_DDR_ODT_ALL, @@ -159,7 +159,7 @@ static const struct dynamic_odt dual_SD[4] = { } }; -static const struct dynamic_odt dual_SS[4] = { +static __maybe_unused const struct dynamic_odt dual_SS[4] = { { /* cs0 */ FSL_DDR_ODT_OTHER_DIMM, FSL_DDR_ODT_ALL, @@ -176,7 +176,7 @@ static const struct dynamic_odt dual_SS[4] = { {0, 0, 0, 0} }; -static const struct dynamic_odt dual_D0[4] = { +static __maybe_unused const struct dynamic_odt dual_D0[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_SAME_DIMM, @@ -193,7 +193,7 @@ static const struct dynamic_odt dual_D0[4] = { {0, 0, 0, 0} }; -static const struct dynamic_odt dual_0D[4] = { +static __maybe_unused const struct dynamic_odt dual_0D[4] = { {0, 0, 0, 0}, {0, 0, 0, 0}, { /* cs2 */ @@ -210,7 +210,7 @@ static const struct dynamic_odt dual_0D[4] = { } }; -static const struct dynamic_odt dual_S0[4] = { +static __maybe_unused const struct dynamic_odt dual_S0[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_CS, @@ -223,7 +223,7 @@ static const struct dynamic_odt dual_S0[4] = { }; -static const struct dynamic_odt dual_0S[4] = { +static __maybe_unused const struct dynamic_odt dual_0S[4] = { {0, 0, 0, 0}, {0, 0, 0, 0}, { /* cs2 */ @@ -236,7 +236,7 @@ static const struct dynamic_odt dual_0S[4] = { }; -static const struct dynamic_odt odt_unknown[4] = { +static __maybe_unused const struct dynamic_odt odt_unknown[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_CS, @@ -263,7 +263,7 @@ static const struct dynamic_odt odt_unknown[4] = { } }; #elif defined(CONFIG_SYS_FSL_DDR3) -static const struct dynamic_odt single_Q[4] = { +static __maybe_unused const struct dynamic_odt single_Q[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_CS_AND_OTHER_DIMM, @@ -290,7 +290,7 @@ static const struct dynamic_odt single_Q[4] = { } }; -static const struct dynamic_odt single_D[4] = { +static __maybe_unused const struct dynamic_odt single_D[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_ALL, @@ -307,7 +307,7 @@ static const struct dynamic_odt single_D[4] = { {0, 0, 0, 0} }; -static const struct dynamic_odt single_S[4] = { +static __maybe_unused const struct dynamic_odt single_S[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_ALL, @@ -319,7 +319,7 @@ static const struct dynamic_odt single_S[4] = { {0, 0, 0, 0}, }; -static const struct dynamic_odt dual_DD[4] = { +static __maybe_unused const struct dynamic_odt dual_DD[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_SAME_DIMM, @@ -346,7 +346,7 @@ static const struct dynamic_odt dual_DD[4] = { } }; -static const struct dynamic_odt dual_DS[4] = { +static __maybe_unused const struct dynamic_odt dual_DS[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_SAME_DIMM, @@ -367,7 +367,7 @@ static const struct dynamic_odt dual_DS[4] = { }, {0, 0, 0, 0} }; -static const struct dynamic_odt dual_SD[4] = { +static __maybe_unused const struct dynamic_odt dual_SD[4] = { { /* cs0 */ FSL_DDR_ODT_OTHER_DIMM, FSL_DDR_ODT_ALL, @@ -389,7 +389,7 @@ static const struct dynamic_odt dual_SD[4] = { } }; -static const struct dynamic_odt dual_SS[4] = { +static __maybe_unused const struct dynamic_odt dual_SS[4] = { { /* cs0 */ FSL_DDR_ODT_OTHER_DIMM, FSL_DDR_ODT_ALL, @@ -406,7 +406,7 @@ static const struct dynamic_odt dual_SS[4] = { {0, 0, 0, 0} }; -static const struct dynamic_odt dual_D0[4] = { +static __maybe_unused const struct dynamic_odt dual_D0[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_SAME_DIMM, @@ -423,7 +423,7 @@ static const struct dynamic_odt dual_D0[4] = { {0, 0, 0, 0} }; -static const struct dynamic_odt