summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTom Rini <trini@konsulko.com>2019-06-11 17:22:22 -0400
committerTom Rini <trini@konsulko.com>2019-06-11 17:22:22 -0400
commit2702646bc083c7916aedc8c5eef81948c5c3864f (patch)
treea72dd867e47f10733d47306ea3afd0ab9da98fc4
parent529faf80c339b78bd361b59735664f2605322b8e (diff)
parentf90b3f5b68ed5e8d7f84aba0550d24326693524d (diff)
Merge tag 'u-boot-stm32-20190606' of https://github.com/pchotard/u-boot
- Add Ethernet support for STM32MP1 - Add saveenv support for STM32MP1 - Add STM32MP1 Avenger96 board support - Add SPI driver suport for STM32MP1 - Add watchdog support for STM32MP1 - Update power supply check via USB TYPE-C for STM32MP1 discovery board
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/arm/dts/Makefile1
-rw-r--r--arch/arm/dts/stm32mp157-pinctrl.dtsi116
-rw-r--r--arch/arm/dts/stm32mp157-u-boot.dtsi4
-rw-r--r--arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi191
-rw-r--r--arch/arm/dts/stm32mp157a-avenger96.dts362
-rw-r--r--arch/arm/dts/stm32mp157c-ev1.dts18
-rw-r--r--arch/arm/dts/stm32mp157c.dtsi31
-rw-r--r--arch/arm/mach-stm32mp/Kconfig3
-rw-r--r--arch/arm/mach-stm32mp/cpu.c2
-rw-r--r--board/st/stm32mp1/README23
-rw-r--r--board/st/stm32mp1/stm32mp1.c273
-rw-r--r--cmd/nvedit.c36
-rw-r--r--configs/stm32mp15_basic_defconfig33
-rw-r--r--configs/stm32mp15_trusted_defconfig33
-rw-r--r--drivers/clk/clk_stm32mp1.c9
-rw-r--r--drivers/mtd/mtd_uboot.c5
-rw-r--r--drivers/net/dwc_eth_qos.c435
-rw-r--r--drivers/spi/Kconfig8
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/stm32_spi.c615
-rw-r--r--drivers/watchdog/Kconfig101
-rw-r--r--drivers/watchdog/Makefile1
-rw-r--r--drivers/watchdog/stm32mp_wdt.c135
-rw-r--r--env/Kconfig18
-rw-r--r--env/ext4.c34
-rw-r--r--include/configs/stm32mp1.h33
27 files changed, 2352 insertions, 171 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 190050c99cd..56bc543cdac 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -313,6 +313,8 @@ F: drivers/ram/stm32mp1/
F: drivers/misc/stm32_rcc.c
F: drivers/reset/stm32-reset.c
F: drivers/spi/stm32_qspi.c
+F: drivers/spi/stm32_spi.c
+F: drivers/watchdog/stm32mp_wdt.c
ARM STM STV0991
M: Vikas Manocha <vikas.manocha@st.com>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 3d319663800..528fb909d5b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -757,6 +757,7 @@ dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
dtb-$(CONFIG_TARGET_STM32MP1) += \
stm32mp157a-dk1.dtb \
+ stm32mp157a-avenger96.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb
diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi
index 0aae69b0a04..4c424c488d3 100644
--- a/arch/arm/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi
@@ -173,13 +173,18 @@
<STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
<STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
<STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
- <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
<STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
bias-disable;
drive-push-pull;
- slew-rate = <3>;
+ slew-rate = <2>;
};
pins2 {
+ pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
<STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
<STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
@@ -210,6 +215,50 @@
};
};
+ fmc_pins_a: fmc-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+ <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+ <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+ <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+ <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+ bias-pull-up;
+ };
+ };
+
+ fmc_sleep_pins_a: fmc-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+ <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
+ <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
+ <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+ <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
+ <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
+ };
+ };
+
i2c1_pins_a: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
@@ -220,6 +269,16 @@
};
};
+ i2c1_pins_b: i2c1-1 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
i2c2_pins_a: i2c2-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
@@ -230,6 +289,16 @@
};
};
+ i2c2_pins_b: i2c2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 0, AF3)>, /* I2C2_SCL */
+ <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
i2c5_pins_a: i2c5-0 {
pins {
pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
@@ -375,6 +444,21 @@
};
};
+ spi2_pins_a: spi2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
+ <STM32_PINMUX('I', 0, AF5)>, /* SPI2_NSS */
+ <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
+ bias-disable;
+ };
+ };
+
stusb1600_pins_a: stusb1600-0 {
pins {
pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
@@ -395,6 +479,34 @@
};
};
+ uart4_pins_b: uart4-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart7_pins_a: uart7-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
+ <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
+ <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+ bias-disable;
+ };
+ };
+
usbotg_hs_pins_a: usbotg_hs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
diff --git a/arch/arm/dts/stm32mp157-u-boot.dtsi b/arch/arm/dts/stm32mp157-u-boot.dtsi
index ab6f673ea24..09560e2d915 100644
--- a/arch/arm/dts/stm32mp157-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157-u-boot.dtsi
@@ -140,3 +140,7 @@
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
+
+&iwdg2 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
new file mode 100644
index 00000000000..1ff681afb87
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright : STMicroelectronics 2018
+ *
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp157-u-boot.dtsi"
+#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
+
+/ {
+ aliases {
+ mmc0 = &sdmmc1;
+ mmc1 = &sdmmc2;
+ usb0 = &usbotg_hs;
+ };
+
+ config {
+ u-boot,boot-led = "led1";
+ u-boot,error-led = "led4";
+ };
+};
+
+&i2c4 {
+ u-boot,dm-pre-reloc;
+};
+
+&i2c4_pins_a {
+ u-boot,dm-pre-reloc;
+ pins {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&pmic {
+ u-boot,dm-pre-reloc;
+};
+
+&rcc {
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_MCU_PLL3P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 0 /*MCU*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_DISABLED
+ CLK_SDMMC12_PLL4P
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL4P
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL4P
+ CLK_FDCAN_PLL4Q
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_LSI
+ CLK_RNG2_LSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_LSE
+ >;
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1: st,pll@0 {
+ cfg = < 2 80 0 0 0 PQR(1,0,0) >;
+ frac = < 0x800 >;
+ u-boot,dm-pre-reloc;
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll@1 {
+ cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+ frac = < 0x1400 >;
+ u-boot,dm-pre-reloc;
+ };
+
+ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
+ pll3: st,pll@2 {
+ cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+ frac = < 0x1a04 >;
+ u-boot,dm-pre-reloc;
+ };
+
+ /* VCO = 480.0 MHz => P = 120, Q = 40, R = 96 */
+ pll4: st,pll@3 {
+ cfg = < 1 39 3 11 4 PQR(1,1,1) >;
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&sdmmc1 {
+ u-boot,dm-spl;
+};
+
+&sdmmc1_b4_pins_a {
+ u-boot,dm-spl;
+ pins {
+ u-boot,dm-spl;
+ };
+};
+
+&sdmmc1_dir_pins_a {
+ u-boot,dm-spl;
+ pins {
+ u-boot,dm-spl;
+ };
+};
+
+&sdmmc2 {
+ u-boot,dm-spl;
+};
+
+&sdmmc2_b4_pins_a {
+ u-boot,dm-spl;
+ pins {
+ u-boot,dm-spl;
+ };
+};
+
+&sdmmc2_d47_pins_a {
+ u-boot,dm-spl;
+ pins {
+ u-boot,dm-spl;
+ };
+};
+
+&uart4 {
+ u-boot,dm-pre-reloc;
+};
+
+&uart4_pins_b {
+ u-boot,dm-pre-reloc;
+ pins1 {
+ u-boot,dm-pre-reloc;
+ };
+ pins2 {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&usbotg_hs {
+ u-boot,force-b-session-valid;
+ hnp-srp-disable;
+};
+
+&v3v3 {
+ regulator-always-on;
+};
diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts
new file mode 100644
index 00000000000..dd0859769bf
--- /dev/null
+++ b/arch/arm/dts/stm32mp157a-avenger96.dts
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ *
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+ model = "Arrow Electronics STM32MP157A Avenger96 board";
+ compatible = "st,stm32mp157a-avenger96", "st,stm32mp157";
+
+ aliases {
+ ethernet0 = &ethernet0;
+ serial0 = &uart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@c0000000 {
+ reg = <0xc0000000 0x40000000>;
+ };
+
+ led {
+ compatible = "gpio-leds";
+ led1 {
+ label = "green:user1";
+ gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led2 {
+ label = "green:user2";
+ gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "green:user3";
+ gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led4 {
+ label = "green:user3";
+ gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ panic-indicator;
+ };
+
+ led5 {
+ label = "yellow:wifi";
+ gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ led6 {
+ label = "blue:bt";
+ gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "bluetooth-power";
+ default-state = "off";
+ };
+ };
+};
+
+&ethernet0 {
+ status = "okay";
+ pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+ pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rgmii";
+ max-speed = <1000>;
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@7 {
+ reg = <7>;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_b>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_b>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ st,main-control-register = <0x04>;
+ st,vin-control-register = <0xc0>;
+ st,usb-control-register = <0x30>;
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <2>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <2>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ st,mask_reset;
+ regulator-initial-mode = <8>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <8>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO1 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ v2v8: ldo2 {
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ interrupts = <IT_CURLIM_LDO2 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <0000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ interrupt-parent = <&pmic>;
+ regulator-boot-on;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ interrupts = <IT_CURLIM_LDO6 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ interrupt-parent = <&pmic>;
+ regulator-active-discharge;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ interrupts = <IT_OCP_SWOUT 0>;
+ interrupt-parent = <&pmic>;
+ regulator-active-discharge;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&pwr {
+ pwr-supply = <&vdd>;
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+ broken-cd;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ status = "okay";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ st,neg-edge;
+ bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ mmc-ddr-3_3v;
+ status = "okay";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_b>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+};
+
+&usbh_ehci {
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "peripheral";
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
index a6ee37924fe..663e52aa314 100644
--- a/arch/arm/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/dts/stm32mp157c-ev1.dts
@@ -78,7 +78,7 @@
pinctrl-0 = <&ethernet0_rgmii_pins_a>;
pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
pinctrl-names = "default", "sleep";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
max-speed = <1000>;
phy-handle = <&phy0>;
@@ -92,6 +92,22 @@
};
};
+&fmc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&fmc_pins_a>;
+ pinctrl-1 = <&fmc_sleep_pins_a>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand: nand@0 {
+ reg = <0>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp157c.dtsi
index 94634336a5e..73215855ccd 100644
--- a/arch/arm/dts/stm32mp157c.dtsi
+++ b/arch/arm/dts/stm32mp157c.dtsi
@@ -1033,6 +1033,21 @@
dma-requests = <48>;
};
+ fmc: nand-controller@58002000 {
+ compatible = "st,stm32mp15-fmc2";
+ reg = <0x58002000 0x1000>,
+ <0x80000000 0x1000>,
+ <0x88010000 0x1000>,
+ <0x88020000 0x1000>,
+ <0x81000000 0x1000>,
+ <0x89010000 0x1000>,
+ <0x89020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ status = "disabled";
+ };
+
qspi: spi@58003000 {
compatible = "st,stm32f469-qspi";
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
@@ -1087,21 +1102,25 @@
compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
reg = <0x5800a000 0x2000>;
reg-names = "stmmaceth";
- interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
+ interrupts-extended =
+ <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 70 1>;
+ interrupt-names = "macirq",
+ "eth_wake_irq",
+ "stm32_pwr_wakeup";
clock-names = "stmmaceth",
"mac-clk-tx",
"mac-clk-rx",
- "ethstp",
- "syscfg-clk";
+ "ethstp";
clocks = <&rcc ETHMAC>,
<&rcc ETHTX>,
<&rcc ETHRX>,
- <&rcc ETHSTP>,
- <&rcc SYSCFG>;
+ <&rcc ETHSTP>;
st,syscon = <&syscfg 0x4>;
snps,mixed-burst;
snps,pbl = <2>;
+ snps,en-tx-lpi-clockgating;
snps,axi-config = <&stmmac_axi_config_0>;
snps,tso;
status = "disabled";
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 77f66c65c03..d9ad6b423b0 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -17,6 +17,7 @@ config SPL
select SPL_DM_RESET
select SPL_SERIAL_SUPPORT
select SPL_SYSCON
+ select SPL_WATCHDOG_SUPPORT
imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
imply SPL_BOOTSTAGE if BOOTSTAGE
imply SPL_DISPLAY_PRINT
@@ -29,7 +30,7 @@ config SYS_MALLOC_LEN
default 0x2000000
config ENV_SIZE
- default 0x1000
+ default 0x2000
config TARGET_STM32MP1
bool "Support stm32mp1xx"
diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c
index 7b4431c9c75..e1a0a136809 100644
--- a/arch/arm/mach-stm32mp/cpu.c
+++ b/arch/arm/mach-stm32mp/cpu.c
@@ -481,7 +481,7 @@ static int setup_mac_address(void)
enetaddr[i] = ((uint8_t *)&otp)[i];
if (!is_valid_ethaddr(enetaddr)) {
- pr_err("invalid MAC address in OTP %pM", enetaddr);
+ pr_err("invalid MAC address in OTP %pM\n", enetaddr);
return -EINVAL;
}
pr_debug("OTP MAC address = %pM\n", enetaddr);
diff --git a/board/st/stm32mp1/README b/board/st/stm32mp1/README
index 1cd3534ae4e..b0c83250612 100644
--- a/board/st/stm32mp1/README
+++ b/board/st/stm32mp1/README
@@ -37,6 +37,7 @@ Currently the following boards are supported:
+ stm32mp157c-ed1
+ stm32mp157a-dk1
+ stm32mp157c-dk2
++ stm32mp157a-avenger96
3. Boot Sequences
=================
@@ -84,6 +85,9 @@ the supported device trees for stm32mp157 are:
+ dk2: Discovery board = dk1 with a BT/WiFI combo and a DSI panel
dts: stm32mp157c-dk2
++ avenger96: Avenger96 board from Arrow Electronics
+ dts: stm32mp157a-avenger96
+
5. Build Procedure
==================
@@ -140,6 +144,11 @@ the supported device trees for stm32mp157 are:
# make stm32mp15_basic_defconfig
# make DEVICE_TREE=stm32mp157c-dk2 all
+ d) basic boot on avenger96
+ # export KBUILD_OUTPUT=stm32mp15_basic
+ # make stm32mp15_basic_defconfig
+ # make DEVICE_TREE=stm32mp157a-avenger96 all
+
6. Output files
BootRom and TF-A expect binaries with STM32 image header
@@ -182,6 +191,20 @@ You can select the boot mode, on the board ed1 with the switch SW1
SD-Card 1 1
Recovery 0 0
+- Boot mode of Avenger96 can be selected using switch S3
+
+ -----------------------------------
+ Boot Mode BOOT2 BOOT1 BOOT0
+ -----------------------------------
+ Recovery 0 0 0
+ NOR 0 0 1
+ SD-Card 1 0 1
+ eMMC 0 1 0
+ NAND 0 1 1
+ Reserved 1 0 0
+ Recovery 1 1 0
+ SD-Card 1 1 1
+
Recovery is a boot from serial link (UART/USB) and it is used with
STM32CubeProgrammer tool to load executable in RAM and to update the flash
devices available on the board (NOR/NAND/eMMC/SDCARD).
