Merge branch 'master' of git://git.denx.de/u-boot-usb

- Various fastboot, dwc2/stm32 updates

39 files changed, 680 insertions, 251 deletions

diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi
index c069875486..0aae69b0a0 100644
--- a/arch/arm/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi
@@ -375,6 +375,13 @@
 				};
 			};
 
+			stusb1600_pins_a: stusb1600-0 {
+				pins {
+					pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
+					bias-pull-up;
+				};
+			};
+
 			uart4_pins_a: uart4-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
index af7acfa037..0f32a38dc9 100644
--- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
@@ -11,6 +11,7 @@
 	aliases {
 		i2c3 = &i2c4;
 		mmc0 = &sdmmc1;
+		usb0 = &usbotg_hs;
 	};
 	config {
 		u-boot,boot-led = "heartbeat";
@@ -190,7 +191,7 @@
 };
 
 &usbotg_hs {
-	usb1600;
+	u-boot,force-b-session-valid;
 	hnp-srp-disable;
 };
 
diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts
index 0882765d0c..e36773dde9 100644
--- a/arch/arm/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/dts/stm32mp157a-dk1.dts
@@ -67,6 +67,24 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 
+	typec: stusb1600@28 {
+		compatible = "st,stusb1600";
+		reg = <0x28>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpioi>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&stusb1600_pins_a>;
+
+		status = "okay";
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "sink";
+			power-opmode = "default";
+		};
+	};
+
 	pmic: stpmic@33 {
 		compatible = "st,stpmic1";
 		reg = <0x33>;
@@ -249,11 +267,25 @@
 	status = "okay";
 };
 
+&usbotg_hs {
+	dr_mode = "peripheral";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
 &usbphyc {
-	vdd3v3-supply = <&vdd_usb>;
 	status = "okay";
 };
 
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
+
 &vrefbuf {
 	regulator-min-microvolt = <2500000>;
 	regulator-max-microvolt = <2500000>;
diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
index 2664c9ce90..0366782fda 100644
--- a/arch/arm/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -382,18 +382,10 @@
 	status = "okay";
 };
 
-&usbotg_hs {
-	usb33d-supply = <&usb33>;
-};
-
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
-	vdda1v1-supply = <&reg11>;
-	vdda1v8-supply = <&reg18>;
 };
 
 &usbphyc_port1 {
 	phy-supply = <&vdd_usb>;
-	vdda1v1-supply = <&reg11>;
-	vdda1v8-supply = <&reg18>;
 };
diff --git a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
index 8b92b1fa2e..5b19e44d2f 100644
--- a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi
@@ -12,6 +12,7 @@
 		i2c4 = &i2c5;
 		pinctrl2 = &stmfx_pinctrl;
 		spi0 = &qspi;
+		usb0 = &usbotg_hs;
 	};
 };
 
diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp157c.dtsi
index 7eb4bee31c..94634336a5 100644
--- a/arch/arm/dts/stm32mp157c.dtsi
+++ b/arch/arm/dts/stm32mp157c.dtsi
@@ -825,7 +825,7 @@
 		};
 
 		usbotg_hs: usb-otg@49000000 {
-			compatible = "snps,dwc2";
+			compatible = "st,stm32mp1-hsotg", "snps,dwc2";
 			reg = <0x49000000 0x10000>;
 			clocks = <&rcc USBO_K>;
 			clock-names = "otg";
@@ -836,6 +836,7 @@
 			g-np-tx-fifo-size = <32>;
 			g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
 			dr_mode = "otg";
+			usb33d-supply = <&usb33>;
 			status = "disabled";
 		};
 
@@ -1161,6 +1162,8 @@
 			reg = <0x5a006000 0x1000>;
 			clocks = <&rcc USBPHY_K>;
 			resets = <&rcc USBPHY_R>;
+			vdda1v1-supply = <&reg11>;
+			vdda1v8-supply = <&reg18>;
 			status = "disabled";
 
 			usbphyc_port0: usb-phy@0 {
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 24d299ac33..76917b022e 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -7,7 +7,9 @@
 #include <config.h>
 #include <clk.h>
 #include <dm.h>
+#include <g_dnl.h>
 #include <generic-phy.h>
+#include <i2c.h>
 #include <led.h>
 #include <misc.h>
 #include <phy.h>
@@ -58,11 +60,6 @@
  */
 DECLARE_GLOBAL_DATA_PTR;
 
-#define STM32MP_GUSBCFG 0x40002407
-
-#define STM32MP_GGPIO 0x38
-#define STM32MP_GGPIO_VBUS_SENSING BIT(21)
-
 #define USB_WARNING_LOW_THRESHOLD_UV	660000
 #define USB_START_LOW_THRESHOLD_UV	1230000
 #define USB_START_HIGH_THRESHOLD_UV	2100000
@@ -155,149 +152,75 @@ static void board_key_check(void)
 #endif
 }
 
-static struct dwc2_plat_otg_data stm32mp_otg_data = {
-	.usb_gusbcfg = STM32MP_GUSBCFG,
-};
+#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
 
-static struct reset_ctl usbotg_reset;
+/* STMicroelectronics STUSB1600 Type-C controller */
+#define STUSB1600_CC_CONNECTION_STATUS		0x0E
 
-int board_usb_init(int index, enum usb_init_type init)
+/* STUSB1600_CC_CONNECTION_STATUS bitfields */
+#define STUSB1600_CC_ATTACH			BIT(0)
+
+static int stusb1600_init(struct udevice **dev_stusb1600)
 {
-	struct fdtdec_phandle_args args;
-	struct udevice *dev;
-	const void *blob = gd->fdt_blob;
-	struct clk clk;
-	struct phy phy;
-	int node;
-	int phy_provider;
+	ofnode node;
+	struct udevice *dev, *bus;
 	int ret;
+	u32 chip_addr;
 
-	/* find the usb otg node */
-	node = fdt_node_offset_by_compatible(blob, -1, "snps,dwc2");
-	if (node < 0) {
-		debug("Not found usb_otg device\n");
-		return -ENODEV;
-	}
+	*dev_stusb1600 = NULL;
 
-	if (!fdtdec_get_is_enabled(blob, node)) {
-		debug("stm32 usbotg is disabled in the device tree\n");
+	/* if node stusb1600 is present, means DK1 or DK2 board */
+	node = ofnode_by_compatible(ofnode_null(), "st,stusb1600");
+	if (!ofnode_valid(node))
 		return -ENODEV;
-	}
-
-	/* Enable clock */
-	ret = fdtdec_parse_phandle_with_args(blob, node, "clocks",
-					     "#clock-cells", 0, 0, &args);
-	if (ret) {
-		debug("usbotg has no clocks defined in the device tree\n");
-		return ret;
-	}
 
-	ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &dev);
+	ret = ofnode_read_u32(node, "reg", &chip_addr);
 	if (ret)
-		return ret;
+		return -EINVAL;
 
-	if (args.args_count != 1) {
-		debug("Can't find clock ID in the device tree\n");
-		return -ENODATA;
-	}
-
-	clk.dev = dev;
-	clk.id = args.args[0];
-
-	ret = clk_enable(&clk);
-	if (ret) {
-		debug("Failed to enable usbotg clock\n");
-		return ret;
-	}
-
-	/* Reset */
-	ret = fdtdec_parse_phandle_with_args(blob, node, "resets",
-					     "#reset-cells", 0, 0, &args);
+	ret = uclass_get_device_by_ofnode(UCLASS_I2C, ofnode_get_parent(node),
+					  &bus);
 	if (ret) {
-		debug("usbotg has no resets defined in the device tree\n");
-		goto clk_err;
+		printf("bus for stusb1600 not found\n");
+		return -ENODEV;
 	}
 
