Add cmd_process() to process commands in one place

We currently have the same code in hush.c and main.c. This brings the
code into one place.

As an added feature, if the command function returns CMD_RET_USAGE then
cmd_process() will print a usage message for the command before
returning the standard failure code of 1.

ARM code size increases about 32 bytes with this clean-up.

Signed-off-by: Simon Glass <sjg@chromium.org>

4 files changed, 81 insertions, 78 deletions

diff --git a/common/command.c b/common/command.c
index fe290759cd0..aa0fb0a3d36 100644
--- a/common/command.c
+++ b/common/command.c
@@ -499,7 +499,7 @@ void fixup_cmdtable(cmd_tbl_t *cmdtp, int size)
  * @param argv		Arguments
  * @return 0 if command succeeded, else non-zero (CMD_RET_...)
  */
-int cmd_call(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int cmd_call(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int result;
 
@@ -508,3 +508,42 @@ int cmd_call(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		debug("Command failed, result=%d", result);
 	return result;
 }
+
+enum command_ret_t cmd_process(int flag, int argc, char * const argv[],
+			       int *repeatable)
+{
+	enum command_ret_t rc = CMD_RET_SUCCESS;
+	cmd_tbl_t *cmdtp;
+
+	/* Look up command in command table */
+	cmdtp = find_cmd(argv[0]);
+	if (cmdtp == NULL) {
+		printf("Unknown command '%s' - try 'help'\n", argv[0]);
+		return 1;
+	}
+
+	/* found - check max args */
+	if (argc > cmdtp->maxargs)
+		rc = CMD_RET_USAGE;
+
+#if defined(CONFIG_CMD_BOOTD)
+	/* avoid "bootd" recursion */
+	else if (cmdtp->cmd == do_bootd) {
+		if (flag & CMD_FLAG_BOOTD) {
+			puts("'bootd' recursion detected\n");
+			rc = CMD_RET_FAILURE;
+		} else {
+			flag |= CMD_FLAG_BOOTD;
+		}
+	}
+#endif
+
+	/* If OK so far, then do the command */
+	if (!rc) {
+		rc = cmd_call(cmdtp, flag, argc, argv);
+		*repeatable &= cmdtp->repeatable;
+	}
+	if (rc == CMD_RET_USAGE)
+		rc = cmd_usage(cmdtp);
+	return rc;
+}
diff --git a/common/hush.c b/common/hush.c
index 3aa9d501138..672ab9e157e 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -1538,7 +1538,6 @@ static int run_pipe_real(struct pipe *pi)
 	int nextin;
 	int flag = do_repeat ? CMD_FLAG_REPEAT : 0;
 	struct child_prog *child;
-	cmd_tbl_t *cmdtp;
 	char *p;
 # if __GNUC__
 	/* Avoid longjmp clobbering */
@@ -1652,47 +1651,20 @@ static int run_pipe_real(struct pipe *pi)
 			return rcode;
 		}
 #else
-			/* check ";", because ,example , argv consist from
-			 * "help;flinfo" must not execute
-			 */
-			if (strchr(child->argv[i], ';')) {
-				printf ("Unknown command '%s' - try 'help' or use 'run' command\n",
-					child->argv[i]);
-				return -1;
-			}
-			/* Look up command in command table */
-
-
-			if ((cmdtp = find_cmd(child->argv[i])) == NULL) {
-				printf ("Unknown command '%s' - try 'help'\n", child->argv[i]);
-				return -1;	/* give up after bad command */
-			} else {
-				int rcode;
-#if defined(CONFIG_CMD_BOOTD)
-				/* avoid "bootd" recursion */
-				if (cmdtp->cmd == do_bootd) {
-					if (flag & CMD_FLAG_BOOTD) {
-						printf ("'bootd' recursion detected\n");
-						return -1;
-					}
-				else
-					flag |= CMD_FLAG_BOOTD;
-				}
-#endif
-				/* found - check max args */
-				if ((child->argc - i) > cmdtp->maxargs)
-					return cmd_usage(cmdtp);
-#endif
-				/* OK - call function to do the command */
-				rcode = cmd_call(cmdtp, flag,  child->argc,
-						 child->argv);
-				if (!cmdtp->repeatable)
-					flag_repeat = 0;
-				return rcode;
-			}
+		/* check ";", because ,example , argv consist from
+		 * "help;flinfo" must not execute
+		 */
+		if (strchr(child->argv[i], ';')) {
+			printf("Unknown command '%s' - try 'help' or use "
+					"'run' command\n", child->argv[i]);
+			return -1;
 		}
-#ifndef __U_BOOT__
+		/* Process the command */
+		return cmd_process(flag, child->argc, child->argv,
+				   &flag_repeat);
+#endif
 	}
+#ifndef __U_BOOT__
 
