summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPeter Tyser <ptyser@xes-inc.com>2009-04-18 22:34:02 -0500
committerWolfgang Denk <wd@denx.de>2009-06-12 20:39:46 +0200
commitd48eb5131d287f52bb85b4c58c8680a2e8e3b641 (patch)
treeef259501574616da98618f83823ed4588cf900fb
parent655b34a78adf60ef260981688837904208883ae9 (diff)
i2c: Remove deprecated individual i2c commands
The following individual I2C commands have been removed: imd, imm, inm, imw, icrc32, iprobe, iloop, isdram. The functionality of the individual commands is still available via the 'i2c' command. This change only has an impact on those boards which did not have CONFIG_I2C_CMD_TREE defined. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
-rw-r--r--README5
-rw-r--r--common/cmd_i2c.c58
-rw-r--r--doc/feature-removal-schedule.txt12
-rw-r--r--include/configs/DU405.h1
-rw-r--r--include/configs/DU440.h1
-rw-r--r--include/configs/MPC8313ERDB.h1
-rw-r--r--include/configs/MPC8349EMDS.h1
-rw-r--r--include/configs/MPC8349ITX.h1
-rw-r--r--include/configs/MPC8360ERDK.h1
-rw-r--r--include/configs/MPC8536DS.h1
-rw-r--r--include/configs/MPC8568MDS.h1
-rw-r--r--include/configs/MPC8569MDS.h1
-rw-r--r--include/configs/MPC8572DS.h1
-rw-r--r--include/configs/MVBLM7.h1
-rw-r--r--include/configs/PMC440.h1
-rw-r--r--include/configs/SIMPC8313.h1
-rw-r--r--include/configs/XPEDITE5200.h1
-rw-r--r--include/configs/XPEDITE5370.h1
-rw-r--r--include/configs/ads5121.h1
-rw-r--r--include/configs/at91rm9200ek.h1
-rw-r--r--include/configs/katmai.h1
-rw-r--r--include/configs/keymile-common.h1
-rw-r--r--include/configs/kmeter1.h1
-rw-r--r--include/configs/korat.h1
-rw-r--r--include/configs/sbc8349.h1
-rw-r--r--include/configs/socrates.h1
26 files changed, 0 insertions, 98 deletions
diff --git a/README b/README
index 142dbccec1a..03ad69a8b6a 100644
--- a/README
+++ b/README
@@ -1315,11 +1315,6 @@ The following options need to be configured:
clock chips. See common/cmd_i2c.c for a description of the
command line interface.
- CONFIG_I2C_CMD_TREE is a recommended option that places
- all I2C commands under a single 'i2c' root command. The
- older 'imm', 'imd', 'iprobe' etc. commands are considered
- deprecated and may disappear in the future.
-
CONFIG_HARD_I2C selects a hardware I2C controller.
CONFIG_SOFT_I2C configures u-boot to use a software (aka
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index c071df73265..fd9f9a44f81 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -1204,7 +1204,6 @@ int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
#endif
-#if defined(CONFIG_I2C_CMD_TREE)
int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
@@ -1314,11 +1313,9 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
cmd_usage(cmdtp);
return 0;
}
-#endif /* CONFIG_I2C_CMD_TREE */
/***************************************************/
-#if defined(CONFIG_I2C_CMD_TREE)
U_BOOT_CMD(
i2c, 6, 1, do_i2c,
"I2C sub-system",
@@ -1341,61 +1338,6 @@ U_BOOT_CMD(
"i2c sdram chip - print SDRAM configuration information\n"
#endif
);
-#endif /* CONFIG_I2C_CMD_TREE */
-U_BOOT_CMD(
- imd, 4, 1, do_i2c_md, \
- "i2c memory display", \
- "chip address[.0, .1, .2] [# of objects]\n - i2c memory display\n" \
-);
-
-U_BOOT_CMD(
- imm, 3, 1, do_i2c_mm,
- "i2c memory modify (auto-incrementing)",
- "chip address[.0, .1, .2]\n"
- " - memory modify, auto increment address\n"
-);
-U_BOOT_CMD(
- inm, 3, 1, do_i2c_nm,
- "memory modify (constant address)",
- "chip address[.0, .1, .2]\n - memory modify, read and keep address\n"
-);
-
-U_BOOT_CMD(
- imw, 5, 1, do_i2c_mw,
- "memory write (fill)",
- "chip address[.0, .1, .2] value [count]\n - memory write (fill)\n"
-);
-
-U_BOOT_CMD(
- icrc32, 5, 1, do_i2c_crc,
- "checksum calculation",
- "chip address[.0, .1, .2] count\n - compute CRC32 checksum\n"
-);
-
-U_BOOT_CMD(
- iprobe, 1, 1, do_i2c_probe,
- "probe to discover valid I2C chip addresses",
- "\n -discover valid I2C chip addresses\n"
-);
-
-/*
- * Require full name for "iloop" because it is an infinite loop!
- */
-U_BOOT_CMD(
- iloop, 5, 1, do_i2c_loop,
- "infinite loop on address range",
- "chip address[.0, .1, .2] [# of objects]\n"
- " - loop, reading a set of addresses\n"
-);
-
-#if defined(CONFIG_CMD_SDRAM)
-U_BOOT_CMD(
- isdram, 2, 1, do_sdram,
- "print SDRAM configuration information",
- "chip\n - print SDRAM configuration information\n"
- " (valid chip values 50..57)\n"
-);
-#endif
#if defined(CONFIG_I2C_MUX)
diff --git a/doc/feature-removal-schedule.txt b/doc/feature-removal-schedule.txt
index b1f0582f7b2..9bbdc0a8322 100644
--- a/doc/feature-removal-schedule.txt
+++ b/doc/feature-removal-schedule.txt
@@ -59,18 +59,6 @@ Who: Wolfgang Denk <wd@denx.de> and board maintainers
---------------------------
-What: Individual I2C commands
-When: April 2009
-Why: Per the U-Boot README, individual I2C commands such as "imd", "imm",
- "imw", etc are deprecated. The single "i2c" command which is
- currently enabled via CONFIG_I2C_CMD_TREE contains the same
- functionality as the individual I2C commands. The individual
- I2C commands should be removed as well as any references to
- CONFIG_I2C_CMD_TREE.
