sh: ap325rxa: Remove the board

Last change to this board was done in 2016, has no prospects of
ever being converted to DM, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro.uh@renesas.com>

9 files changed, 0 insertions, 707 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 036f54a4df..da4bfd2cc3 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -21,10 +21,6 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_AP325RXA
-	bool "Renesas AP-325RXA"
-	select CPU_SH4
-
 config TARGET_MIGOR
 	bool "Migo-R"
 	select CPU_SH4
@@ -68,7 +64,6 @@ config SYS_CPU
 source "arch/sh/lib/Kconfig"
 
 source "board/renesas/MigoR/Kconfig"
-source "board/renesas/ap325rxa/Kconfig"
 source "board/renesas/r0p7734/Kconfig"
 source "board/renesas/r2dplus/Kconfig"
 source "board/renesas/r7780mp/Kconfig"
diff --git a/board/renesas/ap325rxa/Kconfig b/board/renesas/ap325rxa/Kconfig
deleted file mode 100644
index c8f2de2959..0000000000
--- a/board/renesas/ap325rxa/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_AP325RXA
-
-config SYS_BOARD
-	default "ap325rxa"
-
-config SYS_VENDOR
-	default "renesas"
-
-config SYS_CONFIG_NAME
-	default "ap325rxa"
-
-endif
diff --git a/board/renesas/ap325rxa/MAINTAINERS b/board/renesas/ap325rxa/MAINTAINERS
deleted file mode 100644
index bdc49c5ec9..0000000000
--- a/board/renesas/ap325rxa/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-AP325RXA BOARD
-M:	Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
-M:	Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-S:	Maintained
-F:	board/renesas/ap325rxa/
-F:	include/configs/ap325rxa.h
-F:	configs/ap325rxa_defconfig
diff --git a/board/renesas/ap325rxa/Makefile b/board/renesas/ap325rxa/Makefile
deleted file mode 100644
index 6551b940d3..0000000000
--- a/board/renesas/ap325rxa/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-######################################################################### Copyright (C) 2008 Renesas Solutions Corp.
-# Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
-#
-# board/ap325rxa/Makefile
-#
-#
-
-obj-y	:= ap325rxa.o cpld-ap325rxa.o
-extra-y	+= lowlevel_init.o
diff --git a/board/renesas/ap325rxa/ap325rxa.c b/board/renesas/ap325rxa/ap325rxa.c
deleted file mode 100644
index 700a48687d..0000000000
--- a/board/renesas/ap325rxa/ap325rxa.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-/* PRI control register */
-#define PRPRICR5	0xFF800048 /* LMB */
-#define PRPRICR5_D	0x2a
-
-/* FPGA control */
-#define FPGA_NAND_CTL	0xB410020C
-#define FPGA_NAND_RST	0x0008
-#define FPGA_NAND_INIT	0x0000
-#define FPGA_NAND_RST_WAIT	10000
-
-/* I/O port data */
-#define PACR_D	0x0000
-#define PBCR_D	0x0000
-#define PCCR_D	0x1000
-#define PDCR_D	0x0000
-#define PECR_D	0x0410
-#define PFCR_D	0xffff
-#define PGCR_D	0x0000
-#define PHCR_D	0x5011
-#define PJCR_D	0x4400
-#define PKCR_D	0x7c00
-#define PLCR_D	0x0000
-#define PMCR_D	0x0000
-#define PNCR_D	0x0000
-#define PQCR_D	0x0000
-#define PRCR_D	0x0000
-#define PSCR_D	0x0000
-#define PTCR_D	0x0010
-#define PUCR_D	0x0fff
