sunxi: Remove board defconfig-s for specific Q8 tablet PCB-s

We now have generic q8_a?3_defconfig files for Q8 formfactor tablets with
an A13 / A23 / A33 SoC, there is no need for these PCB variant specific
defconfig-s and they only serve to confuse the user.

Note that in case of the forfun_q88db_defconfig and TZX-Q8-713B7_defconfig
for A13 based Q8 tablets there is not even a dts file for these in the
upstream kernel, which is all the more reason to remove them.

The generic q8_a?3_defconfig files have been tested on an Et_q8_v1_6,
Ippo_q8h_v1_2_a33_1024x600, Ippo_q8h_v1_2 and TZX-Q8-713B7 tablet, and the
forfun_q88db_defconfig is identical to q8_a13_tablet_defconfig.

This leaves only the Ippo_q8h_v5 untested with the new generic defconfigs
but there is no reason to assume that it will not work.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

14 files changed, 0 insertions, 633 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 65b42308f2c..fb953ebd53e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -107,14 +107,12 @@ dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a10s-r7-tv-dongle.dtb \
 	sun5i-a10s-wobo-i5.dtb \
 	sun5i-a13-ampe-a76.dtb \
-	sun5i-a13-forfun-q88db.dtb \
 	sun5i-a13-hsg-h702.dtb \
 	sun5i-a13-inet-86vs.dtb \
 	sun5i-a13-inet-98v-rev2.dtb \
 	sun5i-a13-olinuxino.dtb \
 	sun5i-a13-olinuxino-micro.dtb \
 	sun5i-a13-q8-tablet.dtb \
-	sun5i-a13-tzx-q8-713b7.dtb \
 	sun5i-a13-utoo-p66.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \
@@ -152,13 +150,9 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 dtb-$(CONFIG_MACH_SUN8I_A23) += \
 	sun8i-a23-evb.dtb \
 	sun8i-a23-gt90h-v4.dtb \
-	sun8i-a23-ippo-q8h-v5.dtb \
-	sun8i-a23-ippo-q8h-v1.2.dtb \
 	sun8i-a23-q8-tablet.dtb
 dtb-$(CONFIG_MACH_SUN8I_A33) += \
-	sun8i-a33-et-q8-v1.6.dtb \
 	sun8i-a33-ga10h-v1.1.dtb \
-	sun8i-a33-ippo-q8h-v1.2.dtb \
 	sun8i-a33-q8-tablet.dtb \
 	sun8i-a33-sinlinx-sina33.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
diff --git a/arch/arm/dts/sun5i-a13-forfun-q88db.dts b/arch/arm/dts/sun5i-a13-forfun-q88db.dts
deleted file mode 100644
index 24de86c1d7e..00000000000
--- a/arch/arm/dts/sun5i-a13-forfun-q88db.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * Minimal dts file for the Forfun Q88db for u-boot only
- *
- * SPDX-License-Identifier:     GPL-2.0+ or X11
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-
-/ {
-	model = "Forfun Q88db";
-	compatible = "forfun,q88db", "allwinner,sun5i-a13";
-
-	aliases {
-		serial0 = &uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
-	status = "okay";
-};
diff --git a/arch/arm/dts/sun5i-a13-tzx-q8-713b7.dts b/arch/arm/dts/sun5i-a13-tzx-q8-713b7.dts
deleted file mode 100644
index 47f630eec0b..00000000000
--- a/arch/arm/dts/sun5i-a13-tzx-q8-713b7.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * Minimal dts file for the TZX Q8 713b7 for u-boot only
- *
- * SPDX-License-Identifier:     GPL-2.0+ or X11
- */
-
-/dts-v1/;
-#include "sun5i-a13.dtsi"
-
-/ {
-	model = "TZX Q8 713b7";
-	compatible = "tzx,q8-713b7", "allwinner,sun5i-a13";
-
-	aliases {