-	ret = uclass_get_device_by_of_offset(UCLASS_RESET, args.node, &dev);
-	if (ret || args.args_count != 1)
-		goto clk_err;
-
-	usbotg_reset.dev = dev;
-	usbotg_reset.id = args.args[0];
-
-	reset_assert(&usbotg_reset);
-	udelay(2);
-	reset_deassert(&usbotg_reset);
-
-	/* Get USB PHY */
-	ret = fdtdec_parse_phandle_with_args(blob, node, "phys",
-					     "#phy-cells", 0, 0, &args);
-	if (!ret) {
-		phy_provider = fdt_parent_offset(blob, args.node);
-		ret = uclass_get_device_by_of_offset(UCLASS_PHY,
-						     phy_provider, &dev);
-		if (ret)
-			goto clk_err;
-
-		phy.dev = dev;
-		phy.id = fdtdec_get_uint(blob, args.node, "reg", -1);
-
-		ret = generic_phy_power_on(&phy);
-		if (ret) {
-			debug("unable to power on the phy\n");
-			goto clk_err;
-		}
+	ret = dm_i2c_probe(bus, chip_addr, 0, &dev);
+	if (!ret)
+		*dev_stusb1600 = dev;
 
-		ret = generic_phy_init(&phy);
-		if (ret) {
-			debug("failed to init usb phy\n");
-			goto phy_power_err;
-		}
-	}
+	return ret;
+}
 
-	/* Parse and store data needed for gadget */
-	stm32mp_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
-	if (stm32mp_otg_data.regs_otg == FDT_ADDR_T_NONE) {
-		debug("usbotg: can't get base address\n");
-		ret = -ENODATA;
-		goto phy_init_err;
-	}
+static int stusb1600_cable_connected(struct udevice *dev)
+{
+	u8 status;
 
-	stm32mp_otg_data.rx_fifo_sz = fdtdec_get_int(blob, node,
-						     "g-rx-fifo-size", 0);
-	stm32mp_otg_data.np_tx_fifo_sz = fdtdec_get_int(blob, node,
-							"g-np-tx-fifo-size", 0);
-	stm32mp_otg_data.tx_fifo_sz = fdtdec_get_int(blob, node,
-						     "g-tx-fifo-size", 0);
-	/* Enable voltage level detector */
-	if (!(fdtdec_parse_phandle_with_args(blob, node, "usb33d-supply",
-					     NULL, 0, 0, &args))) {
-		if (!uclass_get_device_by_of_offset(UCLASS_REGULATOR,
-						    args.node, &dev)) {
-			ret = regulator_set_enable(dev, true);
-			if (ret) {
-				debug("Failed to enable usb33d\n");
-				goto phy_init_err;
-			}
-		}
-	}
-		/* Enable vbus sensing */
-	setbits_le32(stm32mp_otg_data.regs_otg + STM32MP_GGPIO,
-		     STM32MP_GGPIO_VBUS_SENSING);
+	if (dm_i2c_read(dev, STUSB1600_CC_CONNECTION_STATUS, &status, 1))
+		return 0;
 
-	return dwc2_udc_probe(&stm32mp_otg_data);
+	return status & STUSB1600_CC_ATTACH;
+}
 
-phy_init_err:
-	generic_phy_exit(&phy);
+#include <usb/dwc2_udc.h>
+int g_dnl_board_usb_cable_connected(void)
+{
+	struct udevice *stusb1600;
+	struct udevice *dwc2_udc_otg;
+	int ret;
 
-phy_power_err:
-	generic_phy_power_off(&phy);
+	if (!stusb1600_init(&stusb1600))
+		return stusb1600_cable_connected(stusb1600);
 
-clk_err:
-	clk_disable(&clk);
+	ret = uclass_get_device_by_driver(UCLASS_USB_GADGET_GENERIC,
+					  DM_GET_DRIVER(dwc2_udc_otg),
+					  &dwc2_udc_otg);
+	if (!ret)
+		debug("dwc2_udc_otg init failed\n");
 
-	return ret;
+	return dwc2_udc_B_session_valid(dwc2_udc_otg);
 }
+#endif /* CONFIG_USB_GADGET */
 
 static int get_led(struct udevice **dev, char *led_string)
 {
@@ -438,16 +361,6 @@ static int board_check_usb_power(void)
 	return 0;
 }
 
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	/* Reset usbotg */
-	reset_assert(&usbotg_reset);
-	udelay(2);
-	reset_deassert(&usbotg_reset);
-
-	return 0;
-}
-
 static void sysconf_init(void)
 {
 #ifndef CONFIG_STM32MP1_TRUSTED
diff --git a/cmd/dfu.c b/cmd/dfu.c
index c9ba062197..91a750a4fc 100644
--- a/cmd/dfu.c
+++ b/cmd/dfu.c
@@ -27,8 +27,10 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifdef CONFIG_DFU_OVER_USB
 	char *usb_controller = argv[1];
 #endif
+#if defined(CONFIG_DFU_OVER_USB) || defined(CONFIG_DFU_OVER_TFTP)
 	char *interface = argv[2];
 	char *devstring = argv[3];
+#endif
 
 	int ret = 0;
 #ifdef CONFIG_DFU_OVER_TFTP
@@ -63,6 +65,7 @@ done:
 
 U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu,
 	"Device Firmware Upgrade",
+	""
 #ifdef CONFIG_DFU_OVER_USB
 	"<USB_controller> <interface> <dev> [list]\n"
 	"  - device firmware upgrade via <USB_controller>\n"
diff --git a/cmd/usb_mass_storage.c b/cmd/usb_mass_storage.c
index 753ae4f42a..570cf3aa50 100644
--- a/cmd/usb_mass_storage.c
+++ b/cmd/usb_mass_storage.c
@@ -14,6 +14,7 @@
 #include <part.h>
 #include <usb.h>
 #include <usb_mass_storage.h>
+#include <watchdog.h>
 
 static int ums_read_sector(struct ums *ums_dev,
 			   ulong start, lbaint_t blkcnt, void *buf)
@@ -226,6 +227,8 @@ static int do_usb_mass_storage(cmd_tbl_t *cmdtp, int flag,
 			rc = CMD_RET_SUCCESS;
 			goto cleanup_register;
 		}
+
+		WATCHDOG_RESET();
 	}
 
