diff options
author | Tom Warren <twarren.nvidia@gmail.com> | 2011-04-28 07:55:13 -0700 |
---|---|---|
committer | Simon Glass <sjg@chromium.org> | 2011-08-24 09:55:48 -0700 |
commit | a14a954f1ed38a92f83a7b2861e438f21d728027 (patch) | |
tree | cc1da91bba04304ceb3ab5c4049d60dbb57b3160 | |
parent | a39ef1e73b8a8e9dd808ed7b7661ff0ba1ff8db7 (diff) |
spi: Tegra2: Add SPI driver for SPIFLASH on Seaboard
Change-Id: I306129ca7b8851639d7a062d877933e7c520c7ca
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://gerrit.chromium.org/gerrit/190
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
-rw-r--r-- | arch/arm/include/asm/arch-tegra2/tegra2_spi.h | 81 | ||||
-rw-r--r-- | arch/arm/lib/board.c | 3 | ||||
-rw-r--r-- | board/nvidia/common/board.c | 4 | ||||
-rw-r--r-- | drivers/spi/Makefile | 4 | ||||
-rw-r--r-- | drivers/spi/tegra2_spi.c | 315 | ||||
-rw-r--r-- | include/configs/seaboard.h | 10 |
6 files changed, 414 insertions, 3 deletions
diff --git a/arch/arm/include/asm/arch-tegra2/tegra2_spi.h b/arch/arm/include/asm/arch-tegra2/tegra2_spi.h new file mode 100644 index 00000000000..60dc0c8637b --- /dev/null +++ b/arch/arm/include/asm/arch-tegra2/tegra2_spi.h @@ -0,0 +1,81 @@ +/* + * NVIDIA Tegra2 SPI-FLASH controller + * + * Copyright 2010-2011 NVIDIA Corporation + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA2_SPI_H_ +#define _TEGRA2_SPI_H_ + +#include <asm/types.h> + +#define TEGRA2_SPI_BASE 0x7000C380 + +struct spi_tegra { + u32 command; /* SPI_COMMAND_0 register */ + u32 status; /* SPI_STATUS_0 register */ + u32 rx_cmp; /* SPI_RX_CMP_0 register */ + u32 dma_ctl; /* SPI_DMA_CTL_0 register */ + u32 tx_fifo; /* SPI_TX_FIFO_0 register */ + u32 rsvd[3]; /* offsets 0x14 to 0x1F reserved */ + u32 rx_fifo; /* SPI_RX_FIFO_0 register */ + +}; + +#define SPI_CMD_GO (1 << 30) +#define SPI_CMD_ACTIVE_SCLK (1 << 26) +#define SPI_CMD_CK_SDA (1 << 21) +#define SPI_CMD_ACTIVE_SDA (1 << 18) +#define SPI_CMD_CS_POL (1 << 16) +#define SPI_CMD_TXEN (1 << 15) +#define SPI_CMD_RXEN (1 << 14) +#define SPI_CMD_CS_VAL (1 << 13) +#define SPI_CMD_CS_SOFT (1 << 12) +#define SPI_CMD_CS_DELAY (1 << 9) +#define SPI_CMD_CS3_EN (1 << 8) +#define SPI_CMD_CS2_EN (1 << 7) +#define SPI_CMD_CS1_EN (1 << 6) +#define SPI_CMD_CS0_EN (1 << 5) +#define SPI_CMD_BIT_LENGTH (1 << 4) +#define SPI_CMD_BIT_LENGTH_MASK 0x0000001F + +#define SPI_STAT_BSY (1 << 31) +#define SPI_STAT_RDY (1 << 30) +#define SPI_STAT_RXF_FLUSH (1 << 29) +#define SPI_STAT_TXF_FLUSH (1 << 28) +#define SPI_STAT_RXF_UNR (1 << 27) +#define SPI_STAT_TXF_OVF (1 << 26) +#define SPI_STAT_RXF_EMPTY (1 << 25) +#define SPI_STAT_RXF_FULL (1 << 24) +#define SPI_STAT_TXF_EMPTY (1 << 23) +#define SPI_STAT_TXF_FULL (1 << 22) +#define SPI_STAT_SEL_TXRX_N (1 << 16) +#define SPI_STAT_CUR_BLKCNT (1 << 15) + +#define GMD_SEL_SFLASH (3 << 30) +#define GMC_SEL_SFLASH (3 << 2) + +#define SPI_TIMEOUT 1000 + +/* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */ +#define UART_DISABLE_GPIO GPIO_PI3 + +#endif /* _TEGRA2_SPI_H_ */ diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index