-		serial0 = &uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
-	status = "okay";
-};
diff --git a/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts
deleted file mode 100644
index 382d64c3b78..00000000000
--- a/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate
- * dtb file since some gpio-s surrounding the wlan/bluetooth are different,
- * and it uses different camera sensors.
- */
-
-#include "sun8i-a23-ippo-q8h-v5.dts"
-
-/ {
-	model = "Ippo Q8H Dual Core Tablet (v1.2)";
-	compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23";
-};
diff --git a/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts
deleted file mode 100644
index 8d9da6886a4..00000000000
--- a/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright 2014 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a23.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-/ {
-	model = "Ippo Q8H Dual Core Tablet (v5)";
-	compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
-
-	aliases {
-		serial0 = &r_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
-	/* pull-ups and devices require PMIC regulator */
-	status = "failed";
-};
-
-&lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
-	vmmc-supply = <&reg_vcc3v0>;
-	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&r_uart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_uart_pins_a>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
diff --git a/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts
deleted file mode 100644
index 19db844863b..00000000000
--- a/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright 2015 Vishnu Patekar
- * Vishnu Patekar <vishnupatekar0510@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-/ {
-	model = "ET Q8 Quad Core Tablet (v1.6)";
-	compatible = "et,q8-v1.6", "allwinner,sun8i-a33";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
diff --git a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts
deleted file mode 100644
index a43897515fb..00000000000
--- a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-/ {
-	model = "Ippo Q8H Quad Core Tablet (v1.2)";
-	compatible = "ippo,a33-q8h-v1.2", "allwinner,sun8i-a33";
-
-	aliases {
-		serial0 = &r_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-};
-
-&lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
-	vmmc-supply = <&reg_vcc3v0>;
-	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&r_uart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_uart_pins_a>;
-	status = "okay";
-};
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 67a9d294d2f..c6371eaa396 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -48,8 +48,6 @@ F:	configs/Wits_Pro_A20_DKT_defconfig
 F:	include/configs/sun8i.h
 F:	configs/ga10h_v1_1_defconfig
 F:	configs/gt90h_v4_defconfig
-F:	configs/Ippo_q8h_v1_2_defconfig
-F:	configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
 F:	configs/q8_a23_tablet_800x480_defconfig
 F:	configs/q8_a33_tablet_800x480_defconfig
 F:	configs/q8_a33_tablet_1024x600_defconfig
@@ -94,16 +92,6 @@ F:	include/configs/sun7i.h
 F:	configs/Cubieboard2_defconfig
 F:	configs/Cubietruck_defconfig
 