 cleanup_register:
diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig
index 6afda72453..ffe013fa2d 100644
--- a/configs/am335x_boneblack_vboot_defconfig
+++ b/configs/am335x_boneblack_vboot_defconfig
@@ -56,7 +56,6 @@ CONFIG_SPL_DM_USB_GADGET=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
-CONFIG_USB_MUSB_DSPS=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index a396a39310..105ff01d14 100644
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -64,7 +64,6 @@ CONFIG_SPL_DM_USB_GADGET=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
-CONFIG_USB_MUSB_DSPS=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451
diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig
index 1746df90f4..a37966bc6d 100644
--- a/configs/am335x_hs_evm_defconfig
+++ b/configs/am335x_hs_evm_defconfig
@@ -60,7 +60,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
-CONFIG_USB_MUSB_DSPS=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451
diff --git a/configs/am335x_hs_evm_uart_defconfig b/configs/am335x_hs_evm_uart_defconfig
index d2d6f2fb6e..ff131eb601 100644
--- a/configs/am335x_hs_evm_uart_defconfig
+++ b/configs/am335x_hs_evm_uart_defconfig
@@ -62,7 +62,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
-CONFIG_USB_MUSB_DSPS=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0451
diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig
index 6b0d0242f2..63cb240ea8 100644
--- a/configs/brppt1_mmc_defconfig
+++ b/configs/brppt1_mmc_defconfig
@@ -84,7 +84,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
-CONFIG_USB_MUSB_DSPS=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_FAT_WRITE=y
diff --git a/configs/brppt1_nand_defconfig b/configs/brppt1_nand_defconfig
index 4578f74a62..57cd54bac2 100644
--- a/configs/brppt1_nand_defconfig
+++ b/configs/brppt1_nand_defconfig
@@ -88,7 +88,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
-CONFIG_USB_MUSB_DSPS=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_FAT_WRITE=y
diff --git a/configs/brppt1_spi_defconfig b/configs/brppt1_spi_defconfig
index 739b0786f3..31ba5158b5 100644
--- a/configs/brppt1_spi_defconfig
+++ b/configs/brppt1_spi_defconfig
@@ -99,7 +99,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_TI=y
-CONFIG_USB_MUSB_DSPS=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_FAT_WRITE=y
diff --git a/configs/chiliboard_defconfig b/configs/chiliboard_defconfig
index a6c36eda50..944dd0db3c 100644
--- a/configs/chiliboard_defconfig
+++ b/configs/chiliboard_defconfig
@@ -50,6 +50,5 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_MUSB_TI=y
-CONFIG_USB_MUSB_DSPS=y
 CONFIG_FAT_WRITE=y
 CONFIG_LZO=y
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index 6781adb81e..fd164fa596 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -69,9 +69,9 @@ CONFIG_SERIAL_RX_BUFFER=y
 CONFIG_STM32_SERIAL=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_DWC2=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0483
diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
index a050cee691..f82b770bc8 100644
--- a/configs/stm32mp15_trusted_defconfig
+++ b/configs/stm32mp15_trusted_defconfig
@@ -60,9 +60,9 @@ CONFIG_SERIAL_RX_BUFFER=y
 CONFIG_STM32_SERIAL=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_DWC2=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0483
diff --git a/doc/device-tree-bindings/phy/phy-stm32-usbphyc.txt b/doc/device-tree-bindings/phy/phy-stm32-usbphyc.txt
index 725ae71ae6..da98407403 100644
--- a/doc/device-tree-bindings/phy/phy-stm32-usbphyc.txt
+++ b/doc/device-tree-bindings/phy/phy-stm32-usbphyc.txt
@@ -23,6 +23,8 @@ Required properties:
 - compatible: must be "st,stm32mp1-usbphyc"
 - reg: address and length of the usb phy control register set
 - clocks: phandle + clock specifier for the PLL phy clock
+- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
+- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
 - #address-cells: number of address cells for phys sub-nodes, must be <1>
 - #size-cells: number of size cells for phys sub-nodes, must be <0>
 
@@ -40,8 +42,6 @@ Required properties:
 - reg: phy port index
 - phy-supply: phandle to the regulator providing 3V3 power to the PHY,
 	      see phy-bindings.txt in the same directory.
-- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
-- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
 - #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY
   port#1 and must be <1> for PHY port#2, to select USB controller
 
diff --git a/doc/device-tree-bindings/usb/dwc2.txt b/doc/device-tree-bindings/usb/dwc2.txt
new file mode 100644
index 0000000000..61493f7cb0
--- /dev/null
+++ b/doc/device-tree-bindings/usb/dwc2.txt
@@ -0,0 +1,58 @@
+Platform DesignWare HS OTG USB 2.0 controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : One of:
+  - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
+  - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
+  - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
+  - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc;
+  - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
+  - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
+  - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
+  - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
+  - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
+  - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
+  - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
+  - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
+  - snps,dwc2: A generic DWC2 USB controller with default parameters.
+  - "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs
+  configured in FS mode;
+  - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
+  configured in HS mode;
+  - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs
+    configured in HS mode;
+- reg : Should contain 1 register range (address and length)
+- interrupts : Should contain 1 interrupt
+- clocks: clock provider specifier
+- clock-names: shall be "otg"
+Refer to clk/clock-bindings.txt for generic clock consumer properties
+
+Optional properties:
+- phys: phy provider specifier
+- phy-names: shall be "usb2-phy"
+Refer to phy/phy-bindings.txt for generic phy consumer properties
+- dr_mode: shall be one of "host", "peripheral" and "otg"
+  Refer to usb/generic.txt
+- g-rx-fifo-size: size of rx fifo size in gadget mode.
+- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+- usb33d-supply: external VBUS and ID sensing comparators supply, in order to
+  perform OTG operation, used on STM32MP1 SoCs.
+- u-boot,force-b-session-valid: force B-peripheral session instead of relying on
+  VBUS sensing (only valid when dr_mode = "peripheral" and for u-boot).
+
+Deprecated properties:
+- g-use-dma: gadget DMA mode is automatically detected
+
+Example:
+
+        usb@101c0000 {
+                compatible = "ralink,rt3050-usb, snps,dwc2";
+                reg = <0x101c0000 40000>;
+                interrupts = <18>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+        };
diff --git a/drivers/fastboot/fb_getvar.c b/drivers/fastboot/fb_getvar.c
index 4d264c985d..4268628f5e 100644
--- a/drivers/fastboot/fb_getvar.c
+++ b/drivers/fastboot/fb_getvar.c
@@ -17,6 +17,7 @@ static void getvar_downloadsize(char *var_parameter, char *response);
 static void getvar_serialno(char *var_parameter, char *response);
 static void getvar_version_baseband(char *var_parameter, char *response);
 static void getvar_product(char *var_parameter, char *response);
+static void getvar_platform(char *var_parameter, char *response);
 static void getvar_current_slot(char *var_parameter, char *response);
 static void getvar_slot_suffixes(char *var_parameter, char *response);
 static void getvar_has_slot(char *var_parameter, char *response);
@@ -56,13 +57,16 @@ static const struct {
 		.variable = "product",
 		.dispatch = getvar_product
 	}, {
+		.variable = "platform",
+		.dispatch = getvar_platform
+	}, {
 		.variable = "current-slot",
 		.dispatch = getvar_current_slot
 	}, {
 		.variable = "slot-suffixes",
 		.dispatch = getvar_slot_suffixes
 	}, {
-		.variable = "has_slot",
+		.variable = "has-slot",
 		.dispatch = getvar_has_slot
 #if CONFIG_IS_ENABLED(FASTBOOT_FLASH_MMC)
 	}, {
@@ -117,6 +121,16 @@ static void getvar_product(char *var_parameter, char *response)
 		fastboot_fail("Board not set", response);
 }
 
+static void getvar_platform(char *var_parameter, char *response)
+{
+	const char *p = env_get("platform");
+
+	if (p)
+		fastboot_okay(p, response);
+	else
+		fastboot_fail("platform not set", response);
+}
+
 static void getvar_current_slot(char *var_parameter, char *response)
 {
 	/* A/B not implemented, for now always return _a */
diff --git a/drivers/fastboot/fb_mmc.c b/drivers/fastboot/fb_mmc.c
index 4c1c7fd2cd..90ca81da9b 100644
--- a/drivers/fastboot/fb_mmc.c
+++ b/drivers/fastboot/fb_mmc.c
@@ -31,13 +31,13 @@ static int part_get_info_by_name_or_alias(struct blk_desc *dev_desc,
 
 	ret = part_get_info_by_name(dev_desc, name, info);
 	if (ret < 0) {
-		/* strlen("fastboot_partition_alias_") + 32(part_name) + 1 */
-		char env_alias_name[25 + 32 + 1];
+		/* strlen("fastboot_partition_alias_") + PART_NAME_LEN + 1 */
+		char env_alias_name[25 + PART_NAME_LEN + 1];
 		char *aliased_part_name;
 
