Merge branch 'master' of git://git.denx.de/u-boot-spi

- drop non-DM code from ti_qspi
- support spi-mem for ti_qspi

9 files changed, 108 insertions, 281 deletions

diff --git a/doc/driver-model/MIGRATION.txt b/doc/driver-model/MIGRATION.txt
index 957529202b..df659f3dd9 100644
--- a/doc/driver-model/MIGRATION.txt
+++ b/doc/driver-model/MIGRATION.txt
@@ -77,7 +77,6 @@ Partially converted:
 	drivers/spi/kirkwood_spi.c
 	drivers/spi/mxc_spi.c
 	drivers/spi/omap3_spi.c
-	drivers/spi/ti_qspi.c
 
 	Status: In progress
 	Deadline: 2019.07
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index a700f240ad..fb794adae7 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -259,6 +259,13 @@ config TEGRA210_QSPI
 	  be used to access SPI chips on platforms embedding this
 	  NVIDIA Tegra210 IP core.
 
+config TI_QSPI
+	bool "TI QSPI driver"
+	imply TI_EDMA3
+	help
+	  Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
+	  This driver support spi flash single, quad and memory reads.
+
 config XILINX_SPI
 	bool "Xilinx SPI driver"
 	help
@@ -346,12 +353,6 @@ config SH_QSPI
 	  Enable the Renesas Quad SPI controller driver. This driver can be
 	  used on Renesas SoCs.
 
-config TI_QSPI
-	bool "TI QSPI driver"
-	help
-	  Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
-	  This driver support spi flash single, quad and memory reads.
-
 config KIRKWOOD_SPI
 	bool "Marvell Kirkwood SPI Driver"
 	help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 01907bef79..8be9a4baa2 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -9,6 +9,7 @@ obj-y += spi-uclass.o
 obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
 obj-$(CONFIG_SOFT_SPI) += soft_spi.o
 obj-$(CONFIG_SPI_MEM) += spi-mem.o
+obj-$(CONFIG_TI_QSPI) += ti_qspi.o
 else
 obj-y += spi.o
 obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o
@@ -56,7 +57,6 @@ obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o
 obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
 obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
 obj-$(CONFIG_TEGRA210_QSPI) += tegra210_qspi.o
-obj-$(CONFIG_TI_QSPI) += ti_qspi.o
 obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o
 obj-$(CONFIG_ZYNQ_SPI) += zynq_spi.o
 obj-$(CONFIG_ZYNQ_QSPI) += zynq_qspi.o
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index 2dcce66de0..77fa17ee8a 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -10,6 +10,7 @@
 #include <asm/arch/omap.h>
 #include <malloc.h>
 #include <spi.h>
+#include <spi-mem.h>
 #include <dm.h>
 #include <asm/gpio.h>
 #include <asm/omap_gpio.h>
@@ -40,7 +41,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define QSPI_INVAL                      (4 << 16)
 #define QSPI_RD_QUAD                    (7 << 16)
 /* device control */
-#define QSPI_DD(m, n)                   (m << (3 + n*8))
 #define QSPI_CKPHA(n)                   (1 << (2 + n*8))
 #define QSPI_CSPOL(n)                   (1 << (1 + n*8))
 #define QSPI_CKPOL(n)                   (1 << (n*8))
@@ -52,22 +52,12 @@ DECLARE_GLOBAL_DATA_PTR;
 #define MM_SWITCH                       0x01
 #define MEM_CS(cs)                      ((cs + 1) << 8)
 #define MEM_CS_UNSELECT                 0xfffff8ff
-#define MMAP_START_ADDR_DRA		0x5c000000
-#define MMAP_START_ADDR_AM43x		0x30000000
-#define CORE_CTRL_IO                    0x4a002558
-
-#define QSPI_CMD_READ                   (0x3 << 0)
-#define QSPI_CMD_READ_DUAL		(0x6b << 0)
-#define QSPI_CMD_READ_QUAD              (0x6c << 0)
-#define QSPI_CMD_READ_FAST              (0x0b << 0)
-#define QSPI_SETUP0_NUM_A_BYTES         (0x3 << 8)
-#define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10)
-#define QSPI_SETUP0_NUM_D_BYTES_8_BITS  (0x1 << 10)
+
 #define QSPI_SETUP0_READ_NORMAL         (0x0 << 12)
 #define QSPI_SETUP0_READ_DUAL           (0x1 << 12)
 #define QSPI_SETUP0_READ_QUAD           (0x3 << 12)
-#define QSPI_CMD_WRITE                  (0x12 << 16)
-#define QSPI_NUM_DUMMY_BITS             (0x0 << 24)
+#define QSPI_SETUP0_ADDR_SHIFT		(8)
+#define QSPI_SETUP0_DBITS_SHIFT		(10)
 