-ET Q8 V1.6 Tablet BOARD
-M:	VishnuPatekar <vishnupatekar0510@gmail.com>
-S:	Maintained
-F:	configs/Et_q8_v1_6_defconfig
-
-FORFUN-Q88DB TABLET
-M:	Jens Lucius <info@jenslucius.com>
-S:	Maintained
-F:	configs/forfun_q88db_defconfig
-
 GEMEI-G9 TABLET
 M:	Priit Laes <plaes@plaes.org>
 S:	Maintained
@@ -129,11 +117,6 @@ M:	Michal Suchanek <hramrach@gmail.com>
 S:	Maintained
 F:	configs/iNet_86VS_defconfig
 
-IPPO-Q8H-V5 BOARD
-M:	Chen-Yu Tsai <wens@csie.org>
-S:	Maintained
-F:	configs/Ippo_q8h_v5_defconfig
-
 LINKSPRITE-PCDUINO BOARD
 M:	Zoltan Herpai <wigyori@uid0.hu>
 S:	Maintained
@@ -185,11 +168,6 @@ S:	Maintained
 F:	configs/Sinlinx_SinA33_defconfig
 W:	http://linux-sunxi.org/Sinlinx_SinA33
 
-TZX-Q8-713B7 BOARD
-M:	Paul Kocialkowski <contact@paulk.fr>
-S:	Maintained
-F:	configs/TZX-Q8-713B7_defconfig
-
 WEXLER-TAB7200 BOARD
 M:	Aleksei Mamlin <mamlinav@gmail.com>
 S:	Maintained
diff --git a/configs/Et_q8_v1_6_defconfig b/configs/Et_q8_v1_6_defconfig
deleted file mode 100644
index 65b8e1a67b9..00000000000
--- a/configs/Et_q8_v1_6_defconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I_A33=y
-CONFIG_DRAM_CLK=480
-CONFIG_DRAM_ZQ=15291
-CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
-CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
-CONFIG_AXP_GPIO=y
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_DCLK_PHASE=0
-CONFIG_VIDEO_LCD_POWER="PH7"
-CONFIG_VIDEO_LCD_BL_EN="PH6"
-CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-et-q8-v1.6"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
-CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
deleted file mode 100644
index 40ccf8fd929..00000000000
--- a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I_A33=y
-CONFIG_DRAM_CLK=480
-CONFIG_DRAM_ZQ=15291
-CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
-CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
-CONFIG_USB0_ID_DET="PH8"
-CONFIG_AXP_GPIO=y
-CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:159,ri:160,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_DCLK_PHASE=0
-CONFIG_VIDEO_LCD_POWER="PH7"
-CONFIG_VIDEO_LCD_BL_EN="PH6"
-CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
-CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig
deleted file mode 100644
index 5b49c446ed6..00000000000
--- a/configs/Ippo_q8h_v1_2_defconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I_A23=y
-CONFIG_DRAM_CLK=432
-CONFIG_DRAM_ZQ=63306
-CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
-CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
-CONFIG_USB0_ID_DET="PH8"
-CONFIG_AXP_GPIO=y
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:167,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_DCLK_PHASE=0
-CONFIG_VIDEO_LCD_POWER="PH7"
-CONFIG_VIDEO_LCD_BL_EN="PH6"
-CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v1.2"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
-CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig
deleted file mode 100644
index 53168604da2..00000000000
--- a/configs/Ippo_q8h_v5_defconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I_A23=y
-CONFIG_DRAM_CLK=480
-CONFIG_DRAM_ZQ=63351
-CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
-CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
-CONFIG_USB0_ID_DET="PH8"
-CONFIG_AXP_GPIO=y
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_DCLK_PHASE=0
-CONFIG_VIDEO_LCD_POWER="PH7"
-CONFIG_VIDEO_LCD_BL_EN="PH6"
-CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_AXP221_DLDO1_VOLT=3300
-CONFIG_AXP221_ALDO1_VOLT=3000
-CONFIG_USB_MUSB_HOST=y
diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig
deleted file mode 100644
index f5e3574a902..00000000000
--- a/configs/TZX-Q8-713B7_defconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN5I=y
-CONFIG_DRAM_CLK=408
-CONFIG_MMC0_CD_PIN="PG0"
-CONFIG_USB0_VBUS_PIN="PG12"
-CONFIG_USB0_VBUS_DET="PG1"
-CONFIG_AXP_GPIO=y
-# CONFIG_VIDEO_HDMI is not set
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_POWER="AXP0-0"
-CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
-CONFIG_VIDEO_LCD_BL_PWM="PB2"
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-tzx-q8-713b7"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_USB_MUSB_HOST=y
diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig
deleted file mode 100644
index 30e09370e64..00000000000
--- a/configs/forfun_q88db_defconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN5I=y
-CONFIG_DRAM_CLK=384
-CONFIG_USB0_VBUS_PIN="PG12"
-CONFIG_USB0_VBUS_DET="PG1"
-CONFIG_AXP_GPIO=y
-# CONFIG_VIDEO_HDMI is not set
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_POWER="AXP0-0"
-CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
-CONFIG_VIDEO_LCD_BL_PWM="PB2"
-CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-forfun-q88db"
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_USB_MUSB_HOST=y