b7a6a4ee6a7..72aab21dd1b 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -60,7 +60,6 @@ #ifdef CONFIG_DRIVER_LAN91C96 #include "../drivers/net/lan91c96.h" #endif - DECLARE_GLOBAL_DATA_PTR; ulong monitor_flash_len; @@ -511,12 +510,10 @@ void board_init_r (gd_t *id, ulong dest_addr) hang (); } #endif - #if defined(CONFIG_CMD_NAND) puts ("NAND: "); nand_init(); /* go init the NAND */ #endif - #if defined(CONFIG_CMD_ONENAND) onenand_init(); #endif diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index dfab51d05d6..bd68c374cac 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -33,6 +33,7 @@ #include <asm/arch/pinmux.h> #include <asm/arch/uart.h> #include <asm/arch/usb.h> +#include <spi.h> #include "board.h" DECLARE_GLOBAL_DATA_PTR; @@ -199,6 +200,9 @@ int board_init(void) #ifdef CONFIG_USB_EHCI_TEGRA board_usb_init(); #endif +#ifdef CONFIG_TEGRA2_SPI + spi_init(); +#endif return 0; } diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index a9b1ca4c13d..a667c4976f9 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -39,7 +39,11 @@ COBJS-$(CONFIG_OC_TINY_SPI) += oc_tiny_spi.o COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o COBJS-$(CONFIG_SH_SPI) += sh_spi.o +<<<<<<< HEAD COBJS-$(CONFIG_FSL_ESPI) += fsl_espi.o +======= +COBJS-$(CONFIG_TEGRA2_SPI) += tegra2_spi.o +>>>>>>> spi: Tegra2: Add SPI driver for SPIFLASH on Seaboard COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/spi/tegra2_spi.c b/drivers/spi/tegra2_spi.c new file mode 100644 index 00000000000..417fcc8dc74 --- /dev/null +++ b/drivers/spi/tegra2_spi.c @@ -0,0 +1,315 @@ +/* + * Copyright (c) 2010-2011 NVIDIA Corporation + * With help from the mpc8xxx SPI driver + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <malloc.h> +#include <spi.h> +#include <asm/io.h> +#include <asm/arch/clk_rst.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/tegra2_spi.h> + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + /* Tegra2 SPI-Flash - only 1 device ('bus/cs') */ + if (bus > 0 && cs != 0) + return 0; + else + return 1; +} + + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct spi_slave *slave; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + slave = malloc(sizeof(struct spi_slave)); + if (!slave) + return NULL; + + slave->bus = bus; + slave->cs = cs; + + /* + * Currently, Tegra2 SFLASH uses mode 0 & a 24MHz clock. + * Use 'mode' and 'maz_hz' to change that here, if needed. + */ + + return slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + free(slave); +} + +void spi_init(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + struct spi_tegra *spi = (struct spi_tegra *)TEGRA2_SPI_BASE; + u32 reg; + + /* Enable UART via GPIO_PI3 so serial console works */ + gpio_direction_output(UART_DISABLE_GPIO, 0); + + /* + * SPI reset/clocks init - reset SPI, set clocks, release from reset + */ + reset_set_enable(PERIPH_ID_SPI1, 1); + clock_enable(PERIPH_ID_SPI1); + + /* Change SPI clock to 24MHz, PLLP_OUT0 source */ + reg = readl(&clkrst->crc_clk_src_spi1); + reg &= 0x3FFFFF00; /* src = PLLP_OUT0 */ + reg |= ((9-1) << 1); /* div = 9 in 