 /* ti qspi register set */
 struct ti_qspi_regs {
@@ -98,13 +88,10 @@ struct ti_qspi_regs {
 
 /* ti qspi priv */
 struct ti_qspi_priv {
-#ifndef CONFIG_DM_SPI
-	struct spi_slave slave;
-#else
 	void *memory_map;
+	size_t mmap_size;
 	uint max_hz;
 	u32 num_cs;
-#endif
 	struct ti_qspi_regs *base;
 	void *ctrl_mod_mmap;
 	ulong fclk;
@@ -113,8 +100,9 @@ struct ti_qspi_priv {
 	u32 dc;
 };
 
-static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
+static int ti_qspi_set_speed(struct udevice *bus, uint hz)
 {
+	struct ti_qspi_priv *priv = dev_get_priv(bus);
 	uint clk_div;
 
 	if (!hz)
@@ -133,6 +121,8 @@ static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
 	       &priv->base->clk_ctrl);
 	/* enable SCLK and program the clk divider */
 	writel(QSPI_CLK_EN | clk_div, &priv->base->clk_ctrl);
+
+	return 0;
 }
 
 static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv)
@@ -142,38 +132,6 @@ static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv)
 	readl(&priv->base->cmd);
 }
 
-static int __ti_qspi_set_mode(struct ti_qspi_priv *priv, unsigned int mode)
-{
-	priv->dc = 0;
-	if (mode & SPI_CPHA)
-		priv->dc |= QSPI_CKPHA(0);
-	if (mode & SPI_CPOL)
-		priv->dc |= QSPI_CKPOL(0);
-	if (mode & SPI_CS_HIGH)
-		priv->dc |= QSPI_CSPOL(0);
-
-	return 0;
-}
-
-static int __ti_qspi_claim_bus(struct ti_qspi_priv *priv, int cs)
-{
-	writel(priv->dc, &priv->base->dc);
-	writel(0, &priv->base->cmd);
-	writel(0, &priv->base->data);
-
-	priv->dc <<= cs * 8;
-	writel(priv->dc, &priv->base->dc);
-
-	return 0;
-}
-
-static void __ti_qspi_release_bus(struct ti_qspi_priv *priv)
-{
-	writel(0, &priv->base->dc);
-	writel(0, &priv->base->cmd);
-	writel(0, &priv->base->data);
-}
-
 static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable)
 {
 	u32 val;
@@ -186,27 +144,25 @@ static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable)
 	writel(val, ctrl_mod_mmap);
 }
 
-static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
-			const void *dout, void *din, unsigned long flags,
-			u32 cs)
+static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
+			const void *dout, void *din, unsigned long flags)
 {
+	struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
+	struct ti_qspi_priv *priv;
+	struct udevice *bus;
 	uint words = bitlen >> 3; /* fixed 8-bit word length */
 	const uchar *txp = dout;
 	uchar *rxp = din;
 	uint status;
 	int timeout;
+	unsigned int cs = slave->cs;
 
