mips: jz47xx: Add Creator CI20 platform

Add support for the Creator CI20 platform based on the JZ4780 SoC.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Marek Vasut <marex@denx.de>

10 files changed, 650 insertions, 0 deletions

diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index b447141f87..647d2bf0d5 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -16,6 +16,7 @@ dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
 dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb
 dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb
 dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
+dtb-$(CONFIG_TARGET_JZ4780_CI20) += ci20.dtb
 
 targets += $(dtb-y)
 
diff --git a/arch/mips/dts/ci20.dts b/arch/mips/dts/ci20.dts
new file mode 100644
index 0000000000..8d6417af73
--- /dev/null
+++ b/arch/mips/dts/ci20.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+#include "jz4780.dtsi"
+
+/ {
+	compatible = "img,ci20", "ingenic,jz4780";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x10000000
+		       0x30000000 0x30000000>;
+	};
+};
+
+&ext {
+	clock-frequency = <48000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&nemc {
+	status = "okay";
+
+	nandc: nand-controller@1 {
+		compatible = "ingenic,jz4780-nand";
+		reg = <1 0 0x1000000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ingenic,bch-controller = <&bch>;
+
+		ingenic,nemc-tAS = <10>;
+		ingenic,nemc-tAH = <5>;
+		ingenic,nemc-tBP = <10>;
+		ingenic,nemc-tAW = <15>;
+		ingenic,nemc-tSTRV = <100>;
+
+		nand@1 {
+			reg = <1>;
+
+			nand-ecc-step-size = <1024>;
+			nand-ecc-strength = <24>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <2>;
+				#size-cells = <2>;
+
+				partition@0 {
+					label = "u-boot-spl";
+					reg = <0x0 0x0 0x0 0x800000>;
+				};
+
+				partition@0x800000 {
+					label = "u-boot";
+					reg = <0x0 0x800000 0x0 0x200000>;
+				};
+
+				partition@0xa00000 {
+					label = "u-boot-env";
+					reg = <0x0 0xa00000 0x0 0x200000>;
+				};
+
+				partition@0xc00000 {
+					label = "boot";
+					reg = <0x0 0xc00000 0x0 0x4000000>;
+				};
+
+				partition@0x8c00000 {
+					label = "system";
+					reg = <0x0 0x4c00000 0x1 0xfb400000>;
+				};
+			};
+		};
+	};
+};
+
+&bch {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	status = "okay";
+};
diff --git a/arch/mips/mach-jz47xx/Kconfig b/arch/mips/mach-jz47xx/Kconfig
index cd6944cfc2..dcaac01628 100644
--- a/arch/mips/mach-jz47xx/Kconfig
+++ b/arch/mips/mach-jz47xx/Kconfig
@@ -12,4 +12,15 @@ config SOC_JZ4780
 	help
 	  Support for Ingenic JZ4780 family SoCs.
 
+choice
+	prompt "Board select"
+
+config TARGET_JZ4780_CI20
+	bool "Creator CI20 Reference Board"
+	select SOC_JZ4780
+
+endchoice
+
+source "board/imgtec/ci20/Kconfig"
+
 endmenu
diff --git a/board/imgtec/ci20/Kconfig b/board/imgtec/ci20/Kconfig
new file mode 100644
index 0000000000..82bf65d64f
--- /dev/null
+++ b/board/imgtec/ci20/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_JZ4780_CI20
+
+config SYS_BOARD
+	default "ci20"
