LogicPD Support for OMAP3/DM3/AM3 boards 2.4 Update

5 files changed, 53 insertions, 25 deletions

diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c
index 09bce91bba9..472f34c98e0 100644
--- a/arch/arm/cpu/armv7/omap3/sys_info.c
+++ b/arch/arm/cpu/armv7/omap3/sys_info.c
@@ -33,16 +33,24 @@
 
 extern omap3_sysinfo sysinfo;
 static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-static char *rev_s[CPU_3XX_MAX_REV] = {
+static char *rev_s[] = {
 				"1.0",
 				"2.0",
 				"2.1",
 				"3.0",
 				"3.1",
-				"UNKNOWN",
-				"UNKNOWN",
+				NULL,
+				NULL,
 				"3.1.2"};
 
+/* Return CPU revision string for known revisions or "unknown" */
+static char *get_rev_str(unsigned int rev)
+{
+	if (rev >= ARRAY_SIZE(rev_s) || !rev_s[rev])
+		return "Unknown";
+	return rev_s[rev];
+}
+
 /*****************************************************************
  * dieid_num_r(void) - read and set die ID
  *****************************************************************/
@@ -428,7 +436,7 @@ int print_cpuinfo (void)
 
 	printf("%s%s-%s ES%s, CPU-OPP2, L3-%uMHz, Max CPU Clock %s\n",
 			cpu_family_s, cpu_s, sec_s,
-		rev_s[get_cpu_rev()], l3_ick, max_clk);
+		get_rev_str(get_cpu_rev()), l3_ick, max_clk);
 
 	return 0;
 }
diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h
index 117ad1ee611..b38faed44d8 100644
--- a/arch/arm/include/asm/arch-omap3/omap3.h
+++ b/arch/arm/include/asm/arch-omap3/omap3.h
@@ -213,7 +213,6 @@ struct gpio {
 #define CPU_3XX_ES30		3
 #define CPU_3XX_ES31		4
 #define CPU_3XX_ES312		7
-#define CPU_3XX_MAX_REV		8
 
 #define CPU_3XX_ID_SHIFT	28
 
diff --git a/board/ti/logic/logic-display.c b/board/ti/logic/logic-display.c
index d0efb36e26b..8f684aae69f 100644
--- a/board/ti/logic/logic-display.c
+++ b/board/ti/logic/logic-display.c
@@ -138,6 +138,24 @@ struct logic_panel logic_panels[] = {
 		},
 	},
 	{
+		.name	= "28",
+		.config = OMAP_DSS_LCD_TFT,
+		.acb	= 0x0,
+		.data_lines = 16,
+		.timing = {
+			/* 480 x 272, LQ043T1DG28 */
+			.x_res		= 480,
+			.y_res		= 272,
+			.pixel_clock	= 9000,
+			.hfp		= 3,
+			.hsw		= 42,
+			.hbp		= 2,
+			.vfp		= 2,
+			.vsw		= 11,
+			.vbp		= 4,
+		},
+	},
+	{
 		.name	= "3",
 		.config	= OMAP_DSS_LCD_TFT,
 		.acb	= 0x28,
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 6bb37a5660a..82f7d4c318d 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -64,9 +64,10 @@ void omap_dma_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
 		return;
 	}
 
-	/* Invalidate the datacache for the buffer, program the DMA and wait
-	 * for it to finish */
-	invalidate_dcache_range((unsigned long)p, (unsigned long)(p + len));
+	/* Invalidate the data cache for the buffer, program the DMA and wait   *
+	 * for it to finish. buf is a word pointer, len is a byte count, so we  *
+	 * need to calculate the range using (len / 2)                          */
+	invalidate_dcache_range((unsigned long)p, (unsigned long)(p + (len / 2)));
 
 
 	/* Transfer the data(and wait to complete) */
@@ -657,7 +658,15 @@ void omap_nand_switch_ecc(enum omap_nand_ecc_mode mode)
 
 	nand->options |= NAND_OWN_BUFFERS;
 