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 76917b022ed..776929350f9 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -7,6 +7,7 @@
#include <config.h>
#include <clk.h>
#include <dm.h>
+#include <environment.h>
#include <g_dnl.h>
#include <generic-phy.h>
#include <i2c.h>
@@ -19,6 +20,7 @@
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/stm32.h>
+#include <asm/arch/sys_proto.h>
#include <power/regulator.h>
#include <usb/dwc2_udc.h>
@@ -51,18 +53,19 @@
#define SYSCFG_PMCSETR_ETH_SELMII BIT(20)
#define SYSCFG_PMCSETR_ETH_SEL_MASK GENMASK(23, 21)
-#define SYSCFG_PMCSETR_ETH_SEL_GMII_MII (0 << 21)
-#define SYSCFG_PMCSETR_ETH_SEL_RGMII (1 << 21)
-#define SYSCFG_PMCSETR_ETH_SEL_RMII (4 << 21)
+#define SYSCFG_PMCSETR_ETH_SEL_GMII_MII 0
+#define SYSCFG_PMCSETR_ETH_SEL_RGMII BIT(21)
+#define SYSCFG_PMCSETR_ETH_SEL_RMII BIT(23)
/*
* Get a global data pointer
*/
DECLARE_GLOBAL_DATA_PTR;
+#define USB_LOW_THRESHOLD_UV 200000
#define USB_WARNING_LOW_THRESHOLD_UV 660000
#define USB_START_LOW_THRESHOLD_UV 1230000
-#define USB_START_HIGH_THRESHOLD_UV 2100000
+#define USB_START_HIGH_THRESHOLD_UV 2150000
int checkboard(void)
{
@@ -263,9 +266,10 @@ static int board_check_usb_power(void)
ofnode node;
unsigned int raw;
int max_uV = 0;
+ int min_uV = USB_START_HIGH_THRESHOLD_UV;
int ret, uV, adc_count;
- u8 i, nb_blink;
-
+ u32 nb_blink;
+ u8 i;
node = ofnode_path("/config");
if (!ofnode_valid(node)) {
debug("%s: no /config node?\n", __func__);
@@ -317,6 +321,8 @@ static int board_check_usb_power(void)
if (!adc_raw_to_uV(adc, raw, &uV)) {
if (uV > max_uV)
max_uV = uV;
+ if (uV < min_uV)
+ min_uV = uV;
pr_debug("%s: %s[%02d] = %u, %d uV\n", __func__,
adc->name, adc_args.args[0], raw, uV);
} else {
@@ -331,27 +337,66 @@ static int board_check_usb_power(void)
* continue.
*/
if (max_uV > USB_START_LOW_THRESHOLD_UV &&
- max_uV < USB_START_HIGH_THRESHOLD_UV)
+ max_uV <= USB_START_HIGH_THRESHOLD_UV &&
+ min_uV <= USB_LOW_THRESHOLD_UV)
return 0;
- /* Display warning message and make u-boot,error-led blinking */
- pr_err("\n*******************************************\n");
+ pr_err("****************************************************\n");
+
+ /*
+ * If highest and lowest value are either both below
+ * USB_LOW_THRESHOLD_UV or both above USB_LOW_THRESHOLD_UV, that
+ * means USB TYPE-C is in unattached mode, this is an issue, make
+ * u-boot,error-led blinking and stop boot process.
+ */
+ if ((max_uV > USB_LOW_THRESHOLD_UV &&
+ min_uV > USB_LOW_THRESHOLD_UV) ||
+ (max_uV <= USB_LOW_THRESHOLD_UV &&
+ min_uV <= USB_LOW_THRESHOLD_UV)) {
+ pr_err("* ERROR USB TYPE-C connection in unattached mode *\n");
+ pr_err("* Check that USB TYPE-C cable is correctly plugged *\n");
+ /* with 125ms interval, led will blink for 17.02 years ....*/
+ nb_blink = U32_MAX;
+ }
- if (max_uV < USB_WARNING_LOW_THRESHOLD_UV) {
- pr_err("* WARNING 500mA power supply detected *\n");
+ if (max_uV > USB_LOW_THRESHOLD_UV &&
+ max_uV <= USB_WARNING_LOW_THRESHOLD_UV &&
+ min_uV <= USB_LOW_THRESHOLD_UV) {
+ pr_err("* WARNING 500mA power supply detected *\n");
nb_blink = 2;
- } else {
- pr_err("* WARNING 1.5A power supply detected *\n");
+ }
+
+ if (max_uV > USB_WARNING_LOW_THRESHOLD_UV &&
+ max_uV <= USB_START_LOW_THRESHOLD_UV &&
+ min_uV <= USB_LOW_THRESHOLD_UV) {
+ pr_err("* WARNING 1.5mA power supply detected *\n");
nb_blink = 3;
}
- pr_err("* Current too low, use a 3A power supply! *\n");
- pr_err("*******************************************\n\n");
+ /*
+ * If highest value is above 2.15 Volts that means that the USB TypeC
+ * supplies more than 3 Amp, this is not compliant with TypeC specification
+ */
+ if (max_uV > USB_START_HIGH_THRESHOLD_UV) {
+ pr_err("* USB TYPE-C charger not compliant with *\n");
+ pr_err("* specification *\n");
+ pr_err("****************************************************\n\n");
+ /* with 125ms interval, led will blink for 17.02 years ....*/
+ nb_blink = U32_MAX;
+ } else {
+ pr_err("* Current too low, use a 3A power supply! *\n");
+ pr_err("****************************************************\n\n");
+ }
ret = get_led(&led, "u-boot,error-led");
- if (ret)
+ if (ret) {
+ /* in unattached case, the boot process must be stopped */
+ if (nb_blink == U32_MAX)
+ hang();
return ret;
+ }
+ /* make u-boot,error-led blinking */
for (i = 0; i < nb_blink * 2; i++) {
led_set_state(led, LEDST_TOGGLE);
mdelay(125);
@@ -504,3 +549,199 @@ void board_quiesce_devices(void)
{
setup_led(LEDST_OFF);
}
+
+/* board interface eth init */
+/* this is a weak define that we are overriding */
+int board_interface_eth_init(phy_interface_t interface_type,
+ bool eth_clk_sel_reg, bool eth_ref_clk_sel_reg)
+{
+ u8 *syscfg;
+ u32 value;
+
+ syscfg = (u8 *)syscon_get_first_range(STM32MP_SYSCON_SYSCFG);
+
+ if (!syscfg)
+ return -ENODEV;
+
+ switch (interface_type) {
+ case PHY_INTERFACE_MODE_MII:
+ value = SYSCFG_PMCSETR_ETH_SEL_GMII_MII |
+ SYSCFG_PMCSETR_ETH_REF_CLK_SEL;
+ debug("%s: PHY_INTERFACE_MODE_MII\n", __func__);
+ break;
+ case PHY_INTERFACE_MODE_GMII:
+ if (eth_clk_sel_reg)
+ value = SYSCFG_PMCSETR_ETH_SEL_GMII_MII |
+ SYSCFG_PMCSETR_ETH_CLK_SEL;
+ else
+ value = SYSCFG_PMCSETR_ETH_SEL_GMII_MII;
+ debug("%s: PHY_INTERFACE_MODE_GMII\n", __func__);
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ if (eth_ref_clk_sel_reg)
+ value = SYSCFG_PMCSETR_ETH_SEL_RMII |
+ SYSCFG_PMCSETR_ETH_REF_CLK_SEL;
+ else
+ value = SYSCFG_PMCSETR_ETH_SEL_RMII;
+ debug("%s: PHY_INTERFACE_MODE_RMII\n", __func__);
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ if (eth_clk_sel_reg)
+ value = SYSCFG_PMCSETR_ETH_SEL_RGMII |
+ SYSCFG_PMCSETR_ETH_CLK_SEL;
+ else
+ value = SYSCFG_PMCSETR_ETH_SEL_RGMII;
+ debug("%s: PHY_INTERFACE_MODE_RGMII\n", __func__);
+ break;
+ default:
+ debug("%s: Do not manage %d interface\n",
+ __func__, interface_type);
+ /* Do not manage others interfaces */
+ return -EINVAL;
+ }
+
+ /* clear and set ETH configuration bits */
+ writel(SYSCFG_PMCSETR_ETH_SEL_MASK | SYSCFG_PMCSETR_ETH_SELMII |
+ SYSCFG_PMCSETR_ETH_REF_CLK_SEL | SYSCFG_PMCSETR_ETH_CLK_SEL,
+ syscfg + SYSCFG_PMCCLRR);
+ writel(value, syscfg + SYSCFG_PMCSETR);
+
+ return 0;
+}
+
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+ u32 bootmode = get_bootmode();
+
+ if (prio)
+ return ENVL_UNKNOWN;
+
+ switch (bootmode & TAMP_BOOT_DEVICE_MASK) {
+#ifdef CONFIG_ENV_IS_IN_EXT4
+ case BOOT_FLASH_SD:
+ case BOOT_FLASH_EMMC:
+ return ENVL_EXT4;
+#endif
+#ifdef CONFIG_ENV_IS_IN_UBI
+ case BOOT_FLASH_NAND:
+ return ENVL_UBI;
+#endif
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+ case BOOT_FLASH_NOR:
+ return ENVL_SPI_FLASH;
+#endif
+ default:
+ return ENVL_NOWHERE;
+ }
+}
+
+#if defined(CONFIG_ENV_IS_IN_EXT4)
+const char *env_ext4_get_intf(void)
+{
+ u32 bootmode = get_bootmode();
+
+ switch (bootmode & TAMP_BOOT_DEVICE_MASK) {
+ case BOOT_FLASH_SD:
+ case BOOT_FLASH_EMMC:
+ return "mmc";
+ default:
+ return "";
+ }
+}
+
+const char *env_ext4_get_dev_part(void)
+{
+ static char *const dev_part[] = {"0:auto", "1:auto", "2:auto"};
+ u32 bootmode = get_bootmode();
+
+ return dev_part[(bootmode & TAMP_BOOT_INSTANCE_MASK) - 1];
+}
+#endif
+
+#ifdef CONFIG_SYS_MTDPARTS_RUNTIME
+
+#define MTDPARTS_LEN 256
+#define MTDIDS_LEN 128
+
+/**
+ * The mtdparts_nand0 and mtdparts_nor0 variable tends to be long.
+ * If we need to access it before the env is relocated, then we need
+ * to use our own stack buffer. gd->env_buf will be too small.