dual_0D[4] = { +static __maybe_unused const struct dynamic_odt dual_0D[4] = { {0, 0, 0, 0}, {0, 0, 0, 0}, { /* cs2 */ @@ -440,7 +440,7 @@ static const struct dynamic_odt dual_0D[4] = { } }; -static const struct dynamic_odt dual_S0[4] = { +static __maybe_unused const struct dynamic_odt dual_S0[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_CS, @@ -453,7 +453,7 @@ static const struct dynamic_odt dual_S0[4] = { }; -static const struct dynamic_odt dual_0S[4] = { +static __maybe_unused const struct dynamic_odt dual_0S[4] = { {0, 0, 0, 0}, {0, 0, 0, 0}, { /* cs2 */ @@ -466,7 +466,7 @@ static const struct dynamic_odt dual_0S[4] = { }; -static const struct dynamic_odt odt_unknown[4] = { +static __maybe_unused const struct dynamic_odt odt_unknown[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_CS, @@ -493,14 +493,14 @@ static const struct dynamic_odt odt_unknown[4] = { } }; #else /* CONFIG_SYS_FSL_DDR3 */ -static const struct dynamic_odt single_Q[4] = { +static __maybe_unused const struct dynamic_odt single_Q[4] = { {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0} }; -static const struct dynamic_odt single_D[4] = { +static __maybe_unused const struct dynamic_odt single_D[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_ALL, @@ -517,7 +517,7 @@ static const struct dynamic_odt single_D[4] = { {0, 0, 0, 0} }; -static const struct dynamic_odt single_S[4] = { +static __maybe_unused const struct dynamic_odt single_S[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_ALL, @@ -529,7 +529,7 @@ static const struct dynamic_odt single_S[4] = { {0, 0, 0, 0}, }; -static const struct dynamic_odt dual_DD[4] = { +static __maybe_unused const struct dynamic_odt dual_DD[4] = { { /* cs0 */ FSL_DDR_ODT_OTHER_DIMM, FSL_DDR_ODT_OTHER_DIMM, @@ -556,7 +556,7 @@ static const struct dynamic_odt dual_DD[4] = { } }; -static const struct dynamic_odt dual_DS[4] = { +static __maybe_unused const struct dynamic_odt dual_DS[4] = { { /* cs0 */ FSL_DDR_ODT_OTHER_DIMM, FSL_DDR_ODT_OTHER_DIMM, @@ -578,7 +578,7 @@ static const struct dynamic_odt dual_DS[4] = { {0, 0, 0, 0} }; -static const struct dynamic_odt dual_SD[4] = { +static __maybe_unused const struct dynamic_odt dual_SD[4] = { { /* cs0 */ FSL_DDR_ODT_OTHER_DIMM, FSL_DDR_ODT_OTHER_DIMM, @@ -600,7 +600,7 @@ static const struct dynamic_odt dual_SD[4] = { } }; -static const struct dynamic_odt dual_SS[4] = { +static __maybe_unused const struct dynamic_odt dual_SS[4] = { { /* cs0 */ FSL_DDR_ODT_OTHER_DIMM, FSL_DDR_ODT_OTHER_DIMM, @@ -617,7 +617,7 @@ static const struct dynamic_odt dual_SS[4] = { {0, 0, 0, 0} }; -static const struct dynamic_odt dual_D0[4] = { +static __maybe_unused const struct dynamic_odt dual_D0[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_ALL, @@ -634,7 +634,7 @@ static const struct dynamic_odt dual_D0[4] = { {0, 0, 0, 0} }; -static const struct dynamic_odt dual_0D[4] = { +static __maybe_unused const struct dynamic_odt dual_0D[4] = { {0, 0, 0, 0}, {0, 0, 0, 0}, { /* cs2 */ @@ -651,7 +651,7 @@ static const struct dynamic_odt dual_0D[4] = { } }; -static const struct dynamic_odt dual_S0[4] = { +static __maybe_unused const struct dynamic_odt dual_S0[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_CS, @@ -664,7 +664,7 @@ static const struct dynamic_odt dual_S0[4] = { }; -static const struct dynamic_odt dual_0S[4] = { +static __maybe_unused const struct dynamic_odt dual_0S[4] = { {0, 0, 0, 0}, {0, 0, 0, 0}, { /* cs2 */ @@ -677,7 +677,7 @@ static const struct dynamic_odt dual_0S[4] = { }; -static const struct dynamic_odt odt_unknown[4] = { +static __maybe_unused const struct dynamic_odt odt_unknown[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, FSL_DDR_ODT_CS, diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index eb789f5bff4..13ec0e63b10 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -589,7 +589,7 @@ static int bus_i2c_write(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr, #endif static struct mxc_i2c_bus mxc_i2c_buses[] = { -#if defined(CONFIG_LS102XA) || defined(CONFIG_VF610) || \ +#if defined(CONFIG_ARCH_LS1021A) || defined(CONFIG_VF610) || \ defined(CONFIG_FSL_LAYERSCAPE) { 0, I2C1_BASE_ADDR, I2C_QUIRK_FLAG }, { 1, I2C2_BASE_ADDR, I2C_QUIRK_FLAG }, diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index fa96bad902d..fc7a6da03bc 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -34,5 +34,5 @@ obj-$(CONFIG_ARCH_T4240) += t4240.o obj-$(CONFIG_ARCH_T4160) += t4240.o obj-$(CONFIG_ARCH_B4420) += b4860.o obj-$(CONFIG_ARCH_B4860) += b4860.o -obj-$(CONFIG_LS1043A) += ls1043.o +obj-$(CONFIG_ARCH_LS1043A) += ls1043.o obj-$(CONFIG_ARCH_LS1046A) += ls1046.o diff --git a/drivers/net/ldpaa_eth/Makefile b/drivers/net/ldpaa_eth/Makefile index 5587aa618df..08675ec6416 100644 --- a/drivers/net/ldpaa_eth/Makefile +++ b/drivers/net/ldpaa_eth/Makefile @@ -6,4 +6,4 @@ obj-y += ldpaa_wriop.o obj-y += ldpaa_eth.o -obj-$(CONFIG_LS2080A) += ls2080a.o +obj-$(CONFIG_ARCH_LS2080A) += ls2080a.o diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 4231594776a..4f0a27892f2 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -13,7 +13,7 @@ #include <asm/io.h> #include <linux/immap_qe.h> #include <fsl_qe.h> -#ifdef CONFIG_LS102XA +#ifdef CONFIG_ARCH_LS1021A #include <asm/arch/immap_ls102xa.h> #endif @@ -355,7 +355,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware) size_t length; const struct qe_header *hdr; #ifdef CONFIG_DEEP_SLEEP -#ifdef CONFIG_LS102XA +#ifdef CONFIG_ARCH_LS1021A struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; #else ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -494,7 +494,7 @@ int u_qe_upload_firmware(const struct qe_firmware *firmware) size_t length; const struct qe_header *hdr; #ifdef CONFIG_DEEP_SLEEP -#ifdef CONFIG_LS102XA +#ifdef CONFIG_ARCH_LS1021A struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; #else ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); diff --git a/drivers/usb/common/fsl-errata.c b/drivers/usb/common/fsl-errata.c index 6069c935c12..338ac08d8a7 100644 --- a/drivers/usb/common/fsl-errata.c +++ b/drivers/usb/common/fsl-errata.c @@ -204,7 +204,7 @@ bool has_erratum_a010151(void) case SVR_LS1043A: return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1); #endif -#ifdef CONFIG_LS102XA +#ifdef CONFIG_ARCH_LS1021A case SOC_VER_LS1020: case SOC_VER_LS1021: case SOC_VER_LS1022: diff --git a/include/config_fsl_chain_trust.h b/include/config_fsl_chain_trust.h index eb45e9851f0..40d323e0044 100644 --- a/include/config_fsl_chain_trust.h +++ b/include/config_fsl_chain_trust.h @@ -81,17 +81,18 @@ "setenv bs_size " __stringify(CONFIG_BS_SIZE)";" /* For secure boot flow, default environment used will be used */ -#if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) +#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_NAND_BOOT) || \ + defined(CONFIG_SD_BOOT) +#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_NAND_BOOT) #define CONFIG_BS_COPY_CMD \ "nand read $bs_hdr_ram $bs_hdr_device $bs_hdr_size ;" \ "nand read $bs_ram $bs_device $bs_size ;" -#endif /* CONFIG_RAMBOOT_NAND */ #elif defined(CONFIG_SD_BOOT) #define CONFIG_BS_COPY_CMD \ "mmc read $bs_hdr_ram $bs_hdr_device $bs_hdr_size ;" \ "mmc read $bs_ram $bs_device $bs_size ;" -#else /* CONFIG_SD_BOOT */ +#endif +#else #define CONFIG_BS_COPY_CMD \ "cp.b $bs_hdr_device $bs_hdr_ram $bs_hdr_size ;" \ "cp.b $bs_device $bs_ram $bs_size ;" diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 1a0c7f8e5f9..09f890d55c3 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -123,6 +123,4 @@ #define CONFIG_PANIC_HANG #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -#include <asm/fsl_secure_boot.h> - #endif /* __LS1012A_COMMON_H */ diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index 70d3a71eb37..276fe1050cf 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -74,4 +74,7 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#include <asm/fsl_secure_boot.h> + #endif /* __LS1012ARDB_H__ */ diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index d8bbc802d2d..35d17b96f4a 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -7,8 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_LS102XA - #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR #define CONFIG_SYS_FSL_CLK diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 97b81274b05..c3224c8c3f4 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -7,8 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_LS102XA - #define CONFIG_ARMV7_PSCI_1_0 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index a60b4b29902..1d0b4698bbf 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -7,8 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_LS102XA - #define CONFIG_ARMV7_PSCI_1_0 #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 46d54a0f0d0..e26924877d1 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -7,9 +7,27 @@ #ifndef __LS1043A_COMMON_H #define __LS1043A_COMMON_H +/* SPL build */ +#ifdef CONFIG_SPL_BUILD +#define SPL_NO_FMAN +#define SPL_NO_DSPI +#define SPL_NO_PCIE +#define SPL_NO_ENV +#define SPL_NO_MISC +#define SPL_NO_USB +#define SPL_NO_SATA +#define SPL_NO_QE +#define SPL_NO_EEPROM +#endif +#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT)) +#define SPL_NO_MMC +#endif +#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT)) +#define SPL_NO_IFC +#endif + #define CONFIG_REMAKE_ELF #define CONFIG_FSL_LAYERSCAPE -#define CONFIG_LS1043A #define CONFIG_MP #define CONFIG_GICV2 @@ -52,7 +70,7 @@ #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_TEXT_BASE 0x10000000 -#define CONFIG_SPL_MAX_SIZE 0x1d000 +#define CONFIG_SPL_MAX_SIZE 0x17000 #define CONFIG_SPL_STACK 0x1001e000 #define CONFIG_SPL_PAD_TO 0x1d000 @@ -61,7 +79,19 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_MONITOR_LEN 0xa0000 + +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) +/* + * HDR would be appended at end of image and copied to DDR along + * with U-Boot image. Here u-boot max. size is 512K. So if binary + * size increases then increase this size in case of secure boot as + * it uses raw u-boot image instead of fit image. + */ +#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) +#else +#define CONFIG_SYS_MONITOR_LEN 0x100000 +#endif /* ifdef CONFIG_SECURE_BOOT */ #endif /* NAND SPL */ @@ -79,10 +109,27 @@ #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_MONITOR_LEN 0xa0000 + +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) +#endif /* ifdef CONFIG_SECURE_BOOT */ + +#ifdef CONFIG_U_BOOT_HDR_SIZE +/* + * HDR would be appended at end of image and copied to DDR along + * with U-Boot image. Here u-boot max. size is 512K. So if binary + * size increases then increase this size in case of secure boot as + * it uses raw u-boot