-	/* Setup mmap flags */
-	if (flags & SPI_XFER_MMAP) {
-		writel(MM_SWITCH, &priv->base->memswitch);
-		if (priv->ctrl_mod_mmap)
-			ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, true);
-		return 0;
-	} else if (flags & SPI_XFER_MMAP_END) {
-		writel(~MM_SWITCH, &priv->base->memswitch);
-		if (priv->ctrl_mod_mmap)
-			ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, false);
-		return 0;
+	bus = dev->parent;
+	priv = dev_get_priv(bus);
+
+	if (cs > priv->num_cs) {
+		debug("invalid qspi chip select\n");
+		return -EINVAL;
 	}
 
 	if (bitlen == 0)
@@ -294,9 +250,9 @@ static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
 }
 
 /* TODO: control from sf layer to here through dm-spi */
-#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
-void spi_flash_copy_mmap(void *data, void *offset, size_t len)
+static void ti_qspi_copy_mmap(void *data, void *offset, size_t len)
 {
+#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
 	unsigned int			addr = (unsigned int) (data);
 	unsigned int			edma_slot_num = 1;
 
@@ -311,187 +267,85 @@ void spi_flash_copy_mmap(void *data, void *offset, size_t len)
 
 	/* disable edma3 clocks */
 	disable_edma3_clocks();
-
-	*((unsigned int *)offset) += len;
-}
-#endif
-
-#ifndef CONFIG_DM_SPI
-
-static inline struct ti_qspi_priv *to_ti_qspi_priv(struct spi_slave *slave)
-{
-	return container_of(slave, struct ti_qspi_priv, slave);
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	/* CS handled in xfer */
-	return;
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-	ti_qspi_cs_deactivate(priv);
-}
-
-void spi_init(void)
-{
-	/* nothing to do */
-}
-
-static void ti_spi_setup_spi_register(struct ti_qspi_priv *priv)
-{
-	u32 memval = 0;
-
-#ifdef CONFIG_QSPI_QUAD_SUPPORT
-	struct spi_slave *slave = &priv->slave;
-	memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES |
-			QSPI_SETUP0_NUM_D_BYTES_8_BITS |
-			QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE |
-			QSPI_NUM_DUMMY_BITS);
-	slave->mode |= SPI_RX_QUAD;
 #else
-	memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
-			QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
-			QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE |
-			QSPI_NUM_DUMMY_BITS;
+	memcpy_fromio(data, offset, len);
 #endif
 
-	writel(memval, &priv->base->setup0);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-				  unsigned int max_hz, unsigned int mode)
-{
-	struct ti_qspi_priv *priv;
-
-#ifdef CONFIG_AM43XX
-	gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio");
-	gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1);
-#endif
-
-	priv = spi_alloc_slave(struct ti_qspi_priv, bus, cs);
-	if (!priv) {
-		printf("SPI_error: Fail to allocate ti_qspi_priv\n");
-		return NULL;
-	}
-
-	priv->base = (struct ti_qspi_regs *)QSPI_BASE;
-	priv->mode = mode;
-#if defined(CONFIG_DRA7XX)
-	priv->ctrl_mod_mmap = (void *)CORE_CTRL_IO;
-	priv->slave.memory_map = (void *)MMAP_START_ADDR_DRA;
-	priv->fclk = QSPI_DRA7XX_FCLK;
-#else
-	priv->slave.memory_map = (void *)MMAP_START_ADDR_AM43x;
-	priv->fclk = QSPI_FCLK;
-#endif
-
-	ti_spi_set_speed(priv, max_hz);
-
-#ifdef CONFIG_TI_SPI_MMAP
-	ti_spi_setup_spi_register(priv);
-#endif
-
-	return &priv->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
-	struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-	free(priv);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-	struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
-	debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
-	__ti_qspi_set_mode(priv, priv->mode);
-	return __ti_qspi_claim_bus(priv, priv->slave.cs);
-}
-void spi_release_bus(struct spi_slave *slave)
-{
-	struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
-	debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
-	__ti_qspi_release_bus(priv);
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
-	     void *din, unsigned long flags)
-{
-	struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
-
-	debug("spi_xfer: bus:%i cs:%i bitlen:%i flags:%lx\n",
-	      priv->slave.bus, priv->slave.cs, bitlen, flags);
-	return __ti_qspi_xfer(priv, bitlen, dout, din, flags, priv->slave.cs);
+	*((unsigned int *)offset) += len;
 }
 