+ *
+ * @param buf temporary buffer pointer MTDPARTS_LEN long
+ * @return mtdparts variable string, NULL if not found
+ */
+static const char *env_get_mtdparts(const char *str, char *buf)
+{
+ if (gd->flags & GD_FLG_ENV_READY)
+ return env_get(str);
+ if (env_get_f(str, buf, MTDPARTS_LEN) != -1)
+ return buf;
+
+ return NULL;
+}
+
+/**
+ * update the variables "mtdids" and "mtdparts" with content of mtdparts_<dev>
+ */
+static void board_get_mtdparts(const char *dev,
+ char *mtdids,
+ char *mtdparts)
+{
+ char env_name[32] = "mtdparts_";
+ char tmp_mtdparts[MTDPARTS_LEN];
+ const char *tmp;
+
+ /* name of env variable to read = mtdparts_<dev> */
+ strcat(env_name, dev);
+ tmp = env_get_mtdparts(env_name, tmp_mtdparts);
+ if (tmp) {
+ /* mtdids: "<dev>=<dev>, ...." */
+ if (mtdids[0] != '\0')
+ strcat(mtdids, ",");
+ strcat(mtdids, dev);
+ strcat(mtdids, "=");
+ strcat(mtdids, dev);
+
+ /* mtdparts: "mtdparts=<dev>:<mtdparts_<dev>>;..." */
+ if (mtdparts[0] != '\0')
+ strncat(mtdparts, ";", MTDPARTS_LEN);
+ else
+ strcat(mtdparts, "mtdparts=");
+ strncat(mtdparts, dev, MTDPARTS_LEN);
+ strncat(mtdparts, ":", MTDPARTS_LEN);
+ strncat(mtdparts, tmp, MTDPARTS_LEN);
+ }
+}
+
+void board_mtdparts_default(const char **mtdids, const char **mtdparts)
+{
+ struct udevice *dev;
+ static char parts[2 * MTDPARTS_LEN + 1];
+ static char ids[MTDIDS_LEN + 1];
+ static bool mtd_initialized;
+
+ if (mtd_initialized) {
+ *mtdids = ids;
+ *mtdparts = parts;
+ return;
+ }
+
+ memset(parts, 0, sizeof(parts));
+ memset(ids, 0, sizeof(ids));
+
+ if (!uclass_get_device(UCLASS_MTD, 0, &dev))
+ board_get_mtdparts("nand0", ids, parts);
+
+ if (!uclass_get_device(UCLASS_SPI_FLASH, 0, &dev))
+ board_get_mtdparts("nor0", ids, parts);
+
+ mtd_initialized = true;
+ *mtdids = ids;
+ *mtdparts = parts;
+ debug("%s:mtdids=%s & mtdparts=%s\n", __func__, ids, parts);
+}
+#endif
diff --git a/cmd/nvedit.c b/cmd/nvedit.c
index 52c242b4f62..49d3b5bdf46 100644
--- a/cmd/nvedit.c
+++ b/cmd/nvedit.c
@@ -39,18 +39,24 @@
DECLARE_GLOBAL_DATA_PTR;
-#if !defined(CONFIG_ENV_IS_IN_EEPROM) && \
- !defined(CONFIG_ENV_IS_IN_FLASH) && \
- !defined(CONFIG_ENV_IS_IN_MMC) && \
- !defined(CONFIG_ENV_IS_IN_FAT) && \
- !defined(CONFIG_ENV_IS_IN_EXT4) && \
- !defined(CONFIG_ENV_IS_IN_NAND) && \
- !defined(CONFIG_ENV_IS_IN_NVRAM) && \
- !defined(CONFIG_ENV_IS_IN_ONENAND) && \
- !defined(CONFIG_ENV_IS_IN_SATA) && \
- !defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \
- !defined(CONFIG_ENV_IS_IN_REMOTE) && \
- !defined(CONFIG_ENV_IS_IN_UBI) && \
+#if defined(CONFIG_ENV_IS_IN_EEPROM) || \
+ defined(CONFIG_ENV_IS_IN_FLASH) || \
+ defined(CONFIG_ENV_IS_IN_MMC) || \
+ defined(CONFIG_ENV_IS_IN_FAT) || \
+ defined(CONFIG_ENV_IS_IN_EXT4) || \
+ defined(CONFIG_ENV_IS_IN_NAND) || \
+ defined(CONFIG_ENV_IS_IN_NVRAM) || \
+ defined(CONFIG_ENV_IS_IN_ONENAND) || \
+ defined(CONFIG_ENV_IS_IN_SATA) || \
+ defined(CONFIG_ENV_IS_IN_SPI_FLASH) || \
+ defined(CONFIG_ENV_IS_IN_REMOTE) || \
+ defined(CONFIG_ENV_IS_IN_UBI)
+
+#define ENV_IS_IN_DEVICE
+
+#endif
+
+#if !defined(ENV_IS_IN_DEVICE) && \
!defined(CONFIG_ENV_IS_NOWHERE)
# error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|MMC|FAT|EXT4|\
NAND|NVRAM|ONENAND|SATA|SPI_FLASH|REMOTE|UBI} or CONFIG_ENV_IS_NOWHERE
@@ -749,7 +755,7 @@ ulong env_get_ulong(const char *name, int base, ulong default_val)
}
#ifndef CONFIG_SPL_BUILD
-#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
+#if defined(CONFIG_CMD_SAVEENV) && defined(ENV_IS_IN_DEVICE)
static int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
@@ -1205,7 +1211,7 @@ static cmd_tbl_t cmd_env_sub[] = {
#if defined(CONFIG_CMD_RUN)
U_BOOT_CMD_MKENT(run, CONFIG_SYS_MAXARGS, 1, do_run, "", ""),
#endif
-#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
+#if defined(CONFIG_CMD_SAVEENV) && defined(ENV_IS_IN_DEVICE)
U_BOOT_CMD_MKENT(save, 1, 0, do_env_save, "", ""),
#endif
U_BOOT_CMD_MKENT(set, CONFIG_SYS_MAXARGS, 0, do_env_set, "", ""),
@@ -1280,7 +1286,7 @@ static char env_help_text[] =
#if defined(CONFIG_CMD_RUN)
"env run var [...] - run commands in an environment variable\n"
#endif
-#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
+#if defined(CONFIG_CMD_SAVEENV) && defined(ENV_IS_IN_DEVICE)
"env save - save environment\n"
#endif
#if defined(CONFIG_CMD_NVEDIT_EFI)
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index 0ea9dff43de..4aa184fb5b5 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -29,6 +29,8 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_CACHE=y
@@ -37,8 +39,19 @@ CONFIG_CMD_TIMER=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_EXT4=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_IS_IN_UBI=y
+CONFIG_ENV_EXT4_INTERFACE="mmc"
+CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto"
+CONFIG_ENV_EXT4_FILE="/uboot.env"
+CONFIG_ENV_UBI_PART="UBI"
+CONFIG_ENV_UBI_VOLUME="uboot_config"
CONFIG_STM32_ADC=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
@@ -55,6 +68,20 @@ CONFIG_LED_GPIO=y
CONFIG_DM_MMC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_STM32_SDMMC2=y
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_STM32_FMC2=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_DM_ETH=y
+CONFIG_DWC_ETH_QOS=y
CONFIG_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PINCONF=y
@@ -69,6 +96,10 @@ CONFIG_DM_REGULATOR_STM32_VREFBUF=y
CONFIG_DM_REGULATOR_STPMIC1=y
CONFIG_SERIAL_RX_BUFFER=y
CONFIG_STM32_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_STM32_QSPI=y
+CONFIG_STM32_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_DM_USB_GADGET=y
@@ -79,3 +110,5 @@ CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
CONFIG_USB_GADGET_VENDOR_NUM=0x0483
CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_WDT=y
+CONFIG_WDT_STM32MP=y
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index 3c2bb75564d..66361c87155 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -22,6 +22,8 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_CACHE=y
@@ -30,7 +32,18 @@ CONFIG_CMD_TIMER=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_EXT4=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_IS_IN_UBI=y
+CONFIG_ENV_EXT4_INTERFACE="mmc"
+CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto"
+CONFIG_ENV_EXT4_FILE="/uboot.env"
+CONFIG_ENV_UBI_PART="UBI"
+CONFIG_ENV_UBI_VOLUME="uboot_config"
CONFIG_STM32_ADC=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
@@ -47,6 +60,20 @@ CONFIG_LED_GPIO=y
CONFIG_DM_MMC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_STM32_SDMMC2=y
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_STM32_FMC2=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
CONFIG_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
CONFIG_PINCONF=y
@@ -59,6 +86,10 @@ CONFIG_DM_REGULATOR_STM32_VREFBUF=y
CONFIG_DM_REGULATOR_STPMIC1=y
CONFIG_SERIAL_RX_BUFFER=y
CONFIG_STM32_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_STM32_QSPI=y
+CONFIG_STM32_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_DM_USB_GADGET=y
@@ -69,3 +100,5 @@ CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
CONFIG_USB_GADGET_VENDOR_NUM=0x0483
CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_WDT=y
+CONFIG_WDT_STM32MP=y
diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c
index 6272b00b9ef..f295e4864b3 100644
--- a/drivers/clk/clk_stm32mp1.c
+++ b/drivers/clk/clk_stm32mp1.c
@@ -90,6 +90,7 @@
#define RCC_PLL4CSGR 0x8A4
#define RCC_I2C12CKSELR 0x8C0
#define RCC_I2C35CKSELR 0x8C4
+#define RCC_SPI2S1CKSELR 0x8D8
#define RCC_UART6CKSELR 0x8E4
#define RCC_UART24CKSELR 0x8E8
#define RCC_UART35CKSELR 0x8EC
@@ -298,6 +299,7 @@ enum stm32mp1_parent_sel {
_STGEN_SEL,
_DSI_SEL,
_ADC12_SEL,
+ _SPI1_SEL,
_PARENT_SEL_NB,
_UNKNOWN_SEL = 0xff,
};
@@ -519,6 +521,7 @@ static const struct stm32mp1_clk_gate stm32mp1_clk_gate[] = {
STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 23, I2C3_K, _I2C35_SEL),
STM32MP1_CLK_SET_CLR(RCC_MP_APB1ENSETR, 24, I2C5_K, _I2C35_SEL),
+ STM32MP1_CLK_SET_CLR(RCC_MP_APB2ENSETR, 8, SPI1_K, _SPI1_SEL),
STM32MP1_CLK_SET_CLR(RCC_MP_APB2ENSETR, 13, USART6_K, _UART6_SEL),
STM32MP1_CLK_SET_CLR_F(RCC_MP_APB3ENSETR, 13, VREF, _PCLK3),
@@ -555,7 +558,7 @@ static const struct stm32mp1_clk_gate stm32mp1_clk_gate[] = {
STM32MP1_CLK_SET_CLR(RCC_MP_AHB5ENSETR, 0, GPIOZ, _UNKNOWN_SEL),
- STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 7, ETHCK, _ETH_SEL),
+ STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 7, ETHCK_K, _ETH_SEL),
STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 8, ETHTX, _UNKNOWN_SEL),
STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 9, ETHRX, _UNKNOWN_SEL),
STM32MP1_CLK_SET_CLR_F(RCC_MP_AHB6ENSETR, 10, ETHMAC, _ACLK),
@@ -589,6 +592,8 @@ static const u8 usbo_parents[] = {_PLL4_R, _USB_PHY_48};
static const u8 stgen_parents[] = {_HSI_KER, _HSE_KER};
static const u8 dsi_parents[] = {_DSI_PHY, _PLL4_P};
static const u8 adc_parents[] = {_PLL4_R, _CK_PER, _PLL3_Q};
+static const u8 spi_parents[] = {_PLL4_P, _PLL3_Q, _I2S_CKIN, _CK_PER,
+ _PLL3_R};
static const struct stm32mp1_clk_sel stm32mp1_clk_sel[_PARENT_SEL_NB] = {
STM32MP1_CLK_PARENT(_I2C12_SEL, RCC_I2C12CKSELR, 0, 0x7, i2c12_parents),
@@ -613,6 +618,7 @@ static const struct stm32mp1_clk_sel stm32mp1_clk_sel[_PARENT_SEL_NB] = {
STM32MP1_CLK_PARENT(_STGEN_SEL, RCC_STGENCKSELR, 0, 0x3, stgen_parents),
STM32MP1_CLK_PARENT(_DSI_SEL, RCC_DSICKSELR, 0, 0x1, dsi_parents),
STM32MP1_CLK_PARENT(_ADC12_SEL, RCC_ADCCKSELR, 0, 0x1, adc_parents),
+ STM32MP1_CLK_PARENT(_SPI1_SEL, RCC_SPI2S1CKSELR, 0, 0x7, spi_parents),
};
#ifdef STM32MP1_CLOCK_TREE_INIT
@@ -727,6 +733,7 @@ char * const stm32mp1_clk_parent_sel_name[_PARENT_SEL_NB] = {
[_STGEN_SEL] = "STGEN",
[_DSI_SEL] = "DSI",
[_ADC12_SEL] = "ADC12",
+ [_SPI1_SEL] = "SPI1",
};
static const struct stm32mp1_clk_data stm32mp1_data = {
diff --git a/drivers/mtd/mtd_uboot.c b/drivers/mtd/mtd_uboot.c
index d638f700d04..0a41ed477c1 100644
--- a/drivers/mtd/mtd_uboot.c
+++ b/drivers/mtd/mtd_uboot.c
@@ -122,7 +122,6 @@ static const char *get_mtdparts(void)
{
__maybe_unused const char *mtdids = NULL;
static char tmp_parts[MTDPARTS_MAXLEN];
- static bool use_defaults = true;
const char *mtdparts = NULL;
if (gd->flags & GD_FLG_ENV_READY)
@@ -130,7 +129,7 @@ static const char *get_mtdparts(void)
else if (env_get_f("mtdparts", tmp_parts, sizeof(tmp_parts)) != -1)
mtdparts = tmp_parts;
- if (mtdparts || !use_defaults)
+ if (mtdparts)
return mtdparts;
#if defined(CONFIG_SYS_MTDPARTS_RUNTIME)
@@ -144,8 +143,6 @@ static const char *get_mtdparts(void)
if (mtdparts)
env_set("mtdparts", mtdparts);
- use_defaults = false;
-
return mtdparts;
}
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index 590e756f5c6..07b36675a74 100644
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -26,7 +26,6 @@
* supports a single RGMII PHY. This configuration also has SW control over
* all clock and reset signals to the HW block.