+
+config SYS_VENDOR
+	default "imgtec"
+
+config SYS_CONFIG_NAME
+	default "ci20"
+
+config SYS_TEXT_BASE
+	default 0x80000000
+
+endif
diff --git a/board/imgtec/ci20/MAINTAINERS b/board/imgtec/ci20/MAINTAINERS
new file mode 100644
index 0000000000..dca6bf3537
--- /dev/null
+++ b/board/imgtec/ci20/MAINTAINERS
@@ -0,0 +1,6 @@
+Creator CI20 BOARD
+M:      Ezequiel Garcia <ezequiel@collabora.com>
+S:      Maintained
+F:      board/imgtec/ci20/
+F:      include/configs/ci20.h
+F:      configs/ci20_mmc_defconfig
diff --git a/board/imgtec/ci20/Makefile b/board/imgtec/ci20/Makefile
new file mode 100644
index 0000000000..7843b46791
--- /dev/null
+++ b/board/imgtec/ci20/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y := ci20.o
diff --git a/board/imgtec/ci20/README b/board/imgtec/ci20/README
new file mode 100644
index 0000000000..07d89d7e2b
--- /dev/null
+++ b/board/imgtec/ci20/README
@@ -0,0 +1,10 @@
+CI20 U-Boot
+
+Installation to an SD card:
+  Repartition your card with an MBR such that the first partition starts at an
+  offset of no less than 270KB. Then install U-Boot SPL & the full U-Boot image
+  to the card like so:
+
+    dd if=spl/u-boot-spl.bin of=/dev/sdX obs=512 seek=1
+    dd if=u-boot-dtb.img of=/dev/sdX obs=1K seek=14
+    sync
diff --git a/board/imgtec/ci20/ci20.c b/board/imgtec/ci20/ci20.c
new file mode 100644
index 0000000000..9811ef559f
--- /dev/null
+++ b/board/imgtec/ci20/ci20.c
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * CI20 setup code
+ *
+ * Copyright (c) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ */
+
+#include <common.h>
+#include <environment.h>
+#include <net.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <mach/jz4780.h>
+#include <mach/jz4780_dram.h>
+#include <mach/jz4780_gpio.h>
+
+struct ci20_otp {
+	u32	serial_number;
+	u32	date;
+	u8	manufacturer[2];
+	u8	mac[6];
+} __packed;
+
+static void ci20_mux_mmc(void)
+{
+	void __iomem *gpio_regs = (void __iomem *)GPIO_BASE;
+
+	/* setup MSC1 pins */
+	writel(0x30f00000, gpio_regs + GPIO_PXINTC(4));
+	writel(0x30f00000, gpio_regs + GPIO_PXMASKC(4));
+	writel(0x30f00000, gpio_regs + GPIO_PXPAT1C(4));
+	writel(0x30f00000, gpio_regs + GPIO_PXPAT0C(4));
+	writel(0x30f00000, gpio_regs + GPIO_PXPENC(4));
+	jz4780_clk_ungate_mmc();
+}
+
+#ifndef CONFIG_SPL_BUILD
+
+static void ci20_mux_eth(void)
+{
+	void __iomem *gpio_regs = (void __iomem *)GPIO_BASE;
+
+#ifdef CONFIG_NAND
+	/* setup pins (some already setup for NAND) */
+	writel(0x04030000, gpio_regs + GPIO_PXINTC(0));
+	writel(0x04030000, gpio_regs + GPIO_PXMASKC(0));
+	writel(0x04030000, gpio_regs + GPIO_PXPAT1C(0));
+	writel(0x04030000, gpio_regs + GPIO_PXPAT0C(0));
+	writel(0x04030000, gpio_regs + GPIO_PXPENS(0));
+#else
+	/* setup pins (as above +NAND CS +RD/WE +SDx +SAx) */
+	writel(0x0dff00ff, gpio_regs + GPIO_PXINTC(0));
+	writel(0x0dff00ff, gpio_regs + GPIO_PXMASKC(0));
+	writel(0x0dff00ff, gpio_regs + GPIO_PXPAT1C(0));
+	writel(0x0dff00ff, gpio_regs + GPIO_PXPAT0C(0));