-#else /* CONFIG_DM_SPI */
-
-static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
-				      struct spi_slave *slave,
-				      bool enable)
+static void ti_qspi_setup_mmap_read(struct ti_qspi_priv *priv, u8 opcode,
+				    u8 data_nbits, u8 addr_width,
+				    u8 dummy_bytes)
 {
-	u32 memval;
-	u32 mode = slave->mode & (SPI_RX_QUAD | SPI_RX_DUAL);
-
-	if (!enable) {
-		writel(0, &priv->base->setup0);
-		return;
-	}
-
-	memval = QSPI_SETUP0_NUM_A_BYTES | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS;
+	u32 memval = opcode;
 
-	switch (mode) {
-	case SPI_RX_QUAD:
-		memval |= QSPI_CMD_READ_QUAD;
-		memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
+	switch (data_nbits) {
+	case 4:
 		memval |= QSPI_SETUP0_READ_QUAD;
-		slave->mode |= SPI_RX_QUAD;
 		break;
-	case SPI_RX_DUAL:
-		memval |= QSPI_CMD_READ_DUAL;
-		memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
+	case 2:
 		memval |= QSPI_SETUP0_READ_DUAL;
 		break;
 	default:
-		memval |= QSPI_CMD_READ;
-		memval |= QSPI_SETUP0_NUM_D_BYTES_NO_BITS;
 		memval |= QSPI_SETUP0_READ_NORMAL;
 		break;
 	}
 
+	memval |= ((addr_width - 1) << QSPI_SETUP0_ADDR_SHIFT |
+		   dummy_bytes << QSPI_SETUP0_DBITS_SHIFT);
+
 	writel(memval, &priv->base->setup0);
 }
 
-
-static int ti_qspi_set_speed(struct udevice *bus, uint max_hz)
+static int ti_qspi_set_mode(struct udevice *bus, uint mode)
 {
 	struct ti_qspi_priv *priv = dev_get_priv(bus);
 
-	ti_spi_set_speed(priv, max_hz);
+	priv->dc = 0;
+	if (mode & SPI_CPHA)
+		priv->dc |= QSPI_CKPHA(0);
+	if (mode & SPI_CPOL)
+		priv->dc |= QSPI_CKPOL(0);
+	if (mode & SPI_CS_HIGH)
+		priv->dc |= QSPI_CSPOL(0);
 
 	return 0;
 }
 
-static int ti_qspi_set_mode(struct udevice *bus, uint mode)
+static int ti_qspi_exec_mem_op(struct spi_slave *slave,
+			       const struct spi_mem_op *op)
 {
-	struct ti_qspi_priv *priv = dev_get_priv(bus);
-	return __ti_qspi_set_mode(priv, mode);
+	struct ti_qspi_priv *priv;
+	struct udevice *bus;
+
+	bus = slave->dev->parent;
+	priv = dev_get_priv(bus);
+	u32 from = 0;
+	int ret = 0;
+
+	/* Only optimize read path. */
+	if (!op->data.nbytes || op->data.dir != SPI_MEM_DATA_IN ||
+	    !op->addr.nbytes || op->addr.nbytes > 4)
+		return -ENOTSUPP;
+
+	/* Address exceeds MMIO window size, fall back to regular mode. */
+	from = op->addr.val;
+	if (from + op->data.nbytes > priv->mmap_size)
+		return -ENOTSUPP;
+
+	ti_qspi_setup_mmap_read(priv, op->cmd.opcode, op->data.buswidth,
+				op->addr.nbytes, op->dummy.nbytes);
+
+	ti_qspi_copy_mmap((void *)op->data.buf.in,
+			  (void *)priv->memory_map + from, op->data.nbytes);
+
+	return ret;
 }
 
 static int ti_qspi_claim_bus(struct udevice *dev)
 {
 	struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
-	struct spi_slave *slave = dev_get_parent_priv(dev);
 	struct ti_qspi_priv *priv;
 	struct udevice *bus;
 