*/
-
#include <common.h>
#include <clk.h>
#include <dm.h>
@@ -95,6 +94,7 @@ struct eqos_mac_regs {
#define EQOS_MAC_RXQ_CTRL0_RXQ0EN_MASK 3
#define EQOS_MAC_RXQ_CTRL0_RXQ0EN_NOT_ENABLED 0
#define EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_DCB 2
+#define EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_AV 1
#define EQOS_MAC_RXQ_CTRL2_PSRQ0_SHIFT 0
#define EQOS_MAC_RXQ_CTRL2_PSRQ0_MASK 0xff
@@ -108,6 +108,7 @@ struct eqos_mac_regs {
#define EQOS_MAC_MDIO_ADDRESS_RDA_SHIFT 16
#define EQOS_MAC_MDIO_ADDRESS_CR_SHIFT 8
#define EQOS_MAC_MDIO_ADDRESS_CR_20_35 2
+#define EQOS_MAC_MDIO_ADDRESS_CR_250_300 5
#define EQOS_MAC_MDIO_ADDRESS_SKAP BIT(4)
#define EQOS_MAC_MDIO_ADDRESS_GOC_SHIFT 2
#define EQOS_MAC_MDIO_ADDRESS_GOC_READ 3
@@ -260,6 +261,29 @@ struct eqos_desc {
struct eqos_config {
bool reg_access_always_ok;
+ int mdio_wait;
+ int swr_wait;
+ int config_mac;
+ int config_mac_mdio;
+ phy_interface_t (*interface)(struct udevice *dev);
+ struct eqos_ops *ops;
+};
+
+struct eqos_ops {
+ void (*eqos_inval_desc)(void *desc);
+ void (*eqos_flush_desc)(void *desc);
+ void (*eqos_inval_buffer)(void *buf, size_t size);
+ void (*eqos_flush_buffer)(void *buf, size_t size);
+ int (*eqos_probe_resources)(struct udevice *dev);
+ int (*eqos_remove_resources)(struct udevice *dev);
+ int (*eqos_stop_resets)(struct udevice *dev);
+ int (*eqos_start_resets)(struct udevice *dev);
+ void (*eqos_stop_clks)(struct udevice *dev);
+ int (*eqos_start_clks)(struct udevice *dev);
+ int (*eqos_calibrate_pads)(struct udevice *dev);
+ int (*eqos_disable_calibration)(struct udevice *dev);
+ int (*eqos_set_tx_clk_speed)(struct udevice *dev);
+ ulong (*eqos_get_tick_clk_rate)(struct udevice *dev);
};
struct eqos_priv {
@@ -276,6 +300,7 @@ struct eqos_priv {
struct clk clk_rx;
struct clk clk_ptp_ref;
struct clk clk_tx;
+ struct clk clk_ck;
struct clk clk_slave_bus;
struct mii_dev *mii;
struct phy_device *phy;
@@ -327,7 +352,7 @@ static void eqos_free_descs(void *descs)
#endif
}
-static void eqos_inval_desc(void *desc)
+static void eqos_inval_desc_tegra186(void *desc)
{
#ifndef CONFIG_SYS_NONCACHED_MEMORY
unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1);
@@ -338,14 +363,36 @@ static void eqos_inval_desc(void *desc)
#endif
}
-static void eqos_flush_desc(void *desc)
+static void eqos_inval_desc_stm32(void *desc)
+{
+#ifndef CONFIG_SYS_NONCACHED_MEMORY
+ unsigned long start = rounddown((unsigned long)desc, ARCH_DMA_MINALIGN);
+ unsigned long end = roundup((unsigned long)desc + EQOS_DESCRIPTOR_SIZE,
+ ARCH_DMA_MINALIGN);
+
+ invalidate_dcache_range(start, end);
+#endif
+}
+
+static void eqos_flush_desc_tegra186(void *desc)
{
#ifndef CONFIG_SYS_NONCACHED_MEMORY
flush_cache((unsigned long)desc, EQOS_DESCRIPTOR_SIZE);
#endif
}
-static void eqos_inval_buffer(void *buf, size_t size)
+static void eqos_flush_desc_stm32(void *desc)
+{
+#ifndef CONFIG_SYS_NONCACHED_MEMORY
+ unsigned long start = rounddown((unsigned long)desc, ARCH_DMA_MINALIGN);
+ unsigned long end = roundup((unsigned long)desc + EQOS_DESCRIPTOR_SIZE,
+ ARCH_DMA_MINALIGN);
+
+ flush_dcache_range(start, end);
+#endif
+}
+
+static void eqos_inval_buffer_tegra186(void *buf, size_t size)
{
unsigned long start = (unsigned long)buf & ~(ARCH_DMA_MINALIGN - 1);
unsigned long end = ALIGN(start + size, ARCH_DMA_MINALIGN);
@@ -353,11 +400,29 @@ static void eqos_inval_buffer(void *buf, size_t size)
invalidate_dcache_range(start, end);
}
-static void eqos_flush_buffer(void *buf, size_t size)
+static void eqos_inval_buffer_stm32(void *buf, size_t size)
+{
+ unsigned long start = rounddown((unsigned long)buf, ARCH_DMA_MINALIGN);
+ unsigned long end = roundup((unsigned long)buf + size,
+ ARCH_DMA_MINALIGN);
+
+ invalidate_dcache_range(start, end);
+}
+
+static void eqos_flush_buffer_tegra186(void *buf, size_t size)
{
flush_cache((unsigned long)buf, size);
}
+static void eqos_flush_buffer_stm32(void *buf, size_t size)
+{
+ unsigned long start = rounddown((unsigned long)buf, ARCH_DMA_MINALIGN);
+ unsigned long end = roundup((unsigned long)buf + size,
+ ARCH_DMA_MINALIGN);
+
+ flush_dcache_range(start, end);
+}
+
static int eqos_mdio_wait_idle(struct eqos_priv *eqos)
{
return wait_for_bit_le32(&eqos->mac_regs->mdio_address,
@@ -386,14 +451,14 @@ static int eqos_mdio_read(struct mii_dev *bus, int mdio_addr, int mdio_devad,
EQOS_MAC_MDIO_ADDRESS_C45E;
val |= (mdio_addr << EQOS_MAC_MDIO_ADDRESS_PA_SHIFT) |
(mdio_reg << EQOS_MAC_MDIO_ADDRESS_RDA_SHIFT) |
- (EQOS_MAC_MDIO_ADDRESS_CR_20_35 <<
+ (eqos->config->config_mac_mdio <<
EQOS_MAC_MDIO_ADDRESS_CR_SHIFT) |
(EQOS_MAC_MDIO_ADDRESS_GOC_READ <<
EQOS_MAC_MDIO_ADDRESS_GOC_SHIFT) |
EQOS_MAC_MDIO_ADDRESS_GB;
writel(val, &eqos->mac_regs->mdio_address);
- udelay(10);
+ udelay(eqos->config->mdio_wait);
ret = eqos_mdio_wait_idle(eqos);
if (ret) {
@@ -432,14 +497,14 @@ static int eqos_mdio_write(struct mii_dev *bus, int mdio_addr, int mdio_devad,
EQOS_MAC_MDIO_ADDRESS_C45E;
val |= (mdio_addr << EQOS_MAC_MDIO_ADDRESS_PA_SHIFT) |
(mdio_reg << EQOS_MAC_MDIO_ADDRESS_RDA_SHIFT) |
- (EQOS_MAC_MDIO_ADDRESS_CR_20_35 <<
+ (eqos->config->config_mac_mdio <<
EQOS_MAC_MDIO_ADDRESS_CR_SHIFT) |
(EQOS_MAC_MDIO_ADDRESS_GOC_WRITE <<
EQOS_MAC_MDIO_ADDRESS_GOC_SHIFT) |
EQOS_MAC_MDIO_ADDRESS_GB;
writel(val, &eqos->mac_regs->mdio_address);
- udelay(10);
+ udelay(eqos->config->mdio_wait);
ret = eqos_mdio_wait_idle(eqos);
if (ret) {
@@ -509,6 +574,53 @@ err:
return ret;
}
+static int eqos_start_clks_stm32(struct udevice *dev)
+{
+ struct eqos_priv *eqos = dev_get_priv(dev);
+ int ret;
+
+ debug("%s(dev=%p):\n", __func__, dev);
+
+ ret = clk_enable(&eqos->clk_master_bus);
+ if (ret < 0) {
+ pr_err("clk_enable(clk_master_bus) failed: %d", ret);
+ goto err;
+ }
+
+ ret = clk_enable(&eqos->clk_rx);
+ if (ret < 0) {
+ pr_err("clk_enable(clk_rx) failed: %d", ret);
+ goto err_disable_clk_master_bus;
+ }
+
+ ret = clk_enable(&eqos->clk_tx);
+ if (ret < 0) {
+ pr_err("clk_enable(clk_tx) failed: %d", ret);
+ goto err_disable_clk_rx;
+ }
+
+ if (clk_valid(&eqos->clk_ck)) {
+ ret = clk_enable(&eqos->clk_ck);
+ if (ret < 0) {
+ pr_err("clk_enable(clk_ck) failed: %d", ret);
+ goto err_disable_clk_tx;
+ }
+ }
+
+ debug("%s: OK\n", __func__);
+ return 0;
+
+err_disable_clk_tx:
+ clk_disable(&eqos->clk_tx);
+err_disable_clk_rx:
+ clk_disable(&eqos->clk_rx);
+err_disable_clk_master_bus:
+ clk_disable(&eqos->clk_master_bus);
+err:
+ debug("%s: FAILED: %d\n", __func__, ret);
+ return ret;
+}
+
void eqos_stop_clks_tegra186(struct udevice *dev)
{
struct eqos_priv *eqos = dev_get_priv(dev);
@@ -524,6 +636,21 @@ void eqos_stop_clks_tegra186(struct udevice *dev)
debug("%s: OK\n", __func__);
}
+void eqos_stop_clks_stm32(struct udevice *dev)
+{
+ struct eqos_priv *eqos = dev_get_priv(dev);
+
+ debug("%s(dev=%p):\n", __func__, dev);
+
+ clk_disable(&eqos->clk_tx);
+ clk_disable(&eqos->clk_rx);
+ clk_disable(&eqos->clk_master_bus);
+ if (clk_valid(&eqos->clk_ck))
+ clk_disable(&eqos->clk_ck);
+
+ debug("%s: OK\n", __func__);
+}
+
static int eqos_start_resets_tegra186(struct udevice *dev)
{
struct eqos_priv *eqos = dev_get_priv(dev);
@@ -563,6 +690,11 @@ static int eqos_start_resets_tegra186(struct udevice *dev)
return 0;
}
+static int eqos_start_resets_stm32(struct udevice *dev)
+{
+ return 0;
+}
+
static int eqos_stop_resets_tegra186(struct udevice *dev)
{
struct eqos_priv *eqos = dev_get_priv(dev);
@@ -573,6 +705,11 @@ static int eqos_stop_resets_tegra186(struct udevice *dev)
return 0;
}
+static int eqos_stop_resets_stm32(struct udevice *dev)
+{
+ return 0;
+}
+
static int eqos_calibrate_pads_tegra186(struct udevice *dev)
{
struct eqos_priv *eqos = dev_get_priv(dev);
@@ -632,6 +769,23 @@ static ulong eqos_get_tick_clk_rate_tegra186(struct udevice *dev)
return clk_get_rate(&eqos->clk_slave_bus);
}
+static ulong eqos_get_tick_clk_rate_stm32(struct udevice *dev)
+{
+ struct eqos_priv *eqos = dev_get_priv(dev);
+
+ return clk_get_rate(&eqos->clk_master_bus);
+}
+
+static int eqos_calibrate_pads_stm32(struct udevice *dev)
+{
+ return 0;
+}
+
+static int eqos_disable_calibration_stm32(struct udevice *dev)
+{
+ return 0;
+}
+
static int eqos_set_full_duplex(struct udevice *dev)
{
struct eqos_priv *eqos = dev_get_priv(dev);
@@ -726,6 +880,11 @@ static int eqos_set_tx_clk_speed_tegra186(struct udevice *dev)
return 0;
}
+static int eqos_set_tx_clk_speed_stm32(struct udevice *dev)
+{
+ return 0;
+}
+
static int eqos_adjust_link(struct udevice *dev)
{
struct eqos_priv *eqos = dev_get_priv(dev);
@@ -766,23 +925,23 @@ static int eqos_adjust_link(struct udevice *dev)
}
if (en_calibration) {
- ret = eqos_calibrate_pads_tegra186(dev);
+ ret = eqos->config->ops->eqos_calibrate_pads(dev);
if (ret < 0) {
- pr_err("eqos_calibrate_pads_tegra186() failed: %d", ret);
+ pr_err("eqos_calibrate_pads() failed: %d",
+ ret);
return ret;
}
} else {
- ret = eqos_disable_calibration_tegra186(dev);
+ ret = eqos->config->ops->eqos_disable_calibration(dev);
if (ret < 0) {
- pr_err("eqos_disable_calibration_tegra186() failed: %d",
- ret);
+ pr_err("eqos_disable_calibration() failed: %d",
+ ret);
return ret;
}
}
-
- ret = eqos_set_tx_clk_speed_tegra186(dev);
+ ret = eqos->config->ops->eqos_set_tx_clk_speed(dev);
if (ret < 0) {
- pr_err("eqos_set_tx_clk_speed_tegra186() failed: %d", ret);
+ pr_err("eqos_set_tx_clk_speed() failed: %d", ret);
return ret;
}
@@ -846,15 +1005,15 @@ static int eqos_start(struct udevice *dev)
eqos->tx_desc_idx = 0;
eqos->rx_desc_idx = 0;
- ret = eqos_start_clks_tegra186(dev);
+ ret = eqos->config->ops->eqos_start_clks(dev);
if (ret < 0) {
- pr_err("eqos_start_clks_tegra186() failed: %d", ret);
+ pr_err("eqos_start_clks() failed: %d", ret);
goto err;
}
- ret = eqos_start_resets_tegra186(dev);
+ ret = eqos->config->ops->eqos_start_resets(dev);
if (ret < 0) {
- pr_err("eqos_start_resets_tegra186() failed: %d", ret);
+ pr_err("eqos_start_resets() failed: %d", ret);
goto err_stop_clks;
}
@@ -863,32 +1022,41 @@ static int eqos_start(struct udevice *dev)
eqos->reg_access_ok = true;
ret = wait_for_bit_le32(&eqos->dma_regs->mode,
- EQOS_DMA_MODE_SWR, false, 10, false);
+ EQOS_DMA_MODE_SWR, false,
+ eqos->config->swr_wait, false);
if (ret) {
pr_err("EQOS_DMA_MODE_SWR stuck");
goto err_stop_resets;
}
- ret = eqos_calibrate_pads_tegra186(dev);
+ ret = eqos->config->ops->eqos_calibrate_pads(dev);
if (ret < 0) {
- pr_err("eqos_calibrate_pads_tegra186() failed: %d", ret);
+ pr_err("eqos_calibrate_pads() failed: %d", ret);
goto err_stop_resets;
}
+ rate = eqos->config->ops->eqos_get_tick_clk_rate(dev);
- rate = eqos_get_tick_clk_rate_tegra186(dev);
val = (rate / 1000000) - 1;
writel(val, &eqos->mac_regs->us_tic_counter);
- eqos->phy = phy_connect(eqos->mii, 0, dev, 0);
+ /*
+ * if PHY was already connected and configured,
+ * don't need to reconnect/reconfigure again
+ */
if (!eqos->phy) {
- pr_err("phy_connect() failed");
