summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJiang Yutang <b14898@freescale.com>2011-03-04 10:25:54 +0800
committerKumar Gala <galak@kernel.crashing.org>2011-04-10 11:17:55 -0500
commitb93f81a418d0768d22a8c7cc8e8c5441e5439249 (patch)
treeb4abcef37a0ffa8db07105d6a7019ecbaf149eda
parent218a758fb96f3a0e5c18b4bbef8aa2a2f9eb0e35 (diff)
powerpc/85xx: Add support usb2/etsec and tdm/audio pin multiplex on P1022DS
For soc which have pin multiplex relation, some of them can't enable simultaneously. This patch add environment var 'hwconfig' content defination for them. you can enable some one function by setting environment var 'hwconfig' content and reset board. Detail setting please refer doc/README.p1022ds Signed-off-by: Jiang Yutang <b14898@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-rw-r--r--arch/powerpc/include/asm/immap_85xx.h10
-rw-r--r--board/freescale/p1022ds/p1022ds.c56
-rw-r--r--doc/README.p1022ds24
3 files changed, 79 insertions, 11 deletions
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 5118fe07b68..b51017b5509 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1937,7 +1937,17 @@ typedef struct ccsr_gur {
#define MPC85xx_PMUXCR_QE10 0x00000020
#define MPC85xx_PMUXCR_QE11 0x00000010
#define MPC85xx_PMUXCR_QE12 0x00000008
+#if defined(CONFIG_P1013) || defined(CONFIG_P1022)
+#define MPC85xx_PMUXCR_TDM_MASK 0x0001cc00
+#define MPC85xx_PMUXCR_TDM 0x00014800
+#define MPC85xx_PMUXCR_SPI_MASK 0x00600000
+#define MPC85xx_PMUXCR_SPI 0x00000000
+#endif
u32 pmuxcr2; /* Alt. function signal multiplex control 2 */
+#if defined(CONFIG_P1013) || defined(CONFIG_P1022)
+#define MPC85xx_PMUXCR2_ETSECUSB_MASK 0x001f1000
+#define MPC85xx_PMUXCR2_USB 0x00150000
+#endif
u8 res6[8];
u32 devdisr; /* Device disable control */
#define MPC85xx_DEVDISR_PCI1 0x80000000
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 6f20dc3b9b6..8b78404b85d 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -93,11 +93,19 @@ int checkboard(void)
/* Choose the 11.2896Mhz codec reference clock */
#define CONFIG_PIXIS_BRDCFG1_AUDCLK_11 0x01
+/* Connect to USB2 */
+#define CONFIG_PIXIS_BRDCFG0_USB2 0x10
+/* Connect to TFM bus */
+#define CONFIG_PIXIS_BRDCFG1_TDM 0x0c
+/* Connect to SPI */
+#define CONFIG_PIXIS_BRDCFG0_SPI 0x80
+
int misc_init_r(void)
{
u8 temp;
const char *audclk;
size_t arglen;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
/* For DVI, enable the TFP410 Encoder. */
@@ -115,22 +123,48 @@ int misc_init_r(void)
return -1;
debug("DVI Encoder Read: 0x%02x\n",temp);
+ /* Enable the USB2 in PMUXCR2 and FGPA */
+ if (hwconfig("usb2")) {
+ clrsetbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_ETSECUSB_MASK,
+ MPC85xx_PMUXCR2_USB);
+ setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_USB2);
+ }
+
+ /* tdm and audio can not enable simultaneous*/
+ if (hwconfig("tdm") && hwconfig("audclk")){
+ printf("WARNING: TDM and AUDIO can not be enabled simultaneous !\n");
+ return -1;
+ }
+
+ /* Enable the TDM in PMUXCR and FGPA */
+ if (hwconfig("tdm")) {
+ clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TDM_MASK,
+ MPC85xx_PMUXCR_TDM);
+ setbits_8(&pixis->brdcfg1, CONFIG_PIXIS_BRDCFG1_TDM);
+ /* TDM need some configration option by SPI */
+ clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SPI_MASK,
+ MPC85xx_PMUXCR_SPI);
+ setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_SPI);
+ }
+
/*
* Enable the reference clock for the WM8776 codec, and route the MUX
* pins for SSI. The default is the 12.288 MHz clock
*/
- temp = in_8(&pixis->brdcfg1) & ~(CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK |
- CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK);
- temp |= CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI;
-
- audclk = hwconfig_arg("audclk", &arglen);
- /* Check the first two chars only */
- if (audclk && (strncmp(audclk, "11", 2) == 0))
- temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_11;
- else
- temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_12;
- out_8(&pixis->brdcfg1, temp);
+ if (hwconfig("audclk")) {
+ temp = in_8(&pixis->brdcfg1) & ~(CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK |
+ CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK);
+ temp |= CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI;
+
+ audclk = hwconfig_arg("audclk", &arglen);
+ /* Check the first two chars only */
+ if (audclk && (strncmp(audclk, "11", 2) == 0))
+ temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_11;
+ else
+ temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_12;
+ setbits_8(&pixis->brdcfg1, temp);
+ }
return 0;
}
diff --git a/doc/README.p1022ds b/doc/README.p1022ds
new file mode 100644
index 00000000000..473ecf62179
--- /dev/null
+++ b/doc/README.p1022ds
@@ -0,0 +1,24 @@
+Overview
+--------
+P1022ds is a Low End Dual core platform supporting the P1022 processor
+of QorIQ series. P1022 is an e500 based dual core SOC.
+
+
+Pin Multiplex(hwconfig setting)
+-------------------------------
+Add the environment 'usb2', 'audclk' and 'tdm' to support pin multiplex
+via hwconfig, i.e:
+'setenv hwconfig usb2' to enable USB2 and disable eTsec2
+'setenv hwconfig tdm' to enable TDM and disable Audio
+'setenv hwconfig audclk:12' to enable Audio(codec clock sources is 12MHz)
+ and disable TDM
+'setenv hwconfig 'usb2;tdm' to enable USB2 and TDM, disable eTsec2 and Audio
+'setenv hwconfig 'usb2;audclk:11' to enable USB2 and Audio(codec clock sources
+ is 11MHz), disable eTsec2 and TDM
+
+Warning: TDM and AUDIO can not enable simultaneous !
+and AUDIO codec clock sources only setting as 11MHz or 12MHz !
+'setenv hwconfig 'audclk:12;tdm' --- error !
+'setenv hwconfig 'audclk:11;tdm' --- error !
+'setenv hwconfig 'audclk:10' --- error !
+