7.1 format */ + writel(reg, &clkrst->crc_clk_src_spi1); + debug("spi_init: ClkSrc = %08x\n", reg); + + /* wait for 2us */ + udelay(2); + + reset_set_enable(PERIPH_ID_SPI1, 0); + + /* Clear stale status here */ + + reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \ + SPI_STAT_RXF_UNR | SPI_STAT_TXF_OVF; + writel(reg, &spi->status); + debug("spi_init: STATUS = %08x\n", readl(&spi->status)); + + /* + * Use sw-controlled CS, so we can clock in data after ReadID, etc. + */ + + reg = readl(&spi->command); + writel((reg | SPI_CMD_CS_SOFT), &spi->command); + debug("spi_init: COMMAND = %08x\n", readl(&spi->command)); + + /* + * SPI pins on Tegra2 are muxed - change pinmux last due to UART issue + */ + reg = readl(&pmt->pmt_ctl_c); + reg |= GMD_SEL_SFLASH; /* GMD_SEL [31:30] = (3) SFLASH */ + writel(reg, &pmt->pmt_ctl_c); + debug("spi_init: PinMuxRegC = %08x\n", reg); + + pinmux_tristate_disable(PIN_LSPI); + + /* + * NOTE: + * Don't set PinMux bits 3:2 to SPI here or subsequent UART data + * won't go out! It'll be correctly set in the actual SPI driver + * before/after any transactions (cs_activate/_deactivate). + */ +} + +int spi_claim_bus(struct spi_slave *slave) +{ + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ +} + +void spi_cs_activate(struct spi_slave *slave) +{ + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + struct spi_tegra *spi = (struct spi_tegra *)TEGRA2_SPI_BASE; + u32 val; + + /* + * Delay here to clean up comms - spurious chars seen around SPI xfers. + * Fine-tune later. + */ + udelay(1000); + + /* We need to dynamically change the pinmux, shared w/UART RXD/CTS */ + val = readl(&pmt->pmt_ctl_b); + val |= GMC_SEL_SFLASH; /* GMC_SEL [3:2] = (3) SFLASH */ + writel(val, &pmt->pmt_ctl_b); + + /* + * On Seaboard, MOSI/MISO are shared w/UART. + * Use GPIO I3 (UART_DISABLE) to tristate UART during SPI activity. + * Enable UART later (cs_deactivate) so we can use it for U-Boot comms. + */ + gpio_direction_output(UART_DISABLE_GPIO, 1); + + /* CS is negated on Tegra, so drive a 1 to get a 0 */ + val = readl(&spi->command); + writel((val |= SPI_CMD_CS_VAL), &spi->command); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + struct spi_tegra *spi = (struct spi_tegra *)TEGRA2_SPI_BASE; + u32 val; + + /* + * Delay here to clean up comms - spurious chars seen around SPI xfers. + * Fine-tune later. + */ + udelay(1000); + + /* We need to dynamically change the pinmux, shared w/UART RXD/CTS */ + val = readl(&pmt->pmt_ctl_b); + val &= ~GMC_SEL_SFLASH; /* GMC_SEL [3:2] = (0) UARTD */ + writel(val, &pmt->pmt_ctl_b); + + /* + * On Seaboard, MOSI/MISO are shared w/UART. + * GPIO I3 (UART_DISABLE) is used to tristate UART in cs_activate. + * Enable UART here by setting that GPIO to 0 so we can do U-Boot comms. + */ + gpio_direction_output(UART_DISABLE_GPIO, 0); + + /* CS is negated on Tegra, so drive a 0 to get a 1 */ + val = readl(&spi->command); + writel((val &= ~SPI_CMD_CS_VAL), &spi->command); +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct spi_tegra *spi = (struct spi_tegra *)TEGRA2_SPI_BASE; + unsigned