- goto err_stop_resets;
- }
- ret = phy_config(eqos->phy);
- if (ret < 0) {
- pr_err("phy_config() failed: %d", ret);
- goto err_shutdown_phy;
+ eqos->phy = phy_connect(eqos->mii, 0, dev,
+ eqos->config->interface(dev));
+ if (!eqos->phy) {
+ pr_err("phy_connect() failed");
+ goto err_stop_resets;
+ }
+ ret = phy_config(eqos->phy);
+ if (ret < 0) {
+ pr_err("phy_config() failed: %d", ret);
+ goto err_shutdown_phy;
+ }
}
+
ret = phy_startup(eqos->phy);
if (ret < 0) {
pr_err("phy_startup() failed: %d", ret);
@@ -993,7 +1161,7 @@ static int eqos_start(struct udevice *dev)
clrsetbits_le32(&eqos->mac_regs->rxq_ctrl0,
EQOS_MAC_RXQ_CTRL0_RXQ0EN_MASK <<
EQOS_MAC_RXQ_CTRL0_RXQ0EN_SHIFT,
- EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_DCB <<
+ eqos->config->config_mac <<
EQOS_MAC_RXQ_CTRL0_RXQ0EN_SHIFT);
/* Set TX flow control parameters */
@@ -1074,7 +1242,7 @@ static int eqos_start(struct udevice *dev)
(i * EQOS_MAX_PACKET_SIZE));
rx_desc->des3 |= EQOS_DESC3_OWN | EQOS_DESC3_BUF1V;
}
- flush_cache((unsigned long)eqos->descs, EQOS_DESCRIPTORS_SIZE);
+ eqos->config->ops->eqos_flush_desc(eqos->descs);
writel(0, &eqos->dma_regs->ch0_txdesc_list_haddress);
writel((ulong)eqos->tx_descs, &eqos->dma_regs->ch0_txdesc_list_address);
@@ -1113,11 +1281,10 @@ static int eqos_start(struct udevice *dev)
err_shutdown_phy:
phy_shutdown(eqos->phy);
- eqos->phy = NULL;
err_stop_resets:
- eqos_stop_resets_tegra186(dev);
+ eqos->config->ops->eqos_stop_resets(dev);
err_stop_clks:
- eqos_stop_clks_tegra186(dev);
+ eqos->config->ops->eqos_stop_clks(dev);
err:
pr_err("FAILED: %d", ret);
return ret;
@@ -1170,10 +1337,9 @@ void eqos_stop(struct udevice *dev)
if (eqos->phy) {
phy_shutdown(eqos->phy);
- eqos->phy = NULL;
}
- eqos_stop_resets_tegra186(dev);
- eqos_stop_clks_tegra186(dev);
+ eqos->config->ops->eqos_stop_resets(dev);
+ eqos->config->ops->eqos_stop_clks(dev);
debug("%s: OK\n", __func__);
}
@@ -1188,7 +1354,7 @@ int eqos_send(struct udevice *dev, void *packet, int length)
length);
memcpy(eqos->tx_dma_buf, packet, length);
- eqos_flush_buffer(eqos->tx_dma_buf, length);
+ eqos->config->ops->eqos_flush_buffer(eqos->tx_dma_buf, length);
tx_desc = &(eqos->tx_descs[eqos->tx_desc_idx]);
eqos->tx_desc_idx++;
@@ -1203,12 +1369,12 @@ int eqos_send(struct udevice *dev, void *packet, int length)
*/
mb();
tx_desc->des3 = EQOS_DESC3_OWN | EQOS_DESC3_FD | EQOS_DESC3_LD | length;
- eqos_flush_desc(tx_desc);
+ eqos->config->ops->eqos_flush_desc(tx_desc);
writel((ulong)(tx_desc + 1), &eqos->dma_regs->ch0_txdesc_tail_pointer);
for (i = 0; i < 1000000; i++) {
- eqos_inval_desc(tx_desc);
+ eqos->config->ops->eqos_inval_desc(tx_desc);
if (!(readl(&tx_desc->des3) & EQOS_DESC3_OWN))
return 0;
udelay(1);
@@ -1238,7 +1404,7 @@ int eqos_recv(struct udevice *dev, int flags, uchar **packetp)
length = rx_desc->des3 & 0x7fff;
debug("%s: *packetp=%p, length=%d\n", __func__, *packetp, length);
- eqos_inval_buffer(*packetp, length);
+ eqos->config->ops->eqos_inval_buffer(*packetp, length);
return length;
}
@@ -1269,7 +1435,7 @@ int eqos_free_pkt(struct udevice *dev, uchar *packet, int length)
*/
mb();
rx_desc->des3 |= EQOS_DESC3_OWN | EQOS_DESC3_BUF1V;
- eqos_flush_desc(rx_desc);
+ eqos->config->ops->eqos_flush_desc(rx_desc);
writel((ulong)rx_desc, &eqos->dma_regs->ch0_rxdesc_tail_pointer);
@@ -1304,7 +1470,7 @@ static int eqos_probe_resources_core(struct udevice *dev)
ret = -ENOMEM;
goto err_free_descs;
}
- debug("%s: rx_dma_buf=%p\n", __func__, eqos->rx_dma_buf);
+ debug("%s: tx_dma_buf=%p\n", __func__, eqos->tx_dma_buf);
eqos->rx_dma_buf = memalign(EQOS_BUFFER_ALIGN, EQOS_RX_BUFFER_SIZE);
if (!eqos->rx_dma_buf) {
@@ -1312,7 +1478,7 @@ static int eqos_probe_resources_core(struct udevice *dev)
ret = -ENOMEM;
goto err_free_tx_dma_buf;
}
- debug("%s: tx_dma_buf=%p\n", __func__, eqos->tx_dma_buf);
+ debug("%s: rx_dma_buf=%p\n", __func__, eqos->rx_dma_buf);
eqos->rx_pkt = malloc(EQOS_MAX_PACKET_SIZE);
if (!eqos->rx_pkt) {
@@ -1424,6 +1590,98 @@ err_free_reset_eqos:
return ret;
}
+/* board-specific Ethernet Interface initializations. */
+__weak int board_interface_eth_init(int interface_type, bool eth_clk_sel_reg,
+ bool eth_ref_clk_sel_reg)
+{
+ return 0;
+}
+
+static int eqos_probe_resources_stm32(struct udevice *dev)
+{
+ struct eqos_priv *eqos = dev_get_priv(dev);
+ int ret;
+ phy_interface_t interface;
+ bool eth_clk_sel_reg = false;
+ bool eth_ref_clk_sel_reg = false;
+
+ debug("%s(dev=%p):\n", __func__, dev);
+
+ interface = eqos->config->interface(dev);
+
+ if (interface == PHY_INTERFACE_MODE_NONE) {
+ pr_err("Invalid PHY interface\n");
+ return -EINVAL;
+ }
+
+ /* Gigabit Ethernet 125MHz clock selection. */
+ eth_clk_sel_reg = dev_read_bool(dev, "st,eth_clk_sel");
+
+ /* Ethernet 50Mhz RMII clock selection */
+ eth_ref_clk_sel_reg =
+ dev_read_bool(dev, "st,eth_ref_clk_sel");
+
+ ret = board_interface_eth_init(interface, eth_clk_sel_reg,
+ eth_ref_clk_sel_reg);
+ if (ret)
+ return -EINVAL;
+
+ ret = clk_get_by_name(dev, "stmmaceth", &eqos->clk_master_bus);
+ if (ret) {
+ pr_err("clk_get_by_name(master_bus) failed: %d", ret);
+ goto err_probe;
+ }
+
+ ret = clk_get_by_name(dev, "mac-clk-rx", &eqos->clk_rx);
+ if (ret) {
+ pr_err("clk_get_by_name(rx) failed: %d", ret);
+ goto err_free_clk_master_bus;
+ }
+
+ ret = clk_get_by_name(dev, "mac-clk-tx", &eqos->clk_tx);
+ if (ret) {
+ pr_err("clk_get_by_name(tx) failed: %d", ret);
+ goto err_free_clk_rx;
+ }
+
+ /* Get ETH_CLK clocks (optional) */
+ ret = clk_get_by_name(dev, "eth-ck", &eqos->clk_ck);
+ if (ret)
+ pr_warn("No phy clock provided %d", ret);
+
+ debug("%s: OK\n", __func__);
+ return 0;
+
+err_free_clk_rx:
+ clk_free(&eqos->clk_rx);
+err_free_clk_master_bus:
+ clk_free(&eqos->clk_master_bus);
+err_probe:
+
+ debug("%s: returns %d\n", __func__, ret);
+ return ret;
+}
+
+static phy_interface_t eqos_get_interface_stm32(struct udevice *dev)
+{
+ const char *phy_mode;
+ phy_interface_t interface = PHY_INTERFACE_MODE_NONE;
+
+ debug("%s(dev=%p):\n", __func__, dev);
+
+ phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
+ NULL);
+ if (phy_mode)
+ interface = phy_get_interface_by_name(phy_mode);
+
+ return interface;
+}
+
+static phy_interface_t eqos_get_interface_tegra186(struct udevice *dev)
+{
+ return PHY_INTERFACE_MODE_MII;
+}
+
static int eqos_remove_resources_tegra186(struct udevice *dev)
{
struct eqos_priv *eqos = dev_get_priv(dev);
@@ -1442,6 +1700,22 @@ static int eqos_remove_resources_tegra186(struct udevice *dev)
return 0;
}
+static int eqos_remove_resources_stm32(struct udevice *dev)
+{
+ struct eqos_priv *eqos = dev_get_priv(dev);
+
+ debug("%s(dev=%p):\n", __func__, dev);
+
+ clk_free(&eqos->clk_tx);
+ clk_free(&eqos->clk_rx);
+ clk_free(&eqos->clk_master_bus);
+ if (clk_valid(&eqos->clk_ck))
+ clk_free(&eqos->clk_ck);
+
+ debug("%s: OK\n", __func__);
+ return 0;
+}
+
static int eqos_probe(struct udevice *dev)
{
struct eqos_priv *eqos = dev_get_priv(dev);
@@ -1468,15 +1742,16 @@ static int eqos_probe(struct udevice *dev)
return ret;
}
- ret = eqos_probe_resources_tegra186(dev);
+ ret = eqos->config->ops->eqos_probe_resources(dev);
if (ret < 0) {
- pr_err("eqos_probe_resources_tegra186() failed: %d", ret);
+ pr_err("eqos_probe_resources() failed: %d", ret);
goto err_remove_resources_core;
}
eqos->mii = mdio_alloc();
if (!eqos->mii) {
pr_err("mdio_alloc() failed");
+ ret = -ENOMEM;
goto err_remove_resources_tegra;
}
eqos->mii->read = eqos_mdio_read;
@@ -1496,7 +1771,7 @@ static int eqos_probe(struct udevice *dev)
err_free_mdio:
mdio_free(eqos->mii);
err_remove_resources_tegra:
- eqos_remove_resources_tegra186(dev);
+ eqos->config->ops->eqos_remove_resources(dev);
err_remove_resources_core:
eqos_remove_resources_core(dev);
@@ -1512,7 +1787,8 @@ static int eqos_remove(struct udevice *dev)
mdio_unregister(eqos->mii);
mdio_free(eqos->mii);
- eqos_remove_resources_tegra186(dev);
+ eqos->config->ops->eqos_remove_resources(dev);
+
eqos_probe_resources_core(dev);
debug("%s: OK\n", __func__);
@@ -1528,8 +1804,58 @@ static const struct eth_ops eqos_ops = {
.write_hwaddr = eqos_write_hwaddr,
};
+static struct eqos_ops eqos_tegra186_ops = {
+ .eqos_inval_desc = eqos_inval_desc_tegra186,
+ .eqos_flush_desc = eqos_flush_desc_tegra186,
+ .eqos_inval_buffer = eqos_inval_buffer_tegra186,
+ .eqos_flush_buffer = eqos_flush_buffer_tegra186,
+ .eqos_probe_resources = eqos_probe_resources_tegra186,
+ .eqos_remove_resources = eqos_remove_resources_tegra186,
+ .eqos_stop_resets = eqos_stop_resets_tegra186,
+ .eqos_start_resets = eqos_start_resets_tegra186,
+ .eqos_stop_clks = eqos_stop_clks_tegra186,
+ .eqos_start_clks = eqos_start_clks_tegra186,
+ .eqos_calibrate_pads = eqos_calibrate_pads_tegra186,
+ .eqos_disable_calibration = eqos_disable_calibration_tegra186,
+ .eqos_set_tx_clk_speed = eqos_set_tx_clk_speed_tegra186,
+ .eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_tegra186
+};
+
static const struct eqos_config eqos_tegra186_config = {
.reg_access_always_ok = false,
+ .mdio_wait = 10,
+ .swr_wait = 10,
+ .config_mac = EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_DCB,
+ .config_mac_mdio = EQOS_MAC_MDIO_ADDRESS_CR_20_35,
+ .interface = eqos_get_interface_tegra186,
+ .ops = &eqos_tegra186_ops
+};
+
+static struct eqos_ops eqos_stm32_ops = {
+ .eqos_inval_desc = eqos_inval_desc_stm32,
+ .eqos_flush_desc = eqos_flush_desc_stm32,
+ .eqos_inval_buffer = eqos_inval_buffer_stm32,
+ .eqos_flush_buffer = eqos_flush_buffer_stm32,
+ .eqos_probe_resources = eqos_probe_resources_stm32,
+ .eqos_remove_resources = eqos_remove_resources_stm32,
+ .eqos_stop_resets = eqos_stop_resets_stm32,
+ .eqos_start_resets = eqos_start_resets_stm32,
+ .eqos_stop_clks = eqos_stop_clks_stm32,
+ .eqos_start_clks = eqos_start_clks_stm32,
+ .eqos_calibrate_pads = eqos_calibrate_pads_stm32,
+ .eqos_disable_calibration = eqos_disable_calibration_stm32,
+ .eqos_set_tx_clk_speed = eqos_set_tx_clk_speed_stm32,
+ .eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_stm32
+};
+
+static const struct eqos_config eqos_stm32_config = {
+ .reg_access_always_ok = false,
+ .mdio_wait = 10000,
+ .swr_wait = 50,
+ .config_mac = EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_AV,
+ .config_mac_mdio = EQOS_MAC_MDIO_ADDRESS_CR_250_300,
+ .interface = eqos_get_interface_stm32,
+ .ops = &eqos_stm32_ops
};
static const struct udevice_id eqos_ids[] = {
@@ -1537,6 +1863,11 @@ static const struct udevice_id eqos_ids[] = {
.compatible = "nvidia,tegra186-eqos",
.data = (ulong)&eqos_tegra186_config
},
+ {
+ .compatible = "snps,dwmac-4.20a",
+ .data = (ulong)&eqos_stm32_config
+ },
+
{ }
};
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index eb32f082fe9..04ddb32a8f3 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -239,6 +239,14 @@ config STM32_QSPI
used to access the SPI NOR flash chips on platforms embedding
this ST IP core.