 	for (i = 0; i < pi->num_progs; i++) {
 		child = & (pi->progs[i]);
diff --git a/common/main.c b/common/main.c
index 6a3eac28aa7..4adc17a9f78 100644
--- a/common/main.c
+++ b/common/main.c
@@ -1261,7 +1261,6 @@ static void process_macros (const char *input, char *output)
  */
 static int builtin_run_command(const char *cmd, int flag)
 {
-	cmd_tbl_t *cmdtp;
 	char cmdbuf[CONFIG_SYS_CBSIZE];	/* working copy of cmd		*/
 	char *token;			/* start of token in cmdbuf	*/
 	char *sep;			/* end of token (separator) in cmdbuf */
@@ -1339,41 +1338,7 @@ static int builtin_run_command(const char *cmd, int flag)
 			continue;
 		}
 
-		/* Look up command in command table */
-		if ((cmdtp = find_cmd(argv[0])) == NULL) {
-			printf ("Unknown command '%s' - try 'help'\n", argv[0]);
-			rc = -1;	/* give up after bad command */
-			continue;
-		}
-
-		/* found - check max args */
-		if (argc > cmdtp->maxargs) {
-			cmd_usage(cmdtp);
-			rc = -1;
-			continue;
-		}
-
-#if defined(CONFIG_CMD_BOOTD)
-		/* avoid "bootd" recursion */
-		if (cmdtp->cmd == do_bootd) {
-#ifdef DEBUG_PARSER
-			printf ("[%s]\n", finaltoken);
-#endif
-			if (flag & CMD_FLAG_BOOTD) {
-				puts ("'bootd' recursion detected\n");
-				rc = -1;
-				continue;
-			} else {
-				flag |= CMD_FLAG_BOOTD;
-			}
-		}
-#endif
-
-		/* OK - call function to do the command */
-		if (cmd_call(cmdtp, flag, argc, argv) != 0)
-			rc = -1;
-
-		repeatable &= cmdtp->repeatable;
+		rc = cmd_process(flag, argc, argv, &repeatable);
 
 		/* Did the user stop this? */
 		if (had_ctrlc ())
diff --git a/include/command.h b/include/command.h
index 6dc694f7a83..6e1bdc2ab27 100644
--- a/include/command.h
+++ b/include/command.h
@@ -112,7 +112,34 @@ static inline int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd)
 #endif
 extern int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 
-int cmd_call(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+/*
+ * Error codes that commands return to cmd_process(). We use the standard 0
+ * and 1 for success and failure, but add one more case - failure with a
+ * request to call cmd_usage(). But the cmd_process() function handles
+ * CMD_RET_USAGE itself and after calling cmd_usage() it will return 1.
+ * This is just a convenience for commands to avoid them having to call
+ * cmd_usage() all over the place.
+ */
+enum command_ret_t {
+	CMD_RET_SUCCESS,	/* 0 = Success */
+	CMD_RET_FAILURE,	/* 1 = Failure */
+	CMD_RET_USAGE = -1,	/* Failure, please report 'usage' error */
+};
+
+/**
+ * Process a command with arguments. We look up the command and execute it
+ * if valid. Otherwise we print a usage message.
+ *
+ * @param flag		Some flags normally 0 (see CMD_FLAG_.. above)
+ * @param argc		Number of arguments (arg 0 must be the command text)
+ * @param argv		Arguments
+ * @param repeatable	This function sets this to 0 if the command is not
+ *			repeatable. If the command is repeatable, the value
+ *			is left unchanged.
+ * @return 0 if the command succeeded, 1 if it failed
+ */
+int cmd_process(int flag, int argc, char * const argv[],
+			       int *repeatable);
 
 #endif	/* __ASSEMBLY__ */