+	writel(0x0dff00ff, gpio_regs + GPIO_PXPENS(0));
+	writel(0x00000003, gpio_regs + GPIO_PXINTC(1));
+	writel(0x00000003, gpio_regs + GPIO_PXMASKC(1));
+	writel(0x00000003, gpio_regs + GPIO_PXPAT1C(1));
+	writel(0x00000003, gpio_regs + GPIO_PXPAT0C(1));
+	writel(0x00000003, gpio_regs + GPIO_PXPENS(1));
+#endif
+}
+
+static void ci20_mux_jtag(void)
+{
+#ifdef CONFIG_JTAG
+	void __iomem *gpio_regs = (void __iomem *)GPIO_BASE;
+
+	/* enable JTAG */
+	writel(3 << 30, gpio_regs + GPIO_PXINTC(0));
+	writel(3 << 30, gpio_regs + GPIO_PXMASKC(0));
+	writel(3 << 30, gpio_regs + GPIO_PXPAT1C(0));
+	writel(3 << 30, gpio_regs + GPIO_PXPAT0C(0));
+#endif
+}
+
+static void ci20_mux_nand(void)
+{
+	void __iomem *gpio_regs = (void __iomem *)GPIO_BASE;
+
+	/* setup pins */
+	writel(0x002c00ff, gpio_regs + GPIO_PXINTC(0));
+	writel(0x002c00ff, gpio_regs + GPIO_PXMASKC(0));
+	writel(0x002c00ff, gpio_regs + GPIO_PXPAT1C(0));
+	writel(0x002c00ff, gpio_regs + GPIO_PXPAT0C(0));
+	writel(0x002c00ff, gpio_regs + GPIO_PXPENS(0));
+	writel(0x00000003, gpio_regs + GPIO_PXINTC(1));
+	writel(0x00000003, gpio_regs + GPIO_PXMASKC(1));
+	writel(0x00000003, gpio_regs + GPIO_PXPAT1C(1));
+	writel(0x00000003, gpio_regs + GPIO_PXPAT0C(1));
+	writel(0x00000003, gpio_regs + GPIO_PXPENS(1));
+
+	/* FRB0_N */
+	jz47xx_gpio_direction_input(JZ_GPIO(0, 20));
+	writel(20, gpio_regs + GPIO_PXPENS(0));
+
+	/* disable write protect */
+	jz47xx_gpio_direction_output(JZ_GPIO(5, 22), 1);
+}
+
+static void ci20_mux_uart(void)
+{
+	void __iomem *gpio_regs = (void __iomem *)GPIO_BASE;
+
+	/* UART0 */
+	writel(0x9, gpio_regs + GPIO_PXINTC(5));
+	writel(0x9, gpio_regs + GPIO_PXMASKC(5));
+	writel(0x9, gpio_regs + GPIO_PXPAT1C(5));
+	writel(0x9, gpio_regs + GPIO_PXPAT0C(5));
+	writel(0x9, gpio_regs + GPIO_PXPENC(5));
+	jz4780_clk_ungate_uart(0);
+
+	/* UART 1 and 2 */
+	jz4780_clk_ungate_uart(1);
+	jz4780_clk_ungate_uart(2);
+
+#ifndef CONFIG_JTAG
+	/* UART3 */
+	writel(1 << 12, gpio_regs + GPIO_PXINTC(3));
+	writel(1 << 12, gpio_regs + GPIO_PXMASKS(3));
+	writel(1 << 12, gpio_regs + GPIO_PXPAT1S(3));
+	writel(1 << 12, gpio_regs + GPIO_PXPAT0C(3));
+	writel(3 << 30, gpio_regs + GPIO_PXINTC(0));
+	writel(3 << 30, gpio_regs + GPIO_PXMASKC(0));
+	writel(3 << 30, gpio_regs + GPIO_PXPAT1C(0));
+	writel(1 << 30, gpio_regs + GPIO_PXPAT0C(0));
+	writel(1 << 31, gpio_regs + GPIO_PXPAT0S(0));
+	jz4780_clk_ungate_uart(3);
+#endif
+
+	/* UART4 */
+	writel(0x100400, gpio_regs + GPIO_PXINTC(2));
+	writel(0x100400, gpio_regs + GPIO_PXMASKC(2));
+	writel(0x100400, gpio_regs + GPIO_PXPAT1S(2));
+	writel(0x100400, gpio_regs + GPIO_PXPAT0C(2));
+	writel(0x100400, gpio_regs + GPIO_PXPENC(2));
+	jz4780_clk_ungate_uart(4);
+}
+
+int board_early_init_f(void)
+{
+	ci20_mux_jtag();
+	ci20_mux_uart();
+
+	ci20_mux_eth();
+	ci20_mux_mmc();
+	ci20_mux_nand();
+
+	/* SYS_POWER_IND high (LED blue, VBUS off) */
+	jz47xx_gpio_direction_output(JZ_GPIO(5, 15), 0);
+
+	/* LEDs off */
+	jz47xx_gpio_direction_output(JZ_GPIO(2, 0), 0);