+config STM32_SPI
+ bool "STM32 SPI driver"
+ depends on ARCH_STM32MP
+ help
+ Enable the STM32 Serial Peripheral Interface (SPI) driver for STM32MP
+ SoCs. This uses driver model and requires a device tree binding to
+ operate.
+
config TEGRA114_SPI
bool "nVidia Tegra114 SPI driver"
help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 8be9a4baa24..3f9f2fab2b9 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_SPI_SUNXI) += spi-sunxi.o
obj-$(CONFIG_SH_SPI) += sh_spi.o
obj-$(CONFIG_SH_QSPI) += sh_qspi.o
obj-$(CONFIG_STM32_QSPI) += stm32_qspi.o
+obj-$(CONFIG_STM32_SPI) += stm32_spi.o
obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o
obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
diff --git a/drivers/spi/stm32_spi.c b/drivers/spi/stm32_spi.c
new file mode 100644
index 00000000000..34b217584dd
--- /dev/null
+++ b/drivers/spi/stm32_spi.c
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ *
+ * Driver for STMicroelectronics Serial peripheral interface (SPI)
+ */
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <errno.h>
+#include <reset.h>
+#include <spi.h>
+
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/bitfield.h>
+#include <linux/iopoll.h>
+
+/* STM32 SPI registers */
+#define STM32_SPI_CR1 0x00
+#define STM32_SPI_CR2 0x04
+#define STM32_SPI_CFG1 0x08
+#define STM32_SPI_CFG2 0x0C
+#define STM32_SPI_SR 0x14
+#define STM32_SPI_IFCR 0x18
+#define STM32_SPI_TXDR 0x20
+#define STM32_SPI_RXDR 0x30
+#define STM32_SPI_I2SCFGR 0x50
+
+/* STM32_SPI_CR1 bit fields */
+#define SPI_CR1_SPE BIT(0)
+#define SPI_CR1_MASRX BIT(8)
+#define SPI_CR1_CSTART BIT(9)
+#define SPI_CR1_CSUSP BIT(10)
+#define SPI_CR1_HDDIR BIT(11)
+#define SPI_CR1_SSI BIT(12)
+
+/* STM32_SPI_CR2 bit fields */
+#define SPI_CR2_TSIZE GENMASK(15, 0)
+
+/* STM32_SPI_CFG1 bit fields */
+#define SPI_CFG1_DSIZE GENMASK(4, 0)
+#define SPI_CFG1_DSIZE_MIN 3
+#define SPI_CFG1_FTHLV_SHIFT 5
+#define SPI_CFG1_FTHLV GENMASK(8, 5)
+#define SPI_CFG1_MBR_SHIFT 28
+#define SPI_CFG1_MBR GENMASK(30, 28)
+#define SPI_CFG1_MBR_MIN 0
+#define SPI_CFG1_MBR_MAX FIELD_GET(SPI_CFG1_MBR, SPI_CFG1_MBR)
+
+/* STM32_SPI_CFG2 bit fields */
+#define SPI_CFG2_COMM_SHIFT 17
+#define SPI_CFG2_COMM GENMASK(18, 17)
+#define SPI_CFG2_MASTER BIT(22)
+#define SPI_CFG2_LSBFRST BIT(23)
+#define SPI_CFG2_CPHA BIT(24)
+#define SPI_CFG2_CPOL BIT(25)
+#define SPI_CFG2_SSM BIT(26)
+#define SPI_CFG2_AFCNTR BIT(31)
+
+/* STM32_SPI_SR bit fields */
+#define SPI_SR_RXP BIT(0)
+#define SPI_SR_TXP BIT(1)
+#define SPI_SR_EOT BIT(3)
+#define SPI_SR_TXTF BIT(4)
+#define SPI_SR_OVR BIT(6)
+#define SPI_SR_SUSP BIT(11)
+#define SPI_SR_RXPLVL_SHIFT 13
+#define SPI_SR_RXPLVL GENMASK(14, 13)
+#define SPI_SR_RXWNE BIT(15)
+
+/* STM32_SPI_IFCR bit fields */
+#define SPI_IFCR_ALL GENMASK(11, 3)
+
+/* STM32_SPI_I2SCFGR bit fields */
+#define SPI_I2SCFGR_I2SMOD BIT(0)
+
+#define MAX_CS_COUNT 4
+
+/* SPI Master Baud Rate min/max divisor */
+#define STM32_MBR_DIV_MIN (2 << SPI_CFG1_MBR_MIN)
+#define STM32_MBR_DIV_MAX (2 << SPI_CFG1_MBR_MAX)
+
+#define STM32_SPI_TIMEOUT_US 100000
+
+/* SPI Communication mode */
+#define SPI_FULL_DUPLEX 0
+#define SPI_SIMPLEX_TX 1
+#define SPI_SIMPLEX_RX 2
+#define SPI_HALF_DUPLEX 3
+
+struct stm32_spi_priv {
+ void __iomem *base;
+ struct clk clk;
+ struct reset_ctl rst_ctl;
+ struct gpio_desc cs_gpios[MAX_CS_COUNT];
+ ulong bus_clk_rate;
+ unsigned int fifo_size;
+ unsigned int cur_bpw;
+ unsigned int cur_hz;
+ unsigned int cur_xferlen; /* current transfer length in bytes */
+ int tx_len; /* number of data to be written in bytes */
+ int rx_len; /* number of data to be read in bytes */
+ const void *tx_buf; /* data to be written, or NULL */
+ void *rx_buf; /* data to be read, or NULL */
+ u32 cur_mode;
+ bool cs_high;
+};
+
+static void stm32_spi_write_txfifo(struct stm32_spi_priv *priv)
+{
+ while ((priv->tx_len > 0) &&
+ (readl(priv->base + STM32_SPI_SR) & SPI_SR_TXP)) {
+ u32 offs = priv->cur_xferlen - priv->tx_len;
+
+ if (priv->tx_len >= sizeof(u32) &&
+ IS_ALIGNED((uintptr_t)(priv->tx_buf + offs), sizeof(u32))) {
+ const u32 *tx_buf32 = (const u32 *)(priv->tx_buf + offs);
+
+ writel(*tx_buf32, priv->base + STM32_SPI_TXDR);
+ priv->tx_len -= sizeof(u32);
+ } else if (priv->tx_len >= sizeof(u16) &&
+ IS_ALIGNED((uintptr_t)(priv->tx_buf + offs), sizeof(u16))) {
+ const u16 *tx_buf16 = (const u16 *)(priv->tx_buf + offs);
+
+ writew(*tx_buf16, priv->base + STM32_SPI_TXDR);
+ priv->tx_len -= sizeof(u16);
+ } else {
+ const u8 *tx_buf8 = (const u8 *)(priv->tx_buf + offs);
+
+ writeb(*tx_buf8, priv->base + STM32_SPI_TXDR);
+ priv->tx_len -= sizeof(u8);
+ }
+ }
+
+ debug("%s: %d bytes left\n", __func__, priv->tx_len);
+}
+
+static void stm32_spi_read_rxfifo(struct stm32_spi_priv *priv)
+{
+ u32 sr = readl(priv->base + STM32_SPI_SR);
+ u32 rxplvl = (sr & SPI_SR_RXPLVL) >> SPI_SR_RXPLVL_SHIFT;
+
+ while ((priv->rx_len > 0) &&
+ ((sr & SPI_SR_RXP) ||
+ ((sr & SPI_SR_EOT) && ((sr & SPI_SR_RXWNE) || (rxplvl > 0))))) {
+ u32 offs = priv->cur_xferlen - priv->rx_len;
+
+ if (IS_ALIGNED((uintptr_t)(priv->rx_buf + offs), sizeof(u32)) &&
+ (priv->rx_len >= sizeof(u32) || (sr & SPI_SR_RXWNE))) {
+ u32 *rx_buf32 = (u32 *)(priv->rx_buf + offs);
+
+ *rx_buf32 = readl(priv->base + STM32_SPI_RXDR);
+ priv->rx_len -= sizeof(u32);
+ } else if (IS_ALIGNED((uintptr_t)(priv->rx_buf + offs), sizeof(u16)) &&
+ (priv->rx_len >= sizeof(u16) ||
+ (!(sr & SPI_SR_RXWNE) &&
+ (rxplvl >= 2 || priv->cur_bpw > 8)))) {
+ u16 *rx_buf16 = (u16 *)(priv->rx_buf + offs);
+
+ *rx_buf16 = readw(priv->base + STM32_SPI_RXDR);
+ priv->rx_len -= sizeof(u16);
+ } else {
+ u8 *rx_buf8 = (u8 *)(priv->rx_buf + offs);
+
+ *rx_buf8 = readb(priv->base + STM32_SPI_RXDR);
+ priv->rx_len -= sizeof(u8);
+ }
+
+ sr = readl(priv->base + STM32_SPI_SR);
+ rxplvl = (sr & SPI_SR_RXPLVL) >> SPI_SR_RXPLVL_SHIFT;
+ }
+
+ debug("%s: %d bytes left\n", __func__, priv->rx_len);
+}
+
+static int stm32_spi_enable(struct stm32_spi_priv *priv)
+{
+ debug("%s\n", __func__);
+
+ /* Enable the SPI hardware */
+ setbits_le32(priv->base + STM32_SPI_CR1, SPI_CR1_SPE);
+
+ return 0;
+}
+
+static int stm32_spi_disable(struct stm32_spi_priv *priv)
+{
+ debug("%s\n", __func__);
+
+ /* Disable the SPI hardware */
+ clrbits_le32(priv->base + STM32_SPI_CR1, SPI_CR1_SPE);
+
+ return 0;
+}
+
+static int stm32_spi_claim_bus(struct udevice *slave)
+{
+ struct udevice *bus = dev_get_parent(slave);
+ struct stm32_spi_priv *priv = dev_get_priv(bus);
+
+ debug("%s\n", __func__);
+
+ /* Enable the SPI hardware */
+ return stm32_spi_enable(priv);
+}
+
+static int stm32_spi_release_bus(struct udevice *slave)
+{
+ struct udevice *bus = dev_get_parent(slave);
+ struct stm32_spi_priv *priv = dev_get_priv(bus);
+
+ debug("%s\n", __func__);
+
+ /* Disable the SPI hardware */
+ return stm32_spi_disable(priv);
+}
+
+static void stm32_spi_stopxfer(struct udevice *dev)
+{
+ struct stm32_spi_priv *priv = dev_get_priv(dev);
+ u32 cr1, sr;
+ int ret;
+
+ debug("%s\n", __func__);
+
+ cr1 = readl(priv->base + STM32_SPI_CR1);
+
+ if (!(cr1 & SPI_CR1_SPE))
+ return;
+
+ /* Wait on EOT or suspend the flow */
+ ret = readl_poll_timeout(priv->base + STM32_SPI_SR, sr,
+ !(sr & SPI_SR_EOT), 100000);
+ if (ret < 0) {
+ if (cr1 & SPI_CR1_CSTART) {
+ writel(cr1 | SPI_CR1_CSUSP, priv->base + STM32_SPI_CR1);
+ if (readl_poll_timeout(priv->base + STM32_SPI_SR,
+ sr, !(sr & SPI_SR_SUSP),
+ 100000) < 0)
+ dev_err(dev, "Suspend request timeout\n");
+ }
+ }
+
+ /* clear status flags */
+ setbits_le32(priv->base + STM32_SPI_IFCR, SPI_IFCR_ALL);
+}
+
+static int stm32_spi_set_cs(struct udevice *dev, unsigned int cs, bool enable)
+{
+ struct stm32_spi_priv *priv = dev_get_priv(dev);
+
+ debug("%s: cs=%d enable=%d\n", __func__, cs, enable);
+
+ if (cs >= MAX_CS_COUNT)
+ return -ENODEV;
+
+ if (!dm_gpio_is_valid(&priv->cs_gpios[cs]))
+ return -EINVAL;
+
+ if (priv->cs_high)
+ enable = !enable;
+
+ return dm_gpio_set_value(&priv->cs_gpios[cs], enable ? 1 : 0);
+}
+
+static int stm32_spi_set_mode(struct udevice *bus, uint mode)
+{
+ struct stm32_spi_priv *priv = dev_get_priv(bus);
+ u32 cfg2_clrb = 0, cfg2_setb = 0;
+
+ debug("%s: mode=%d\n", __func__, mode);
+
+ if (mode & SPI_CPOL)
+ cfg2_setb |= SPI_CFG2_CPOL;
+ else
+ cfg2_clrb |= SPI_CFG2_CPOL;
+
+ if (mode & SPI_CPHA)
+ cfg2_setb |= SPI_CFG2_CPHA;
+ else
+ cfg2_clrb |= SPI_CFG2_CPHA;
+
+ if (mode & SPI_LSB_FIRST)
+ cfg2_setb |= SPI_CFG2_LSBFRST;
+ else
+ cfg2_clrb |= SPI_CFG2_LSBFRST;
+
+ if (cfg2_clrb || cfg2_setb)
+ clrsetbits_le32(priv->base + STM32_SPI_CFG2,
+ cfg2_clrb, cfg2_setb);
+
+ if (mode & SPI_CS_HIGH)
+ priv->cs_high = true;
+ else
+ priv->cs_high = false;
+ return 0;
+}
+
+static int stm32_spi_set_fthlv(struct udevice *dev, u32 xfer_len)
+{
+ struct stm32_spi_priv *priv = dev_get_priv(dev);
+ u32 fthlv, half_fifo;
+
+ /* data packet should not exceed 1/2 of fifo space */
+ half_fifo = (priv->fifo_size / 2);
+
+ /* data_packet should not exceed transfer length */
+ fthlv = (half_fifo > xfer_len) ? xfer_len : half_fifo;
+
+ /* align packet size with data registers access */
+ fthlv -= (fthlv % 4);
+
+ if (!fthlv)
+ fthlv = 1;
+ clrsetbits_le32(priv->base + STM32_SPI_CFG1, SPI_CFG1_FTHLV,
+ (fthlv - 1) << SPI_CFG1_FTHLV_SHIFT);
+
+ return 0;
+}
+
+static int stm32_spi_set_speed(struct udevice *bus, uint hz)
+{