 		/* check for alias */
 		strcpy(env_alias_name, "fastboot_partition_alias_");
-		strncat(env_alias_name, name, 32);
+		strncat(env_alias_name, name, PART_NAME_LEN);
 		aliased_part_name = env_get(env_alias_name);
 		if (aliased_part_name != NULL)
 			ret = part_get_info_by_name(dev_desc,
@@ -308,8 +308,8 @@ int fastboot_mmc_get_part_info(char *part_name, struct blk_desc **dev_desc,
 		fastboot_fail("block device not found", response);
 		return -ENOENT;
 	}
-	if (!part_name) {
-		fastboot_fail("partition not found", response);
+	if (!part_name || !strcmp(part_name, "")) {
+		fastboot_fail("partition not given", response);
 		return -ENOENT;
 	}
 
diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c
index 8e98b4b627..6f1119036d 100644
--- a/drivers/phy/phy-stm32-usbphyc.c
+++ b/drivers/phy/phy-stm32-usbphyc.c
@@ -37,7 +37,8 @@
 
 #define MAX_PHYS		2
 
-#define PLL_LOCK_TIME_US	100
+/* max 100 us for PLL lock and 100 us for PHY init */
+#define PLL_INIT_TIME_US	200
 #define PLL_PWR_DOWN_TIME_US	5
 #define PLL_FVCO		2880	 /* in MHz */
 #define PLL_INFF_MIN_RATE	19200000 /* in Hz */
@@ -51,17 +52,17 @@ struct pll_params {
 struct stm32_usbphyc {
 	fdt_addr_t base;
 	struct clk clk;
+	struct udevice *vdda1v1;
+	struct udevice *vdda1v8;
 	struct stm32_usbphyc_phy {
 		struct udevice *vdd;
-		struct udevice *vdda1v1;
-		struct udevice *vdda1v8;
-		int index;
 		bool init;
 		bool powered;
 	} phys[MAX_PHYS];
 };
 
-void stm32_usbphyc_get_pll_params(u32 clk_rate, struct pll_params *pll_params)
+static void stm32_usbphyc_get_pll_params(u32 clk_rate,
+					 struct pll_params *pll_params)
 {
 	unsigned long long fvco, ndiv, frac;
 
@@ -154,6 +155,18 @@ static int stm32_usbphyc_phy_init(struct phy *phy)
 	if (pllen && stm32_usbphyc_is_init(usbphyc))
 		goto initialized;
 
+	if (usbphyc->vdda1v1) {
+		ret = regulator_set_enable(usbphyc->vdda1v1, true);
+		if (ret)
+			return ret;
+	}
+
+	if (usbphyc->vdda1v8) {
+		ret = regulator_set_enable(usbphyc->vdda1v8, true);
+		if (ret)
+			return ret;
+	}
+
 	if (pllen) {
 		clrbits_le32(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);
 		udelay(PLL_PWR_DOWN_TIME_US);
@@ -165,11 +178,8 @@ static int stm32_usbphyc_phy_init(struct phy *phy)
 
 	setbits_le32(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);
 
-	/*
-	 * We must wait PLL_LOCK_TIME_US before checking that PLLEN
-	 * bit is still set
-	 */
-	udelay(PLL_LOCK_TIME_US);
+	/* We must wait PLL_INIT_TIME_US before using PHY */
+	udelay(PLL_INIT_TIME_US);
 
 	if (!(readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN))
 		return -EIO;
@@ -184,6 +194,7 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)
 {
 	struct stm32_usbphyc *usbphyc = dev_get_priv(phy->dev);
 	struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;
+	int ret;
 
 	pr_debug("%s phy ID = %lu\n", __func__, phy->id);
 	usbphyc_phy->init = false;
@@ -203,6 +214,18 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)
 	if (readl(usbphyc->base + STM32_USBPHYC_PLL) & PLLEN)
 		return -EIO;
 
+	if (usbphyc->vdda1v1) {
+		ret = regulator_set_enable(usbphyc->vdda1v1, false);
+		if (ret)
+			return ret;
+	}
+
+	if (usbphyc->vdda1v8) {
+		ret = regulator_set_enable(usbphyc->vdda1v8, false);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -213,17 +236,6 @@ static int stm32_usbphyc_phy_power_on(struct phy *phy)
 	int ret;
 
 	pr_debug("%s phy ID = %lu\n", __func__, phy->id);
-	if (usbphyc_phy->vdda1v1) {
-		ret = regulator_set_enable(usbphyc_phy->vdda1v1, true);
-		if (ret)
-			return ret;
-	}
-
-	if (usbphyc_phy->vdda1v8) {
-		ret = regulator_set_enable(usbphyc_phy->vdda1v8, true);
-		if (ret)
-			return ret;
-	}
 	if (usbphyc_phy->vdd) {
 		ret = regulator_set_enable(usbphyc_phy->vdd, true);
 		if (ret)
@@ -247,18 +259,6 @@ static int stm32_usbphyc_phy_power_off(struct phy *phy)
 	if (stm32_usbphyc_is_powered(usbphyc))
 		return 0;
 
-	if (usbphyc_phy->vdda1v1) {
-		ret = regulator_set_enable(usbphyc_phy->vdda1v1, false);
-		if (ret)
-			return ret;
-	}
-
-	if (usbphyc_phy->vdda1v8) {
-		ret = regulator_set_enable(usbphyc_phy->vdda1v8, false);
-		if (ret)
-			return ret;
-	}
-
 	if (usbphyc_phy->vdd) {
 		ret = regulator_set_enable(usbphyc_phy->vdd, false);
 		if (ret)
@@ -298,19 +298,20 @@ static int stm32_usbphyc_get_regulator(struct udevice *dev, ofnode node,
 static int stm32_usbphyc_of_xlate(struct phy *phy,
 				  struct ofnode_phandle_args *args)
 {
-	if (args->args_count > 1) {
-		pr_debug("%s: invalid args_count: %d\n", __func__,
-			 args->args_count);
-		return -EINVAL;
-	}
+	if (args->args_count < 1)
+		return -ENODEV;
 
 	if (args->args[0] >= MAX_PHYS)
 		return -ENODEV;
 
-	if (args->args_count)
-		phy->id = args->args[0];
-	else
-		phy->id = 0;
+	phy->id = args->args[0];
+
+	if ((phy->id == 0 && args->args_count != 1) ||
+	    (phy->id == 1 && args->args_count != 2)) {
+		dev_err(dev, "invalid number of cells for phy port%ld\n",
+			phy->id);
+		return -EINVAL;
+	}
 
 	return 0;
 }
@@ -351,6 +352,21 @@ static int stm32_usbphyc_probe(struct udevice *dev)
 		reset_deassert(&reset);
 	}
 
+	/* get usbphyc regulator */
+	ret = device_get_supply_regulator(dev, "vdda1v1-supply",
+					  &usbphyc->vdda1v1);
+	if (ret) {
+		dev_err(dev, "Can't get vdda1v1-supply regulator\n");
+		return ret;
+	}
+
+	ret = device_get_supply_regulator(dev, "vdda1v8-supply",
+					  &usbphyc->vdda1v8);
+	if (ret) {
+		dev_err(dev, "Can't get vdda1v8-supply regulator\n");
+		return ret;
+	}
+
 	/*
 	 * parse all PHY subnodes in order to populate regulator associated
 	 * to each PHY port
@@ -359,7 +375,6 @@ static int stm32_usbphyc_probe(struct udevice *dev)
 	for (i = 0; i < MAX_PHYS; i++) {
 		struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + i;
 