-#define PVCR_D	0xffff
-#define PWCR_D	0x0000
-#define PXCR_D	0x7500
-#define PYCR_D	0x0000
-#define PZCR_D	0x5540
-
-/* Pin Function Controler data */
-#define PSELA_D	0x1410
-#define PSELB_D	0x0140
-#define PSELC_D	0x0000
-#define PSELD_D	0x0400
-
-/* I/O Buffer Hi-Z data */
-#define	HIZCRA_D	0x0000
-#define HIZCRB_D	0x1000
-#define HIZCRC_D	0x0000
-#define HIZCRD_D	0x0000
-
-/* Module select reg data */
-#define MSELCRA_D	0x0014
-#define MSELCRB_D	0x0018
-
-/* Module Stop reg Data */
-#define MSTPCR2_D	0xFFD9F280
-
-/* CPLD loader */
-extern void init_cpld(void);
-
-int checkboard(void)
-{
-	puts("BOARD: AP325RXA\n");
-	return 0;
-}
-
-int board_init(void)
-{
-	/* Pin Function Controler Init */
-	outw(PSELA_D, PSELA);
-	outw(PSELB_D, PSELB);
-	outw(PSELC_D, PSELC);
-	outw(PSELD_D, PSELD);
-
-	/* I/O Buffer Hi-Z Init */
-	outw(HIZCRA_D, HIZCRA);
-	outw(HIZCRB_D, HIZCRB);
-	outw(HIZCRC_D, HIZCRC);
-	outw(HIZCRD_D, HIZCRD);
-
-	/* Module select reg Init */
-	outw(MSELCRA_D, MSELCRA);
-	outw(MSELCRB_D, MSELCRB);
-
-	/* Module Stop reg Init */
-	outl(MSTPCR2_D, MSTPCR2);
-
-	/* I/O ports */
-	outw(PACR_D, PACR);
-	outw(PBCR_D, PBCR);
-	outw(PCCR_D, PCCR);
-	outw(PDCR_D, PDCR);
-	outw(PECR_D, PECR);
-	outw(PFCR_D, PFCR);
-	outw(PGCR_D, PGCR);
-	outw(PHCR_D, PHCR);
-	outw(PJCR_D, PJCR);
-	outw(PKCR_D, PKCR);
-	outw(PLCR_D, PLCR);
-	outw(PMCR_D, PMCR);
-	outw(PNCR_D, PNCR);
-	outw(PQCR_D, PQCR);
-	outw(PRCR_D, PRCR);
-	outw(PSCR_D, PSCR);
-	outw(PTCR_D, PTCR);
-	outw(PUCR_D, PUCR);
-	outw(PVCR_D, PVCR);
-	outw(PWCR_D, PWCR);
-	outw(PXCR_D, PXCR);
-	outw(PYCR_D, PYCR);
-	outw(PZCR_D, PZCR);
-
-	/* PRI control register Init */
-	outl(PRPRICR5_D, PRPRICR5);
-
-	/* cpld init */
-	init_cpld();
-
-	return 0;
-}
-
-void led_set_state(unsigned short value)
-{
-}
-
-void ide_set_reset(int idereset)
-{
-	outw(FPGA_NAND_RST, FPGA_NAND_CTL);	/* NAND RESET */
-	udelay(FPGA_NAND_RST_WAIT);
-	outw(FPGA_NAND_INIT, FPGA_NAND_CTL);
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC911X
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
-	return rc;
-}
diff --git a/board/renesas/ap325rxa/cpld-ap325rxa.c b/board/renesas/ap325rxa/cpld-ap325rxa.c
deleted file mode 100644
index 5d9dc9387e..0000000000
--- a/board/renesas/ap325rxa/cpld-ap325rxa.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/***************************************************************
- * Project:
- *	  CPLD SlaveSerial Configuration via embedded microprocessor.
- *
- * Copyright info:
- *
- *	  This is free software; you can redistribute it and/or modify
- *	  it as you like.
- *
- *	  This program is distributed in the hope that it will be useful,
- *	  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Description:
- *
- *      This is the main source file that will allow a microprocessor
- *      to configure Xilinx Virtex, Virtex-E, Virtex-EM, Virtex-II,
- *      and Spartan-II devices via the SlaveSerial Configuration Mode.
- *      This code is discussed in Xilinx Application Note, XAPP502.