+ struct stm32_spi_priv *priv = dev_get_priv(bus);
+ u32 div, mbrdiv;
+
+ debug("%s: hz=%d\n", __func__, hz);
+
+ if (priv->cur_hz == hz)
+ return 0;
+
+ div = DIV_ROUND_UP(priv->bus_clk_rate, hz);
+
+ if (div < STM32_MBR_DIV_MIN ||
+ div > STM32_MBR_DIV_MAX)
+ return -EINVAL;
+
+ /* Determine the first power of 2 greater than or equal to div */
+ if (div & (div - 1))
+ mbrdiv = fls(div);
+ else
+ mbrdiv = fls(div) - 1;
+
+ if ((mbrdiv - 1) < 0)
+ return -EINVAL;
+
+ clrsetbits_le32(priv->base + STM32_SPI_CFG1, SPI_CFG1_MBR,
+ (mbrdiv - 1) << SPI_CFG1_MBR_SHIFT);
+
+ priv->cur_hz = hz;
+
+ return 0;
+}
+
+static int stm32_spi_xfer(struct udevice *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct udevice *bus = dev_get_parent(slave);
+ struct dm_spi_slave_platdata *slave_plat;
+ struct stm32_spi_priv *priv = dev_get_priv(bus);
+ u32 sr;
+ u32 ifcr = 0;
+ u32 xferlen;
+ u32 mode;
+ int xfer_status = 0;
+
+ xferlen = bitlen / 8;
+
+ if (xferlen <= SPI_CR2_TSIZE)
+ writel(xferlen, priv->base + STM32_SPI_CR2);
+ else
+ return -EMSGSIZE;
+
+ priv->tx_buf = dout;
+ priv->rx_buf = din;
+ priv->tx_len = priv->tx_buf ? bitlen / 8 : 0;
+ priv->rx_len = priv->rx_buf ? bitlen / 8 : 0;
+
+ mode = SPI_FULL_DUPLEX;
+ if (!priv->tx_buf)
+ mode = SPI_SIMPLEX_RX;
+ else if (!priv->rx_buf)
+ mode = SPI_SIMPLEX_TX;
+
+ if (priv->cur_xferlen != xferlen || priv->cur_mode != mode) {
+ priv->cur_mode = mode;
+ priv->cur_xferlen = xferlen;
+
+ /* Disable the SPI hardware to unlock CFG1/CFG2 registers */
+ stm32_spi_disable(priv);
+
+ clrsetbits_le32(priv->base + STM32_SPI_CFG2, SPI_CFG2_COMM,
+ mode << SPI_CFG2_COMM_SHIFT);
+
+ stm32_spi_set_fthlv(bus, xferlen);
+
+ /* Enable the SPI hardware */
+ stm32_spi_enable(priv);
+ }
+
+ debug("%s: priv->tx_len=%d priv->rx_len=%d\n", __func__,
+ priv->tx_len, priv->rx_len);
+
+ slave_plat = dev_get_parent_platdata(slave);
+ if (flags & SPI_XFER_BEGIN)
+ stm32_spi_set_cs(bus, slave_plat->cs, false);
+
+ /* Be sure to have data in fifo before starting data transfer */
+ if (priv->tx_buf)
+ stm32_spi_write_txfifo(priv);
+
+ setbits_le32(priv->base + STM32_SPI_CR1, SPI_CR1_CSTART);
+
+ while (1) {
+ sr = readl(priv->base + STM32_SPI_SR);
+
+ if (sr & SPI_SR_OVR) {
+ dev_err(bus, "Overrun: RX data lost\n");
+ xfer_status = -EIO;
+ break;
+ }
+
+ if (sr & SPI_SR_SUSP) {
+ dev_warn(bus, "System too slow is limiting data throughput\n");
+
+ if (priv->rx_buf && priv->rx_len > 0)
+ stm32_spi_read_rxfifo(priv);
+
+ ifcr |= SPI_SR_SUSP;
+ }
+
+ if (sr & SPI_SR_TXTF)
+ ifcr |= SPI_SR_TXTF;
+
+ if (sr & SPI_SR_TXP)
+ if (priv->tx_buf && priv->tx_len > 0)
+ stm32_spi_write_txfifo(priv);
+
+ if (sr & SPI_SR_RXP)
+ if (priv->rx_buf && priv->rx_len > 0)
+ stm32_spi_read_rxfifo(priv);
+
+ if (sr & SPI_SR_EOT) {
+ if (priv->rx_buf && priv->rx_len > 0)
+ stm32_spi_read_rxfifo(priv);
+ break;
+ }
+
+ writel(ifcr, priv->base + STM32_SPI_IFCR);
+ }
+
+ /* clear status flags */
+ setbits_le32(priv->base + STM32_SPI_IFCR, SPI_IFCR_ALL);
+ stm32_spi_stopxfer(bus);
+
+ if (flags & SPI_XFER_END)
+ stm32_spi_set_cs(bus, slave_plat->cs, true);
+
+ return xfer_status;
+}
+
+static int stm32_spi_get_fifo_size(struct udevice *dev)
+{
+ struct stm32_spi_priv *priv = dev_get_priv(dev);
+ u32 count = 0;
+
+ stm32_spi_enable(priv);
+
+ while (readl(priv->base + STM32_SPI_SR) & SPI_SR_TXP)
+ writeb(++count, priv->base + STM32_SPI_TXDR);
+
+ stm32_spi_disable(priv);
+
+ debug("%s %d x 8-bit fifo size\n", __func__, count);
+
+ return count;
+}
+
+static int stm32_spi_probe(struct udevice *dev)
+{
+ struct stm32_spi_priv *priv = dev_get_priv(dev);
+ unsigned long clk_rate;
+ int ret;
+ int i;
+
+ priv->base = dev_remap_addr(dev);
+ if (!priv->base)
+ return -EINVAL;
+
+ /* enable clock */
+ ret = clk_get_by_index(dev, 0, &priv->clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_enable(&priv->clk);
+ if (ret < 0)
+ return ret;
+
+ clk_rate = clk_get_rate(&priv->clk);
+ if (!clk_rate) {
+ ret = -EINVAL;
+ goto clk_err;
+ }
+
+ priv->bus_clk_rate = clk_rate;
+
+ /* perform reset */
+ ret = reset_get_by_index(dev, 0, &priv->rst_ctl);
+ if (ret < 0)
+ goto clk_err;
+
+ reset_assert(&priv->rst_ctl);
+ udelay(2);
+ reset_deassert(&priv->rst_ctl);
+
+ ret = gpio_request_list_by_name(dev, "cs-gpios", priv->cs_gpios,
+ ARRAY_SIZE(priv->cs_gpios), 0);
+ if (ret < 0) {
+ pr_err("Can't get %s cs gpios: %d", dev->name, ret);
+ goto reset_err;
+ }
+
+ priv->fifo_size = stm32_spi_get_fifo_size(dev);
+
+ priv->cur_mode = SPI_FULL_DUPLEX;
+ priv->cur_xferlen = 0;
+ priv->cur_bpw = SPI_DEFAULT_WORDLEN;
+ clrsetbits_le32(priv->base + STM32_SPI_CFG1, SPI_CFG1_DSIZE,
+ priv->cur_bpw - 1);
+
+ for (i = 0; i < ARRAY_SIZE(priv->cs_gpios); i++) {
+ if (!dm_gpio_is_valid(&priv->cs_gpios[i]))
+ continue;
+
+ dm_gpio_set_dir_flags(&priv->cs_gpios[i],
+ GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+ }
+
+ /* Ensure I2SMOD bit is kept cleared */
+ clrbits_le32(priv->base + STM32_SPI_I2SCFGR, SPI_I2SCFGR_I2SMOD);
+
+ /*
+ * - SS input value high
+ * - transmitter half duplex direction
+ * - automatic communication suspend when RX-Fifo is full
+ */
+ setbits_le32(priv->base + STM32_SPI_CR1,
+ SPI_CR1_SSI | SPI_CR1_HDDIR | SPI_CR1_MASRX);
+
+ /*
+ * - Set the master mode (default Motorola mode)
+ * - Consider 1 master/n slaves configuration and
+ * SS input value is determined by the SSI bit
+ * - keep control of all associated GPIOs
+ */
+ setbits_le32(priv->base + STM32_SPI_CFG2,
+ SPI_CFG2_MASTER | SPI_CFG2_SSM | SPI_CFG2_AFCNTR);
+
+ return 0;
+
+reset_err:
+ reset_free(&priv->rst_ctl);
+
+clk_err:
+ clk_disable(&priv->clk);
+ clk_free(&priv->clk);
+
+ return ret;
+};
+
+static int stm32_spi_remove(struct udevice *dev)
+{
+ struct stm32_spi_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ stm32_spi_stopxfer(dev);
+ stm32_spi_disable(priv);
+
+ ret = reset_assert(&priv->rst_ctl);
+ if (ret < 0)
+ return ret;
+
+ reset_free(&priv->rst_ctl);
+
+ ret = clk_disable(&priv->clk);
+ if (ret < 0)
+ return ret;
+
+ clk_free(&priv->clk);
+
+ return ret;
+};
+
+static const struct dm_spi_ops stm32_spi_ops = {
+ .claim_bus = stm32_spi_claim_bus,
+ .release_bus = stm32_spi_release_bus,
+ .set_mode = stm32_spi_set_mode,
+ .set_speed = stm32_spi_set_speed,
+ .xfer = stm32_spi_xfer,
+};
+
+static const struct udevice_id stm32_spi_ids[] = {
+ { .compatible = "st,stm32h7-spi", },
+ { }
+};
+
+U_BOOT_DRIVER(stm32_spi) = {
+ .name = "stm32_spi",
+ .id = UCLASS_SPI,
+ .of_match = stm32_spi_ids,
+ .ops = &stm32_spi_ops,
+ .priv_auto_alloc_size = sizeof(struct stm32_spi_priv),
+ .probe = stm32_spi_probe,
+ .remove = stm32_spi_remove,
+};
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b01dbc446df..dbafb74a34d 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -26,6 +26,13 @@ config BCM2835_WDT
This provides basic infrastructure to support BCM2835/2836 watchdog
hardware, with a max timeout of ~15secs.
+config IMX_WATCHDOG
+ bool "Enable Watchdog Timer support for IMX and LSCH2 of NXP"
+ select HW_WATCHDOG
+ help
+ Select this to enable the IMX and LSCH2 of Layerscape watchdog
+ driver.
+
config OMAP_WATCHDOG
bool "TI OMAP watchdog driver"
depends on ARCH_OMAP2PLUS
@@ -59,14 +66,6 @@ config WDT
What exactly happens when the timer expires is up to a particular
device/driver.
-config WDT_SANDBOX
- bool "Enable Watchdog Timer support for Sandbox"
- depends on SANDBOX && WDT
- help
- Enable Watchdog Timer support in Sandbox. This is a dummy device that
- can be probed and supports all of the methods of WDT, but does not
- really do anything.
-
config WDT_ARMADA_37XX
bool "Marvell Armada 37xx watchdog timer support"
depends on WDT && ARMADA_3700
@@ -87,6 +86,13 @@ config WDT_ASPEED
It currently does not support Boot Flash Addressing Mode Detection or
Second Boot.
+config WDT_AT91
+ bool "AT91 watchdog timer support"
+ depends on WDT
+ help
+ Select this to enable Microchip watchdog timer, which can be found on
+ some AT91 devices.
+
config WDT_BCM6345
bool "BCM6345 watchdog timer support"
depends on WDT && (ARCH_BMIPS || ARCH_BCM6858 || ARCH_BCM63158)
@@ -95,21 +101,6 @@ config WDT_BCM6345
The watchdog timer is stopped when initialized.
It performs full SoC reset.
-config WDT_ORION
- bool "Orion watchdog timer support"
- depends on WDT
- select CLK
- help
- Select this to enable Orion watchdog timer, which can be found on some
- Marvell Armada chips.
-
-config WDT_SP805
- bool "SP805 watchdog timer support"
- depends on WDT
- help
- Select this to enable SP805 watchdog timer, which can be found on some
- nxp layerscape chips.
-
config WDT_CDNS
bool "Cadence watchdog timer support"
depends on WDT
@@ -118,6 +109,20 @@ config WDT_CDNS
Select this to enable Cadence watchdog timer, which can be found on some
Xilinx Microzed Platform.
+config WDT_MPC8xx
+ bool "MPC8xx watchdog timer support"
+ depends on WDT && MPC8xx
+ select CONFIG_MPC8xx_WATCHDOG
+ help
+ Select this to enable mpc8xx watchdog timer
+
+config WDT_MT7621
+ bool "MediaTek MT7621 watchdog timer support"
+ depends on WDT && SOC_MT7628
+ help
+ Select this to enable Ralink / Mediatek watchdog timer,
+ which can be found on some MediaTek chips.
+
config WDT_MTK
bool "MediaTek watchdog timer support"
depends on WDT && ARCH_MEDIATEK
@@ -126,39 +131,43 @@ config WDT_MTK
The watchdog timer is stopped when initialized.