-		usbphyc_phy->index = i;
 		usbphyc_phy->init = false;
 		usbphyc_phy->powered = false;
 		ret = stm32_usbphyc_get_regulator(dev, node, "phy-supply",
@@ -367,16 +382,6 @@ static int stm32_usbphyc_probe(struct udevice *dev)
 		if (ret)
 			return ret;
 
-		ret = stm32_usbphyc_get_regulator(dev, node, "vdda1v1-supply",
-						  &usbphyc_phy->vdda1v1);
-		if (ret)
-			return ret;
-
-		ret = stm32_usbphyc_get_regulator(dev, node, "vdda1v8-supply",
-						  &usbphyc_phy->vdda1v8);
-		if (ret)
-			return ret;
-
 		node = dev_read_next_subnode(node);
 	}
 
diff --git a/drivers/usb/gadget/dwc2_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c
index 3c7ad033e3..494ab533cc 100644
--- a/drivers/usb/gadget/dwc2_udc_otg.c
+++ b/drivers/usb/gadget/dwc2_udc_otg.c
@@ -18,11 +18,17 @@
  */
 #undef DEBUG
 #include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <malloc.h>
+#include <reset.h>
+
 #include <linux/errno.h>
 #include <linux/list.h>
-#include <malloc.h>
 
 #include <linux/usb/ch9.h>
+#include <linux/usb/otg.h>
 #include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
@@ -31,6 +37,8 @@
 
 #include <asm/mach-types.h>
 
+#include <power/regulator.h>
+
 #include "dwc2_udc_otg_regs.h"
 #include "dwc2_udc_otg_priv.h"
 
@@ -140,7 +148,6 @@ static struct usb_ep_ops dwc2_ep_ops = {
 
 /***********************************************************/
 
-void __iomem		*regs_otg;
 struct dwc2_usbotg_reg *reg;
 
 bool dfu_usb_get_reset(void)
@@ -223,6 +230,7 @@ static int udc_enable(struct dwc2_udc *dev)
 	return 0;
 }
 
+#if !CONFIG_IS_ENABLED(DM_USB_GADGET)
 /*
   Register entry point for the peripheral controller driver.
 */
@@ -297,6 +305,54 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	udc_disable(dev);
 	return 0;
 }
+#else /* !CONFIG_IS_ENABLED(DM_USB_GADGET) */
+
+static int dwc2_gadget_start(struct usb_gadget *g,
+			     struct usb_gadget_driver *driver)
+{
+	struct dwc2_udc *dev = the_controller;
+
+	debug_cond(DEBUG_SETUP != 0, "%s: %s\n", __func__, "no name");
+
+	if (!driver ||
+	    (driver->speed != USB_SPEED_FULL &&
+	     driver->speed != USB_SPEED_HIGH) ||
+	    !driver->bind || !driver->disconnect || !driver->setup)
+		return -EINVAL;
+
+	if (!dev)
+		return -ENODEV;
+
+	if (dev->driver)
+		return -EBUSY;
+
+	/* first hook up the driver ... */
+	dev->driver = driver;
+
+	debug_cond(DEBUG_SETUP != 0,
+		   "Registered gadget driver %s\n", dev->gadget.name);
+	return udc_enable(dev);
+}
+
+static int dwc2_gadget_stop(struct usb_gadget *g)
+{
+	struct dwc2_udc *dev = the_controller;
+
+	if (!dev)
+		return -ENODEV;
+
+	if (!dev->driver)
+		return -EINVAL;
+
+	dev->driver = 0;
+	stop_activity(dev, dev->driver);
+
+	udc_disable(dev);
+
+	return 0;
+}
+
+#endif /* !CONFIG_IS_ENABLED(DM_USB_GADGET) */
 
 /*
  *	done - retire a request; caller blocked irqs
@@ -400,6 +456,8 @@ static void reconfig_usbd(struct dwc2_udc *dev)
 	unsigned int uTemp = writel(CORE_SOFT_RESET, &reg->grstctl);
 	uint32_t dflt_gusbcfg;
 	uint32_t rx_fifo_sz, tx_fifo_sz, np_tx_fifo_sz;
+	u32 max_hw_ep;
+	int pdata_hw_ep;
 
 	debug("Reseting OTG controller\n");
 
@@ -482,10 +540,23 @@ static void reconfig_usbd(struct dwc2_udc *dev)
 	writel((np_tx_fifo_sz << 16) | rx_fifo_sz,
 	       &reg->gnptxfsiz);
 
-	for (i = 1; i < DWC2_MAX_HW_ENDPOINTS; i++)
-		writel((rx_fifo_sz + np_tx_fifo_sz + tx_fifo_sz*(i-1)) |
-			tx_fifo_sz << 16, &reg->dieptxf[i-1]);
+	/* retrieve the number of IN Endpoints (excluding ep0) */
+	max_hw_ep = (readl(&reg->ghwcfg4) & GHWCFG4_NUM_IN_EPS_MASK) >>
+		    GHWCFG4_NUM_IN_EPS_SHIFT;
+	pdata_hw_ep = dev->pdata->tx_fifo_sz_nb;
+
+	/* tx_fifo_sz_nb should equal to number of IN Endpoint */
+	if (pdata_hw_ep && max_hw_ep != pdata_hw_ep)
+		pr_warn("Got %d hw endpoint but %d tx-fifo-size in array !!\n",
+			max_hw_ep, pdata_hw_ep);
+
+	for (i = 0; i < max_hw_ep; i++) {
+		if (pdata_hw_ep)
+			tx_fifo_sz = dev->pdata->tx_fifo_sz_array[i];
 
+		writel((rx_fifo_sz + np_tx_fifo_sz + (tx_fifo_sz * i)) |
+			tx_fifo_sz << 16, &reg->dieptxf[i]);
+	}
 	/* Flush the RX FIFO */
 	writel(RX_FIFO_FLUSH, &reg->grstctl);
 	while (readl(&reg->grstctl) & RX_FIFO_FLUSH)
@@ -731,6 +802,10 @@ static void dwc2_fifo_flush(struct usb_ep *_ep)
 
 static const struct usb_gadget_ops dwc2_udc_ops = {
 	/* current versions must always be self-powered */
+#if CONFIG_IS_ENABLED(DM_USB_GADGET)
+	.udc_start		= dwc2_gadget_start,
+	.udc_stop		= dwc2_gadget_stop,
+#endif
 };
 
 static struct dwc2_udc memory = {
@@ -818,8 +893,6 @@ int dwc2_udc_probe(struct dwc2_plat_otg_data *pdata)
 
 	reg = (struct dwc2_usbotg_reg *)pdata->regs_otg;
 
-	/* regs_otg = (void *)pdata->regs_otg; */
-
 	dev->gadget.is_dualspeed = 1;	/* Hack only*/
 	dev->gadget.is_otg = 0;
 	dev->gadget.is_a_peripheral = 0;
@@ -844,12 +917,311 @@ int dwc2_udc_probe(struct dwc2_plat_otg_data *pdata)
 	return retval;
 }
 