image instead of fit image. + */ +#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) +#else +#define CONFIG_SYS_MONITOR_LEN 0x100000 +#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ + #endif /* IFC */ +#ifndef SPL_NO_IFC #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_FSL_IFC /* @@ -103,6 +150,7 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ #endif #endif +#endif /* I2C */ #define CONFIG_SYS_I2C @@ -113,6 +161,7 @@ #define CONFIG_SYS_I2C_MXC_I2C4 /* PCIe */ +#ifndef SPL_NO_PCIE #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ @@ -122,17 +171,23 @@ #define CONFIG_PCI_SCAN_SHOW #define CONFIG_CMD_PCI #endif +#endif /* Command line configuration */ +#ifndef SPL_NO_ENV #define CONFIG_CMD_ENV +#endif /* MMC */ +#ifndef SPL_NO_MMC #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #endif +#endif /* DSPI */ +#ifndef SPL_NO_DSPI #define CONFIG_FSL_DSPI #ifdef CONFIG_FSL_DSPI #define CONFIG_DM_SPI_FLASH @@ -144,8 +199,10 @@ #define CONFIG_SF_DEFAULT_CS 0 #endif #endif +#endif /* FMan ucode */ +#ifndef SPL_NO_FMAN #define CONFIG_SYS_DPAA_FMAN #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 @@ -177,6 +234,7 @@ #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif +#endif /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) @@ -184,6 +242,7 @@ #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 +#ifndef SPL_NO_MISC #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define MTDPARTS_DEFAULT "mtdparts=spi0.0:1m(uboot)," \ "5m(kernel),1m(dtb),9m(file_system)" @@ -224,6 +283,7 @@ #define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ "$kernel_size && bootm $kernel_load" #endif +#endif /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ @@ -231,7 +291,11 @@ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_SYS_LONGHELP + +#ifndef SPL_NO_MISC #define CONFIG_CMDLINE_EDITING 1 +#endif + #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64 /* max command args */ diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index f185380ae3d..5e570cd5e8d 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -90,7 +90,9 @@ /* * NAND Flash Definitions */ +#ifndef SPL_NO_IFC #define CONFIG_NAND_FSL_IFC +#endif #define CONFIG_SYS_NAND_BASE 0x7e800000 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE @@ -134,7 +136,7 @@ #ifdef CONFIG_NAND_BOOT #define CONFIG_SPL_PAD_TO 0x20000 /* block aligned */ #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO -#define CONFIG_SYS_NAND_U_BOOT_SIZE (640 << 10) +#define CONFIG_SYS_NAND_U_BOOT_SIZE (1024 << 10) #endif /* @@ -213,6 +215,7 @@ #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_CPLD_FTIM3 /* EEPROM */ +#ifndef SPL_NO_EEPROM #define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 @@ -220,11 +223,14 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 +#endif /* * Environment */ +#ifndef SPL_NO_ENV #define CONFIG_ENV_OVERWRITE +#endif #if defined(CONFIG_NAND_BOOT) #define CONFIG_ENV_IS_IN_NAND @@ -243,6 +249,7 @@ #endif /* FMan */ +#ifndef SPL_NO_FMAN #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_FMAN_ENET #define CONFIG_PHYLIB @@ -266,23 +273,29 @@ #define CONFIG_ETHPRIME "FM1@DTSEC3" #endif +#endif /* QE */ +#ifndef SPL_NO_QE #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ !defined(CONFIG_QSPI_BOOT) #define CONFIG_U_QE #endif #define CONFIG_SYS_QE_FW_ADDR 0x60600000 +#endif /* USB */ +#ifndef SPL_NO_USB #define CONFIG_HAS_FSL_XHCI_USB #ifdef CONFIG_HAS_FSL_XHCI_USB #define CONFIG_USB_XHCI_FSL #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #endif +#endif /* SATA */ +#ifndef SPL_NO_SATA #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_CMD_SCSI @@ -299,6 +312,7 @@ #define SCSI_VEND_ID 0x1b4b #define SCSI_DEV_ID 0x9170 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} +#endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index cb792961b8b..957ffd36347 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -7,6 +7,23 @@ #ifndef __LS1046A_COMMON_H #define __LS1046A_COMMON_H +/* SPL build */ +#ifdef CONFIG_SPL_BUILD +#define SPL_NO_QBMAN +#define SPL_NO_FMAN +#define SPL_NO_ENV +#define SPL_NO_MISC +#define SPL_NO_QSPI +#define SPL_NO_USB +#define SPL_NO_SATA +#endif +#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT)) +#define SPL_NO_MMC +#endif +#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT)) +#define SPL_NO_IFC +#endif + #define CONFIG_REMAKE_ELF #define CONFIG_FSL_LAYERSCAPE #define CONFIG_MP @@ -68,7 +85,19 @@ #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SYS_MONITOR_LEN 0xa0000 + +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) +/* + * HDR would be appended at end of image and copied to DDR along + * with U-Boot image. Here u-boot max. size is 512K. So if binary + * size increases then increase this size in case of secure boot as + * it uses raw u-boot image instead of fit image. + */ +#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) +#else +#define CONFIG_SYS_MONITOR_LEN 0x100000 +#endif /* ifdef CONFIG_SECURE_BOOT */ #endif /* NAND SPL */ @@ -88,7 +117,7 @@ #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x10000000 -#define CONFIG_SPL_MAX_SIZE 0x1d000 /* 116 KiB */ +#define CONFIG_SPL_MAX_SIZE 0x17000 /* 90 KiB */ #define CONFIG_SPL_STACK 0x1001f000 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE @@ -110,20 +139,28 @@ #define CONFIG_SYS_I2C_MXC_I2C4 /* Command line configuration */ +#ifndef SPL_NO_ENV #define CONFIG_CMD_ENV +#endif /* MMC */ +#ifndef SPL_NO_MMC #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #endif +#endif +#ifndef SPL_NO_QBMAN #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#endif /* FMan ucode */ +#ifndef SPL_NO_FMAN #define CONFIG_SYS_DPAA_FMAN #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#endif #ifdef CONFIG_SD_BOOT /* @@ -157,6 +194,7 @@ #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 +#ifndef SPL_NO_MISC /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ @@ -174,13 +212,19 @@ #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ "earlycon=uart8250,mmio,0x21c0500 " \ MTDPARTS_DEFAULT +#endif + /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_SYS_LONGHELP + +#ifndef SPL_NO_MISC #define CONFIG_CMDLINE_EDITING 1 +#endif + #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64 /* max command args */ diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 2141b8299aa..67ee62608cd 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -51,13 +51,14 @@ #endif #endif +#ifndef SPL_NO_IFC /* IFC */ #define CONFIG_FSL_IFC - /* * NAND Flash Definitions */ #define CONFIG_NAND_FSL_IFC +#endif #define CONFIG_SYS_NAND_BASE 0x7e800000 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE @@ -161,7 +162,9 @@ /* * Environment */ +#ifndef SPL_NO_ENV #define CONFIG_ENV_OVERWRITE +#endif #if defined(CONFIG_SD_BOOT) #define CONFIG_ENV_IS_IN_MMC @@ -176,6 +179,7 @@ #endif /* FMan */ +#ifndef SPL_NO_FMAN #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_FMAN_ENET #define CONFIG_PHYLIB @@ -196,16 +200,20 @@ #define CONFIG_ETHPRIME "FM1@DTSEC3" #endif +#endif /* QSPI device */ +#ifndef SPL_NO_QSPI #ifdef CONFIG_FSL_QSPI #define CONFIG_SPI_FLASH_SPANSION #define FSL_QSPI_FLASH_SIZE (1 << 26) #define FSL_QSPI_FLASH_NUM 2 #define CONFIG_SPI_FLASH_BAR #endif +#endif /* USB */ +#ifndef SPL_NO_USB #define CONFIG_HAS_FSL_XHCI_USB #ifdef CONFIG_HAS_FSL_XHCI_USB #define CONFIG_USB_XHCI_HCD @@ -216,8 +224,10 @@ #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #endif +#endif /* SATA */ +#ifndef SPL_NO_SATA #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT @@ -229,7 +239,9 @@ #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) +#endif +#ifndef SPL_NO_MISC #define CONFIG_BOOTCOMMAND "sf probe 0:0;sf read $kernel_load" \ "$kernel_start $kernel_size;" \ "bootm $kernel_load" @@ -238,5 +250,8 @@ "15m(u-boot),48m(kernel.itb);" \ "7e800000.flash:16m(nand_uboot)," \ "48m(nand_kernel),448m(nand_free)" +#endif + +#include <asm/fsl_secure_boot.h> #endif /* __LS1046ARDB_H__ */ diff --git a/include/fsl_errata.h b/include/fsl_errata.h index 8441f91029c..89051aa7412 100644 --- a/include/fsl_errata.h +++ b/include/fsl_errata.h @@ -10,7 +10,7 @@ #include <common.h> #if defined(CONFIG_PPC) #include <asm/processor.h> -#elif defined(CONFIG_LS102XA) +#elif defined(CONFIG_ARCH_LS1021A) #include <asm/arch-ls102xa/immap_ls102xa.h> #elif defined(CONFIG_FSL_LAYERSCAPE) #include <asm/arch/soc.h> @@ -66,7 +66,7 @@ static inline bool has_erratum_a008378(void) switch (soc) { -#ifdef CONFIG_LS102XA +#ifdef CONFIG_ARCH_LS1021A case SOC_VER_LS1020: case SOC_VER_LS1021: case SOC_VER_LS1022: diff --git a/include/linux/immap_qe.h b/include/linux/immap_qe.h index 6d1f88ec2e1..d952efa8f45 100644 --- a/include/linux/immap_qe.h +++ b/include/linux/immap_qe.h @@ -24,7 +24,7 @@ #endif #endif -#ifdef CONFIG_LS102XA +#ifdef CONFIG_ARCH_LS1021A #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h index 1fa31613bbd..bd54089722f 100644 --- a/include/linux/usb/xhci-fsl.h +++ b/include/linux/usb/xhci-fsl.h @@ -54,15 +54,15 @@ struct fsl_xhci { struct dwc3 *dwc3_reg; }; -#if defined(CONFIG_LS102XA) || defined(CONFIG_ARCH_LS1012A) +#if defined(CONFIG_ARCH_LS1021A) || defined(CONFIG_ARCH_LS1012A) #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0 #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0 -#elif defined(CONFIG_LS2080A) +#elif defined(CONFIG_ARCH_LS2080A) #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0 -#elif defined(CONFIG_LS1043A) || defined(CONFIG_ARCH_LS1046A) +#elif defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR #define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_XHCI_USB3_ADDR diff --git a/include/tsec.h b/include/tsec.h index fb27edf2250..e99a7fa8782 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -20,7 +20,7 @@ #ifndef CONFIG_DM_ETH -#ifdef CONFIG_LS102XA +#ifdef CONFIG_ARCH_LS1021A #define TSEC_SIZE 0x40000 #define TSEC_MDIO_OFFSET 0x40000 #else diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h index 882aed4a5f0..8f3437a208c 100644 --- a/include/usb/ehci-ci.h +++ b/include/usb/ehci-ci.h @@ -159,7 +159,7 @@ #elif defined(CONFIG_MPC512X) #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC512x_USB1_ADDR #define CONFIG_SYS_FSL_USB2_ADDR 0 -#elif defined(CONFIG_LS102XA) +#elif defined(CONFIG_ARCH_LS1021A) #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_EHCI_USB1_ADDR #define CONFIG_SYS_FSL_USB2_ADDR 0 #endif diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index d487be72ffd..5e515d215c1 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1697,10 +1697,7 @@ CONFIG_LPC_IO_BASE CONFIG_LPUART CONFIG_LPUART_32B_REG CONFIG_LQ038J7DH53 -CONFIG_LS102XA CONFIG_LS102XA_STREAM_ID -CONFIG_LS1043A -CONFIG_LS2080A CONFIG_LSCHLV2 CONFIG_LSXHL CONFIG_LUAN |