-	/* Reset ecc interface */
+#ifdef CONFIG_OMAP_DMA
+	omap3_dma_channel_init(DMA_CHANNEL_NAND, -1, CSDP_DATA_TYPE_32BIT, CCR_SRC_AMODE_CONSTANT, CCR_DST_AMODE_POST_INC);
+	if (nand->options & NAND_BUSWIDTH_16)
+		nand->read_buf = omap_dma_read_buf16;
+	else
+		printf("%s: Huh? not 16-bit for DMA\n", __FUNCTION__);
+#endif
+
+		/* Reset ecc interface */
 	nand->ecc.read_page = NULL;
 	nand->ecc.write_page = NULL;
 	nand->ecc.read_oob = NULL;
@@ -731,13 +740,6 @@ void omap_nand_switch_ecc(enum omap_nand_ecc_mode mode)
 		nand->ecc.hwctl = omap_enable_chip_hwecc;
 		nand->ecc.correct = omap_correct_chip_hwecc;
 		nand->ecc.read_oob = omap_read_oob_chipecc;
-#ifdef CONFIG_OMAP_DMA
-		omap3_dma_channel_init(DMA_CHANNEL_NAND, -1, CSDP_DATA_TYPE_32BIT, CCR_SRC_AMODE_CONSTANT, CCR_DST_AMODE_POST_INC);
-		if (nand->options & NAND_BUSWIDTH_16)
-			nand->read_buf = omap_dma_read_buf16;
-		else
-			printf("%s: Huh? not 16-bit for DMA\n", __FUNCTION__);
-#endif
 		nand->ecc.mode = NAND_ECC_CHIP; /* internal to chip */
 		nand->ecc.layout = &chip_nand_oob;
 		if (nand->options & NAND_BUSWIDTH_16)
diff --git a/include/configs/omap3logic.h b/include/configs/omap3logic.h
index 882349f65ed..f2713a95b3a 100644
--- a/include/configs/omap3logic.h
+++ b/include/configs/omap3logic.h
@@ -305,14 +305,15 @@
 	"  echo\n"                                                                                  \
 	"  echo =================================== NOTICE ===================================\n"   \
 	"  echo \"The U-Boot environment was not found. If the display is not set properly     \"\n"\
-	"  echo \"linux will not have video support.\"\n"	                                          \
+	"  echo \"linux will not have video support.\"\n"	                                    \
 	"  echo \n"                                                                                 \
 	"  echo \"Valid display options are:\"\n"                                                   \
-	"  echo \"  2 == LQ121S1DG31     TFT SVGA    (12.1)  Sharp\"\n"	                          \
+	"  echo \"  2 == LQ121S1DG31     TFT SVGA    (12.1)  Sharp\"\n"	                            \
 	"  echo \"  3 == LQ036Q1DA01     TFT QVGA    (3.6)   Sharp w/ASIC\"\n"                      \
-	"  echo \"  5 == LQ064D343       TFT VGA     (6.4)   Sharp\"\n"	                          \
-	"  echo \"  7 == LQ10D368        TFT VGA     (10.4)  Sharp\"\n"	                          \
-	"  echo \" 15 == LQ043T1DG01     TFT WQVGA   (4.3)   Sharp (DEFAULT)\"\n"                   \
+	"  echo \"  5 == LQ064D343       TFT VGA     (6.4)   Sharp\"\n"	                            \
+	"  echo \"  7 == LQ10D368        TFT VGA     (10.4)  Sharp\"\n"	                            \
+	"  echo \" 15 == LQ043T1DG01     TFT WQVGA   (4.3)   Sharp\"\n"                             \
+	"  echo \" 28 == LQ043T1DG28     TFT WQVGA   (4.3)   Sharp (DEFAULT)\"\n"                   \
 	"  echo \" vga[-16 OR -24]       LCD VGA     640x480\"\n"                                   \
 	"  echo \" svga[-16 OR -24]      LCD SVGA    800x600\"\n"                                   \
 	"  echo \" xga[-16 OR -24]       LCD XGA     1024x768\"\n"                                  \
@@ -320,9 +321,9 @@
 	"  echo \" sxga[-16 OR -24]      LCD SXGA    1280x1024\"\n"                                 \
 	"  echo \" uxga[-16 OR -24]      LCD UXGA    1600x1200\"\n"                                 \
 	"  echo \n "                                                                                \
-	"  echo \"Default `display` environment variable is now being set to: 15\"\n"               \
-	"  setenv display 15\n"						                          \
-	"  setenv preboot\n"						                          \
+	"  echo \"Default `display` environment variable is now being set to: 28\"\n"               \
+	"  setenv display 28\n"						                            \
+	"  setenv preboot\n"						                            \
 	"  echo \n "                                                                                \
 	"  echo \"At the U-Boot prompt type commands: `setenv display <num>`, then type\"\n"        \
 	"  echo \"`saveenv` to save the environment to NAND flash.  This will avoid seeing\"\n"     \
@@ -417,7 +418,7 @@
 	"disablecharging=no\0" \
 	"mmc_bootscript_addr=0x80FF0000\0" \
 	"disablecharging no\0" \
-	"display=15\0" \
+	"display=28\0" \
 	"loadaddr=0x81000000\0" \
 	"kernel_location=mmc \0" \
 	"rootfs_location=mmc \0" \