-int usb_gadget_handle_interrupts(int index)
+int dwc2_udc_handle_interrupt(void)
 {
 	u32 intr_status = readl(&reg->gintsts);
 	u32 gintmsk = readl(&reg->gintmsk);
 
 	if (intr_status & gintmsk)
 		return dwc2_udc_irq(1, (void *)the_controller);
+
+	return 0;
+}
+
+#if !CONFIG_IS_ENABLED(DM_USB_GADGET)
+
+int usb_gadget_handle_interrupts(int index)
+{
+	return dwc2_udc_handle_interrupt();
+}
+
+#else /* CONFIG_IS_ENABLED(DM_USB_GADGET) */
+
+struct dwc2_priv_data {
+	struct clk_bulk		clks;
+	struct reset_ctl_bulk	resets;
+	struct phy *phys;
+	int num_phys;
+	struct udevice *usb33d_supply;
+};
+
+int dm_usb_gadget_handle_interrupts(struct udevice *dev)
+{
+	return dwc2_udc_handle_interrupt();
+}
+
+int dwc2_phy_setup(struct udevice *dev, struct phy **array, int *num_phys)
+{
+	int i, ret, count;
+	struct phy *usb_phys;
+
+	/* Return if no phy declared */
+	if (!dev_read_prop(dev, "phys", NULL))
+		return 0;
+
+	count = dev_count_phandle_with_args(dev, "phys", "#phy-cells");
+	if (count <= 0)
+		return count;
+
+	usb_phys = devm_kcalloc(dev, count, sizeof(struct phy),
+				GFP_KERNEL);
+	if (!usb_phys)
+		return -ENOMEM;
+
+	for (i = 0; i < count; i++) {
+		ret = generic_phy_get_by_index(dev, i, &usb_phys[i]);
+		if (ret && ret != -ENOENT) {
+			dev_err(dev, "Failed to get USB PHY%d for %s\n",
+				i, dev->name);
+			return ret;
+		}
+	}
+
+	for (i = 0; i < count; i++) {
+		ret = generic_phy_init(&usb_phys[i]);
+		if (ret) {
+			dev_err(dev, "Can't init USB PHY%d for %s\n",
+				i, dev->name);
+			goto phys_init_err;
+		}
+	}
+
+	for (i = 0; i < count; i++) {
+		ret = generic_phy_power_on(&usb_phys[i]);
+		if (ret) {
+			dev_err(dev, "Can't power USB PHY%d for %s\n",
+				i, dev->name);
+			goto phys_poweron_err;
+		}
+	}
+
+	*array = usb_phys;
+	*num_phys =  count;
+
 	return 0;
+
+phys_poweron_err:
+	for (i = count - 1; i >= 0; i--)
+		generic_phy_power_off(&usb_phys[i]);
+
+	for (i = 0; i < count; i++)
+		generic_phy_exit(&usb_phys[i]);
+
+	return ret;
+
+phys_init_err:
+	for (; i >= 0; i--)
+		generic_phy_exit(&usb_phys[i]);
+
+	return ret;
+}
+
+void dwc2_phy_shutdown(struct udevice *dev, struct phy *usb_phys, int num_phys)
+{
+	int i, ret;
+
+	for (i = 0; i < num_phys; i++) {
+		if (!generic_phy_valid(&usb_phys[i]))
+			continue;
+
+		ret = generic_phy_power_off(&usb_phys[i]);
+		ret |= generic_phy_exit(&usb_phys[i]);
+		if (ret) {
+			dev_err(dev, "Can't shutdown USB PHY%d for %s\n",
+				i, dev->name);
+		}
+	}
+}
+
+static int dwc2_udc_otg_ofdata_to_platdata(struct udevice *dev)
+{
+	struct dwc2_plat_otg_data *platdata = dev_get_platdata(dev);
+	int node = dev_of_offset(dev);
+	ulong drvdata;
+	void (*set_params)(struct dwc2_plat_otg_data *data);
+
+	if (usb_get_dr_mode(node) != USB_DR_MODE_PERIPHERAL) {
+		dev_dbg(dev, "Invalid mode\n");
+		return -ENODEV;
+	}
+
+	platdata->regs_otg = dev_read_addr(dev);
+
+	platdata->rx_fifo_sz = dev_read_u32_default(dev, "g-rx-fifo-size", 0);
+	platdata->np_tx_fifo_sz = dev_read_u32_default(dev,
+						       "g-np-tx-fifo-size", 0);
+	platdata->tx_fifo_sz = dev_read_u32_default(dev, "g-tx-fifo-size", 0);
+
+	platdata->force_b_session_valid =
+		dev_read_bool(dev, "u-boot,force-b-session-valid");
+
+	/* force platdata according compatible */
+	drvdata = dev_get_driver_data(dev);
+	if (drvdata) {
+		set_params = (void *)drvdata;
+		set_params(platdata);
+	}
+
+	return 0;
+}
+
+static void dwc2_set_stm32mp1_hsotg_params(struct dwc2_plat_otg_data *p)
+{
+	p->activate_stm_id_vb_detection = true;
+	p->usb_gusbcfg =
+		0 << 15		/* PHY Low Power Clock sel*/
+		| 0x9 << 10	/* USB Turnaround time (0x9 for HS phy) */
+		| 0 << 9	/* [0:HNP disable,1:HNP enable]*/
+		| 0 << 8	/* [0:SRP disable 1:SRP enable]*/
+		| 0 << 6	/* 0: high speed utmi+, 1: full speed serial*/
+		| 0x7 << 0;	/* FS timeout calibration**/
+
+	if (p->force_b_session_valid)
+		p->usb_gusbcfg |= 1 << 30; /* FDMOD: Force device mode */
+}
+
+static int dwc2_udc_otg_reset_init(struct udevice *dev,
+				   struct reset_ctl_bulk *resets)
+{
+	int ret;
+
+	ret = reset_get_bulk(dev, resets);
+	if (ret == -ENOTSUPP)
+		return 0;
+
+	if (ret)
+		return ret;
+
+	ret = reset_assert_bulk(resets);
+
+	if (!ret) {
+		udelay(2);
+		ret = reset_deassert_bulk(resets);
+	}
+	if (ret) {
+		reset_release_bulk(resets);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dwc2_udc_otg_clk_init(struct udevice *dev,
+				 struct clk_bulk *clks)
+{
+	int ret;
+
+	ret = clk_get_bulk(dev, clks);
+	if (ret == -ENOSYS)
+		return 0;
+
+	if (ret)
+		return ret;
+
+	ret = clk_enable_bulk(clks);
+	if (ret) {
+		clk_release_bulk(clks);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dwc2_udc_otg_probe(struct udevice *dev)
+{
+	struct dwc2_plat_otg_data *platdata = dev_get_platdata(dev);
+	struct dwc2_priv_data *priv = dev_get_priv(dev);
+	struct dwc2_usbotg_reg *usbotg_reg =
+		(struct dwc2_usbotg_reg *)platdata->regs_otg;
+	int ret;
+
+	ret = dwc2_udc_otg_clk_init(dev, &priv->clks);
+	if (ret)
+		return ret;
+
+	ret = dwc2_udc_otg_reset_init(dev, &priv->resets);
+	if (ret)
+		return ret;
+
+	ret = dwc2_phy_setup(dev, &priv->phys, &priv->num_phys);
+	if (ret)
+		return ret;
+
+	if (CONFIG_IS_ENABLED(DM_REGULATOR) &&
+	    platdata->activate_stm_id_vb_detection &&
+	    !platdata->force_b_session_valid) {
+		ret = device_get_supply_regulator(dev, "usb33d-supply",
+						  &priv->usb33d_supply);
+		if (ret) {
+			dev_err(dev, "can't get voltage level detector supply\n");
+			return ret;
+		}
+		ret = regulator_set_enable(priv->usb33d_supply, true);
+		if (ret) {
+			dev_err(dev, "can't enable voltage level detector supply\n");
+			return ret;
+		}
+		/* Enable vbus sensing */
+		setbits_le32(&usbotg_reg->ggpio,
+			     GGPIO_STM32_OTG_GCCFG_VBDEN |
+			     GGPIO_STM32_OTG_GCCFG_IDEN);
+	}
+
+	if (platdata->force_b_session_valid)
+		/* Override B session bits : value and enable */
+		setbits_le32(&usbotg_reg->gotgctl,
+			     A_VALOEN | A_VALOVAL | B_VALOEN | B_VALOVAL);
+
+	ret = dwc2_udc_probe(platdata);
+	if (ret)
+		return ret;
+
+	the_controller->driver = 0;
+
+	ret = usb_add_gadget_udc((struct device *)dev, &the_controller->gadget);
+
+	return ret;
+}
+
+static int dwc2_udc_otg_remove(struct udevice *dev)
+{
+	struct dwc2_priv_data *priv = dev_get_priv(dev);
+
+	usb_del_gadget_udc(&the_controller->gadget);
+
+	reset_release_bulk(&priv->resets);
+
+	clk_release_bulk(&priv->clks);
+
+	dwc2_phy_shutdown(dev, priv->phys, priv->num_phys);
+
+	return dm_scan_fdt_dev(dev);
+}
+
+static const struct udevice_id dwc2_udc_otg_ids[] = {
+	{ .compatible = "snps,dwc2" },
+	{ .compatible = "st,stm32mp1-hsotg",
+	  .data = (ulong)dwc2_set_stm32mp1_hsotg_params },
+	{},
+};
+
+U_BOOT_DRIVER(dwc2_udc_otg) = {
+	.name	= "dwc2-udc-otg",
+	.id	= UCLASS_USB_GADGET_GENERIC,
+	.of_match = dwc2_udc_otg_ids,
+	.ofdata_to_platdata = dwc2_udc_otg_ofdata_to_platdata,
+	.probe = dwc2_udc_otg_probe,
+	.remove = dwc2_udc_otg_remove,
+	.platdata_auto_alloc_size = sizeof(struct dwc2_plat_otg_data),
+	.priv_auto_alloc_size = sizeof(struct dwc2_priv_data),
+};
+
+int dwc2_udc_B_session_valid(struct udevice *dev)
+{
+	struct dwc2_plat_otg_data *platdata = dev_get_platdata(dev);
+	struct dwc2_usbotg_reg *usbotg_reg =
+		(struct dwc2_usbotg_reg *)platdata->regs_otg;
+
+	return readl(&usbotg_reg->gotgctl) & B_SESSION_VALID;
 }
+#endif /* CONFIG_IS_ENABLED(DM_USB_GADGET) */
diff --git a/drivers/usb/gadget/dwc2_udc_otg_priv.h b/drivers/usb/gadget/dwc2_udc_otg_priv.h
index aaa90187fb..e72b22ac61 100644
--- a/drivers/usb/gadget/dwc2_udc_otg_priv.h
+++ b/drivers/usb/gadget/dwc2_udc_otg_priv.h
@@ -23,7 +23,6 @@
 #define EP_FIFO_SIZE2		1024
 /* ep0-control, ep1in-bulk, ep2out-bulk, ep3in-int */
 #define DWC2_MAX_ENDPOINTS	4
-#define DWC2_MAX_HW_ENDPOINTS	16
 