- *
- * History:
- *	  3-October-2001  MN/MP  - Created
- *	  20-August-2008  Renesas Solutions - Modified to SH7723
- ****************************************************************/
-
-#include <common.h>
-
-/* Serial */
-#define SCIF_BASE 0xffe00000 /* SCIF0 */
-#define SCSMR	(vu_short *)(SCIF_BASE + 0x00)
-#define SCBRR	(vu_char *)(SCIF_BASE + 0x04)
-#define SCSCR	(vu_short *)(SCIF_BASE + 0x08)
-#define SC_TDR	(vu_char *)(SCIF_BASE + 0x0C)
-#define SC_SR	(vu_short *)(SCIF_BASE + 0x10)
-#define SCFCR	(vu_short *)(SCIF_BASE + 0x18)
-#define	RFCR	(vu_long *)0xFE400020
-
-#define SCSCR_INIT		0x0038
-#define SCSCR_CLR		0x0000
-#define SCFCR_INIT		0x0006
-#define SCSMR_INIT		0x0080
-#define RFCR_CLR		0xA400
-#define SCI_TD_E		0x0020
-#define SCI_TDRE_CLEAR	0x00df
-
-#define BPS_SETTING_VALUE	1 /* 12.5MHz */
-#define WAIT_RFCR_COUNTER	500
-
-/* CPLD data size */
-#define CPLD_DATA_SIZE	169216
-
-/* out */
-#define CPLD_PFC_ADR	((vu_short *)0xA4050112)
-
-#define CPLD_PROG_ADR	((vu_char *)0xA4050132)
-#define CPLD_PROG_DAT	0x80
-
-/* in */
-#define CPLD_INIT_ADR	((vu_char *)0xA4050132)
-#define CPLD_INIT_DAT	0x40
-#define CPLD_DONE_ADR	((vu_char *)0xA4050132)
-#define CPLD_DONE_DAT	0x20
-
-/* data */
-#define CPLD_NOMAL_START	0xA0A80000
-#define CPLD_SAFE_START		0xA0AC0000
-#define MODE_SW				(vu_char *)0xA405012A
-
-static void init_cpld_loader(void)
-{
-
-	*SCSCR = SCSCR_CLR;
-	*SCFCR = SCFCR_INIT;
-	*SCSMR = SCSMR_INIT;
-
-	*SCBRR = BPS_SETTING_VALUE;
-
-	*RFCR = RFCR_CLR; /* Refresh counter clear */
-
-	while (*RFCR < WAIT_RFCR_COUNTER)
-		;
-
-	*SCFCR = 0x0; /* RTRG=00, TTRG=00 */
-				  /* MCE=0,TFRST=0,RFRST=0,LOOP=0 */
-	*SCSCR = SCSCR_INIT;
-}
-
-static int check_write_ready(void)
-{
-	u16 status = *SC_SR;
-	return status & SCI_TD_E;
-}
-
-static void write_cpld_data(char ch)
-{
-	while (!check_write_ready())
-		;
-
-	*SC_TDR = ch;
-	*SC_SR;
-	*SC_SR = SCI_TDRE_CLEAR;
-}
-
-static int delay(void)
-{
-	int i;
-	int c = 0;
-	for (i = 0; i < 200; i++) {
-		c = *(volatile int *)0xa0000000;
-	}
-	return c;
-}
-
-/***********************************************************************
- *
- * Function:     slave_serial
- *
- * Description:  Initiates SlaveSerial Configuration.
- *               Calls ShiftDataOut() to output serial data
- *
- ***********************************************************************/
-static void slave_serial(void)
-{
-	int i;
-	unsigned char *flash;
-
-	*CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */
-	delay();
-
-	/*
-	 * Toggle Program Pin by Toggling Program_OE bit
-	 * This is accomplished by writing to the Program Register in the CPLD
-	 *
-	 * NOTE: The Program_OE bit should be driven high to bring the Virtex
-	 *      Program Pin low. Likewise, it should be driven low
-	 *      to bring the Virtex Program Pin to High-Z
-	 */
-
-	*CPLD_PROG_ADR &= ~CPLD_PROG_DAT; /* PROGRAM_OE LOW */
-	delay();
-
-	/*
-	 * Bring Program High-Z
-	 * (Drive Program_OE bit low to bring Virtex Program Pin to High-Z
-	 */
-
-	/* Program_OE bit Low brings the Virtex Program Pin to High Z: */
-	*CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */
-
-	while ((*CPLD_INIT_ADR & CPLD_INIT_DAT) == 0)
-		delay();
-
-	/* Begin Slave-Serial Configuration */
-	flash = (unsigned char *)CPLD_NOMAL_START;
-
-	for (i = 0; i < CPLD_DATA_SIZE; i++)
-		write_cpld_data(*flash++);
-}
-
-/***********************************************************************
- *
- * Function: check_done_bit
- *
- * Description: This function takes monitors the CPLD Input Register
- * 		   by checking the status of the DONE bit in that Register.