+	jz47xx_gpio_direction_output(JZ_GPIO(2, 1), 0);
+	jz47xx_gpio_direction_output(JZ_GPIO(2, 2), 0);
+	jz47xx_gpio_direction_output(JZ_GPIO(2, 3), 0);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	const u32 efuse_clk = jz4780_clk_get_efuse_clk();
+	struct ci20_otp otp;
+	char manufacturer[3];
+
+	/* Read the board OTP data */
+	jz4780_efuse_init(efuse_clk);
+	jz4780_efuse_read(0x18, 16, (u8 *)&otp);
+
+	/* Set MAC address */
+	if (!is_valid_ethaddr(otp.mac)) {
+		/* no MAC assigned, generate one from the unique chip ID */
+		jz4780_efuse_read(0x8, 4, &otp.mac[0]);
+		jz4780_efuse_read(0x12, 2, &otp.mac[4]);
+		otp.mac[0] = (otp.mac[0] | 0x02) & ~0x01;
+	}
+	eth_env_set_enetaddr("ethaddr", otp.mac);
+
+	/* Put other board information into the environment */
+	env_set_ulong("serial#", otp.serial_number);
+	env_set_ulong("board_date", otp.date);
+	manufacturer[0] = otp.manufacturer[0];
+	manufacturer[1] = otp.manufacturer[1];
+	manufacturer[2] = 0;
+	env_set("board_mfr", manufacturer);
+
+	return 0;
+}
+
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+	/* Enable clock */
+	jz4780_clk_ungate_ethernet();
+
+	/* Enable power (PB25) */
+	jz47xx_gpio_direction_output(JZ_GPIO(1, 25), 1);
+
+	/* Reset (PF12) */
+	mdelay(10);
+	jz47xx_gpio_direction_output(JZ_GPIO(5, 12), 0);
+	mdelay(10);
+	jz47xx_gpio_direction_output(JZ_GPIO(5, 12), 1);
+	mdelay(10);
+
+	return dm9000_initialize(bis);
+}
+#endif /* CONFIG_DRIVER_DM9000 */
+#endif
+
+static u8 ci20_revision(void)
+{
+	void __iomem *gpio_regs = (void __iomem *)GPIO_BASE;
+	int val;
+
+	jz47xx_gpio_direction_input(JZ_GPIO(2, 18));
+	jz47xx_gpio_direction_input(JZ_GPIO(2, 19));
+
+	/* Enable pullups */
+	writel(BIT(18) | BIT(19), gpio_regs + GPIO_PXPENC(2));
+
+	/* Read PC18/19 for version */
+	val = (!!jz47xx_gpio_get_value(JZ_GPIO(2, 18))) |
+	     ((!!jz47xx_gpio_get_value(JZ_GPIO(2, 19))) << 1);
+
+	if (val == 3)	/* Rev 1 boards had no pulldowns - giving 3 */
+		return 1;
+	if (val == 1)	/* Rev 2 boards pulldown port C bit 18 giving 1 */
+		return 2;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = sdram_size(0) + sdram_size(1);
+	return 0;
+}
+
+/* U-Boot common routines */
+int checkboard(void)
+{
+	printf("Board: Creator CI20 (rev.%d)\n", ci20_revision());
+	return 0;
+}
+
+#ifdef CONFIG_SPL_BUILD
+
+#if defined(CONFIG_SPL_MMC_SUPPORT)
+int board_mmc_init(bd_t *bd)
+{
+	ci20_mux_mmc();
+	return jz_mmc_init((void __iomem *)MSC0_BASE);
+}
+#endif
+
+static const struct jz4780_ddr_config K4B2G0846Q_48_config = {
+	.timing = {
+		(4 << DDRC_TIMING1_TRTP_BIT) | (13 << DDRC_TIMING1_TWTR_BIT) |
+		(6 << DDRC_TIMING1_TWR_BIT) | (5 << DDRC_TIMING1_TWL_BIT),
+
+		(4 << DDRC_TIMING2_TCCD_BIT) | (15 << DDRC_TIMING2_TRAS_BIT) |
+		(6 << DDRC_TIMING2_TRCD_BIT) | (6 << DDRC_TIMING2_TRL_BIT),
+
+		(4 << DDRC_TIMING3_ONUM) | (7 << DDRC_TIMING3_TCKSRE_BIT) |
+		(6 << DDRC_TIMING3_TRP_BIT) | (4 << DDRC_TIMING3_TRRD_BIT) |
+		(21 << DDRC_TIMING3_TRC_BIT),
+
+		(31 << DDRC_TIMING4_TRFC_BIT) | (1 << DDRC_TIMING4_TRWCOV_BIT) |