 #define WAIT_FOR_SETUP          0
 #define DATA_STATE_XMIT         1
diff --git a/drivers/usb/gadget/dwc2_udc_otg_regs.h b/drivers/usb/gadget/dwc2_udc_otg_regs.h
index a1829b3fd1..434db5ba39 100644
--- a/drivers/usb/gadget/dwc2_udc_otg_regs.h
+++ b/drivers/usb/gadget/dwc2_udc_otg_regs.h
@@ -60,22 +60,26 @@ struct dwc2_usbotg_reg {
 	u32 grxstsp; /* Receive Status Debug Pop/Status Pop */
 	u32 grxfsiz; /* Receive FIFO Size */
 	u32 gnptxfsiz; /* Non-Periodic Transmit FIFO Size */
-	u8  res1[216];
+	u8  res0[12];
+	u32 ggpio;     /* 0x038 */
+	u8  res1[20];
+	u32 ghwcfg4; /* User HW Config4 */
+	u8  res2[176];
 	u32 dieptxf[15]; /* Device Periodic Transmit FIFO size register */
-	u8  res2[1728];
+	u8  res3[1728];
 	/* Device Configuration */
 	u32 dcfg; /* Device Configuration Register */
 	u32 dctl; /* Device Control */
 	u32 dsts; /* Device Status */
-	u8  res3[4];
+	u8  res4[4];
 	u32 diepmsk; /* Device IN Endpoint Common Interrupt Mask */
 	u32 doepmsk; /* Device OUT Endpoint Common Interrupt Mask */
 	u32 daint; /* Device All Endpoints Interrupt */
 	u32 daintmsk; /* Device All Endpoints Interrupt Mask */
-	u8  res4[224];
+	u8  res5[224];
 	struct dwc2_dev_in_endp in_endp[16];
 	struct dwc2_dev_out_endp out_endp[16];
-	u8  res5[768];
+	u8  res6[768];
 	struct ep_fifo ep[16];
 };
 
@@ -83,8 +87,15 @@ struct dwc2_usbotg_reg {
 /*definitions related to CSR setting */
 
 /* DWC2_UDC_OTG_GOTGCTL */
-#define B_SESSION_VALID		(0x1<<19)
-#define A_SESSION_VALID		(0x1<<18)
+#define B_SESSION_VALID			BIT(19)
+#define A_SESSION_VALID			BIT(18)
+#define B_VALOVAL			BIT(7)
+#define B_VALOEN			BIT(6)
+#define A_VALOVAL			BIT(5)
+#define A_VALOEN			BIT(4)
+
+/* DWC2_UDC_OTG_GOTINT */
+#define GOTGINT_SES_END_DET		(1<<2)
 
 /* DWC2_UDC_OTG_GAHBCFG */
 #define PTXFE_HALF			(0<<8)
@@ -118,6 +129,7 @@ struct dwc2_usbotg_reg {
 #define INT_NP_TX_FIFO_EMPTY		(0x1<<5)
 #define INT_RX_FIFO_NOT_EMPTY		(0x1<<4)
 #define INT_SOF			(0x1<<3)
+#define INT_OTG			(0x1<<2)
 #define INT_DEV_MODE			(0x0<<0)
 #define INT_HOST_MODE			(0x1<<1)
 #define INT_GOUTNakEff			(0x01<<7)
@@ -246,7 +258,7 @@ struct dwc2_usbotg_reg {
 