It performs full SoC reset.
-config XILINX_TB_WATCHDOG
- bool "Xilinx Axi watchdog timer support"
+config WDT_ORION
+ bool "Orion watchdog timer support"
depends on WDT
- imply WATCHDOG
+ select CLK
help
- Select this to enable Xilinx Axi watchdog timer, which can be found on some
- Xilinx Microblaze Platforms.
+ Select this to enable Orion watchdog timer, which can be found on some
+ Marvell Armada chips.
-config IMX_WATCHDOG
- bool "Enable Watchdog Timer support for IMX and LSCH2 of NXP"
- select HW_WATCHDOG
+config WDT_SANDBOX
+ bool "Enable Watchdog Timer support for Sandbox"
+ depends on SANDBOX && WDT
help
- Select this to enable the IMX and LSCH2 of Layerscape watchdog
- driver.
+ Enable Watchdog Timer support in Sandbox. This is a dummy device that
+ can be probed and supports all of the methods of WDT, but does not
+ really do anything.
-config WDT_AT91
- bool "AT91 watchdog timer support"
+config WDT_SP805
+ bool "SP805 watchdog timer support"
depends on WDT
help
- Select this to enable Microchip watchdog timer, which can be found on
- some AT91 devices.
+ Select this to enable SP805 watchdog timer, which can be found on some
+ nxp layerscape chips.
-config WDT_MT7621
- bool "MediaTek MT7621 watchdog timer support"
- depends on WDT && SOC_MT7628
+config WDT_STM32MP
+ bool "IWDG watchdog driver for STM32 MP's family"
+ depends on WDT
+ imply WATCHDOG
help
- Select this to enable Ralink / Mediatek watchdog timer,
- which can be found on some MediaTek chips.
+ Enable the STM32 watchdog (IWDG) driver. Enable support to
+ configure STM32's on-SoC watchdog.
-config WDT_MPC8xx
- bool "MPC8xx watchdog timer support"
- depends on WDT && MPC8xx
+config XILINX_TB_WATCHDOG
+ bool "Xilinx Axi watchdog timer support"
+ depends on WDT
+ imply WATCHDOG
help
- Select this to enable mpc8xx watchdog timer
+ Select this to enable Xilinx Axi watchdog timer, which can be found on some
+ Xilinx Microblaze Platforms.
endmenu
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 6f20e73810a..e3f4fdb406f 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
obj-$(CONFIG_WDT_MTK) += mtk_wdt.o
obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
+obj-$(CONFIG_WDT_STM32MP) += stm32mp_wdt.o
diff --git a/drivers/watchdog/stm32mp_wdt.c b/drivers/watchdog/stm32mp_wdt.c
new file mode 100644
index 00000000000..8093d0a9f46
--- /dev/null
+++ b/drivers/watchdog/stm32mp_wdt.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <syscon.h>
+#include <wdt.h>
+#include <asm/io.h>
+#include <linux/iopoll.h>
+
+/* IWDG registers */
+#define IWDG_KR 0x00 /* Key register */
+#define IWDG_PR 0x04 /* Prescaler Register */
+#define IWDG_RLR 0x08 /* ReLoad Register */
+#define IWDG_SR 0x0C /* Status Register */
+
+/* IWDG_KR register bit mask */
+#define KR_KEY_RELOAD 0xAAAA /* Reload counter enable */
+#define KR_KEY_ENABLE 0xCCCC /* Peripheral enable */
+#define KR_KEY_EWA 0x5555 /* Write access enable */
+
+/* IWDG_PR register bit values */
+#define PR_256 0x06 /* Prescaler set to 256 */
+
+/* IWDG_RLR register values */
+#define RLR_MAX 0xFFF /* Max value supported by reload register */
+
+/* IWDG_SR register bit values */
+#define SR_PVU BIT(0) /* Watchdog prescaler value update */
+#define SR_RVU BIT(1) /* Watchdog counter reload value update */
+
+struct stm32mp_wdt_priv {
+ fdt_addr_t base; /* registers addr in physical memory */
+ unsigned long wdt_clk_rate; /* Watchdog dedicated clock rate */
+};
+
+static int stm32mp_wdt_reset(struct udevice *dev)
+{
+ struct stm32mp_wdt_priv *priv = dev_get_priv(dev);
+
+ writel(KR_KEY_RELOAD, priv->base + IWDG_KR);
+
+ return 0;
+}
+
+static int stm32mp_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
+{
+ struct stm32mp_wdt_priv *priv = dev_get_priv(dev);
+ int reload;
+ u32 val;
+ int ret;
+
+ /* Prescaler fixed to 256 */
+ reload = timeout_ms * priv->wdt_clk_rate / 256;
+ if (reload > RLR_MAX + 1)
+ /* Force to max watchdog counter reload value */
+ reload = RLR_MAX + 1;
+ else if (!reload)
+ /* Force to min watchdog counter reload value */
+ reload = priv->wdt_clk_rate / 256;
+
+ /* Set prescaler & reload registers */
+ writel(KR_KEY_EWA, priv->base + IWDG_KR);
+ writel(PR_256, priv->base + IWDG_PR);
+ writel(reload - 1, priv->base + IWDG_RLR);
+
+ /* Enable watchdog */
+ writel(KR_KEY_ENABLE, priv->base + IWDG_KR);
+
+ /* Wait for the registers to be updated */
+ ret = readl_poll_timeout(priv->base + IWDG_SR, val,
+ val & (SR_PVU | SR_RVU), CONFIG_SYS_HZ);
+
+ if (ret < 0) {
+ pr_err("Updating IWDG registers timeout");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int stm32mp_wdt_probe(struct udevice *dev)
+{
+ struct stm32mp_wdt_priv *priv = dev_get_priv(dev);
+ struct clk clk;
+ int ret;
+
+ debug("IWDG init\n");
+
+ priv->base = devfdt_get_addr(dev);
+ if (priv->base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ /* Enable clock */
+ ret = clk_get_by_name(dev, "pclk", &clk);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(&clk);
+ if (ret)
+ return ret;
+
+ /* Get LSI clock */
+ ret = clk_get_by_name(dev, "lsi", &clk);
+ if (ret)
+ return ret;
+
+ priv->wdt_clk_rate = clk_get_rate(&clk);
+
+ debug("IWDG init done\n");
+
+ return 0;
+}
+
+static const struct wdt_ops stm32mp_wdt_ops = {
+ .start = stm32mp_wdt_start,
+ .reset = stm32mp_wdt_reset,
+};
+
+static const struct udevice_id stm32mp_wdt_match[] = {
+ { .compatible = "st,stm32mp1-iwdg" },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(stm32mp_wdt) = {
+ .name = "stm32mp-wdt",
+ .id = UCLASS_WDT,
+ .of_match = stm32mp_wdt_match,
+ .priv_auto_alloc_size = sizeof(struct stm32mp_wdt_priv),
+ .probe = stm32mp_wdt_probe,
+ .ops = &stm32mp_wdt_ops,
+};
diff --git a/env/Kconfig b/env/Kconfig
index 1e10c7a4c46..5651685c150 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -2,18 +2,12 @@ menu "Environment"
config ENV_IS_NOWHERE
bool "Environment is not stored"
- depends on !ENV_IS_IN_EEPROM
- depends on !ENV_IS_IN_EXT4
- depends on !ENV_IS_IN_FAT
- depends on !ENV_IS_IN_FLASH
- depends on !ENV_IS_IN_MMC
- depends on !ENV_IS_IN_NAND
- depends on !ENV_IS_IN_NVRAM
- depends on !ENV_IS_IN_ONENAND
- depends on !ENV_IS_IN_REMOTE
- depends on !ENV_IS_IN_SPI_FLASH
- depends on !ENV_IS_IN_UBI
- default y
+ default y if !ENV_IS_IN_EEPROM && !ENV_IS_IN_EXT4 && \
+ !ENV_IS_IN_FAT && !ENV_IS_IN_FLASH && \
+ !ENV_IS_IN_MMC && !ENV_IS_IN_NAND && \
+ !ENV_IS_IN_NVRAM && !ENV_IS_IN_ONENAND && \
+ !ENV_IS_IN_REMOTE && !ENV_IS_IN_SPI_FLASH && \
+ !ENV_IS_IN_UBI
help
Define this if you don't want to or can't have an environment stored
on a storage medium. In this case the environment will still exist
diff --git a/env/ext4.c b/env/ext4.c
index 388474a11c7..9947381bfdb 100644
--- a/env/ext4.c
+++ b/env/ext4.c
@@ -30,6 +30,16 @@
#include <ext4fs.h>
#include <mmc.h>
+__weak const char *env_ext4_get_intf(void)
+{
+ return (const char *)CONFIG_ENV_EXT4_INTERFACE;
+}
+
+__weak const char *env_ext4_get_dev_part(void)
+{
+ return (const char *)CONFIG_ENV_EXT4_DEVICE_AND_PART;
+}
+
#ifdef CONFIG_CMD_SAVEENV
static int env_ext4_save(void)
{
@@ -38,13 +48,14 @@ static int env_ext4_save(void)
disk_partition_t info;
int dev, part;
int err;
+ const char *ifname = env_ext4_get_intf();
+ const char *dev_and_part = env_ext4_get_dev_part();
err = env_export(&env_new);
if (err)
return err;
- part = blk_get_device_part_str(CONFIG_ENV_EXT4_INTERFACE,
- CONFIG_ENV_EXT4_DEVICE_AND_PART,
+ part = blk_get_device_part_str(ifname, dev_and_part,
&dev_desc, &info, 1);
if (part < 0)
return 1;
@@ -54,8 +65,7 @@ static int env_ext4_save(void)
if (!ext4fs_mount(info.size)) {
printf("\n** Unable to use %s %s for saveenv **\n",
- CONFIG_ENV_EXT4_INTERFACE,
- CONFIG_ENV_EXT4_DEVICE_AND_PART);
+ ifname, dev_and_part);
return 1;
}
@@ -65,8 +75,7 @@ static int env_ext4_save(void)
if (err == -1) {
printf("\n** Unable to write \"%s\" from %s%d:%d **\n",
- CONFIG_ENV_EXT4_FILE, CONFIG_ENV_EXT4_INTERFACE, dev,
- part);
+ CONFIG_ENV_EXT4_FILE, ifname, dev, part);
return 1;
}
@@ -83,14 +92,15 @@ static int env_ext4_load(void)
int dev, part;
int err;
loff_t off;
+ const char *ifname = env_ext4_get_intf();
+ const char *dev_and_part = env_ext4_get_dev_part();
#ifdef CONFIG_MMC
- if (!strcmp(CONFIG_ENV_EXT4_INTERFACE, "mmc"))
+ if (!strcmp(ifname, "mmc"))
mmc_initialize(NULL);
#endif
- part = blk_get_device_part_str(CONFIG_ENV_EXT4_INTERFACE,
- CONFIG_ENV_EXT4_DEVICE_AND_PART,
+ part = blk_get_device_part_str(ifname, dev_and_part,
&dev_desc, &info, 1);
if (part < 0)
goto err_env_relocate;
@@ -100,8 +110,7 @@ static int env_ext4_load(void)
if (!ext4fs_mount(info.size)) {
printf("\n** Unable to use %s %s for loading the env **\n",
- CONFIG_ENV_EXT4_INTERFACE,
- CONFIG_ENV_EXT4_DEVICE_AND_PART);
+ ifname, dev_and_part);
goto err_env_relocate;
}
@@ -111,8 +120,7 @@ static int env_ext4_load(void)
if (err == -1) {
printf("\n** Unable to read \"%s\" from %s%d:%d **\n",
- CONFIG_ENV_EXT4_FILE, CONFIG_ENV_EXT4_INTERFACE, dev,
- part);
+ CONFIG_ENV_EXT4_FILE, ifname, dev, part);
goto err_env_relocate;
}
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
index e8be51a1559..1d385e0985c 100644
--- a/include/configs/stm32mp1.h
+++ b/include/configs/stm32mp1.h
@@ -38,6 +38,15 @@
*/
#define CONFIG_SYS_LOAD_ADDR STM32_DDR_BASE
+#if defined(CONFIG_ENV_IS_IN_UBI)
+#define CONFIG_ENV_UBI_VOLUME_REDUND "uboot_config_r"
+#endif
+
+#if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#define CONFIG_ENV_SECT_SIZE SZ_256K
+#define CONFIG_ENV_OFFSET 0x00280000
+#endif
+
/* ATAGs */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
@@ -68,16 +77,29 @@
/*MMC SD*/
#define CONFIG_SYS_MMC_MAX_DEVICE 3
+/* Ethernet need */
+#ifdef CONFIG_DWC_ETH_QOS
+#define CONFIG_SYS_NONCACHED_MEMORY (1 * SZ_1M) /* 1M */
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_SYS_AUTOLOAD "no"
+#endif
+
/*****************************************************************************/
#ifdef CONFIG_DISTRO_DEFAULTS
/*****************************************************************************/
#if !defined(CONFIG_SPL_BUILD)
+/* NAND support */
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 0) \
- func(MMC, mmc, 2)
+ func(MMC, mmc, 2) \
+ func(PXE, pxe, na)
+
/*
* bootcmd for stm32mp1:
* for serial/usb: execute the stm32prog command
@@ -99,6 +121,14 @@
#include <config_distro_bootcmd.h>
+#if defined(CONFIG_STM32_QSPI) || defined(CONFIG_NAND_STM32_FMC)
+#define CONFIG_SYS_MTDPARTS_RUNTIME
+#endif
+
+#define STM32MP_MTDPARTS \
+ "mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),-(nor_user)\0" \
+ "mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),-(UBI)\0"
+
/*
* memory layout for 32M uncompressed/compressed kernel,
* 1M fdt, 1M script, 1M pxe and 1M for splashimage
@@ -114,6 +144,7 @@
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
STM32MP_BOOTCMD \
+ STM32MP_MTDPARTS \
BOOTENV
#endif /* ifndef CONFIG_SPL_BUILD */