+		(4 << DDRC_TIMING4_TCKE_BIT) | (9 << DDRC_TIMING4_TMINSR_BIT) |
+		(8 << DDRC_TIMING4_TXP_BIT) | (3 << DDRC_TIMING4_TMRD_BIT),
+
+		(8 << DDRC_TIMING5_TRTW_BIT) | (4 << DDRC_TIMING5_TRDLAT_BIT) |
+		(4 << DDRC_TIMING5_TWDLAT_BIT),
+
+		(25 << DDRC_TIMING6_TXSRD_BIT) | (12 << DDRC_TIMING6_TFAW_BIT) |
+		(2 << DDRC_TIMING6_TCFGW_BIT) | (2 << DDRC_TIMING6_TCFGR_BIT),
+	},
+
+	/* PHY */
+	/* Mode Register 0 */
+	.mr0 = 0x420,
+#ifdef SDRAM_DISABLE_DLL
+	.mr1 = (DDR3_MR1_DIC_7 | DDR3_MR1_RTT_DIS | DDR3_MR1_DLL_DISABLE),
+#else
+	.mr1 = (DDR3_MR1_DIC_7 | DDR3_MR1_RTT_DIS),
+#endif
+
+	.ptr0 = 0x002000d4,
+	.ptr1 = 0x02230d40,
+	.ptr2 = 0x04013880,
+
+	.dtpr0 = 0x2a8f6690,
+	.dtpr1 = 0x00400860,
+	.dtpr2 = 0x10042a00,
+
+	.pullup = 0x0b,
+	.pulldn = 0x0b,
+};
+
+static const struct jz4780_ddr_config H5TQ2G83CFR_48_config = {
+	.timing = {
+		(4 << DDRC_TIMING1_TRTP_BIT) | (13 << DDRC_TIMING1_TWTR_BIT) |
+		(6 << DDRC_TIMING1_TWR_BIT) | (5 << DDRC_TIMING1_TWL_BIT),
+
+		(4 << DDRC_TIMING2_TCCD_BIT) | (16 << DDRC_TIMING2_TRAS_BIT) |
+		(6 << DDRC_TIMING2_TRCD_BIT) | (6 << DDRC_TIMING2_TRL_BIT),
+
+		(4 << DDRC_TIMING3_ONUM) | (7 << DDRC_TIMING3_TCKSRE_BIT) |
+		(6 << DDRC_TIMING3_TRP_BIT) | (4 << DDRC_TIMING3_TRRD_BIT) |
+		(22 << DDRC_TIMING3_TRC_BIT),
+
+		(42 << DDRC_TIMING4_TRFC_BIT) | (1 << DDRC_TIMING4_TRWCOV_BIT) |
+		(4 << DDRC_TIMING4_TCKE_BIT) | (7 << DDRC_TIMING4_TMINSR_BIT) |
+		(3 << DDRC_TIMING4_TXP_BIT) | (3 << DDRC_TIMING4_TMRD_BIT),
+
+		(8 << DDRC_TIMING5_TRTW_BIT) | (4 << DDRC_TIMING5_TRDLAT_BIT) |
+		(4 << DDRC_TIMING5_TWDLAT_BIT),
+
+		(25 << DDRC_TIMING6_TXSRD_BIT) | (20 << DDRC_TIMING6_TFAW_BIT) |
+		(2 << DDRC_TIMING6_TCFGW_BIT) | (2 << DDRC_TIMING6_TCFGR_BIT),
+	},
+
+	/* PHY */
+	/* Mode Register 0 */
+	.mr0 = 0x420,
+#ifdef SDRAM_DISABLE_DLL
+	.mr1 = (DDR3_MR1_DIC_7 | DDR3_MR1_RTT_DIS | DDR3_MR1_DLL_DISABLE),
+#else
+	.mr1 = (DDR3_MR1_DIC_7 | DDR3_MR1_RTT_DIS),
+#endif
+
+	.ptr0 = 0x002000d4,
+	.ptr1 = 0x02d30d40,
+	.ptr2 = 0x04013880,
+
+	.dtpr0 = 0x2c906690,
+	.dtpr1 = 0x005608a0,
+	.dtpr2 = 0x10042a00,
+
+	.pullup = 0x0e,
+	.pulldn = 0x0e,
+};
+
+#if (CONFIG_SYS_MHZ != 1200)
+#error No DDR configuration for CPU speed
+#endif
+
+const struct jz4780_ddr_config *jz4780_get_ddr_config(void)
+{
+	const int board_revision = ci20_revision();
+
+	if (board_revision == 2)
+		return &K4B2G0846Q_48_config;
+	else /* Fall back to H5TQ2G83CFR RAM */
+		return &H5TQ2G83CFR_48_config;
+}
+#endif
diff --git a/configs/ci20_mmc_defconfig b/configs/ci20_mmc_defconfig
new file mode 100644
index 0000000000..c1b1c3f7e9
--- /dev/null
+++ b/configs/ci20_mmc_defconfig
@@ -0,0 +1,48 @@
+CONFIG_MIPS=y
+CONFIG_SPL_LDSCRIPT="arch/mips/mach-jz47xx/jz4780/u-boot-spl.lds"
+CONFIG_SYS_TEXT_BASE=0x80010000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_ARCH_JZ47XX=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_FIT=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS4,115200 rw rootwait root=/dev/mmcblk0p1"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="ext4load mmc 0:1 0x88000000 /boot/uImage; bootm 0x88000000"