int status; + int num_bytes = (bitlen + 7) / 8; + int i, ret, tm, bytes, bits, isRead = 0; + u32 reg, tmpdout, tmpdin = 0; + + debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n", + slave->bus, slave->cs, *(u8 *)dout, *(u8 *)din, bitlen); + + ret = tm = 0; + + status = readl(&spi->status); + writel(status, &spi->status); /* Clear all SPI events via R/W */ + debug("spi_xfer entry: STATUS = %08x\n", status); + + reg = readl(&spi->command); + writel((reg |= (SPI_CMD_TXEN | SPI_CMD_RXEN)), &spi->command); + debug("spi_xfer: COMMAND = %08x\n", readl(&spi->command)); + + if (flags & SPI_XFER_BEGIN) + spi_cs_activate(slave); + + /* handle data in 32-bit chunks */ + while (num_bytes > 0) { + tmpdout = 0; + bytes = (num_bytes > 4) ? 4 : num_bytes; + bits = (bitlen > 32) ? 32 : bitlen; + + if (dout != NULL) { + for (i = 0; i < bytes; ++i) + tmpdout = (tmpdout << 8) | ((u8 *) dout)[i]; + } + + num_bytes -= bytes; + dout += bytes; + bitlen -= bits; + + reg = readl(&spi->command); + reg &= ~SPI_CMD_BIT_LENGTH_MASK; + reg |= (bits - 1); + writel(reg, &spi->command); + + /* Write data to FIFO and initiate transfer */ + writel(tmpdout, &spi->tx_fifo); + writel((reg |= SPI_CMD_GO), &spi->command); + + /* + * Wait for SPI transmit FIFO to empty, or to time out. + * The RX FIFO status will be read and cleared last + */ + for (tm = 0, isRead = 0; tm < SPI_TIMEOUT; ++tm) { + status = readl(&spi->status); + + while (status & SPI_STAT_BSY) { + status = readl(&spi->status); + + tm++; + if (tm > SPI_TIMEOUT) { + tm = 0; + break; + } + } + + while (!(status & SPI_STAT_RDY)) { + status = readl(&spi->status); + + tm++; + if (tm > SPI_TIMEOUT) { + tm = 0; + break; + } + } + + if (!(status & SPI_STAT_RXF_EMPTY)) { + tmpdin = readl(&spi->rx_fifo); + isRead = 1; + status = readl(&spi->status); + + /* swap bytes read in */ + if (din != NULL) { + for (i = 0; i < bytes; ++i) { + ((u8 *)din)[i] = (tmpdin >> 24); + tmpdin <<= 8; + } + din += bytes; + } + } + + /* We can exit when we've had both RX and TX activity */ + status = readl(&spi->status); + if (isRead && (status & SPI_STAT_TXF_EMPTY)) + break; + } + + if (tm >= SPI_TIMEOUT) + ret = -1; + + status = readl(&spi->status); + writel(status, &spi->status); /* ACK RDY, etc. bits */ + } + + if (flags & SPI_XFER_END) + spi_cs_deactivate(slave); + + debug("spi_xfer: transfer ended. Value=%08x, status = %08x\n", + tmpdin, status); + + if (ret == -1) + printf("spi_xfer: timeout during SPI transfer, tm = %d\n", tm); + + return ret; +} diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index 696fbff1dd4..b50796334ba 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -41,9 +41,19 @@ #define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */ #define CONFIG_BOARD_EARLY_INIT_F + +/* GPIO */ #define CONFIG_TEGRA2_GPIO #define CONFIG_CMD_TEGRA2_GPIO_INFO +/* SPI */ +#define CONFIG_TEGRA2_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF + /* To select the order in which U-Boot sees USB ports */ #define CONFIG_TEGRA2_USB0 NV_PA_USB3_BASE #define CONFIG_TEGRA2_USB1 NV_PA_USB1_BASE |