- *               By doing so, it monitors the Xilinx Virtex device's DONE
- *               Pin to see if configuration bitstream has been properly
- *               loaded
- *
- ***********************************************************************/
-static void check_done_bit(void)
-{
-	while (!(*CPLD_DONE_ADR & CPLD_DONE_DAT))
-		;
-}
-
-/***********************************************************************
- *
- * Function: init_cpld
- *
- * Description: Begins Slave Serial configuration of Xilinx FPGA
- *
- ***********************************************************************/
-void init_cpld(void)
-{
-	/* Init serial device */
-	init_cpld_loader();
-
-	if (*CPLD_DONE_ADR & CPLD_DONE_DAT)	/* Already DONE */
-		return;
-
-	*((vu_short *)HIZCRB) = 0x0000;
-	*CPLD_PFC_ADR = 0x7c00;			/* FPGA PROG = OUTPUT */
-
-	/* write CPLD data from NOR flash to device */
-	slave_serial();
-
-	/*
-	 * Monitor the DONE bit in the CPLD Input Register to see if
-	 * configuration successful
-	 */
-
-	check_done_bit();
-}
diff --git a/board/renesas/ap325rxa/lowlevel_init.S b/board/renesas/ap325rxa/lowlevel_init.S
deleted file mode 100644
index 1a24581c32..0000000000
--- a/board/renesas/ap325rxa/lowlevel_init.S
+++ /dev/null
@@ -1,170 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- *
- * board/ap325rxa/lowlevel_init.S
- */
-
-#include <config.h>
-#include <asm/processor.h>
-#include <asm/macro.h>
-
-/*
- * Board specific low level init code, called _very_ early in the
- * startup sequence. Relocation to SDRAM has not happened yet, no
- * stack is available, bss section has not been initialised, etc.
- *
- * (Note: As no stack is available, no subroutines can be called...).
- */
-
-	.global	lowlevel_init
-
-	.text
-	.align	2
-
-lowlevel_init:
-	write16	DRVCRA_A, DRVCRA_D
-
-	write16	DRVCRB_A, DRVCRB_D
-
-	write16	RWTCSR_A, RWTCSR_D1
-
-	write16	RWTCNT_A, RWTCNT_D
-
-	write16	RWTCSR_A, RWTCSR_D2
-
-	write32	FRQCR_A, FRQCR_D
-
-	write32	CMNCR_A, CMNCR_D
-
-	write32	CS0BCR_A, CS0BCR_D
-
-	write32	CS4BCR_A, CS4BCR_D
-
-	write32	CS5ABCR_A, CS5ABCR_D
-
-	write32	CS5BBCR_A, CS5BBCR_D
-
-	write32	CS6ABCR_A, CS6ABCR_D
-
-	write32	CS6BBCR_A, CS6BBCR_D
-
-	write32	CS0WCR_A, CS0WCR_D
-
-	write32	CS4WCR_A, CS4WCR_D
-
-	write32	CS5AWCR_A, CS5AWCR_D
-
-	write32	CS5BWCR_A, CS5BWCR_D
-
-	write32	CS6AWCR_A, CS6AWCR_D
-
-	write32	CS6BWCR_A, CS6BWCR_D
-
-	write32	SBSC_SDCR_A, SBSC_SDCR_D1
-
-	write32	SBSC_SDWCR_A, SBSC_SDWCR_D
-
-	write32	SBSC_SDPCR_A, SBSC_SDPCR_D
-
-	write32	SBSC_RTCSR_A, SBSC_RTCSR_D
-
-	write32	SBSC_RTCNT_A, SBSC_RTCNT_D
-
-	write32	SBSC_RTCOR_A, SBSC_RTCOR_D
-
-	write8	SBSC_SDMR3_A1, SBSC_SDMR3_D
-
-	write8	SBSC_SDMR3_A2, SBSC_SDMR3_D
-
-	mov.l	SLEEP_CNT, r1
-2:	tst	r1, r1
-	nop
-	bf/s	2b
-	dt	r1
-
-	write8	SBSC_SDMR3_A3, SBSC_SDMR3_D
-
-	write32	SBSC_SDCR_A, SBSC_SDCR_D2
-
-	write32	CCR_A, CCR_D
-
-	! BL bit off (init = ON) (?!?)