@@ -503,42 +357,41 @@ static int ti_qspi_claim_bus(struct udevice *dev)
 		return -EINVAL;
 	}
 
-	__ti_qspi_setup_memorymap(priv, slave, true);
-
-	return __ti_qspi_claim_bus(priv, slave_plat->cs);
-}
-
-static int ti_qspi_release_bus(struct udevice *dev)
-{
-	struct spi_slave *slave = dev_get_parent_priv(dev);
-	struct ti_qspi_priv *priv;
-	struct udevice *bus;
+	writel(MM_SWITCH, &priv->base->memswitch);
+	if (priv->ctrl_mod_mmap)
+		ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap,
+				       slave_plat->cs, true);
 
-	bus = dev->parent;
-	priv = dev_get_priv(bus);
+	writel(priv->dc, &priv->base->dc);
+	writel(0, &priv->base->cmd);
+	writel(0, &priv->base->data);
 
-	__ti_qspi_setup_memorymap(priv, slave, false);
-	__ti_qspi_release_bus(priv);
+	priv->dc <<= slave_plat->cs * 8;
+	writel(priv->dc, &priv->base->dc);
 
 	return 0;
 }
 
-static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
-			const void *dout, void *din, unsigned long flags)
+static int ti_qspi_release_bus(struct udevice *dev)
 {
-	struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
+	struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
 	struct ti_qspi_priv *priv;
 	struct udevice *bus;
 
 	bus = dev->parent;
 	priv = dev_get_priv(bus);
 
-	if (slave->cs > priv->num_cs) {
-		debug("invalid qspi chip select\n");
-		return -EINVAL;
-	}
+	writel(~MM_SWITCH, &priv->base->memswitch);
+	if (priv->ctrl_mod_mmap)
+		ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap,
+				       slave_plat->cs, false);
 
-	return __ti_qspi_xfer(priv, bitlen, dout, din, flags, slave->cs);
+	writel(0, &priv->base->dc);
+	writel(0, &priv->base->cmd);
+	writel(0, &priv->base->data);
+	writel(0, &priv->base->setup0);
+
+	return 0;
 }
 
 static int ti_qspi_probe(struct udevice *bus)
@@ -594,12 +447,15 @@ static int ti_qspi_ofdata_to_platdata(struct udevice *bus)
 	struct ti_qspi_priv *priv = dev_get_priv(bus);
 	const void *blob = gd->fdt_blob;
 	int node = dev_of_offset(bus);
+	fdt_addr_t mmap_addr;
+	fdt_addr_t mmap_size;
 
 	priv->ctrl_mod_mmap = map_syscon_chipselects(bus);
 	priv->base = map_physmem(devfdt_get_addr(bus),
 				 sizeof(struct ti_qspi_regs), MAP_NOCACHE);
-	priv->memory_map = map_physmem(devfdt_get_addr_index(bus, 1), 0,
-				       MAP_NOCACHE);
+	mmap_addr = devfdt_get_addr_size_index(bus, 1, &mmap_size);
+	priv->memory_map = map_physmem(mmap_addr, mmap_size, MAP_NOCACHE);
+	priv->mmap_size = mmap_size;
 
 	priv->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", -1);
 	if (priv->max_hz < 0) {
@@ -614,15 +470,9 @@ static int ti_qspi_ofdata_to_platdata(struct udevice *bus)
 	return 0;
 }
 