-Who: Peter Tyser <ptyser@xes-inc.com>
-
----------------------------
-
What: Legacy NAND code
When: April 2009
Why: Legacy NAND code is deprecated. Similar functionality exists in
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index d1edd244b4e..cfb30233185 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -211,7 +211,6 @@
/*-----------------------------------------------------------------------
* I2C EEPROM (CAT24WC08) for environment
*/
-#define CONFIG_I2C_CMD_TREE 1
#define CONFIG_HARD_I2C /* I2c with hardware support */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index e6abbdc5f3a..e9ea1bf7d08 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -170,7 +170,6 @@
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CONFIG_I2C_CMD_TREE 1
#define CONFIG_I2C_MULTI_BUS 1
#define CONFIG_SYS_SPD_BUS_NUM 0
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 21aedee8722..52d27a1e404 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -321,7 +321,6 @@
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#define CONFIG_FSL_I2C
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 2d2799e111c..35ab88f080a 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -315,7 +315,6 @@
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index ab6fe55c49b..ef0a09fbd7f 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -95,7 +95,6 @@
#define CONFIG_FSL_I2C
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_OFFSET 0x3000
#define CONFIG_SYS_I2C2_OFFSET 0x3100
#define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 477a1c5821f..138750459d2 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -265,7 +265,6 @@
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {{0x52}} /* Don't probe these addrs */
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index bbb448d55fd..bc1267f49fc 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -337,7 +337,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} /* Don't probe these addrs */
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 77224d98e7b..ac340473716 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -287,7 +287,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 0ee40c61803..77946ceae44 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -239,7 +239,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index b60b3641f48..2aba689664f 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -378,7 +378,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
#define CONFIG_SYS_I2C_SLAVE 0x7F
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index 8f741f58bbf..9fd27e3d573 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -53,7 +53,6 @@
#define CONFIG_FSL_I2C
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_OFFSET 0x3000
#define CONFIG_SYS_I2C2_OFFSET 0x3100
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index fc48bc1db65..012ae798d18 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -230,7 +230,6 @@
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CONFIG_I2C_CMD_TREE 1
#define CONFIG_I2C_MULTI_BUS 1
#define CONFIG_SYS_I2C_MULTI_EEPROMS
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index 79582e16c74..88ea7c7c93b 100644
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -223,7 +223,6 @@
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#define CONFIG_FSL_I2C
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h
index 370aae1c4c6..89ab69272b5 100644
--- a/include/configs/XPEDITE5200.h
+++ b/include/configs/XPEDITE5200.h
@@ -226,7 +226,6 @@
#define CONFIG_SYS_I2C_OFFSET 0x3000
#define CONFIG_SYS_I2C2_OFFSET 0x3100
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
/* I2C EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h
index a353a14e7dd..536e0633858 100644
--- a/include/configs/XPEDITE5370.h
+++ b/include/configs/XPEDITE5370.h
@@ -244,7 +244,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
#define CONFIG_SYS_I2C_OFFSET 0x3000
#define CONFIG_SYS_I2C2_OFFSET 0x3100
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
/* PEX8518 slave I2C interface */
#define CONFIG_SYS_I2C_PEX8518_ADDR 0x70
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index d87902468ee..b1420fa8886 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -287,7 +287,6 @@
#define CONFIG_HARD_I2C /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#if 0
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index a018873fd68..c898c730467 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -266,7 +266,6 @@
#ifdef CONFIG_HARD_I2C
#define CONFIG_CMD_I2C
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 0 /* not used */
#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
#endif
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 0d89594f203..3840267312d 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -129,7 +129,6 @@
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_SPD_BUS_NUM 0 /* The I2C bus for SPD */
#define IIC0_BOOTPROM_ADDR 0x50
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index b2e37ec2220..0fcf692d18b 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -97,7 +97,6 @@
#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */
#define CONFIG_I2C_MULTI_BUS 1
-#define CONFIG_I2C_CMD_TREE 1
#define CONFIG_SYS_MAX_I2C_BUS 2
#define CONFIG_SYS_I2C_INIT_BOARD 1
#define CONFIG_I2C_MUX 1
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index f7fc6c5bff4..61250adfed5 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -314,7 +314,6 @@
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x3000
#define CONFIG_I2C_MULTI_BUS 1
-#define CONFIG_I2C_CMD_TREE 1
#define CONFIG_SYS_MAX_I2C_BUS 2
#define CONFIG_I2C_MUX 1
diff --git a/include/configs/korat.h b/include/configs/korat.h
index eb2c1d43b49..ea6ba8938d7 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -282,7 +282,6 @@
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index edd928d81b5..b89fe12c566 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -279,7 +279,6 @@
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_FSL_I2C
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index becd13eace3..5b91b4d7c7f 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -243,7 +243,6 @@
#define CONFIG_SYS_I2C_OFFSET 0x3000
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
#define CONFIG_SYS_I2C2_OFFSET 0x3100
/* I2C RTC */