-
-	stc	sr, r0				! BL bit off(init=ON)
-	mov.l	SR_MASK_D, r1
-	and	r1, r0
-	ldc	r0, sr
-
-	rts
-	 mov	#0, r0
-
-	.align	2
-
-DRVCRA_A:	.long	DRVCRA
-DRVCRB_A:	.long	DRVCRB
-DRVCRA_D:	.word	0x4555
-DRVCRB_D:	.word	0x0005
-
-RWTCSR_A:	.long	RWTCSR
-RWTCNT_A:	.long	RWTCNT
-FRQCR_A:	.long	FRQCR
-RWTCSR_D1:	.word	0xa507
-RWTCSR_D2:	.word	0xa504
-RWTCNT_D:	.word	0x5a00
-.align 2
-FRQCR_D:	.long	0x0b04474a
-
-SBSC_SDCR_A:	.long	SBSC_SDCR
-SBSC_SDWCR_A:	.long	SBSC_SDWCR
-SBSC_SDPCR_A:	.long	SBSC_SDPCR
-SBSC_RTCSR_A:	.long	SBSC_RTCSR
-SBSC_RTCNT_A:	.long	SBSC_RTCNT
-SBSC_RTCOR_A:	.long	SBSC_RTCOR
-SBSC_SDMR3_A1:	.long	0xfe510000
-SBSC_SDMR3_A2:	.long	0xfe500242
-SBSC_SDMR3_A3:	.long	0xfe5c0042
-
-SBSC_SDCR_D1:	.long	0x92810112
-SBSC_SDCR_D2:	.long	0x92810912
-SBSC_SDWCR_D:	.long	0x05162482
-SBSC_SDPCR_D:	.long	0x00300087
-SBSC_RTCSR_D:	.long	0xa55a0212
-SBSC_RTCNT_D:	.long	0xa55a0000
-SBSC_RTCOR_D:	.long	0xa55a0040
-SBSC_SDMR3_D:	.long	0x00
-
-CMNCR_A:	.long	CMNCR
-CS0BCR_A:	.long	CS0BCR
-CS4BCR_A:	.long	CS4BCR
-CS5ABCR_A:	.long	CS5ABCR
-CS5BBCR_A:	.long	CS5BBCR
-CS6ABCR_A:	.long	CS6ABCR
-CS6BBCR_A:	.long	CS6BBCR
-CS0WCR_A:	.long	CS0WCR
-CS4WCR_A:	.long	CS4WCR
-CS5AWCR_A:	.long	CS5AWCR
-CS5BWCR_A:	.long	CS5BWCR
-CS6AWCR_A:	.long	CS6AWCR
-CS6BWCR_A:	.long	CS6BWCR
-
-CMNCR_D:	.long	0x00000013
-CS0BCR_D:	.long	0x24920400
-CS4BCR_D:	.long	0x24920400
-CS5ABCR_D:	.long	0x24920400
-CS5BBCR_D:	.long	0x7fff0600
-CS6ABCR_D:	.long	0x24920400
-CS6BBCR_D:	.long	0x24920600
-CS0WCR_D:	.long	0x00000480
-CS4WCR_D:	.long	0x00000480
-CS5AWCR_D:	.long	0x00000380
-CS5BWCR_D:	.long	0x00000080
-CS6AWCR_D:	.long	0x00000300
-CS6BWCR_D:	.long	0x00000540
-
-CCR_A:		.long	0xff00001c
-CCR_D:		.long	0x0000090d
-
-SLEEP_CNT:	.long	0x00000800
-SR_MASK_D:	.long	0xEFFFFF0F
diff --git a/configs/ap325rxa_defconfig b/configs/ap325rxa_defconfig
deleted file mode 100644
index d2f0d7fc42..0000000000
--- a/configs/ap325rxa_defconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-CONFIG_SH=y
-CONFIG_SYS_TEXT_BASE=0x8FFC0000
-CONFIG_TARGET_AP325RXA=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttySC2,38400"
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-# CONFIG_CMD_BDI is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_RUN is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_IDE=y
-CONFIG_CMD_SDRAM=y
-# CONFIG_CMD_ECHO is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SOURCE is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-# CONFIG_CMD_MISC is not set
-CONFIG_CMD_EXT2=y
-CONFIG_DOS_PARTITION=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0xB6080000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_BAUDRATE=38400
-CONFIG_SCIF_CONSOLE=y
-CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h
deleted file mode 100644
index 901ce4da61..0000000000
--- a/include/configs/ap325rxa.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Renesas Solutions AP-325RXA board
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
- */
-
-#ifndef __AP325RXA_H
-#define __AP325RXA_H
-
-#define CONFIG_CPU_SH7723	1
-
-#define CONFIG_DISPLAY_BOARDINFO
-#undef  CONFIG_SHOW_BOOT_PROGRESS
-
-/* MEMORY */
-#define AP325RXA_SDRAM_BASE		(0x88000000)
