summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2006-09-12 08:49:07 +0200
committerStefan Roese <sr@denx.de>2006-09-12 08:49:07 +0200
commita73c8dbb437fb55ecb660cb962c8c1cc85b8a654 (patch)
tree8d383c53c34301062acbf565746de0475356eca1
parent98e43917dc89631c46d0b8eb481345041912ebee (diff)
Update NAND boot documentation
Patch by Stefan Roese, 12 Sep 2006
-rw-r--r--CHANGELOG5
-rw-r--r--Makefile4
-rw-r--r--doc/README.nand-boot-ppc44024
-rw-r--r--nand_spl/board/amcc/sequoia/Makefile4
4 files changed, 32 insertions, 5 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 4265049a2e9..a6dc7623483 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,7 +2,10 @@
Changes since U-Boot 1.1.4:
======================================================================
-* Add documentation on the latest build environment extensions to
+* Update NAND boot documentation
+ Patch by Stefan Roese, 12 Sep 2006
+
+* Add documentation on the latest build environment extensions to
the README file.
* Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory.
diff --git a/Makefile b/Makefile
index 291dc61055f..84d936701f8 100644
--- a/Makefile
+++ b/Makefile
@@ -78,7 +78,7 @@ saved-output := $(BUILD_DIR)
# Attempt to create a output directory.
$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
-# Verify if it was successful.
+# Verify if it was successful.
BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
endif # ifneq ($(BUILD_DIR),)
@@ -272,7 +272,7 @@ $(NAND_SPL): version
$(MAKE) -C nand_spl all
$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
- cat nand_spl/u-boot-spl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
+ cat nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
version:
@echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \
diff --git a/doc/README.nand-boot-ppc440 b/doc/README.nand-boot-ppc440
index a82a10ee6a5..a1c1d8c4447 100644
--- a/doc/README.nand-boot-ppc440
+++ b/doc/README.nand-boot-ppc440
@@ -33,4 +33,28 @@ is set up. While still running from cache, I experienced problems accessing
the NAND controller.
+Example: Build and install NAND boot image for Sequoia (440EPx):
+
+a) Configure for sequoia with NAND boot support:
+# make sequoia_nand_config
+
+b) Build image(s)
+# make
+
+This will generate the SPL image in the "nand_spl" directory:
+nand_spl/u-boot-spl.bin
+Also another image is created spanning a whole NAND block (16kBytes):
+nand_spl/u-boot-spl-16k.bin
+The main NAND U-Boot image is generated in the toplevel directory:
+u-boot.bin
+A combined image of u-boot-spl-16k.bin and u-boot.bin is also created:
+u-boot-nand.bin
+
+This image should be programmed at offset 0 in the NAND flash:
+
+# tftp 100000 /tftpboot/sequoia/u-boot-nand.bin
+# nand erase 0 60000
+# nand write 100000 0 60000
+
+
September 07 2006, Stefan Roese <sr@denx.de>
diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile
index 6c07e3dd8df..897aa8b6b70 100644
--- a/nand_spl/board/amcc/sequoia/Makefile
+++ b/nand_spl/board/amcc/sequoia/Makefile
@@ -35,11 +35,11 @@ COBJS = nand_boot.o ndfc.o sdram.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-ALL = u-boot-spl u-boot-spl.bin u-boot-spl-4k.bin
+ALL = u-boot-spl u-boot-spl.bin u-boot-spl-16k.bin
all: $(obj).depend $(ALL)
-u-boot-spl-4k.bin: u-boot-spl
+u-boot-spl-16k.bin: u-boot-spl
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
u-boot-spl.bin: u-boot-spl