-static int ti_qspi_child_pre_probe(struct udevice *dev)
-{
-	struct spi_slave *slave = dev_get_parent_priv(dev);
-	struct udevice *bus = dev_get_parent(dev);
-	struct ti_qspi_priv *priv = dev_get_priv(bus);
-
-	slave->memory_map = priv->memory_map;
-	return 0;
-}
+static const struct spi_controller_mem_ops ti_qspi_mem_ops = {
+	.exec_op = ti_qspi_exec_mem_op,
+};
 
 static const struct dm_spi_ops ti_qspi_ops = {
 	.claim_bus	= ti_qspi_claim_bus,
@@ -630,6 +480,7 @@ static const struct dm_spi_ops ti_qspi_ops = {
 	.xfer		= ti_qspi_xfer,
 	.set_speed	= ti_qspi_set_speed,
 	.set_mode	= ti_qspi_set_mode,
+	.mem_ops        = &ti_qspi_mem_ops,
 };
 
 static const struct udevice_id ti_qspi_ids[] = {
@@ -646,6 +497,4 @@ U_BOOT_DRIVER(ti_qspi) = {
 	.ofdata_to_platdata = ti_qspi_ofdata_to_platdata,
 	.priv_auto_alloc_size = sizeof(struct ti_qspi_priv),
 	.probe	= ti_qspi_probe,
-	.child_pre_probe = ti_qspi_child_pre_probe,
 };
-#endif /* CONFIG_DM_SPI */
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 5a6080645a..37d058ebbc 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -120,12 +120,6 @@
 #define CONFIG_ENV_OFFSET_REDUND       0x120000
 #endif
 
-/* SPI */
-#define CONFIG_TI_SPI_MMAP
-#define CONFIG_QSPI_SEL_GPIO                   48
-#define CONFIG_QSPI_QUAD_SUPPORT
-#define CONFIG_TI_EDMA3
-
 #ifndef CONFIG_SPL_BUILD
 #include <environment/ti/dfu.h>
 #include <environment/ti/mmc.h>
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 48999847ee..c14b010550 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -92,11 +92,6 @@
 #define CONFIG_SYS_SPI_ARGS_SIZE        0x80000
 
 /* SPI SPL */
-#define CONFIG_TI_EDMA3
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
 
-/* SPI */
-#define CONFIG_TI_SPI_MMAP
-#define CONFIG_QSPI_QUAD_SUPPORT
-
 #endif /* __CONFIG_AM57XX_EVM_H */
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index ffe4a44c86..e4e37e5bbb 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -53,9 +53,6 @@
 #define CONFIG_USB_XHCI_OMAP
 #define CONFIG_AM437X_USB2PHY2_HOST
 
-/* SPI Flash support */
-#define CONFIG_TI_SPI_MMAP
-
 /* Power */
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 7441f4a69d..f6be6595fe 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -72,10 +72,6 @@
 #define CONFIG_NET_RETRY_COUNT		10
 #define CONFIG_PHY_TI
 
-/* SPI */
-#define CONFIG_TI_SPI_MMAP
-#define CONFIG_QSPI_QUAD_SUPPORT
-
 /*
  * Default to using SPI for environment, etc.
  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
@@ -98,7 +94,6 @@
 #endif
 
 /* SPI SPL */
-#define CONFIG_TI_EDMA3
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
 
 #define CONFIG_SUPPORT_EMMC_BOOT
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 7d1ea243b1..5092c3fb4c 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1555,8 +1555,6 @@ CONFIG_QE
 CONFIG_QEMU_MIPS
 CONFIG_QIXIS_I2C_ACCESS
 CONFIG_QSPI
-CONFIG_QSPI_QUAD_SUPPORT
-CONFIG_QSPI_SEL_GPIO
 CONFIG_QUOTA
 CONFIG_R7780MP
 CONFIG_R8A66597_BASE_ADDR
@@ -4399,7 +4397,6 @@ CONFIG_THUNDERX
 CONFIG_TIMESTAMP
 CONFIG_TIZEN
 CONFIG_TI_KSNAV
-CONFIG_TI_SPI_MMAP
 CONFIG_TMU_TIMER
 CONFIG_TPL_PAD_TO
 CONFIG_TPM_TIS_BASE_ADDRESS