+CONFIG_MISC_INIT_R=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_BOARD_EARLY_INIT_F=y
+# CONFIG_SPL_BANNER_PRINT is not set
+# CONFIG_TPL_BANNER_PRINT is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="ci20"
+CONFIG_ENV_IS_IN_MMC=y
+# CONFIG_DM_WARN is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_JZ4780_EFUSE=y
+CONFIG_MMC=y
+CONFIG_MMC_BROKEN_CD=y
+CONFIG_DM_MMC=y
+# CONFIG_MMC_HW_PARTITIONING is not set
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+# CONFIG_MMC_VERBOSE is not set
+CONFIG_SPL_MMC_TINY=y
+CONFIG_JZ47XX_MMC=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_LZO=y
diff --git a/include/configs/ci20.h b/include/configs/ci20.h
new file mode 100644
index 0000000000..9a3621329d
--- /dev/null
+++ b/include/configs/ci20.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * CI20 configuration
+ *
+ * Copyright (c) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ */
+
+#ifndef __CONFIG_CI20_H__
+#define __CONFIG_CI20_H__
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* Ingenic JZ4780 clock configuration. */
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_MHZ			1200
+#define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
+
+/* Memory configuration */
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)
+#define CONFIG_SYS_BOOTPARAMS_LEN	(128 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE		0x80000000 /* cached (KSEG0) address */
+#define CONFIG_SYS_INIT_SP_OFFSET	0x400000
+#define CONFIG_SYS_LOAD_ADDR		0x81000000
+#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x88000000
+
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
+
+/* NS16550-ish UARTs */
+#define CONFIG_SYS_NS16550_CLK		48000000
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* Ethernet: davicom DM9000 */
+#define CONFIG_DRIVER_DM9000		1
+#define CONFIG_DM9000_BASE		0xb6000000
+#define DM9000_IO			CONFIG_DM9000_BASE
+#define DM9000_DATA			(CONFIG_DM9000_BASE + 2)
+
+/* Environment */
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_SIZE			(32 << 10)
+#define CONFIG_ENV_OFFSET		((14 + 512) << 10)
+#define CONFIG_ENV_OVERWRITE
+
+/* Command line configuration. */
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
+#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+						/* Boot argument buffer size */
+#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
+
+/* Miscellaneous configuration options */
+#define CONFIG_SYS_BOOTM_LEN		(64 << 20)
+
+/* SPL */
+#define CONFIG_SPL_STACK		0xf4008000 /* only max. 2KB spare! */
+
+#define CONFIG_SPL_TEXT_BASE		0xf4000a00
+#define CONFIG_SPL_MAX_SIZE		((14 * 1024) - 0xa00)
+
+#define CONFIG_SPL_BSS_START_ADDR	0xf4004000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x00002000 /* 512KB, arbitrary */
+
+#define CONFIG_SPL_START_S_PATH		"arch/mips/mach-jz47xx"
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x1c	/* 14 KiB offset */
+
+#endif /* __CONFIG_CI20_H__ */