 /* Masks definitions */
 #define GINTMSK_INIT	(INT_OUT_EP | INT_IN_EP | INT_RESUME | INT_ENUMDONE\
-			| INT_RESET | INT_SUSPEND)
+			| INT_RESET | INT_SUSPEND | INT_OTG)
 #define DOEPMSK_INIT	(CTRL_OUT_EP_SETUP_PHASE_DONE | AHB_ERROR|TRANSFER_DONE)
 #define DIEPMSK_INIT	(NON_ISO_IN_EP_TIMEOUT|AHB_ERROR|TRANSFER_DONE)
 #define GAHBCFG_INIT	(PTXFE_HALF | NPTXFE_HALF | MODE_DMA | BURST_INCR4\
@@ -269,4 +281,13 @@ struct dwc2_usbotg_reg {
 /* Device ALL Endpoints Interrupt Register (DAINT) */
 #define DAINT_IN_EP_INT(x)                        (x << 0)
 #define DAINT_OUT_EP_INT(x)                       (x << 16)
+
+/* User HW Config4 */
+#define GHWCFG4_NUM_IN_EPS_MASK		(0xf << 26)
+#define GHWCFG4_NUM_IN_EPS_SHIFT	26
+
+/* OTG general core configuration register (OTG_GCCFG:0x38) for STM32MP1 */
+#define GGPIO_STM32_OTG_GCCFG_VBDEN               BIT(21)
+#define GGPIO_STM32_OTG_GCCFG_IDEN                BIT(22)
+
 #endif
diff --git a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c
index a75af4987f..7eb632d3b1 100644
--- a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c
+++ b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c
@@ -467,7 +467,7 @@ static void process_ep_out_intr(struct dwc2_udc *dev)
 static int dwc2_udc_irq(int irq, void *_dev)
 {
 	struct dwc2_udc *dev = _dev;
-	u32 intr_status;
+	u32 intr_status, gotgint;
 	u32 usb_status, gintmsk;
 	unsigned long flags = 0;
 
@@ -521,14 +521,24 @@ static int dwc2_udc_irq(int irq, void *_dev)
 		    && dev->driver) {
 			if (dev->driver->suspend)
 				dev->driver->suspend(&dev->gadget);
+		}
+	}
+
+	if (intr_status & INT_OTG) {
+		gotgint = readl(&reg->gotgint);
+		debug_cond(DEBUG_ISR,
+			   "\tOTG interrupt: (GOTGINT):0x%x\n", gotgint);
 
-			/* HACK to let gadget detect disconnected state */
+		if (gotgint & GOTGINT_SES_END_DET) {
+			debug_cond(DEBUG_ISR, "\t\tSession End Detected\n");
+			/* Let gadget detect disconnected state */
 			if (dev->driver->disconnect) {
 				spin_unlock_irqrestore(&dev->lock, flags);
 				dev->driver->disconnect(&dev->gadget);
 				spin_lock_irqsave(&dev->lock, flags);
 			}
 		}
+		writel(gotgint, &reg->gotgint);
 	}
 
 	if (intr_status & INT_RESUME) {
diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig
index f8f2205a62..75005ccdd1 100644
--- a/drivers/usb/musb-new/Kconfig
+++ b/drivers/usb/musb-new/Kconfig
@@ -21,6 +21,7 @@ config USB_MUSB_GADGET
 config USB_MUSB_TI
 	bool "Enable TI OTG USB controller"
 	depends on DM_USB
+	select USB_MUSB_DSPS
 	default n
 	help
 	  Say y here to enable support for the dual role high
@@ -54,6 +55,15 @@ config USB_MUSB_SUNXI
 	Say y here to enable support for the sunxi OTG / DRC USB controller
 	used on almost all sunxi boards.
 
+config USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
+	bool "Disable MUSB bulk split/combine"
+	default y
+	help
+	  On TI AM335x devices, MUSB has bulk split/combine feature enabled
+	  in the ConfigData register, but the current MUSB driver does not
+	  support it yet. Select this option to disable the feature until the
+	  driver adds the support.
+
 endif
 
 config USB_MUSB_PIO_ONLY
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 0834ff5021..7721907d8f 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -240,7 +240,6 @@
  * add mass storage support and for gadget we add both RNDIS ethernet
  * and DFU.
  */
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
 #define CONFIG_AM335X_USB1
diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index ccbdc0a335..98ec0d626e 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -251,7 +251,6 @@
  * add mass storage support and for gadget we add both RNDIS ethernet
  * and DFU.
  */
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_HOST
 #define CONFIG_AM335X_USB1
diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h
index fb9c2a6d04..3d4d08aa70 100644
--- a/include/configs/bav335x.h
+++ b/include/configs/bav335x.h
@@ -387,7 +387,6 @@ DEFAULT_LINUX_BOOT_ENV \
  * add mass storage support and for gadget we add both RNDIS ethernet
  * and DFU.
  */
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
 #define CONFIG_AM335X_USB1
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index ae9b75bb87..84c801d10a 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -182,9 +182,6 @@ NANDTGTS \
 #define CONFIG_NAND_OMAP_GPMC_WSCFG	1
 #endif /* CONFIG_NAND */
 
-/* USB configuration */
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
-
 #if defined(CONFIG_SPI)
 /* SPI Flash */
 #define CONFIG_SYS_SPI_U_BOOT_OFFS		0x40000
diff --git a/include/configs/brxre1.h b/include/configs/brxre1.h
index 601b30dffd..7309e7d483 100644
--- a/include/configs/brxre1.h
+++ b/include/configs/brxre1.h
@@ -68,9 +68,6 @@ BUR_COMMON_ENV \
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
-/* USB configuration */
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
-
 /* Environment */
 #define CONFIG_SYS_MMC_ENV_DEV		1
 #define CONFIG_SYS_MMC_ENV_PART		2
diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
index 4372280d2b..db990fcb2b 100644
--- a/include/configs/chiliboard.h
+++ b/include/configs/chiliboard.h
@@ -148,7 +148,6 @@
 
 /* USB configuration */
 #define CONFIG_ARCH_MISC_INIT
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
index 48f1f7bacc..a535d0c2f2 100644
--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -157,7 +157,6 @@
  * board schematic and physical port wired to each.  Then for host we
  * add mass storage support.
  */
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
 #define CONFIG_AM335X_USB1
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index f44a4280f4..1170f24748 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -150,8 +150,6 @@
 /*
  * USB configuration
  */
-#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
-
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
 #define CONFIG_AM335X_USB1
diff --git a/include/usb/dwc2_udc.h b/include/usb/dwc2_udc.h
index 4068de045d..a6c12212a9 100644
--- a/include/usb/dwc2_udc.h
+++ b/include/usb/dwc2_udc.h
@@ -9,6 +9,7 @@
 #define __DWC2_USB_GADGET
 
 #define PHY0_SLEEP              (1 << 5)
+#define DWC2_MAX_HW_ENDPOINTS	16
 
 struct dwc2_plat_otg_data {
 	void		*priv;
@@ -22,8 +23,14 @@ struct dwc2_plat_otg_data {
 	unsigned int	rx_fifo_sz;
 	unsigned int	np_tx_fifo_sz;
 	unsigned int	tx_fifo_sz;
+	unsigned int	tx_fifo_sz_array[DWC2_MAX_HW_ENDPOINTS];
+	unsigned char   tx_fifo_sz_nb;
+	bool		force_b_session_valid;
+	bool		activate_stm_id_vb_detection;
 };
 
 int dwc2_udc_probe(struct dwc2_plat_otg_data *pdata);
 
+int dwc2_udc_B_session_valid(struct udevice *dev);
+
 #endif	/* __DWC2_USB_GADGET */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 5092c3fb4c..421362d953 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4537,7 +4537,6 @@ CONFIG_USB_GADGET_SUPERH
 CONFIG_USB_INVENTRA_DMA
 CONFIG_USB_ISP1301_I2C_ADDR
 CONFIG_USB_MAX_CONTROLLER_COUNT
-CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 CONFIG_USB_MUSB_TIMEOUT
 CONFIG_USB_MUSB_TUSB6010
 CONFIG_USB_OHCI_EP93XX