-#define AP325RXA_FLASH_BASE_1		(0xA0000000)
-#define AP325RXA_FLASH_BANK_SIZE	(128 * 1024 * 1024)
-
-/* undef to save memory	*/
-/* Monitor Command Prompt */
-/* Buffer size for Console output */
-#define CONFIG_SYS_PBSIZE		256
-/* List of legal baudrate settings for this board */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 38400 }
-
-/* SCIF */
-#define CONFIG_SCIF_A		1 /* SH7723 has SCIF and SCIFA */
-#define CONFIG_CONS_SCIF5	1
-
-/* Suppress display of console information at boot */
-
-#define CONFIG_SYS_MEMTEST_START	(AP325RXA_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-
-/* Enable alternate, more extensive, memory test */
-/* Scratch address used by the alternate memory test */
-#undef  CONFIG_SYS_MEMTEST_SCRATCH
-
-/* Enable temporary baudrate change while serial download */
-#undef  CONFIG_SYS_LOADS_BAUD_CHANGE
-
-#define CONFIG_SYS_SDRAM_BASE	(AP325RXA_SDRAM_BASE)
-/* maybe more, but if so u-boot doesn't know about it... */
-#define CONFIG_SYS_SDRAM_SIZE	(128 * 1024 * 1024)
-/* default load address for scripts ?!? */
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
-
-/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
-#define CONFIG_SYS_MONITOR_BASE	(AP325RXA_FLASH_BASE_1)
-/* Monitor size */
-#define CONFIG_SYS_MONITOR_LEN	(128 * 1024)
-/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
-#define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
-
-/* FLASH */
-#undef  CONFIG_SYS_FLASH_QUIET_TEST
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-/* Physical start address of Flash memory */
-#define CONFIG_SYS_FLASH_BASE	(AP325RXA_FLASH_BASE_1)
-/* Max number of sectors on each Flash chip */
-#define CONFIG_SYS_MAX_FLASH_SECT	512
-
-/*
- * IDE support
- */
-#define CONFIG_IDE_RESET	1
-#define CONFIG_SYS_PIO_MODE		1
-#define CONFIG_SYS_IDE_MAXBUS		1	/* IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE	1
-#define CONFIG_SYS_ATA_BASE_ADDR	0xB4180000
-#define CONFIG_SYS_ATA_STRIDE		2	/* 1bit shift */
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x200	/* data reg offset */
-#define CONFIG_SYS_ATA_REG_OFFSET	0x200	/* reg offset */
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x210	/* alternate register offset */
-#define CONFIG_IDE_SWAP_IO
-
-/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)}
-
-/* Timeout for Flash erase operations (in ms) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
-/* Timeout for Flash write operations (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
-/* Timeout for Flash set sector lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)
-/* Timeout for Flash clear lock bit operations (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
-
-/*
- * Use hardware flash sectors protection instead
- * of U-Boot software protection
- */
-#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/* ENV setting */
-#define CONFIG_ENV_OVERWRITE	1
-#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
-#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
-#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
-
-/* Board Clock */
-#define CONFIG_SYS_CLK_FREQ	33333333
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-
-#endif	/* __AP325RXA_H */